Hello 6t owners.
What car charger are you using? Is there any dash charger for the car?
Thx
There is a dash car charger that is fast, not as fast as the regular charger though.
Do you have a link?
kilasat said:
Do you have a link?
Click to expand...
Click to collapse
i use one similar to this, being using with OP3 and OP6T
https://www.aliexpress.com/item/LUL...-3-Dash-Charging-QC3-0-Quick/32831200841.html
The official Oneplus Dash car charger charges just as fast as the wall charger. About 2% a minute. It's on their website and comes with a 3 foot USB Type-C cable
https://forum.xda-developers.com/oneplus-6/accessories/dash-compatible-car-chargers-t3819031/page2
Here are some more inputs.
I ordered this one ---> https://www.aliexpress.com/item/Ori...153.html?spm=a2g0s.9042311.0.0.27494c4dcx6LfA
I use the dash charger with a power inverter in my car. (Travel for work and the inverter is already in place for my laptop). It seems to be the place I would need charging that fast the most. (Music, screen always on, GPS, etc). If I'm charging at home. A standard 2v charger and cable work just fine, especially since I'm most likely charging over night and don't need to charge as fast.
I ordered from their offical site.
kilasat said:
Hello 6t owners.
What car charger are you using? Is there any dash charger for the car?
Thx
Click to expand...
Click to collapse
one plus has an official car dash charger. i haven't check how fast charges the phone, but when i leave my car my phone always have 100% charge.
Related
Hey guys,
I was wondering if these USB car chargers are compatible for the TP2?
http://cgi.ebay.com/Dual-2-Ports-US...Accessories?hash=item518f99b7a9#ht_3242wt_958
and
http://cgi.ebay.com/DC-Car-Cigarett...wItemQQptZPDA_Accessories?hash=item3a567814a2
and
http://cgi.ebay.com/Silver-Mini-Uni...Accessories?hash=item414bbc871c#ht_2000wt_958
I'm asking because I remember in the past I used a HTC charger to charge the O2 XDA Flame and it charged. However, the phone started acting VERY weird and freeze a lot. I ended up having to hard reset it
Thanks!
I think any USB charger for electronic gaget that has a output of 5.0 v should work. It does not matter if it is an AC charger or and car lighter charger. I got one of these AC and another car lighter charger. There are all 5.0 v output. I use them to charge Ipod and phones.
chompx2 said:
I think any USB charger for electronic gaget that has a output of 5.0 v should work. It does not matter if it is an AC charger or and car lighter charger. I got one of these AC and another car lighter charger. There are all 5.0 v output. I use them to charge Ipod and phones.
Click to expand...
Click to collapse
Thank you
It's best to choose one that can supply enough current (I think the wall charger supplies 2A, but 1A should be ok). Some devices will still trickle charge with a lower current, but others just won't trigger the charging circuits at all.
I had a cheap car charger that seemed to work ok most of the time, but it got worryingly hot after a while.
My TP2 came with an official HTC charger, so I use that now and it's great.
I have noticed that if the phone is OFF then 1A is not enough and usually stops charging but if the phone is ON it completes the charge..but takes for ever.
Has anyone experienced the charging overheat situation where the led flashes orange and green? I dont know if that is the situation but it only happens when I am charging in the car and the unit gets hot.
My old "OEM HTC" charger I got on ebay (the one with the blue HTC light) just stopped charging my phone after about 10-15 uses.
It lights on (charger), but my phone doesn't catch any charge lol
I got a 1A one, and unfortunately it cannot produce enough juice when running the GPS (copilot), after a while the phone shows a message telling the charge current is not enough.
The wall charger that came with the original box is 1A too, thus the problem might be with the cheap car charger.
Brando sells a 2A car adapter that should do the trick. They're out of stock right now, but it may be worth a look.
Hey!
Mine is a cheapo but does the trick. Charges the phone with satnav running, today went from 23% to full in less than 3 hours. Plus it's really tiny so I can keep my ashtray closed all the time. Using it with mini retractable cable, it all fits in the ashtray and it's handy to use.
http://cgi.ebay.co.uk/Micro-Nano-Ti...daptors_SM?hash=item5638c26773#ht_1747wt_1165
3waygeek said:
Brando sells a 2A car adapter that should do the trick. They're out of stock right now, but it may be worth a look.
Click to expand...
Click to collapse
The manual states that the output of the AC charger is 5.0 volts and 1 amp. That means the output of the DC/car charger should be the same. Using a 2 amp current might be charging the device faster but it would probably generate more heat and might shorten the battery life.
one tip, regardless of which charger you end up with, is to not leave the phone plugged in while starting the car. my understanding is that there can be be large voltage surges or fluctuations during the startup. depending on the design on the voltage converter inside the charger, some of that may be making it through to the phone.
i once had a AA NiCd battery smart charger that went wonky after using it in the car a lot, but that was with a straight-through 12V car to charger connector.
I made my own charger for using as a GPS on my motorcycles.
There is a charge select line in the plug. If the phone detects that it is connected to a USB port, the phone will not 'pull' more the 500ma. If that line is set to indicate a non USB port, then the phone will pull 1 amp. MAX (I never saw more then 900ma myself).
If you have the wrong charge plug, it may only charge at 500ma. If you have the correct plug and the charger can manage 5 amps, the phone will still only take 1 amp max.
For a while I used the phone in a waterproof box called an Aquabox. It would overheat during charging. I now only charge the phone when it is not in an enclosed hot space.
I'm still using the off-brand 'for Blackberry' car charger I got back when I had my Kaiser. Seems to be working just fine with this phone as well.
I currently have a Belkin Micro USB charger in my car that I have been using to power / charge my ipod touch. This provide quick charge at 1A. Does anyone think would be an issue to use with the SG2?
cbb77 said:
I currently have a Belkin Micro USB charger in my car that I have been using to power / charge my ipod touch. This provide quick charge at 1A. Does anyone think would be an issue to use with the SG2?
Click to expand...
Click to collapse
No idea, but I use this:
http://www.amazon.com/Samsung-Stand...279A/ref=sr_1_1?ie=UTF8&qid=1320804340&sr=8-1
Dirt cheap at Amazon, original made by Samsung charger.
cbb77 said:
I currently have a Belkin Micro USB charger in my car that I have been using to power / charge my ipod touch. This provide quick charge at 1A. Does anyone think would be an issue to use with the SG2?
Click to expand...
Click to collapse
I read a post here somewhere (dev forum maybe for i9100, fun with resistors thread) that the phone limits itself to 750mA when it charges. So you can use this car charger and it should be ok. I have a verizon charger that has a spare USB port on it, and the phone charges just fine. Only issue I have is the alternator noise that's put out the headphone jack when I am using the car charger. But I have some ways around that I think.
I was using a 1A charger that was giving me digitizer issues so bad that I couldn't complete my unlock pattern. I bought a new charger from AT&T that doesn't have the problem, but it doesn't say anywhere what its output current is.
This is the one I bought: http://www.wireless.att.com/cell-ph...0245&q_categoryid=cat1370027#fbid=UMdBTv5CnSG
You guys have much luck finding power supplies or cables for a generic USB power adapter for the springboard? I will probably use this device as a GPS quite a bit, and would like to have the car charger.
delio77 said:
You guys have much luck finding power supplies or cables for a generic USB power adapter for the springboard? I will probably use this device as a GPS quite a bit, and would like to have the car charger.
Click to expand...
Click to collapse
Ebay has plenty.
Just search for usb charging cable mediapad and iPad usb car charger. The purpose for iPad charger is to make sure that the charger has big enough amp/watt.
Sent from my HTC Glacier using Tapatalk 2
rurou said:
Just search for usb charging cable mediapad and iPad usb car charger. The purpose for iPad charger is to make sure that the charger has big enough amp/watt.
Click to expand...
Click to collapse
Yep, you need at least a 2 Ampere charger.
I used a bog standard 0.5A charger first in the car and the tablet ran out of juice after a few hours. Then I found a 3 Ampere car charger at a fuel station shop and now it runs fine.
I bought a USB-to-Mediapad power connector cable from some german online store to connect the car charger to the tablet. As we all now charging via the micro-usb port does not work.
stefvienna said:
Yep, you need at least a 2 Ampere charger.
I used a standard 0.5A charger first in the car and the tablet ran out of juice after a few hours. Then I found a 3 Ampere car charger at a fuel station shop and now it runs fine.
I bought a USB-to-Mediapad power connector cable from some german online store to connect the car charger to the tablet. As we all now charging via the micro-usb port does not work.
Click to expand...
Click to collapse
Could you please provide a link to the site with usb-to-springboard adapter? I can't seem to find one anywhere
The microUSB port does charge but it is a slow trickle. I can get it from empty to 100% if I plug it into a microUSB charger overnight, but if I need to boost it as fast as possible it has to use the charge port.
ridingonfumes said:
Could you please provide a link to the site with usb-to-springboard adapter? I can't seem to find one anywhere
Click to expand...
Click to collapse
Here you go.. this is the one I got.. pretty pleased with it.. One tip, only use a 1amp charger, with 1,5 or 2 amps the mediapad starts to overheat or something, it overall fails to function properly
http://www.ebay.nl/itm/TABLET-PC-LA...ingstationen&hash=item564af7f0ee#ht_855wt_907
Hello guys,
Could you give fast answer what parameters has original huawei s7-301u charger? I lost my charger and i need buy another ASAP.
Best,
Lolu said:
Hello guys,
Could you give fast answer what parameters has original huawei s7-301u charger? I lost my charger and i need buy another ASAP.
Best,
Click to expand...
Click to collapse
5 volts, 2 Amp. It needs that much power, a smaller ps might burn the house down.
Big thanks to you man!!!
Hi what's a good car charger for my note 3 oops sorry for the misspelling thanks
I'm using this one: http://www.belkin.com/us/F8M668-Belkin/p/P-F8M668/
With a Samsung Multi-Charging Cable. (Which I didn't even know existed until they gave me two.)
I have this one along with the 3.0 original cable from the note 3 charges fast
Anker® 24W 2-Port Rapid USB Car Charger with PowerIQ Technology for... http://www.amazon.com/dp/B00D82O68Y/ref=cm_sw_r_udp_awd_bgnFub1DA938Y
Sweet thanks guys much appreciated
Anyone know of a car charger or cradle that comes with a cable that activates car mode or dock mode when plugged in?
I am surprised to see that I need an original onplus cable to enjoy dash charging, the one that came with my op6t is the usual 1m which is short for my installation. The electricity socket being far from my desk I need a 2 meters cable like the one I always used but dash compatible. Where can I find one?
I just bought the following cable and Dash Charge works perfectly: https://www.amazon.de/dp/B07LBR54RD/ref=cm_sw_r_wa_apa_i_XO8nCbB02GB5G
2 prong extension cable, $1 at the dollar store. Problem solved.
Sent from my OnePlus 6T using Tapatalk
tengtengvn said:
2 prong extension cable, $1 at the dollar store. Problem solved.
Click to expand...
Click to collapse
Not any usb cable will give dash speed, my non dash usb cable only gives me QC2 speed equivalent when plugged to the dash charger
vegetaleb said:
Not any usb cable will give dash speed, my non dash usb cable only gives me QC2 speed equivalent when plugged to the dash charger
Click to expand...
Click to collapse
No, something like this: https://www.frys.com/product/823508...uSa-coo3XdfKwl28XUEdT6l70erTq10YaAiHrEALw_wcB
Sent from my OnePlus 6T using Tapatalk
$12 for 2 pack,each is just over 6ft. Using ampere app these cords charge at roughly 3200 which is identical to the OEM cord included w\phone.
Dash Charger Cable, TITACUTE 2... https://www.amazon.com/dp/B07FJNH8P6?ref=ppx_pop_mob_ap_share
I have been using for 6 weeks, no issues.
Long USB Cable that works with Dash Charging?
Greetings All,
Can anyone recommend a long usb cable, at least 2m, that works with Dash charging?
Thanks
Been using these forever now, 6ft nylon braided and it DOES support dash chsrge. Phone makes noise and lightning bolt flashes when plugged in.
https://www.amazon.com/gp/aw/d/B07FJNH8P6?psc=1&ref=ppx_pop_mob_b_asin_title
The 2m cable that I bought last year for the 6t is starting to go wacko, it will show warp on my 7 pro but it won't charge in warp speed, I bought the one in the last link, I will see if it will charge as fast as stock cable