Hello XDA-Devs,
i bought a brand new Amazfit Pace (International) and updated firmware to latest stock. Setup was quite fine and watch paired with my Phone (Redmi Note 3 Pro) and Amazfit Watch App without any problems. I was also able to connect via MTP from Windows 10 PC and store some music on the watch.
Now i tried to connect my bluetooth headset (Bluetooth Bragi Dash Headphone) without any success. I put the Bragi Dash Headphone into pairing mode and in wacht BT menu it opens BT overview with blinking "Searching" indicator. After a while the blinking "Searching" indicator disappears and thats it. The Headphone does not show up. I also tried with a Bluetooth speaker with same result. Both, the Bragi Headphone and the bluetooth-speaker are working without any issues with my Phone, Windows tablets and other devices.
Any clue or same issue? Actually i like the design of the watch, but possibility to pair a bluetooth headset was a buying decision for me ..
thx and br
Arangato
1. Make sure the BT devices aren't paired with any other devices before trying to pair with watch;
2. If BT on watch is working fine, you should stay connect if you go away from your phone about 10m (without barriers), if connection drops 30-50cm from phone then maybe you have a problem with the watch's BT (weak connection due to bad antennae or BT chip);
3. Put phone and any other device around in Airplane mode (or switch other BT devices off), do the same to watch, then enable only BT and try to pair again. There are some known cases of WiFi/BT interference.
If everything fails, maybe the phone/speaker simply aren't compatible if they pair with other devices. Watch should be able to list other BT devices nearby, if the list is always empty, looks like BT is damaged. Try an unpair (reset) and pair again with another phone and/or account on Amazfit app. Good luck.
Hello lfom, thanks for fast reply. I did a factory reset and it still does not work with my Bragi Headphone (150€) (https://support.bragi.com/hc/en-us/articles/115000132569-The-Headphone-Technical-Specifications)
But one good news, i tried with a very cheap bluedio BT-Headset (9€) and surprisingly this headset i could directly connect to my Amazfit Pace watch and works fine...
... so it seems there is some general incompatibility... maybe related to BT 4.0 A2DP version. As you see here http://www.phonemore.com/xiaomi-amazfit/specs/3497 the Amazfit Pace should support BT 4.0 A2DP. I assume the Bragi Headphone does handle the protocolls correctly (had never any issues with them) and they are premium product... so unfortunately it seems we have to wait for fix fom Amazfit side.
Anyone else can report incompatible BT devices? Or maybe anyone else out there tried to connect a Bragi product?
Thx and br
Probably it cannot be fixed by Huami, as the the limitation is the hardware used in Pace (4.0BLE). I have read somewhere that Stratos uses a different BT chip and supports higher version, not sure if 4.1 or 4.2. There is a list of known compatible and incompatible devices in a Facebook group:
https://www.facebook.com/groups/HuamiAmazfit.Pace.Smartwarch/permalink/344737925947591/
Thx lfom, i joined the group and seems that Bragi The Headphone does not work in general (others report that too). Sad that a standard protocol like bluetooth still seems to have compatabiliy issues. Have to live with it and use different BT-headphone. Thx for your help
Hi... my Kaidi headset will not pair Amazfit as well. I can pair Amazfit with iPhone and can pair Kaidi headset with iPhone but never Amazfit with Kaidi. Sad...
Hi folks,
I bought a Honor 8X last week, and until now I'm very satisfied, except for one thing: Bluetooth stability.
I use Bluetooth earbuds and speakers on a daily basis, and on all 3 devices I use, I'm encountering regular drops and stutters during audio playback.
I'm using the same devices with my previous phone, a OnePlus 3T, and I didn't get those issues (well, not BT related issues, I had other ones with that phone )
I'm also regularly having troubles to connect to my Anker speaker.
Anyone else is having this issue?
I use BT headset most evenings watching TV etc no pertic brand just cheap ones and not noticed any issue also had my 8x a week nearly
Sent from my JSN-L21 using Tapatalk
I am facing same issue. Device paired but media audio and input device are disabled. Only showing device is paired
I don't have this issue, it's probably because of the software. If it's not solved with an update, then who knows what's causing the issue.
radhey1 said:
I am facing same issue. Device paired but media audio and input device are disabled. Only showing device is paired
Click to expand...
Click to collapse
I don't have this problem. It may be related to your bluetooth device. What is the bluetooth device you use?：○
bobo have a dream said:
I don't have this problem. It may be related to your bluetooth device. What is the bluetooth device you use?：○
Click to expand...
Click to collapse
Well, he said that the bleutooth device worked perfectly with OP 3T, my guess is that the current software of the 8X is the issue.
I fixed this by changing the bluetooth codec used in the developer settings.
1. Enable developer settings
2. Change the Bluetooth audio codec to SBC from aptX to SBC
doomware said:
Hi folks,
I bought a Honor 8X last week, and until now I'm very satisfied, except for one thing: Bluetooth stability.
I use Bluetooth earbuds and speakers on a daily basis, and on all 3 devices I use, I'm encountering regular drops and stutters during audio playback.
I'm using the same devices with my previous phone, a OnePlus 3T, and I didn't get those issues (well, not BT related issues, I had other ones with that phone )
I'm also regularly having troubles to connect to my Anker speaker.
Anyone else is having this issue?
Click to expand...
Click to collapse
What's your Bluetooth headset?Have you turned off WiFi for a try?
thecolour said:
I fixed this by changing the bluetooth codec used in the developer settings.
1. Enable developer settings
2. Change the Bluetooth audio codec to SBC from aptX to SBC
Click to expand...
Click to collapse
When I go to developer options, bt audio codec options are grayed out. Can't change anything...
honor 8x cannot find or detect sony wi c300 bluetooth headset...although honor is very good when using it...i am very satisfied but i only regret in terms of connecting bluetooth headset.
I have no issues with bluetooth, the range is better than my previous huawei P8 max and it doesn't randomly disconnect.
What case are you using? Metal bumpers may look cool but they kill bluetooth and cellullar signal.
Enviado desde mi ARE-AL00 mediante Tapatalk
Hi
I have the same problem and I'm happy to know I am not alone, on French websites I have not found this topic. So my bluetooth headsets are a model called Fozento, Version Bluetooth: V4.2.
And my speakers are Ultimate Ears Boom.
With both I have the same problem and that is very very annoying.
i have the same issue with my bluetooth devices (Bose, JBL)
Hi! I´ve got a weird Bluetooth problem, i hope someone could help. I´ts about data transfer. I tried to send some photos to my work PC from my new 8X. Did not work, it sends a few percent of the photo and then I get an error message "BluetoothStackserver crashed" or something like that. New, up to date PC with the newest drivers, Win 8.1 64 bit. Well, I tried with different other devices, Galaxy S9plus, Honor 7x, Note 10.1 2014, and even my old Surface Pro (also with 8.1 64 bit) it works with everything but my PC. (And my PC works also with all of them). I brought it home, added to my wife´s PC (older but high spec laptop) and also doesn´t work but this time without error messages. I tried to connect to her phone (some LG) also works perfectly. Sending, receiving. I literally tried everything, newest drivers, reboot, but nothing seems working. Any ideas? Thanks in advance!
Clamotte said:
i have the same issue with my bluetooth devices (Bose, JBL)
Click to expand...
Click to collapse
Same issue with mine. APTX stutters and is unusable. When I pair headphones that use APTX, I have to turn off APTX and revert to SBC to enjoy listening to music (which is an inferior codec). Something wrong with the software and APTX codec. Hope Honor fixes this in next update.
I am facing the exact problem with honor 8x. Usibg avantree tws 120 and Changing to sbc seems to disable the issue temporarily till i reconnect the buds and forget to revert to sbc as it automatically sets beack to aptx. Worth mentioning i have another galaxy phone which doesn't manifest the problem.
Dear All,
I have 2 phone which is pocophone f1 and vivo v11pro and i connect with xiaomi bluetooth headset original. But the problem when i hang up the call suddenly the i music from my vivo started to play the music. I connect the pocophone the first connection and vivo as the 2nd connection. I ever switch the vivo as the 1st connection and poco as the 2nd connection but it always have the same problem. I just want to switch off this music function which is very annoying for me. Maybe have any suggestion?
Joe
I have a rather unique problem, I think.
If this has been addressed before, Kindly redirect me to the appropriate post. Thanks
My F1 doesn't scan for Bluetooth devices after some time. I then have to restart my phone and it will scan for bluetooth devices. But a few hours later (maybe less) when i tap the refresh button, it does nothing.
I'm using MIUI Global 11.0.5.1 stable and have rooted it with Magisk. TWRP installed also.
It has no issues connecting to already paired devices and will automatically connect to the Car bluetooth so i know bluetooth is working ok.
Bluetooth name is POCOPHONE incase that makes any difference. I've Tried with POCO and POCO F1 but no changes.
I've had this issue with the last firmware also. MIUI 10 and its carried over to this version.
Magisk module installed as follows
1controller
WiFi Extender
Busybox
Poco F1 Thermal Unlock
Youtube Vanced
Viper4Android FX Legacy
Might any of these affect bluetooth connectivity (Specifically, Prevent phone from searching for bluetooth devices until restart)
Thanks
Hello
I'm experiencing this issue for a few months now: whenever i connect my smartphone with my car radio (Hyundai HB20) it shows the message "no media" and i need to reconect or turn off and on again the audio streaming in the bluetooth device settings. I need to do this everytime I turn the car radio on.
This happened with my old Mi A2 and now with the Redmi Note 9s. Tested some Motorola and Samsung devices on the car and works fine, also tested my phone on other cars (same model and year) and the problem persists.
Already reseted the bluetooth settings and tryed to change the bluetooth codec in the developer settings and didn't solve the problem. Also tryed to factory reset the Mi A2, no success.
What else culd i try?
rodriribo2 said:
Hello
I'm experiencing this issue for a few months now: whenever i connect my smartphone with my car radio (Hyundai HB20) it shows the message "no media" and i need to reconect or turn off and on again the audio streaming in the bluetooth device settings. I need to do this everytime I turn the car radio on.
This happened with my old Mi A2 and now with the Redmi Note 9s. Tested some Motorola and Samsung devices on the car and works fine, also tested my phone on other cars (same model and year) and the problem persists.
Already reseted the bluetooth settings and tryed to change the bluetooth codec in the developer settings and didn't solve the problem. Also tryed to factory reset the Mi A2, no success.
What else culd i try?
Click to expand...
Click to collapse
i have the same issue with Mi 8 lite after the upate to miui 11 and 12, do you resolve?