This is a kernel, based on androidlover5842's kernel, which is based on CM11 kernel, which is based on Android kernel, which is based on linux kernel.
This is the same androidlover5842's kernel, compiled with much newer GCC 7
- GCC 7.3.0 (armv7-eabihf--musl--bleeding-edge)
- GPU overclock disabled because it will drain your battery
- read ahead restricted because you have low ram
- disabled a lot of cpu governors and hotpluggers because you have low ram
- disabled a lot of USB drivers, ext2/3 drivers, media drivers, debuggers, tracers, PS2, Keyboard drivers, PCMCIA drivers, modem drivers, GPU drivers, because you have low ram
- added MY hotplugger that will really DISABLE cores (you have 4) to save battery whenever possible, screen being ON or OFF
Faster overall system, no tweaks needed, just install via your recovery on top of any CM11-based ROM!
XDA:DevDB Information
cm11 tuned kernel, Kernel for the Samsung Galaxy Grand Quattro
Contributors
fbs
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2018-10-19
Created 2018-10-19
Last Updated 2018-10-19
Source: https://github.com/bemerguy/android_kernel_arubaslim.git
fbs said:
Source: https://github.com/bemerguy/android_kernel_arubaslim.git
Click to expand...
Click to collapse
Can you make it for CM13?
SonOfSparda said:
Can you make it for CM13?
Click to expand...
Click to collapse
Wouldn't this same version work with it?
fbs said:
Wouldn't this same version work with it?
Click to expand...
Click to collapse
Things like WiFi will be broken.
Sent from my ASUS_X00TD using Tapatalk
SonOfSparda said:
Things like WiFi will be broken.
Click to expand...
Click to collapse
But is there a fully working CM13 kernel? If I can get its source I surely can optimize it.
Ps: I don't have the phone to test anymore
good job pro
more battery
Could you lower the processor clock from cm12.1 to 105mhz so you can find more battery?
Everton151 said:
Could you lower the processor clock from cm12.1 to 105mhz so you can find more battery?
Click to expand...
Click to collapse
maybe, where's cm12.1 sources?
I saw too many people saying the only really stable option for this phone was cm11
cm12.1
What I have is only cm12.1 have how to use the sources of it?
Everton151 said:
What I have is only cm12.1 have how to use the sources of it?
Click to expand...
Click to collapse
Where's it from? A thread here? If it has a thread here in the forum, it must have its sources also available for download
Then I may download and try something
fbs said:
Where's it from? A thread here? If it has a thread here in the forum, it must have its sources also available for download
Then I may download and try something
Click to expand...
Click to collapse
https://github.com/Arubadel
Here You Go!
Gautam Maini said:
https://github.com/Arubadel
Here You Go!
Click to expand...
Click to collapse
10 11 and 13 there..
is cm13 kernel working?
fbs said:
10 11 and 13 there..
is cm13 kernel working?
Click to expand...
Click to collapse
Yes this device has a CM13 rom. For CM12.1 I Guess the dev. Only changed device tree! Used cm 13 kernel . Rest Not Sure!
Related
linux kernel 4.1 released why are we still using 3.0? I am just wondering
nhmanas said:
linux kernel 4.1 released why are we still using 3.0? I am just wondering
Click to expand...
Click to collapse
Porting a new linux kernel to a device is not simple. It brings a lot of stability issues if the kernel version is too new, and so most developers stick with a LTS release such as v3.4.104. Most s2 kernels are at kernel version 3.0.101 because it is found to be stable, and so they stick with the mentality that 'if it ain't broke, don't fix it'.
gsstudios said:
Porting a new linux kernel to a device is not simple. It brings a lot of stability issues if the kernel version is too new, and so most developers stick with a LTS release such as v3.4.104. Most s2 kernels are at kernel version 3.0.101 because it is found to be stable, and so they stick with the mentality that 'if it ain't broke, don't fix it'.
Click to expand...
Click to collapse
I really love your kernel and you are the new kernel master of i9100 now for me. Then why don't you use v3.4.104? My friend's phone is s4 mini and he is using a v3.4.x.x kernel. I think it is stable to use
nhmanas said:
I really love your kernel and you are the new kernel master of i9100 now for me. Then why don't you use v3.4.104? My friend's phone is s4 mini and he is using a v3.4.x.x kernel. I think it is stable to use
Click to expand...
Click to collapse
Honestly, I think I don't have enough developing experience to do such task chhapil is also thinking to update linux version, but is also unsure whether to upgrade to a newer version or downgrade to 3.4.104.
gsstudios said:
Honestly, I think I don't have enough developing experience to do such task chhapil is also thinking to update linux version, but is also unsure whether to upgrade to a newer version or downgrade to 3.4.104.
Click to expand...
Click to collapse
Thank you for your replies. I have 2 more questions.
1. What are the pros of upgrading 3.4.104 kernel
2. So our device is official cm12.1 now and sources are online. Will you release a lollipop kernel?
nhmanas said:
Thank you for your replies. I have 2 more questions.
1. What are the pros of upgrading 3.4.104 kernel
2. So our device is official cm12.1 now and sources are online. Will you release a lollipop kernel?
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s2/development-derivatives/kernel-dorimanx-lp-5-x-x-t3145879
nhmanas said:
Thank you for your replies. I have 2 more questions.
1. What are the pros of upgrading 3.4.104 kernel
2. So our device is official cm12.1 now and sources are online. Will you release a lollipop kernel?
Click to expand...
Click to collapse
1. Some pros of updating Linux kernel could include increased speed and security (since 3.0.101 kernels are not updated anymore) .
2. I guess you didn't see my Sig? Noppy already linked my dorimanx lp kernel thread. Yes, it works perfectly with cm12.1, however doesn't work yet on other roms like paranoid android and slimlp.
gsstudios said:
1. Some pros of updating Linux kernel could include increased speed and security (since 3.0.101 kernels are not updated anymore) .
2. I guess you didn't see my Sig? Noppy already linked my dorimanx lp kernel thread. Yes, it works perfectly with cm12.1, however doesn't work yet on other roms like paranoid android and slimlp.
Click to expand...
Click to collapse
omg thats what I'm waiting for thanks for all mate
Only for 5.1 stock Rom!
Based on the motorola source,I merge most changes from cm12.1 ,cm13 and zwliew kernel. Thanks @tycoo @zwliew.
Q1: Why I develope this kernel?
I like to play GT Racing 2 by moto x and TV(use miracast).Using stock rom,there's always lag,Using cm13+zwliew kernel
the video is smooth,but the audio is playing on the phone not the TV.So I decide to port zwliew kernel to stock rom.
Q2:Why this kernel is the best in performance?
This kernel has merged all the optimizations,stable and security updates from cm12.1,cm13 and zwliew kernel,
so it has all the advantages from cm based kernel.CM based kernel has disabled some good features it can't use,this kernel doesn't.
Q3:What's the result?
Use this kernel antutu score > 32000,it's io performance is really amazing! I can play GT Racing 2 by TV perfectly now.
Features:
- smooth,stable,good bettery life
- cpu boost(default disabled,should be enabled by kernel adutor)
- IoScheduler:bfq
- Fast charge
Changelog:
r3
- add fast charge support
TODO:
add more IoScheduler and cpu governor
XDA:DevDB Information
ghost lollipop stock kernel, Kernel for the Moto X
Contributors
army9000
Source Code: https://github.com/mayflowersea/moto_x_kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2016-05-30
Created 2016-05-12
Last Updated 2016-05-29
Reserved
I'm sorry,can you build a new kernel for cm13?
- install with wype?? o not necessary?
- What about battery life??
Thanks mate
diegomartinezlovey said:
- install with wype?? o not necessary?
- What about battery life??
Thanks mate
Click to expand...
Click to collapse
flash use twrp,battery life better than stock and cm
ysop said:
I'm sorry,can you build a new kernel for cm13?
Click to expand...
Click to collapse
I have builded it,you can download it from the download tab.
source:https://github.com/mayflowersea/android_kernel_motorola_ghost
sorry I do not see the link
Thanks,new cm13 kernel works well on AICP 5/12.
lc641 said:
sorry I do not see the link
Click to expand...
Click to collapse
download link is in download tab.
if you use xda labs or other apps maybe you cant see it...
use chrome or other browsers.
Thanks and I found it
if I want to return to the stock kernel that I have flash frimware for fastboot?
lc641 said:
Thanks and I found it
if I want to return to the stock kernel that I have flash frimware for fastboot?
Click to expand...
Click to collapse
you should backup /boot and the file in /system/lib/modules use twrp.
I downloaded the source, as installed, it is not someone can post the compiled binary format.
I'm testing since yesterday, so far everything is great, I was waiting for a kernel for stock rom, so thanks!!!
I downloaded the source, how to install? is not binary format anyone can post the completed form to use TWRP.
luisdev said:
I downloaded the source, how to install? is not binary format anyone can post the completed form to use TWRP.
Click to expand...
Click to collapse
It's in the "Download" tab
can anyone please upload the CM13 flashable kernel to a different source? thanks:good:
mauri82 said:
It's in the "Download" tab
Click to expand...
Click to collapse
Can you upload it and share the link please? ?
Enviado desde mi Moto X mediante Tapatalk
Wau, i installed it on cm13 and the battery life improved a lot
For those who cannot find the download link, open this thread in webview. You should find the download tab on the top of the page.
enioane trait cm13 kernel in octos rom ?
testing last night R2 build... i have 3 hrs of screen and 35% battery left..Very Good
I got 5 hrs on cm13 with this Kernel.
Everything is tuned on, mostly browsing, no gaming.
That is really awesome
This is CyanogenMod, recompiled from Seraph08 sources with (also selfcompiled) Uber Toolchain 4.9. If there are Bugs, they should be identical to Seraph08 version. If there are additional Bugs only to be found in this ROM, please let me know.
One thing though: I'm not a developer. I just recompiled the ROM. So if someone finds a bug and has an idea how to fix it, please tell me.
Sources:
Please see thread of Seraph08, to be found here: http://forum.xda-developers.com/oneplus-2/development/6-0-x-cyanogenmod-13-oneplus-2-t3292436/
Download:
https://www.androidfilehost.com/?w=files&flid=132037
Opengapps:
http://opengapps.org
SuperSU: https://download.chainfire.eu/supersu (will redirect you to the latest version)
XDA:DevDB Information
CyanogenMod 14.1, ROM for the OnePlus 2
Contributors
dansou901, Seraph08, Grarak, Mahdi768
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Testing
Beta Release Date: 2016-12-16
Created 2016-11-27
Last Updated 2016-12-16
For updates, dirty flash (if you are coming from a previous version of exactly this ROM) should be fine, but format system and cache before you flash. First boot will take 5-10 minutes, depending on how many apps you have installed (more apps = longer first boot).
If there is no changelog for a new build, have a look at https://www.cmxlog.com/14.1/oneplus2/ and https://github.com/Seraph08/device_oneplus_oneplus2/commits/cm-14.1.
12.12.2016:
- alert slider is fixed (was broken in build of 6th December)
- updated to Android 7.1.1
05.12.2016:
- SELinux back to permissive
01.12.2016:
- SELinux is enforcing now (V4A users beware)
- Latest version of SuperSU won't break sensors anymore
Some specs of rom would be great
22vlaja said:
Some specs of rom would be great
Click to expand...
Click to collapse
What do you want to know?
New build is up!
dansou901 said:
New build is up!
Click to expand...
Click to collapse
Change log??
Wilguens Joachin said:
Change log??
Click to expand...
Click to collapse
Have a look at Seraphs thread, but SELinux is permissive again (he explains there why). If you want a full changelog of CM, look at https://www.cmxlog.com/14.1/.
Sorry to all but I had to take down the latest build, the alert slider isn't working there. As soon as it's fixed, I'll recompile and reupload. Thanks @KarlDieter for finding this!
dansou901 said:
Sorry to all but I had to take down the latest build, the alert slider isn't working there. As soon as it's fixed, I'll recompile and reupload. Thanks @KarlDieter for finding this!
Click to expand...
Click to collapse
Damn, I just flashed it too lol
Can I dirty flash the Uber version over regular seraph's CM?
Edit: I tried, seems to be working so far.
knpk13 said:
Can I dirty flash the Uber version over regular seraph's CM?
Edit: I tried, seems to be working so far.
Click to expand...
Click to collapse
Thanks for trying out, does everything work for you? I did a clean flash myself, so I can't tell.
What are the advantages of these builds over the official ones? Only UberTC?
Claudiosvs said:
What are the advantages of these builds over the official ones? Only UberTC?
Click to expand...
Click to collapse
It's the sources by Seraph08 and UberTC.
New build is there, thanks @Seraph08 again for the help!
dansou901 said:
New build is there, thanks @Seraph08 again for the help!
Click to expand...
Click to collapse
Please also update the thread title (date). Because otherwise we dont know when there are updates available.
thx
bani1994 said:
Please also update the thread title (date). Because otherwise we dont know when there are updates available.
thx
Click to expand...
Click to collapse
Done, thanks for the hint
New build is up!
Sorry for the noob question but... what are the advantages to use a UBER compiled ROM instead of another one?
aroblu94 said:
Sorry for the noob question but... what are the advantages to use a UBER compiled ROM instead of another one?
Click to expand...
Click to collapse
It boosts up the performance a bit and it's smoother.
dansou901 said:
It boosts up the performance a bit and it's smoother.
Click to expand...
Click to collapse
Well, so why someone still uses another compiler?
Thanks for the answer
After compiling roms for a couple devices and learning about the android rom, i have decided to dabble in the arts
of kernel compiling, i started with my main device the Nexus 6p, learnt a fair bit compiling kernels for it, so i decided to
come back to this device for testing purposes and trying to test and go back to ARM device which is completely different.
Now with the Nexus device i went full updated linux kernel first then gave updates, but this time ill be doing something a little
different, i will upstream some kernel updates, plus caf updates then i will give a release, or for example, the first realease i will
give you guys will be 3.4.2 kernel version, just to get things going, then next release will be a higher version.
I hope all of you like it i will be adding alot of stuff in the coming months.
All releases will keep up to date and working with latest CM roms
Here is the download link just click on the kernel and it will download
XDA:DevDB Information
WinXkernel, Kernel for the LG G3
Contributors
winxuser
Source Code: [url]https://github.com/winxdroid/android_kernel_lge_g3[/URL]
Kernel Special Features:
Version Information
Status: Testing
Created 2017-02-08
Last Updated 2017-02-15
CHANGELOG
15/02/17
updated to 3.4.15
added adreno idler
added new powersuspend
added power efficient workqueue
added voltage control
added kcal
08/02/17
Latest LineageOS kernel update
Updated to 3.4.2
it is compatible to stock rom or fulmics rom?
No it's not, this is for lineageos nougat roms
Could you please give us more info about this kernel? Thanks in advance.
Ducatuca said:
Could you please give us more info about this kernel? Thanks in advance.
Click to expand...
Click to collapse
Well at the moment it's stock lineage kernel,, I am currently upstream IMG the current 3.4.x updates, and it will also have alot of improvements
really good to see another dev on g3 , thanks for effords ! i will try as soon as possible.
Can you inform me about the kernel versions i dont quite understand what the differences are
Thanks
lintol23 said:
Can you inform me about the kernel versions i dont quite understand what the differences are
Thanks
Click to expand...
Click to collapse
Ok so stock stock kernel you get with stock rom or even custom like CyanogenMod/lineageos has a kernel version of 3.4, each incremental update after that eg 3.4.1 or even 3.4.100 has many fixes and updates within the kernel, some do nothing for our device but others can, a small code change in one file can impact the way the kernel works
karasumert98 said:
really good to see another dev on g3 , thanks for effords ! i will try as soon as possible.
Click to expand...
Click to collapse
No worries I have had this device for many years tried, got a new device and just forgot about it lol, like I said I had been working on the Nexus 6p that I have and decided to try out with this one
This kernel reboots after a short period on rr5.8...
kehne said:
This kernel reboots after a short period on rr5.8...
Click to expand...
Click to collapse
I dont know good.. But rr is lineage? This kernel is for lineage if i good understand
Sealant said:
I dont know good.. But rr is lineage? This kernel is for lineage if i good understand
Click to expand...
Click to collapse
Yep, RR based on linage. So basically it should work, but after 10-30sec the ROM reboots
I can't wait for up to 3.4.113
What devices does this kernel support? I have the vs985
Does this work on all lg g3 variants ?. Because I dont want to flash this and brick my lg g3 d852. Thanks
MaddMaxx636 said:
What devices does this kernel support? I have the vs985
Click to expand...
Click to collapse
TeamAndroid14 said:
Does this work on all lg g3 variants ?. Because I dont want to flash this and brick my lg g3 d852. Thanks
Click to expand...
Click to collapse
This kernel only supports d855 as it is the device I have
kehne said:
This kernel reboots after a short period on rr5.8...
Click to expand...
Click to collapse
Well I'm running latest lineageos and I have never had it reboot on me. Are you using any kernel manager apps at all, as I haven't been able to add and customisation to it just it. It may panic because it's reaching for something it doesn't have
No reboots here either,
Im running the latest official Lineage .
if u have kernel mod or any other kernel tuner installed try to go back to your basic settings or just delete the app and install it again after your first boot.
Really smooth kernel !
Hi... Can you had the savoca Patch to use with Wheatstone.apk? Can use my phone without it
Enviado do meu LG-D855 através de Tapatalk
The goal here is both is to play with features which could be later be backported to official kernels, but also ones that probably shouldn't (like fast charging).
I'm basing my work on some existing kernels, but putting a little tuning here and there and making available via anykernel (3, currently) zippable installers. Currently there's only one maintaned branch, for LineageOS 17.1 and derivatives (success reports comes from LoS 15.1 to Non-LOS based roms, YMMV).
Contributors and testers are always welcome.
Due credit to karthik km for his miracledroid kernel and nicknitewolf for his kernel, rom and all his contributions in having our wt88047 devices up-to-date.
XDA:DevDB Information
PolesApart Kernel, Kernel for the Xiaomi Redmi 2
Contributors
PolesApart
Source Code for current branch: https://github.com/polesapart/android_kernel_wingtech_msm8916/commits/lineage-17.1
Downloads: https://github.com/polesapart/android_kernel_wingtech_msm8916/releases
Kernel Special Features: Anykernel 3 Installers; DT2W; KCAL; LiveDisplay; Fast Charging; Wireguard.
Version Information
Status:Gamma (17.1 branch)
Created 2018-07-23
Last Updated 2020-06-01
Reserved
For Changelog, See the github's releases page.
Reserved
Thanks
can i install this kernal on aosp based roms or only for lineage based?
Thanks for your great works
I wish the source updated with the patches that you applied into it, so it will be easier to read and track
Dan_nomad said:
can i install this kernal on aosp based roms or only for lineage based?
Click to expand...
Click to collapse
You'd have to try. If it doesn't work, then you need to flash the rom again or extract the boot.img from the rom's zip and apply via fastboot.
didhiy said:
Thanks for your great works
I wish the source updated with the patches that you applied into it, so it will be easier to read and track
Click to expand...
Click to collapse
The zram branch is up to date. The miracledroid will be when I release anything from it. I'm currently trying a build from the latter(with zram updates) , and the battery consumption when idle seems way better. If I don't catch anything wrong I'll release a build this week.
PolesApart said:
The zram branch is up to date. The miracledroid will be when I release anything from it. I'm currently trying a build from the latter(with zram updates) , and the battery consumption when idle seems way better. If I don't catch anything wrong I'll release a build this week.
Click to expand...
Click to collapse
I mean the commits here:
https://github.com/polesapart/android_kernel_wingtech_msm8916/commits/lineage-15.1
It should represent the changes that you've done into it. It's better than packed your changes as a separate patches zip.
didhiy said:
I mean the commits here:
https://github.com/polesapart/android_kernel_wingtech_msm8916/commits/lineage-15.1
It should represent the changes that you've done into it. It's better than packed your changes as a separate patches zip.
Click to expand...
Click to collapse
In my tree, lineage-15.1 branch will always be even with upstream. That helps me merging. What you're looking for is available both in:
https://github.com/polesapart/android_kernel_wingtech_msm8916/commits/lineage-15.1-polesapart-zram
and in: https://github.com/polesapart/andro.../commits/lineage-15.1-polesapart-miracledroid - but the latter is out of sync, as I tried to explain earlier.
I'll update these URLs on the OT.
PolesApart said:
The zram branch is up to date. The miracledroid will be when I release anything from it. I'm currently trying a build from the latter(with zram updates) , and the battery consumption when idle seems way better. If I don't catch anything wrong I'll release a build this week.
Click to expand...
Click to collapse
PolesApart said:
In my tree, lineage-15.1 branch will always be even with upstream. That helps me merging. What you're looking for is available both in:
https://github.com/polesapart/android_kernel_wingtech_msm8916/commits/lineage-15.1-polesapart-zram
and in: https://github.com/polesapart/andro.../commits/lineage-15.1-polesapart-miracledroid - but the latter is out of sync, as I tried to explain earlier.
I'll update these URLs on the OT.
Click to expand...
Click to collapse
Yaay... I didn't see that branch LOL thanks for your explanation :good:
The 1st build based on miracledroid is now public: https://github.com/polesapart/andro...m8916/releases/tag/20180725-miracledroid-zram
I'm testing (most of) it on my LOS 15.1 stock rom for a few days now and it's smooth.
PolesApart said:
The 1st build based on miracledroid is now public: https://github.com/polesapart/andro...m8916/releases/tag/20180725-miracledroid-zram
I'm testing (most of) it on my LOS 15.1 stock rom for a few days now and it's smooth.
Click to expand...
Click to collapse
Ohhh nooo,headphone is not with this kernal:crying:
Rbqttp said:
Ohhh nooo,headphone is not with this kernal:crying:
Click to expand...
Click to collapse
Yes, this is a heisenbug that manifests every now and then (half the time I change something and rebuild the kernel). I've uploaded another build that works for me, please try it:
https://github.com/polesapart/andro...m8916/releases/tag/20180725-miracledroid-zram
PolesApart said:
Yes, this is a heisenbug that manifests every now and then (half the time I change something and rebuild the kernel). I've uploaded another build that works for me, please try it:
https://github.com/polesapart/andro...m8916/releases/tag/20180725-miracledroid-zram
Click to expand...
Click to collapse
Headphone jack works normally... I like the features in this build, thanks for bring up a custom kernel for us :highfive:
Do you plan to include Wireguard in the kernel?
https://forum.xda-developers.com/android/development/wireguard-rom-integration-t3711635
*update* Wireguard module is available in the kernel available here https://github.com/polesapart/andro...m8916/releases/tag/20180725-miracledroid-zram
@PolesApart an aroma based installer will be nice , i knw its too early, but jst a suggestion. Keep up the gud work bro.:good:
Can i install this on offcial lineageos 15 in my 1gb model redmi 2
Vikhyat01 said:
Can i install this on offcial lineageos 15 in my 1gb model redmi 2
Click to expand...
Click to collapse
Yes , you can.:good:
Will it work on RR oreo