Related
hi friends
I have sx56 att upgraded wm2003.
I have taken services for gpras and tried to setup in my sx56.
following are the details of gprs settings that my mobile career provided me.
+++++++++++++++++
1. start -> setting -> connection -> tap-connection.
2. under internet setting .... choose "my work network " -> add new modem.
3. tap "general" and connection setting name as "XXXXXXXX"
4. enter connection name as "XXXXXXXX"
5. select "cellular line gprs".
6. by tapping next --- given APN "XXXXXXXXX".
7. user name and password keep blank and tap finish.
8. again go to connection -> manage existing connection -> select proxy setting
9. tap on both the block and go to 'advance' ... in first window write URL and and in WAP setting enter "xx.xx.x.xxx" - 9201. -> tap ok.
10. from the desktop -- tap coverage tower and connect using "XXXXXX" connection.
+++++++++++++++++
ok all the above setpes are done by me and I am able to establsih connection.
I have also checked by command prompt and checked ipconfig details.
I found all assigned ip and dns in it.
the problem is I am not able to open any site in IE browser and page processing shows loading.
can anybody tell me what can be the problem.
thanks
GPRS
Hi All
I have similar problem
I just unlocked my ATT phone using the Wizard
WorKs flawlessly except the Calendar and dTree both end up in German
Is there any fix
The other problem is GPRS
Gprs connects to provider the problem is I am not able to open any site in IE browser and page processing shows "The page you are looking for cannot be found"
can anybody tell me what can be the problem.
Great Forum
Thanks
Maynard
gprs
I just unlock my phone using the xda-developers serv 1.2exe and after that use a upgrade rom and radio from siemens to wm2003
my radio is a.33.02 and the rom version is a.20.09 ENG
and is working beautifull
i have the upgrade if anyone want it but can upload here i tried
send me a pm with email address
Just want to give back the favor, Because of XDA developers i was able to UNLOCK & ROOT my AT&T HOX+
I'm Posting here how i was able to ENABLE MOBILE TETHERING using AT&T stock ROM ( did not change anything, still using original rom)
My HOX+ software info:
Android Version: 4.1.1
HTC Sense Version: 4+
Software Number : 1.19.502.1 710RD
HTC SDK API LEVEL: 4.63
Kernel Version: 3.1.10
Your AT&T HOX+ should be:
1. Unlock ( network unlock)
2. Rooted
3. Apps : SQLITE EDITOR ( this is paid apps)
Here' how i was able to MOBILE Tether using T-MOBILE Network ( able to save money by switching from at&t, no contract)
1. I setup the TMOBILE APN {settings/ Mobile Data/ Access Point Names}
2. Then open SQ LITE EDITOR
3. Go to APPS Tab
4. Look for DIALER STORAGE \ carriers
5. Now look for your TMOBILE APN ( normally its on the bottom of the list)
6. Make sure to copy the NUMERIC & MCC & MNC
7. Then scroll up look for line " ENTITLEMENT" ( PICK ONE)
8. Edit the NUMERIC & MCC & MNC to match T-MOBILE APN ( dont touch the rest of the column)
9. Hit exit or BACK, it will save what you did.
10. See screen shot #1 how it looks like
11. Turn on Mobile Tether ( should have a good network signal, i notice if there are none it stop to tether) I'm using HTC BUILD IN mobile tether no other 3rd party apps needed to do this.
12. See picture # 2 , showing you proof it tether using T-Mobile network
Optional Procedure ( you dont have to do this): To force TETHER your phone by altering HOTSPOT ON from value 0 to 1 (SQ lite editor: Setting Storage\system\ ). Then restart the phone, it will automatically activate MOBILE Tether. See picture #3
DISCLAIMER: I did everything above, and it mobile tether my phone without any hardware effect. I'm still using AT&T STOCK without flashing any ROM. The only thing i did was to modify the ENTITLEMENT area of the phone. I wont be responsible if you do anything and your phone got brick, you know thats always the risk in modifying any phone.
It Works!!!
Hi,
Thank you for the info. I've tried it and tested it, and I can confirm that it works.
It needed 2 tries for me though, had to restart. Probably due to the value stored in cache.
It's works for Brazilian Carrier Vivo!
Hi all,
Thank you for the info. I've tried it and tested it, and I can confirm that it works.
In from Brazil and changed the T-Mobile data for Vivo (BR Carrier) and it's is working, I was trying to solve this issue and now I'm very happy.
My HONX+ is an AT&T rooted.
Honor 7 , china version, PLK-01H, firmware 162 / updated to 173.
Initially, after start, work fine with my router in 2.4 and 5Ghz bands, without any problems.
I install Sim-card, auto-updated firmware from 125 to 162, and found, that my phone now see only 2.4Ghz wifi, and only in G standarts (not N), max. 54Mbit connection.
I tried change regions/ time zones in Honor, but see same result.
With newest 173 firmware - same result.
May be, anyone know solutions for this bug ?
PLK should actually be the European version, but the suffix H is new to me.
The version sold by VMall is PLK-L01 with "region" C432 and ROM version B100.
As to your issue : that is typical for Huawei, update ROM to fix one issue and break/delete another feature. That is, if 5GHz is important, you will have to roll back to the version where it worked.
Send a feedback to Huawei using the stock "Hicare" app..
mru55 said:
PLK should actually be the European version, but the suffix H is new to me. .
Click to expand...
Click to collapse
It's chinese version.
with CN region.
As to your issue : that is typical for Huawei, update ROM to fix one issue and break/delete another feature. That is, if 5GHz is important, you will have to roll back to the version where it worked.
Click to expand...
Click to collapse
It's bug with non-correct work with sim-card, Honor non-correctly determine location and permitted bands/standarts after I insert my sim-card (Ukrainian operator Kyivstar) and disable N band - in 2.4 phone continue work at G standard, but stopped work in N. In 5 Ghz without N phone simply can't work with 5N wifi AP.
I enabled 802.11d frames (sends country codes to wifi clients) at my AP, with different country codes, CN, EU, US and DE, but still has problem with phone.
Currently I rooted my Honor and continue work with this problem.
I directly enabled all 801.11n / 40Mhz band / parameters in wpa_supplicant.conf configuration file , but receive same result : 802.11n still no works.
Honor 7 usee some additional config file, but whats this file ?
Hmm,
wpa_supplicant service ignore configuration file , located at /system//etc/wifi, and at every run create new config files at /data/misc/wifi, also ignore start scripts at / (if I try change it, it simply re-created).
__
I found source of problems with wifi in Honor 7.
EMUI-Android-5.0.2 service read country code from SIM card/operator and use it for wifi settings.
Huawei version of WPA service ignore .../etc/ ...wpa_suppliciant.conf ,
also ignore country code in build.prop,
Service wrote country code from SIM card to DB /data/data/com.android.providers.settings/databases/settings.db
Huawei wifi database is very buggy, and if your country (in my case - UA) is marked in
Huawei wifi DB as "N protocol disabled, 5ghz disabled" - you receive only 2.4ghz band and G-proto.
(In Ukraine N protocol is officially permitted, and 5ghz band also permitted)
temporary solution : [only for rooted phones]
start SQLite editor, or console , and correct country code for wifi, for example
and change wifi_country_code .
"INSERT INTO global (name, value) VALUES ('wifi_country_code', 'de');"
More safe way: copy file, change it, and copy back.
after this we restart wifi service,
and I immediately received :
[speedtest tested, internet connection, 100Mbit channel]
At 5Ghz band : (40 Mhz ) 150Mbit connect, 87 Mbit real download, max.real download - 90.5 Mbit, upload - 73.8 Mbit
2.4Ghz and (20 Mhz ) , 65Mbit connect (we can't receive more with 20 mhz and 1-stream), 38,6 Mbit real download,
Who say "bad wifi hardware" ? 8=-)
after reboot settings still due,
but after any on/off gsm/3G (airplane mode, for example) or change SIMcard phone read country code from sim card, receive UA, see Huawei buggy database and disable N proto and 5 ghz.
This solution - only for test !
We can found and patch wifi settings DB, but for normal work Huawei must update wifi settings DB.
i have got the same problem i'm in uk virgin on 50 MB and on ookla shows only 25 any solution?
honor 7 ®
After so much time this issue is still in progress
My PLK-L01 is B380 firmware and EMUI 4.0.1 and wifi max speed 50 Mb.
Do you have a final solution? Thank you
Hi, I have B396 Firmware and my phone can't see 5GHz WiFi. Also connecting with 2,4GHz at 72Mbps only, Honor 7 lite can 150Mbps.
So, where I can find configuration file on 6.0 firmware. I can't find settings.db at /data/data/com.android.providers.settings/databases/
zakk87 said:
Hi, I have B396 Firmware and my phone can't see 5GHz WiFi. Also connecting with 2,4GHz at 72Mbps only, Honor 7 lite can 150Mbps.
Click to expand...
Click to collapse
You have L01 model ?
B396 can't see any channel on 5GHz WiFi or only some channels ? (Can you test it with different channels on WiFi AP/router ?)
Sorry, now I can see my FortiAP, after change 5GHz channel from 80MHz to 40MHz.
Nice.
5Ghz with 40MHz works fine ? N or AC ?
Its syncing to 180Mbps, but I can't test internet speed.
Recently I had some bad experiences with bad reception.
At the place of my new girlfriend is very bad GSM and LTE reception. At her place of residence I could not be reached with my OP3T and I could not make outgoing calls. When I called her from home, our conversations were interrupted every few minutes.
Neither with T-Mobile (company card) nor with my Netzclub+ Sponsored card could I make any real phone calls. When I recently gave her a Oneplus 3 I decided to make both devices (+my OP3T) fit for VoWifi and VoLTE.
The goal was that it should work with Lineage 17 for microg.
I have seen here some instructions that helped. There was always just a little something missing to make it work.
Below are the steps necessary to get VoWIFI and VoLTE for T-Mobile up and running:
No root solution required, no bootloader unlock required.
Ony TWRP needs to be installed.
1. Install QPST, (have used 2.7.460)
2. Install Quallcomm Diag Driver, i used 1.1 (have used 10037.3)
3. Extract modem firmware via TWRP (system/etc/firmware, or use mine from download link)
4. Enable adb root in developer settings
5. Enable USB Debugging and connect to device via adb
adb devices (check if device is shown)
adb root
adb shell
setprop sys.usb.config diag,serial_smd,rmnet_ipa,adb
6. Open PDC from QPST with admin rights and choose phone
7. Rightclick on "Overseas..." and deactivate for Sub0 and Sub1
8. Remove the "Overseas..." completely (select it and click remove)
9. Rightclick on "H3G Denmark Commercial" and set config for Sub0 and Sub1
10. Rightclick on the profile again (currently pending state) and select activate a few times until Sub0 and Sub1 are active
11. Modify Build.prop (system/build.prop)
Extract with TWRP and modify locally and add this new block underneath
block #VENDOR_EDIT
[...]
#VOLTE
persist.dbg.ims_volte_enable=1
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.dbg.wfc_avail_ovr=1
persist.radio.rat_on=combine
persist.radio.data_ltd_sys_ind=1
persist.radio.data_con_rprt=1
persist.radio.calls.on.ims=1
persist.sys.cust.lte_config=true
ro.radio_gpri=1
ro.amrwb_gpri=1
persist.data.iwlan=1
#end
[...]
Overwrite the original build.prop with your new one and chmod 0644 (both using
using TWRP File Manager) the file.
12. Put VoWIFI + VoLTE simcard into Slot 1 of sim tray.
13. In Lineage enable VoLTE and Wifi Calling (enable prefer wifi)
To check:
After step 13 wait 20 seconds until sip registration with provider completed, then dial USSD code *#*#4636#*#* to open Field test
Open "Phone information" and check ims registration state
Ims registration=registered means you had success
The provider profile change is done at the EFS partition and stay there until you restore this one via twrp.
If Wifi is off VoLTE is used automatically, sadly Lineage OS 17.1 does not have a VoLTE indicator. But you notice that LTE stays on during call and that there is no delay now.
Without VoLTE there was a 3 seconds delay to switch from LTE to 3G/2G to make the call.
If you call via VoWIFI a new Wifi Icon is displayed in Call window.
Sometimes VoLTE gets preferred over VoWifi, although in wifi call you have set wifi call is prio.
Not sure yet what triggers this.
If you use Volte OpenMarket Commercial profile VoLTE + IMS Video call works, but not VoWIFI. So for us Denmark profile is perfect.
VoLTE also works with Netzclub (O2) card in slot one, but not VoWIFI. Could work with switching to o2 IMS apn (not tested yet since i only plan to use it for telekom currently).
I read that only slot 1 supports VoLTE and VoWIFI (chipset related) which may not be true since during the process i had a condition with VoLTE working in both sim slots (+ ims registred for both). This happened when i loaded the "Idea..." profile for testing purposes. Somehow it triggered a connection crash and did not change the profile but enabled VoLTE for both cards (this time t-mobile volte working in slot 2, netzclub+ volte working in slot 1). But since VoWIFI did not work i loaded Denmark once again and now only slot 1 worked again.
Now it is even possible to activate airplane mode and to call with T-Mobile number via Wifi.
Really cool.
https://mega.nz/file/NUcUxYRR#V2sWJuHSYxHJOuh0vAK-j5777mpT3c6sMyNr24JEwjM
Edit 2020-Oct-03:
Temporary magisk installation no longer required with latest lineage os 17.1 / lineage os 17.1 microg.
Just enable adb root in developer option, and in adb shell type "adb root"
Also attached mbn files only work for 3t, will update download link soon to contain 3 files, too
Can confirm, works on NOS 11 without using *#*#4636#*#*#. No VoLTE logo on the Status Bar, but it has the HD Sign when calling on Google Phone. Thanks for the guide!
thes3usa said:
Can confirm, works on NOS 11 without using *#*#4636#*#*#. No VoLTE logo on the Status Bar, but it has the HD Sign when calling on Google Phone. Thanks for the guide!
Click to expand...
Click to collapse
Would you tell which provider u use? also t-mobile germany?
zezinho7 said:
Would you tell which provider u use? also t-mobile germany?
Click to expand...
Click to collapse
Nope, I'm from Sri Lanka and I use the only provider that gives VoLTE. I had to google which option works with my Carrier, which was "VoLTE_OpenMKT....". Basically works with any carrier that provides VoLTE, a google search is needed to find which description to enable and if you can't, you need to test which ones are required for VoLTE.
Just me dropping by saying this was super helpful!
Running an OP3 on LOS 18.1. Wanted to avoid going back to OOS 9.0.6.
Enabled VoLTE on jaMobil! (T-Mobile Germany Network). I used the "Volte_OpenMkt-Commercial-CMCC" profile.
My profiles were fairly empty - not a single European Country name in the profiles. But worked Thanks again.
EDIT: Since I used the OpenMkt Profile I got everything but VoWifi working. But I don't have any country-specific profiles. Can I load yours somehow?
Ive had this issue and ive found just changing the build.prop locally on the device - Using TWRP
# Debug Options
persist.dbg.ims_volte_enable=1
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.dbg.wfc_avail_ovr=1
# Radio Options
persist.radio.rat_on=combine
persist.radio.data_ltd_sys_ind=1
persist.radio.data_con_rprt=1
persist.radio.calls.on.ims=1
Does the trick
Hallo, I have a problem with the device profiles for the modem. In the firmware there are the mbn-files in /system/etc/firmware/mbn_ota in two directories: mcfg_sw and mcfg_sw_NoCDMA. In QPST I can see the profiles from mcfg_sw, but not the ones from mcfg_sw_NoCDMA which are needed to use the op3 with the german telekom. What am I doing wrong? Trying to install the files via QPST also doesn't work, by using the load button I can choose a file, but the profile does not appear in the profiles.
Would perhaps sombody here who could explain the complete mechanism depending the mbn files in the firmware directory and the profiles shown in QPST?
Thank you very much in advance!
PS: VoLTE worked for a couple of days with the profile CMCC_Volte_OpenMkt-Commercial, but unfortunately the german telekom changed something, so it doesn't work anymore.
felixchris said:
Just me dropping by saying this was super helpful!
Running an OP3 on LOS 18.1. Wanted to avoid going back to OOS 9.0.6.
Enabled VoLTE on jaMobil! (T-Mobile Germany Network). I used the "Volte_OpenMkt-Commercial-CMCC" profile.
My profiles were fairly empty - not a single European Country name in the profiles. But worked Thanks again.
EDIT: Since I used the OpenMkt Profile I got everything but VoWifi working. But I don't have any country-specific profiles. Can I load yours somehow?
Click to expand...
Click to collapse
were you succesful enabling volte/vowifi in the meantime? I'm not able to make it working ...
accuphase said:
were you succesful enabling volte/vowifi in the meantime? I'm not able to make it working ...
Click to expand...
Click to collapse
Switched to a OP 9 Pro in the meantime. But as i have said. VoLTE worked vor me. VoWifi not.
Good news for anyone having the Wing fall Back to 3G when making a call. You can activate VoLTE using a mix of the two following guides:
Guide:-How To Activate VoLTE,ViLTE,VoWIFI&ViWIFI LG Devices-LG Velvet 5G
Hi Guys Am Baljeet From India There Is A Path To Force Enable VoLTE On The"LG Velvet 5G LM-G900" Specifically Your Version Which Is The "LM-G900". By Default This Feature Is Disabled On This Model. Follow These Steps Given Below: A). Go To The...
forum.xda-developers.com
and
Lg g8x,g8,v60 Volte enable for all carriers, unlisted countries also
I will try to keep this post as small as possible. This will enable Volte for Phone ranging from Lg g8x, g8 and V60 without root or modifying the system files. Many have posted ways to get it, Iam only trying to help out the small bits missing...
forum.xda-developers.com
To make it as short as possible:
1) Create an empty directory named "enable_ue" in the root of the phone's main storage, using you prefered file explorer (like for exemple Cx Explorer or ).
2) From the LG Phone dialpad and with your SIM card inserted, type #*462633*#100# (for european LG Wing - LM-F100EMW) to get into the Hidden Menu. From there enter Field Test, then Universal Enabler -> Create New Config. Click on the four last check boxes VoLTE, ViLTE, VoWIFI and ViWIFI to enable these options. You won't be able to enter this setting if you haven't created the empty directory under point 1).
Go back to Field Test and enter Modem Setting to enable 5G if you haven't already -> RAT Selection -> SIM 1 Mode - > select GSM/WCDMA/LTE/5G or whatever you need + 5G. Go back and do the same with SIM 2 after, if you use it. Network mode in the network settings will then not show "5G prefered", but a number, like "26" in my case.
3) Go back to Field Test menu and enter IMS Stting. If you have Slot - 0 : OPEN / EU and Slot - 1 : OPEN / EU (or something else on each side of the / ), then you did everything right to this point. Exit the Hidden Menu and get your SIM out of the phone.
4) Enter th Hidden Menu again without the SIM inserted. Go back to IMS Setting and click on Slot - 0.
Under Subscriber enable IMS,ISIM & USIM.
Under Xcap\Ut. -> General, enable UT & USSD Over IMS
Under ETC, enable Check IMS Registration, Use rule-ID from responsem& Query on bootup
Under GPRI VoLTE/VoWIFi, enable VoLTE, ViLTE, VoWIFI & VIWIFI
Under Test, Preference Operator can be set as OPEN (what I did), or your carrier short name, or your County. Apparently does not make difference for some operator but some do require it to same name as theirs.
Preference Country this is important as this decides if VoLTE gets enabled, Find your country short code example USA is US , India is IN. Europe is EU. Find and try different short codes, I put EU.
Enable Support Volte AT command, VoNR, UAC Enabled & VoLTE Setting Enabled
You can now exit the Hidden Menu & insert your SIM back in. If everything went well, you should see the VoLTE icon showing up on the left of the network in the task bar, on the (my) Wing it's a small lifted phone headset with wave coming out of it. If you don't have it, check under the phone network settings - Mobile networks, if you got the VoLTE option and if it's activated. You might have to repeat some of the steps above with the SIM card inserted (as I had to) to make it work. Don't forget to check the settings for both SIMs if you use two. Not sure if all setting are kept if you reboot or reset the phone. You might have to repeat the preocess or part of it on each reboot, as for enabeling the 5G option.
Was tested on Android 12, as my phone didn't get Android 13 yet. But it's also working on my Velvet 5G that is on A13.
Many thanks to Baljeet Khairwal and johndaniel for their guides + all other persons who helped in the two threads.