I'M NOT RESPONSIBLE FOR ANY DAMAGE AND/OR DATA LOSS AS A RESULT OF FLASHING THIS ROM !!!
PLEASE PERFORM FULL BACKUP IN THE MICRO SD CARD OR IN AN EXTERNAL STORAGE BEFORE YOU TRY !!!
Do you need reliability and predictability? Then better stay with THIS ROM
I have decided to create a separate thread because:
- I would like to distinguish PIE BETA bug reports from my normal (OREO stable) thread, mentioned above
- It is normal that there will be definitely much more "bad reports" here, because most of them will be "beta related"
This thread will be closed when Samsung will release stable Android Pie (One UI)
Everything you will need to know about DevBase ROM in general - you will find in my stable thread (mentioned above)
Differences comparing to stable Oreo DevBase ROM:
- No Xposed (we need to wait for rovo89)
S8 (SM-G950F/FD):
>> G950FXXU4ZSB9_DevBase_v6.0.zip << (MEGA)
>> G950FXXU4ZSB9_DevBase_v6.0.zip << (AFH)
Click to expand...
Click to collapse
S8+ (SM-G955F/FD):
>> G955FXXU4ZSB9_DevBase_v6.0.zip << (MEGA)
>> G955FXXU4ZSB9_DevBase_v6.0.zip << (AFH)
Click to expand...
Click to collapse
Dirty flash over my Oreo DevBase ROM SHOULD WORK WITHOUT ISSUES but before you try - I would highly recommend you to set default (stock) theme and default (stock) icons !!! However - I would recommend you clean install (Wipe -> Swipe to Factory Reset is enough).
Please REMOVE custom options.prop file if you have any in /sdcard or external sdcard (mainly because of debloat list which causes more issues in Pie).
Known problems:
- [CLEAN INSTALL] Magisk Manager may not appear after clean install despite Magisk has been installed without errors during install - if you notice that there is no Magisk Manager - DO NOT flash Magisk, it is enough to install Magisk Manager as normall app - use ATTACHMENT (it is original apk from Magisk v18.1) and then reboot device (important!!!)
- OEM unlock toggle seems to be disabled in the Developer Options but it is not true (otherwise you would not be able to use TWRP and this ROM). It is side effect of protection I put in the kernel against "KG State: Prenormal" in the DM mode. It is not real issue, just ignore it. EDIT: starting from ZSAC - OEM unlock toggle has been HIDDEN to avoid further confusion! Don't worry about that
SafetyNet PASS in this ROM
Thanks to:
- @corsicanu, @piyushkohli97 & @OnikdudeX for share untouched G950F dump
- @cobrax05 & @Leejhay1714 for share untouched G955F dump
- all persons mentioned in my main thread
Testing Now.
Could anyone upload to another server?Coz I downloaded other file from mega and it says bandwith limit exceeded.I have to wait 4hrs...
edweder said:
Could anyone upload to another server?Coz I downloaded other file from mega and it says bandwith limit exceeded.I have to wait 4hrs...
Click to expand...
Click to collapse
I will upload it to AFH, stay tuned
EDIT: Done
_alexndr said:
I will upload it to AFH, stay tuned
Click to expand...
Click to collapse
Thank youuu :good:
This is what im waiting for, devbase ?% stock thanks a lot
Sir give us pie for s8??
So after samsung release stable pie, you will make new thread?
Waiting for the S8
ROM has been re-uploaded - removed "There's an internal problem with your device" popup at start (thanks to @corsicanu for the tip)
Ogy77 said:
Sir give us pie for s8??
Click to expand...
Click to collapse
Kirazz said:
Waiting for the S8
Click to expand...
Click to collapse
I need a dump (does anybody have a link?) or help from an experienced user who can update his phone with OTA update.zip, then make the dump (I can send detailed instruction via PM)
_alexndr said:
ROM has been re-uploaded - removed "There's an internal problem with your device" popup at start (thanks to @corsicanu for the tip)
I need a dump (does anybody have a link?) or help from an experienced user who can update his phone with OTA update.zip, then make the dump (I can send detailed instruction via PM)
Click to expand...
Click to collapse
I wonder if the one from this thread works? link
_alexndr said:
ROM has been re-uploaded - removed "There's an internal problem with your device" popup at start (thanks to @corsicanu for the tip)
I need a dump (does anybody have a link?) or help from an experienced user who can update his phone with OTA update.zip, then make the dump (I can send detailed instruction via PM)
Click to expand...
Click to collapse
Same downlink in the first page?
---------- Post added at 05:15 PM ---------- Previous post was at 05:14 PM ----------
Dirty flash will be fine?
I did, no problem.
_alexndr said:
ROM has been re-uploaded - removed "There's an internal problem with your device" popup at start (thanks to @corsicanu for the tip)
I need a dump (does anybody have a link?) or help from an experienced user who can update his phone with OTA update.zip, then make the dump (I can send detailed instruction via PM)
Click to expand...
Click to collapse
Am I assuming right that we can dirty flash the 'fixed' ROM?
Apart from that, I have another request: Could you maybe include a script into your ROMs that when I dirty flash it detects what apps I deleted from system and not restore them?
Gesendet von meinem SM-G955F mit Tapatalk
_alexndr said:
I need a dump (does anybody have a link?) or help from an experienced user who can update his phone with OTA update.zip, then make the dump (I can send detailed instruction via PM)
Click to expand...
Click to collapse
I can help, pm me the instructions...
xPr0metheus said:
Am I assuming right that we can dirty flash the 'fixed' ROM?
Apart from that, I have another request: Could you maybe include a script into your ROMs that when I dirty flash it detects what apps I deleted from system and not restore them?
Gesendet von meinem SM-G955F mit Tapatalk
Click to expand...
Click to collapse
Yes, you can dirty flash fixed rom over previous
About your request - there is the solution already included in the ROM - just extract options.prop form ROM's zip, then edit it according to your needs (add your favorite removal list to physical debloat section), then place your custom options.prop file in the root directory of /sdcard (or in external SD card if your data are encrypted). When installer will find a custom options.prop in one of mentioned locations (/sdcard or external microSD card) - it will use YOUR file instead of default file (included in ZIP)
piyushkohli97 said:
I can help, pm me the instructions...
Click to expand...
Click to collapse
Thanks Check PM
Thank u
Oem toggle is off cannot on
_alexndr said:
ROM has been re-uploaded - removed "There's an internal problem with your device" popup at start (thanks to @corsicanu for the tip)
I need a dump (does anybody have a link?) or help from an experienced user who can update his phone with OTA update.zip, then make the dump (I can send detailed instruction via PM)
Click to expand...
Click to collapse
I can help with that.
_alexndr said:
Thanks Check PM
Click to expand...
Click to collapse
Uploaded, check your PM for the link.
Thread has been updated for S8 (G950F) users
(thanks to @piyushkohli97 for the dump)
Iyaadali said:
Thank u
Oem toggle is off cannot on
Click to expand...
Click to collapse
I thought it is enough to explain it in post #1 but seems like it isn't
OEM unlock toggle will be hidden in the next release for G955F to avoid confusion (it is done already in just uploaded DevBase for G950F). Of course, it can be easy un-hidden in any time, but for what? To see it seemingly disabled? (it just displays wrong state)
Related
Simple, Stable, Smooth...
I am not a developer, I have learnt (and am still learning) many things from the immensely talented developers on this Forum.
This Rom has been created with the thought that there are many people who wish to continue with Samsung Stock Rom to give them a hassle-free use of their Smartphone, yet they need their Rom to be bloatfree, efficient and Smooth.
This ROM is rooted and deodexed for my daily use. Will try to keep the version updated as and when a new stock firmware (with higher/better changelog) is released for the Galaxy S5 (G900H) version.
Please do not expect me to customise this ROM any more than what it is. As I said I am not a Developer. Thanks for Understanding.
Only for G900H (Exonys Variant)
DISCLAIMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards. YOU are choosing to make these modifications on your phone and you are solely responsible for your actions.
Enjoy/Share the Rom and hit Thanks, if you like it.
Base Firmware (v9)
Model SM-G900H
Model name GALAXY S5
Country Iraq
Version Android 5.0
Changelist 5501496
Build date Wed, 29 Jul 2015 03:40:38 +0000
Product code MID
PDA G900HXXU1BOG6
CSC G900HOJV1BOG2
Features(Lite)
•Latest Firmware for G900H - BOG6
•Deodexed
•Zipaligned
•Rooted (Supersu 2.49)
•BusyBox
•Init.d scripts support
•Debloated
•Knox Fully Removed
Download link:
Zephyr Version 9 (Deodexed Version)
Zephyr_v9_Deodexed_BOG6
https://mega.nz/#F!lM4XSLwC!mgCUeSyThgLrPnB10orVtA
Size: 700 MB (Folder includes latest Bootloader and Modem, Please flash them after clean installing the rom first)
https://www.androidfilehost.com/?fid=24052804347798891
Size: 700.9 MB (md5: 098cde607a13d8c9d97bb96d965c11d1)
Androidfilehost
Modem - MDM10.tar.md5
https://www.androidfilehost.com/?fid=24052804347798889
Size: 15.3 MB (md5: d88375cbfdcebddc7f7105815defca4d)
Bootloader - BTL10.tar.md5
https://www.androidfilehost.com/?fid=24052804347798888
Size: 1.1 MB (md5: 4a723263afaa65cc9076a1371d085a56)
Add on Pack for Zephyr 9
Zephyr_v9_Addons_Deodexed.zip (112.4mb)
https://mega.nz/#!YJQXAQTQ!2OD7-fug8Xc5uo79vBw3xPdHoZ_0OAL6gwF7At0tDoo
Changelog v9 -
Lollipop
Deodexed (Fully ART) - A clean install is required for installing this rom
Installation Instructions:
- Make sure you install the BOG6 Bootloader/Modem (For more information check Post #2
- Copy the Zip to your Phone Memory (Check md5 checksum)
- Use Latest recovery - TWRP by @MOKIAAA recommended
- Backup your existing rom
- Format System
- Wipe Data
- Wipe Cache
- Wipe Dalvik Cache
- Install Rom
- Install Add-ons
- Reboot
- Enjoy
First Boot shall take a long time(At least 10-15 minutes)
Note :
Clean Install
Please take an EFS backup and a nandroid backup before installing.
Inspiration &Thanks to:
@sammobile @dsixda
@Yank555
@sotmax
@zoot1 @Lord Boeffla @Chainfire
@temasek @rovo89 @Perka @JustArchi (for his amazing ArchiKitchen)
@edgarf28
@amarullz for amazing tool Aroma
@svadev for his SVADeodexerForArt
@Nikhil & @RajatPatel for their incredible tool Android Flashable Zip Creator
And to all others who have helped me along the way...
BOOTLOADER/MODEM Package
Already included in the rom folder
Install Instructions:
" Source/credits: @edgarf28 "
For the latest version, would suggest you flash rom first(if you are already on Lollipop) via recovery. Flash Bootloader and Modem via odin after flashing the rom.
This procedure can be done anytime and it won't wipe anything from your device! Your current ROM, Kernel & Recovery will remain the same after you flash this.
Do exactly as mentioned:
- Make sure you have downloaded the correct packages
- Switch off your phone completely (This is IMPORTANT)
- Wait for 30 seconds
- Start your Phone in download mode: Press Vol down + Home + Power buttons till the screen turns on, press Vol Up to continue (Only enter download mode on this way, otherwise it won't work!!)
- Connect your phone to your computer
- Open Odin 3.09 on your PC (Older versions won't work correctly!)
- Click on the 'BL' button, and load in your BOOTLOADER tar.md5 file
- Click on the 'CP' button, and load in your MODEM tar.md5 file
- DON'T TOUCH ANYTHING ELSE (you can brick your phone if you choose other settings in Odin)
- Click on the Start button
- Wait till it finish flashing.
- Your phone reboots automatically after flashing.
- Always check after flashing: Settings -> About device -> Baseband; that should show you the same modem build number noted as here.
And also check if the bootloader got flashed correctly by downloading an AndroidTerminal app, and enter this command: getprop ro.boot.bootloader
NOTE: Sometimes the modem/baseband needs to be flashed 2 or even 3 times till it will get flashed correctly.
One more
Finally A Rom For G900H
Finally!!
please tell me selinux is permissive in this rom...or just tell me how to change selinux mod
mahir1010 said:
please tell me selinux is permissive in this rom...or just tell me how to change selinux mod
Click to expand...
Click to collapse
Selinux is not set to Permissive. You could try to change it with selinuxmodechanger_v1.2.apk from xda forum
manojpy said:
Selinux is not set to Permissive. You could try to change it with selinuxmodechanger_v1.2.apk from xda forum
Click to expand...
Click to collapse
first of all a big thanks to you for releasing outa new rom exclusively for octa core variant :good::good::good:
and second what can i do after changing selinux status will it give a performance boost or something ??
and third just asking as you have stated that it is deodexed then why is it 983 mb in size and not small like sterolite rom which is lik e450 mb in size
no offence just asking and i am not making any comparison
manojpy said:
Selinux is not set to Permissive. You could try to change it with selinuxmodechanger_v1.2.apk from xda forum
Click to expand...
Click to collapse
i know about that app i already tried it as it says in the description the app doesn't work with Samsung devices even if knox is removed but thats alright i cant complaint about it at least we have a rom now
---------- Post added at 07:40 PM ---------- Previous post was at 07:37 PM ----------
sharingan said:
first of all a big thanks to you for releasing outa new rom exclusively for octa core variant :good::good::good:
and second what can i do after changing selinux status will it give a performance boost or something ??
Click to expand...
Click to collapse
no it just helps running some root apps which doesn't work with selinux enforcing i don't know much about it
mahir1010 said:
i know about that app i already tried it as it says in the description the app doesn't work with Samsung devices even if knox is removed but thats alright i cant complaint about it at least we have a rom now
---------- Post added at 07:40 PM ---------- Previous post was at 07:37 PM ----------
no it just helps running some root apps which doesn't work with selinux enforcing i don't know much about it
Click to expand...
Click to collapse
thanks bro i get it now
sharingan said:
first of all a big thanks to you for releasing outa new rom exclusively for octa core variant :good::good::good:
and second what can i do after changing selinux status will it give a performance boost or something ??
and third just asking as you have stated that it is deodexed then why is it 983 mb in size and not small like sterolite rom which is lik e450 mb in size
no offence just asking and i am not making any comparison
Click to expand...
Click to collapse
I have not faced any root issue on the Selinux enforced mode. Device with knox security do face problem changing to Permissive. Am not qualified to try it too.
I was also using the rom you mentioned and he has done a wonderful job. Edgar's rom is bare bones with add on package. I feel the basic features that Samsung has given should be there and hence have removed only the absolute unnecessary files. Try it and let me know your views. No offence taken at all[emoji6]
manojpy said:
I have not faced any root issue on the Selinux enforced mode. Device with knox security do face problem changing to Permissive. Am not qualified to try it too.
I was also using the rom you mentioned and he has done a wonderful job. Edgar's rom is bare bones with add on package. I feel the basic features that Samsung has given should be there and hence have removed only the absolute unnecessary files. Try it and let me know your views. No offence taken at all[emoji6]
Click to expand...
Click to collapse
thanks bro
no doubt i wil try and post my review
once again i have to say nice work
:good::good::good:
Good Job mate :good::good::good:
Keep up the good work !!! :good::good::angel:
lucky_sidhu said:
Good Job mate :good::good::good:
Keep up the good work !!! :good::good::angel:
Click to expand...
Click to collapse
Thanks Paaji
Hi dude
nice job ... :good:
how did you removed knox ?
I guess you have downgraded bootloader or ...
1 - is there any way to flash that bootloader to a stock rom to remove knox ?
2 - is there any way to make knox 0 and dont remove it totally ?
(I tell that becase of this please read : http://forum.xda-developers.com/showthread.php?t=2740340&page=1)
Great work.....
Highly appreciated...:good:
and one more thing what are the changes you made in this ROM any improved battery life
and which Kernel and MOD's
one last thing try to port other ROM's feature in ya next update like AllianceROM or OMEGA ROM
if you need help regrading testing and debugging i can help you with it
you made G900H users proud
keep your work alive
Hello. Thank you for your rom, but it doesn't work for me ._. I did as you told in instructions. Used CWM and Philz wiped/formated and nothing, it just stucks on Samsung GALAXY S5 Powered by Android screen. I tried flashing couple of times, same result. And yes I got g900h model. Any help apretiated.
P.S. I checked md5sum, it's exact as in your post
safereg said:
Hi dude
nice job ... :good:
how did you removed knox ?
I guess you have downgraded bootloader or ...
1 - is there any way to flash that bootloader to a stock rom to remove knox ?
2 - is there any way to make knox 0 and dont remove it totally ?
(I tell that becase of this please read : http://forum.xda-developers.com/showthread.php?t=2740340&page=1)
Click to expand...
Click to collapse
Thanks. Knox has been removed while cooking the Rom itself (using Archikitchen).
No bootloader has not been downgraded. As of now once you trip knox it cannot be reset.
Sent from my SM-G900H using Tapatalk
Shindsu said:
Hello. Thank you for your rom, but it doesn't work for me ._. I did as you told in instructions. Used CWM and Philz wiped/formated and nothing, it just stucks on Samsung GALAXY S5 Powered by Android screen. I tried flashing couple of times, same result. And yes I got g900h model. Any help apretiated.
P.S. I checked md5sum, it's exact as in your post
Click to expand...
Click to collapse
Are you coming from NG3 to flash this rom. If not, please flash the Ng3 bootloader first using ODIN and then flash the zip (will add a note in OP). I have tested the installation process many times before uploading. Had no issues.
Sent from my SM-G900H using Tapatalk
9988338891 said:
Great work.....
Highly appreciated...:good:
and one more thing what are the changes you made in this ROM any improved battery life
and which Kernel and MOD's
one last thing try to port other ROM's feature in ya next update like AllianceROM or OMEGA ROM
if you need help regrading testing and debugging i can help you with it
you made G900H users proud
keep your work alive
Click to expand...
Click to collapse
Have not done any tweaking for battery but will definitely have better battery than stock I guess (let me know). Have only added the ad block feature. Cannot add features like alliance and Omega due to limited knowledge and also lack of time from work and personal life. You are free to use this as a base (credit will be appreciated) and take it to next level. I am offering my services as a tester. [emoji4]
Sent from my SM-G900H using Tapatalk
thanku
a heartly thanks to u dear @manojpy for ur great jobbb i wana try ur rom:good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::good::fingers-crossed:
---------- Post added at 10:14 AM ---------- Previous post was at 09:46 AM ----------
plzzzz!!! add call recording in call screen
I just can't wait for Google to upload an official Nougat image for our beloved Shamu, so I compiled this from the source.
V4 Flashable ZIP: https://mega.nz/#!qkpBHQwY!9fWIu36NCDtP4NXnTnWE_FblWlk9vrwNtDE13eJbocA
Obligatory screenshots: https://imgur.com/a/cXrnH
Working
As Shamu is a supported device, most things work well here:
Booting
Cellular (Calling, SMS and data)
Audio
Wi-Fi
Bluetooth
GApps (see below)
Easter egg
Not working (?)
Not working on Verizon, as reported here
There are probably more
GApps
This build has dm-verity enabled. With the stock kernel, GApps will not show up, or a warning is displayed when booting. To solve this, either use a custom kernel or use FED-Patcher.
After installing OpenGApps, you may encounter force closes during the Setup Wizard.
replica102 said:
You can just skip setup without editing the build.prop. Just tap on the four corners of the screen, starting from top left, clockwise. Do it right, and you'll get sent to home screen.
Click to expand...
Click to collapse
Afterwards, to get rid of the Play Services force closes, go to Settings > Apps > Three dot menu > Show system and find Google Play Services. Enter the Permissions menu and grant all the permission it needs.
If apps requiring WebView force close, try excluding "WebviewGoogle" using the gapps-config config file. Details are available here.
Sources
This build was compiled on a modified tree. See the changelog for details.
Vendor blobs are downloaded from https://developers.google.com/android/nexus/blobs-preview
Changelog
Code:
V4 - NRD90U - That's what I call "Useless"
Flashable ZIP: [url]https://mega.nz/#!qkpBHQwY!9fWIu36NCDtP4NXnTnWE_FblWlk9vrwNtDE13eJbocA[/url]
- Updated to 7.0.0_r6/NRD90U. So you want the shiny new build number? Here you go!
V3 - NRD90S
Flashable ZIP: [url]https://mega.nz/#!35Zl0QyY!gUYM79Fs_I6tm2RdEJw1v5S30qQqJ2RA1B3EosKlSqk[/url]
- Updated to 7.0.0_r4/NRD90S, with September's security updates.
V2 - NRD90M - A proper build... and more!
Flashable ZIP: [url]https://mega.nz/#!f4wSnTDL!3ifsV_qC_r-MJ-y45yDcwemkgTGY_jTr_OObHRktC-M[/url]
- The product name is now "Nexus 6" instead of the default "AOSP on Shamu". The modified device tree is available [URL="https://github.com/zhaofengli/device_moto_shamu"]here[/URL].
- The navigation bar editor is now accessible in System UI tuner. This is done by reverting [URL="https://android.googlesource.com/platform/frameworks/base/+/72195a011128d1c516149763c4c156539a470ed5"]this commit[/URL].
- I found out that I checked out the master branch for a handful of repositories when playing around. This is now fixed.
- This build was compiled with external/icu at [URL="https://android.googlesource.com/platform/external/icu/+/683055d9b50491dedbadea4e8ffb484e99e4f52b"]683055d[/URL] (the current master). This is to get RIL working.
- Developers: See [URL="http://forum.xda-developers.com/showpost.php?p=68556855&postcount=10"]this post[/URL] for a full explanation of the solution to get RIL working on 7.0.0_r1.
V1 - Initial build
Note: On a closer look, this is actually not a proper 7.0.0_r1 build. You should download V2 instead for a smoother experience.
Flashable ZIP: [url]https://mega.nz/#!K9YwGCJK!ezU_1dYTAOcCERletT-wK4demwI0-ZLRYiN4wrcXZLY[/url]
Mods: Please move this thread to the appropriate section if required.
Where did you get blobs from?
Kernel source?
Well done on being the first XD
neobuddy89 said:
Where did you get blobs from?
Kernel source?
Click to expand...
Click to collapse
Blobs are from https://developers.google.com/android/nexus/blobs-preview
And as said, I haven't changed the source in any way. Kernel source is available at https://android.googlesource.com/device/moto/shamu-kernel/+/android-7.0.0_r1
Edit: Wow, didn't look too closely. That's the prebuilt kernel, and the corresponding source hasn't been uploaded yet.
Zhaofeng Li said:
I just can't wait for Google to upload an official Nougat image for our beloved Shamu, so I compiled this from the 7.0.0_r1 source. I can't take any credit for it, as this is built using the built-in build target, and nothing more.
https://mega<dot>nz/#!K9YwGCJK!ezU_1dYTAOcCERletT-wK4demwI0-ZLRYiN4wrcXZLY
Mods: Please move this thread to the appropriate section if required. I don't have permission to post in the development sections yet.
Obligatory screenshots: https://imgur<dot>com/a/cXrnH
Edit: Added screenshot link
Click to expand...
Click to collapse
The mega link don't work.
serch826 said:
The mega link don't work.
Click to expand...
Click to collapse
Yes it does, you have to copy and paste but remove the <dot>
---------- Post added at 06:20 AM ---------- Previous post was at 06:11 AM ----------
Real question is, is this installed through factory recovery or can it be used through TWRP... Deff just tried TWRP and no success. will try flashing back to normal.
Twiggy000b said:
Yes it does, you have to copy and paste but remove the <dot>
---------- Post added at 06:20 AM ---------- Previous post was at 06:11 AM ----------
Real question is, is this installed through factory recovery or can it be used through TWRP... Deff just tried TWRP and no success. will try flashing back to normal.
Click to expand...
Click to collapse
I removed the <dot> but it doesn't work.
serch826 said:
Real question is, is this installed through factory recovery or can it be used through TWRP... Deff just tried TWRP and no success. will try flashing back to normal.
Click to expand...
Click to collapse
Installing via TWRP will show a couple of warnings about the missing "log" function, but should still succeed nevertheless.
Zhaofeng Li said:
I just can't wait for Google to upload an official Nougat image for our beloved Shamu, so I compiled this from the 7.0.0_r1 source. I can't take any credit for it, as this is built using the built-in build target, and nothing more.
https://mega<dot>nz/#!K9YwGCJK!ezU_1dYTAOcCERletT-wK4demwI0-ZLRYiN4wrcXZLY
Mods: Please move this thread to the appropriate section if required. I don't have permission to post in the development sections yet.
Obligatory screenshots: https://imgur<dot>com/a/cXrnH
Edit: Added screenshot link
Click to expand...
Click to collapse
looks like mega is having server issues... i got it though
---------- Post added at 06:28 AM ---------- Previous post was at 06:25 AM ----------
Zhaofeng Li said:
Installing via TWRP will show a couple of warnings about the missing "log" function, but should still succeed nevertheless.
Click to expand...
Click to collapse
the log shown was simulating actions and then went to success. let me try again
Twiggy000b said:
looks like mega is having server issues... i got it though
Click to expand...
Click to collapse
Thanx mate!
cerico76 said:
I removed the <dot> but it doesn't work.
Click to expand...
Click to collapse
i retract my last response lol, you also gotta put a "." between mega and nz lol mega is alive!
Thanks, will download and try asap!
EDIT: i guess it will encrypt the device?
Zhaofeng Li said:
I just can't wait for Google to upload an official Nougat image for our beloved Shamu, so I compiled this from the 7.0.0_r1 source. I can't take any credit for it, as this is built using the built-in build target, and nothing more.
https://mega<dot>nz/#!K9YwGCJK!ezU_1dYTAOcCERletT-wK4demwI0-ZLRYiN4wrcXZLY
Mods: Please move this thread to the appropriate section if required. I don't have permission to post in the development sections yet.
Obligatory screenshots: https://imgur<dot>com/a/cXrnH
Edit: Added screenshot link
Click to expand...
Click to collapse
Just curious why you're calling it "useless"?
Have you tested it at all, and if so, what works and what doesn't work?
Iirc, at the very minimum, you need to symlink vendor to system to get cellular connectivity working.
*edit*
Here is more info regarding the need for symlinking:
https://groups.google.com/forum/#!topic/android-building/Lru4hX8JOnc
https://github.com/CyanogenMod/android_build/commit/47aaaa704a56f37889a8b54498fbb7daf9a6de30
https://github.com/CyanogenMod/andr...ff93604#diff-78ec901c9c29ef6a20b79592fd93f941
Q9Nap said:
Just curious why you're calling it "useless"?
Have you tested it at all, and if so, what works and what doesn't work?
Iirc, at the very minimum, you need to symlink vendor to system to get cellular connectivity working.
*edit*
Here is more info regarding the need for symlinking:
https://groups.google.com/forum/#!topic/android-building/Lru4hX8JOnc
https://github.com/CyanogenMod/android_build/commit/47aaaa704a56f37889a8b54498fbb7daf9a6de30
https://github.com/CyanogenMod/andr...ff93604#diff-78ec901c9c29ef6a20b79592fd93f941
Click to expand...
Click to collapse
Thank you. Cellular connectivity is working, and the vendor blobs are present in the build. The exclamation mark on the screenshots are due to Google servers being blocked in China (which you can fix by changing the captive_portal_server global setting, in case if you are in the affected regions).
The reason I call it "useless" is that Google will likely get the official images out very soon, and this build will quickly become obsolete.
I will update the original post to include the test results.
Noob Question:
Where can I get the GApps file for this build?
Thanks!
edwaine said:
Noob Question:
Where can I get the GApps file for this build?
Thanks!
Click to expand...
Click to collapse
Use open gapps
Sent from my Nexus 6 using Tapatalk
Maybe my question got ovelooked because of an edited post but:
does the kernel force encrypt?
Thanks a lot!
Droidphilev said:
Maybe my question got ovelooked because of an edited post but:
does the kernel force encrypt?
Thanks a lot!
Click to expand...
Click to collapse
In twrp I wiped everything except internal storage. flasked. still have my files. So, no it does not force encrypt. Your welcome.
Zhaofeng Li said:
Thank you. Cellular connectivity is working, and the vendor blobs are present in the build. The exclamation mark on the screenshots are due to Google servers being blocked in China (which you can fix by changing the captive_portal_server global setting, in case if you are in the affected regions).
The reason I call it "useless" is that Google will likely get the official images out very soon, and this build will quickly become obsolete.
I will update the original post to include the test results.
Click to expand...
Click to collapse
So.. this probably force encrypts device, right?
Droidphilev said:
Maybe my question got ovelooked because of an edited post but:
does the kernel force encrypt?
Thanks a lot!
Click to expand...
Click to collapse
harpin14789 said:
So.. this probably force encrypts device, right?
Click to expand...
Click to collapse
Flash this after flashing the rom zip and you don't have to worry about it:
http://forum.xda-developers.com/and...-fed-patcher-v8-forceencrypt-disable-t3234422
Oneplus team has finally announced OxygenOS 3.5.5 (MM) OTA for OnePlus 2
Do not use the downgrade tool provided in the quote below, it is unstable and it destroys IMEI 2.
They are working on this bug.
Flashed OS 3.5.5 directly on H2OS 2.5 Beta by twrp recovery.
Everything works till now. i will report back soon.
Update 1 : Frequent network drops on both the sims.
Tony L. said:
We are starting the incremental roll-out of OxygenOS 3.5.5 for the OnePlus 2. Here are the changes for this build.
Here are some highlights:
Enabled VoLTE functionality for select carriers
Added App Lock
Added Battery Saving Mode ( Settings > Battery > More )
Added Gaming Mode ( Settings > Developer Options )
Added Additional Options for the Alert Slider.
Redesign of the Volume Adjustment Bar
Shelf Optimizations
Updated OxygenOS UI
Updated Interface and UI of the Clock app
Updated Android Security Patch Level to 1/12/16
Increased System Stability
General Bug Fixes
Important:
Clock, Calculator and Messages will be REPLACED by stock OnePlus apps if you have never updated the corresponding Google apps. But you can download these apps from Google in the Play Store even after the replacement.
Many of the phone settings will be restored to default after upgrading to 3.5.5, for instance device name, ring tones, accent colours and status bar battery indication will all be reverted to default settings.
After updating to 3.5.5, basic functions like WiFi connectivity, Network and Fingerprint might be affected if users flash back to 3.1.0. Users will have to use a special 3.1.0 downgrading version and flashing tool that will wipe all data from the phone. You should backup if you want to revert to older versions from 3.5.5 without losing data.
For those who were on previous versions for the OnePlus 2, we appreciate your active feedback and attempts to reach out to us. With your help, we have been able to better optimize and improve several key areas. Thank you for your patience and as always, we look forward to hearing your continued feedback in the bug reporting forum here: https://forums.oneplus.net/feedback/.
As this update will move you to the new Oxygen UI, please follow the link below for the UI/UX experience survey. We’d really appreciate a few minutes of your time, as it will help us make OxygenOS even better.
- Feedback on UI/UX: https://goo.gl/forms/EOd2tSdFJI2N6xfD3
As always, this OTA will be incremental. The OTA will reach a small percentage of users today, and we'll begin a broader rollout in a few days.
Your feedback is appreciated. We may not always be able to respond to every comment in the forums, but please be assured that we take your comments and feedback seriously. Hope you enjoy!
Never Settle.
Click to expand...
Click to collapse
OTA Links: Thanks to evilgenius94
OTA ROM Link (Flash it over OOS 3.1.0 only)
https://www.androidfilehost.com/?fid=385035244224407042
Official Full Flashable ROM Link
http://otafsc.h2os.com/patch/amazon...2Oxygen_14_OTA_026_all_1612220228_c351fee.zip
Click to expand...
Click to collapse
https://forums.oneplus.net/threads/oxygenos-3-5-5-mm-ota-for-oneplus
Finally, but I'm waiting here for the flashable zip.
Zip....zip....zip....zip....
please provide zip link....!!!!
OTA ROM Link (Flash it over OOS 3.1.0 only)
https://www.androidfilehost.com/?fid=385035244224407042
Official Full Flashable ROM Link
http://otafsc.h2os.com/patch/amazon...2Oxygen_14_OTA_026_all_1612220228_c351fee.zip
evilgenius94 said:
OTA ROM Link (Flash it over OOS 3.1.0 only)
https://www.androidfilehost.com/?fid=385035244224407042
Official Full Flashable ROM Link
http://otafsc.h2os.com/patch/amazon...2Oxygen_14_OTA_026_all_1612220228_c351fee.zip
Click to expand...
Click to collapse
Thank You !
Downloading...
Okay guys, my IMEI2 shows "0" so you think that this update will fix this?
High chances cause it also include volte changes which directly affct firmware i thnk so
Full Rom AFH Link:
https://www.androidfilehost.com/?fid=673368273298918181
marpe said:
Full Rom AFH Link:
https://www.androidfilehost.com/?fid=385035244224407042
Click to expand...
Click to collapse
What is this ?
Its only 104.2 MB !
marpe said:
Full Rom AFH Link:
https://www.androidfilehost.com/?fid=385035244224407042
Click to expand...
Click to collapse
This is OTA File. Flash it from OOS 3.1.0 only
Visit http://forum.xda-developers.com/oneplus-2/general/rom-oxygenos-3-5-5-oneplus-2-links-t3523895 for all links (Full ZIP or OTA)
[email protected]+ said:
What is this ?
Its only 104.2 MB !
Click to expand...
Click to collapse
My apologies.
This is the correct link
https://www.androidfilehost.com/?fid=673368273298918181
Cryer said:
Okay guys, my IMEI2 shows "0" so you think that this update will fix this?
Click to expand...
Click to collapse
+1
Enviado desde mi ONE A2005 mediante Tapatalk
Flashed OS 3.5.5 directly on H2OS 2.5 Beta by twrp recovery.
Everything works till now. i will report back soon.
marpe said:
My apologies.
This is the correct link
https://www.androidfilehost.com/?fid=673368273298918181
Click to expand...
Click to collapse
That's okay I got it !
Thanks !
marpe said:
My apologies.
This is the correct link
https://www.androidfilehost.com/?fid=673368273298918181
Click to expand...
Click to collapse
Call me OCD but.. why is the filename different?
OnePlus2Oxygen_14_OTA_026_all_1612220228.zip
OnePlus2Oxygen_14_OTA_026_all_1612220228_c351fee.zip
Just wondering..
A query!
Sorry for the dumb question. Should I directly flash the above mentioned flashable zip on the custom rom or should I first go back to OOS?
Great update
Wow this update to OPT is so cool ...
8bitrebellion said:
Sorry for the dumb question. Should I directly flash the above mentioned flashable zip on the custom rom or should I first go back to OOS?
Click to expand...
Click to collapse
what rom you are using right now ?
i have read that someone has installed official OOS 3.5.5 directly over CM 14.1 via TWRP recovery.
levis007 said:
what rom you are using right now ?
i have read that someone has installed official OOS 3.5.5 directly over CM 14.1 via TWRP recovery.
Click to expand...
Click to collapse
I'm on official crDroid 7.1.1
Guys, twrp and root are gone after updating, any guides on how to root after update?
I'M NOT RESPONSIBLE FOR ANY DAMAGE AND/OR DATA LOSS AS A RESULT OF FLASHING THIS ROM !!!
PLEASE PERFORM FULL BACKUP IN THE MICRO SD CARD OR IN AN EXTERNAL STORAGE BEFORE YOU TRY !!!
Do you need reliability and predictability? Then better stay with THIS ROM
I have decided to create a separate thread because:
- I would like to distinguish PIE BETA bug reports from my normal (OREO stable) thread, mentioned above
- It is normal that there will be definitely much more "bad reports" here, because most of them will be "beta related"
This thread will be closed when Samsung will release stable Android Pie (One UI)
Everything you will need to know about DevBase ROM in general - you will find in my stable thread (mentioned above)
Differences comparing to stable Oreo DevBase ROM:
- No Xposed (we need to wait for rovo89)
Note 8 (SM-N950F/DS):
>> N950FXXU2ZSB2_DevBase_v6.0.zip << (MEGA)
>> N950FXXU2ZSB2_DevBase_v6.0.zip << (AFH)
Click to expand...
Click to collapse
Dirty flash over my Oreo DevBase ROM SHOULD WORK WITHOUT ISSUES but before you try - I would highly recommend you to set default (stock) theme and default (stock) icons !!! However - I would recommend you clean install (Wipe -> Swipe to Factory Reset is enough).
Please REMOVE custom options.prop file if you have any in /sdcard or external sdcard (mainly because of debloat list which causes more issues in Pie).
Known problems:
- [CLEAN INSTALL] Magisk Manager may not appear after clean install despite Magisk has been installed without errors during install - if you notice that there is no Magisk Manager - DO NOT flash Magisk, it is enough to install Magisk Manager as normal app (use ATTACHMENT - it is original apk from Magisk v18.1), then REBOOT device (important!)
- OEM unlock toggle seems to be disabled in the Developer Options but it is not true (otherwise you would not be able to use TWRP and this ROM). It is side effect of protection I put in the kernel against "KG State: Prenormal" in the DM mode. It is not real issue, just ignore it. EDIT: starting from ZSAB - OEM unlock toggle has been HIDDEN to avoid further confusion! Don't worry about that
SafetyNet PASS in this ROM
Thanks to:
- @corsicanu for share me untouched N950F dump
- all persons mentioned in my main thread
Wow wow wow
Sent from my SM-N950F using XDA Labs
Altarnatif link pls. thnx
HorstiG said:
Wow wow wow
Click to expand...
Click to collapse
Absolutely true
Hako06 said:
Altarnatif link pls. thnx
Click to expand...
Click to collapse
Done... AFH mirror has been added
Why Magisk 17.3?
Sent from my SM-G955F using XDA Labs
HorstiG said:
Why Magisk 17.3?
Sent from my SM-G955F using XDA Labs
Click to expand...
Click to collapse
This ROM flashes Magisk v17.3 in case of clean install or v18.0 in case of dirty flash - it is because known problem with sudden reboot at the end of setup wizard with v18.0 and clean install. So my recommendation is - DO NOT update Magisk until you pass setup wizard.
So... that only means that you performed clean flash When you finish initial setup - just install attached magisk.apk, then update via Magisk Manager. Next time (dirty update) it will install v18.0
I have another problem, OEM Toggle is off and I get this message after each reboot.
Sent from my SM-G955F using XDA Labs
CSC is okay
Sent from my SM-G955F using XDA Labs
HorstiG said:
I have another problem, OEM Toggle is off and I get this message after each reboot.
Sent from my SM-G955F using XDA Labs
Click to expand...
Click to collapse
Have you read post #1 (known problems) ?? Just ignore that it is off position (it is not true, it just reads real state wrong due to strong RMM/KG state protection I put in the kernel). Every time you will try to enable it - it will force you to wipe data, nothing more - will stay in off position (only visually)
Sorry, According to the message, says there is a problem with the device, I should contact the Manufacturer
Sent from my SM-G955F using XDA Labs
---------- Post added at 11:09 PM ---------- Previous post was at 10:49 PM ----------
After flashing Magisk same problem. But everything works
Sent from my SM-G955F using XDA Labs
What about going back to Oreo? Is the Pie BL working for Oreo?
Can I flash this rom for note korean n950n?
_alexndr said:
Done... AFH mirror has been added
Click to expand...
Click to collapse
Glad to see this up! Keep up the amazing work!
why do i keep getting this error from the first biot if this rom?
and whats the meaning of it?
it's a bit scary notification
p.s: full wipe and clean install
I have the dolby atmos button ,but i can't activate it. Does it work dolby atmos?
HorstiG said:
[...] After flashing Magisk same problem. But everything works
Click to expand...
Click to collapse
Alivevil said:
why do i keep getting this error from the first biot if this rom?
and whats the meaning of it?
it's a bit scary notification
p.s: full wipe and clean install
Click to expand...
Click to collapse
Nothing wrong with your device, really It is side effect of changed "ro.build.fingerprint" in build.prop to pass SafetyNet (thanks to @corsicanu for the hint & tests)
If it is really annoying to you - you can restore original line in build.prop, as follow:
Code:
ro.build.fingerprint=samsung/greatltexx/greatlte:9/PPR1.180610.011/N950FXXU5ZSA5:user/release-keys
... but then SafetyNet will fail and most of banking apps + GooglePay + some other apps that check SafetyNet - will not work anymore
_alexndr said:
Nothing wrong with your device, really It is side effect of changed "ro.build.fingerprint" in build.prop to pass SafetyNet (thanks to @corsicanu for the hint & tests)
If it is really annoying to you - you can restore original line in build.prop, as follow:
Code:
ro.build.fingerprint=samsung/greatltexx/greatlte:9/PPR1.180610.011/N950FXXU5ZSA5:user/release-keys
... but then SafetyNet will fail and most of banking apps + GooglePay + some other apps that check SafetyNet - will not work anymore
Click to expand...
Click to collapse
nice explanation! And from the other side: what value should have ro.build.fingerprint to pass safetyNet?
Do I get it right that there's no publicly available Pie kernel sources, and thus there's absolutely no way to get SELinux permissive until the official release?
_alexndr said:
Nothing wrong with your device, really It is side effect of changed "ro.build.fingerprint" in build.prop to pass SafetyNet (thanks to @corsicanu for the hint & tests)
If it is really annoying to you - you can restore original line in build.prop, as follow:
... but then SafetyNet will fail and most of banking apps + GooglePay + some other apps that check SafetyNet - will not work anymore
Click to expand...
Click to collapse
I have a boarding computer in my car that shows me at launch I need to service. The master says no problem, drive quietly on. It totally annoys though. I have the bug fixed, but I can't refuel anymore. This is a bad solution and must work differently.
Sent from my SM-N950F using XDA Labs
Hello!
Please forgive me as it's been a long time since I made/posted a stock based ROM as I have been mainly doing security research and dealing more with source code last few years.
Most seasoned Samsung users on here probably already know me and work that I have done so I won't waste time posting any "about me" stuff.
DISCLAIMER:
This ROM is still WIP (although fully functional) and based on Android R Beta 1ZTJG for G988U/U1/W. An unlocked BL is required to flash this ROM! This ROM contains bootloader files specific to U/U1/W so likely will NOT WORK on hk/china/exynos/any other models that are not U/U1/W so don't ask. If you do decide to flash it and try it out and if your device blows up then that is your own fault.
Features:
- Based on Stock R Official Build aka 1CTKH.
- This is a full ODIN flashable tar (got tired of messing with update zips.)
- Disabled vbmeta
- Pretty heavily debloated
- Deknoxed
- Removed pesky recovery-from-boot.p which could cause boot loops.
- Currently only has SPR csc mods (will mod others in next build)
*Native call recording
*App Lock (forgot to push the app though so will fix in next build)
*Few others.. will post more specifics and give creds since I used the csc mod for exynos as a basis..
- Probably forgetting something but thhis is an initial build so will add more as time goes..
Instructions:
- Backup your data if you must since this will wipe device!
- Put phone in dl mode and extract zip to pc somewhere.
- Open ODIN and in AP slot navigate to SamPWND.R.Official-G988U.tar and flash it.
- Device will reboot into stock CTKH recovery where you will wipe data and reboot.
- Set up device and win?
Root Steps (optional):
Note: Custom kernels can be used since source code for R is released.
EDIT: There is now a working recovery which will be available in post 2.
- After you have flashed rom and everything is set up reboot back into DL mode.
- Open included ODIN and in AP slot navigate to the 1BTHD_BL_and_Recovery_For_Root.tar. Make sure auto reboot is NOT selected. Flash it.
- Once thats flashed hold vol down and power until screen turns off then immediately hold vol up and power until LOS recovery loads.
- However you want to flash magisk (I included Magisk.v21.0.zip) flash it.
* I do adb push magisk.zip /... Then select Install Update then install from root and select magisk zip...
- Reboot back into DL mode.
- In ODIN, select AP slot then navigate to 1ZTJG_BL_and_Recovery.tar and flash it.
- Device will boot back into ROM and you will now be rooted!
***TWRP RECOVERY***
- Download listed below
- I suggest you follow all the steps above and make sure it's up and running before installing TWRP.
- Basically extract the twrp download below, create it into a .tar file using 7zip or something and flash it in ODIN.
- adb works
- file manager and other tools work
- If follow above steps first as recommended, data will be decrypted.
- mounts work
- flashing works
- backup/restore works
- no issues found so far?
Steps are really quite simple if you have ever used ODIN.
Latest ROMS can now be accessed here:
ROMS | SamPWND
www.sampwnd.com
I will create a Telegram ROM support group soon where you can ask all the questions you want there (I am not at liberty to discuss unlocking bootloader on XDA so any questions directed towards this or the ROM itself then join the Telegram group for questions and ROM support.)
TELEGRAM ROM SUPPORT GROUP CLICK HERE
ENJOY!
Shout Outs:
@topjohnwu for Magisk of course
@jesec for LOS Recovery
@afaneh92 base TWRP
@Mentalmuso for direction on how to get TWRP to work on R!
More shout outs coming soon!
Downloads will be in post 2.
ROM Updates Are Located Here
SamPWND.R4.v1-G988U1 Download
G988U1-R-TWRP Download
ROM Questions and support and SamPWND support in general if you have ANY questions then join this Telegram Group chat!
CHANGELOG and Other Updates:
12/10/2020
- SamPWND.R.Official-G988U is latest build
- Base updated to 1CTKH Official R
- Same features as original release
- Removed less bloat since some things were broke
- Left csc decoded so you can make your own edits directly without having to decode it and flash it or whatever.
10/31/2020
- SamPWND.R4.v1-G988U1 is initial build/upload
- SamPWND.R4.v1-G988U1.TWRP.Recovery is initial upload for TWRP recovery that works on R firmware
- Added Telegram ROM support link to OP and second post.
Delete..
this is amazing!! hope you do this to the ZTJN build for Snapdragon <3 excellent work on this though , thank you!!
mysticjp said:
this is amazing!! hope you do this to the ZTJN build for Snapdragon <3 excellent work on this though , thank you!!
Click to expand...
Click to collapse
I want something for smg9860
mysticjp said:
this is amazing!! hope you do this to the ZTJN build for Snapdragon <3 excellent work on this though , thank you!!
Click to expand...
Click to collapse
when its released and update.zip is posted sure
bodomfan said:
I want something for smg9860
Click to expand...
Click to collapse
i dont own that model.. i dont like releasing for devices i cant test or troubleshoot issues on.
ZTJQ is latest =o
*prays* for this stock rom/firmware modicification and enchancement.. for the current build
g988u1 BTIG https://drive.google.com/u/0/uc?export=download&confirm=BReC&id=1nZQ6Qr_C4Yx5SroJey02rob_En2HX3Ge
988U1-BTIG to ZTJA.zip https://1drv.ms/u/s!AmeN999T4X8UhP07wOFGOhRmsW0zMw?e=Qabkdx
988u1-ztja.To.Ztjg https://1drv.ms/u/s!AmeN999T4X8UhP061TYuDPuYN3Bqwg?e=UaZlIs
G988U1 Beta 3, ZTJG To ZTJQ https://1drv.ms/u/s!AmeN999T4X8UhP4NKKEqVocq_6siIg?e=hamgdf
mysticjp said:
ZTJQ is latest =o
*prays* for this stock rom/firmware modicification and enchancement.. for the current build
Click to expand...
Click to collapse
yes i know.. im a busy person lately lol im already working on it tho
mysticjp said:
g988u1 BTIG https://drive.google.com/u/0/uc?export=download&confirm=BReC&id=1nZQ6Qr_C4Yx5SroJey02rob_En2HX3Ge
988U1-BTIG to ZTJA.zip https://1drv.ms/u/s!AmeN999T4X8UhP07wOFGOhRmsW0zMw?e=Qabkdx
988u1-ztja.To.Ztjg https://1drv.ms/u/s!AmeN999T4X8UhP061TYuDPuYN3Bqwg?e=UaZlIs
G988U1 Beta 3, ZTJG To ZTJQ https://1drv.ms/u/s!AmeN999T4X8UhP4NKKEqVocq_6siIg?e=hamgdf
Click to expand...
Click to collapse
dont really need this posted in here lol might confuse ppl plus theres already a thread dedicated to updates whereas this is my custom rom thread
oh im sorry, how does one delete their own post?
mysticjp said:
oh im sorry, how does one delete their own post?
Click to expand...
Click to collapse
You can't delete it but you can edit it.
i cant edit that post with the links, theres no edit button
mysticjp said:
i cant edit that post with the links, theres no edit button
Click to expand...
Click to collapse
its all good lol. not a lot of traffic here anyways.. just dont want ppl askin for support on doing ota updates lol
reply..
lol true , cant wait for yor ZTJQ 988u1 enhanced stock firmware rom release..
---------- Post added at 10:08 AM ---------- Previous post was at 10:07 AM ----------
i kno it is not yor only function in life but i just am yerning for it before theres a newer build :gryn:
mysticjp said:
lol true , cant wait for yor ZTJQ 988u1 enhanced stock firmware rom release..
---------- Post added at 10:08 AM ---------- Previous post was at 10:07 AM ----------
i kno it is not yor only function in life but i just am yerning for it before theres a newer build :gryn:
Click to expand...
Click to collapse
i got it built but found a few issues.. i overdid it lol gotta fix usb debugging and fstab
mysticjp said:
g988u1 BTIG https://drive.google.com/u/0/uc?export=download&confirm=BReC&id=1nZQ6Qr_C4Yx5SroJey02rob_En2HX3Ge
988U1-BTIG to ZTJA.zip https://1drv.ms/u/s!AmeN999T4X8UhP07wOFGOhRmsW0zMw?e=Qabkdx
988u1-ztja.To.Ztjg https://1drv.ms/u/s!AmeN999T4X8UhP061TYuDPuYN3Bqwg?e=UaZlIs
G988U1 Beta 3, ZTJG To ZTJQ https://1drv.ms/u/s!AmeN999T4X8UhP4NKKEqVocq_6siIg?e=hamgdf
Click to expand...
Click to collapse
so I just flash BTIG and then flash the rest in stock recovery right?
Smartphones13 said:
so I just flash BTIG and then flash the rest in stock recovery right?
Click to expand...
Click to collapse
No that content is not meant for this page