Related
If I am running a deodex rom, that is sense 3.0, can I flash customizations such as a transparent Rosie or custom lock screen from a diffrent deodex rom?
Should be able to without a problem unless its states on the mod thread its only compatible with certain roms. But always make a nand before flashing any mods for a safety net incase anything does get mixed up or just to revert if you wanted to.
Locked & Loaded
" Shooter on Deck "
Ilovemywife said:
If I am running a deodex rom, that is sense 3.0, can I flash customizations such as a transparent Rosie or custom lock screen from a diffrent deodex rom?
Click to expand...
Click to collapse
the suggestions in the first post reply are great.
in addition here are a few thoughts which came to mind: different mods are done on different files in the android system. two mods might change the same file or two mods might change different files. if the two mods both change the same file, swapping that file in and out means you'll only get one or the other version of it modded but might have to find a version of that file with both mods performed on it.
ideal beginner solution would be to at least open up the .zip file which contains the mod and check with file is being replaced on your system. it'll give you a good starting point to gauge from as the more mods you flash the more you'll see which files are being modified.
ideal advanced solution would be to understand how the file was modified and perform the modification yourself .. this takes more time and labor but leads to the greatest control over your system. if you're interested in this route, SteelH has a great list of [HOW-TO] guides in the EVO 3D themes & apps board which detail out the exact place to change code in order to accomplish the mod.
hope that helps!
Looking to find a patch that would allow me to see the true 1X/3G icon appear. Running a rooted stock ROM. I saw the Alien ROM includes a fix but there has been no DEV support or updates so I would like to try and maintain stock with the fix. I would attempt this myself but have no idea where to start.
I'm pretty sure that it is just a graphics edit, ie. replaced images. The images are probably in /system/framework-res.apk. Just unpack that, put the images from Alien ROM in there, and then pack it up again and push it to your phone.
I'll try it, thank you!
Rom All in 1
This modified stock is for P768 and P778
but you can install on P760 and P765 [Installing Fix Camare]
View attachment 2937128
Features
Removed bloatware
Deodexed
Zipaling
Root
Recovery CWM
Busybox
.................................................. .................................................. ..........
Swap memories [microsd is the internal]
USB mass storage
Removed autorun.exe
.................................................. .................................................. ...........
Pure Graphic
AC!D Audio
AdBloc [hosts]
Tweaks [Build]
lge-res modified support xblastool [change color from settings]
-----------------------------------------------------------------------------------------
StatusBar Style G3
Mods zip for statusbar [you canput clock center, carrier or both in statusbar]
Quick Button [optional zip flash]
Bootanimation Android L
Loockscreen LG G
File Manger G2
Keyboard Android L
Wallpapers of the G3 [launcher and lockscreen]
Theme G3 for launcher stock
Widget Music Player G2
more change in interface
-----------------------------------------------------------------------------------------
I am not responsible for bricked devices or dead SD cards
Instalation
You will need recovery menu
Please before back up your ROM
Move the downloaded files to externalSD
Reboot to recovery
Wipe data/factory reset
Advance/Wipe dalvik cache
Install zip from sdcard
Chose zip from externa
Flash ROM [if the installation is very fast, re-flash the rom zip]
Flash fixes (if you need)
Flash bonus like quickbutton or clackcenter etc [if you want]
Mounts and Storage/[format sdcard],[format data and data media sdcard]
if it is not any of the above you select format data
Reboot
The most important thing to remember is don't select yes - disable recovery flash
when selecting reboot system because you have conflicts in gallery or screenshots, then selects "no" or "go back"
Bonus advanced configuration
theme materia keyboard Android L
Go to settings/languaje & input/click on the gear[google keyboard]/advanced settings/color scheme/material
Toggles transparent and statusbar [transparent statusbar not working in launcher stock]
You need have xposed framework and xblast tools
go to xblastools/statusbar/enable statusbar background color/click on black box
put on Hex: #01000000 and select tick ✓
press on color to aplpy changes [rigth side]
reboot system
done!
lge-res modified
You need have xposed framework and xblast tools
go to xblast tools/visual tweaks/holo theme/ligth theme/
in this section you can change the font color
only tick de option primary text color, secundary text color, etc and select your favorite color
to change color or put image in setting, in this same section, go to
enable holo holo ligth background
now you select
Holo ligth background color for change color for the setting
Holo ligth background image for put a picture in setting
reboot system
done!
Stock Rom All in 1 v2
http://www.mediafire.com/download/h2fu9ez6m5vyhw9/Stock_Rom_All_in_1_v2.zip
Fix camara P760
http://www.mediafire.com/download/yo92927tt9bntyq/Fix_P760_All_in_1.zip
Fix camara P765
http://www.mediafire.com/download/iz3eyah5x9fzlq4/Fix_P765_All_in_1.zip
Extra... disable swap memories
http://www.mediafire.com/?74u4ada7w68pej4
__________________________________________________________________
Mods for StatusBar
[All mods include the new statusbar style G3]
includes folder Enable Quick Button/QucikButton+Carrier/QucikButton+ClockCenter/or all mods
https://www.mediafire.com/folder/8h4syeor881cs/enable.quick.button+mods.[all.in.1]
includes folder Disable Quick Button/Carrier/ClockCenter or Both
https://www.mediafire.com/folder/lpbntd5h3vc77/disable.quick.button+mods.[all.in.1]
Review + Instalation Rom All in 1 [Spanish I´m from Mexico]
https://www.youtube.com/watch?v=JIzPU6ChYiE
mateo1111 - script usb mass storage
Isael Joanne - lge-res.apk modified
Artas - recovery cwm
kuma82 - zip transparent
Pollos - files for kitchen
Lgeob - files quick button
xda developers
would this work on US, locked bootloader lgms p769?
and if so, would tethering hot-spot work?
Thanks again for your work Miguel ...
I ran into a problem, whatsapp isn't saving media or backups. I think its looking for /storage/sdcard0/external_sd/WhatsApp but there is no external_sd folder. That isn't even a folder, its a link, right? Thats how it used to be on the previous rom i used.
I still have the external_sd link in storage/external_SD, but i need this link in sdcard0, i think. I tried to create it but i can't write to sdcard0!
How can i solve this? I think i restored whatsapp from titanium backup, that could be the problem?
Hi see if the swap memories is made? Look in file manager... If not done reinstall the rom whitout wipes (remember don't select yes disable recovery when you exit the recovery)
Sent from my LG-P760 using XDA Free mobile app
miguel-rocha- said:
Hi see if the swap memories is made? Look in file manager... If not done reinstall the rom whitout wipes (remember don't select yes disable recovery when you exit the recovery)
Sent from my LG-P760 using XDA Free mobile app
Click to expand...
Click to collapse
It did.
Looks like i fixed it with "fix permissions" in clockworkmod advanced settings. Now i can write to both sdcard0 and external_SD!
Can't download fix camera p765, can you upload to another site? Also mod for status bar, i cant download it..
miguel-rocha- said:
Hi see if the swap memories is made? Look in file manager... If not done reinstall the rom whitout wipes (remember don't select yes disable recovery when you exit the recovery)
Sent from my LG-P760 using XDA Free mobile app
Click to expand...
Click to collapse
I had the same problem again today, after a couple of reboots it fixed itself. Could Android be mounting the sdcard as read-only? I tried running chkdsk on windows but it didn't find any errors.
many questions
I've flash 3 time and then after installing xposed It start's giving me UI Sistem errors or something like that I've been follow your instructions step by stem on your youtube video But it did't work
What's going on?
alexreyes said:
I've flash 3 time and then after installing xposed It start's giving me UI Sistem errors or something like that I've been follow your instructions step by stem on your youtube video But it did't work
What's going on?
Click to expand...
Click to collapse
hi you installed some mod.zip for status bar? or the case with the original statusbar of the rom?
miguel-rocha- said:
hi you installed some mod.zip for status bar? or the case with the original statusbar of the rom?
Click to expand...
Click to collapse
I Just Instaled the rom plus the 2 apps of xpossed
The only thing I did diferent of your videos is to keep the G3 Theme but i gues is not the problem
I was so careful of follow step by step your instructions
I have boatloader unlocked I was root everithing as it's expected to be
I flashed with cwm recovery
I don't know what's going wrong
I'm also a Telcel user with a p768g just like you
Problems with Camera
Hi,
I have tested this ROM and everything is working fine except camera. I get unexpected force closing error.
I have #768 model & unlocked BL. Any idea?
Full reintsall of the rom
Sent from my LG-P760 using XDA Free mobile app
miguel-rocha- said:
Full reintsall of the rom
Sent from my LG-P760 using XDA Free mobile app
Click to expand...
Click to collapse
Ok, perfect, reinstalled formatting /system and Camera is working again [emoji1]
pvisa1 said:
Ok, perfect, reinstalled formatting /system and Camera is working again [emoji1]
Click to expand...
Click to collapse
excellent :good:
miguel-rocha- said:
excellent :good:
Click to expand...
Click to collapse
thanks miguel for great rom,everything works fine but data connection is not working and also data connection is showing connected always.Dont know what's problem going on?.Please check it.My mobile is L9 p765.
@Miguel-rocha can you disable sdcard emulation instead of swapping cards ?
check minibean rom by waldo93,
it needs edit boot.img and framework
Code:
> The Hard One
You can disable any roms if you have understand this
Part 1
1. You need boot.img from the rom that you want to disable
2. Download this http://d-h.st/L6t
3. Note++ program or any .txt program
Part 2
> Unpack those boot.img
> Open fstab.u2 with .txt program then compare it, make it same like my fstab.u2
> Open init.u2.rc, and do the same thing
> Repack boot.img
Part 3
> Decompile both of framework
> Replace the original storage-list.xml
> Then recompile
Repack the zip with your new framework and boot.img, then flash it
This Rom is Kit Kat or Lollipop?
null
marciofornari said:
This Rom is Kit Kat or Lollipop?
Click to expand...
Click to collapse
4.1.2 JellyBean
Thought i'd make flashable zip to enable or disable the nav bar.
You don't need to search into the build.prop and change values...the zip does it for you
Working on : A2017X
It's scanning for those "lines" and replaces them with the proper ones. The scripts makes a build.prop backup itself just in case
Don't know if it works on U or CN. As this zip is fairly harmless someone can test, but out of experience the U and CN(don't know for sure) models are stubborn on removing or adding the nav bar...
INSTALL:
1. Download A2017G navbar remover or A2017G navbar enabler EDIT : or the aroma A2017G NavBar Df!nR
2. Put zip into root extSD ( or intSD )
3. Boot into TWRP
4. Install
5. Reboot & Done !
You'll always be able to revert. No worries.
edit 02.12.2018 : also look here as to a complementary method
E N J O Y !
REALLY JUST FOR FUN
I made an aroma installer for the 2 of them. So just choose the one you want
LINK : A2017G Nav Bar Df!nR
^ @ rayster, funny thing you released this mod, it was me who recently opened a forum asking how to remove/hide the navigation bar.
I am still waiting for my Axon to arrive, still unsure what version it is. All I know is I got an sms message saying the package is out for delivery.
Then I'll run the toolkit to unlock the bootloader, gain root and recovery. Finally I will be able to flash your rom.
kanej2006 said:
^ @ rayster, funny thing you released this mod, it was me who recently opened a forum asking how to remove/hide the navigation bar.
I am still waiting for my Axon to arrive, still unsure what version it is. All I know is I got an sms message saying the package is out for delivery.
Then I'll run the toolkit to unlock the bootloader, gain root and recovery. Finally I will be able to flash your rom.
Click to expand...
Click to collapse
Yeah, that day was navbar-day. Thought i made just a flashable zip for it as a sort of excercise. It's just for fun you know
Perhaps today is D-day, right ?
raystef66 said:
Yeah, that day was navbar-day. Thought i made just a flashable zip for it as a sort of excercise. It's just for fun you know
Perhaps today is D-day, right ?
Click to expand...
Click to collapse
Yes, phone received. I got the European G version. I have been trying to unlock the bootloader via the toolkit but keeps failing. I will try manually to unlock the bootloader. Keep getting EDL device is not connected! error.
Does this works on Oreo B01 or B12?
ramnkc said:
Does this works on Oreo B01 or B12?
Click to expand...
Click to collapse
It does. On some it doesn't. Try it. It's harmless and sets 2 values in build.prop.
raystef66 said:
It does. On some it doesn't. Try it. It's harmless and sets 2 values in build.prop.
Click to expand...
Click to collapse
Just flashed and its working!
One more question.... How to make nav bar translucent or transparent background all the time?
Works on U model
Thank you worked on alot of roms!
raystef66 said:
Thought i'd make flashable zip to enable or disable the nav bar.
You don't need to search into the build.prop and change values...the zip does it for you
Working on : A2017X
It's scanning for those "lines" and replaces them with the proper ones. The scripts makes a build.prop backup itself just in case
Don't know if it works on U or CN. As this zip is fairly harmless someone can test, but out of experience the U and CN(don't know for sure) models are stubborn on removing or adding the nav bar...
INSTALL:
1. Download A2017G navbar remover or A2017G navbar enabler EDIT : or the aroma A2017G NavBar Df!nR
2. Put zip into root extSD ( or intSD )
3. Boot into TWRP
4. Install
5. Reboot & Done !
You'll always be able to revert. No worries.
edit 02.12.2018 : also look here as to a complementary method
E N J O Y !
Click to expand...
Click to collapse
Do you have this navigation bar zip file?
Does anyone have this navigation bar zip file?
I found the file where boot animation is stored on the pixel 4a. It's not under system/media it's in product/media. None of the boot animation apps work. And the magisk module for changing animation doesn't seem to work on my device. When I try to physically put a new bootanimation.zip in /product/media it won't let me says my root directory is 100% full. I always like using a custom animation. Does anyone have any ideas how to get this done?
floydster1708 said:
I found the file where boot animation is stored on the pixel 4a. It's not under system/media it's in product/media. None of the boot animation apps work. And the magisk module for changing animation doesn't seem to work on my device. When I try to physically put a new bootanimation.zip in /product/media it won't let me says my root directory is 100% full. I always like using a custom animation. Does anyone have any ideas how to get this done?
Click to expand...
Click to collapse
So far I'm thinking adb terminal and push file to folder root file managers will not let with the way android 11 is ,haven't tested it
floydster1708 said:
I found the file where boot animation is stored on the pixel 4a. It's not under system/media it's in product/media. None of the boot animation apps work. And the magisk module for changing animation doesn't seem to work on my device. When I try to physically put a new bootanimation.zip in /product/media it won't let me says my root directory is 100% full. I always like using a custom animation. Does anyone have any ideas how to get this done?
Click to expand...
Click to collapse
I have looked into this quickly. I created a magisk module to replace my boot animation but it failed. The internal format of the actual ZIP file is different to previous versions of android.
As for directly changing the file, I have only got this phone recently, but from my understanding, newer devices can not nount their system partitions as RW, so Magisk will be the only way.
When I get a chance, I will be converting my old boot animation to mimic the new format, and give that a go. If that works, I will be including/updating my app TeMeFI to be capable for my/our device.
DiamondJohn said:
I have looked into this quickly. I created a magisk module to replace my boot animation but it failed. The internal format of the actual ZIP file is different to previous versions of android.
As for directly changing the file, I have only got this phone recently, but from my understanding, newer devices can not nount their system partitions as RW, so Magisk will be the only way.
When I get a chance, I will be converting my old boot animation to mimic the new format, and give that a go. If that works, I will be including/updating my app TeMeFI to be capable for my/our device.
Click to expand...
Click to collapse
The magisk module failed for me as well. If you do end up figuring it out would greatly appreciate your insight.
yeah im extremely interested in a solution to this.
it used to be so so so much easier to change the boot animation and boot logo etc. these newer phones are crazy locked down.
I looked into this also a few weeks ago now. I havent tried the latest magisk, and I know previously on an older magisk in oreo, it would play half the original animation then switch to the new one. Super weird. So, maybe if its brought to @topjohns attention (in giothub I think), it could get a fix.
On my previous Oreo phone, I had created a working boot animation change, so I thought it would be a simple task to do the same for A11. Not so... It didn't work. And yes, I noticed the changed location, and also converted the zip file to the new format
So, the weird thing, which kind of confirmed I was probably doing it correctly is that I had a crash which caused a soft-reboot, and on that reboot, the replaced boot animation worked! But, onnay cold boot, it failed and played the normalone. Also, if I went into /product/media on a live system and tried opening (either zip), they would be my replacement boot animation.
DiamondJohn said:
on an older magisk in oreo, it would play half the original animation then switch to the new one.
Click to expand...
Click to collapse
Magisk loads after userdata is mounted so you get the stock anim until then. I have modified system directly but the anim still "plays" twice. Not this phone, not android 11.
a1291762 said:
Magisk loads after userdata is mounted so you get the stock anim until then. I have modified system directly but the anim still "plays" twice. Not this phone, not android 11.
Click to expand...
Click to collapse
You are not understanding.In Oreo, the changed boot animation plays from start to finish. It worked perfectly.
You do not need to modify the system location directly on Oreo.
DiamondJohn said:
You are not understanding.In Oreo, the changed boot animation plays from start to finish. It worked perfectly.
Click to expand...
Click to collapse
Well you did mention half old, half new?
Before I had this phone, I had a Mi A2 Lite and it played the boot animation twice. Once before userdata was mounted (but not to the end), then again once userdata was mounted. Magisk modules could affect the second one but not the first (since Magisk files live on the userdata partition). I only really ran Android 9 and 10 on that phone, and they both did it.
I suppose the system could have just left the static splash on the screen until userdata was mounted, but for whatever reason, that's now what my old phone did.
I haven't actually watched the Pixel booting closely enough to spot if it's doing the same thing or not
Back to the issue at hand...
I have a read-only device /dev/block/dm-2 mounted at /product but I also see something Magisk-related mounting a directory called product but the path is ... whack.
/dev/B9z84Wq/.magisk/block/product on /dev/B9z84Wq/.magisk/mirror/product type ext4 (ro,seclabel,relatime)
dm-0 is /
dm-1 is /vendor
dm-2 is /product
dm-3 is /system_ext
All of these are (apparently) ext4. Probably these are all "files" on the super partition (ie. the new dynamic partitioning). That Magisk thing makes me think a module should be able to replace files in there... but maybe the bootanimation.zip is loaded before Magisk gets a chance to do that?
a1291762 said:
Well you did mention half old, half new?
Click to expand...
Click to collapse
But if you read that post, I also explicitly say it was an old magisk. A newer version of Magisk changed that, and it played the new one from start to finish.
a1291762 said:
Back to the issue at hand...
I have a read-only device /dev/block/dm-2 mounted at /product but I also see something Magisk-related mounting a directory called product but the path is ... whack.
/dev/B9z84Wq/.magisk/block/product on /dev/B9z84Wq/.magisk/mirror/product type ext4 (ro,seclabel,relatime)
dm-0 is /
dm-1 is /vendor
dm-2 is /product
dm-3 is /system_ext
All of these are (apparently) ext4. Probably these are all "files" on the super partition (ie. the new dynamic partitioning). That Magisk thing makes me think a module should be able to replace files in there... but maybe the bootanimation.zip is loaded before Magisk gets a chance to do that?
Click to expand...
Click to collapse
I didnt check to see if there were other locations. I only replceased /product/* and /system/product/* Although I dont hold much hope, I will check to see if there are other partitions I could replace it into.
I'm on derpfest a11. The first time I boot after flashing I get the derpfest boot animation (a colorful flashing owl) any time after that first boot it shows the Google logo then just the words android screen goes black then the word android again. I know this isn't a derp thread I just thought it was weird that the custom boot logo shows on first boot but not after that. When I check /product/media it's the derp-bootanimation so not even sure where the android logo is being loaded from.
Looking at the zips of the files in product/media, the files are different from normal boot-animation zips. The desc file is different, and there trim.txt files in the part folders. I haven't played with it yet, but would be nice to change change the G one.
floydster1708 said:
I'm on derpfest a11. The first time I boot after flashing I get the derpfest boot animation (a colorful flashing owl) any time after that first boot it shows the Google logo then just the words android screen goes black then the word android again. I know this isn't a derp thread I just thought it was weird that the custom boot logo shows on first boot but not after that. When I check /product/media it's the derp-bootanimation so not even sure where the android logo is being loaded from.
Click to expand...
Click to collapse
tcat007 said:
Looking at the zips of the files in product/media, the files are different from normal boot-animation zips. The desc file is different, and there trim.txt files in the part folders. I haven't played with it yet, but would be nice to change change the G one.
Click to expand...
Click to collapse
I have managed to change the boot logo of the stock A11 firmware, I dont have time to get into it too far right now (im on my way ... socially distanced ... out)
1. I modified the bootanimation.zip to match the new format (dont know if the old format works)
2. manually created a magisc module to replace the one in the ROM
3. Added a boot script to do a soft reboot on each start-up/boot. It appears Magisc does not replace the file soon enough, so the old one plays. even though it appears changed in the running OS, obviously after the ORIGINAL had played.; which I coud not find in the ROM But there is 1 second of "Google" before my animation plays.
I also added a step to blur any area below the quick tiles, and also a few other places, such as in the reboot screen
see
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
DiamondJohn said:
I have managed to change the boot logo of the stock A11 firmware, I dont have time to get into it too far right now (im on my way ... socially distanced ... out)
1. I modified the bootanimation.zip to match the new format (dont know if the old format works)
2. manually created a magisc module to replace the one in the ROM
3. Added a boot script to do a soft reboot on each start-up/boot. It appears Magisc does not replace the file soon enough, so the old one plays. even though it appears changed in the running OS, obviously after the ORIGINAL had played.; which I coud not find in the ROM But there is 1 second of "Google" before my animation plays.
I also added a step to blur any area below the quick tiles, and also a few other places, such as in the reboot screen
see
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
Click to expand...
Click to collapse
Hey thanks a lot for this man. I test it out on my device when I have time.
tcat007 said:
Looking at the zips of the files in product/media, the files are different from normal boot-animation zips. The desc file is different, and there trim.txt files in the part folders. I haven't played with it yet, but would be nice to change change the G one.
Click to expand...
Click to collapse
The following is the format docs. But in itself, the location isn't correct. I personally reversed engineered the existing one using my pre-loved boot animation, and then found this doco.
bootanimation format
It also implies sound is supported.
I added my one as an example that works. its the Nexus prime boot animation. But mine plays faster and for a shorter time.
I used to make boot animation for my device, it worked fine on A10(custom rom) but on certain builds it had the same problem as yours like not enough storage or similar error I don't recall but just found out this post and tried the old files I made and working fine on A11(custom rom)
It's a bit large for a boot animation but it's so because of the gradient colours and full resolution compression of the original video file makes the quality worse. Still give it a try if the format works.
Use mixplorer with root and first copy and backup the existing files and then give this file a try. rename the file after pasting in the correct directory. refresh if it shows no files renamed
https://sourceforge.net/projects/drg-custom-bootanimation/files/NokiaX6_gradient%281080x2280%29bootanimation.zip/download
D-Mi said:
Use mixplorer with root and first copy and backup the existing files and then give this file a try. rename the file after pasting in the correct directory. refresh if it shows no files renamed
Click to expand...
Click to collapse
We have RO system partitions. You have to use Magisk module to replace it,and have a system UI restart during boot, to enable ir.
DiamondJohn said:
We have RO system partitions. You have to use Magisk module to replace it,and have a system UI restart during boot, to enable ir.
Click to expand...
Click to collapse
How to do it .. please explain ..... Everytime i try to edit my bootanimation it says that system ro something ... And the magisk module of boot animation isn't working for me i have OnePlus 7t stock rom Android 11
vamp12 said:
How to do it .. please explain ..... Everytime i try to edit my bootanimation it says that system ro something ... And the magisk module of boot animation isn't working for me i have OnePlus 7t stock rom Android 11
Click to expand...
Click to collapse
the answer is in the post below. I had mine working, now I dont bother, so I would have to scan through my history (part of the reason since I have more pressing items to expend time on), and even then, it wouldn't be a drop in magisk module, but a manually built one..
DiamondJohn said:
We have RO system partitions. You have to use Magisk module to replace it,and have a system UI restart during boot, to enable ir.
Click to expand...
Click to collapse
Whats up guys, I am actually bringing questions that relate to this topic and not answers for now. Does Android Studio have a tool to access & modify the boot animation directories? Or even a tool from Android Studio that helps when taking on this task?