Reassigning hardware buttons - Honor 8X Questions & Answers

Hiya
I'm a new Honor 8x user and have to say I'm blown away by the hardware and by EMUI, especially for the price.
I miss a couple of features from my old Samsung phone and can't find away of replicating them:
Turning on the torch by holding a button, so I don't have to unlock. The Internet tells me this can be done with the fingerprint scanner on the Honor 8 but not the 8x which is a pity.
Any way to do this and what software is the software difference between the two.
I'd also like to long press the volume buttons to skip tracks on Spotify. So I don't have to take my phone out my pocket. (I'm lazy)
Any help appreciated!
Vidvo

For the torch: on the lockscreen, swipe up from the very bottom of the screen and there are some shortcuts.....one is the torch, so you can switch it on and off without unlocking the phone.

iainmann said:
For the torch: on the lockscreen, swipe up from the very bottom of the screen and there are some shortcuts.....one is the torch, so you can switch it on and off without unlocking the phone.
Click to expand...
Click to collapse
Thanks very much for this. I hadn't figured out the home screen upswipe. Although it's a bit quicker I would still love to have control over my buttons - to skip tracks mostly.

Related

[Q] Camera button.

I'm used to my Nokia 808 which allows for the Camera button to jump directly to Camera mode even when the phone is locked. With the S4 Zoom I have to hit power once, swipe then long press camera button. I was wondering if anyone has figured out a way to assign the Camera button to launch Camera app even when locked? I'm sure there must be a button app out there than can be mapped to do this?
ANyone?
Cheers,
Dunker
Haven't heard about this. The fastest way is setting a camera shortcut on lockscreen.
Sent from galaxy n7105
there is an option when you swipe the lockscreen the camera open automatic.
opdrago said:
there is an option when you swipe the lockscreen the camera open automatic.
Click to expand...
Click to collapse
I saw that option, but it's not really ideal, sometimes I just want to use the phone as a phone and not a camera, closing down camera everytime is annoying.
The Nokia 808 worked by long press on camera button and straight to camera (even if locked), or you could swipe screen etc and use the phone like a phone. This was ideal for all circumstances.
Right now I have set to have no lock screen and then just hit the power button once and then long press of camera to get going, but I would prefer just to set the camera shutter button to launch Camera at any time (other than device being powered off).
Perhaps there is a button remapping app?
Spooky!
I had the same thought this afternoon - not actually sure why, was just in an idle moment!
It would be a good and sensible option to have but I've got no answer, other than to have a link on your home screen or just long press the camera button after inputting your PIN code.
Kroy73 said:
Spooky!
I had the same thought this afternoon - not actually sure why, was just in an idle moment!
It would be a good and sensible option to have but I've got no answer, other than to have a link on your home screen or just long press the camera button after inputting your PIN code.
Click to expand...
Click to collapse
I just bought the official Galaxy S4 Zoom case. It has one of those screen flip covers. I noticed when you pull the flip back to access the phone it automatically comes on, therefore once you press the camera button after this yer straight in.
Now i don't know how the flip cover works, whether it's like slightly magnetic and sends a signal etc, but this idea dawned on me...
If you had a simply cheap silicone case (or a screen protector) and had yer S4Z facing down on the desk, when you picked it up and turned it over it would automatically come on, then you press the camera button to launch the camera. That might work. Of course if it's in your pocket then that might not work...
Unfortunately the official case obscures the battery compartment and microsdcard slot, but worst of all the tripod mount! I could live with the others being covered but not the tripod mount. I'm going to attempt to drill a hole in the right location for the tripod mount... wish me luck!

Possible fingerprint scanner mode?

I find my Xperia X still very useful, I'm currently using another phone as my daily phone but I still use my XX to record audios from my practices (I'm musician) and video, because the quality is better than my daily phone's.
However, what got me tired was the fingerprint scanner. It's very inaccurate and fails to unlock the phone almost every time, and I find this very frustrating. I don't know if this happens because I have fat thumbs (LOL), the phone has some defect or there's a problem with the fingerprint/power button. Does anyone else have the some problem?
My real question is: may be possible to remap the power button so it acts only as a fingerprint scanner? Considering that we practically don't need a power button to turn the screen on... My current daily phone is a Honor 8, and I just love the fingerprint scanner in the back, which I use 98% of the time for turning it on and unlocking it at the same time. The thing is that the fingerprint scanner and the power button are not tied as in the XX. I think remaping the power button to act as a fingerprint scanner would give me more chances to try to unlock it before disabling the scanner after many attempts, because the screen would be actually off and it wouldn't be necessary to press the button everytime, it'd be only needed to put my finger on it.
It sounds really complicated I know, but if there's any chance, please tell me. Or, do you think ROMs like AOSP or Cyanogenmod would do this? I'd like to think so, but ufortunately I see poor development for the XX

Tap to wake

Hi. Just wondering if it has tap to wake or if placing your finger on the scanner will wake the device? Thanks
I am curious about this as well
from what I've seen on videos tapping on screen on the wrong spot would illuminate a purple fingerprint where you should put your finger, placing it again on top of that figure would unlock, an you have to actually press firmly not just slight touch as external FP sensors. If you press in the right spot at the first try it unlocks with only just that one single press. I'm hoping it is accurate enough so after we develop some muscle memory it unlocks at the first press 9/10 times.
I wished it had double tap anywhere to wake up/see lock screen/start face id though
Can confirm, tapping only shows where the fingerprint reader is. If you just straight put your finger on it the phone will unlock.
That is so good though..... No need to use power button. Plus if you use smart lock...i assume if your in your home or safe area.... You can avoid even using the fingerprint?
eXelium said:
Can confirm, tapping only shows where the fingerprint reader is. If you just straight put your finger on it the phone will unlock.
Click to expand...
Click to collapse
Bigal77 said:
That is so good though..... No need to use power button. Plus if you use smart lock...i assume if your in your home or safe area.... You can avoid even using the fingerprint?
Click to expand...
Click to collapse
To be honest Mate 20 was silent about smart lock for now. It didn't auto suggest smart lock for any of BT devices I paired or the home Wi-Fi. Maybe I have to enable it manually. Weird the LG V20 I am coming from tried to shove that in my face on all ocassions.
... I did some digging, looks like smart lock for unlocking is not present (Smart Lock itself is on the phone).

LG V30 always on display and KnockON features in low light don't work

Hello,
I'm experiencing a weird problem with my LG V30 H930 and I was wondering what could be the solution, if anyone has ever experienced that as well?
Yesterday I received a new LG V30 phone and that day I found something very disturbing. The "always on display" function does not work when it's too dark in the environment or when I cover the light sensor. This also results in:
- "double tap to wake" function does not work when it is too dark
- holding finger against the screen results in turning off display instead of entering options for changing wallpaper, adding widgets and settings. Additionally when I turn off the screen in this way, I need to press the button on the back of the phone twice, which is also a fingerprint reader and at the right time. If I do it too slowly, i.e. press the button once, wait a bit and then the second time, the screen will not turn on. I have to press it twice and relatively quickly
All of this does not happen when it is bright in the environment.
The phone's never been rooted, there is no custom firmware loaded on it, I've tried many times going back to factory settings.
Lovatnet said:
Hello,
I'm experiencing a weird problem with my LG V30 H930 and I was wondering what could be the solution, if anyone has ever experienced that as well?
Yesterday I received a new LG V30 phone and that day I found something very disturbing. The "always on display" function does not work when it's too dark in the environment or when I cover the light sensor. This also results in:
- "double tap to wake" function does not work when it is too dark
- holding finger against the screen results in turning off display instead of entering options for changing wallpaper, adding widgets and settings. Additionally when I turn off the screen in this way, I need to press the button on the back of the phone twice, which is also a fingerprint reader and at the right time. If I do it too slowly, i.e. press the button once, wait a bit and then the second time, the screen will not turn on. I have to press it twice and relatively quickly
All of this does not happen when it is bright in the environment.
The phone's never been rooted, there is no custom firmware loaded on it, I've tried many times going back to factory settings.
Click to expand...
Click to collapse
Why are you covering the light sensor if you want the AOD on?
You are basically replicating a flip case cover or flipping a phone over on the desk. Of course the AOD will turn off under those circumstances. There's nothing wrong with your phone.
With your display on, just quickly press your finger on the fingerprint sensor to display lock the phone and you will see AOD. Well you also have need the "power key instantly locks" option turned on. But I assume you have that on already.
Of course the AOD works in a dark environment. But in this instance, you are covering the light sensor -- which tells the phone you must have it in a flip cover case or flipped over. When you open the case or flip the phone back on, the AOD comes back on. In your fake way, you must be doing something wrong.
Stop covering the light sensor.
ChazzMatt said:
Why are you covering the light sensor if you want the AOD on?
You are replicating a flip case cover or flipping a phone over on the desk. Of course the AOD will turn off under those circumstances. There's nothing wrong with your phone.
Just quickly press your finger on the fingerprint sensor to display lock the phone and you will see AOD. Well you also have need the "power key instantly locks" option turned on. But I assume you have that on already.
Click to expand...
Click to collapse
I understand your logic, but it is a very weird feature then, not to be able to change wallpaper directly from the home screen, when it is dark in the room or not to be able to turn on the phone double-tapping the screen, which is turned off. Is it perfectly normal as well?
Lovatnet said:
I understand your logic, but it is a very weird feature then, not to be able to change wallpaper directly from the home screen, when it is dark in the room or not to be able to turn on the phone double-tapping the screen, which is turned off. Is it perfectly normal as well?
Click to expand...
Click to collapse
You can change wallpaper and double tap the screen, but go to AOD mode in a NORMAL way. I told you how. Just turn off the display with the fingerprint sensor. AOD. Double tap, display back on.
ChazzMatt said:
You can change wallpaper and double tap the screen, but go to AOD mode in a NORMAL way. I told you how. Just lock the display.
Click to expand...
Click to collapse
Thank you for your time!

General Why must unlocking my phone be so cumbersome?

The simple user experience of unlocking the device on is so bad on Pixel 6. There's just no winning option.
Smart Lock randomly kicks in, so I can't be sure that a single tap of the screen will turn on the phone.
The fingerprint sensor sucks, and requires a tap on the screen just to bring it up. And sometimes I don't even get the option to use my fingerprint.
I don't even like the single-tap gesture to begin with. It means I'm accidentally turning my screen on all the time just when carrying the phone. It almost started a call with my deadbeat father, who I haven't talked to in 20 years
I could go with no screen lock but then I'm locked out of several key features (like viewing my account passwords). Also, pressing the Power button at all on a phone this big is cumbersome, since I then have to reposition my entire hand to go from pressing it to then interacting with the screen.
I'm already rooted because I absolutely needed the Back button to be on the right side. Now I'm hoping modders can fix the unlocking experience because it's the next big issue in my mind.
The fingerprint scanner is actually very good if you set it up right, and will always be displayed with always on display... No tap required. Problem solved
turbosrrgood said:
The fingerprint scanner is actually very good if you set it up right, and will always be displayed with always on display... No tap required. Problem solved
Click to expand...
Click to collapse
Or lift to check turned on rather than AOD.
turbosrrgood said:
...and will always be displayed with always on display... No tap required. Problem solved
Click to expand...
Click to collapse
This is not my experience at all. Sometimes I get a fingerprint sensor icon. Other times my phone is unlocked via Smart Lock and I get an Unlock icon in place of the fingerprint sensor. Other times I get a Lock icon indicating Smart Lock is expired. Other times I get no icon there at all.
If the fingerprint sensor is there and I'm on the dimmed screen, sometimes it'll just light up and deny, and other times it won't even acknowledge that I've put my finger on the sensor.
If the Unlock icon is there, it requires a tap to unlock (no holding!). So that means I have to actually look at the screen and discern which icon is there to know whether I need to tap or hold.
And Lift to Check Phone would be even more problematic for me, since I'm trying to avoid accidental screen interactions and this would only cause more.
On all my other Pixel phones I just touch the back fingerprint sensor and the phone is on. I don't have to think about a dozen different possible states the phone could be in every time I want to turn it on.
Have you tried to recalibrate it via the Pixel tool thing Google has?
Google Pixel - Update and Software Repair
gavingt said:
The simple user experience of unlocking the device on is so bad on Pixel 6. There's just no winning option.
Smart Lock randomly kicks in, so I can't be sure that a single tap of the screen will turn on the phone.
The fingerprint sensor sucks, and requires a tap on the screen just to bring it up. And sometimes I don't even get the option to use my fingerprint.
I don't even like the single-tap gesture to begin with. It means I'm accidentally turning my screen on all the time just when carrying the phone. It almost started a call with my deadbeat father, who I haven't talked to in 20 years
I could go with no screen lock but then I'm locked out of several key features (like viewing my account passwords). Also, pressing the Power button at all on a phone this big is cumbersome, since I then have to reposition my entire hand to go from pressing it to then interacting with the screen.
I'm already rooted because I absolutely needed the Back button to be on the right side. Now I'm hoping modders can fix the unlocking experience because it's the next big issue in my mind.
Click to expand...
Click to collapse
It sounds like smartlock working as intended (which I find useless, and poor security). It will give you an unlock icon instead of the fingerprint. Maybe you simply don't want smart unlock, which is more useful for password only. This seems like more of a matter of figuring out what features you want to use.
If you changed the Animation Scale in Developer Settings then the AOD fingerprint icon can disappear.
turbosrrgood said:
It sounds like smartlock working as intended (which I find useless, and poor security). It will give you an unlock icon instead of the fingerprint. Maybe you simply don't want smart unlock, which is more useful for password only. This seems like more of a matter of figuring out what features you want to use.
Click to expand...
Click to collapse
I never used to use Smart Lock, but on this phone it means I don't have to deal with the inconsistent fingerprint sensor as often.
gavingt said:
I never used to use Smart Lock, but on this phone it means I don't have to deal with the inconsistent fingerprint sensor as often.
Click to expand...
Click to collapse
Try setting up the fingerprint scanner again, slightly moving your finger with ever press during set up to get every angle and view of the print. It's been pretty much perfect for me. I suppose Google could have helped instruct people to do that better in the process.
turbosrrgood said:
It sounds like smartlock working as intended (which I find useless, and poor security). It will give you an unlock icon instead of the fingerprint. Maybe you simply don't want smart unlock, which is more useful for password only. This seems like more of a matter of figuring out what features you want to use.
Click to expand...
Click to collapse
I just restarted my phone, and then repeatedly unlocked and locked it (sometimes by fingerprint, sometimes by tapping). By the end of the video, the fingerprint sensor icon disappeared completely and wouldn't come back until after another restart:
Streamable Video
Watch this video on Streamable.
streamable.com
This is just one example of the inconsistencies. I haven't changed the animation settings either.
I did see it happen a couple of times in your stream. I don't recall seeing that on mine, but I haven't been looking for it. The only other thing I can suggest is make sure you have the latest updates and/or factory reset.
Edit - I tried to replicate your stream, and the sensor showed in all 30 attempts for me. For whatever it's worth, so might be something specific to your device, maybe settings or software issue
turbosrrgood said:
I did see it happen a couple of times in your stream. I don't recall seeing that on mine, but I haven't been looking for it. The only other thing I can suggest is make sure you have the latest updates and/or factory reset.
Edit - I tried to replicate your stream, and the sensor showed in all 30 attempts for me. For whatever it's worth, so might be something specific to your device, maybe settings or software issue
Click to expand...
Click to collapse
It could be a bug related to my specific settings:
Rooted device, still on the October update
Lock after screen timeout: 30 minutes
Power button locks instantly: Off
gavingt said:
I just restarted my phone, and then repeatedly unlocked and locked it (sometimes by fingerprint, sometimes by tapping). By the end of the video, the fingerprint sensor icon disappeared completely and wouldn't come back until after another restart:
Streamable Video
Watch this video on Streamable.
streamable.com
This is just one example of the inconsistencies. I haven't changed the animation settings either.
Click to expand...
Click to collapse
what are you going on about lol. this is the kind of nonsense that is so irritating. you had 100% success rate unlocking your phone. what's the problem. looks to me like it works. so what's the big deal. and then you have the gall to complain that the sensor icon disappeared after you repeatedly locked and unlocked your phone? yea. try starting your car repeatedly. see what happens with the engine.
kramer987 said:
what are you going on about lol. this is the kind of nonsense that is so irritating. you had 100% success rate unlocking your phone. what's the problem. looks to me like it works. so what's the big deal. and then you have the gall to complain that the sensor icon disappeared after you repeatedly locked and unlocked your phone? yea. try starting your car repeatedly. see what happens with the engine.
Click to expand...
Click to collapse
Sure, ignore my multiple posts on the subject. It's not nonsense. I have no idea why you're trying to minimize this, and why you feel the need to be so combative.
gavingt said:
I'm already rooted because I absolutely needed the Back button to be on the right side.
Click to expand...
Click to collapse
You know gesture navigation is a thing now right? Back buttons are so "last decade".
sic0048 said:
You know gesture navigation is a thing now right? Back buttons are so "last decade".
Click to expand...
Click to collapse
Yes, I know and I hate it. It's extra motion that tires out my hand and I often trigger the gestures when I don't mean to.
gavingt said:
Sure, ignore my multiple posts on the subject. It's not nonsense. I have no idea why you're trying to minimize this, and why you feel the need to be so combative.
Click to expand...
Click to collapse
i will just apologize and go on with my day. good luck with the phone.
I went ahead and updated to the November firmware, and wiped my data as well. Now my phone won't show the fingerprint sensor while unlocking under any circumstances. I also found an interesting bug wherein I'm still able to turn my screen on by tapping it repeatedly even with "Tap to check phone" disabled:
screen-20211102-164842[1]
Watch "screen-20211102-164842[1]" on Streamable.
streamable.com
EDIT: And, of course, as I was typing this the fingerprint sensor just magically came back. And it still doesn't work unless I tap the dimmed screen to wake it first. Watch as it straight up ignores my finger the first time:
screen-20211102-171057[1]
Watch "screen-20211102-171057[1]" on Streamable.
streamable.com
I can recreate this 100% of the time by just setting my phone down for a second and picking it back up, then trying to unlock it. And you can't see it in the video, but the sensor doesn't even light up the first time I touch it. This is clearly a software bug.
gavingt said:
I went ahead and updated to the November firmware, and wiped my data as well. Now my phone won't show the fingerprint sensor while unlocking under any circumstances. I also found an interesting bug wherein I'm still able to turn my screen on by tapping it repeatedly even with "Tap to check phone" disabled:
screen-20211102-164842[1]
Watch "screen-20211102-164842[1]" on Streamable.
streamable.com
EDIT: And, of course, as I was typing this the fingerprint sensor just magically came back. And it still doesn't work unless I tap the dimmed screen to wake it first. Watch as it straight up ignores my finger the first time:
screen-20211102-171057[1]
Watch "screen-20211102-171057[1]" on Streamable.
streamable.com
I can recreate this 100% of the time by just setting my phone down for a second and picking it back up, then trying to unlock it.
Click to expand...
Click to collapse
but at least we know you like dunkin donuts, dominos pizza, and your mom forgets stuff
kramer987 said:
try starting your car repeatedly. see what happens with the engine.
Click to expand...
Click to collapse
Guess you don't know anything about cars. You can start and stop a fuel injected car until the battery dies, and nothing will happen to the engine or fuel system. (Yes, the battery will die if you keep starting the car and tuning it off right away) Just as proof of this, most modern cars shut off the engine when you come to a stop, and restart when you let off the brake. If you're in stop and go traffic, the engine will shut off and turn on repeatedly in a short amount of time nd distance.
Now with classic cars and motorcycles, you my flood the carb with repeated starts. Not a big deal, and not any kind of damage.
The only "damage" in repeatedly starting a car would be normal wear and tear on the starter. They do have a finite lifespan. But again, not damage, just use.

Categories

Resources