Has anyone had success getting wireless charging to work on the 6T? Before you start, I know, it's not built in. I mean with one of those little cards you plug into the bottom and slip between the phone and case. I have a 10w capable charging pad I'd like to use. The receiver I got doesn't seem to go in far enough. When plugged in to my old 3T, it will charge wirelessly and it doesn't go all the way into the phone unlike the 6T. I noticed that with the official OP charging cable there is a little click when inserting when then and only then it will charge. I can't get the receiver in far enough before bottoming out to get that click. Or would current output not be high enough on the receiver for the phone to recognize?
CosMiiK said:
Has anyone had success getting wireless charging to work on the 6T? Before you start, I know, it's not built in. I mean with one of those little cards you plug into the bottom and slip between the phone and case. I have a 10w capable charging pad I'd like to use. The receiver I got doesn't seem to go in far enough. When plugged in to my old 3T, it will charge wirelessly and it doesn't go all the way into the phone unlike the 6T. I noticed that with the official OP charging cable there is a little click when inserting when then and only then it will charge. I can't get the receiver in far enough before bottoming out to get that click. Or would current output not be high enough on the receiver for the phone to recognize?
Click to expand...
Click to collapse
I have been using wireless charging since day one. No issues at all. Lay it on wireless charger at night. Wake up to full charge. No need to charge through out the day cause battery is fantastic. This is the one I use.
https://www.amazon.com/gp/aw/d/B01M11UT3V?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
borijess said:
I have been using wireless charging since day one. No issues at all. Lay it on wireless charger at night. Wake up to full charge. No need to charge through out the day cause battery is fantastic. This is the one I use.
https://www.amazon.com/gp/aw/d/B01M11UT3V?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
Click to expand...
Click to collapse
Thank you! Just ordered one.
What is the point of using that thing are you guys saying you keep it plugged into the phone all day long? Wouldn't that get in the way or be annoying?
Swimguy14 said:
What is the point of using that thing are you guys saying you keep it plugged into the phone all day long? Wouldn't that get in the way or be annoying?
Click to expand...
Click to collapse
This phone can pretty much be charged once a day with the way most of us are using it. Having it slowly charge over night with wireless charging may be less straining in the battery. I'm tempted but so far I just charge to around 80% at night before bed and unplug overnight.
I was looking at that one on Amazon. Seems like the gold one on there may be better?
My question is, if you have to plug the wireless charging card into your USB C port anyway, does that defeat the entire purpose? Not dissing it or anything, that's very subjective, but.....
H4X0R46 said:
My question is, if you have to plug the wireless charging card into your USB C port anyway, does that defeat the entire purpose? Not dissing it or anything, that's very subjective, but.....
Click to expand...
Click to collapse
That's what I was thinking
Swimguy14 said:
That's what I was thinking
Click to expand...
Click to collapse
Just remove cable. No big deal I have done this. Plus I don't use the dongle only Bluetooth headphones.
The reason that I use a wireless charging receiver pad plugged into my usb-c is because I've seen more than one of them go bad on other phones.
Besides the power button, the next most likely part of a phone to fail is its charge port. Likely because of sheer mechanical wear and tear on both these components. Which is why I use gestures to turn on and off my display, and that wireless receiver.
However, it's not without drawbacks:
- I'm not sure that having something perpetually plugged in doesn't stress the port much less than taking something in and out. But I figure it does.
- It's a pain to use the port for anything else, like otg drives or wired headphones or adb
- dash charging is WAY faster than wireless
CosMiiK said:
Has anyone had success getting wireless charging to work on the 6T? Before you start, I know, it's not built in. I mean with one of those little cards you plug into the bottom and slip between the phone and case. I have a 10w capable charging pad I'd like to use. The receiver I got doesn't seem to go in far enough. When plugged in to my old 3T, it will charge wirelessly and it doesn't go all the way into the phone unlike the 6T. I noticed that with the official OP charging cable there is a little click when inserting when then and only then it will charge. I can't get the receiver in far enough before bottoming out to get that click. Or would current output not be high enough on the receiver for the phone to recognize?
Click to expand...
Click to collapse
Why would you like to have a wireless charger? The cable charging is amazing is so fast. I normally charge round at 30 percent and I went to play battlefield 5 two games my phone will be fully charged is so fast. Not worth it to get a wireless charger. But is your phone do what you want I'm just here to give you a opinion lol
CosMiiK said:
Thank you! Just ordered one.
Click to expand...
Click to collapse
borijess said:
I have been using wireless charging since day one. No issues at all. Lay it on wireless charger at night. Wake up to full charge. No need to charge through out the day cause battery is fantastic for Edu Birdy website. This is the one I use.
https://www.amazon.com/gp/aw/d/B01M11UT3V?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
Click to expand...
Click to collapse
Thanks. This battery fixed my problem.
borijess said:
I have been using wireless charging since day one. No issues at all. Lay it on wireless charger at night. Wake up to full charge. No need to charge through out the day cause battery is fantastic. This is the one I use.
https://www.amazon.com/gp/aw/d/B01M11UT3V?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
Click to expand...
Click to collapse
Does it work if I have the terminal with the original red case?
Lack of wireless charging is my only real gripe with the 6T. This sounds like a good solution if you never plan to use the USB port. I like the quick wired charging but having the option for wireless would be a good feature. How hard could it have been for OnePlus to add? Is the back case metal? It looks like glass to me.
Just easier for me to plug in my USB-C slow charger. Not sure what the advantage is to doing this. If you put it between the back of the phone and a case, I get it. Just plugging it into a USB-C wireless receiver seems like a waste of 15 -20 bucks for zero gain. At least for me.
I bought this one so I can still charge it if needed. https://www.amazon.com/gp/product/B07QNW32V4/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Related
i was shopping for a oem Car dock that would work with our phones but also fit any case i wanted to put in the dock so heres the solution im ordering mine this week
http://www.amazon.com/iBolt-Vehicle-Car-Mount-Dock/dp/B008B0WNA6
Did you get it? How did it work out?
Sent from my HTC One X+ using Tapatalk 2
I've seen this one on amazon, Kidigi usually makes good quality stuff and - as it looks - comes with the insert as well so it could be used w and w/o case
http://www.amazon.com/Car-Charger-M...2&keywords=kidigi+charging+car+dock+htc+one+x
...comparison with the price of the iBolt ...looks like the same device to me.
I've had the iBolt car dock for a few days now, and it's working fine. It's a little clunky compared to my old Atrix car dock. I don't have a case on my phone, and the clamp on the top seems to sit on top more than grab it, but the phone is snug in there.
J Cubed said:
I've had the iBolt car dock for a few days now, and it's working fine. It's a little clunky compared to my old Atrix car dock. I don't have a case on my phone, and the clamp on the top seems to sit on top more than grab it, but the phone is snug in there.
Click to expand...
Click to collapse
Have you had any charging issues with yours?
When it goes into car mode and navigation is on, it barely charges if at all.
I spoke with iBolt and they are sending me a new one. Hopefully this resolves the issue.
I am still curious if anyone else is having this issue.
TeK9samurai said:
Have you had any charging issues with yours?
When it goes into car mode and navigation is on, it barely charges if at all.
I spoke with iBolt and they are sending me a new one. Hopefully this resolves the issue.
I am still curious if anyone else is having this issue.
Click to expand...
Click to collapse
The issue isn't the charger but the USB cable not being shorted to put phone into AC charging. Pins 4&5 need to be shorted to allow this to happen. I ordered two of these http://www.amazon.com/gp/product/B007F1DV76/ref=oh_details_o03_s00_i00
to go along with this http://www.amazon.com/gp/product/B008B2EFA0/ref=oh_details_o05_s00_i00
and has allowed me to use the HOX+ for hours of navigation and still charge the phone.
For car dock I use this: http://www.slipgripcarmounts.com/SlipGrip-Vent-Holder-For-HTC-ONE-X-S720E-Using-Seidio-Surface-Case_p_130568.html
I agree that the ibolt is a little clunky but i love it. Its really sturdy. It stays in the position you locked it down at. It's easy to dock the phone with 1 hand. I havent noticed any charging issues but i'll keep an eye on that now that you mentioned it.
interesting
and to think i was going to try and mod my Atrix toys to see if i could make them work.. .this looks way easier, wonder why they dont include the proper cable in the first place or if there are any other docks similar
techcontrol said:
The issue isn't the charger but the USB cable not being shorted to put phone into AC charging. Pins 4&5 need to be shorted to allow this to happen. I ordered two of these http://www.amazon.com/gp/product/B007F1DV76/ref=oh_details_o03_s00_i00
to go along with this http://www.amazon.com/gp/product/B008B2EFA0/ref=oh_details_o05_s00_i00
and has allowed me to use the HOX+ for hours of navigation and still charge the phone.
For car dock I use this: http://www.slipgripcarmounts.com/SlipGrip-Vent-Holder-For-HTC-ONE-X-S720E-Using-Seidio-Surface-Case_p_130568.html
Click to expand...
Click to collapse
Hello,
Well it's been quite some time but I didn't wanna open a new thread for this.
I'm using the iBolt dock for my HOX for quite some time and as told above it charges really really slow.
You might say it is caused by the cable, makes sense, but the charger I use to connect the iBolt is the geniune HTC car charger, which does charge the phone pretty fast.
Also, I exit car mode when I don't need it and turn the screen off in order to charge more, but it randomly and frequently turns the phone on. Sometimes just the Android homescreen but sometimes it re-launches the car app too. I was planning to call iBolt for this but I do not have much hope for getting detailed information about the output (actually the USB pin design) since there is no information about this on the web sites.
Can anyone confirm that it supports fast (normal) charging? It becomes useless beacuse of this issue.
You can easily check for yourself. While the phone is docked in-car, do the following: Settings>Power>verify that phone reports "Charging, (AC). If phone does not say this then you are in-fact charging at 500mA. The i-dock/HTC Charger must be capable of providing enough current to charge at 1A and phone must state it's in AC charging. If this is not the case, your phone will discharge while being used in-car.
I had the same issue of non-charging when I first got my phone in December. My research led me to the solution I previously posted. I do not use car-mode since the only app I use while driving is Waze. I hope this helps.
techcontrol said:
You can easily check for yourself. While the phone is docked in-car, do the following: Settings>Power>verify that phone reports "Charging, (AC). If phone does not say this then you are in-fact charging at 500mA. The i-dock/HTC Charger must be capable of providing enough current to charge at 1A and phone must state it's in AC charging. If this is not the case, your phone will discharge while being used in-car.
I had the same issue of non-charging when I first got my phone in December. My research led me to the solution I previously posted. I do not use car-mode since the only app I use while driving is Waze. I hope this helps.
Click to expand...
Click to collapse
Late thanks =)
After writing that message it came to me too and checked it, though it was saying that it is AC charging but I can swear to anything, whether car mode or screen is on, or not, it is not charged in 1000mA mode.. When I directly charged it with the genuine charger, it was fine.
So bought a 2amp car charger, and used its cable, and it works fine now.
May be, the genuine HTC charger CABLE and the iBolt are not quite friendly with each other. I remember Nokia's not launching PC Suite when it was not a genuine Nokia cable, may be a trick like that. iBolt does not like genuine cables or genuine cable does not like oem "sockets"
Has anyone purchased/used one yet? I am looking at getting one, but haven't yet, mostly because I haven't found one that I am sold on. Thanks
I've got two different ones that I've tried now and neither of them keep the phone charging, but the battery will usually stay at the same amount. They charged my Nexus 5 pretty well even under hard use while driving.
RED ZMAN said:
I've got two different ones that I've tried now and neither of them keep the phone charging, but the battery will usually stay at the same amount. They charged my Nexus 5 pretty well even under hard use while driving.
Click to expand...
Click to collapse
I'm having the same issue. Which chargers did you try? Mine is this one
Weird, because my Tylt Vu works just fine with it.
Also interested in seeing what people are finding useful.
I'm looking to buy one soon, and this is the one I have my eyes on now. http://www.amazon.com/CHOETECH-Wireless-Charging-Blackberry-included/dp/B00JA7HNZO
3 Coil Charger and plenty of good reviews
AB_ said:
Also interested in seeing what people are finding useful.
I'm looking to buy one soon, and this is the one I have my eyes on now. http://www.amazon.com/CHOETECH-Wireless-Charging-Blackberry-included/dp/B00JA7HNZO
3 Coil Charger and plenty of good reviews
Click to expand...
Click to collapse
The one you've linked to isn't a car charger..?
Varming said:
The one you've linked to isn't a car charger..?
Click to expand...
Click to collapse
I don't know how I missed everything about this thread.
It's not a car charger, I'll take a seat and just watch. My mistake. Long day at work.
InsaneJester17 said:
I'm having the same issue. Which chargers did you try? Mine is this one
Weird, because my Tylt Vu works just fine with it.
Click to expand...
Click to collapse
Funny enough, one of them is the same one you just posted, just a different brand name. Worked good for my Nexus 5, but my LG G3 usually just stays at the current level when I put it on there with Ingress or Waze plus BT Streaming going on. If it is hot out it loses charge slowly.
Here's the other one.
www.amazon.com/dp/B00INRZVF6/
Grips MUCH better, and is a really nice mount. 3 coil also, but not enough juice to do better than the other one. I've tried multiple 2.1A usb chargers too.
RED ZMAN said:
Funny enough, one of them is the same one you just posted, just a different brand name. Worked good for my Nexus 5, but my LG G3 usually just stays at the current level when I put it on there with Ingress or Waze plus BT Streaming going on. If it is hot out it loses charge slowly.
Here's the other one.
www.amazon.com/dp/B00INRZVF6/
Grips MUCH better, and is a really nice mount. 3 coil also, but not enough juice to do better than the other one. I've tried multiple 2.1A usb chargers too.
Click to expand...
Click to collapse
Good to know. I almost bought the one you have hoping it would solve my issue. Back to the drawing board I suppose.
RED ZMAN said:
Funny enough, one of them is the same one you just posted, just a different brand name. Worked good for my Nexus 5, but my LG G3 usually just stays at the current level when I put it on there with Ingress or Waze plus BT Streaming going on. If it is hot out it loses charge slowly.
Here's the other one.
www.amazon.com/dp/B00INRZVF6/
Grips MUCH better, and is a really nice mount. 3 coil also, but not enough juice to do better than the other one. I've tried multiple 2.1A usb chargers too.
Click to expand...
Click to collapse
Does your DigiYes consistently charge your phone? I have one of the DigiYes models, but I'm finding it frequently stops charging, often within seconds of beginning charging, though sometimes it lasts a few minutes before giving up. I always get the "Wireless Charging" message on the display, never the "slow charging" warning.
I tried swapping their 2.1A cigarette lighter adapter for an Anker 2.4A charger -- same deal. Tried adjusting the vertical position in the charger -- sometimes seems to last a little longer before giving up, but generally doesn't help at all. When it stops charging, the blue light stays on (rather than going back to green).
When it does charge, I seem to get a decent charge current out of it. Very confusing, and probably going to get shipped back.
Edit: it seems to drop out less when charging from wall power, though it still happens -- perhaps correlated with greater power demands on the phone (Google Earth).
I did state above that it charges my phone, but if Navigation and BT Streaming is going on it keeps it at a steady level, or if hot discharges slowly.
If you don't have a 3 coil QI charger, positioning is very important, if it charges and stops, it is a positioning issue for sure.
Changing to a higher amperage charger won't help, as Qi only puts out so much. The new Qi standard coming out should fix this for us though, it transmits 2 amps I think, and has more distance so positioning shouldn't matter AS much.
RED ZMAN said:
I did state above that it charges my phone, but if Navigation and BT Streaming is going on it keeps it at a steady level, or if hot discharges slowly.
If you don't have a 3 coil QI charger, positioning is very important, if it charges and stops, it is a positioning issue for sure.
Changing to a higher amperage charger won't help, as Qi only puts out so much. The new Qi standard coming out should fix this for us though, it transmits 2 amps I think, and has more distance so positioning shouldn't matter AS much.
Click to expand...
Click to collapse
Does the DigiYes disconnect constantly like the one I have? Or no?
Nope.
My other one did, but after adjusting how high it sat with the bottom brace that problem went away.
My air dock keeps the phone at a steady charge while running navigstion, bluetooth (aptx) via stock music app, and 100% brightness. The thermal protection activates eventually and lowers the brightness to 90%, and then it starts to very slowly charge. It charges fast if not running anything.
Also, you don't need 3 charging coils. My powerbot disk style charger easily works without worrying about position. I opened it up and the whole thing (~2.5") is one big coil. The air dock works well too, but I haven't opened it up.
flaring afro said:
My air dock keeps the phone at a steady charge while running navigstion, bluetooth (aptx) via stock music app, and 100% brightness. The thermal protection activates eventually and lowers the brightness to 90%, and then it starts to very slowly charge. It charges fast if not running anything.
Also, you don't need 3 charging coils. My powerbot disk style charger easily works without worrying about position. I opened it up and the whole thing (~2.5") is one big coil. The air dock works well too, but I haven't opened it up.
Click to expand...
Click to collapse
I have two air docks (from the original crowd funding campaign) and neither one of them will hold my G3 (with the included magnets used). How well is your sticking? I wonder if I got an early batch that didn't stick well?
Patrick
preilly44 said:
I have two air docks (from the original crowd funding campaign) and neither one of them will hold my G3 (with the included magnets used). How well is your sticking? I wonder if I got an early batch that didn't stick well?
Patrick
Click to expand...
Click to collapse
It works perfectly fine. Does yours use both magnets and the suction pad? I believe they were separate options in one development point. Also, my car was dusty and it did get some dust on the pad which made it not hold, but wiping it with a damp cloth and letting it dry fixed that issue.
InsaneJester17 said:
Does the DigiYes disconnect constantly like the one I have? Or no?
Click to expand...
Click to collapse
My DigiYes 3 coil frequently disconnects, sometimes in a constant connect-disconnect loop. Other times it holds for a while. It seemed to do better when I put it on a higher amperage charger than it came with, along with the original G3 cable. However this could be coincidence. When it does charge, the charging rate is comparable to any of my desktop qi chargers.
How is this even possible? While using NAV, my G3 is plugged into the car charger is still decreasing in battery life. Albeit slower than when not charging, but it still goes down even though it is charging. What gives?
Using a charger bought at VZW.
Make sure the charger is 2.1 amp...if its a 1 amp, the combo of GPS, data, and screen on will still kill it.
SOCOM-HERO said:
How is this even possible? While using NAV, my G3 is plugged into the car charger is still decreasing in battery life. Albeit slower than when not charging, but it still goes down even though it is charging. What gives?
Using a charger bought at VZW.
Click to expand...
Click to collapse
Yup, totally depends on the charger. Some cheap ones are only .5A and most are 1A, which probably still isnt enough when using GPS and screen on.
SOCOM-HERO said:
How is this even possible? While using NAV, my G3 is plugged into the car charger is still decreasing in battery life. Albeit slower than when not charging, but it still goes down even though it is charging. What gives?
Using a charger bought at VZW.
Click to expand...
Click to collapse
Do yourself a favor and buy mandatory this quality accessories. After you do, forget your question
Car charger:
http://www.amazon.com/Portable-Dual...=1407899058&sr=8-3&keywords=anker+car+charger
USB charging cable:
http://www.amazon.com/2-1A-30PIN-Ch...=UTF8&qid=1407899014&sr=8-6&keywords=kopi+usb
czaplin said:
Do yourself a favor and buy mandatory this quality accessories. After you do, forget your question
USB charging cable:
http://www.amazon.com/2-1A-30PIN-Ch...=UTF8&qid=1407899014&sr=8-6&keywords=kopi+usb
Click to expand...
Click to collapse
How is an old iPhone charger going to help anyone with a G3? Also, what is "this quality"? I think you might've lost or misspelled a word there.
phobos512 said:
How is an old iPhone charger going to help anyone with a G3? Also, what is "this quality"? I think you might've lost or misspelled a word there.
Click to expand...
Click to collapse
Sorry, bad link.
Here's correct one:
http://www.amazon.com/gp/aw/d/B009Z...2e07d400f0894e43b48&pi=SS115#ref=pd_aw_sims_1
Sent from my VS985 4G using XDA Free mobile app
I had this problem starting all the way back on Galaxy Nexus - crappy chargers and cables do not provide enough power to run the phone and the screen. My research and trial and error on many chargers lead me to understand that not only do you need a good high power charger, you need a good cable too. I now run 18awg charge-only cables exclusively as well as a 2.1amp charger. This pair has worked on all my devices since including fast charging on my G2 and G3.
Note that a charge-only USB cable has the data pair shorted and will only work for charging - will not work for data transfer. However the wires inside are thick and work great cars or other situations where you don't need the cable for data.
This is what I use:
Cable
http://www.netimes.com/shop/microusb-charging-cable-black-d-d-shorted18awg100cm-p-3699.html
Charger
http://www.netimes.com/shop/dual-usb-car-charger-adapter-10a-21a-white-p-4810.html
This company is from Hong Kong, but they have pretty fast shipping. It is the only place where I can find (affordable) heavy gauge USB cables.
Same Issue
SOCOM-HERO said:
How is this even possible? While using NAV, my G3 is plugged into the car charger is still decreasing in battery life. Albeit slower than when not charging, but it still goes down even though it is charging. What gives?
Using a charger bought at VZW.
Click to expand...
Click to collapse
I had the same issue with a store-bought charger. It also depends on the amperage output of your vehicle's outlet as well.
If anyone is looking for one with a retractable cable, I bought this one:
http://www.amazon.com/EZOPower-Micr...=8-2&keywords=2.1+amp+usb+charger+retractable
I'm a huge fan of wireless charging. I've installed adapters on my past phones. Does anyone have a wireless charging solution for the Pixel?
I'm a huge fan of searching first...
I cant remember the name of the one I have been using since I purchased my Pixel but they are on Amazon and if you have a phone case then it works great and you cant see it. Plus, if you position it right it does not get in the way of the fingerprint sensor.
jtlrwells said:
I'm a huge fan of wireless charging. I've installed adapters on my past phones. Does anyone have a wireless charging solution for the Pixel?
Click to expand...
Click to collapse
InfiniteReality said:
I'm a huge fan of searching first...
Click to expand...
Click to collapse
I have searched but short of modding a case, I haven't seen one I liked
There is this thing that seems good. Strange, but is a solution.
Edit: it's not rated good, but the idea is this, maybe look for other brands
I use this with a case and it works fine. Slow charge though, but fine for overnight.
Why does anyone want wireless charging? Efficiency is always <60% so you are just burning through energy and time.
haibane said:
Why does anyone want wireless charging? Efficiency is always <60% so you are just burning through energy and time.
Click to expand...
Click to collapse
the S8 charged pretty fast wirelessly, but yes, not as fast, but then just plopping it on, keeping it topped off makes world of difference.
I just ordered a qi Pad and a reciver ..as i want to charge the Phone in my car while hear songs via Bluetooth from Spotify..so yes ..i dont want to Put always the usb in everytime i get in my car ..and sure also that i dont want to use a s8 for this..with all the bloodware on it
Alex-V said:
I just ordered a qi Pad and a reciver ..as i want to charge the Phone in my car while hear songs via Bluetooth from Spotify..so yes ..i dont want to Put always the usb in everytime i get in my car ..and sure also that i dont want to use a s8 for this..with all the bloodware on it
Click to expand...
Click to collapse
In theory, you should actually lose charge while listening to Spotify on Qi depending on where your phone is at on its battery life. Qi charging can run as low as 45% efficency, which means your phone might actually be dying faster than its charging.
haibane said:
In theory, you should actually lose charge while listening to Spotify on Qi depending on where your phone is at on its battery life. Qi charging can run as low as 45% efficency, which means your phone might actually be dying faster than its charging.
Click to expand...
Click to collapse
..yes can be..will see how it goes if the parts arrive..will write it here..if Not i have paid around 30 Euros for nothing
Edit
The Charing things can be Controlled with kernel..so we can maybe change the way how qi charge works atm
I've just bought a wireless car charger cradle and thought I'd share my experience with everyone here.
I'm in and out of a van at work so was looking for something that was quick and easy to place my phone in and easy to quickly remove when needed. I know wireless charging is never going to be as quick as wired but with the wear and tear of plugging and unplugging my device all day I thought wireless charging was a good idea.
I've bought alot of CHOETECH products before and always found them to be good quality, I've been using the same USB c cable made by them since the days of my Nexus 6p. The quality of this charging cradle is certainly just as good. The suction to the windscreen is very strong, the mechanism that grips the phone is very strong and easily adjustable and there is a small led light on the side so that you know it's working.
In the box you also get a spare usb a to usb c cable all's that is needed is a quick charge power supply.
My phone charges quickly when in the holder and even charges while navigating using maps. I would definitely recommend it to anyone interested in a wireless car charger.
https://www.amazon.co.uk/dp/B075M6NMY7/ref=cm_sw_r_cp_apa_aJPlBbW8AWM8C
faybarn said:
I've just bought a wireless car charger cradle and thought I'd share my experience with everyone here.
I'm in and out of a van at work so was looking for something that was quick and easy to place my phone in and easy to quickly remove when needed. I know wireless charging is never going to be as quick as wired but with the wear and tear of plugging and unplugging my device all day I thought wireless charging was a good idea.
I've bought alot of CHOETECH products before and always found them to be good quality, I've been using the same USB c cable made by them since the days of my Nexus 6p. The quality of this charging cradle is certainly just as good. The suction to the windscreen is very strong, the mechanism that grips the phone is very strong and easily adjustable and there is a small led light on the side so that you know it's working.
In the box you also get a spare usb a to usb c cable all's that is needed is a quick charge power supply.
My phone charges quickly when in the holder and even charges while navigating using maps. I would definitely recommend it to anyone interested in a wireless car charger.
https://www.amazon.co.uk/dp/B075M6NMY7/ref=cm_sw_r_cp_apa_aJPlBbW8AWM8C
Click to expand...
Click to collapse
Thanks bro, really useful post. I was looking for something like this too.
Sent from my SM-G950F using Tapatalk
No worries, I think I'm going to get a wireless desk charger for overnight charging next so will write a review of that soon.
I've recently done a tempered glass screen protector install after reading a post on here, I think sharing things that work well and may benefit others is always worthwhile
faybarn said:
No worries, I think I'm going to get a wireless desk charger for overnight charging next so will write a review of that soon.
I've recently done a tempered glass screen protector install after reading a post on here, I think sharing things that work well and may benefit others is always worthwhile
Click to expand...
Click to collapse
Well i don't recommend overnight charging with wireless charge because they don't totally stop when it reaches 100% so that means you will have like ten times more battery power loss in time than cable charge.
Sent from my SM-G950F using Tapatalk
faybarn said:
No worries, I think I'm going to get a wireless desk charger for overnight charging next so will write a review of that soon.
I've recently done a tempered glass screen protector install after reading a post on here, I think sharing things that work well and may benefit others is always worthwhile
Click to expand...
Click to collapse
I got one of the. CHoetech 6 port chargers. And it it absolutely wonderful :good::good::silly: I will second this company with great products. And quality.
I have a Choetech wireless charger, all good but no fast charge.. To stay at the desk when using whatsapp video call is good
No heat on the phone and changer ... always on plugged in pc.