Been looking at the Facebook Portal, it's got a USB-C port on the back but according to Facebook's support it's only used "in the factory", so I'm assuming maybe that's something they might use with a flashing tool to reset damaged units. Has anyone messed around with one/found out anything about how it might work? I've noticed that, at least with mine, if I hold down power and the volume up button while it's booting, the screen remains black but the mic light is still on. Thinking this may be some kind of recovery mode perhaps.
Wow, you bought one? I can't imagine.
Sent from my LM-V350ULM using Tapatalk
jwrezz said:
Wow, you bought one? I can't imagine.
Sent from my LM-V350ULM using Tapatalk
Click to expand...
Click to collapse
Oh definitely not. Wouldn't be caught dead buying one. XD Was gifted one as an early christmas gift by a friend, but trying to decide if it's something I can do anything with before I maybe... return it and get a better alexa-enabled device. Feeling really bad about that though considering they wanted to use it to communicate.
Ah-ha! Alexa enabled, but what powers it? Is it some open source thing? AOSP even?
Sent from my LM-V350ULM using Tapatalk
jwrezz said:
Ah-ha! Alexa enabled, but what powers it? Is it some open source thing? AOSP even?
Sent from my LM-V350ULM using Tapatalk
Click to expand...
Click to collapse
From what I’ve been able to gather, it’s running on some form of AOSP with a custom Portal skin- haven’t been able to get much more info than that though as the info on the device past what FB has put out publicly is pretty slim. Definitely doesn’t surprise me that it’s an android device though considering that’s just about all FB seems to develop for outside of the web (Oculus Go, Facebook Home, etc.)
Would be really interesting to try using Discord on this device though, and possibly finding a way to disable FB functions. Might make it a good gift then, if not it’s making it really hard to hold onto it.
Edit: This is my source for AOSP, assuming it’s the “Android Open Source Framework” mentioned:
https://techcrunch.com/2018/10/08/facebook-portal/amp/
I got my hands on one (free gift from company) but I'm trying to figure out what to do with it too.
Hello everyone, sorry I am late to the party. It is definitely android. If you run the chromium browser and attempt to open something like a pdf file, chromium will give you an error and ask for download permissions. This error message also gives you a link to the applications settings page from where you get access to some of the settings. No permissions sadly. You can however go in to the battery optimization settings and filter for all apps and get a full list of everything installed. As can be seen in these images on imgur /a/QWqs0pP
Portal USB-C is video out!
casuallynoted said:
Been looking at the Facebook Portal, it's got a USB-C port on the back but according to Facebook's support it's only used "in the factory", so I'm assuming maybe that's something they might use with a flashing tool to reset damaged units. Has anyone messed around with one/found out anything about how it might work? I've noticed that, at least with mine, if I hold down power and the volume up button while it's booting, the screen remains black but the mic light is still on. Thinking this may be some kind of recovery mode perhaps.
Click to expand...
Click to collapse
We're stoked. We've been using the 15 inch Portal in our conference room. Hooked up a usb-c to HDMI adapter, ran it to our conference room 4K television and bam! Absolutely gorgeous.
Works flawlessly as an output, and even audio (as would be expected) is now running through the monitor.
Oh niiiice ! I actually asked facebook portal customer support, and they said nothin could be done with the usb c port ! It really is a shame cuz some people probably want to output to a bigger screen !
I want to try if usb c headphones and microphones will work. I don't have any around though !
I've tested and seen that I can use the port as a usb c PD charger, it charges my macbook pro and oneplus 6
Maybe we can figure out a way to use ADB to get us into the portal ?
---------- Post added at 05:26 PM ---------- Previous post was at 04:51 PM ----------
Oh wait, never mind charging my macbook pro. It does so only intermittently, I should've guessed the power was too low !
So, any luck unlocking the bootloader or even getting ADB out the USB-C ?
casuallynoted said:
Would be really interesting to try using Discord on this device though
Click to expand...
Click to collapse
Is there nothing that's more information greedy you could run? ;p
USB-C to 3.5 mm audio only alternate mode?
Can anyone please test and let me know if a USB-C to 3.5mm analog audio jack also works - for 3.5 mm jack headphones or speaker out? More specifically, an active adapter because a passive one may not work. Such as this one: amazon.com/Tranesca-Headphone-Adapter-Compatible-Google/dp/B07M6Z2KJ4
What I do know from reading this thread is the Facebook Portal's:
- USB-C Video out (DisplayPort Alternate mode) to monitor works along with audio (monitor passthrough)
- It works as a USB-C power delivery charger
But if audio thru DisplayPort works means only audio to 3.5 mm jack will also work?
Interestingly, the official documentation (portalfb.me/2NAdtz1) claims the audio will continue to come from Portal's speakers. But people here claim it is transmitted to the monitor?
the portal burnt due to an electricity hazard overseas.
I just bought the newest Facebook Portal Mini. it comes with a browsers from Facebook. I was able to make a phone call using duo.google.com then the next day.. I lost permission to the camera: it keeps asking me for permissions.
I think they have some kind of firewall that blocks unusual behaviors
SofiaClover1 said:
So, any luck unlocking the bootloader or even getting ADB out the USB-C ?
Click to expand...
Click to collapse
I don't really know how to do those things... But it tried scanning my portal for open ports, no ip adp connection possible. And then, with usb c connected nothing happens with adb. It can't seem to see it !
I tried enabling hidden developpers options by pressing a lot everywhere in the settings, but no luck !
Alrighty, I've got an update for you guys. It seems like FB locked out that PDF trick sadly. However, I found out that if you restart your portal and hold all three buttons down, then plug in the USB-C, it appears as a device named "Qualcomm HS-USB QDLoader 9008 (COM3)". Based on what I've seen on a few threads here, that's a utility for reflashing and backing up device firmware. I believe we may be able to do stuff with this.
I am looking into getting the FB Portal TV. If the party on the other end of the connection is using their smart phone or tablet, does the image I am seeing become altered from wide screen to a vertical image
or does the unit adapt to keep the screen filled without becoming distorted in some way?
casuallynoted said:
Alrighty, I've got an update for you guys. It seems like FB locked out that PDF trick sadly. However, I found out that if you restart your portal and hold all three buttons down, then plug in the USB-C, it appears as a device named "Qualcomm HS-USB QDLoader 9008 (COM3)". Based on what I've seen on a few threads here, that's a utility for reflashing and backing up device firmware. I believe we may be able to do stuff with this.
Click to expand...
Click to collapse
Have you been able to find out anything more with the qualcomm loader? I have been playing with mine and unable to get a utility to recognize is. It would be nice to be able to get get the fw off it.
Has anyone made anymore progress with this yet?
TylerDurdenK said:
Has anyone made anymore progress with this yet?
Click to expand...
Click to collapse
I have not made any progress at all. I keep checking to see if anyone has done anything at all, but I think these devices are not too popular. Hard to find any information on them at all
So I was able to get fasboot access to my Facebook Portal+ (1st Gen).
If you plug in the power and hold down the vol down + power button. It will show the portal logo on the screen and on a black box it says "Please Reboot...". If you connect to the usb-c port then it looks like there is fastboot access to the device. It's definitely locked down, but it's a start.
I've been trying to figure out how to get adb / sideload access for a while now and this is as close as I've been able to get. I'll let you know if I find out more.
portal.facebook.com/help/663538367374135/
Related
whats up guys, this seemed the best place to post this since it doesnt pertain to any of the devices listed here. i have the Dynavin Android unit (www .dynavin .com / android.php) in my car and im having an issue that so far it seems only 2 other users have had.
with this unit there are 2 "sides", 2 different computers in one is guess you can say. the am/fm radio, CD/DVD, bluetooth, etc is all completely separate from the android OS side. whats happening to me is ALL sound played on android gets distorted, slow, and staticy. i have reinstalled the firmware numerous times, used different SD cards, i have tried different apps, it happens with music from the SD card and internet music, it even happens with the sounds when u adjust the volume. nobody on our huge thread at e46fanatics can figure it out and only 1 or 2 other people have had the issue.
the weird part is that many times it will play fine for a few minutes and then start to slow down, and even rebooting doesnt help at that point. im thinking maybe it could be overheating, but even with the a/c blasting in the car it happens. and the radio/cd part is completely unaffected.
thoughts?
nobody has any idea? its android 2.2
geez tough crowd
ANY ideas?
dammit....
Please use the Q&A Forum for questions Thanks
Moving to Q&A
Can you post a link to the beemer forum thread?
Kind of sounds like a faulty unit though...
Sent from my GT-I9100 using Tapatalk
landwomble said:
Can you post a link to the beemer forum thread?
Kind of sounds like a faulty unit though...
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
thats what im starting to think, hope not though. heres the thread: http://forum.e46fanatics.com/showthread.php?t=839753
opey said:
thats what im starting to think, hope not though. heres the thread: http://forum.e46fanatics.com/showthread.php?t=839753
Click to expand...
Click to collapse
Wow, that's a sizeable thread!
Looks an interesting device. What troubles me is that it appears to be an intermittent issue. I'd agree that heat could be a culprit, possibly - I'd be tempted to try running it out of the car for an extended period of time and see if that helps.
You could also try OSMonitor or similar and see if you can monitor internal temperature. If the ROM is rooted, you could even try under or overclocking it and see if that helps.
Car audio I can cope with, but Android debugging not so much - you could try doing a logcat (assuming you can hook up via USB) and see if it gives you useful info when it's freezing up.
I have to say, this is screaming out for you to install Torque on it and a bluetooth ODBII scanner...!
landwomble said:
Wow, that's a sizeable thread!
Looks an interesting device. What troubles me is that it appears to be an intermittent issue. I'd agree that heat could be a culprit, possibly - I'd be tempted to try running it out of the car for an extended period of time and see if that helps.
You could also try OSMonitor or similar and see if you can monitor internal temperature. If the ROM is rooted, you could even try under or overclocking it and see if that helps.
Car audio I can cope with, but Android debugging not so much - you could try doing a logcat (assuming you can hook up via USB) and see if it gives you useful info when it's freezing up.
I have to say, this is screaming out for you to install Torque on it and a bluetooth ODBII scanner...!
Click to expand...
Click to collapse
yea its not rooted and the manufacturer doesnt seem to want to help with that, and they cant seem to replicate any of the issues the units are having (including force close loops). as for Torque, problem is that the bluetooth doesnt work with the android part, it only works on the radio part for phone calls or streaming music. its like 2 separate OS's in one unit.
landwomble said:
I have to say, this is screaming out for you to install Torque on it and a bluetooth ODBII scanner...!
Click to expand...
Click to collapse
The Android side of the unit has a hardwired OBD connection available, and the latest units have an OBD software module.
opey said:
as for Torque, problem is that the bluetooth doesnt work with the android part, it only works on the radio part for phone calls or streaming music. its like 2 separate OS's in one unit.
Click to expand...
Click to collapse
The unit also has USB ports on the back, that talk to the Android side. You can attach a powered USB hub to that to gain more ports. This way you can add a WiFi USB dongle, and even a BT dongle via USB.
MacConsult said:
The unit also has USB ports on the back, that talk to the Android side. You can attach a powered USB hub to that to gain more ports. This way you can add a WiFi USB dongle, and even a BT dongle via USB.
Click to expand...
Click to collapse
You need to make sure the USB hub is powered independently.
Hey guys, I'm not sure where to even post about this.
I ordered two of the Zero Z902 mini computers, since they're currently on sale at Asia Pads for $75 a pop.
http://www.asiapads.com/product_info.php?products_id=2291
The highlights:
-CPU is a 1.5 GHz Cortex-A8 "AllWinner A10" package.
-1GB of RAM
-4GB internal flash storage
-WiFi B/G/N onboard
-MicroSD slot with support for up to 32GB of additional storage (pretty much standard)
-stock ROM is some sort of ICS
-Unit is freaking TINY, has a built in HDMI male plug on it, and can be powered off of USB. This means if you get lucky with your TV's port layouts and USB port voltage, you could just piggy back this guy onto the back of your TV and not have to run any cables to it.
The spec sheet on AsiaPads is a fairly amazing Engrish translation, but the company actually making the devices is somewhat reputable.
The Z902 appears to be their third or fourth generation of this type of device, and this one is supposedly pretty decent. Here's their site:
http://www.zero-devices.com/
It seems like this device could be pretty decent. My package of two was delivered today to my house. I'm writing this from the office. I wasn't able to find anyone talking about this device on XDA yet, so I figured I'd post about it.
If its awesome, or terrible, I'll post my OOBE and hacking experiments here
My primary use-case for this is a tiny & silent thing to attach to my TV and give me XBMC and NetFlix at a really good price.
I may test it out for use as an emulator if it doesn't immediately burst into flames when playing Avengers in 1080P
Hopefully if that happens I'll catch it on video...
I found a generic CM10 ROM for A10 tablets, so I'm hoping that with some help I can get CWM working on this device and then maybe custom ROMs? We'll see how terrible the stock ROM is.
From what I have, Zero Devices gives you a rooted device right out of the box, and "stock" Android should be pretty good I hope.
First update:
I was able to hook up one of the two Z902s I ordered to my TV without anything catching on fire or dying.
The device works and can put out 1080P video.
I was able to get the stock Market working as expected, and pretty much immediately installed YouTube, which works nicely.
The UI in general feels kinda slow / crappy, and I'm not sure what exactly to pin this on yet.
I am presently very new at operating Android via mouse & keyboard so its pretty awkward LOL
The stock ROM is honestly kinda terrible and, in its present form, basically useless to me.
BS Player plays everything in SW mode for some reason.
NetFlix will not install from the Market.
XBMC crashes at launch without generating any xbmc.log file.
In the Settings > Info, I see the "Neon" CPU feature listed, but I tested both the "Neon" and non-Neon builds.
I was able to get an SSH app installed and working.
What's weird is, there appears to be a su binary present, but SuperUser.apk I am used to using doesn't work.
I mean, I appear to be able to do "root" stuff, but never get any prompts to OK app access to root.
Also I am unable to remount /system as RW.
My next task is to get some form of ADB connection to the device working so I can further troubleshoot this.
I suspect I'm gonna have to modify boot.img to allow /system to be modified. We'll see.
I didn't have time to set up the device so I could SSH into it from work today, so can't make any progress until tonight.
Hey, DivinityCycle, thanks for your post. I have ordered the Z902 but still waiting. Glad to hear they are shipping. I am using an android 4.1 set top box which is a learning experience. Wireless mouse barely usable. I will come back here when I have anything on the Z902.
I just got my Z902 today. I found the same thing that you did regarding the root. Can mount system as writeable. I also found that MANY apps in the Market are not compatible with this device so they won't let me install them.
I'll be interested to hear what other people's experiences are.
You mean "can't" mount the system as writeable?
Honestly I have been busy with a lot of other stuff, so I haven't bothered messing with my Z902 yet, sort of hoping someone else will get root on it first. We also will need someone to get CWM or something equivalent ported before anything truly useful can be done.
Is it even possible to get ADB to this thing working via some sort of USB hookup?
oops. yeah. "cannot" mount.
It does seem you can do a usb hookup. There is some kind of utility (And driver maybe) on their website.
I downloaded an app called "Root Checker" but it just hangs when I click "Verify root access"
ADB is key to getting even a really basic root going, I think.
From what I have read elsewhere, the boot.img must be modified to allow us to remount / and /system as RW.
Post a link to the site, wouldja? I'm going on vacation starting on Friday, so I may actually find some time to work on this a bit.
update:
I installed another App called "Got Root?"
it checked and says:
Successfully located "su" (superuser) on device.
Successfully obtained root privileges through 'su'!!!
Successfully located BusyBox on the device.
---------- Post added at 10:37 PM ---------- Previous post was at 10:31 PM ----------
You go to this site, and register in their "VIP Area"
http://zero-devices.com/
That's where the PDF of the manual is, along with the utility I mentioned. There is no firmware there yet since they are still on the initial firmware version.
standarduser said:
update:
I installed another App called "Got Root?"
it checked and says:
Successfully located "su" (superuser) on device.
Successfully obtained root privileges through 'su'!!!
Successfully located BusyBox on the device.
---------- Post added at 10:37 PM ---------- Previous post was at 10:31 PM ----------
You go to this site, and register in their "VIP Area"
http://zero-devices.com/
That's where the PDF of the manual is, along with the utility I mentioned. There is no firmware there yet since they are still on the initial firmware version.
Click to expand...
Click to collapse
That manual is the best little handbook for these Android HDMI Sticks because of the relatively unfamiliar GUI (mouse and TV) needs
Very sorry to report that after long wait my zero devices Z902 will not boot past the "Android " logo. Resets have not helped.
Sent from my SAMSUNG-SGH-I717 using xda premium
Its A piece Of Crap. I bought one (Pre-ordered) from asiapads.com. The 4.04 Android OS is very unstable and slow. Device claims to be rooted by only one out of ten apps requiring root were able to run. OS has a built in SU hidden somewhere that does not require permission. Most apps requiring root are not granted permission Others like Titanium backup ARE able to get it. You cannot install your own SuperUser app either. It says you do not have root access. No custom Roms are available for the z902 yet so your stuck with stock. Also, large downer is no built in Bluetooth I have 15 different cheap USB Bluetooth dongles which none of them work after hours of tinkering. Must have 2.4g keyboard or mouse to control. Otherwise you have to plug in a mouse or keyboard manually (One at a time) into the one regular USB 2.0 port. After installing about 20 apps on the device the OS became very unstable with choppy mouse movement. I did not like this so i wanted to do a benchmark test. To be fair though i reset the OS to factory settings erasing everything. I got a scare here when doing the factory reset though. The OS would not boot back up. It instead got stuck in a booting loop. Loading the Zero devices welcome screen then The android loading screen. Then turn off loosing hdmi signal to the TV. A few seconds later the Zero devices Welcome screen would load and continuing this loop. After watching 8-9 loops, I gave up (A bit Mad that I even bought the piece of ****) and walked away. After playing on my phone for about 4 minutes the TV made noise drawing my attention. The OS finally loaded up correctly to the initial setup screen. Installed and ran Antutu Benchmark getting a very low score of 2200 (1.5 stars) and the CPU range was from 0.008-1.005 GHz When its claimed to have a 1.5GHz Cortex-A8. I tried to take screenshots of the results but all the screenshot apps required root and kept force closing. Overall I would highly NOT recommend this product. Instead buy a cheap phone or tablet with an hdmi output. Any of them would provide a better product than this UN-powerful PC Stick that is going in my junk drawer. BTW, my phone got a benchmark score of over 5000 and it also has a 1.5GHz processor.
Also it comes with a card that shows how its authentic and that you can check out its authentic on there website. But the websites checker does not seem to work. Whats the point..
I just received the z902 this week and I'm not unhappy with the purchase. I mean, I bought it to give some "intelligence" to an old TV and it is doing the trick.
I must confess I have only installed a couple of apps (MX Player, Youtube, ES File Explorer...), but it doesn't seem to behave slowly. I agree with the fact that I don't understand/like why can't I install some apps (e.g., Chrome).
Overall I'm happy with the device, taking into account that I just want it to play video and maybe surf the web. High def video plays perfectly fine, so I'm good. Despite everything, I hope in a neer future it will be possible to install CWM and then CM10.
BTW, if you don't want to spend money on a wireless keyboard/mouse, and have an Android tablet/smartphone, check DroidMote, for 1.99 is worth the value. In fact I think you can even install it for free if you go the dev's post here at XDA.
Received the Z902 but it does not show up anything on the screen !!
+ they have not listed the Firmware on the VIP area in zero-devices.com
Anyone with a way out ??
ninadpchaudhari said:
Received the Z902 but it does not show up anything on the screen !!
+ they have not listed the Firmware on the VIP area in zero-devices.com
Anyone with a way out ??
Click to expand...
Click to collapse
Maybe it is silly to ask, but did you connect it to the AC? Remember that HDMI is not giving the device any power so you have to connect it via the USB cable provided to the TV or to one plug with an adapter.
If that is not the case... post more details on how you connect it and maybe we can help.
There is also a reset button that does a hard reset.
Sent from my SCH-I815 using Tapatalk
Enough power?
ninadpchaudhari said:
Received the Z902 but it does not show up anything on the screen !!
+ they have not listed the Firmware on the VIP area in zero-devices.com
Anyone with a way out ??
Click to expand...
Click to collapse
I found out the hard way that the 902 needs a little extra power. After using a 600mA phone charger and a TV USB port and only getting half way through the boot sequence I changed to a 1A charger and viola!
Not sure if this is the same issue you've been having, but I thought I'd share it.
---------- Post added at 11:47 PM ---------- Previous post was at 11:39 PM ----------
hmose said:
Very sorry to report that after long wait my zero devices Z902 will not boot past the "Android " logo. Resets have not helped.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Did you try a >=1A charger?
(See my post above)
Tatting, that is a great find! I'm pretty sure my TV's USB port doesn't pack enough punch to run the stick at a full 1A, so that may explain my stability issues. I've been working on a ROM for my tablet, so haven't been focused too much on the stick PCs for now.
I AM learning some good tricks which may help in ROMing the stick eventually. The first / most important thing we need for this device to be more useful is CWM. I honestly don't know how feesible it is to port it to this device.
It seems like CWM mostly just needs to know how the store device partitions are laid out on the device, and in this case, probably needs to be patched for keyboard input. This device is kindof on my back-burner for now since I have a lot of other crap I'm working on and I just got notice that my Raspberry Pi has shipped, so I'll probably have it within 21 days. The Pi seems like it'll occupy much the same usecase as the 902, but without as much crappiness. We'll see!
Bigger power supply! It finally solved my problem. No Z902 boot with 500ma. Unstable with 700ma. I am going for greater than 800ma, Will overheating be the next nuisance?
Sent from my SAMSUNG-SGH-I717 using xda premium
so basically I've determined that although the device IS rooted, the system file system cannot be mounted as R/W. I've tried several different utilities and they've all come up with the same result.
I'm also frustrated in that I've contacted AsiaPads and have not received a response.
---------- Post added at 04:08 PM ---------- Previous post was at 04:04 PM ----------
BTW, I'm using a 1amp power supply on mine. When it comes to amperate, a higher rating on the power supply is ok. The device will only pull the amperate that it needs.
I am using 1 amp supply and Z902 now works properly. Why didn't their support people say this?
Sent from my SAMSUNG-SGH-I717 using xda premium
I purchased an Enco B046 Android-powered head unit for my car, and there are some things I'd love to be able to fix, if I could somehow acquire root access. Most importantly, the GPS functionality. Here's what I know about it:
1. It's a Telechips TCC8925
2. It only has one USB port (Female-A), and it appears to be Host-only. Hooking up a Male-A to Male-A cable between it and a PC, the PC doesn't detect anything on the other end. Hooking up an OTG cable between it and another Android device, the Enco B046 tries to mount the other Android as mass storage..
3. It's running ICS (4.0.4)
4. There's no pinout on the board for another USB port, nor any other pins that are giving +5vdc
5. It does have an SD slot and a card in it. It mounts and works fine.
It's relatively similar in size and form to this:
http://www.slatedroid.com/topic/36988-cx-01-cortex-a5/
Since I can't connect to it via USB and control it with ADB, that eliminates all of the ways to root the device that I have come across.
The most important thing that I need to do is to update the framework.jar, as it suffers from an incorrect GetSpeed function that throws off pretty much every GPS application. It's calculating my land speed at 1.852% of the actual speed. I have fixed the error, and repackaged the framework.jar, but to updated it, alas, I need root access.
It's a shot in the dark, but without some sort of physical connectivity, I'm at a loss. Does anyone have any ideas how I might acquire root on this thing, via software only? Or other ideas as to how I might be able to connect to it?
Thanks!
After further examination, the board has one button on it. If I hold it down during bootup, it goes to a black screen, but a red LED light stays on solid on the board. Generally, that light flashes. I'm wondering if that button doesn't enable FWDN, or Fastboot mode. Maybe that's the ticket.
Hi my friend! Any news?
mpaulonic said:
Hi my friend! Any news?
Click to expand...
Click to collapse
No news yet. I do think I've figured out how to get into FWDN mode, so I should be able to take a complete backup of the NAND, etc. That doesn't do me a whole lot of good, though, since I don't think you can inject something into an FWDN image.
I suppose I could try to recompile it completely from source, but I'm not sure what all drivers are compiled into the current system, and have no experience doing anything of that nature with Android before.
I wish there were a magic "root" apk I could install, and be done with it!
derpderpy said:
No news yet. I do think I've figured out how to get into FWDN mode, so I should be able to take a complete backup of the NAND, etc. That doesn't do me a whole lot of good, though, since I don't think you can inject something into an FWDN image.
I suppose I could try to recompile it completely from source, but I'm not sure what all drivers are compiled into the current system, and have no experience doing anything of that nature with Android before.
I wish there were a magic "root" apk I could install, and be done with it!
Click to expand...
Click to collapse
As usual if we push hard enough and make enough noise on the forums we'll get there, if Charles has to refund every paypal customer because the GPS is crap....he'll find a way to get us root, it's as simple as that
Found this, I don't know if it can help but perhaps the guys who are playing with it can help you....
http://www.cnx-software.com/tag/telechips/
I think the button on the board may actually put it into FWDN mode, but the USB port configuration doesn't seem to allow the board to act in Device-Mode in any way. If you power it on while holding down the button, it seems to do something. The screen shows "NO SIGNAL" which is what would happen if it goes into FWDN mode. But, I can't get anything to communicate with it. It doesn't show up in device manager at all, on multiple PCs.
Looks like for now, our only hope is for someone to create an APK that somehow magically roots the thing. I'll go ahead and hold my breath.
Also Searching
I am also searching for an answer to this one as i have the same issue.
Got it! follow this link and use the package and instructions provided
http://goo.gl/uAJvg
Booyeah!
Yeah, but does it work on our 8925 ? It is said t work on earlier models but not on this one....
Did you test it ?
Thanks
jchuillier said:
Yeah, but does it work on our 8925 ? It is said t work on earlier models but not on this one....
Did you test it ?
Thanks
Click to expand...
Click to collapse
Sure did just rooted my car stereo... had to update the Superuser app and a few others...... next task is to figure out what tweaks to build.prop i need to get all apps in play store.... especially the google apps.
FYI - after applying the update the screen flickered on the boot up. I reset the device (power cycled via the reset button) and then powered it back on and all is good!
I may be able to post some screen shots in a little bit if you like.....
Car stereo..... as in Enco B046 ?
Screenshots.......Enjoy
jchuillier said:
Car stereo..... as in Enco B046 ?
Click to expand...
Click to collapse
This is the one I bought.....
http://goo.gl/fvfyq
attached is a picture of the Android Board inside the device.
WHOA!!! That bad boy is $800 now I only payed $378 shipped
For which car was it ? Because 800 is a bit expensive, we're at 450-500 for a BMW unit, look at www.szenco.com
Thanks a lot for the link anyway, I'll try that tonight....
---------- Post added at 05:04 PM ---------- Previous post was at 05:01 PM ----------
Well, because of you it can be rooted now so the price went up the ceiling
I bought it to use in a 2005 Ford F-150
If you can pay for the gas you can pay 800 for the stereo
jchuillier said:
If you can pay for the gas you can pay 800 for the stereo
Click to expand...
Click to collapse
I don't have to... I already have mine
swjpilot said:
Sure did just rooted my car stereo... had to update the Superuser app and a few others...... next task is to figure out what tweaks to build.prop i need to get all apps in play store.... especially the google apps.
FYI - after applying the update the screen flickered on the boot up. I reset the device (power cycled via the reset button) and then powered it back on and all is good!
I may be able to post some screen shots in a little bit if you like.....
Click to expand...
Click to collapse
This is awesome, thank you very much! Going to try it tonight.
Any luck with build.prop?
Have you guys experienced of the following problems(before rooting)?
-SD Card error message(not related to external microsd)
-Some apps installs but then give a "no sd card present" error
-Google Nav: works for a short while then all you get is "searching for GPS"
So I got this Motorola ET1 tablet that my company was going to throw away to recycling because we are moving.
The problem is that this is an enterprise tablet and its locked with android 2.3.4 Gingerbread. I cant upgrade it and it doesnt even have google play so I cant install anything
Do you guys know how could I upgrade it to a more recent version of Android? Or at least how could I install a program to watch movies? Right now I cant play any of them
Thanks
cannones said:
So I got this Motorola ET1 tablet that my company was going to throw away to recycling because we are moving.
The problem is that this is an enterprise tablet and its locked with android 2.3.4 Gingerbread. I cant upgrade it and it doesnt even have google play so I cant install anything
Do you guys know how could I upgrade it to a more recent version of Android? Or at least how could I install a program to watch movies? Right now I cant play any of them
Thanks
Click to expand...
Click to collapse
Sadly I have been working this too. Much to my extreme dismay Motorola will not give up the OS update without a service agreement. As far as the installation what I have done is just sideload everything that needs to be put on there. I was hoping some kinda of leak or something would have come to light but, no devs ever touched it.
Manwthgun said:
Sadly I have been working this too. Much to my extreme dismay Motorola will not give up the OS update without a service agreement. As far as the installation what I have done is just sideload everything that needs to be put on there. I was hoping some kinda of leak or something would have come to light but, no devs ever touched it.
Click to expand...
Click to collapse
were you able to get a regular charger for the tablet? So far the only thing we have is this big craddle that charges 6 tablets at the same time but I cant use that
We have a fleet of these set up with several different configurations. I quick google search brought up a page called bar code discount dot com that has most of the same stuff we use (but this forum will not let me post links). I have worked with the usb cable charger, the single tablet dock, the 4 tablet dock, and the 4 extra battery dock.
For the cable, you need a charging brick, I think item PWRS-14000-148R. The cable we have look like item 25-153149-01R. The brick plugs into the cable a few inches from the USB connector. The USB connector need not be plugged into anything, but can be used in flashing the rom from a computer (or you can do that from a micro-sd).
The single tablet dock (item DC1000-1000U) uses the same charging brick.
I have not used the above web page nor am I associated with them in any way. But the parts you need are out there.
---------- Post added at 11:28 AM ---------- Previous post was at 11:19 AM ----------
It is also true that stock, the et1 has a usb port on the top edge. We replace this port with a bar code scanner, but I wounder if that can be used to change it...
how do I flash my andriod box? below are the spec.
CPUAmlogic S905X Quad-Core Cortex-A53 64-bit 2GHzGPUMali-450 5-Core GPU OSAndroid 6.0RAM1GB/2GB DDR3 ROM8GB / 16GB eMMC
Android VersionAndroid 6.0File SystemFAT32/NTFSMenu LanguageEnglish/German/Spanish/France/Italia/Nederland/Poland/Russia/Korean/Japanese/Simplified Chinese/Chinese-traditional etc.System UpgradeUSB portVideo StreamingHTTP、RTSP
Support Decoder formatHD MPEG1/2/4,H.264, HD AVC/VC-1,RM/RMVB,Xvid/DivX3/4/5/6 ,RealVideo8/9/10Support Media formatAvi/Rm/Rmvb/Ts/Vob/Mkv/Mov/ISO/wmv/asf/flv/dat/mpg/mpegCard readerSD/SDHC/MMC cardsHDD file systemFAT16/FAT32/NTFSImageHD JPEG,BMP,GIF,PNG,TIFSupport SubtitleSRT/SMI/SUB/SSA/IDX+USBHigh Difinition video outputSD/HD max.1920×1080 pixel
WIFI2.4G 802.11 b/g/n EthernetStandard 10/100MKD Player17.4(keep upgrading)BTBT4.0Highlightled time displayUSB host2 High speed USB 2.0,support U DISK and USB HDDHDHDMI newest version up to 4k2k Output 60FPS4K2k hd decoding4k2k H.265 Hardware Video Decode and 4k2k Output3DHardward 3D graphics accelerationPower DC 5V/2A ,Power ON :blueWirelessBuilt in WiFi1080P/AV/3GSupportMouse/ KeyboardSupport mouse and keyboard via USB;Support 2.4GHz wireless mouse and keyboard via 2.4GHz USB dongle
You're obviously new to this so I'd like to ask you not to do it. Flashing ROM or whatever you want to flash doesn't necessarily make your device better, also if you make a mistake - Usually that ends in bricking the device - then no one is responsible but you, and you'll have very hard time fixing the device.
Don't waste time and good working device for whatever reason you want to do this.
If you're still persistent on flashing your device may I know why you want to do it?
XDHx86 said:
You're obviously new to this so I'd like to ask you not to do it. Flashing ROM or whatever you want to flash doesn't necessarily make your device better, also if you make a mistake - Usually that ends in bricking the device - then no one is responsible but you, and you'll have very hard time fixing the device.
Don't waste time and good working device for whatever reason you want to do this.
If you're still persistent on flashing your device may I know why you want to do it?
Click to expand...
Click to collapse
Yes I am newbie to these android boxes or tv boxes.
I purchased this box from local store 2 yrs ago. Not all channels stopped working. The box itself works (can't do much).
I wanted to delete whatever software they have installed and install basic Android, where I can install my own apps. Mostly iPTV smarter app.
that box right now is useless to me.
Is Linux box same as andriod? (sorry this could be a different question)
I believe they installed linux on Andriod box. Based on this, my menu looks just like this
—Download-update-Linux IPTV - EWEAT
www.eweat.com
but the interface looks like this
IPTV BOX Live tv pro+ - EWEAT
The best IPTV Box-Android system EWEAT Android 6.0 IPTV box. Enjoy 600+ hot channels & latest thousands of movies, watching which you want. Channels from our server, some channels is Ultra HD and HD with good image quality. 650+ Hot channels Hot Channels of Bein sport/Star...
www.eweat.com
What's your device model? There may be different ways to do it.
No, linux is obviously different from android box. Can't say which is better, but generally speaking I'd prefer android.
XDHx86 said:
What's your device model? There may be different ways to do it.
No, linux is obviously different from android box. Can't say which is better, but generally speaking I'd prefer android.
Click to expand...
Click to collapse
Thanks for helping
I really don't know the exact model. I spent weeks googling and youtube based of the manufacture label. Its says HD-5301B+. The closest I got to was the safe mode menu here
—Download-update-Linux IPTV - EWEAT
www.eweat.com
thats why I was thought my box in Linux? when I look at actual interface of my box, it matches these
HD100C Arabic IPTV Set Top Box with 2 year Subscription
Catcast Technology Co.,Ltd is a high-tech enterprise which concentrates on the research, manufacture, sale and engineer service of digital TV headend & broadcasting equipments with 18 years history in Chengdu, China. Catcast is building up both domestic and overseas markets while making a good...
www.dvbcast.com
and
IPTV BOX Live tv pro+ - EWEAT
The best IPTV Box-Android system EWEAT Android 6.0 IPTV box. Enjoy 600+ hot channels & latest thousands of movies, watching which you want. Channels from our server, some channels is Ultra HD and HD with good image quality. 650+ Hot channels Hot Channels of Bein sport/Star...
www.eweat.com
I came across HD100C box as well.
It's device specific so if you can't find the device model then I can't do much.
As for flashing you can only apply update which obviously doesn't do what you want, but you can try factory resetting. Some bloatware can be removed by factory resetting. Here is how.
Alternatively you can use SD card to apply update from it - Should you find the firmware - by following this guide.
XDHx86 said:
It's device specific so if you can't find the device model then I can't do much.
As for flashing you can only apply update which obviously doesn't do what you want, but you can try factory resetting. Some bloatware can be removed by factory resetting. Here is how.
Alternatively you can use SD card to apply update from it - Should you find the firmware - by following this guide.
Click to expand...
Click to collapse
I've been working with him on another site about this and have told him pretty much the same thing you have. This is his Device model HD-5301B IPMacro this is all I could find on it
CPU: RT6856 MediaTek SoC 700Mhz MIPS
OS: Androdi INNOXPLAY
It most certainly does not Have an Amlogic S905X in it. He want to flash it with custom firmware because it's a locked one provider box that he cannot sideload apk's to. Thing is there is just not a custom firmware out there for it. I've spent way more time looking for one for him than I wanted to but I'm a nice guy. I've told him to chalk it up as a learning experience. Don't buy one provider boxes and get something that's main stream that way you stand a better chance of doing things with it in the future.
Hotrod369 said:
I've been working with him on another site about this and have told him pretty much the same thing you have. This is his Device model HD-5301B IPMacro this is all I could find on it
CPU: RT6856 MediaTek SoC 700Mhz MIPS
OS: Androdi INNOXPLAY
It most certainly does not Have an Amlogic S905X in it. He want to flash it with custom firmware because it's a locked one provider box that he cannot sideload apk's to. Thing is there is just not a custom firmware out there for it. I've spent way more time looking for one for him than I wanted to but I'm a nice guy. I've told him to chalk it up as a learning experience. Don't buy one provider boxes and get something that's main stream that way you stand a better chance of doing things with it in the future.
Click to expand...
Click to collapse
Good people should really stop trying imo, like the more you try the more the dude you're talking to asks.
And usually just impudently asks for the unreasonable without doing any research whatsoever by themselves, how rude can someone get?
Anyway lemme give you and people like you a cookie. Don't actually listen to my opinion, good natured people like you are still needed.
Hotrod369 said:
I've been working with him on another site about this and have told him pretty much the same thing you have. This is his Device model HD-5301B IPMacro this is all I could find on it
CPU: RT6856 MediaTek SoC 700Mhz MIPS
OS: Androdi INNOXPLAY
It most certainly does not Have an Amlogic S905X in it. He want to flash it with custom firmware because it's a locked one provider box that he cannot sideload apk's to. Thing is there is just not a custom firmware out there for it. I've spent way more time looking for one for him than I wanted to but I'm a nice guy. I've told him to chalk it up as a learning experience. Don't buy one provider boxes and get something that's main stream that way you stand a better chance of doing things with it in the future.
Click to expand...
Click to collapse
thanks, I appreciate that. its a good learning experience.
One thing I wanted pull back from my post is that my box is not IPmacro 5301. IPmacro is just another vendor selling that box. I digg alot of other vendors. Such as NoorHDTV, unitedTV, catcast etc. they all have same box, but under different name.
Just found another vendor http://androidtvboxquadcore.org/201...an-400-channels-two-years-of-service-include/
See attached photo of the safe mode window. what is this URL used for? I do have a paid iPTV service, should I add that here? or should I add the m3u URL directly here?
my question is still outstanding, whether my box is android or Linux?
XDHx86 said:
Good people should really stop trying imo, like the more you try the more the dude you're talking to asks.
And usually just impudently asks for the unreasonable without doing any research whatsoever by themselves, how rude can someone get?
Anyway lemme give you and people like you a cookie. Don't actually listen to my opinion, good natured people like you are still needed.
Click to expand...
Click to collapse
Thank you for the compliment I am good natured. I'm actually disabled and can't work anymore so helping people let's me feel I'm still useful in the world. lol I Have a TranSpeed 8K Ultra-HD S905X3 box that came with truly cheesy firmware so I set out on a mission to make the box as good as possible without a worry over ruining it. I wasn't going to use it as it was. After several failures trying to find a suitable firmware and bricking it several times I found the SlimBox Rom and am a happy camper.
Before I found the SlimBox I set out on a mission to take another firmware that worked good but wasn't set up for my wifi chip and remote configs and fix it myself. I got as far as getting it unpacked and finding the files I needed to do the fix but wasn't able to repack it. There just not a lot of good software out there for Android 9.0 or there wasn't at the time. Ok I'm rambling have a great evening.
I just connected my box using usb male cable and nothing is happening to USB burning tool or making any sound to my PC.
Did you find the reset button and have it pushed when you powered up the device?
Hotrod369 said:
Did you find the reset button and have it pushed when you powered up the device?
Click to expand...
Click to collapse
I did. all it does, restarted my box. I can enter the safe mode menu/security menu by just pressing 0 few times at reboot, so I don't know how useful that button. Its hard too.
Disconnect the box completely from everything but the power. Have to the box shut off depress the reset switch then plug the usb into the USB 2.0 port on the box. Then the burner should detect the box. Make sure the USB cable is rated for data transfer and the you are plugged into USB 2.0 port on the PC.
Hotrod369 said:
Disconnect the box completely from everything but the power. Have to the box shut off depress the reset switch then plug the usb into the USB 2.0 port on the box. Then the burner should detect the box. Make sure the USB cable is rated for data transfer and the you are plugged into USB 2.0 port on the PC.
Click to expand...
Click to collapse
I have this cable
QVS USB 3.1 (Gen 1 Type-A) Male to USB 3.1 (Gen 1 Type-A) Male Cable 3 ft. - Black - Micro Center
Get it now! This cable connects your computer to any USB device with Type A female port. Works with development boards that uses USB Type-A female ports including JTAG programming modules. It is USB 3.0/3.
www.microcenter.com
I have one cable for HDMI connected
Other is the power.
3rd is the USB male A to Male A
I noticed, even when the power cable is disconnected the box seems on because USB cable is connected.
Some people said, to press the reset button, then connect usb to PC? I did that too nothing happens.
If I have the wrong img file, it should still at least detect it?
You know that reminds me. It's been a good while since I've done this and my memory ain't what it used to be. disconnect the power also. You don't want the box connected to anything. Then press the reset and then connect the USB.
Hotrod369 said:
You know that reminds me. It's been a good while since I've done this and my memory ain't what it used to be. disconnect the power also. You don't want the box connected to anything. Then press the reset and then connect the USB.
Click to expand...
Click to collapse
yes I tried this too. Nothing is working. Is there an alternative method?
Not that I know of.
Hotrod369 said:
Not that I know of.
Click to expand...
Click to collapse
what else I should do? I am able to run the upgrade.bin file via USB from this website http://www.eweat.com/download/iptv-box-linux/
It does complets the upgrade process. but the software is still there. I tried downloading some other .bin file and tried, to run that as upgrade it failed. so I know that website upgrade.bin is correct.
The ROM is a Disk Image File. I Don't know what to tell you. I'm not going to help you brick the box. Maybe somebody else will chime in because this is above my knowledge level.