Freebuds 2 Companion APP | FlyBuds Pro Companion APP
Please use on your own risk!
In advance, forgive me my poor english and report all translation misstakes. I will fix them ASAP. I am not native english speaker but try my best
For the FlyBuds Pro Companion App, downloads are below at the end of this post. Its a WIP and some translation errors might happen. Use at your own risk.
Changelog1.0.0.106.1Initial release
1.0.0.121.1New release by HUAWEI
No german Translation yet. Need some more polish and Need to be home for it
Official changelog doesnt exist but the Freebuds 2 App is now 100% like the flybuds app. Seriously, ist basicly same app which just supports Freebuds instead of Flybuds.
1.0.0.121.2Changes on english translation and added german translations for new version
Supported LanguagesEnglish
German (WIP) - Only in 1.0.0.106
Chinese
Official APK from HUAWEI (Chinese)
UPDATE 12.01.20191.0.0.121Download
Translated APP - Freebuds 2 CompanionDownloads1.0.0.106.1Download
Downloads1.0.0.121.1Download
Downloads
1.0.0.121.2
Download
Translated APP - FlyBuds Pro Companion App
Downloads
1.0.2.121.1
Download
Official HUAWEI FlyBuds Pro App
Downloads
1.0.2.121
Download
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Q&A
Q: Can i use this APP with the Honor Flybuds 2?
A: No, they have their own APP. Since 13th of january, Freebuds 2 APP got updated to 1.0.0.121 and its basicly a copy of the FlyBuds App. I decided to support both. But keep in mind that i dont own the FlyBuds and cant test everything. If errors happen, please report here with a screenshot
Q: The package says it supports HWA Audio codec but i cant enable it.
A: In case of the Mate 20 Pro, you need to be atleast on Firmware 9.0.0.171 to be able to use HWA.
Q: How do i setup Bone ID Voice Recognition?
A: Honestly, no idea. It seems we need a newer firmware on our phone to have access to this feature. I will report if i get more informations.
Q: Does voice commands work?
A: Yes, music and calls can be controlled. Please check the manual on how to do this.
Q: The update of my Freebuds 2 keeps failing.
A: Keep trying, i needed 6 trys until it worked.
Q: Can i use my phones voice assistant instead oft he build in one?
A: Yes, once you activate, for example google assistant, the Freebuds 2 app wont show any voice settings anymore and all the settings has to be done inside the google app.
Q: Can i use voice comands to do payments?
A: As far i know, no. I am still investigating.
Q: I speak, for example spanish, can i make a translation into spanish?
A: Yes, PN me and i send you the string.xml. You can translate it by using Notepad++ for example and send it back to me. I will update the APP then
* Updated Mirror to AndroidFileHost *
Best Regards
thanks dude
Gesendet von meinem LYA-L29 mit Tapatalk
Awesome work! Thank you! It was tedious using the translator to use the app each time.
Can anyone comment on music n call quality and does HWA/LHDC codec make any difference?
Please, anyone who has purchased freebud 2/pro, please share your experience on build, comfort, connectivity, audio quality etc..
So cool, thanks!
Can't download that app. Whole page is flooded with trash adds..
tommisjtp said:
Can't download that app. Whole page is flooded with trash adds..
Click to expand...
Click to collapse
Try downloading it from your PC. I'm using Chrome with AdBlocker extension and the file does get downloaded at the first click on the download button, no popups, no ads. From the phone, I was flooded with ads as well.
I am waiting to get approval on androidfilehost. Will change it once done. Sorry
Sent from my Mate 20 Pro using Tapatalk
rakesh2002 said:
Can anyone comment on music n call quality and does HWA/LHDC codec make any difference?
Please, anyone who has purchased freebud 2/pro, please share your experience on build, comfort, connectivity, audio quality etc..
Click to expand...
Click to collapse
I received mine yesterday. Music quality is very good for me (I'm not an expert on this matter). Indoors, the connectivity is awesome. I haven't experienced any issues like sound skips.
Outdoors, I've experienced minor issues having my mobile in my pants' pocket and my hand covering it. But it almost never happened.
Regarding the HWA, I'm using a mate 20 pro LYA-L29 9.0.0.169 and I don't have the inbuilt options in EMUI 9. Waiting for the 9.0.0.171 update which I heard includes the HWA and, in some cases, in-built options outside the freebuds 2 app.
While calling, I have no issues hearing (outdoors) but the person on the line told me that she couldn't hear me very well (Cut audio). I haven't tested it indoors.
The headphones are very comfortable. It fits nice inside the ear so you don't really hear much outside noise at 55% volume. They don't fall easily. I've done some tests like shaking my head fast and running with them and they stay in place.
They feel well-built. They don't have that cheap plastic feeling. It's a shame that they don't have touch controls for skipping songs or changing the volume. On the other hand, they support voice assistant so you can say for instance "Play summertime by my chemical romance" and it will start playing without touching your phone.
They also have voice controls to turn up/down the volume, play/pause, etc.
Battery wise, I haven't used them long enough to drain the battery. I used them continuously for 1 hour and a half without issues. The case charges them so I haven't had the chance of draining them completely.
The wireless charge is awesome. I use the mate 20 pro reverse charge and it's very handy.
I think that covers pretty much everything. If you have any questions I can try to help
Updated the mirror to AndroidFileHost!
Easier for everybody
@izayasan, what about sync issues when watching videos? Is there any delay?
turt said:
@izayasan, what about sync issues when watching videos? Is there any delay?
Click to expand...
Click to collapse
Not really, i noticed 1 sec drops outside when listen to music like 2 times in 30-40 min. But i had smartwatch and 2 Gotchas with me. So far, they work great!
I mean when watching a movie, are the voices synced with the lips of the actors?
turt said:
I mean when watching a movie, are the voices synced with the lips of the actors?
Click to expand...
Click to collapse
Yes, they are synced. I've tested youtube and netflix videos.
Thanks
Added the FlyBuds Pro Companion App. It has basic English translation and i will keep updating them. Wont do much more since i cant test it. I dont not own the FlyBuds Pro.
MirageBlader said:
Updated the mirror to AndroidFileHost!
Easier for everybody
Click to expand...
Click to collapse
Hello, the link is not working it show (error) like empty link, can you please check it.
Thank you,
turt said:
@izayasan, what about sync issues when watching videos? Is there any delay?
Click to expand...
Click to collapse
No delays since day 1, without any FWU. Only in games, which pretty much every bt has. It's only 0,5secs so it's pretty minor.
Hrm201 said:
Hello, the link is not working it show (error) like empty link, can you please check it.
Thank you,
Click to expand...
Click to collapse
Fixed! Sorry, copied only half of the link
Updated to 1.0.0.121
Visually there are no changes. I still belive that we Need atleast 9.0.0.171 Firmware for some feature.
Maybe someone who has 171 on his Mate 20 pro and the Freebuds could confirm or send me some screenshots.
Specially if there are any Buttons for BoneID Settings. HWA Codec Settings are confirmed being there at 171 or higher.
Related
Just got my Sony SBH52 smart bluetooth headset today and wanted to share a quick review for you guys.
Retailer:handtec.co.uk
price: $109 includes 2 day express delivery via Fedex. I received it in a day.
Packaging:
comes in a palm sized box with a green front.
Whats in the box:
Headset
earphones
earbud tips
documentation
mini usb cable
Facts and Features:
i charged it for half an hour before using it. The device is solid and fits nicely in the palm. It has a small OLED screen capable of displaying text.
Main features are it is a dual accessory meaning the headset can be used to answer calls and listen to music without the earbuds as it has a mic and speaker.
It has built in NFC and FM receiver and is capable of TTS.
It has standard buttons pause,play etc and a unique back button which allows access to the device menu. the forward/reverse buttons are used to scroll and play button is select.
Pairing and access:
Since it has NFC built in, its a simple matter of turning on the NFC on the XUZ and touching the device to the back of the XUZ and voila pairing happens.
Once paired the device will ask you to download connect app for the device, and there are some other apps like text,calendar etc you can download.
Performance and battery.
Since I have had it for less than a day its hard to gauge the battery, but it seems decent so far.
Performance wise the controls are pretty solid, scrolling is decent, will take some time to check all the features.
Call quality is excellent. I used it without the earbuds like a mini handset and it was awesome.
Notes:
Its a fingerprint magnet and is advertised as water resistant not waterproof.
Attached are some pics of the device and box and screenshots of the management app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please feel free to ask questions
Update :after having it for a week I can say it is a pretty good device.the device is loud enough when notification arrive but in a loud area might be a little difficult to hear the device. Haven't tried speaking into the device when surrounded by noise.
WatchIt plays nicely with the device but make.sure that you select only needed notifications and ignore the rest. Battery life is good enough for my needs.
When on stamina mode I did notice that it did disconnect twice. I ended up adding the sbh52 app to the stamina app list.
Had some difficulties pairing the device today.had to unpair and re pair.
Please feel free to ask any questions or request for pics
Great !:good:
nice dude...thanks for the first review...
:good:
Nice one - look forward to some more updates...
ringer volume quality especially in crowded areas - can you hear the ringing clearly
incoming call quality in crowded areas (without headphones)
speaker volume quality during calls (During driving becomes an important factor)
multi device connectivity if any dropouts or stable with both simultaneously connected
and finally, when connected to two devices, does the small display show the name of the incoming caller (from contacts) or the number only?
Cheers
D
can you read whatsapp and hangout messages?
thankx
Can you access your contacts from it?
Sent from my C6833 using Tapatalk 4
Thanks for the review !
I Know you only have it for one day now, but, do you let it connected to your XZU all the time or do you paired it when needed (call for instance ?)
Does it drain the battery of your XZU if you let it connected ?
Thanks again !
mozzy said:
Can you access your contacts from it?
Sent from my C6833 using Tapatalk 4
Click to expand...
Click to collapse
Just last call logs
Sent from my C6833 using XDA Premium 4 mobile app
Keoregh said:
Thanks for the review !
I Know you only have it for one day now, but, do you let it connected to your XZU all the time or do you paired it when needed (call for instance ?)
Does it drain the battery of your XZU if you let it connected ?
Thanks again !
Click to expand...
Click to collapse
I did connect it all day and I don't notice it draining too much. I will post screen shots today
Sent from my C6833 using XDA Premium 4 mobile app
danilos2k said:
can you read whatsapp and hangout messages?
thankx
Click to expand...
Click to collapse
There is an app to voice read these but not send like text messages which means every time a message comes your device will speak
Sent from my C6833 using XDA Premium 4 mobile app
I've been playing around with it a bit as well. Haven't taken any calls or listened to music on it yet. I've sent notifications to it - but all i see is the app name. Don't see any additional text (first few words of the message etc). I'm sure there's a setting I'm not seeing...
Using 'WatchIt!' that baileyjr had mentioned in another thread.
cholepuree1 said:
I've been playing around with it a bit as well. Haven't taken any calls or listened to music on it yet. I've sent notifications to it - but all i see is the app name. Don't see any additional text (first few words of the message etc). I'm sure there's a setting I'm not seeing...
Using 'WatchIt!' that baileyjr had mentioned in another thread.
Click to expand...
Click to collapse
Watch it is for the smart watch isn't it
Sent from my C6833 using XDA Premium 4 mobile app
It works with the SBH50 and 52 as well - and can send notifications from any app over.
Also, finally figured out how to see more detail of a notification - press the play/pause button! The user guide below helps.
http://userguide.sonymobile.com/ref...tooth-handset-sbh52#!Event-notifications.html
Loving the device. Very good choice. Great voice quality and WatchIt is great companion app
Sent from my C6833 using XDA Premium 4 mobile app
cholepuree1 said:
It works with the SBH50 and 52 as well - and can send notifications from any app over.
Also, finally figured out how to see more detail of a notification - press the play/pause button! The user guide below helps.
http://userguide.sonymobile.com/ref...tooth-handset-sbh52#!Event-notifications.html
Click to expand...
Click to collapse
That's good to know! Mine came through the post this morning as well so I've been playing around with it. It's actually a lot more functional than I thought it would be - really cool and useful device.
Hardly seems to be draining much battery from the ZU which is good, just FYI the earphones that came with the headset are terrible - but I can confirm it is just the headphones, I plugged some good headphones into the headset and it sounds the same as plugging the headphones straight into the ZU (So pretty good!)
The FB notifications are good, you can select news feed notifications just from specific people which I thought was good, haven't gotten round to trying the Watchit! app yet though, although not sure I'll need it.
Still yet to make a phonecall with it though, but music works well (ID tags work like a charm!). Not convinced about the micro usb charging flap though, see how that holds up over time.
sweet. I checked out the website you posted but it shows that it is still on pre-order. is that true or have they just not updated the status on that yet?
looks like they sold out
ij0rgei said:
sweet. I checked out the website you posted but it shows that it is still on pre-order. is that true or have they just not updated the status on that yet?
Click to expand...
Click to collapse
looks like the 1st batch sold out as soon as i ordered, same thing with clove
Does anybody know what the two settings are in the settings menu on the device? They have on and off options but the icons aren't obvious and the user guide doesn't cover the settings menu.
recieved mine too but I find a small problem , alll though not huge if speak on a call with it to my ears without using earbuds , the voice randomly gets transfered to handset and then back .... I am on stock no root...
I think I know the answer... But the sbh52 doesn't vibrate. Right?
Sent from my C6833 using xda app-developers app
THIS THREAD IS FOR THOSE WHO ARE PLANNING ON BUYING ONE OF THESE WATCHES...OR USERS THAT WISH TO SHARE BUGS OR PROBLEMS THEY'VE ENCOUNTERED.
I'll start....
First off, what is the true RAM of the AW-420/1? Ive read up to 2gb (421) and as low as 512mb...
What is the issue with the 201/421s mic? Is it an hardware or software issue? If SW, does Loki's ROM address this?
I am seeing many comments that criticize the IPxx rating...even simple washing of hands will cause leakage....comments?
I read in multiple posts on German based forums that users were able to install 32GB and 64GB SD, class 10 cards in the 421 and they mounted fine. Has anyone confirmed this?
Does anyone know of a vendor or retailer that is willing to ship either the 201, 420, 421 etc. to the US?
Or....is there anyone in EU willing to help US buyers get these watch's delivered overseas?
i can confirm 32 GB installed and working fast with X201
what is the letest firmware for the Omate TS ? mine is only at v1.8 ?
HaloTechnology said:
what is the letest firmware for the Omate TS ? mine is only at v1.8 ?
Click to expand...
Click to collapse
The proper firmware version can be found by going to Settings/System/About. It is the bottom entry in the about. The current firmware is 20140120
EDIT:
fixed the firmware version. Haven't even had my fist cup of coffee yet, sorry.
Lokifish Marz said:
The proper firmware version can be found by going to Settings/System/About. It is the bottom entry in the about. The current firmware is 20140112
Click to expand...
Click to collapse
hm......Mine is 20140120.154604_V2.0
I thought the TRUESMART was supposed to have a 1.3ghz CPU?? My TS shows a 1.0ghz....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC One using Tapatalk
root and security patch 1.02 on AW-420
Hi, I just tried to install lokifishs root and security patch 1.02 on my AW-420 FW 20131230, but this simply doesn't seem to work. While adb is running a lot of error Messages are displayed, saying either that files cannot be found or that they cannot be written.
Best, nilix24
---------- Post added 17th February 2014 at 12:05 AM ---------- Previous post was 16th February 2014 at 11:30 PM ----------
Hi, I just installed the TalkBack Screen reading accessibility Service from the Play store, but the button to turn it on is simply missing. It seems to be positioned outside the TalkBack introductary message window, but also cannot be focused using an external Keyboard. My hope was that this could eventually be fixed by installing lokifishs root and security patch, but as I wrote in my last post that doesn't work on my AW-420.
I allready read that the Firmware of the AW-414/420 and also the TrueSmart do have issues with the accessibility Services, but couldn't figure this out more detailed. For me accessibility / using TalkBack is essential, so what can be done to solve this?
Many thanks, nilix24
nilix24 said:
Hi, I just tried to install lokifishs root and security patch 1.02 on my AW-420 FW 20131230, but this simply doesn't seem to work. While adb is running a lot of error Messages are displayed, saying either that files cannot be found or that they cannot be written.
Best, nilix24
---------- Post added 17th February 2014 at 12:05 AM ---------- Previous post was 16th February 2014 at 11:30 PM ----------
Hi, I just installed the TalkBack Screen reading accessibility Service from the Play store, but the button to turn it on is simply missing. It seems to be positioned outside the TalkBack introductary message window, but also cannot be focused using an external Keyboard. My hope was that this could eventually be fixed by installing lokifishs root and security patch, but as I wrote in my last post that doesn't work on my AW-420.
I allready read that the Firmware of the AW-414/420 and also the TrueSmart do have issues with the accessibility Services, but couldn't figure this out more detailed. For me accessibility / using TalkBack is essential, so what can be done to solve this?
Many thanks, nilix24
Click to expand...
Click to collapse
Gotta be rooted...but here it is:
http://forum.xda-developers.com/showthread.php?t=2629218
BTW: where did you purchase the 420?
Sent from my HTC One using Tapatalk
TrueSmart microphone quality
The sound on my to smart for phone calls coming in is great. But when I speak it is just garbled and in audible to the other end. I have held the phone in various positions to little avail. This makes no sense because the voice recognition apps are able to follow me reasonably accurately. Anybody else had this problem and does anyone have any advice?
Also, how do I adjust up and down the volume of the speaker for example for phone calls but for other things as well.
Tom19146 said:
The sound on my to smart for phone calls coming in is great. But when I speak it is just garbled and in audible to the other end. I have held the phone in various positions to little avail. This makes no sense because the voice recognition apps are able to follow me reasonably accurately. Anybody else had this problem and does anyone have any advice?
Also, how do I adjust up and down the volume of the speaker for example for phone calls but for other things as well.
Click to expand...
Click to collapse
Hi,
I have the same problem and it's very frustrating for me that' The watch looks beautiful and works well and I can not understand why there is a loud noise when I speak, I hope it's a software problem and the next versions will be resolved.
thanks,
Arie/
mghtymse007 said:
Gotta be rooted...but here it is:
http://forum.xda-developers.com/showthread.php?t=2629218
BTW: where did you purchase the 420?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Thanks, will try ASAP.
Here in Germany it is distrebuted by Pearl and they just have it on stock.
I am not sure if this is the correct place to post this question, but it seems to be the most logical place.
Question: Is it possible to choose your home screen or your last viewed screen as default when you turn on your TS screen? Currently, when you unlock your screen, it goes to the watch. I would prefer it to go to my home android screen.
sickysickybrah said:
I am not sure if this is the correct place to post this question, but it seems to be the most logical place.
Question: Is it possible to choose your home screen or your last viewed screen as default when you turn on your TS screen? Currently, when you unlock your screen, it goes to the watch. I would prefer it to go to my home android screen.
Click to expand...
Click to collapse
Go to settings>security>screen lock to "none".
Sent from my Nexus 7 using Tapatalk
Thanks for your help with the watch face default screen.
I have one more issue I am trying to solve. I followed Daniel Ortiz's "GPS Calibration and Quick Lock Fix" https://plus.google.com/u/0/111628072657804333818/posts/5UyzcSadTmw
Everything worked as shown in the pictures, however, once I leave wifi, I still cannot get a location fix using GPS. This means I cannot use cycling apps, google maps, and the damn time is always wrong. :crying: Does anyone know what steps need to be taken after the GPS calibration guide to have GPS working properly?
sickysickybrah said:
Thanks for your help with the watch face default screen.
I have one more issue I am trying to solve. I followed Daniel Ortiz's "GPS Calibration and Quick Lock Fix" https://plus.google.com/u/0/111628072657804333818/posts/5UyzcSadTmw
Everything worked as shown in the pictures, however, once I leave wifi, I still cannot get a location fix using GPS. This means I cannot use cycling apps, google maps, and the damn time is always wrong. :crying: Does anyone know what steps need to be taken after the GPS calibration guide to have GPS working properly?
Click to expand...
Click to collapse
To be honest, one of two things MUST happen.... Either we get the source and the dev community fixes...or we are given firmware that works. In regards to the BT and GPS, I think this is gonna be about as good as it gets.
Sent from my HTC One using Tapatalk
mghtymse007 said:
To be honest, one of two things MUST happen.... Either we get the source and the dev community fixes...or we are given firmware that works. In regards to the BT and GPS, I think this is gonna be about as good as it gets.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Well the bluetooth is working great for me (thanks to all the developers on XDA who made that possible), and BT was the most important thing for me, so I can't complain. Of course, I wish Omate released a properly functioning product, but as a startup company, I do understand having these early issues.
sickysickybrah said:
Well the bluetooth is working great for me (thanks to all the developers on XDA who made that possible), and BT was the most important thing for me, so I can't complain. Of course, I wish Omate released a properly functioning product, but as a startup company, I do understand having these early issues.
Click to expand...
Click to collapse
I have to reset my headset a couple times a day. And my BT speaker has to be paired every time I use it. I don't have much need for the GPS, I feel the screen size hinders most of the apps I use.
Btw, It's not really Omate...the TS has many cousins....it's a combination of Umeox and MTK. Both parties have gotten dirty in this situation.
Sent from my HTC One using Tapatalk
Good to know about the BT. I have yet to test the BT connection to a wireless speaker/headphones for an extended period of time. There were some posts in the BT tether rom thread that stated that using just the Ensec security patch and not the BT tether rom gave a more stable BT connection.
sickysickybrah said:
Good to know about the BT. I have yet to test the BT connection to a wireless speaker/headphones for an extended period of time. There were some posts in the BT tether rom thread that stated that using just the Ensec security patch and not the BT tether rom gave a more stable BT connection.
Click to expand...
Click to collapse
I'm using Operative. Super battery life...great 3G connection periods and signal. Stable and fast too. With all that the patch offers, I will live with the minor BT disconnects.
I wish that the onboard Mic/speaker get fixed. Without the headset, a SIM equipped TS is basically useless for calls. I've read that a few people have mentioned decent quality...but very few. I actually am quite surprised how bad the quality is for the caller. If needed tho, I found that if you cover the Mic while the caller is talking, this can reduce the echo and distortion.
Sent from my HTC One using Tapatalk
Pairing a bluetooth headset
Hi,
I got a kickstarter model from eBay, and updated / flashed the ROM to 20140115.153703_V2.0.
On my Bluetooth page, there is no 'Scanning' option to pair a headset.
I can pair the TS to a phone, but not TS to headset.
I have the Omate headset.
Is there a ROM or patch to allow pairing?
I have tethering wrking, but that is WiFi, and i have had the companion working also.
I am now using as a full phone (sim card) and calls are ok, but would really like to pair a headset.
Hello everybody!
Meet my first wear app - Watch Phone - just another dialer for Android Wear.
Unfortunately I can't post the link.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mod Edit: link removed
Looks great!
I purchased. Very good. By far the best I've seen. Good application. Smartwatch Sony 3.
Enviat des del meu D6603 usant Tapatalk
Thank you! Very pleasure for me! I plan to develop new features for this app in further updates.
This looks very nice, but I have a general question. What is the advantage of using a phone dialer on an Android Wear watch? Since there's no speaker, so you can't have a phone conversation on the watch and would have to dig out your phone anyway. I guess you could dial a call and talk on your Bluetooth headset, but I use voice dialing for that.
JimSmith94 said:
This looks very nice, but I have a general question. What is the advantage of using a phone dialer on an Android Wear watch? Since there's no speaker, so you can't have a phone conversation on the watch and would have to dig out your phone anyway. I guess you could dial a call and talk on your Bluetooth headset, but I use voice dialing for that.
Click to expand...
Click to collapse
Thanks
Good question. I wrote it to use with Bluetooth headset because voice dialing does not work cleanly for me for some reason (often call a wrong number). Also I don't like persuade my phone to make a call in a public place with my voice. I want simple choose a contact from the list When the phone is hidden under outer clothing (winter) or in a bag it's very convenient to make call with watch (as for me).
AIexandr said:
Thanks
Good question. I wrote it to use with Bluetooth headset because voice dialing does not work cleanly for me for some reason (often call a wrong number). Also I don't like persuade my phone to make a call in a public place with my voice. I want simple choose a contact from the list When the phone is hidden under outer clothing (winter) or in a bag it's very convenient to make call with watch (as for me).
Click to expand...
Click to collapse
Ah, that makes good sense, thanks! I also have some contacts and businesses that voice dialing doesn't work well for. I just bought it and here's the link, in case others are having trouble finding it: Mod Edit: link removed
JimSmith94 said:
Ah, that makes good sense, thanks! I also have some contacts and businesses that voice dialing doesn't work well for. I just bought it and here's the link, in case others are having trouble finding it:
Click to expand...
Click to collapse
Thank you! :good:
So far so good! Any chance you could add a way to distinguish which number is which for contacts with multiple numbers? Just H, M, and W for home, mobile, and work would be fine.
JimSmith94 said:
So far so good! Any chance you could add a way to distinguish which number is which for contacts with multiple numbers? Just H, M, and W for home, mobile, and work would be fine.
Click to expand...
Click to collapse
Of course! Will be in the next update.
AIexandr said:
Of course! Will be in the next update.
Click to expand...
Click to collapse
You did it man, many thanks! I haven't played with it much yet, but it seems that if I click on a contact and then swipe it away, it goes back to the beginning of the list instead of where I was in the scroll. In other words, if I look at a Smith and swipe it away, I'm back at Adams instead of Smith. I don't know if that can be fixed or not. Overall, it's great!
Good update!!!
Enviat des del meu D6603 usant Tapatalk
JimSmith94 said:
You did it man, many thanks! I haven't played with it much yet, but it seems that if I click on a contact and then swipe it away, it goes back to the beginning of the list instead of where I was in the scroll. In other words, if I look at a Smith and swipe it away, I'm back at Adams instead of Smith. I don't know if that can be fixed or not. Overall, it's great!
Click to expand...
Click to collapse
You're welcome, that was not too hard Thanks again!
I'll try to solve the problem with return to contacts list as soon as possible, actually I'm already thinking about it because it annoys me too)
Nice look! Purchased! One thing to note, I don't seem to be able to sync the call log from my Motorola Droid Turbo to my Moto 360. The colored wheel just spins. I even cleared my call log but no change. Still, a nice looking app!
dbeedle said:
Nice look! Purchased! One thing to note, I don't seem to be able to sync the call log from my Motorola Droid Turbo to my Moto 360. The colored wheel just spins. I even cleared my call log but no change. Still, a nice looking app!
Click to expand...
Click to collapse
Thanks for purchase and sorry for bug! I'll try to reproduce it and fix as soon as possible!
It seems this bug is reproduced rarely (on my device) when you come to the call log activity or to the contacts/favs activity for the first time. I'm working on this watch->phone connectivity issue now. I hope to solve it at next weekend.
A minor update will be available tomorrow which is mostly dedicated to tablets support.
AIexandr said:
It seems this bug is reproduced rarely (on my device) when you come to the call log activity or to the contacts/favs activity for the first time. I'm working on this watch->phone connectivity issue now. I hope to solve it at next weekend.
A minor update will be available tomorrow which is mostly dedicated to tablets support.
Click to expand...
Click to collapse
I've noticed that myself from time to time. Sometimes when I first start the app, none of the buttons respond. If I close and reopen they work fine. Maybe it's just a delay pulling the data from the phone.
JimSmith94 said:
I've noticed that myself from time to time. Sometimes when I first start the app, none of the buttons respond. If I close and reopen they work fine. Maybe it's just a delay pulling the data from the phone.
Click to expand...
Click to collapse
Yes, exactly. This is due to Bluetooth slow speed + sometimes reconnection between the watch and the phone. When a reconnection occurs it seems I may loose data so you need to reopen activity. But I hope to fix it soon.
PS It's late night here so I'm going sleep right now, bye
With this app, i can speak trought my wear device during a call?
I have managed to connect my iPhone 6 to my LG G watch with a custom ANCS.apk (thx to @shiitakeo online example code) for watch and ANCS.app for iPhone it sends notifications to the G watch from iPhone 6 in real time with vibrate. A lot of work still needs to be done. Is anyone with Android Dev/Bluetooth experience willing/wanting to help me with this? I need some help ASAP. Comment or Mesg me [email protected] if interested.
@shiitakeo released his alpha APK https://twitter.com/shiitakeo/status/575713237091516416
yeah progress!
Shiitakeo's apk works good so far so I removed mine for now.
Guide
Down load the alpha apk wear_ios https://twitter.com/shiitakeo/status/575713237091516416
Install android SDK on your computer https://developer.android.com/sdk/installing/index.html?pkg=tools
Use adb to install the alpha apk. http://m.youtube.com/watch?v=xdR4VVHHU-8
Download LightBlue - Bluetooth Low Energy by Punch Through
https://appsto.re/ca/o2AoH.i
Open settings on both the watch and the iPhone and click forget Bluetooth device for iPhone and watch for both in both.
Open light blue on iPhone make an blank peripheral don't add anything then check the box to turn it on.
Open wear_ios on the watch and wait for them to auto connect then keep waiting till it asked for a code to pair iPhone, enter the code with iPhone and wait until it finishes connecting.
Working/bugs
Shiitakeo alpha apk info - ver1.0
Auto Connects and pairs with pairing code to iPhone
Notifications are sent threw ANCS GATT
Notifications work on watch
Notification icons for common apps work
Connects both Android + iPhone same time then the watch has full networking and Google now etc.. but then two phones
Some users have random disconnects every 2hrs
Have to forget and re-pair Bluetooth sometimes
Not able to reply to notifications or calls
Not able to use apps that use networking
No networking for voice commands
No Siri on watch
If your having disconnect issues try reset the watch to factory then install only the alpha from @shiitakeo https://twitter.com/shiitakeo/status/575713237091516416 and try again you can't be using another ancs.APK on the watch just @shiitakeo apk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Reserved for project
Hi there @iAppleDev!
First of all let me congratulate you for being the first dev to provide a beta for achieving the impossible!
You are writing history.
I know that XDA member @MohammadAG and twitter member @shiitakeo are working on their own solutions as well.
I am offering my help as a beta tester - just not right away because i have no Android Wear watch at the moment, but i intend to purchase one ASAP.
Some questions:
1) Is there an app for the iPhone? The download link you provide only points at an .apk for the watch.
2) Does the iPhone need to be JB?
3) Which Android Wear watch would you suggest?
Thank you very much for your great work.
Can you provide the source code?
gidi said:
Hi there @iAppleDev!
First of all let me congratulate you for being the first dev to provide a beta for achieving the impossible!
You are writing history.
I know that XDA member @MohammadAG and twitter member @shiitakeo are working on their own solutions as well.
I am offering my help as a beta tester - just not right away because i have no Android Wear watch at the moment, but i intend to purchase one ASAP.
Some questions:
1) Is there an app for the iPhone? The download link you provide only points at an .apk for the watch.
2) Does the iPhone need to be JB?
3) Which Android Wear watch would you suggest?
Thank you very much for your great work.
Click to expand...
Click to collapse
Yes you need an app on the iPhone to advertise the phone ANCS, light blue, BLE utility, custom, etc...
No jailbreak needed.
Which ever you like best
FearL0rd said:
Can you provide the source code?
Click to expand...
Click to collapse
Not yet, but I should be able to very soon. I need to work out a few things first.
thx
iAppleDev said:
Yes you need an app on the iPhone to advertise the phone ANCS, light blue, BLE utility, custom, etc...
No jailbreak needed.
Which ever you like best
Click to expand...
Click to collapse
I guess even the Pebble app would do, right?
Could you please provide some info about what is working/not working?
Thank you again sir.
Android Wear & iOS (((DevHelpNeeded)App)Beta)
Light blue app with a blank peripheral and shiitakeo 's apk and this beta apk seems to work
Any known bugs?
What we get is notifications, right?
Is there a chance that maybe in some future release we can use Google Now?
Android Wear & iOS (((DevHelpNeeded)App)B...
No pebble app don't work, I will keep the first post updated. Maybe Siri but hey anything is possible Google is said to be working on this to so I'm sure if when they do they will include Google Now
Not sure what's going on with the title of this thread, but everyday another "amp;" gets added to it.
Android Wear & iOS (((DevHelpNeeded)A...
Click to expand...
Click to collapse
hey, shouldn't the exact same thing be possible for Windows and Windows Phone Phone, using the correct Apis? Or am I mistaken? I mean.. that would be awesome.
JimSmith94 said:
Not sure what's going on with the title of this thread, but everyday another "amp;" gets added to it.
Click to expand...
Click to collapse
Yeah I've fixed it a bunch a time it just don't like (((wear)iOS)stuff) !
Maybe this time?lol
iAppleDev said:
Maybe this time?lol
Click to expand...
Click to collapse
Yes, it looks "normal" now, thanks!
Nice! I look fwd to your efforts.
Im not an android dev but I quickly dove in yesterday to see if I could use @shiitakeo's alpha on my LG G Watch R. It works sporadically but it's encouraging that It's possible to do. I love the G Watch R, just bought one for my birthday, but I'm a core iphone user, so I installed Android 4.4 R2 as a parallels virtual machine in order to initialize my G Watch. That's better (and freer lol) than having to buy a smartphone just because I like a watch!
Note: of course I will be getting the apple watch!!! But I'm sort of a smartwatch afficionado (good ones that is). I have the 6th Gen Nano, a pebble, and the G Watch came just in time before I decided on getting a Moto 360. One thing I wont do, however, is own two android smartwatches simultaneously. or for that matter, two of the same experience.
Ok Im done talking!
I'll beta test for you if itd help. I'm subscribed to this thread.
Live long and prosper.
iAppleDev said:
Maybe this time?lol
Click to expand...
Click to collapse
Oops, it's doing it again!
JimSmith94 said:
Oops, it's doing it again!
Click to expand...
Click to collapse
Weird maybe this time it will stay as I wrote the dang thing and not stay for awhile but then change to amp amp amp s*** again.
iAppleDev said:
I have managed to connect my iPhone 6 to my LG G watch with a custom ANCS.apk (thx to @shiitakeo online example code) for watch and ANCS.app for iPhone it sends notifications to the G watch from iPhone 6 in real time with vibrate. A lot of work still needs to be done. Is anyone with Android Dev/Bluetooth experience willing/wanting to help me with this? I need some help ASAP. Comment or Mesg me [email protected] if interested.
@shiitakeo released his alpha APK https://twitter.com/shiitakeo/status/575713237091516416
yeah progress!
Shiitakeo's apk works good so far so I removed mine for now.
Guide
Down load the alpha apk wear_ios https://twitter.com/shiitakeo/status/575713237091516416
Install android SDK on your computer https://developer.android.com/sdk/installing/index.html?pkg=tools
Use adb to install the alpha apk. http://m.youtube.com/watch?v=xdR4VVHHU-8
Download LightBlue - Bluetooth Low Energy by Punch Through
https://appsto.re/ca/o2AoH.i
Open settings on both the watch and the iPhone and click forget Bluetooth device for iPhone and watch for both in both.
Open light blue on iPhone make an blank peripheral don't add anything then check the box to turn it on.
Open wear_ios on the watch and wait for them to auto connect then keep waiting till it asked for a code to pair iPhone, enter the code with iPhone and wait until it finishes connecting.
Working/bugs
Shiitakeo alpha apk info - ver1.0
Auto Connects and pairs with pairing code to iPhone
Notifications are sent threw ANCS GATT
Notifications work on watch
Notification icons for common apps work
Connects both Android + iPhone same time then the watch has full networking and Google now etc.. but then two phones
Some users have random disconnects every 2hrs
Have to forget and re-pair Bluetooth sometimes
Not able to reply to notifications or calls
Not able to use apps that use networking
No networking for voice commands
No Siri on watch
If your having disconnect issues try reset the watch to factory then install only the alpha from @shiitakeo https://twitter.com/shiitakeo/status/575713237091516416 and try again you can't be using another ancs.APK on the watch just @shiitakeo apk
Click to expand...
Click to collapse
Thanx for the update!
Today I received my Freebuds 2 Pro from China (I'm swiss). Everything seems to work well with my Mate 20 Pro, but I can't see any evidence HWA codec is getting used. In developer options, just SBC and AAC can be selected, it's on AAC on default, and pressing the "Enable additional codecs" doesn't do anything. The HWA-related stuff stays greyed out, and yes, I'm connected to the earphones and I'm playing stuff.
On the few english pages I could find around, the product description states this: "Only compatible with EMUI 9.0 or above phones which support HWA , need to turn on high quality music key". Alright, but where is this key supposed to be found? It's just to be found on chinese firmwares? Or am I just missing something? The manual, available on the chinese Huawei site and including english, doesn't tell anything about HWA or how to enable it.
try to use Fiio music player, there is separate HWA on/off switch embedded in the player. try and see if that works
Fafner76 said:
Today I received my Freebuds 2 Pro from China (I'm swiss). Everything seems to work well with my Mate 20 Pro, but I can't see any evidence HWA codec is getting used. In developer options, just SBC and AAC can be selected, it's on AAC on default, and pressing the "Enable additional codecs" doesn't do anything. The HWA-related stuff stays greyed out, and yes, I'm connected to the earphones and I'm playing stuff.
On the few english pages I could find around, the product description states this: "Only compatible with EMUI 9.0 or above phones which support HWA , need to turn on high quality music key". Alright, but where is this key supposed to be found? It's just to be found on chinese firmwares? Or am I just missing something? The manual, available on the chinese Huawei site and including english, doesn't tell anything about HWA or how to enable it.
Click to expand...
Click to collapse
what's your emui version? i think hwa works on 171, I remember reading it somewhere in huawei forum.
rakesh2002 said:
what's your emui version? i think hwa works on 171, I remember reading it somewhere in huawei forum.
Click to expand...
Click to collapse
I'm still on B153, no 171 so far in Europe. I'll try the suggested music player today.
I'm interested as well, please keep us informed
turt said:
I'm interested as well, please keep us informed
Click to expand...
Click to collapse
No noticeable sound improvements enabling HWA on that app, it's unclear if it does in fact really enable HWA or not, no apparent signs of it being used looking at Bluetooth settings while playing stuff with it. Let's see what the newest firmware brings (still not available here in Switzerland).
Fafner76 said:
No noticeable sound improvements enabling HWA on that app, it's unclear if it does in fact really enable HWA or not, no apparent signs of it being used looking at Bluetooth settings while playing stuff with it. Let's see what the newest firmware brings (still not available here in Switzerland).
Click to expand...
Click to collapse
I booked a HF2P as soon as I saw this https://forum.xda-developers.com/mate-20-pro/themes/freebuds-2-companion-t3888654
I just needed a confirmation that HWA works on 171. Also don't invest on DACs because M20P supports almost all BT codecs, wait for 171 update.
Once I receive the product, I will give my reviews.
Thanks.
You can activate it on the Bluetooth connection part.
I only got the flypods pro, but they are almost the same. My freebuds 2 pro are on the way [emoji41]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Gesendet von meinem CLT-L29 mit Tapatalk
Fafner76 said:
Today I received my Freebuds 2 Pro from China (I'm swiss). Everything seems to work well with my Mate 20 Pro, but I can't see any evidence HWA codec is getting used. In developer options, just SBC and AAC can be selected, it's on AAC on default, and pressing the "Enable additional codecs" doesn't do anything. The HWA-related stuff stays greyed out, and yes, I'm connected to the earphones and I'm playing stuff.
On the few english pages I could find around, the product description states this: "Only compatible with EMUI 9.0 or above phones which support HWA , need to turn on high quality music key". Alright, but where is this key supposed to be found? It's just to be found on chinese firmwares? Or am I just missing something? The manual, available on the chinese Huawei site and including english, doesn't tell anything about HWA or how to enable it.
Click to expand...
Click to collapse
Where did you order them from?
x2srj said:
Where did you order them from?
Click to expand...
Click to collapse
Got them from Joybuy.com
rakesh2002 said:
I booked a HF2P as soon as I saw this https://forum.xda-developers.com/mate-20-pro/themes/freebuds-2-companion-t3888654
I just needed a confirmation that HWA works on 171. Also don't invest on DACs because M20P supports almost all BT codecs, wait for 171 update.
Once I receive the product, I will give my reviews.
Thanks.
Click to expand...
Click to collapse
Yes, it's 100% the same. Flybuds and Freebuds have 99% the same software. The Flybuds got a few more updates. Since yesterday the freebuds, after an update, are nearly the same.
Can't wait to get the 171 update on my mate 20 pro.
Sent from my Mate 20 Pro using Tapatalk
MirageBlader said:
Yes, it's 100% the same. Flybuds and Freebuds have 99% the same software. The Flybuds got a few more updates. Since yesterday the freebuds, after an update, are nearly the same.
Can't wait to get the 171 update on my mate 20 pro.
Sent from my Mate 20 Pro using Tapatalk
Click to expand...
Click to collapse
I hope updates get deployed uniformly across all geographies. I heard that some are still on 118 and 126, and some are already on 184.
rakesh2002 said:
I hope updates get deployed uniformly across all geographies. I heard that some are still on 118 and 126, and some are already on 184.
Click to expand...
Click to collapse
Exactly, I hope so too. I am urgently waiting for the update because i hope it adds more features to the freebuds/Flybuds then just the HWA Options. For Europe, we should get a Januar Patch soon which will be 171 or higher.
Sent from my Mate 20 Pro using Tapatalk
MirageBlader said:
Exactly, I hope so too. I am urgently waiting for the update because i hope it adds more features to the freebuds/Flybuds then just the HWA Options. For Europe, we should get a Januar Patch soon which will be 171 or higher.
Sent from my Mate 20 Pro using Tapatalk
Click to expand...
Click to collapse
I understand.
btw January patch is 182, I am on 171 and it is December patch.
Let's hope that it comes soon. I have the guess that this Bone Voice ID settings in the settings App also comes with 171 and higher.
Same for the prompt which comes when you connect the headset (open the box).
That's how it looks like:
Sent from my Mate 20 Pro using Tapatalk
MirageBlader said:
Let's hope that it comes soon. I have the guess that this Bone Voice ID settings in the settings App also comes with 171 and higher.
Same for the prompt which comes when you connect the headset (open the box).
That's how it looks like:
Click to expand...
Click to collapse
I have 171 update on my mate 20 pro and i also have flypods. But still i didn't see this popup
charming.arpit said:
I have 171 update on my mate 20 pro and i also have flypods. But still i didn't see this popup
Click to expand...
Click to collapse
Then it must be a Chinese only thing. I saw multi people posting this on Chinese forums and it works for them.
It's a shame we did got this. Maybe someone can make a customs app for it, I can bring the UI elements. Coding isn't my strength.
Sent from my LYA-L29 using Tapatalk
LYA-L29 global mate 20 pro
9.0.0.198 emui
1.0.0.136 freebuds 2 pro
I finally got the pop-up/prompt that displays the battery status of the case and the earbuds when the earbuds connect.
Dunno how i got it but what i did is:
Settings>apps>apps>3 dots>show system processes>search for bluetooth>storage>clear data and clear cache