Huawei honor 8x max root/rebrand help - Honor 8X Questions & Answers

I need a complete genius help please...
I have this fairly new ARE-AL00(C00) Honor 8x Max, switched from an iPhone X, very new to this jailbreaking an android type of thing, but basically I have a chinese left swipe board called HiBoard and chinese launcher called huawei home and all that good stuff with the china build (C00) I am guessing. I heard if I switch my phone to a (C432) EU version, It would come with the google on the left side and all that google stuff which is what I want. I tried to go to funkyhuawei but I see maybe my phone isnt available yet and firmware. So then I decided maybe I could root my phone and change model number to something different so I can get other models and firmware correct to rebrand? Or will that not work? I have tried nova launcher and the companion but it goes away after some time even with the huawei home launcher disabled. So I am guessing rebranding would make the google stuff totally work correctly, but I am having so much trouble! tried to flash twrp but says unknown partition and getvar variable is not available.. I am running EMUI 8.2.0 Android Version 8.1.0 Build Number ARE-AL00 8.2.0.128(C00) Just need a real guide step by step or something please would be a miracle... loosing my mind trying to figure this out..

blueeyeskeenan said:
I need a complete genius help please...
I have this fairly new ARE-AL00(C00) Honor 8x Max, switched from an iPhone X, very new to this jailbreaking an android type of thing, but basically I have a chinese left swipe board called HiBoard and chinese launcher called huawei home and all that good stuff with the china build (C00) I am guessing. I heard if I switch my phone to a (C432) EU version, It would come with the google on the left side and all that google stuff which is what I want. I tried to go to funkyhuawei but I see maybe my phone isnt available yet and firmware. So then I decided maybe I could root my phone and change model number to something different so I can get other models and firmware correct to rebrand? Or will that not work? I have tried nova launcher and the companion but it goes away after some time even with the huawei home launcher disabled. So I am guessing rebranding would make the google stuff totally work correctly, but I am having so much trouble! tried to flash twrp but says unknown partition and getvar variable is not available.. I am running EMUI 8.2.0 Android Version 8.1.0 Build Number ARE-AL00 8.2.0.128(C00) Just need a real guide step by step or something please would be a miracle... loosing my mind trying to figure this out..
Click to expand...
Click to collapse
Jailbreaking and rooting can be a but confusing but are similar in many terms like both allow you to modify system .
About the rooting part....... Huawei just messed up things a while ago. You cannot get the bootloader unlock code which is needed to unlock bootloader to modify the system or any other partitions. Which means no root.
And how can you flash TWRP when you can't unlock the bootloader at the first place? And that might be what failed the TWRP installation

I also have that version but I don't have PC a guy over at twrpbuilder is offering to help build one for us but I can't extract none of the files because I don't have a PC in order to run Huawei update extractor I have the firmware file do you have a PC so you can extract the files and send them to him??
Sent from my Ascend Mate 2 using Tapatalk

I had it unlocked before but reset the phone which maybe after Huawei did that the oem unlock didn't show anymore, but I bought an unlock code and everything worked up until it was giving me the error codes. But I just ran Pixel launcher and got Google running in background all the time in app launch settings in battery like how it really should be using Google data anyway. Used ADB SHELL and app inspector to see files and hide/delete them, whatever the ADB she'll actually does. All is good. No root/boot unlock needed

I'm trying to get a twrp built for it but I don't have pc to get needed files
Sent from my ARE-AL00 using Tapatalk

Fredin_ said:
Jailbreaking and rooting can be a but confusing but are similar in many terms like both allow you to modify system .
About the rooting part....... Huawei just messed up things a while ago. You cannot get the bootloader unlock code which is needed to unlock bootloader to modify the system or any other partitions. Which means no root.
And how can you flash TWRP when you can't unlock the bootloader at the first place? And that might be what failed the TWRP installation
Click to expand...
Click to collapse
У меня тоже honor 8X Max с разблокированным загрузчиком. При попытке прошить TWRP тоже пишет что нет такого раздела. Команда fastboot flash recovery ....img неправильная команда. Думаю, что команда должна быть, как на всех новых honor такая fastboot flash recovey_ramdisk ....img где .... имя прошиваемого файла.
Однако я рисковать не стал, так-как на случай неудачи нет оригинального образа recovery.

Злыдень said:
У меня тоже honor 8X Max с разблокированным загрузчиком. При попытке прошить TWRP тоже пишет что нет такого раздела. Команда fastboot flash recovery ....img неправильная команда. Думаю, что команда должна быть, как на всех новых honor такая fastboot flash recovey_ramdisk ....img где .... имя прошиваемого файла.
Однако я рисковать не стал, так-как на случай неудачи нет оригинального образа recovery.
Click to expand...
Click to collapse
Umm I'm not familiar with this language but I think it's Russian , or so says Google.
Well I don't think you should risk it until someone actually confirms its working

Fredin_ said:
Umm I'm not familiar with this language but I think it's Russian , or so says Google.
Well I don't think you should risk it until someone actually confirms its working
Click to expand...
Click to collapse
That's right. My language is Russian. The team for sewing the image of the recoveries will most likely be exactly the one I wrote above. It would be safe to risk and select the appropriate TWRP if there was an original recovery image. All the firmware that was able to get in the open spaces of the Internet do not have the BOOT and recovery sections.

did someone find a working twrp recovery for honor 8x max?

How do just check if the bootloader is locked or not in the phone Honor 8X Max?

jamesbond22 said:
How do just check if the bootloader is locked or not in the phone Honor 8X Max?
Click to expand...
Click to collapse
Boot to fastboot and see the phone status there Locked/unlocked
or boot to fastboot and run this command if you know about the ADB shell/commands
fastboot oem get-bootinfo
It will show the status on pc.

shashank1320 said:
or boot to fastboot and run this command if you know about the ADB shell/commands
fastboot oem get-bootinfo
It will show the status on pc.
Click to expand...
Click to collapse
A good start.... At least I know I have bootloader locked.

blueeyeskeenan said:
...got Google running in background all the time in app launch settings in battery like how it really should be using Google data anyway. Used ADB SHELL and app inspector to see files and hide/delete them, whatever the ADB she'll actually does. All is good. No root/boot unlock needed
Click to expand...
Click to collapse
@blueeyeskeenan: if you get a few minutes, would you mind writing up the steps you followed to get the google services / play store etc installed (and exactly where you sourced the apk files)? I've tried a couple that seem to work for others but not for me. So I'd appreciate anything you can tell me.
Cheers!
---------- Post added at 10:12 AM ---------- Previous post was at 09:45 AM ----------
Злыдень said:
...select the appropriate TWRP if there was an original recovery image.
Click to expand...
Click to collapse
There is a twrp listed here: https://twrp.me/huawei/huaweihonor8.html that is labeled as being for Honor 8X. However, it does not say if it will also work for the 8X Max. Am I right in thinking that the chip set is different in the 8X and the Max?
Also, I would have expected available roms to be listed here but none are shown as yet: https://www.getdroidtips.com/huawei-honor-8x-max-stock-firmware/ .
I will be watching closely for this myself as I want to shed this Chinese ROM asap

To unlock the bootloader, I need to know only a long string of digits?

jamesbond22 said:
How do just check if the bootloader is locked or not in the phone Honor 8X Max?
Click to expand...
Click to collapse
It is locked by default. If you yourself didn't unlock it it's going to be locked

jamesbond22 said:
To unlock the bootloader, I need to know only a long string of digits?
Click to expand...
Click to collapse
Digits and letters, and it's unique for every single device

Злыдень said:
У меня тоже honor 8X Max с разблокированным загрузчиком. При попытке прошить TWRP тоже пишет что нет такого раздела. Команда fastboot flash recovery ....img неправильная команда. Думаю, что команда должна быть, как на всех новых honor такая fastboot flash recovey_ramdisk ....img где .... имя прошиваемого файла.
Однако я рисковать не стал, так-как на случай неудачи нет оригинального образа recovery.
Click to expand...
Click to collapse
The reason the partition is called ramdisk not recovery. Code fastboot flash ramdisk recovery.img

***After unlocking the bootloader, installing TWRP***
I have tried to install several Android GSIs and found the backlight was stuck at 50%, even though the slider is at 100%. Also, there are issues with Google and browser freezings, chrome, edge, etc. The only rom that seemed to work is the Quack V222 (Boo Android 10) from Phhersson, backlight works, non google apps work. Still, Google play services won't install properly. Any thoughts? Previous stock rom EMUI 9.1. (Magisk hangs and will not load)

avmad said:
@blueeyeskeenan: if you get a few minutes, would you mind writing up the steps you followed to get the google services / play store etc installed (and exactly where you sourced the apk files)? I've tried a couple that seem to work for others but not for me. So I'd appreciate anything you can tell me.
Cheers!
---------- Post added at 10:12 AM ---------- Previous post was at 09:45 AM ----------
There is a twrp listed here: https://twrp.me/huawei/huaweihonor8.html that is labeled as being for Honor 8X. However, it does not say if it will also work for the 8X Max. Am I right in thinking that the chip set is different in the 8X and the Max?
Also, I would have expected available roms to be listed here but none are shown as yet: https://www.getdroidtips.com/huawei-honor-8x-max-stock-firmware/ .
I will be watching closely for this myself as I want to shed this Chinese ROM asap
Click to expand...
Click to collapse
Just curious have you tried the TWRP?

GSI has brightness backlight issues any ideas?
Phherson quack rom works (android 10) looking for Android 12L backlight fix.

Related

Lenovo TAB S8-50 - Stock Firmware ROM/Root and Support

Lenovo TAB S8-50 - Stock Firmware ROM/Root/emp CWM Session, and Support
Hi All,
I have hard time to figure out since there's no dedicated thread for this tablet. I know you can find couple of posts related to this tablet here in XDA, but again I like all the info for this tablet in one page
My idea here is put all together here in XDA forum, can't promise you that this will be ultimate guide for this tablet, but at least this may help you get started.
By the way; there are 3 models of the TAB S8-50:
Lenovo TAB S8-50F (WiFi)
Lenovo TAB S8-50L (WiFi+ Data)
Lenovo TAB S8-50LC (WiFi+LTE (Voice)
Click to expand...
Click to collapse
Lenovo Official Stock Firmwares
Lenovo Official Stock Full ROM (TABS8-50F_140929)
KitKat (Official or Users provided Firmwares)
TABS8-50F_USER_S000143_1409291652_WW14_BMAIN_ROW_US
This is official full stock ROM that comes with device when you first open it (then gets several update patches after that).
Download it and unzip it, you should see doc "how_to_download.docx", follow the instruction to flash firmware above. There's also Lenovo_TAB_S850_V1.0.1.msi for Windows drivers in case you needed.
Update (official patch): Lenovo Official Stock ROM (S000143_140929_ROW_TO_SS000200_150121_ROW) - a big thanks to @KainXSS for getting this for us!
Important: this is update zip that Lenovo pushed the device, it is NOT full ROM. It will most likely break the root, so use the root method here again to re-root once you got updated.
S8-50F_S000143_140929_ROW_TO_S8-50F_S000200_150121_ROW
Update (offical patch): Lenovo Official Stock ROM (S000164_141103_ROW_TO_S000185_141203_ROW)
Important: this is update zip that Lenovo pushed the device, it is NOT full ROM. It will most likely break the root, so use the root method here again to re-root once you got updated.
S8-50F_S000164_141103_ROW_TO_S8-50F_S000185_141203_ROW_WC5F.zip
Lenovo Offical Stock ROM ( TABS8-50LC_141010) - a big thank to @tigr72 for providing this firmware
tabs8-50lc_s139_141010_ww14_bmain_row_us.rar
Lollipop (Official or Users provided Firmwares) - Update 11/23/2015
A big thank to both; @mac231us and @Shump for providing following information below -
If you have questions, you may ask @mac231us, @Shump, @balika011, and @Minto107, I am sure they will be happy to help you out whenever they can, but be nice to them!
Lollipop TWRP backup S8-50F_S000456_151016_ROW
S8-50F http://forum.xda-developers.com/showpost.php?p=63598258&postcount=947
@bailka011 Unlock Tool
https://balika011.me/dl/S8unlocker.zip
@Shump 's excellent explanation of how balika011 unlock tool works: http://forum.xda-developers.com/showpost.php?p=63716397&postcount=1085
Updated flash tool;
https://01.org/android-ia/downloads/intel-phone-flash-tool-lite
S8-50LC firmware version 151016 S000456 - thanks to @Minto107 for providing download link. If download link does not works, please ping @Minto107
http://tab-dl.ota.lenovomm.com/dls/v6/S8-50LC_S000456_151016_ROW_WCC5.zip
Click to expand...
Click to collapse
Root Methods
Root (method 1): - - a big thank (спасибо) to Xakep @tigr72 at Lenovo-forums.ru
Root_S8-50LC_tab
This is for S8-50LC, but it works for S8-50F too. Download it your PC (windows only) and hook up your tablet to your PC, and double click on Root_S8-50LC_tab.exe, it should flash SuperSu and root your device.
it is important that your device can be recognized by ADB command in order to root tool work (test your adb connection: adb devices, make sure it connects to your device)
Check @Hash.H's post here for detail instruction; Official "How To" root Lenovo Tab S8-50
Root (method 2):
Check @bogdann8's post here - this method may come handy if you get new firmware upgrade and above method no longer works, then this may be another way to root;
Lenovo S850 (ROW) Rooting (manual process)
Click to expand...
Click to collapse
Installing Temp CWM Session
Custom Recovery installing Temp CWM Session (method 1): --> don't use this, use method 2 CWM below
Based on this Russian forum, this works for all variant of Lenovo S8-50L, S8-50F, etc. In fact, I tested and yes it does work.
CWM Recovery for Lenovo S8-50F
Instruction to install CWM:
Make sure that your computer is not connected to other Android phones
Make sure that you have installed the ADB driver for S8-50 tablet
Make sure that the tablet is turned on USB debugging
Connect the device to your computer via USB
Download IntelAndroid-FBRL_LF_Edition.7z file, unzip it on your PC's desktop, and run the program called launcher.bat
If all the conditions and requirements are met, once finalized, the program automatically closes, the tablet will automatically restart and boot into CWM Recovery, from there you can perform full-nandroid backup or any other stuff.
p.s: you need to repeat above steps each time you want to use CWM
Custom Recovery installing Temp CWM Session (method 2):--> Use this CWM from @social-design-concepts
If method 1 does not works for you, try @social-design-concepts Temp CWM session. See his thread for more info and instruction. I have tested this, it works. It seems like you can also restore your CWM nandroid backup with this, see @Lander00 post.
Temp CWM Session by @social-design-concepts
For Linux stuff - Tethered CWM and Phone Flash Tool:
Please @Maheshwara 's post here:
http://forum.xda-developers.com/showpost.php?p=60559734&postcount=273
I also like to thank both @kandalph and @Maheshwara, sharing their finding and helping this community.
Click to expand...
Click to collapse
How to flash stock firmware
How to flash stock firmware using How to flash stock firmware tool:
Follow this instruction if you like to flash full stock firmware to your device, please also http://lenovo-forums.ru for some additional info if you like.
See post #90
Click to expand...
Click to collapse
Additional Info
Additional Info:
Lenovo S8-50 tablet (Russian user forum)
Use Google translate to translate - to download stuff from this forum, you need to register the forum.
[Q] Lenovo S8 (S8-50) Tablet - Possible Support?
Some useful discussing thread, go review it, there's some additional info there as well.
Click to expand...
Click to collapse
P.s: The last firmware upgrade (build 141203) that Lenovo pushed changes tablet's default DPI 240 to 320. If you happened to get upgrade before root, re-root it and then modify build.prop's to ro.sf.lcd_density=240. The 240 is tablet native default DPI. There's no word when Lenovo officially fix this, see official lenovo user forum below:
http://forums.lenovo.com/t5/Other-Android-based-Tablets/Re-Tab-s8-50-Latest-update-changes-resolution/td-p/1825209
Update: ‎01-28-2015 11:06 AM
Here's one of the stupidest respond from Lenovo Tech Support about their screwed up DPI - this simply tells you that they will keep 320 DPI for any new upcoming updates. Now, why they do this!?, we don't know nor they are giving any technical explanation, but we all know that original native DPI of this tablet is 240.
Solution! Re: Tab s8-50 - Latest update changes resolution?
Options
‎01-28-2015 11:06 AM
At this time, the design for the S8-50 tablet image will be maintained at a DPI of 320.
As noted in this discussion, there are several work-arounds available for customers who prefer a lower setting.
Thank you to everyone who contributed to identifying the issue and the work-arounds.
Amy Tupper
Technical Resolution Lead, Pervasive Issues
Lenovo US
Click to expand...
Click to collapse
Increasing Headset Volume
Increasing Headset Volume
A few of you complain about how low the headset volume, to increase it a bit, see the instruction here in this post;
Increasing Headset Volume Mode by me
Click to expand...
Click to collapse
Additional Lenovo Apps
Additional Lenovo Apps
Here's some newest Lenovo apps (beta) that is not included in official firmwares. Some apps are updated, most likely included as final version upcoming firmware (depends on which region you are on).
you already may have these apps, before installing, make sure you take a backup so that you can revert it back to original.
Lenovo_Apps_Beta.zip
More updated apps will be posted here...
Click to expand...
Click to collapse
Using Xposed Framework
XPOSED:
Warning!!:
Please note official @rovo89 's Xposed should support Intel x86 devices now. You may use that. Below is just some workaround from Asus thread x86 in case orginal Xposed thought some may find it useful.
Do not try this if you don't know what you are doing or if you don't have full nandroid backup. This is related to Xposed apps for some x86 devices that causes soft-reboot and
following is a work-around solution from ASUS thread (since it has x86 intel CPU). As I am not heavily using xposed apps, I have not tried this method.
*** Install Xposed: Root is a MUST. USB debug turned on. Windows only and Driver for Intel and ASUS must be ready on PC.
Step1: download xposed apk and install the apk. DO NOT RUN APP AND DO NOT INSTALL FRAMEWORK.
Step2: Run command promt (Run / cmd). assume adb folder is on C:\ drive and you are now in C:\ADB
Step3: Type following (or copy and paste)
adb devices (make sure your phone show!)
adb shell (hit Enter)
su (hit Enter, then look on your phone and touch OK)
echo 148 > /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset (hit Enter)
chmod 664 /data/data/de.robv.android.xposed.installer/conf/jit_reset_offset (hit Enter)
Step4: Now go to app drawer and run Xposed which you installed earlier. Touch "Framework" and touch "Install/Update"
DONE. Now install addons.​http://forum.xda-developers.com/android/help/asus-zenfone-5-zenfone-6-to-t2839984
Click to expand...
Click to collapse
Help/Support/Troubleshoot
Help/Support/Troubleshoot:
Remember and always keep in mind; just because I posted this thread out here does NOT mean I am your tech-support. This post provided as it is information only.
However, you can still post your questions/issues here, and maybe I can or someone else can help you out, this is user driven community, so it is all about sharing and passing the knowledge to each others.
If find some additional info, tricks, full official firmwares that's not posted here, lenovo apps, etc., please do let me know so I can post them here, so others can benefit as well.
Click to expand...
Click to collapse
If you find this thread helpful, please click THANKS button
.
.
Amazing Post
Thanks for this post.... its all everyone could ask for.
Happy new year.
Thank.
Here are - Lenovo Offical Stock ROM (TABS8-50LC_141010)
tigr72 said:
Thank.
Here are - Lenovo Offical Stock ROM (TABS8-50LC_141010)
Click to expand...
Click to collapse
thank you! you are great...:good:
jazzespresso said:
Hi All,
Custom Recovery:
Based on this Russian forum, this works for all variant of Lenovo S8-50L, S8-50F, etc. In fact, I tested and yes it does work.
:good:
Click to expand...
Click to collapse
CWM does not working, I did reflash few times and do not help for it.
mikib1 said:
I did reflash few times and do not help for it.
Click to expand...
Click to collapse
This Recovery does not flash, but only runs from PC...
mikib1 said:
CWM does not working, I did reflash few times and do not help for it.
Click to expand...
Click to collapse
I just added detail instruction...see OP post..
jazzespresso said:
I just added detail instruction...see OP post..
Click to expand...
Click to collapse
Sorry I don't understand... what is "...OP post..." my English isn't so good...
As I understand from post of tigr72, this recovery runs ONLY from PC and each time i need to use it i have run it from PC...?
I am not a programer, but this is not my first android device (daily I'm using Motorola Atrix 4G, rooted and with Cyanogenmod 7), so I was confused when i saw information that CWM have to run each time from PC... I was thinking that i do not understand correct what tigr 72 mean.
Or I am wrong now.... and jazzespresso explained how to flash once and correct but I am doing something wrong...
PS. Of course I read the instructions of jazzespresso
Generally thank you for All of your help and work in the forum...
mikib1 said:
As I understand from post of tigr72, this recovery runs ONLY from PC and each time i need to use it i have run it from PC...?
Click to expand...
Click to collapse
That's right.
Just bootloader locked, and not allows to change recovery...
tigr72 said:
That's right.
Just bootloader locked, and not allows to change recovery...
Click to expand...
Click to collapse
Thank you, I was not sure, but suspected it... no one writing about unlock bootloader.
mikib1 said:
Thank you, I was not sure, but suspected it... no one writing about unlock bootloader.
Click to expand...
Click to collapse
yeah..that's the only thing with this one....of course, I would love to have stock recovery to replaced with this one, so that i don't need to use PC each time when I need to do full-nandroid backup...but hey this is still great progress...i should keep on eye on Xakep at Lenovo-forums, if someone can make it, he is the only one get this we should convice him to participate in this forum
thank you!
Thanks for this thread!
jazzespresso said:
we should convice him to participate in this forum
Click to expand...
Click to collapse
Не имеет смысла. По двум причинам.
1. Если даже я найду решение проблемы, то это будет гарантировано только для S8-50LC.
2. Любую поддержку я оказываю только на lenovo-forums.
ps На lenovo-forums мой ник Xakep ...
tigr72 said:
Не имеет смысла. По двум причинам.
1. Если даже я найду решение проблемы, то это будет гарантировано только для S8-50LC.
2. Любую поддержку я оказываю только на lenovo-forums.
ps На lenovo-forums мой ник Xakep ...
Click to expand...
Click to collapse
I should have guessed you are Xakep indeed :cyclops:
это нормально, но не оставляет нам совершенно беспомощным здесь, любую помощь, вы дадите нам здесь или показать нам любой трюк или взломать, то мы примем его
Интересно, если вы можете многооконный порта його планшета)))
got to love Google translate
jazzespresso said:
Интересно, если вы можете многооконный порта його планшета
Click to expand...
Click to collapse
No.
Taste it here it is
tigr72 said:
Не имеет смысла. По двум причинам.
1. Если даже я найду решение проблемы, то это будет гарантировано только для S8-50LC.
2. Любую поддержку я оказываю только на lenovo-forums.
ps На lenovo-forums мой ник Xakep ...
Click to expand...
Click to collapse
I suspected this, because of avatar... nice to see you here...
Just checking in to say thanks for making this thread. As an avid Android tweaker, I was a little hesitant to pick up this tablet because the display at the store said it was a "Best Buy Exclusive" which likely meant little to no developer support but I couldn't pass up the specs for the price. Anyway, I was thrilled to see there was a root method. A little bummed about not having custom recovery or ROMs but with Xposed Framework and Titanium Backup I'm a relatively happy camper. Really pleased with the tablet hardware too.
gallasm said:
Just checking in to say thanks for making this thread. As an avid Android tweaker, I was a little hesitant to pick up this tablet because the display at the store said it was a "Best Buy Exclusive" which likely meant little to no developer support but I couldn't pass up the specs for the price. Anyway, I was thrilled to see there was a root method. A little bummed about not having custom recovery or ROMs but with Xposed Framework and Titanium Backup I'm a relatively happy camper. Really pleased with the tablet hardware too.
Click to expand...
Click to collapse
I was in the same boat like you, was hesitant to buy it, but price $149 (plus had $10 bestbuy gift card), and specs of tablet I could not pass it. Ignore what the store says, it is NOT bestbuy exclusive, what they meant they are the only one sells it...As you already know, this is not wildly pupular device like Samsung, so there's virtually no developer support nor custom ROMs, but still you can root it easily and get your root apps working perfectly fine. I would be a bit careful when using Xposed apps, some will cause some issues, but many of xposed apps I tested works just fine.
Any hint on how to remap some keys in the USB keyboard case I bought for this tablet? The f1-12 keys can be remapped for android functions..
Thanks for the root method!!! I bought the tab for the spec and price and wasn't gonna worry about not being able to mod it. BUT....I found this thread and immediately rooted and went to town on it (somewhat). I am just glad I could root it and change a few thing and get rid of bloat.
Just a tip, xposed and GravityBox work great!!

[Question] How to enable iphone X like gestures on Redmi Note 5?

How to enable iPhone X like gestures on Redmi Note 5 which is available on 5 plus?
you need a China Dev based ROM
bhagyeshrane said:
How to enable iPhone X like gestures on Redmi Note 5 which is available on 5 plus?
Click to expand...
Click to collapse
The question should be posted in other forums of redmi note 5
Adi.s said:
The question should be posted in other forums of redmi note 5
Click to expand...
Click to collapse
i am sorry, i am new to xda so didnt know. i will delete this thread and will shift it to Q&A
Edit: I just got to know that we can't delete threads. Is that true?
bhagyeshrane said:
i am sorry, i am new to xda so didnt know. i will delete this thread and will shift it to Q&A
Edit: I just got to know that we can't delete threads. Is that true?
Click to expand...
Click to collapse
It's ok for now. Once u post it u cannot delete. From next time post in right forum. So that other viewers can actually help u. ?
bhagyeshrane said:
How to enable iPhone X like gestures on Redmi Note 5 which is available on 5 plus?
Click to expand...
Click to collapse
i also want to have it did u find any way...?
in the Chines developer rom
bhagyeshrane said:
How to enable iPhone X like gestures on Redmi Note 5 which is available on 5 plus?
Click to expand...
Click to collapse
You have this feature in miui eu rom and miglobe rom
Install this https://xiaomi.eu/community/threads/8-3-8.43553/
Abid.murain said:
i also want to have it did u find any way...?
Click to expand...
Click to collapse
An app in playstore, called "All in one gestures". This one is what I use with custom roms. Is more than iPhone's gestures
SubwayChamp said:
You have this feature in miui eu rom and miglobe rom
Click to expand...
Click to collapse
But i guess it is not available for Redmi Note 5. Niether i am able to unlock the bootloader. Getting 86006 error.
bhagyeshrane said:
But i guess it is not available for Redmi Note 5. Niether i am able to unlock the bootloader. Getting 86006 error.
Click to expand...
Click to collapse
Miglobe is available for Redmi 5 (called so in this thread) device name Rosy I don´t know if its the same but aspect and wallpaper that shows device is the same http://mi-globe.com/rom-builder-features/?codename=rosy&img=redmi5.png&realname=RedMi+5 also you can add or not some mods in your zip rom to flash it.
Really I don´t tell exactly what is the reason on this error many mentioned in almost all the forum, cause I unlock my last mi max in less than a half hour and now my Redmi 5 Plus came with bootloader unlocked from the seller, so strange method cause I´m sure that they didn´t get any code unlock but anyway.
I Read in some post that is necessary to solved this issue first install china rom with EDL method using testpoint, also anyone mentioned the normal method to enter in EDL that some devices naturally has with combination keys (a trickey method that needs many many patience) and also the other previous option to get EDL before to open back cover with a "flash deep cable" this worked for me in the past trying to put device in this special mode.
Adding to all mentioned I know that some users that flashed TWRP and custom roms with locked bootloader, read carefully this thread and if you want to try just replace all the files mentioned that have to be specific for your device http://xiaomitips.com/guide/how-to-flash-miui-fastboot-rom-on-mi-max-with-locked-bootloader/
Also you have this thread, is more easy that many users think https://forum.xda-developers.com/mi-max/how-to/installing-twrp-locked-bootloader-t3406501
There is a main idea about how to work locked bootloader and why is not possible to flash nothing unofficial on it. It is mainly caused for stock recovery, once you get change it for a custom one you can flash anything you want prevent you to encrypt your data after reboot and prevent you that stock recovery don´t overwrite again to custom recovery..

[Kirin devices] TWRP(ISH) for 8.1 GSIs (tested on Kirin 960)

Duplicate of post on the honor 9 forums, because no one looks on there for stuff anymore
lets make this very clear:
I HAVE NOT DEVELOPED THIS, IT WAS LINKED IN ANOTHER FORUM BY ANOTHER MEMBER WHO ALSO DID NOT DEVELOP IT
this is actually developed by a member over at the Chinese website '7to' http://www.7to.cn, so its a recovery based on TWRP 3.2.1 but seems to have its own UI and feature set.
WORKING
Code:
[COLOR="Black"][LIST]
[*]Boots to TWRP!
[*]Can flash images to system (MUST BE ON SD CARD!!!!)
[*]ADB
[*]Mount system R/W
[/LIST][/COLOR]
NOT WORKING
Code:
[COLOR="Black"][LIST]
[*]Decryption
[*]Data backup
[*]Flash from internal storage (since it cant be decrypted)
[/LIST][/COLOR]
I am not responsible if you brick your device, flash with caution and ONLY on an 8.1 GSI where your current TWRP doesn't work.
This does not do anything to capacitive keys, if they work before flashing they will work after flashing
INSTALLATION
'fastboot flash recovery_ramdisk recovery.img
DOWNLOAD
https://drive.google.com/file/d/1RgerdkXY-B-8XV5buloeCyKYrA2B3Bvf/view?usp=sharing
Credit to whoever the creator of this is!​
ambitiousButRubbish said:
Duplicate of post on the honor 9 forums, because no one looks on there for stuff anymore
lets make this very clear:
I HAVE NOT DEVELOPED THIS, IT WAS LINKED IN ANOTHER FORUM BY ANOTHER MEMBER WHO ALSO DID NOT DEVELOP IT
this is actually developed by a member over at the Chinese website '7to' http://www.7to.cn, so its a recovery based on TWRP 3.2.1 but seems to have its own UI and feature set.
WORKING
Code:
[COLOR="Black"][LIST]
[*]Boots to TWRP!
[*]Can flash images to system (MUST BE ON SD CARD!!!!)
[*]ADB
[*]Mount system R/W
[/LIST][/COLOR]
NOT WORKING
Code:
[COLOR="Black"][LIST]
[*]Decryption
[*]Data backup
[*]Flash from internal storage (since it cant be decrypted)
[/LIST][/COLOR]
I am not responsible if you brick your device, flash with caution and ONLY on an 8.1 GSI where your current TWRP doesn't work.
This does not do anything to capacitive keys, if they work before flashing they will work after flashing
INSTALLATION
'fastboot flash recovery_ramdisk recovery.img
DOWNLOAD
https://drive.google.com/file/d/1RgerdkXY-B-8XV5buloeCyKYrA2B3Bvf/view?usp=sharing
Credit to whoever the creator of this is!​
Click to expand...
Click to collapse
YunLin85 developed i think
YazumiWuHung said:
YunLin85 developed i think
Click to expand...
Click to collapse
And do you know if he developed/published newer version?
Thanks.
very nice, i'll take a look into this
thanks!
I just want to use the magisk,and then i will try it on treble-rom.
couple of bugs
1. screen brightness is somehow set to 182%
2. cannot turn the screen off, it just sets it to a lock screen where it makes it slide to unlock, but the screen is not off, still on
3. its in chinese, i got to change it to engish, but some users arent smart enough to do that
crayonicle said:
2 bugs
1. screen brightness is somehow set to 182%
2. cannot turn the screen off, it just sets it to a lock screen where it makes it slide to unlock, but the screen is not off, still on
3. its in chinese, i got to change it to engish, but some users arent smart enough to do that
Click to expand...
Click to collapse
I have this installed on my honor 9, and those bugs don't seem to occur, and, I know it's in Chinese, but it's easy enough to go into the settings and change it. If the users aren't smart enough to click 2 buttons they shouldn't have an unlocked bootloader.
I did actually try looking for a newer version in the 7to forums, but since it was all in Chinese (and Google translate wasn't too helpful) and the fact that the website is rubbishly designed, I couldn't find anything, but, this works for now, at least it can flash stuff and boots, that ls really all that's needed.
Actually, in chinese forums, its not hard to find this.
Here I share the latest twrp, which could be used in all kirin services and support treble roms in theory, and its develoler is "残芯此生不换".
drive.google.com/file/d/17h0LRPXpWu_dZtFxLEpFGz2Oheh8K8mq/view?usp=drivesdk
741543825 said:
Actually, in chinese forums, its not hard to find this.
Here I share the latest twrp, which could be used in all kirin services and support treble roms in theory, and its develoler is "残芯此生不换".
drive.google.com/file/d/17h0LRPXpWu_dZtFxLEpFGz2Oheh8K8mq/view?usp=drivesdk
Click to expand...
Click to collapse
Did you tried it?
I have a P10, this should be flashed in this way? fastboot flash recovery_ramdisk xxxxxx.img
Thanks a lot! Thanks to this i was able to flash gapps on Android 9.0 on Honor 9
streetu said:
Thanks a lot! Thanks to this i was able to flash gapps on Android 9.0 on Honor 9
Click to expand...
Click to collapse
Android 9 . Which rom for H9 ?
k1ks said:
Android 9 . Which rom for H9 ?
Click to expand...
Click to collapse
For me PHH AOSP works fine Just flashlight and probably NFC aren't working
streetu said:
For me PHH AOSP works fine Just flashlight and probably NFC aren't working
Click to expand...
Click to collapse
Thanks , will test after Havoc.
Anyone know if there have been any updates for this
Why not update the system, ?
My device is Huawei honor v9
Anytime tested this on the p20 Pro?
赛文 to的广告太多了。。。
working on p smart
741543825 said:
Actually, in chinese forums, its not hard to find this.
Here I share the latest twrp, which could be used in all kirin services and support treble roms in theory, and its develoler is "残芯此生不换".
drive.google.com/file/d/17h0LRPXpWu_dZtFxLEpFGz2Oheh8K8mq/view?usp=drivesdk
Click to expand...
Click to collapse
Hi, can you or anybody upload this TWRP please?
The Link is not working (Google Drive say: The owner moved the file to recycle bin)
Thanks

AOSP GSI

No information, because xda`s moder delete some my post
Gaspaddar said:
Description:
-normal AOSP
-must unlock bootloader
Positive
Play Market is pre-installed
Root is pre-installed, it works fully (the magic analog can change the system)
Minuses
Bad headphone signal
GPay won't work
Maybe something else @Gaspadar
Installation
Reboot into Bootloader
Connect your smartphone to your computer
Register via adb
fastboot flash system AOSP.img
Link
Click to expand...
Click to collapse
Nice bro
Can you share some screenshots?
Can i rollback to emui if i want after installing this?
I'm very happy with this
How to flash magisk and root?
Can we get twrp?
Is there any hope for android 11 and 12 for our device in future?
alisadeghian said:
Is there any hope for android 11 and 12 for our device in future?
Click to expand...
Click to collapse
1) Check guide, root yet, screen not have, because working with my version emui
2) Instruction in guides
3)In our device R has yet, but many problem with vendor
Gaspaddar said:
1) Check guide, root yet, screen not have, because working with my version emui
2) Instruction in guides
3)In our device R has yet, but many problem with vendor
Click to expand...
Click to collapse
Aw
Ok Thanks

Question Custom ROM for Xiaomi Pad 5 Pro??

Glad to have been here, I'm so exciting about my new Xiaomi Pad 5 Pro 5G coming for next week so, how about custom ROM we'll see next update? Pixel Experience? or OneOS?
comment below about you guys think about.
I had been already got xiaomi pad 5 pro 5g version
This time,xiaomi restricted dailer apk couldn't run directly.
Also limited couldn't make the apk shortcut by manual.
Even more,xiaomi limited manual install any higher/lower version dialer apk.
So even root first,and flash Magisk voenabler plug-in zip.
This Tablet still couldn't make the volte call
So without contacter and dialer apk function,so far i couldn't breakthrough limited volte function.
If anyone can,please feel free to let anybody know how to do.
Thanks anyway
+1 Have had my MiPad 5 Pro (without 5G) for 3 days. hope it starts soon with a Eu or other version here at XDA
datadelrey said:
Glad to have been here, I'm so exciting about my new Xiaomi Pad 5 Pro 5G coming for next week so, how about custom ROM we'll see next update? Pixel Experience? or OneOS?
comment below about you guys think about.
Click to expand...
Click to collapse
All that can be tried at such an early stage of the device's life is universal GSI ROMs at your own risk. If I'm not mistaken, it won't even require a custom recovery, but the result is unpredictable: from full functionality to soft brick.
bear0705 said:
I had been already got xiaomi pad 5 pro 5g version
This time,xiaomi restricted dailer apk couldn't run directly.
Also limited couldn't make the apk shortcut by manual.
Even more,xiaomi limited manual install any higher/lower version dialer apk.
So even root first,and flash Magisk voenabler plug-in zip.
This Tablet still couldn't make the volte call
So without contacter and dialer apk function,so far i couldn't breakthrough limited volte function.
If anyone can,please feel free to let anybody know how to do.
Thanks anyway
Click to expand...
Click to collapse
Wish I saw this earlier. It's buried on the second page I didn't see. Would have saved me making a thread. I was going to try the Xiaomi contacts and dailer APKS but no point. I also found a very obscure YouTube video from Vietnam I guess trying to use Pad 5 pro 5G to send SMS messages to no avail.
Same issue here I'm using Verizon on LTE
Andy Yans lineageos 19 works by the way.
Austcool said:
Andy Yans lineageos 19 works by the way.
Click to expand...
Click to collapse
Download gsi unzip the .img and then reboot fastboot with commie bunny then reboot to fastbooted using fastboot reboot fastboot.
U will see a blue fastbootd logo (text) then do fastboot flash system ./{lineageos19_gsi_here}.img
No custom GLOBAL ROM signal? Can you install a ROM of PAD 5 GLOBAL?
Austcool said:
Andy Yans lineageos 19 works by the way.
Click to expand...
Click to collapse
Does it really work?
Austcool said:
Andy Yans lineageos 19 works by the way.
Click to expand...
Click to collapse
Which device was based on for the installation?
Austcool said:
Andy Yans lineageos 19 works by the way.
Click to expand...
Click to collapse
I'm new to android devices. Could you do a tutorial on how to perform this procedure?
Austcool said:
Download gsi unzip the .img and then reboot fastboot with commie bunny then reboot to fastbooted using fastboot reboot fastboot.
U will see a blue fastbootd logo (text) then do fastboot flash system ./{lineageos19_gsi_here}.img
Click to expand...
Click to collapse
The ROM for enuma is very huge. Any suggestions of how to flash this huge GSI ROM?
[DiscoveryAndroid] Guide For Flashing GSIs for all Android devices (2021)
Hi every one, in this thread, I will guide How to Flashing GSIs for all Android devices (2021). - A to Z for new babie, just only fastboot guide. - I'm highly recommend using pHH GSIs image rom. (List here) AND DO NOT ASK ME SGSI ROM. /* * Your...
forum.xda-developers.com
It's generic.
EvolutionX is a Great Experience on the Xiaomi Mi Pad Pro 5G as well. If you want something closer to the Google Pixel Experience on the device. I'm running EvolutionX as my daily driver rn.

Categories

Resources