I just bought an Explorer in Chineese Rom. Can i make it global?
If yes can you point me to a step by step how to guide? Thanks
I wouldn't but you never know
I think you can't.
Because Mi 8 Explorer Edition have a different codename and called "ursa", but I think Mi 8 Pro and 8 UD (named "屏幕指纹版" in China) can flash each other (when unlocked bootloader), they have the same codename called "equuleus".
Yes you can, i just trying on my ursa last week.
The step (Must Unlocked Bootloader):
1. Download FASTBOOT rom Global Stable/Dev for Mi 8 Pro (Equuleus) (.tgz)
2. Rename file to .zip and extract
3. Edit Flash_Bat.all (line 1 and 2 replace equuleus with ursa) with notepad/notepad++
4. Open Mi Flash and boot your into fastboot mode
5. Plug the usb cable on your pc/laptop
6. Choice Flash and Clean All on under and ready to flashing
7. Click flash and wait until finish
8. Done your ursa will automatically reboot into system with new codename: equuleus and Global ROM!
(Note: On this rom you can't install twrp permanently and can't flash magisk for root, this rom only pure miui rom. I don't know on new update global rom v.10 equuleus, I'm not yet trying)
DWYOR! And Enjoy!
Sent from my MI 8 Explorer Edition using XDA Labs
NOS_bzone said:
Yes you can, i just trying on my ursa last week.
The step (Must Unlocked Bootloader):
1. Download FASTBOOT rom Global Stable/Dev for Mi 8 Pro (Equuleus) (.tgz)
2. Rename file to .zip and extract
3. Edit Flash_Bat.all (line 1 and 2 replace equuleus with ursa) with notepad/notepad++
4. Open Mi Flash and boot your into fastboot mode
5. Plug the usb cable on your pc/laptop
6. Choice Flash and Clean All on under and ready to flashing
7. Click flash and wait until finish
8. Done your ursa will automatically reboot into system with new codename: equuleus and Global ROM!
(Note: On this rom you can't install twrp permanently and can't flash magisk for root, this rom only pure miui rom. I don't know on new update global rom v.10 equuleus, I'm not yet trying)
DWYOR! And Enjoy!
Sent from my MI 8 Explorer Edition using XDA Labs
Click to expand...
Click to collapse
May well not provide support for the 3d face unlock - as this feature is not available on the Mi 8 Pro - I have done the flashing the other way around - Mi 8 explorer ROM on Mi 8 Pro - everything running fine for 2 and a half months.
I need to try it...
Thanks @NOS_bzone
Any Idea about OTA after flashing equuleus ROM on ursa Phone?
anasmhds said:
I need to try it...
Thanks @NOS_bzone
Any Idea about OTA after flashing equuleus ROM on ursa Phone?
Click to expand...
Click to collapse
OTA is work fine, you just flash downloaded rom via updater/twrp.
Sent from my Xiaomi MI 8 using XDA Labs
NOS_bzone said:
Yes you can, i just trying on my ursa last week.
The step (Must Unlocked Bootloader):
1. Download FASTBOOT rom Global Stable/Dev for Mi 8 Pro (Equuleus) (.tgz)
2. Rename file to .zip and extract
3. Edit Flash_Bat.all (line 1 and 2 replace equuleus with ursa) with notepad/notepad++
4. Open Mi Flash and boot your into fastboot mode
5. Plug the usb cable on your pc/laptop
6. Choice Flash and Clean All on under and ready to flashing
7. Click flash and wait until finish
8. Done your ursa will automatically reboot into system with new codename: equuleus and Global ROM!
(Note: On this rom you can't install twrp permanently and can't flash magisk for root, this rom only pure miui rom. I don't know on new update global rom v.10 equuleus, I'm not yet trying)
DWYOR! And Enjoy!
Sent from my MI 8 Explorer Edition using XDA Labs
Click to expand...
Click to collapse
I've done all the steps, but when I start to flash, it says error "miss match image"
Anything wrong with it?
HendrikUtama said:
I've done all the steps, but when I start to flash, it says error "miss match image"
Anything wrong with it?
Click to expand...
Click to collapse
If you following right step renaming, you will never get error "miss match image". Read carefully
Sent from my Xiaomi MI 8 using XDA Labs
Related
Hello guys today i unlocked my bootlader officially on Redmi Note 3 Snapdragon, and now i want to install Twrp and flash Xiaomi.eu ROM but i don't have any idea how to do it.
I searched everywhere but i didn't understand any tutorials. I saw something about patching boot.img, what boot.img should i patch the one from the ROM that i want to install? And how to do it?
I will really appreciate if someone helped me....thanks in advance!
I am on official GlobalBeta 6.4.28
Sent from my Redmi Note 3 using Tapatalk
It's simple. You download the rom you want to have, copy it to your phone's memory, install twrp, reboot to twrp, flash the rom, (optionally wipe data), flash a file called universal_boot.img_patcher.zip
You can find this file in a thread about safe twrp as far as I can remember.
Sent from Note 3, Xiaomi Redmi Note 3.
mr.loverlover said:
It's simple. You download the rom you want to have, copy it to your phone's memory, install twrp, reboot to twrp, flash the rom, (optionally wipe data), flash a file called universal_boot.img_patcher.zip
You can find this file in a thread about safe twrp as far as I can remember.
Sent from Note 3, Xiaomi Redmi Note 3.
Click to expand...
Click to collapse
The problem is i cant find a way how to install twrp
Sent from my Redmi Note 3 using Tapatalk
LiRi2000 said:
The problem is i cant find a way how to install twrp
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
The easiest method I have found out is using Cofface TWRP. Just download the image file and use fastboot/flashify to flash it. No need for patched boot.img or anything else.
Download TWRP and flash it from fastboot... If you don't even know how to flash TWRP then you shouldn't be rooting and flashing roms and stuff.
LiRi2000 said:
The problem is i cant find a way how to install twrp
Sent from my Redmi Note 3 using Tapatalk
Click to expand...
Click to collapse
Let me keep it simple for you.
1. Install adb and fastboot first on ur pc.
2. Go to twrp folder. Along with shift key do a right click, then click on open command window here.
3.Type adb reboot bootloader in command prompt
4. Now type fastboot flash recovery twrp.img
5. Fastboot reboot
Please ensure usb debugging is on under developer options.
Sent from my Redmi Note 3 using XDA-Developers mobile app
My RN3 having officialy unlocked bootloader.When i update incremental OTA (MIUI 8 Global Beta 6.8.11 to 6.8.24) through TWRP, device stucked at Mi Logo (boot loop).Then i Flash Fastboot rom of MIUI 8 Global Beta 6.8.24 through MiFlash Tool.Finally Device is working but while flashing it removes root access and bootloader again LOCKED again.
While proceeding with MiUnlock it show's following errors
Your device isn't supported by Mi Unlock.
And while applying again on mi unlock page it shows following error
Sorry your application has been rejected
itzsarath said:
My RN3 having officialy unlocked bootloader.When i update incremental OTA (MIUI 8 Global Beta 6.8.11 to 6.8.24) through TWRP, device stucked at Mi Logo (boot loop).Then i Flash Fastboot rom of MIUI 8 Global Beta 6.8.24 through MiFlash Tool.Finally Device is working but while flashing it removes root access and bootloader again LOCKED again.
While proceeding with MiUnlock it show's following errors
Your device isn't supported by Mi Unlock.
And while applying again on mi unlock page it shows following error
Sorry your application has been rejected
Click to expand...
Click to collapse
Try unlocking boot loader unofficially
[email protected] said:
Try unlocking boot loader unofficially
Click to expand...
Click to collapse
How?
Procedure Please
itzsarath said:
How?
Procedure Please
Click to expand...
Click to collapse
log out from existing mi account and create a new one. you can unlock via new one.
dont delete existing account
itzsarath said:
How?
Procedure Please
Click to expand...
Click to collapse
This could be helpful
Give a thumbs up if you found it useful
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
----------------------------------------------------------------------------
Now if you want to install any other ROM like cm13
Procedure for ROM installation
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine
---------- Post added at 05:34 AM ---------- Previous post was at 05:33 AM ----------
Official method is worst. Its not like Motorola who gives unlock code within a min.
Try unofficial above method
Do we still need to flash modified Boot.img for first time flashing TWRP ?
http://forum.xda-developers.com/red...official-twrp-3-0-2-0-recovery-redmi-t3352966
Thanks
[email protected] said:
This could be helpful
Give a thumbs up if you found it useful
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
----------------------------------------------------------------------------
Now if you want to install any other ROM like cm13
Procedure for ROM installation
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine
---------- Post added at 05:34 AM ---------- Previous post was at 05:33 AM ----------
Official method is worst. Its not like Motorola who gives unlock code within a min.
Try unofficial above method
Click to expand...
Click to collapse
tthanks a lot for the steps. btw which twrp does this zip includes ? safe or alka or any other ?
can i flash miui europe with this unlock method? do i have to take an additional step?
smustafasms said:
tthanks a lot for the steps. btw which twrp does this zip includes ? safe or alka or any other ?
Click to expand...
Click to collapse
Try safe twrp
[email protected] said:
Try safe twrp
Click to expand...
Click to collapse
if i do this proceedure and doesnt flash rom afterwards will my existing miui8 stable boot normally ? or its important to flash custom rom ?
thanks for ur help
smustafasms said:
if i do this proceedure and doesnt flash rom afterwards will my existing miui8 stable boot normally ? or its important to flash custom rom ?
thanks for ur help
Click to expand...
Click to collapse
Yes you need to flash a ROM. Whether it is official miui 8 or beta miui 8 or any custom ROM. Cm13 and RR v5.8.0 7.1-N is better.
Now if you need your ROM back with twrp and root access. Just install miui 8 official ROM through twrp and don't try to change the recovery its the safe twrp I provided with. And its important for unofficially unlocked bootloaders like you.
Since it is official miui 8 so it will block your bootloader but to prevent this just install universal boot image patcher after installing this ROM.
You can find it on net and after that reboot and install. Now to get root access download and install SuperSU zip from net via twrp and reboot.
[email protected] said:
Yes you need to flash a ROM. Whether it is official miui 8 or beta miui 8 or any custom ROM. Cm13 and RR v5.8.0 7.1-N is better.
Now if you need your ROM back with twrp and root access. Just install miui 8 official ROM through twrp and don't try to change the recovery its the safe twrp I provided with. And its important for unofficially unlocked bootloaders like you.
Since it is official miui 8 so it will block your bootloader but to prevent this just install universal boot image patcher after installing this ROM.
You can find it on net and after that reboot and install. Now to get root access download and install SuperSU zip from net via twrp and reboot.
Click to expand...
Click to collapse
in edl mode when i try to run flash flash twrp.bat file its get stuck on waiting for device
smustafasms said:
in edl mode when i try to run flash flash twrp.bat file its get stuck on waiting for device
Click to expand...
Click to collapse
Oh no. This problem still continues.
I think you have to flash global kenzo 7.0 ROM through mi flash program on PC and then proceed to edl and flashing twrp.
I will be posting the instructions. Today only.
But I have unlocked it without this method
+1 , I get waiting for device also - because cannot see adb devices Drivers are installed
and when i try flashing a developer rom through miphone tool , im always getting errors
MODS: Please move this question to the HELP section - incorrectly posted. Thanks.
Hello,
I am trying to root the Global MIUI _V10.2.1.0.PECMIXM ROM using Magisk. I want my phone to remain encrypted, and having spent all day today trying to achieve this, I am turning here for help.
I have tried flashing via Fastboot and TWRP, have tried flashing Disable DMVerity (without disabling the force encryption) before, and after flashing Magisk. I hava managed to get Magisk 18 flashed and able to boot to the ROM, but when I open Magisk Manager (Installed by the flash) it updates itself and says it needs to install Magisk, proposing to download it - or patch boot img.
Every time I try to flash the downloaded zip, or try fastboot flashing the modified boot.img, the phone won't boot - it just ends up in TWRP recovery.
I have wiped data 100s of times to try to fix this, to no avail.
I have tried to boot into TWRP without flashing it, but this just hands on the TWRP flash screen every time.
Any help / tips would be appreciated.
Were you following any tutorial post? Recent xiaomi phones come with more strict policy on bootload locks. I'm not familiar with it, but if I didn't misunderstand, without BL unlock it's kinda dangerous to flash anything on the phone.
msg7086 said:
Were you following any tutorial post? Recent xiaomi phones come with more strict policy on bootload locks. I'm not familiar with it, but if I didn't misunderstand, without BL unlock it's kinda dangerous to flash anything on the phone.
Click to expand...
Click to collapse
Thanks for replying. Yes, following tutorials, have unlocked my bootloader and can flash ROMs, just cannot get the latest MIUI 10 Global Stable rooted, without decrypting the phone. I have managed it on the Xiaomi.eu global stable, but not with the original Stock ROM.
Has anyone succeeded?
hello bro, u can try my way.
NEED:
unlock bootloader.
folder ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
twrp / u can download all in my GG driver or internet from other source if u scare virus (^o^)
diver ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
PREPARING:
download and copy to phone store and folder ADB
u should rename file TWRP with short name, any name u can remember. (ex: twrp.img or aaa.img, etc....)
install diver for PC/ LAP, u can try to plug mi phone in case FASTBOOT and check in DEVICE MANAFER of PC/ LAP.
remember ENABLE USB debugging on phone
OK, ACTION:
open CMD/ command window in folder ADB (u can put this folder at any diver on PC / LAP) with right click at this folder.
type all commands, follow with contrucs:
adb reboot bootloader (past this if u are in BL)
choose 1 in 2 ways:
1.
fastboot flash recovery twrp.img (do it to install recovery cook replace recovery stock)
fastboot flash misc misc.bin (do this line if u use stock folder china - TWRP-3.2.3-1202-XIAOMI8UD-CN-wzsx150-fastboot.7z)
fastboot boot twrp.img (do it for reboot to recover cook)
2.
fastboot boot twrp.img (do it, u use recovery temporary recovery cook and very easy, find file recovery, install it)
(test again by to use temporary reovery, reboot to recovery again)
note: i like second way, very easy and fast with pro person (^o^)
i tested in all miui stock (china, global)
HAVE FUN \(^o^)/
this link for all
https://drive.google.com/open?id=1uT8g1oOOkD27P2fylNzlAlXrT8PbCJEs
do note use it if u scare virus, malware, etc........ \(^o^)/
reply me if u can not apply all or do not dowload my GG driver.
u can read and do all with this stock link in miui en (http://en.miui.com/thread-3671565-1-1.html)
t4manh198E said:
hello bro, u can try my way.
NEED:
unlock bootloader.
folder ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
twrp / u can download all in my GG driver or internet from other source if u scare virus (^o^)
diver ADB / u can download all in my GG driver or internet from other source if u scare virus (^o^)
PREPARING:
download and copy to phone store and folder ADB
u should rename file TWRP with short name, any name u can remember. (ex: twrp.img or aaa.img, etc....)
install diver for PC/ LAP, u can try to plug mi phone in case FASTBOOT and check in DEVICE MANAFER of PC/ LAP.
remember ENABLE USB debugging on phone
OK, ACTION:
open CMD/ command window in folder ADB (u can put this folder at any diver on PC / LAP) with right click at this folder.
type all commands, follow with contrucs:
adb reboot bootloader (past this if u are in BL)
choose 1 in 2 ways:
1.
fastboot flash recovery twrp.img (do it to install recovery cook replace recovery stock)
fastboot flash misc misc.bin (do this line if u use stock folder china - TWRP-3.2.3-1202-XIAOMI8UD-CN-wzsx150-fastboot.7z)
fastboot boot twrp.img (do it for reboot to recover cook)
2.
fastboot boot twrp.img (do it, u use recovery temporary recovery cook and very easy, find file recovery, install it)
(test again by to use temporary reovery, reboot to recovery again)
note: i like second way, very easy and fast with pro person (^o^)
i tested in all miui stock (china, global)
HAVE FUN \(^o^)/
this link for all
https://drive.google.com/open?id=1uT8g1oOOkD27P2fylNzlAlXrT8PbCJEs
do note use it if u scare virus, malware, etc........ \(^o^)/
reply me if u can not apply all or do not dowload my GG driver.
u can read and do all with this stock link in miui en (http://en.miui.com/thread-3671565-1-1.html)
Click to expand...
Click to collapse
Thanks for replying. However, this tells me how to flash TWRP, how to boot to TWRP - I have no problem doing that whatsoever. I can successfully do that again and again.
What I have not been able to do is flash Magisk v18 on v10 stock ROM and be able to boot successfully. It bootloops into TWRP.
My post help u to install twrp or flash twrp
I do not know your mean what is flash twrp !?
Reboot to recov cook by press volumn +/- and power button
Use magisk 17.1 stanle, u can find it in my gg driver or download in miui eu 's page
---------- Post added at 05:03 AM ---------- Previous post was at 05:02 AM ----------
nealed said:
Thanks for replying. However, this tells me how to flash TWRP, how to boot to TWRP - I have no problem doing that whatsoever. I can successfully do that again and again.
What I have not been able to do is flash Magisk v18 on v10 stock ROM and be able to boot successfully. It bootloops into TWRP.
Click to expand...
Click to collapse
1 in 2 ways is certainly successful
nealed said:
Thanks for replying. However, this tells me how to flash TWRP, how to boot to TWRP - I have no problem doing that whatsoever. I can successfully do that again and again.
What I have not been able to do is flash Magisk v18 on v10 stock ROM and be able to boot successfully. It bootloops into TWRP.
Click to expand...
Click to collapse
Hey, I'm success root my mi 8 pro (Android 9 V10.2.1.0.PECMIXM - MIUI 10)
If you know how to use TWRP, now just reboot your mi 8 pro to TWRP
and then choose Mount > check system & vendor.
Then flash the Latest Version of magisk (v18.1)
REMEMBER : TO MOUNT >> CHECK SYSTEM & VENDOR. AFTER THAT JUST FLASH MAGISK. ONLY MAGISK !!!
And then reboot to your system.
After that, download the latest versio of Magisk Manager, install it and open it.
And BOOOOM~
Your Mi 8 Pro just rooted.
nfadrizp said:
Hey, I'm success root my mi 8 pro (Android 9 V10.2.1.0.PECMIXM - MIUI 10)
If you know how to use TWRP, now just reboot your mi 8 pro to TWRP
and then choose Mount > check system & vendor.
Then flash the Latest Version of magisk (v18.1)
REMEMBER : TO MOUNT >> CHECK SYSTEM & VENDOR. AFTER THAT JUST FLASH MAGISK. ONLY MAGISK !!!
And then reboot to your system.
After that, download the latest versio of Magisk Manager, install it and open it.
And BOOOOM~
Your Mi 8 Pro just rooted.
Click to expand...
Click to collapse
I rooted firsr u
nd now i am using mi mix 3 ???
To all the impatient... The first android 11 build of miui for
Mi 9T/Redmi K20 is here!
Note :
-This is a China Beta Rom
What it means that it have no gApps and a lot of bloatware and only english and chinese and maybe some 5 other language
If you would like to install the more global version wait for xiaomi.eu maybe Thursday or friday they will release their version
-Also don't forget to flash the latest TWRP supporting android 11
Flash at your own risk ?
================================
Redmi K20 / Mi 9T Android 11 First Build (China Beta V20.10.20)
Download :
http://bigota.d.miui.com/20.10.20/miui_DAVINCI_20.10.20_b436860943_11.0.zip
Next Weekly ROM by xiaomi.eu will be 20.10.22, released thursday (or friday if delayed by Xiaomi).
as soon as the .eu comes out I install
Enviado desde mi Mi 9T mediante Tapatalk
Micdu70 said:
Next Weekly ROM by xiaomi.eu will be 20.10.22, released thursday (or friday if delayed by Xiaomi).
Click to expand...
Click to collapse
Thanks for rectification ?
HumptyPotato47 said:
If i install china beta, i will get ota updates weekly ? Updates will work normally ?
Click to expand...
Click to collapse
Not certain about this but i think they support ota, maybe wait for xiaomi.eu if you really need ota?
If i have orangefox recovery and i wanna install xiaomi eu android 11 when it release this week, it's fine? Or need i to change recovery?
sidodz said:
To all the impatient... The first android 11 build of miui for
Mi 9T/Redmi K20 is here!
Note :
-This is a China Beta Rom
What it means that it have no gApps and a lot of bloatware and only english and chinese and maybe some 5 other language
If you would like to install the more global version wait for xiaomi.eu maybe Thursday or friday they will release their version
-Also don't forget to flash the latest TWRP supporting android 11
Flash at your own risk ?
================================
Redmi K20 / Mi 9T Android 11 First Build (China Beta V20.10.20)
Download :
http://bigota.d.miui.com/20.10.20/miui_DAVINCI_20.10.20_b436860943_11.0.zip
Click to expand...
Click to collapse
Official TWRP 3.4.0.0 or something else?
so, this means this phone will be get miui 13 and android 11 officially, right?
GabiML said:
If i have orangefox recovery and i wanna install xiaomi eu android 11 when it release this week, it's fine? Or need i to change recovery?
Click to expand...
Click to collapse
yy i try it with 10.0.2 and i boot up without any problem, but when you need flash back a10 rom you must wipe data / system before...
sidodz said:
To all the impatient... The first android 11 build of miui for
Mi 9T/Redmi K20 is here!
Note :
-This is a China Beta Rom
What it means that it have no gApps and a lot of bloatware and only english and chinese and maybe some 5 other language
If you would like to install the more global version wait for xiaomi.eu maybe Thursday or friday they will release their version
-Also don't forget to flash the latest TWRP supporting android 11
Flash at your own risk
================================
Redmi K20 / Mi 9T Android 11 First Build (China Beta V20.10.20)
Download :
http://bigota.d.miui.com/20.10.20/miui_DAVINCI_20.10.20_b436860943_11.0.zip
Click to expand...
Click to collapse
And what is the latest Twrp because nothing that i saw says it supports android 11 spesifically
HumptyPotato47 said:
Just download the latest official version which is 3.4.0.0
Click to expand...
Click to collapse
do i just flash the recovery because i had mauronofrio and orangefox right now
Soft Bricked
yes, had a soft brick. phone was only booting in to fastboot. so used the "XiaoMiTool v2" and recovered the phone with MIUI 12.0.3.0 and then downloded the ota update 12.0.5.0 and then updated to it via manual update. now not thinking of doing it again for a while , don't want to get the device bricked again.
mzan said:
yes, had a soft brick. phone was only booting in to fastboot. so used the "XiaoMiTool v2" and recovered the phone with MIUI 12.0.3.0 and then downloded the ota update 12.0.5.0 and then updated to it via manual update. now not thinking of doing it again for a while , don't want to get the device bricked again.
Click to expand...
Click to collapse
How did you get your phone bricked?
By installing this update?
If yes did you use the latest twrp 3.4.0.0?
Did you wipe data/system before doing this?
Please give more detail so other users doesn't brick their devices
sidodz said:
How did you get your phone bricked?
By installing this update?
If yes did you use the latest twrp 3.4.0.0?
Did you wipe data/system before doing this?
Please give more detail so other users doesn't brick their devices
Click to expand...
Click to collapse
TWRP - Latest = Yes
Wipe - data/system = Yes
1) adb reboot fastboot
2) fastboot flash recovery twrp3.4.0.0....
3) fastboot reboot
4) held volume+ n Power
5) TWRP came
6) advance wipe - dalvik cache/system/data/cache
7) back to main menue
8) install - select storage - OTG
9) taped on the zip, slide to flash..
Everything went well successful.
10) reboot system -- came to fastboot, repeated the same step still fastboot
Please correct me if I've done anything wrong, this is the usual step I did to flash V12.xxx earlier.
Used XiaoMiTool V2 and recovered to 12.0.3.0.. and OTA update to 12.0.5.0..
mzan said:
TWRP - Latest = Yes
6) advance wipe - dalvik cache/system/data/cache
Please correct me if I've done anything wrong, this is the usual step I did to flash V12.xxx earlier.
Used XiaoMiTool V2 and recovered to 12.0.3.0.. and OTA update to 12.0.5.0..
Click to expand...
Click to collapse
I think you should've formatted data, then after a reboot wipe.
HumptyPotato47 said:
xiaomi.eu version finally released.
https://sourceforge.net/projects/xi...iles/xiaomi.eu/MIUI-WEEKLY-RELEASES/20.10.22/
Click to expand...
Click to collapse
do you know if i need to clean install this weekly?
I just did the clean install.
so far everything ok!
mzan said:
TWRP - Latest = Yes
Wipe - data/system = Yes
1) adb reboot fastboot
2) fastboot flash recovery twrp3.4.0.0....
3) fastboot reboot
4) held volume+ n Power
5) TWRP came
6) advance wipe - dalvik cache/system/data/cache
7) back to main menue
8) install - select storage - OTG
9) taped on the zip, slide to flash..
Everything went well successful.
10) reboot system -- came to fastboot, repeated the same step still fastboot
Please correct me if I've done anything wrong, this is the usual step I did to flash V12.xxx earlier.
Used XiaoMiTool V2 and recovered to 12.0.3.0.. and OTA update to 12.0.5.0..
Click to expand...
Click to collapse
I think unlike previous iterations, we don't wipe system partition with these Roms as long as the vendor is same. (Means, If within MIUI Roms, no need. likewise with others such as AOSP)
strokesbr said:
I just did the clean install.
so far everything ok!
Click to expand...
Click to collapse
please mention the steps as for a rookie. pls
Thank You,
mzan said:
please mention the steps as for a rookie. pls
Thank You,
Click to expand...
Click to collapse
If your boot-loader is unlocked and have twrp, just FORMAT DATA, cache & Dalvik and flash the A11 Weekly Rom. Clean installation means formatting DATA partition and setting up as new.
I'm on weekly 20.09.17 and will be flashing the latest A11 weekly end of the day after work.
Edit: When you format DATA, your internal storage too would be wiped. So Make sure you have a PC (To mount twrp and copy the file) or OTG to push the Rom file to internal storage after formatting data.
manosath said:
And what is the latest Twrp because nothing that i saw says it supports android 11 spesifically
Click to expand...
Click to collapse
https://t.me/randomdavinci/33877
there is no forums for redmi 10
San2005 said:
there is no forums for redmi 10
Click to expand...
Click to collapse
Is that your phone?
[Tutorial] Xiaomi Redmi 10 [Selene] Custom Rom Installation Method [All Error Fixed].
You Want Video turorial ? Cheack This Out;- https://forum.xda-developers.com/t/xiaomi-redmi-10-redmi-10-prime-redmi-10-2022-redmi-10-2021-selene-custom-rom-installation-video-tutorial.4583503/ Tutorial Install Custom rom Selene Requirements ...
forum.xda-developers.com
joke19 said:
Is that your phone?
[Tutorial] Xiaomi Redmi 10 [Selene] Custom Rom Installation Method [All Error Fixed].
You Want Video turorial ? Cheack This Out;- https://forum.xda-developers.com/t/xiaomi-redmi-10-redmi-10-prime-redmi-10-2022-redmi-10-2021-selene-custom-rom-installation-video-tutorial.4583503/ Tutorial Install Custom rom Selene Requirements ...
forum.xda-developers.com
Click to expand...
Click to collapse
yeah but it's for miui 12 and i have miui 13 does updating software remove twrp
San2005 said:
yeah but it's for miui 12 and i have miui 13 does updating software remove twrp
Click to expand...
Click to collapse
How did you get miui 13 mine is stuck on 12.5 and i have some bugs that might get solved with a update.
Try this it is working in Xiaomi redmi 10 Selene in miui 13
fastboot flash boot [name of the file twrp].img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot recovery
copy stock boot.img to sdcard or internal and flash it on boot category in twrp
select advanced menu > select install curent twrp
install magisk.zip if you want
Reboot system
If you have any question don't hesitate and go in my direct message, excuse me for my Bad english :/
alan7283 said:
Try this it is working in Xiaomi redmi 10 Selene in miui 13
fastboot flash boot twrp13.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot recovery
copy stock boot.img to sdcard or internal and flash it on boot category in twrp
select advanced menu > select install curent twrp
Reboot system
If you prefer orange fox recovery, go in the twrp, flash boot-orangefox.img in the recovery and reboot !
If you have any question don't hesitate and go in my direct message, excuse me for my Bad english
Click to expand...
Click to collapse
You got MIUI 13 ?
Yes
alan7283 said:
Yes
Click to expand...
Click to collapse
Howw ??? OTA ?
No, the update was proposed to me by itself when I was on miui 12.5, however you can always flash it via fastboot, I can make you a tutorial if you want
alan7283 said:
No, the update was proposed to me by itself when I was on miui 12.5, however you can always flash it via fastboot, I can make you a tutorial if you want
Click to expand...
Click to collapse
I would love too but won't I lose warranty?
dda7lite said:
I would love too but won't I lose warranty?
Click to expand...
Click to collapse
Yes but if you relock your bootloader you can get your warranty back so don't worry about it
alan7283 said:
Yes but if you relock your bootloader you can get your warranty back so don't worry about it
Click to expand...
Click to collapse
Your sure? because I can't lose my 3 year warranty
Yes, I'm sure don't worry, but if you flash a rom via fastboot, you lose all the data of the phone, do you accept that?
alan7283 said:
Yes, I'm sure don't worry, but if you flash a rom via fastboot, you lose all the data of the phone, do you accept that?
Click to expand...
Click to collapse
Yeah and I will probably not flash it today I might sent it to warranty first because it's giving me a really weird problem
What problem?
alan7283 said:
What problem?
Click to expand...
Click to collapse
When I plug in charger phone immediately becomes unresponsive, touch stops and won't turn on (only with fingerprint)
Oh okok, no worries probably a screen problem, feel free to come back to me when you are ready
alan7283 said:
Oh okok, no worries probably a screen problem, feel free to come back to me when you are ready
Click to expand...
Click to collapse
You can write the tutorial if you want and I'll save it
dda7lite said:
You can write the tutorial if you want and I'll save it
Click to expand...
Click to collapse
Ok, first you have to unlock the bootloader:
Step 1: Download this file and unzip it. https://androidfilehost.com/?fid=7161016148664849473
Once you have unzipped it, go to the mediatekbootloaderunlock folder and go to the drivers folder, right click on the file "cdc-acm.inf" and then click on install
https://www.technobuzz.net/wp-content/uploads/2022/01/Install-MTK-driver.jpg
Once this is done, go back and install usbdk (x64 for 64 bit OS, x86 for 32 bit OS) on your PC).
https://www.technobuzz.net/wp-content/uploads/2022/01/Instal-USB-drivers-1024x450.jpg
Once this is done, restart your computer (important)
Turn off your redmi 10
In the mediatekbootloaderunlock folder open the "UnlockBootloader.bat" file
Once the file is open, press the volume + and volume - at the same time and once this is done, connect the cable to your PC.
Wait until the window closes.
Your bootloader is now unlocked.
Now that the bootloader of the phone has been unlocked, we will flash the new phone rom.
Step 2: Download the phone rom from this site: https://miuirom.org/phones/redmi-10
(I advise you the Indonesian region)
Once the rom has been downloaded, the rom file ends in .tgz, unzip the rom with WinRAR or any other unzipping tool.
WinRAR
WinRAR - the data compression, encryption and archiving tool for Windows that opens RAR and ZIP files. Compatible with many other file formats.
www.win-rar.com
Once the rom has been decompressed, download Mi Flash tool on this link:
MiFlash20200314
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Unzip the zip file and open the file miflashtool.exe
Once opened, put your phone in fastboot mode (power + volume -)
Connect the phone with a cable to the PC
Click on refresh, the phone should appear.
Then click on select and select the unzipped rom you made earlier.
At the bottom of mi flash tool, click on clean all and lock, this will delete all data and close the bootloader.
Once this is done, click on flash and wait for it to finish.
If you get an error like: checkpoint is not done fastboot lock or something like that, don't worry, it means it worked.
You now have miui 13, enjoy.
alan7283 said:
Ok, first you have to unlock the bootloader:
Step 1: Download this file and unzip it. https://androidfilehost.com/?fid=7161016148664849473
Once you have unzipped it, go to the mediatekbootloaderunlock folder and go to the drivers folder, right click on the file "cdc-acm.inf" and then click on install
https://www.technobuzz.net/wp-content/uploads/2022/01/Install-MTK-driver.jpg
Once this is done, go back and install usbdk (x64 for 64 bit OS, x86 for 32 bit OS) on your PC).
https://www.technobuzz.net/wp-content/uploads/2022/01/Instal-USB-drivers-1024x450.jpg
Once this is done, restart your computer (important)
Turn off your redmi 10
In the mediatekbootloaderunlock folder open the "UnlockBootloader.bat" file
Once the file is open, press the volume + and volume - at the same time and once this is done, connect the cable to your PC.
Wait until the window closes.
Your bootloader is now unlocked.
Now that the bootloader of the phone has been unlocked, we will flash the new phone rom.
Step 2: Download the phone rom from this site: https://miuirom.org/phones/redmi-10
(I advise you the Indonesian region)
Once the rom has been downloaded, the rom file ends in .tgz, unzip the rom with WinRAR or any other unzipping tool.
WinRAR
WinRAR - the data compression, encryption and archiving tool for Windows that opens RAR and ZIP files. Compatible with many other file formats.
www.win-rar.com
Once the rom has been decompressed, download Mi Flash tool on this link:
MiFlash20200314
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
Unzip the zip file and open the file miflashtool.exe
Once opened, put your phone in fastboot mode (power + volume -)
Connect the phone with a cable to the PC
Click on refresh, the phone should appear.
Then click on select and select the unzipped rom you made earlier.
At the bottom of mi flash tool, click on clean all and lock, this will delete all data and close the bootloader.
Once this is done, click on flash and wait for it to finish.
If you get an error like: checkpoint is not done fastboot lock or something like that, don't worry, it means it worked.
You now have miui 13, enjoy.
Click to expand...
Click to collapse
I have 2 questions does it work on Redmi 10 2022 and don't it get Bricked if I lock bootloader with other region ?