MTP does not work in TWRP on the Pixel 3 and will not work until we have time to update the TWRP MTP implementation. You may still use adb to push and pull files.
Pixel devices have 2 "slots" for ROMs / firmware. TWRP will detect whichever slot is currently active and use that slot for backup AND restore. There are buttons on the reboot page and under backup -> options to change slots. Changing the active slot will cause TWRP to switch which slot that TWRP is backing up or restoring. You can make a backup of slot A, switch to B, then restore the backup which will restore the backup of A to slot B. Changing the slot in TWRP also tells the bootloader to boot that slot.
The zip install method installs TWRP to both slots.
Installation:
If you already have TWRP installed: Download the latest zip and install the zip using TWRP.
If you do not already have TWRP installed: Download both the img and the zip. Copy the zip to your device. You will need to have fastboot binaries and the correct drivers installed. Power off your device completely. Hold volume down and turn on the device. Your device should now be in the bootloader. Connect the device to your PC. Open a command window and run the following command from the proper location:
fastboot boot path/to/twrp.img
This will temporarily boot TWRP on your device. If you are using a lockscreen pin/pattern/password and do not get prompted to enter your passord, reboot to the bootloader and try again. Go to install and browse to the zip and install the zip. If you are currently rooted, you will need to reflash the stock boot image before installing TWRP. After installing the stock boot image, follow the instructions for installing TWRP. Once TWRP is installed, you will need to reflash root.
If you accidently flash TWRP to your device using fastboot instead of temporarily booting the image, you will need to download the latest factory image for your device and reflash the boot image.
3.2.3-0: Initial release for the Pixel 3 devices
Pixel 3:
https://twrp.me/google/googlepixel3.html
https://dl.twrp.me/blueline/
Pixel 3 XL:
https://twrp.me/google/googlepixel3xl.html
https://dl.twrp.me/crosshatch/
Reserved.
You are the man! Cant believe we have TWRP this early! Just in time for the next OTA!
Thank you for this! Great work, it feels like an early Christmas!
All set up with TWRP and rooted again,,even made a back up,,,awesome job to the dev!
Thanks you!
Is anyone having the touchscreen not work after a reboot?
Archangel said:
All set up with TWRP and rooted again,,even made a back up,,,awesome job to the dev!
Click to expand...
Click to collapse
I got twrp up and running on my Pixel 3, but when try to install magisk 17.3 via twrp it says it completes but just bootloops. And I have to restore again. How did you go about it?
code_311 said:
Is anyone having the touchscreen not work after a reboot?
Click to expand...
Click to collapse
On the Pixel 2 XL touch was broken unless you used a custom kernel. I guess it's the same on 3. If you boot TWRP using fastboot it should allow touchscreen.
You would think after buying the Pixel 1, 2 and 3 I would have this whole A/B slot thing down pat but I dont LOL. That did the same thing for me too. I just rebooted into recovery and flashed TWRP again and it has been fine since. I think sometimes it switches slots and that causes the bootloop. I messed around with changing slots and I think I am on slot A and all if fine for me.
Mrnicgeuy633 said:
I got twrp up and running on my Pixel 3, but when try to install magisk 17.3 via twrp it says it completes but just bootloops. And I have to restore again. How did you go about it?
Click to expand...
Click to collapse
---------- Post added at 02:53 PM ---------- Previous post was at 02:52 PM ----------
I had that happen I think once and I just rebooted back into TWRP and it was fine.
code_311 said:
Is anyone having the touchscreen not work after a reboot?
Click to expand...
Click to collapse
Hey guys - I'm a pixel noob and have a quick question about TWRP/Magisk.
I was rooted before TWRP came out so I flashed the stock boot images back to slots A and B. Then I followed steps 2-12 of the following article to install both Magisk and TWRP using temp TWRP. https://www.xda-developers.com/google-pixel-3-unlock-bootloader-root-magisk/
My question is... when I was temp booted into TWRP, and installed the Magisk zip file, it only said that it installed to slot A. But when I was rooted before TWRP released I remember I had to flash the patched boot image to both slots. So using the process I followed, do I have one slot rooted and the other not? If so, is that a problem? Phone seems to work perfectly and root is working.
Sorry if this is a dumb question. I've always been a HTC guy but I'm trying
ktdt00 said:
Hey guys - I'm a pixel noob and have a quick question about TWRP/Magisk.
I was rooted before TWRP came out so I flashed the stock boot images back to slots A and B. Then I followed steps 2-12 of the following article to install both Magisk and TWRP using temp TWRP. https://www.xda-developers.com/google-pixel-3-unlock-bootloader-root-magisk/
My question is... when I was temp booted into TWRP, and installed the Magisk zip file, it only said that it installed to slot A. But when I was rooted before TWRP released I remember I had to flash the patched boot image to both slots. So using the process I followed, do I have one slot rooted and the other not? If so, is that a problem? Phone seems to work perfectly and root is working.
Sorry if this is a dumb question. I've always been a HTC guy but I'm trying
Click to expand...
Click to collapse
No, only the current slot needs to be rooted.
Hello,
I apparently have one of these Pixel 3's that are not working with the current version of TWRP (twrp-3.2.3-0-blueline.img). Yes, I have a 3, not a 3XL. I have done these a hundred times before so I am fairly confident I am not doing anything wrong either. I get the file to load through ADB but on the reboot, it just hangs on the Google screen forever. I have left it for an hour. I have tried everything I can think of. Does anyone have any advice or is in the same situation? I just got my Pixel 3 in the mail on Friday so it's as fresh as they come. I was thinking of fully flashing the TWRP image, but I really don't think it's going to make any difference and I don't want the extra hassle of tracking down the official boot.img from the repo. I guess I will just have to wait until someone who really knows how to debug these comes across one like mine. Clearly, something has changed in what Google is sending out.
For reference:
Android security patch level: September 5,2018
Baseband version: g845-00023-180815-B-4956438
Kernel Version: 4.9.96-g340a9aaf92bc-ab4959234 #0 Thu Aug 16 23:24:20 UTC 2018
Build number: PD1A.180720.031
Much appreciated! $50 donation to anyone who can get me past this and rooted. I'm an old-time Verizon unlimited data planner and I need that tether check disabled.
Is root
To Pixel 3 owners that succesfully rooted, can you share the build.prop here? /system/build.prop
when i booted in to twrp it was encrypted! but i didnt have a PW.... so for everyone to whom that happens, boot up normally and disable your pin ! then you can see your storage in twrp!
i almost flipped this morning hahahaha
Carmenlove said:
Hello,
I apparently have one of these Pixel 3's that are not working with the current version of TWRP (twrp-3.2.3-0-blueline.img). Yes, I have a 3, not a 3XL. I have done these a hundred times before so I am fairly confident I am not doing anything wrong either. I get the file to load through ADB but on the reboot, it just hangs on the Google screen forever. I have left it for an hour. I have tried everything I can think of. Does anyone have any advice or is in the same situation? I just got my Pixel 3 in the mail on Friday so it's as fresh as they come. I was thinking of fully flashing the TWRP image, but I really don't think it's going to make any difference and I don't want the extra hassle of tracking down the official boot.img from the repo. I guess I will just have to wait until someone who really knows how to debug these comes across one like mine. Clearly, something has changed in what Google is sending out.
For reference:
Android security patch level: September 5,2018
Baseband version: g845-00023-180815-B-4956438
Kernel Version: 4.9.96-g340a9aaf92bc-ab4959234 #0 Thu Aug 16 23:24:20 UTC 2018
Build number: PD1A.180720.031
Much appreciated! $50 donation to anyone who can get me past this and rooted. I'm an old-time Verizon unlimited data planner and I need that tether check disabled.
Click to expand...
Click to collapse
Flash the stock boot image. Then try to fastboot boot "path to TWRP". If it still hangs, redownload TWRP and try again. Here's the stock boot for Pixel 3... https://drive.google.com/file/d/1EMkcRkH7n-1bGlVbbzcEJKKPJeE4l9mB/view?usp=drivesdk
jsauder2 said:
Flash the stock boot image. Then try to fastboot boot "path to TWRP". If it still hangs, redownload TWRP and try again. Here's the stock boot for Pixel 3... https://drive.google.com/file/d/1EMkcRkH7n-1bGlVbbzcEJKKPJeE4l9mB/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks! I will give it a try this morning after some coffee. I learned a cool trick last night to get my hotspot to work un-rooted, so I am less desperate than I was last night.
Carm
freebordjunky said:
when i booted in to twrp it was encrypted! but i didnt have a PW.... so for everyone to whom that happens, boot up normally and disable your pin ! then you can see your storage in twrp!
i almost flipped this morning hahahaha
Click to expand...
Click to collapse
Just enter your PIN at the TWRP prompt and it will work.
Mrnicgeuy633 said:
I got twrp up and running on my Pixel 3, but when try to install magisk 17.3 via twrp it says it completes but just bootloops. And I have to restore again. How did you go about it?
Click to expand...
Click to collapse
I have a similar problem. After installing twrp, I can boot to the OS, but Magisk isn't installed and I don't have root. After going back to Twrp and flashing the magisk zip, i can't get past the bootloader screen with a error saying something about failed to load boot.img.
Re-fastboot flashing the patched boot img to both slots brings me back to a rooted state with all magisk modules loaded and applied, but no more twrp. I technically don't need twrp for anything except for nandroid backups, but I guess i could just backup using the adb backup commands and get similar results, right?
Either way, I'm open to suggestions for how to get twrp and magisk working at the same time.
Related
Hello,
I've unlocked my bootloader and subsequently had installed TWRP (months ago).
Not long after, I decided to go back to stock for a while, and went back to CM a month ago.
However, I realized back then that I was loading into stock recovery even after taking the steps to install TWRP (http://forum.xda-developers.com/honor-5x/development/root-kiw-l24-usa-kiwi-t3305190)
During these steps, there were no errors (fastboot/adb logs show all things were done successfully).
However, some funky quirk (that I don't remember) got me loaded with TWRP once, which gave me the window to install CM (I remember it involving having to be connected to the PC).
Now I'm trying to install a new CM build, but I can't get it loading TWRP.
I've downloaded the TWRP Manager App, which tells me that I have TWRP 3.0.0.0, but when I reboot to recovery, I am given the stock EMUI recovery.
Does anyone know what is happening in this case? Has anyone experienced a similar issue?
Thank you!
undesputed said:
Hello,
I've unlocked my bootloader and subsequently had installed TWRP (months ago).
Not long after, I decided to go back to stock for a while, and went back to CM a month ago.
However, I realized back then that I was loading into stock recovery even after taking the steps to install TWRP (http://forum.xda-developers.com/honor-5x/development/root-kiw-l24-usa-kiwi-t3305190)
During these steps, there were no errors (fastboot/adb logs show all things were done successfully).
However, some funky quirk (that I don't remember) got me loaded with TWRP once, which gave me the window to install CM (I remember it involving having to be connected to the PC).
Now I'm trying to install a new CM build, but I can't get it loading TWRP.
I've downloaded the TWRP Manager App, which tells me that I have TWRP 3.0.0.0, but when I reboot to recovery, I am given the stock EMUI recovery.
Does anyone know what is happening in this case? Has anyone experienced a similar issue?
Thank you!
Click to expand...
Click to collapse
Reinstallt it try this TWRP http://www.mediafire.com/download/15g5i63gke9ddgp/kiwi_twrp_3-21_recovery.img its version 3.0.2.0 (Most recent)
The most recent is 5-14 (also based on v3.0.2.0 ).
TWRP 5.14
3-21 was built on March 21, and 5-14 on May 14.
mooms said:
The most recent is 5-14 (also based on v3.0.2.0 ).
TWRP 5.14
3-21 was built on March 21, and 5-14 on May 14.
Click to expand...
Click to collapse
Just for the record I'm using a even newer one than the 5-14 posted above
@yuweng posted a version of 3.0.2.0 that will make images of many partitions on the phone that even 5-14 ignores
you can download it here >> https://www.androidfilehost.com/?fid=24588212152305793
please note it was discovered early on that you cannot share the oeminfo partition on the phone, it's locked to your device and can / will brick a phone it's not from. just be careful what you restore with such a powerful version of TWRP.
@undesputed
I have seen this before where flashing TWRP does not seem to stick.
boot to the bootloader and see if frp is unlocked ... if not you need to
boot to your OS and remove your google account from the device
reboot to the bootloader and attempt the flash again. if it still fails to stick you can always just use
fastboot boot twrp.img and it will work just fine... just not installed
Arobase40 said:
Do you mean 3.0.2.0 is newer and supports more partitions than 5-14 ???
Click to expand...
Click to collapse
Their both 3.0.2.0 the one I just posted has more features
Sent from my SM-N920T using Tapatalk
clsA said:
Just for the record I'm using a even newer one than the 5-14 posted above
@yuweng posted a version of 3.0.2.0 that will make images of many partitions on the phone that even 5-14 ignores
you can download it here >> https://www.androidfilehost.com/?fid=24588212152305793
please note it was discovered early on that you cannot share the oeminfo partition on the phone, it's locked to your device and can / will brick a phone it's not from. just be careful what you restore with such a powerful version of TWRP.
@undesputed
I have seen this before where flashing TWRP does not seem to stick.
boot to the bootloader and see if frp is unlocked ... if not you need to
boot to your OS and remove your google account from the device
reboot to the bootloader and attempt the flash again. if it still fails to stick you can always just use
fastboot boot twrp.img and it will work just fine... just not installed
Click to expand...
Click to collapse
@clsA
frp is labeled as "UNLOCK" as oppsed to bootloader labeled as "UNLOCKED".
If it's just about removing my google account, will this be resolved the next time I do a factory reset?
Nevertheless, thank you so much for the command fastboot boot twrp.img, I realized that that was what I had used the last time.
I'm currently able to boot into TWRP this way. Awesome!
@clsA
Thanks for the link & infos.
Can you tell which features are added in this new TWRP ? name of the partitions ?
Thanks.
mooms said:
@clsA
Thanks for the link & infos.
Can you tell which features are added in this new TWRP ? name of the partitions ?
Thanks.
Click to expand...
Click to collapse
it would be much easier to just install it and test it for yourself
I did find a bug it would not backup to my OTG stick
clsA said:
it would be much easier to just install it and test it for yourself
I did find a bug it would not backup to my OTG stick
Click to expand...
Click to collapse
I don't use all the features, so i will maybe miss the changes.
Never used OTG to made a backup (I use ext_SD), I don't know if it works with other builds of TWRP.
mooms said:
I don't use all the features, so i will maybe miss the changes.
Never used OTG to made a backup (I use ext_SD), I don't know if it works with other builds of TWRP.
Click to expand...
Click to collapse
USB-OTG works flawlessly on the 5-14 version I was not able to use it with the newer one @yuweng posted in his guide
the screen shots show all the partitions it's able to work with
Arobase40 said:
I thought 3.0.2.0 was just an interim version between twrp_2-27 and twrp_5-14... ^^
Click to expand...
Click to collapse
your confusing TWRP versions with TWRP release dates
2-27 and 5-14 are release dates where as 3.0.2.0 is the version of TWRP not the date
the first version of TWRP for this device was actually 2.8.7.0 and was released on 2-16-2016
Same issue
Hey so I have the same exact issue umm did you ever resolve this problem becuSe I can't seem to crack it and it's a bit frustrating cuz by no means am I a pro but coming from using the OnePlus one the OnePlus 2 the OnePlus x and the Nexus 6 rooting them and restoring them after many failed attempts resulting in bricking my phone and even eventually unbrick them I do know a thing or two and I am stumped please help you are the only other person in this world other then my self that seems to be having this issue if you don't mind would you be so kind and email gmail me cuz I don't use or check this forum often thanks millerfamily805
clsA said:
Just for the record I'm using a even newer one than the 5-14 posted above
@yuweng posted a version of 3.0.2.0 that will make images of many partitions on the phone that even 5-14 ignores
you can download it here >> https://www.androidfilehost.com/?fid=24588212152305793
please note it was discovered early on that you cannot share the oeminfo partition on the phone, it's locked to your device and can / will brick a phone it's not from. just be careful what you restore with such a powerful version of TWRP.
@undesputed
I have seen this before where flashing TWRP does not seem to stick.
boot to the bootloader and see if frp is unlocked ... if not you need to
boot to your OS and remove your google account from the device
reboot to the bootloader and attempt the flash again. if it still fails to stick you can always just use
fastboot boot twrp.img and it will work just fine... just not installed
Click to expand...
Click to collapse
Can it be used with other honor devices?
Got my answer... Thanks...
Sent from my PLK-L01 using XDA Labs
It depend on the device
TLDR: It's here and it may eat your data, and you will lose SuperSU root if currently installed. READ the install instructions carefully!
Pixel XL
Pixel
DO NOT RESTORE DATA FROM alpha builds of TWRP using RC1. You will probably lose all data including internal storage. If you need to restore a data backup from an alpha build, reinstall the alpha and restore using the alpha and make a new backup using RC1.
Note: Do not use if you have multiple users (including a guest user)
File Based Encryption (FBE) can be a bit tricky. If a restore doesn't work correctly, it can trigger an automatic wipe of your data. Sometimes TWRP will fail to prompt you to enter your password or otherwise fail to set up decrypt properly. If this happens, reboot TWRP. It seems to be some kind of timing issue and I haven't had time to track it down yet.
Pixel devices have 2 "slots" for ROMs / firmware. TWRP will detect whichever slot is currently active and use that slot for backup AND restore. There are buttons on the reboot page and under backup -> options to change slots. Changing the active slot will cause TWRP to switch which slot that TWRP is backing up or restoring. You can make a backup of slot A, switch to B, then restore the backup which will restore the backup of A to slot B. Changing the slot in TWRP also tells the bootloader to boot that slot.
The zip install method installs TWRP to both slots.
Installation:
If you already have TWRP installed: Download the latest zip and install the zip using TWRP.
If you do not already have TWRP installed: Download both the img and the zip. Copy the zip to your device. You will need to have fastboot binaries and the correct drivers installed. Power off your device completely. Hold volume down and turn on the device. Your device should now be in the bootloader. Connect the device to your PC. Open a command window and run the following command from the proper location:
fastboot boot path/to/twrp.img
This will temporarily boot TWRP on your device. If you are using a lockscreen pin/pattern/password and do not get prompted to enter your passord, reboot to the bootloader and try again. Go to install and browse to the zip and install the zip. If you are currently rooted with SuperSU, you will need to reflash the stock boot image before installing TWRP. After installing the stock boot image, follow the instructions for installing TWRP. Once TWRP is installed, grab the very latest SuperSU released on 2015-11-15 or later and install SuperSU.
If you accidently flash TWRP to your device using fastboot instead of temporarily booting the image, you will need to download the latest factory image for your device and reflash the boot image.
NOTE about 3.2.1-0: This version will decrypt Android 8.1, however the new image is built in Android 8.1 and may not be compatible with SuperSU and/or Magisk until they update their stuff. I have not tested. Good luck.
3.2.1-1 has working decrypt with the February security patch!
3.2.1-2 fixes some zip install errors
3.2.3-1 supports decrypting Android 9.0 Pie even with a pin / pattern / password set
How to install SuperSU SR5 on TWRP RC1: In TWRP tap on Advanced -> File Manager and scroll to and select the fstab.marlin or fstab.sailfish file and then delete it.
You're the man! Props for all the hard work you've put into this.
TY!!!!
Awesome. I might have to wait a bit to install but glad to see the Pixel getting twrp.
Sent from my Pixel XL using Tapatalk
Wow, and so it begins. Thanks!
Thank you!!
Nice!!! Awesome job @Dees_Troy
Sent from my Pixel XL using Tapatalk
I just installed the IMG w/out issue.
I can't find the zip in TWRP file manager to flash though.
Everything looks encrypted.
EDIT: It went through on the 4th try of flashing the IMG, now I can see my /sdcard and install the zip.
But somehow this killed my OS.
Just flashed the flash-all.bat after removing -w so it doesn't wipe.
Now I'll try TWRP install again.
EDIT 2: Okay, after restoring to stock, the TWRP install went fine.
Maybe it didn't like my elementalx kernel or the existing root. The OP did mention something about root conflicts, I guess it may prevent TWRP installs too? But now I have OS *and* TWRP.
And I'm getting "Unspecified Error" when trying to copy my EFS backup from /sdcard/twrp/backup to my local computer. I am able to copy other non-TWRP files though.
.
.
.
Does a full backup on Pixel include System Image and Vendor Image? I don't recall seeing these on other devices.
Or do I just back up boot, system and data like usual?
***Hey ya'll, don't forget to back up EFS at least once and copy it to your computers!
Yea! Worked perfect!!!
Would the flashable SuperSU v2.78 SR3 zip work?
Looked it up and because of conflicting init binaries between TWRP and the current root method, it just wouldn't work.
While we're still on or near the first page of the thread, I'd like to clarify the whole EFS backup thing.
It's completely unnecessary. You don't need to do it. But the option is there (so no one asks where it went!)
Both the modemst1 and modemst2 partitions are merely a caching area for your modem firmware. They do not contain sensitive data like IMEI, or anything important. You can wipe them and they will be regenerated from scratch! Have no fear, your IMEI cannot be destroyed through means of bad flashes!
The issue with these partitions however is that should they ever become corrupt, the modem firmware will panic and fail to load - this is why you see your IMEI missing in such a case. The modem firmware simply refused to load due to encountering corrupt data. By clearing your modemst partitions (writing zeros to them), your modem firmware would happily load and regenerate the partitions, bringing back full call support & a visible IMEI.
Okay, I have TWRP + OS working fine after restoring to stock (getting rid of kernel + root).
Now to just wait for custom ROM's to drop. Thanks guys.
The ability to restore EFS was pretty important on some older phones.
Yep just want to let ya guys know might want return to stock before doing this. Besides that all good. Good job TWRP team! :good:
CZ Eddie said:
Okay, I have TWRP + OS working fine after restoring to stock (getting rid of kernel + root).
Now to just wait for custom ROM's to drop. Thanks guys.
The ability to restore EFS was pretty important on some older phones.
Click to expand...
Click to collapse
Are you rerooting after getting TWRP to work? Have you tried a backup and restore yet?
kirschdog1 said:
Are you rerooting after getting TWRP to work? Have you tried a backup and restore yet?
Click to expand...
Click to collapse
FYI on OP - A SuperSU update will be required to allow TWRP and SuperSU to co-exist.
kirschdog1 said:
Are you rerooting after getting TWRP to work? Have you tried a backup and restore yet?
Click to expand...
Click to collapse
yes
no
I stubbornly flashed v2 root and got boot hang so I put the phone up for the night.
delete
CZ Eddie said:
yes
no
I stubbornly flashed v2 root and got boot hang so I put the phone up for the night.
Click to expand...
Click to collapse
Do we still flash root the same way after we install TWRP? Or is there an su zip to flash?
Hooray! Cheers!
Return to Un-modded Stock:
Bootloader unlocked and TWRP and Root included
The file is 4gb compressed to 2gb. Depending on your connection it will probably take 20 to 45 minutes to download.
Be Advised
Do your research before flashing anything, I am not responsible for any damage caused to your device, due to impatience and missed steps. However, rest assured this recovery is solid and will absolutely return your X720 or X727 to stock 5.8.21s (with the bootloader already unlocked, TWRP installed and rooted)
I was asked by several people if I would be willing to share a link to my Stock X727 recovery, I created this thread to provide the 5.8.21s recovery for anyone who is experiencing dire issues or is simply wanting to restore the last official x727 recovery, as a daily driver or as a means to troubleshoot their issues by returning to the fully stock rom, stock partitions and ready to start over.
Attached is my full stock TWRP Recovery for my Le Eco Pro 3, version: 5.8.21s (X727)
It is a clean TWRP backup recovery that I did not mod in any way other than unlocking the bootloader.
The link is to my Google Drive account. https://drive.google.com/open?id=19dtLHmE5bsx5mdtEXOns4Z5drpeY79Em
The file is compressed
Ensure that you perform a full wipe before applying this recovery, and that you know what you are doing before attempting to install.
Please note that any changes that you make to your device is done at your own risk.
Please use caution and make sure that you have TWRP recovery installed.
Be in the habit of booting back to recovery before booting to system....This is a good practice for ensuring TWRP stays installed
You must unpack the downloaded 7zip file, before it will be useable.
As long as you can boot into TWRP and have root access you will have the full permissions needed to install anything , and reverse any actions that do not workout as planned.
Personally, I make a backup of my existing installation prior to making any changes. I recommend that you do the same. If you buy an OTG adapter and a USB 3.0 drive it takes 5 minutes.
The steps provided on the following link can be used to install my recovery file. https://forum.xda-developers.com/le-pro3/how-to/guide-return-to-stock-lock-bootloader-t3539513
When clicking the link, Google will attempt to scan. Click download to see the file, and then choose download if wanted.
Flash the appropriate files below for which ever device you own. ( X727 - Not needed, I provided the files anyway just in case.)
Firmware - X720
https://mega.nz/#F!kDgFQJ6R!MDhxCFw5KjfB0CfxAWwr9w
Firmware - X727
https://drive.google.com/open?id=136-4UpUUsj3exNsTc3d5n2iQuYUxr00H
Modems
X720: https://mega.nz/#F!pZ4WGARZ
Key : !2oG3Z2LS_wP8BzcWUQjfHg
X727: https://mega.nz/#F!NJ5VHS7Z
Key : !p0iO7bDiZ4kXny03EiAlWw
Build Prop Fix Device ID Tool ( Credit to @Ascertion )
https://mega.nz/#F!oAZ3yC4b
Key: !MDwbHXNTRdrpgMvQ42yviw
EFS:
Warning : Use this only if you have unrepairable IMEI Issues! Otherwise its not needed, and you could forever lose your original IMEI info.
https://drive.google.com/open?id=10n2VjwBYHmrq_PllcWmTaGUtMIeYynZ7
[B ]Just for Fun[/B] - Boot Screens and Boot Animations -
https://mega.nz/#F!JB51zbwR
Key: !sG_wXTPqyKpugg5QIZFo9w
These splash-screens and animations came from various sources. If you created them contact me so i can give you credit.
The Red Splash came from the Couco modified EUI : version 5.9.028s VR4
Other Helpful Hints and Tips More to Come!
Unlock Bootloader and Flash Roms, Gapps and Magisk https://forum.xda-developers.com/showpost.php?p=75009966&postcount=692 ( If using original Stock
Viper Settings : https://forum.xda-developers.com/showpost.php?p=75449097
Installing Viper and Dolby: https://forum.xda-developers.com/showpost.php?p=76362493&postcount=19
Edit
October 8, 2018:
I uploaded the Leeco Full Stock Rom 5.8.26s to my MegaDrive.
If you are selling your phone and want it to have stock without TWRP and without root , just flash this Rom and your stock radio driver "firmware" for your device
Link for EUI 21S : https://mega.nz/#!FRhh1ArL
Key: V5ua3oj91kFtgvLYBhl1X6Oq3bsScyDFruN3UptkWN0
A late reply to my issue but I just got around to restoring my Pro3. This worked while the last backup did not! Thanks!
Soul0Reaper said:
A late reply to my issue but I just got around to restoring my Pro3. This worked while the last backup did not! Thanks!
Click to expand...
Click to collapse
Thats Awesome! I am glad that it helped you.
Great work just what I needed only one problem for me after I flash rom reboot system and then go back into TWRP there seems to be encryption on it and I can't install or backup or do much. Is there a password or way around this TWRP encryption?
dunas2331 said:
Great work just what I needed only one problem for me after I flash rom reboot system and then go back into TWRP there seems to be encryption on it and I can't install or backup or do much. Is there a password or way around this TWRP encryption?
Click to expand...
Click to collapse
Sorry, I didn't get a notification for your message. The encryption is your storage.
Follow the instructions here to resolve: https://www.google.com/amp/s/forum....return-to-stock-lock-bootloader-t3539513/amp/
The link has instructions for getting past and removing encryption.
tsongming said:
Sorry, I didn't get a notification for your message. The encryption is your storage.
Follow the instructions here to resolve: https://www.google.com/amp/s/forum....return-to-stock-lock-bootloader-t3539513/amp/
The link has instructions for getting past and removing encryption.
Click to expand...
Click to collapse
Can you elaborate on what to do here I keep getting encryption password too and can't do anything in twrp
Hi tsongming, you know if can work on a x720?
thanks
Toni Moon said:
Hi tsongming, you know if can work on a x720?
thanks
Click to expand...
Click to collapse
Yes x720 and x727 are practically identical phones.
Sent from my LEX720 using XDA Labs
Scruffdog1978 said:
Can you elaborate on what to do here I keep getting encryption password too and can't do anything in twrp
Click to expand...
Click to collapse
I don't have time at the moment to provide lengthy instructions. With respect, I am providing a working, clean unlocked recovery file and pointing the way to instructions already that exist all throughout the LeEco forums.
But here's a quick answer
First use TWRP to reset your phone with a clean wipe, like you would for any ROM. Set developer options to the standard settings.
Next, your storage is encrypted. So it needs to be formatted. Use TWRP format the storage only. Then reboot to recovery.
****Important****
Don't ever format the storage without ensuring that you have a TWRP recovery. Always check the boxes to check if TWRP is installed before swiping. If you don't have a recovery you have a soft brick.
For you information, TWRP recovery is installed on it's on it very own partition. Formatting the storage does not affect the TWRP partition. Nonetheless, if you see the check box option, make sure they are checked.
I would suggest that you install the all in one tool : https://www.google.com/amp/s/forum....pment/tool-tool-one-mauronofrio-t3580611/amp/
This tool helps a lot and makes this stuff easier if are new to flashing custom Roms.. The all in one tool will update the Google driver and ADB installation on your computer.
After you format your drive you will have to flash the recovery from the PC. The links provided show all of the steps, or you can use the all for one tool. When your storage is encrypted you have no choice but to format.
If you use the all in one tool , see their page for instructions.
Read the instructions, then read them again. when learning something new it's a good idea to take notes.
Do not deviate from those steps or you could brick your phone.
There have been many people that have messaged me by PM who successfully returned to stock using my recovery, so it will work as long as you are careful and follow the instructions verbatim and you will be fine. Plus, It's a great idea to create your own working recovery before you begin.
Reminder, you are restoring to stock under you own discretion, I am not responsible if you miss a key step, have a power outage, use faulty cables or brick your device.
One final suggestion, when you install the recovery make sure your phone is fully charged. Unplug all unneeded external peripherals from your desktop computer.
Temporarily, disable antivirus, insert USB cable into the back of your desktop PC. Those outlets provide more power.
Please look past any typos, I typed this on little keys.
One last suggestion
Read this
http://www.androidtipsz.com/top-5-things-to-do-before-installing-a-custom-rom-on-your-android-device
Sent from my LEX720 using XDA Labs
Will I keep twrp after restore? Thanks
---------- Post added at 03:29 PM ---------- Previous post was at 02:53 PM ----------
meh4life321 said:
Will I keep twrp after restore? Thanks
Click to expand...
Click to collapse
Also, could I just restore the system?
Could I just flash this in TWRP and keep twrp as my recovery?
meh4life321 said:
Will I keep twrp after restore? Thanks
---------- Post added at 03:29 PM ---------- Previous post was at 02:53 PM ----------
Also, could I just restore the system?
Click to expand...
Click to collapse
No it will not keep twrp. follow the instructions in the link I provided above, there was no reason to duplicate the instructions on my post.
The difference is that my backup will restore your phone to Eui 5.8.21s with bootloader unlocked. You will need to reflash Twrp and root the phone with Magisk if you want to keep Twrp recovery ( that is what I would do) You will not be able to get OTA updates. But that doesn't matter because there probably not be any more OTA updates for the x727
Thank you, sir! This is great work. I was able to restore back to stock.
On the strange side of thing, my TWRP was saved. Previously, I was running AICP, but having multiple sound issues with it.
Here are the steps I followed to restore:
1) Move the file to OTG flash drive
2) Restore through TWRP via Restore
For my 727, it just reboot on logo, and doesn't go past it.
rob_z11 said:
For my 727, it just reboot on logo, and doesn't go past it.
Click to expand...
Click to collapse
It takes a while.
For me, I had the quickest experience by flashing Magisk afterwards. The stock Rom , Rooted, and with Xposed is actually pretty sweet.
tsongming said:
It takes a while.
For me, I had the quickest experience by flashing Magisk afterwards. The stock Rom , Rooted, and with Xposed is actually pretty sweet.
Click to expand...
Click to collapse
Will try again. How long is while? ?
rob_z11 said:
Will try again. How long is while?
Click to expand...
Click to collapse
It should not take more than 10 minutes, and will usually startup in 5. I just now restored one of my X727's with this recovery, using the OTG method that the last person used and viola in worked so there's no doubt. I have always used ADB until now.
However, unlike the other poster, I did lose Twrp and had to reinstall it.
Always, Always Ensure Twrp is permanently installed
Make sure that you are on the latest version of Twrp : https://twrp.me/leeco/leecolepro3.html
Run Magisk, install Rom, Install Magisk again
Personally, I use the latest version of Magisk : https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
You want a fully clean install before you flash.
Instructions are redundant of XDA: if you want something other than what you have read already: Click on my account history to find detailed instructions, ( I type too much, too often) Under most thanked, you can quickly find detailed instructions for installing , Roms, Rooting, Installing Twrp, How to wipe to avoid any issues.
Finally, if for some reason it still doesn't work, the file may have been corrupted.
Worst Case scenario : there are other recoveries available on XDA. Beware of the edited versions, they do not work as well as an unadulterated recovery.
tsongming said:
It should not take more than 10 minutes, and will usually startup in 5. I just now restored one of my X727's with this recovery, using the OTG method that the last person used and viola in worked so there's no doubt. I have always used ADB until now.
However, unlike the other poster, I did lose Twrp and had to reinstall it.
Always, Always Ensure Twrp is permanently installed
Make sure that you are on the latest version of Twrp : https://twrp.me/leeco/leecolepro3.html
Run Magisk, install Rom, Install Magisk again
Personally, I use the latest version of Magisk : https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
You want a fully clean install before you flash.
Instructions are redundant of XDA: if you want something other than what you have read already: Click on my account history to find detailed instructions, ( I type too much, too often) Under most thanked, you can quickly find detailed instructions for installing , Roms, Rooting, Installing Twrp, How to wipe to avoid any issues.
Finally, if for some reason it still doesn't work, the file may have been corrupted.
Worst Case scenario : there are other recoveries available on XDA. Beware of the edited versions, they do not work as well as an unadulterated recovery.
Click to expand...
Click to collapse
It actually worked for second time without any issues. Just can't get the root, but will follow your instructions.
Hi just wondering does this rom pass safetynet out of the box?
what is the date of the security patch of this rom?
thanks
blanktape said:
Hi just wondering does this rom pass safetynet out of the box?
what is the date of the security patch of this rom?
thanks
Click to expand...
Click to collapse
This recovery is stock EUI 5.8.21s. The exception is that the bootloader is unlocked, and it has TWRP Recovery instead of EUI Recovery. I do not remember which version of Magisk I Installed. I would advise that you flash the newest version of Magisk and you will not have any safety net issues.
If you are wanting a complete return to stock, you should instead reflash the stock Full Rom, which will reinstall EUI recovery and lockdown the bootloader.
Last updated May 2020
Keeping it short. This is a simple way to root your device. You will need a computer and a data cable for this.
Objectives :
Have root using Magisk
Be able to install OTA from the settings without bootloops
Avoid boot loop
Very important :
This will work with ANY Xiaomi phone, and should work with ANY ANDROID phone as well. The difference between phones would be in where you can get your boot image from.
Your phone has to have an unlocked bootloader
Your phone has to have stock recovery. TWRP WILL cause bootloop for root and/or OTA updates from system.
I like to have root with magisk and don't want to install TWRP because I want to be able to install OTA from system without boot loops. This guide will help you achieve this with ease.
Steps:
Download the ROM full zip file. This could be the ROM ALREADY installed on your phone or you are updating your phone to it. Here is a video of one way to get your ROM file.
https://youtu.be/KsxHial1v1U
Open the file and extract "boot.img" on your phone or Computer.
Move the boot.img file to your phone
Download and install the latest Magisk official manager app from here: https://github.com/topjohnwu/Magisk/releases/download/manager-v7.4.0/MagiskManager-v7.4.0.apk
Open Magisk manager and click install then "select and patch a file" like in this video
https://youtu.be/USHcCMYlexM
Copy the Patched image from the download folder to your computer adb/fastboot folder
Reboot your phone into fastboot (press and hold power and vol down) and connect it to the computer
Flash that patches image file using fastboot
fastboot flash boot magisk_patched.img
Click to expand...
Click to collapse
fastboot reboot
Click to expand...
Click to collapse
Open Magisk manager and complete the installation if needed. The app will prompt you for action.
Enjoy
Update May 2020
Hello again,
Sorry for being away for so long. Here are some of the things I have noticed people are confused with and need to make them clear:
This method works for ANY Android phone. As long as you have the Correct boot.img and can unlock the bootloader
MAKE SURE 100% you have the correct boot.img file for your CURRENT ROM
MAKE 100% SURE, the boot.img file you get from the FULL ROM zip file, not an OTA update zip file
Make sure you check the date and time of the "magisk_patched.img" file to make sure that is the one you made
Make sure you use the LATEST magisk manager
Make sure you open magisk after flashing the magisk_patched.img as boot image. Magisk manager will tell you if there is another step needed, just click yes and it will be done in seconds
Make sure to enable "Hide Magisk" to allow you to have your BANK apps working as well as security checks
If any app you use gives you an error "YOU ARE Rooted bla bla bla" Use magisk manager to hide the root for this specific app (in the settings)
That's all I can remember, good luck
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Kiwironic said:
Keeping it short. This is a simple way to root your device. You will need a computer and a data cable for this.
Steps:
Download the ROM full zip file. This could be the ROM ALREADY installed on your phone or you are updating your phone to it. Here is a video of one way to get your ROM file.
Open the file and extract "boot.img" on your phone or Computer.
Move the boot.img file to your phone
Download and install the latest Magisk official manager app from here: https://github.com/topjohnwu/Magisk/releases/download/manager-v7.4.0/MagiskManager-v7.4.0.apk
Open Magisk manager and click install then "select and patch a file" like in this video
Copy the Patched image from the download folder to your computer adb/fastboot folder
Reboot your phone into fastboot (press and hold power and vol down) and connect it to the computer
Flash that patches image file using fastboot
Open Magisk manager and complete the installation if needed. The app will prompt you for action.
Enjoy
Click to expand...
Click to collapse
After fastboot flash, reboot, open magisk manager, tap INSTALL beside "magisk is up to date". Then select direct install; reboot.
Works on MIUI 11.0.2; davinciin. ??
I know that when I unlock the bootloader,the phone is going to reset...but,is it going to happen immediately or after that 168 hours of waiting?
Sent from my Xiaomi Mi 9T using XDA Labs
welder73 said:
I know that when I unlock the bootloader,the phone is going to reset...but,is it going to happen immediately or after that 168 hours of waiting?
Sent from my Xiaomi Mi 9T using XDA Labs
Click to expand...
Click to collapse
People report different amounts of wait time, depends on the mi account I think
welder73 said:
I know that when I unlock the bootloader,the phone is going to reset...but,is it going to happen immediately or after that 168 hours of waiting?
Sent from my Xiaomi Mi 9T using XDA Labs
Click to expand...
Click to collapse
Phone is reset when the bootloader is unlocked, not before/during the waiting time.
Can do with locked bootloader?
Micdu70 said:
Phone is reset when the bootloader is unlocked, not before/during the waiting time.
Click to expand...
Click to collapse
Thank you man :good:
Sent from my Xiaomi Mi 9T using XDA Labs
Cabeção-Flu said:
Can do with locked bootloader?
Click to expand...
Click to collapse
No, bootloader has to be unlocked.
@Kiwironic followed your guide and worked very well, although I had to wipe data through the stock recovery to get the phone to boot, I believe that's just how newer Xiaomi phones work. I do have one question though, now that I'm rooted with stock recovery, would I be able to install OTA updates? I'm assuming I would of course lose root and have to redo the process from scratch if that's the case.
Lazer Bear said:
@Kiwironic followed your guide and worked very well, although I had to wipe data through the stock recovery to get the phone to boot, I believe that's just how newer Xiaomi phones work. I do have one question though, now that I'm rooted with stock recovery, would I be able to install OTA updates? I'm assuming I would of course lose root and have to redo the process from scratch if that's the case.
Click to expand...
Click to collapse
I had root on MIUI10 and updated the ROM to MIUI11 then did my root again the way mentioned and did NOT have to wipe. You can get OTA anyway, it will try the update first, it will fail, then it download and install a full ROM zip automatically. You have to wait for it to do that twice, that's all. The first boot after the update takes some time.
@Kiwironic First, thank you so your simple guide!
Can this cause bootloop on my device? If yes, can I simply flash the original boot.img to boot without any data loss?
Also another question: my device is rootless and bootloader unlocked, so my Google Pay doesn't work. When installing Magisk it goes back to work immediately or I have to do something to work?
kryzeK said:
@Kiwironic First, thank you so your simple guide!
Can this cause bootloop on my device? If yes, can I simply flash the original boot.img to boot without any data loss?
Also another question: my device is rootless and bootloader unlocked, so my Google Pay doesn't work. When installing Magisk it goes back to work immediately or I have to do something to work?
Click to expand...
Click to collapse
If you flash the full rom, chances of bootloop is minimal. And should have stock experience except for being unlocked.
I got bootloop, using indian global V11.0.2.0.
After flashing patched boot, it gets bootloop recovery, only way is to wipe all data and reboot
After booting up and opeing magisk it shows a recommendation to install some ZIP
Accepting the recommendation results in bootloop,
Rejecting the recommendation and trying to Install > Direct Install results in bootloop as well
Posted a thread with this issue here
stone_henge said:
I got bootloop, using indian global V11.0.2.0.
After flashing patched boot, it gets bootloop recovery, only way is to wipe all data and reboot
After booting up and opeing magisk it shows a recommendation to install some ZIP
Accepting the recommendation results in bootloop,
Rejecting the recommendation and trying to Install > Direct Install results in bootloop as well
Posted a thread with this issue here
Click to expand...
Click to collapse
This
I got the exact same issue, every time it asked me to install additional zip files it went into recovery immediately after booting up.
Anyone know why this happened?
oblyvision said:
This
I got the exact same issue, every time it asked me to install additional zip files it went into recovery immediately after booting up.
Anyone know why this happened?
Click to expand...
Click to collapse
Do you have stock recovery or TWRP? Which version of Magisk are you using?
I have patched my boot stock image, installed full ROM, then flashed the patched boot image. Magisk did not show any recommendation installation.
There are a few guides online on how to deal with Magisk Bootloop without the need to wipe data.
Kiwironic said:
Do you have stock recovery or TWRP? Which version of Magisk are you using?
I have patched my boot stock image, installed full ROM, then flashed the patched boot image. Magisk did not show any recommendation installation.
There are a few guides online on how to deal with Magisk Bootloop without the need to wipe data.
Click to expand...
Click to collapse
TWRP 3.3.1-8, magisk 20.1
Patching boot image with magisk wasn't a problem. The Superuser itself works normally, module doesn't. The magisk manager suggested to download additional files for the magisk to be working properly.
I'm on MIUI 11.0.1 Global
Was TWRP the cause in the fist place?
oblyvision said:
TWRP 3.3.1-8, magisk 20.1
Patching boot image with magisk wasn't a problem. The Superuser itself works normally, module doesn't. The magisk manager suggested to download additional files for the magisk to be working properly.
I'm on MIUI 11.0.1 Global
Was TWRP the cause in the fist place?
Click to expand...
Click to collapse
On first installation MM asks to download what it needs e.g. to verify SafetyNet. Allow and there is no problem about. TWRP is generally not needed to install Magisk. Things are documented in Magisk guides
https://topjohnwu.github.io/Magisk/
https://www.didgeridoohan.com/magisk/HomePage
oblyvision said:
TWRP 3.3.1-8, magisk 20.1
Patching boot image with magisk wasn't a problem. The Superuser itself works normally, module doesn't. The magisk manager suggested to download additional files for the magisk to be working properly.
I'm on MIUI 11.0.1 Global
Was TWRP the cause in the fist place?
Click to expand...
Click to collapse
Yes, as the title suggests "without TWRP". The reason is, you cannot install OTA and magisk easily without using the stock recovery. Any attempt to update OTA or use any recovery script on the phone will result in a boot loop.
The solution to get out of the boot loop is simple. Actually a couple of solutions.
One, flash your stock recovery, or
Two, flash a full ROM that includes the stock recovery.
No need to wipe data
That's the only reason I made this post and the other about OTA on root. I don't like to use TWRP because I want OTA install without boot loop. At the same time I want root. Hence the solutions I provided
Kiwironic said:
Yes, as the title suggests "without TWRP". The reason is, you cannot install OTA and magisk easily without using the stock recovery. Any attempt to update OTA or use any recovery script on the phone will result in a boot loop.
The solution to get out of the boot loop is simple. Actually a couple of solutions.
One, flash your stock recovery, or
Two, flash a full ROM that includes the stock recovery.
No need to wipe data
That's the only reason I made this post and the other about OTA on root. I don't like to use TWRP because I want OTA install without boot loop. At the same time I want root. Hence the solutions I provided
Click to expand...
Click to collapse
I've tried flashing magisk via recovery and didn't work, the same bootloop. Here's the thread: https://forum.xda-developers.com/mi-9t/how-to/guide-miui-11-v11-0-1-0-pfjmixm-rooted-t3997299
I thought this might be a working alternative.
Gotta try installing magisk with stock recovery then, and if it still didn't work, well, more research for me..
oblyvision said:
I've tried flashing magisk via recovery and didn't work, the same bootloop. Here's the thread: https://forum.xda-developers.com/mi-9t/how-to/guide-miui-11-v11-0-1-0-pfjmixm-rooted-t3997299
I thought this might be a working alternative.
Gotta try installing magisk with stock recovery then, and if it still didn't work, well, more research for me..
Click to expand...
Click to collapse
You have to understand the requirements :
- stock recovery
- install magisk manager app
- patch the boot image for your stock ROM (same version on your phone)
- flash that Patched boot image.
- reboot
- done, that's magisk installed
I unlocked the device bootloader thanks to Narender, and tried to flash Lineage OS 18.1. After flashing the ROM and vendor zip files, I switched the current slot and restarted to fastboot mode. Then I flashed the vbmeta image. Then I rebooted to recovery to check the current slot. Slot was as expected, so I rebooted the system.
Then, TWRP gave me an alert saying "No OS is installed" before rebooting. I was unsure what was the reason for it because the ROM was just installed, so I rebooted the system.
After that, device went straight into fastboot mode after "Android One" screen. No matter which option I choose from there, it keeps restarting the bootloader. I tried using "fastboot reboot recovery" but that did not work either. Then I tried to change the active slot of the device using fastboot commands. That did not help either.
Now I'm stuck with a Nokia 7.2 that can only be turned off or start in fastboot mode. Is it bricked beyond saving? I just want to install TWRP in any of the slots and install any usable ROM. Any help is deeply appreciated.
Installed NFT and flashed the stock ROM using that. All good now. I still need to figure out how to install ROMs on A/B systems using TWRP.
Chevindu said:
Installed NFT and flashed the stock ROM using that. All good now. I still need to figure out how to install ROMs on A/B systems using TWRP.
Click to expand...
Click to collapse
Follow this and DM if you have doubts
Edit: https://forum.xda-developers.com/t/...-magisk-on-custom-roms-for-nokia-7-2.4301145/
Ujwal2000 said:
Follow this and DM if you have doubts
Click to expand...
Click to collapse
I actually installed few ROMs after my previous reply. But none of them had working WiFi, which is a deal breaker. Went back to stock ROM.
If you are interested I could help you
Ujwal2000 said:
If you are interested I could help you
Click to expand...
Click to collapse
Hey, thanks. But I thought it's not possible due how the signatures in security patches work. So I gave up. Maybe I misunderstood. Linking to Raghu's reply below.
Post in thread '[OFFICIAL] TWRP 3.4.0-0 | Team Win Recovery Project | Nokia 7.2 | Daredevil |'
No, wi-fi with twrp still doesn't work. But what I did was, I extracted the boot image of the ROM I was using, flashed twrp, flashed gapps and then flashed the boot file I extracted earlier. So, wi-fi does work in the end. But, you can't have twrp perpetually installed
Some tutorials I saw online used fastboot boot twrp.img
What this is supposed to do is boot into twrp temporarily and is gone after restart.
But, on this phone, instead of booting to recovery after the command, it boots to the OS. And when you restart the boot image is gone and you restart into the stock recovery. So, that method doesn't work
Ujwal2000 said:
No, wi-fi with twrp still doesn't work. But what I did was, I extracted the boot image of the ROM I was using, flashed twrp, flashed gapps and then flashed the boot file I extracted earlier. So, wi-fi does work in the end. But, you can't have twrp perpetually installed
Some tutorials I saw online used fastboot boot twrp.img
What this is supposed to do is boot into twrp temporarily and is gone after restart.
But, on this phone, instead of booting to recovery after the command, it boots to the OS. And when you restart the boot image is gone and you restart into the stock recovery. So, that method doesn't work
Click to expand...
Click to collapse
Yup, pretty much what I experienced too.
I haven't tried extracting boot image and flashing it manually. At this point to be honest, I'm reluctant to put my hands on it again without having a clear step-by-step guide about it.
I did write a step by step guide. But i'll leave it to you to decide if it is clear. Ok I realize I haven't linked the post.
Here it is: https://forum.xda-developers.com/t/...-magisk-on-custom-roms-for-nokia-7-2.4301145/
Ujwal2000 said:
I did write a step by step guide. But i'll leave it to you to decide if it is clear. Ok I relaise I haven't linked the post.
Here it is: https://forum.xda-developers.com/t/...-magisk-on-custom-roms-for-nokia-7-2.4301145/
Click to expand...
Click to collapse
Thanks Ujwal, appreciate it. I'll have a look.