I am making good progress with a flashable ZIP file that can be flashed using the diagnostic factory mode. The ZIP takes a current EMUI ROM base and debloats it removing Chinese langauge apps and unnecessary Huawei branding. Useful frameworks such as Motion, Gestures, AoD, etc. are retained. Going forward I plan to develop the solution further so that you will be able to modify a customisable config file that will specify what packages you want to retain, and select a downloaded EMUI ROM for the device that will be customised as per your instruction , resulting in a ZIP file being pushed to your device and you then simply need to reboot and allow the phone to flash the update. Simple ! Therefore, each time a new stock ROM is released then this tool simply needs to be run against your customisation !
Development so far-
1. I now have a method of entering the hidden factory mode allowing a ZIP package to be flashed from internal storage , so you can simply download the ZIP to your Download folder and flash from there.
2. I have a method of saving an OTA to file.
3. I have identified the ROM GPT for the device and all partitions and sequencing; this allows me to extract all partitions contained within an Huawei ROM.
4. I am currently interrogating a sample Huawei patch ROM to discern the method of patching filesystems - which i determined is basically is an overlay of the filesystem. This makes things easy as it allows a reverse image creation from a stock partitions minus bloat removed.
5. Next step is to attempt creation of a simple patch ROM using analysis obtained from 1-4 above, and trial this out on my device. This will involve CSC and SHA256RSA creation and will need to determine a method for this. Following that I need to consolidate everything into a script. Going even further, I plan to develop a GUI app which will aid N00bs
6. Following trials I will publish the ROM and instructions with sources so that anyone in the community can examine if they so desire.
* ALL WITHOUT ROOT *
HELP NEEDED:
Anyone with a rooted device , and able to "adb root" into their device as "root" , please PM me as i could do with information that you can obtain a lot easier than I can.
Great work
Waiting for the file
?
Sorry I'm not rooted ?
Update: Rooted if need any adb feedback per OP. I haven't TWRP'd and re-ROM'd but I'm going to go back update 195 and repatch. Each time is a big hassle (just remembering steps).
I think this is great. I can probably give a hand Fri afternoon.
Sent from my HWEVR using XDA Labs
Sounds quite promising but, just to be clear, do you need an unlocked bootloader to do this?
mscion said:
Sounds quite promising but, just to be clear, do you need an unlocked bootloader to do this?
Click to expand...
Click to collapse
Rudolpht said:
I think this is great. I can probably give a hand tomorrow afternoon.
Sent from my HWEVR using XDA Labs
Click to expand...
Click to collapse
+1
mscion said:
Sounds quite promising but, just to be clear, do you need an unlocked bootloader to do this?
Click to expand...
Click to collapse
Hi said no need to Unlock
rowihel2012 said:
Hi said no need to Unlock
Click to expand...
Click to collapse
Hi. I hope you are correct! Just don't see anything explicitly said about bootloader. Only says you don't need root. Would be neat if this approach could be used to rebrand phone.
Any progress?
Looks like this didn't get to far because of the 195 update?
turilo said:
Looks like this didn't get to far..
Click to expand...
Click to collapse
That's The Curse of HUAWEI ?
rowihel2012 said:
That's The Curse of HUAWEI
Click to expand...
Click to collapse
LOL )))))
He even stop replying to this thread...
The guys busy and has a life. Leave him be.
Abdul Oxford said:
The guys busy and has a life. Leave him be.
Click to expand...
Click to collapse
Thank you Abdul. I watched in disbelief as i saw members post comments about me... They will not now be getting the solution.
I need a card for the phone but it doesn't use SD its a type i can't get get hold of.. Some nVcard ?? Anyway.. I'm continuing search and development. There's a hidden menu that you can use to flash a zip from the card you see... I'll PM you abdul when I'm closer..others can go for a hike
Tweetytek said:
Thank you Abdul. I watched in disbelief as i saw members post comments about me... They will not now be getting the solution.
I need a card for the phone but it doesn't use SD its a type i can't get get hold of.. Some nVcard ?? Anyway.. I'm continuing search and development. There's a hidden menu that you can use to flash a zip from the card you see... I'll PM you abdul when I'm closer..others can go for a hike
Click to expand...
Click to collapse
I PM'd you shortly after you started this thread offering my help since I have a rooted AL00. The memory card is Huawei proprietary card called NM Card (nano memory card - SD card the same size as nano SIM card) here's a link for them at Amazon (not an affiliate link) https://www.amazon.com/Huawei-Memory-Mirco-Compact-Flash/dp/B07KS8JBFH and they are quite expensive compared to micro sd cards.
Tweetytek said:
Thank you Abdul. I watched in disbelief as i saw members post comments about me... They will not now be getting the solution.
I need a card for the phone but it doesn't use SD its a type i can't get get hold of.. Some nVcard ?? Anyway.. I'm continuing search and development. There's a hidden menu that you can use to flash a zip from the card you see... I'll PM you abdul when I'm closer..others can go for a hike
Click to expand...
Click to collapse
Sorry about some folks being rude. You see it at times but I was surprised when I read it. Regardless, your finding is interesting. Where is the hidden menu you can use to flash a zip from? I wasn't planning on getting a nano sim because they are pricey. But if it is possible to do as you say I'll provably get one. Is there also an option to flash zip from file on computer? Thanks for your efforts!
Tweetytek said:
Thank you Abdul. I watched in disbelief as i saw members post comments about me... They will not now be getting the solution.
I need a card for the phone but it doesn't use SD its a type i can't get get hold of.. Some nVcard ?? Anyway.. I'm continuing search and development. There's a hidden menu that you can use to flash a zip from the card you see... I'll PM you abdul when I'm closer..others can go for a hike
Click to expand...
Click to collapse
Fully understand your viewpoint but please take into account that the insensitive and pointless posts made by some here do not reflect or represent the majority view of forum members.
Please let me know as well, your hard work is truly appreciated.
Tweetytek said:
Thank you Abdul. I watched in disbelief as i saw members post comments about me... They will not now be getting the solution.
I need a card for the phone but it doesn't use SD its a type i can't get get hold of.. Some nVcard ?? Anyway.. I'm continuing search and development. There's a hidden menu that you can use to flash a zip from the card you see... I'll PM you abdul when I'm closer..others can go for a hike
Click to expand...
Click to collapse
You can use an USB OTG and a usb stick. Works with the hidden menu trick thing. They can be found for pretty cheap price
Status on this?
Sent from my [device_name] using XDA-Developers Legacy app
Ckao said:
Status on this?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
OP and his disciples fled after being offended. I believe they followed the OnePlus rainbow hand in hand.
Sent from my EVR-L29 using Tapatalk
Related
Hey guys I'm really new to this rooting, flashing, and stuff like that...but I am a quick leaner as I have already rooted my galaxy note, same one like the AT&T but mine is Bell's version...I want to install the paranoidandroid rom on my phone...is there a step by step guide for first timmers?
Thanks a lot for any info
Reclaim said:
http://www.youtube.com/watch?v=JmvCpR45LKA&feature=youtube_gdata_player
Click to expand...
Click to collapse
is that really necessary?
---------- Post added at 08:19 AM ---------- Previous post was at 08:17 AM ----------
sherycash said:
Hey guys I'm really new to this rooting, flashing, and stuff like that...but I am a quick leaner as I have already rooted my galaxy note, same one like the AT&T but mine is Bell's version...I want to install the paranoidandroid rom on my phone...is there a step by step guide for first timmers?
Thanks a lot for any info
Click to expand...
Click to collapse
Welcome! You have a ton of reading to do....link below is a good start. Youtube is great for watching step by step videos....
http://forum.xda-developers.com/showthread.php?t=1483113
also...
http://rootgalaxynote.com/galaxy-no...-jelly-bean-rom-for-att-galaxy-note-sgh-i717/
So an sd card is required for flashing a rom?
And I don't understand the kernel part
sherycash said:
Hey guys I'm really new to this rooting, flashing, and stuff like that...but I am a quick leaner as I have already rooted my galaxy note, same one like the AT&T but mine is Bell's version...I want to install the paranoidandroid rom on my phone...is there a step by step guide for first timmers?
Thanks a lot for any info
Click to expand...
Click to collapse
some people will spend more time giving you a smart comment or being sarcastic then to either ignore or just help.... hope this helps i made a crappy tutorial video ..feel free to pm or just ask again on here if you need more help.. just follow the op instructions and flash twrp recovery..makes it easier!!
twrp:http://teamw.in/project/twrp2/96
http://youtu.be/U5XkNxwCs34
from this thread http://forum.xda-developers.com/showthread.php?p=29789196#post29789196
So all I know now is to install the cm10 romi need to backup the current rom...go to Odin and flash the downloaded rom .zip and then reboot? Or what I'm confused thanks
sherycash said:
So all I know now is to install the cm10 romi need to backup the current rom...go to Odin and flash the downloaded rom .zip and then reboot? Or what I'm confused thanks
Click to expand...
Click to collapse
if you are rooted ..download TWRP get into CWM (clockworkrecovery) anf flash TWRP..then reboot recovery, you should then see a screen like the one in my video.. reboot sytem and download the 3 files needed for cm10 as instructed by the OP.. reboot into TWRP recovery.BACKUP BACKUP!!!!!!!!.and follow my video..may be like an hour before im back online..good luck!!!
TAKE YOUR TIME!!!! read carefully 2-3 times if you have to go slow!!!!
I need to buy the sd card tomorrow only then I can manage to flash rom
sherycash said:
I need to buy the sd card tomorrow only then I can manage to flash rom
Click to expand...
Click to collapse
why ?
Because I need to backup my current Rom on sd card and I also need to put the cm10 rom on sd card then onto the phone...am I wrong?please correct me
Thanks
sherycash said:
Because I need to backup my current Rom on sd card and I also need to put the cm10 rom on sd card then onto the phone...am I wrong?please correct me
Thanks
Click to expand...
Click to collapse
i always back mine up on the internal sd card andhave a rom in there just in case..others may do it differently, but there are many options recovery allows you to download from pc via usb... but its better to always have a back up on your internal card in my opinion.. because in some cases you can lose access to the external sd card..just my opinion..just remember to take your time and read/follow instructions VERY carefully!!!:laugh:
sd card
if you dont have room on internal sd card..then yes get an external sd card(you should always have one) and move some stuff over like media..etc
---------- Post added at 08:19 AM ---------- Previous post was at 07:56 AM ----------
check your pm inbox...MAKE SURE THE ROM IS FOR YOUR PHONE!!!!(BELLS)
Anyone else think there should be a deep web version of xda?
Sent from my SAMSUNG-SGH-I717 using xda premium
Reclaim said:
http://www.youtube.com/watch?v=JmvCpR45LKA&feature=youtube_gdata_player
Click to expand...
Click to collapse
Actually new vid is out, a little more refined: http://www.youtube.com/watch?feature=player_embedded&v=2Hqwn5HpESc
sherycash said:
I need to buy the sd card tomorrow only then I can manage to flash rom
Click to expand...
Click to collapse
You might be misunderstanding on the sd card, you have an internal sd the phones drive, this is where I put my ROMs to flash. The external sd that you can put into the phone is or can be your backup, I use an external meaning I can remove it, this is where I put my backups of items.
I only use the built in drive internal sd for storage of my ROMs to flash. There are lots of video on this subject, just do a youtube search on the subject.
While we are at it, if you are on a computer check my links in my signature, I have a {General information and Helpful Tips} section for some good reading and the GNote Super page also for all your flashing needs. And you can PM me or just keeping posting lots of good folks around that will help.
defnow said:
is that really necessary?
---------- Post added at 08:19 AM ---------- Previous post was at 08:17 AM ----------
Welcome! You have a ton of reading to do....link below is a good start. Youtube is great for watching step by step videos....
also...
Click to expand...
Click to collapse
+1
---------- Post added at 07:14 AM ---------- Previous post was at 07:13 AM ----------
mejori said:
i always back mine up on the internal sd card andhave a rom in there just in case..others may do it differently, but there are many options recovery allows you to download from pc via usb... but its better to always have a back up on your internal card in my opinion.. because in some cases you can lose access to the external sd card..just my opinion..just remember to take your time and read/follow instructions VERY carefully!!!:laugh:
sd card
if you dont have room on internal sd card..then yes get an external sd card(you should always have one) and move some stuff over like media..etc
---------- Post added at 08:19 AM ---------- Previous post was at 07:56 AM ----------
check your pm inbox...MAKE SURE THE ROM IS FOR YOUR PHONE!!!!(BELLS)
Click to expand...
Click to collapse
good info +1
sherycash said:
Because I need to backup my current Rom on sd card and I also need to put the cm10 rom on sd card then onto the phone...am I wrong?please correct me
Thanks
Click to expand...
Click to collapse
Honestly, you need to use the search function. Read everything you can. If you have to ask if you're wrong, you're wrong about something. I know you don't like to hear this, and I also know you don't want to ruin your device. If you don't take the time to read and research, you won't understand the Rom that you flash anyways thus leading to more questions from you that can be solved by searching and you will only annoy the developers and ruin things for everyone because you developed bad habits of wanting things dropped in your lap. No one is here to hold your hand through the process when there's a wealth of information at your fingertips. All of the people that have accomplished flashing their phones have done so without a thread like this begging for a walkthrough. With all due respect, follow the rules because nobody is responsible for damage to your phone, but yourself.
Finally got the rom installed and working...just restoring my apps and data....but it's asking for permissions to install apps for each app...I'm using titanium backup app...thanks a lot u guys...(who ever helped)
sherycash said:
Finally got the rom installed and working...just restoring my apps and data....but it's asking for permissions to install apps for each app...I'm using titanium backup app...thanks a lot u guys...(who ever helped)
Click to expand...
Click to collapse
Use the thanks button. Glad you got it going.
............
Sent from my SGH-T769 using xda app-developers app
Having to ask someone to use the "thanks " button is like a youtuber telling you to "thumbs up my video".. if someone does or doesn't do it it shouldn't really matter especially here..
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Sharky157 said:
Having to ask someone to use the "thanks " button is like a youtuber telling you to "thumbs up my video".. if someone does or doesn't do it it shouldn't really matter especially here..
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
I wasn't asking them to thank me. I was reminding them to thank those who helped them. You would know that if you read as per the forum rules. You know what else is part of the forum rules? Using the thanks button. Imagine that. Perhaps you should spend less time trolling me and spend more time watching the Official XDA Welcome video. Seems like you still need it. I'll link it for you so you don't have to search. Don't forget to use the thanks button!
http://www.youtube.com/watch?v=JmvCpR45LKA&feature=youtube_gdata_player
Ok gents, plz enough.
=========== ====
@ OP did you accomplish your task?
Sent from my SAMSUNG-SGH-I717 using xda premium
Reclaim said:
http://forum.xda-developers.com/showthread.php?p=30107806
Click to expand...
Click to collapse
understood and i saw that, i was readdressing to the OP to confirm, thx
Sent from my SAMSUNG-SGH-I717 using xda premium
I've searched very hard to find a recovery for my new phone, but there is not many options. So I managed to build one myself, fixed the fb shifting and did some modifications for convenience.
Hope it will be useful, and thanks to the CWM team.
----------------------------------------------------------------
It seems the raw emmc partition is protected by the kernel, so the update.zip which has a boot.img inside won't fully applied. You have to drag the img out and flash it via hboot mode(unlock required).
I wonder if android devices all protect their raw partitions, or just desire x does.
Anyway, here is a new build of CWM, with a tiny fix of usb lun file mismatch( not sure if it fix the usb mount issue, need someone with a otg cable to test). A patch file of CWM v6.0.1.5 is uploaded too, check to see if it helps.
Claudyy said:
I've searched very hard to find a recovery for my new phone, but there is not many options. So I managed to build one myself, fixed the fb shifting and did some modifications for convenience.
Hope it will be useful, and thanks to the CWM team.
Click to expand...
Click to collapse
Nice work. All i can do is press thankx for sharing since i am a hardcore stock fellow until further updates are released by htc. In time hope many will try your CWM. Good job sharing.
Claudyy said:
I've searched very hard to find a recovery for my new phone, but there is not many options. So I managed to build one myself, fixed the fb shifting and did some modifications for convenience.
Hope it will be useful, and thanks to the CWM team.
Click to expand...
Click to collapse
Is the Screen problem gone?
The Android Manual said:
Is the Screen problem gone?
Click to expand...
Click to collapse
Screen confirm the problem disappeared:good:
Can you share your modifications?
Added to Index.
Outstanding job, keep rocking!
Put [RECOVERY] at the beginning of headline and put date of publising so we can track it.
Mods, please move this to development section.
rogio2 said:
Screen confirm the problem disappeared:good:
Click to expand...
Click to collapse
Nice! Very good news. How about backup and restore capability?
Nice and classic non-touch CWM!!!
Thanks so much!!!
How is it flashed?
Sent from my HTC Desire X using xda app-developers app
imbtrthanu said:
How is it flashed?
Sent from my HTC Desire X using xda app-developers app
Click to expand...
Click to collapse
flashed in Desire_X_All-In-One_Kit_v1.1 Change the name to recovery , working recovery rom
thank you very much >>> Claudyy
1. download the attached file in OP
2. rename the file to CWM.img
3. copy and paste the renamed file in this location (where you extracted AIO Tool)
Desire_X_All-In-One_Kit_v1.1.rar\Desire_X_All-In-One_Kit_v1.1\Data\Recoveries [Here]
4. flash
Has anyone tested it?
Enviado desde mi HTC Desire X usando Tapatalk 2
Works for me.
No more screen jumps.
Made a backup (tar format), removed an app, then restored. Worked as expected.
epic, you must have been the guy in the irc channel, in this case my CWM is no longer supported. use this, also pm a mod to shift this to original dev good work
Lloir said:
epic, you must have been the guy in the irc channel, in this case my CWM is no longer supported. use this, also pm a mod to shift this to original dev good work
Click to expand...
Click to collapse
and this is the epic approval. its really nice to see developers commending others and getting along well instead of sudden urge of jealousy or throwback. thankx to you both and others too.
i am still on stock, but i have downloaded the attachment and am really eager to un-stock. haha
Glad it works for you. It's no big deal, just a small bug fix.
In fact, I'm pretty new to android. Still adapting to this new phone, also trying to make it better.
Claudyy said:
Glad it works for you. It's no big deal, just a small bug fix.
In fact, I'm pretty new to android. Still adapting to this new phone, also trying to make it better.
Click to expand...
Click to collapse
I gotta say you started pretty awesome with your new adaptation. I hope you just dont stop with CWM only. Man i see potential in you for android development (aka Desire X forum).
Mount usb not working....:crying:
rogio2 said:
Mount usb not working....:crying:
Click to expand...
Click to collapse
I can confirm this but it didn't work on Llior's recovery either.
Anyway back-up and restore works just fine (without having to manually create md5) and it looks slick. Good job!
Guys, i posted a test build of touch recovery in dev section. It works but has the display shift bug. @ OP, i need your help to fix the display bug, and then look into the usb mount issue. All credits to OP, Lloir and Koush, i just followed a tutorial.
Regards
Yasir
Here I want to give. how to root k900
1 first download (inb) file at here! https://disk.yandex.com/public/?hash=7s8h1Xn1VP+rDQuXX6gGylP6xlTNMWkrzma8NHcHKrI=
After success download ind file, Please place its that (inb file) at buit in memory.
ok here they way to do its!
1-put inb file into sd main
2 create sdfuse folder.
3-put inb file into sdfuse
4-reboot-your k900 into recovery mode with long press volume up and together with power button.
5-after reboot to recovery mode use up and down volume button to navi up side down.
6-choose sdupdate and press power button
7-after finish update reboot again.
8-yeah bingo and u can see (Superuser) was already in u lenovo K900:good:
Hope i can sharing to everyone !! And Sorry About my Bad English
anyone tried ?
Yup the process is legit if that is what you are asking LOL!
But Yandex takes ages for me to download so i downloaded the same file from another source. Adding it to my google drive so others can use it too. Will update later when its done. :fingers-crossed:
Edit - It's done Enjoiceeeee~
KROW inb file (Google Drive)
http://bit.ly/1l0fdKB
Need some advice on getting this K900! Please n.n
Evaravenspell said:
Yup the process is legit if that is what you are asking LOL!
But Yandex takes ages for me to download so i downloaded the same file from another source. Adding it to my google drive so others can use it too. Will update later when its done. :fingers-crossed:
Edit - It's done Enjoiceeeee~
KROW inb file (Google Drive)
http://bit.ly/1l0fdKB
Click to expand...
Click to collapse
Hey! Thank you so much for the upload!! It's downloading at 1.3MBps. ha n.n Just in time for me that I come here only sometimes!
Although I don't really need it right now I think I'll need it cause I'm going to buy this K900 very soon! I'm actually about to order it today! Is this file the latest ROM?
Do you have the K900? Can you, please, encourage or discourage me about getting it? What do you say? I love its desing and size, and I like it's Intel's chip in it. I've had a Razr i and was great!
I've followed this forum months ago, but have missed all news about this device. Can you tell me if this device will get any update like 4.3 or 4.4? Any good changes in the last months with software updates? I've heard it heated a lot at first. :/
Anything you could tell me about how this device is doing now could help me!
Thank you!
- Leonardo
Need some advice on getting this K900! Please n.n
Sw33t_Lov3r said:
Hey! Thank you so much for the upload!! It's downloading at 1.3MBps. ha n.n Just in time for me that I come here only sometimes!
Although I don't really need it right now I think I'll need it cause I'm going to buy this K900 very soon! I'm actually about to order it today! Is this file the latest ROM?
Do you have the K900? Can you, please, encourage or discourage me about getting it? What do you say? I love its desing and size, and I like it's Intel's chip in it. I've had a Razr i and was great!
I've followed this forum months ago, but have missed all news about this device. Can you tell me if this device will get any update like 4.3 or 4.4? Any good changes in the last months with software updates? I've heard it heated a lot at first. :/
Anything you could tell me about how this device is doing now could help me!
Thank you!
- Leonardo
Need some advice on getting this K900! Please n.n
Click to expand...
Click to collapse
The phone is good. Im very satisfied. There has been rumors that we will get the 4.3 update but not sure when. Yes the phone heats up sometimes but with the latest updates i feel like its gone down tremendously. There is no actual flaw to this phone i really like it. I will be using it until the K910 is officially released in my country. I wanna try an LTE phone lol.
HereSomeScreenShot
Here my Lenovo K900 After (Rooted) With latest Firmware onK900_ROW_1_S_009_0288_131277
Evaravenspell said:
Yup the process is legit if that is what you are asking LOL!
But Yandex takes ages for me to download so i downloaded the same file from another source. Adding it to my google drive so others can use it too. Will update later when its done. :fingers-crossed:
Edit - It's done Enjoiceeeee~
KROW inb file (Google Drive)
http://bit.ly/1l0fdKB
Click to expand...
Click to collapse
Yes I know its very much "legit" . I had no problem in downloading the file uploaded initially. I will try this soon as my phone is just a week old and just wana make sure everything fine with it as after rooting I will loose its warranty.
Just a single question I have is, when on lock screen I press PIN code the whole screen brightness kinda flicker/brighten up on touch. Is it normal or its only me getting this? Also screen brightness varies while I use the phone!
Yes I know its very much "legit" . I had no problem in downloading the file uploaded initially. I will try this soon as my phone is just a week old and just wana make sure everything fine with it as after rooting I will loose its warranty.
Just a single question I have is, when on lock screen I press PIN code the whole screen brightness kinda flicker/brighten up on touch. Is it normal or its only me getting this? Also screen brightness varies while I use the phone!
Rshahzad......can i known is, What version do u own now at u K900?
Rshahzad......can i known is, What version do u own now at u K900?
Its 32 gb non-rooted. See the snapshot !
Will this reformat phone?
Will these delete everything? I mean reset the phone?
dade14 said:
Will these delete everything? I mean reset the phone?
Click to expand...
Click to collapse
Yes, update of .inb file allways erases data
Help
stevenchew said:
Here my Lenovo K900 After (Rooted) With latest Firmware onK900_ROW_1_S_009_0288_131277
Click to expand...
Click to collapse
I downloaded this ROM and run and error shown as CRC error and can't find System.img in the SDFUSE folder .
Please help and advoise :crying:
merankassim said:
I downloaded this ROM and run and error shown as CRC error and can't find System.img in the SDFUSE folder .
Please help and advoise :crying:
Click to expand...
Click to collapse
Which ROM you now use?
Same problem !
merankassim said:
I downloaded this ROM and run and error shown as CRC error and can't find System.img in the SDFUSE folder .
Please help and advoise :crying:
Click to expand...
Click to collapse
I've downloaded this ROM, first I've checked every single thing as version I'm using, Kernel etc and all of them are perfecly equal to the image that them posted as "my device after flashed" but didn't work for me \:
someone has faced this issue to ?
please, support if you can
I'd really like to get ROOT !
thanks in advance
felipemichelr said:
I've downloaded this ROM, first I've checked every single thing as version I'm using, Kernel etc and all of them are perfecly equal to the image that them posted as "my device after flashed" but didn't work for me \:
someone has faced this issue to ?
please, support if you can
I'd really like to get ROOT !
thanks in advance
Click to expand...
Click to collapse
Just flashed successfully and the phone is also running perfectly.. saw superuser access request on the start
What is u k900 stock version? My tis firmware are worldwide rooted version! And onemore important step is , didt u clear all user data or cache after full flash?
Sent from my Lenovo K900_ROW using xda app-developers app
felipemichelr said:
I've downloaded this ROM, first I've checked every single thing as version I'm using, Kernel etc and all of them are perfecly equal to the image that them posted as "my device after flashed" but didn't work for me \:
someone has faced this issue to ?
please, support if you can
I'd really like to get ROOT !
thanks in advance
Click to expand...
Click to collapse
What is u k900 stock version? My tis firmware are worldwide rooted version! And onemore important step is , didt u clear all user data or cache after full flash?
merankassim said:
I downloaded this ROM and run and error shown as CRC error and can't find System.img in the SDFUSE folder .
Please help and advoise :crying:
Click to expand...
Click to collapse
What is u k900 stock version? My tis firmware are worldwide rooted version! And onemore important step is , didt u clear all user data or cache after full flash?
Thanks all but
Thanks for your efforts ..
If this process is totally successful and every thing is good , but suppose that i decided to remove the root and back to stock kernel ??
Are there any easy methods ??
Any advice???
just_lion said:
Thanks for your efforts ..
If this process is totally successful and every thing is good , but suppose that i decided to remove the root and back to stock kernel ??
Are there any easy methods ??
Any advice???
Click to expand...
Click to collapse
Just go to superuser and hit the unroot button. Only stock kernel is available, no custom kernels around yet.
Sent from my Lenovo K900_ROW using xda app-developers app
This is a development plan of porting AsusCamera.apk.
Coz I like the function of PixelMaster so much.
I have decompiled and sign for the apk now.
And it is able to be installed.
But worst of all, it can not be opened...
Now I hope anyone can help me to do this.
If this thread is not suitable for this category, hope manager can move it to the correct one.
Don't delete it, plz...
Software Source: ASUS Padfone mini 4.3's stock ROM (TW_A11_10_14_5_7_20131220)
Android Version: 4.3
Device Camera Pixel: 8MP
Test Device: SONY Xperia SP (12.1.A.1.201)
Click to expand...
Click to collapse
Sorry for my poor English...
Dragonkind said:
This is a development plan of porting AsusCamera.apk.
Coz I like the function of PixelMaster so much.
I have decompiled and sign for the apk now.
And it is able to be installed.
But worst of all, it can not be opened...
Now I hope anyone can help me to do this.
If this thread is not suitable for this category, hope manager can move it to the correct one.
Don't delete it, plz...
Sorry for my poor English...
Click to expand...
Click to collapse
You need to find all the library files, permissions and maybe some binaries for the apk..
Sent from my SCH-I605 using xda app-developers app
Dragonkind said:
This is a development plan of porting AsusCamera.apk.
Coz I like the function of PixelMaster so much.
I have decompiled and sign for the apk now.
And it is able to be installed.
But worst of all, it can not be opened...
Now I hope anyone can help me to do this.
If this thread is not suitable for this category, hope manager can move it to the correct one.
Don't delete it, plz...
Sorry for my poor English...
Click to expand...
Click to collapse
I would recommend taking a look at this guide on "How to Port OEM Apps / Vendor Apps to Your Current ROM" as a great starting place for starting to get the app to work.
lacoursiere18 said:
You need to find all the library files, permissions and maybe some binaries for the apk..
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Thank u for your advices.
U mean the path "/system/lib", right?
I have found 4 files (below) which contain "camera" in their names, but just have no idea to add into apk file.
Is there any possibility to the files that don't contain "camera", but are relative to the camera?
shimp208 said:
I would recommend taking a look at this guide on "How to Port OEM Apps / Vendor Apps to Your Current ROM" as a great starting place for starting to get the app to work.
Click to expand...
Click to collapse
OK, I will take it a read, thank u.
Dragonkind said:
Thank u for your advices.
U mean the path "/system/lib", right?
I have found 4 files (below) which contain "camera" in their names, but just have no idea to add into apk file.
Is there any possibility to the files that don't contain "camera", but are relative to the camera?
OK, I will take it a read, thank u.
Click to expand...
Click to collapse
Once you find out the dependent files (Re-read the guide) you take these files and package them in CWM flashable .zip not necessarily adding them into the apk file.
Dragonkind said:
Thank u for your advices.
U mean the path "/system/lib", right?
I have found 4 files (below) which contain "camera" in their names, but just have no idea to add into apk file.
Is there any possibility to the files that don't contain "camera", but are relative to the camera?
OK, I will take it a read, thank u.
Click to expand...
Click to collapse
Yes system/lib.. you can transfer them via recovery too instead of making a flash able zip..
Yes there are possibilities that there will be files without the name camera in them.. but that's what logs are for
Sent from my SCH-I605 using xda app-developers app
shimp208 said:
Once you find out the dependent files (Re-read the guide) you take these files and package them in CWM flashable .zip not necessarily adding them into the apk file.
Click to expand...
Click to collapse
lacoursiere18 said:
Yes system/lib.. you can transfer them via recovery too instead of making a flash able zip..
Yes there are possibilities that there will be files without the name camera in them.. but that's what logs are for
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Frankly speaking, I am preparing for my mid-term test now...
Let me read the guide first.
Thx for your helps~
Dragonkind said:
Frankly speaking, I am preparing for my mid-term test now...
Let me read the guide first.
Thx for your helps~
Click to expand...
Click to collapse
Good luck with your exam studying, and I will be happy to help best I can when you have more time.
Are you still working on this?
YOU BETTER DO I LOVE THE SELFIE MODE Dx
LordRaZerManh said:
YOU BETTER DO I LOVE THE SELFIE MODE Dx
Click to expand...
Click to collapse
Well, I almost give up this project...
I had asked my friend, he gave the following attachment to me.
It can just open, but all of the special functions like PixelMaster & GIF recording are all broken.
I guess it may be related to hardware issues...
Dragonkind said:
Well, I almost give up this project...
I had asked my friend, he gave the following attachment to me.
It can just open, but all of the special functions like PixelMaster & GIF recording are all broken.
I guess it may be related to hardware issues...
Click to expand...
Click to collapse
read this it's from the Asus website http://www.asus.com/PixelMaster/
6th_Hokage said:
read this it's from the Asus website http://www.asus.com/PixelMaster/
Click to expand...
Click to collapse
Hardware issue…
My Xperia SP has an 8MP rear camera,
but I guess it lacks of something like an image processing chip.
Port ver lolipop thank bro
Device mi4c
Oh man, I would love to be able to get the PixelMaster app back on my Zenfone 2 (I'm running Cyanogenmod 12). The default Google camera sucks horribly compared to the stock ASUS camera app.
Has there been any more work on this project? I'm gonna read that guide myself and work on it, but I guess I'd have to put the stock ROM back on my phone first.
clamum said:
Oh man, I would love to be able to get the PixelMaster app back on my Zenfone 2 (I'm running Cyanogenmod 12). The default Google camera sucks horribly compared to the stock ASUS camera app.
Has there been any more work on this project? I'm gonna read that guide myself and work on it, but I guess I'd have to put the stock ROM back on my phone first.
Click to expand...
Click to collapse
If you install the apk on the zf2 with cm12 it works. Only issue I've found is the depth of field doesn't work
ejames2001 said:
If you install the apk on the zf2 with cm12 it works. Only issue I've found is the depth of field doesn't work
Click to expand...
Click to collapse
Oh, really? That's kinda nice, although yeah the depth-of-field working would sure be nice. I'll have to try it out tonight. I can just use the .apk from the OP, correct?
Well I tried installing that .apk from the OP. Had to allow installation from unknown sources first, then after hitting Install, it asked me to give Google permission to send data and whatever else. Regardless if I select Accept or Decline, I always get an "App not installed" message.
Damnit, I was looking forward to using it! I think I'm gonna try stripping it from the stock ROM myself.
clamum said:
Well I tried installing that .apk from the OP. Had to allow installation from unknown sources first, then after hitting Install, it asked me to give Google permission to send data and whatever else. Regardless if I select Accept or Decline, I always get an "App not installed" message.
Damnit, I was looking forward to using it! I think I'm gonna try stripping it from the stock ROM myself.
Click to expand...
Click to collapse
Just google Asus Camera APK and download the latest 2.0 release from there, one was released this month.
ejames2001 said:
Just google Asus Camera APK and download the latest 2.0 release from there, one was released this month.
Click to expand...
Click to collapse
Alrighty, thanks. I actually was searching for PixelMaster .apk this weekend but didn't have much luck besides seeing a ton of frickin spam sites masking as legit .apk download sites. I'll do another search tonight.
Hopefully I can get the .apk to install. It sure would be nice to have the depth-of-field working, but after skimming through that thread linked earlier (How to Port OEM Apps to Your Current ROM) there's no way I can follow that. It's nice the guy put together a guide, but being unfamiliar with this stuff I need to follow something written in clear English.
I guess the ASUS Camera app was easier to find than I thought. The first time I tried it was nothing but spam site after spam site. Maybe it was Bing's fault, haha.
But I got version 2.0.0.150805_5 and it installed with no problem and works great. Thanks for your help, ejames2001, I appreciate it.
No one seems to know how lol
Dude are you serious? Please tell me how you did this. What program did you use to get root on this phone? Why didn't you post any directions in the first place?
Expired.
Updated
....
Piridroid said:
Hope it is working man. Dude just to make sure you understood, this TWRP we installed is not only meant for a similar but different model, but as i said i unpacked it and checked inside, and saw that some stuff seemed wrong. It was made for a device running kitkat, the partitions layout seemed different etc (our device uses almost 30 partitions O.O).
So i dont recommend trying to flash stock or custom cyanogenmod roms with it untill we are sure this custom recovery is correclty ported for our specific model, 100% functional. For instance, i couldnt find my external SD card browsing with it... Thankfully it worked for the root process
Since we already have a recovery ported to a similar device, same family 105, its probalby easy to finish porting 100% for our 105B and then start looking for custom roms for it.... or how to port them >.< lol
We can probably find someone else to help with that here in the XDA forum.
UPDATE 08/28/2016: The TWRP now seems to work fine with the external SD cart! next step is to find or build a custom rom for it and then see if TWRP is also working for flashing ROMS.
Click to expand...
Click to collapse
finally got relief i also have same phone.. give me that twrp please so that i can root my phone ?
.....
Give me that twrp link
Btw can i flash it without pc?
......
Piridroid said:
I only have a .img file which i use as .tar in Odin. I never flashed via adroid itself, apks etc. You can try but idk if it must be in .zip file with script or if you can use the .img/tar directly, Is yours 105B ?
Click to expand...
Click to collapse
Yes. Im using J105B model. So i will use odin to flash it. Thanks.
^.^ xDD
Bro thanks man. Its working beautifully.
-J105B
root
Piridroid said:
Ok, you must make sure that you have an unlocked bootloader to flash TWRP.
For that purpose go to Settings -> Developer options, and enable "OEM unlock" . "Also USB debugging".
Since we are installing Supersu after, im not sure but its safer to enable "Unknown sources" under the first security tab.
NOTE: this TWRP i will provide, is only meant to be used to install Supersu! Do NOT use it to install any custom ROM. and also dont trust its backups and data wipes/resets.
I would personally install the TWRP, use it to install Supersu and then flash my stock recovery back (only the recovery, not the stock boot). This will keep the root status and leave your stock rom more close to its original state. If you dont have a backup of your stock boot and recovery, i can share how to do it.
Thats the reason i am not openly linking this TWRP, i am afraid to people will brick their devices trying to use this port to flash custom ROMS Cyanogen etc.
BUT i am 100% confident that for rooting purposes only, this port works fine. I will link it to you in PM, cheers
Click to expand...
Click to collapse
Can you send link TWRP. have a J105b wanting to root it
djnandinho said:
Can you send link TWRP. have a J105b wanting to root it
Click to expand...
Click to collapse
Will send to your inbox. Please let me know in case it works for ya.
Feel free to leave a comment here : (Você é BR?)
https://www.youtube.com/watch?v=WRODoOqTSu4
A little off topic, I hope you can help me. I just need to know if this model J105B supports OTG?
joser1309 said:
A little off topic, I hope you can help me. I just need to know if this model J105B supports OTG?
Click to expand...
Click to collapse
OTG cable/connection ? i dont have and never tested myself.
But i downloaded "Do i have OTG?" and "USB OTG Checker" from playstore and both said that this devide does support OTG, that the OS have the OTG API etc.
Maybe the user manual on samsung's webpage have some more specific info, hope it helps.
PS: if you still did not buy it and want to know my opinion : For gamers and ppl who enjoy photography, dont buy this model. Its hardware is nice, very compact and good priced if you buy cheap. But the auto-focus-less camera makes hard to take pictures of documents for instance. And the touchscreen is buggy for playing games! only 2-point multi-touch and very bad calibrated! fails all the time. The battery is also only 1.500mxx ... you will need to be charging it everyday.
Piridroid said:
OTG cable/connection ? i dont have and never tested myself.
But i downloaded "Do i have OTG?" and "USB OTG Checker" from playstore and both said that this devide does support OTG, that the OS have the OTG API etc.
Maybe the user manual on samsung's webpage have some more specific info, hope it helps.
PS: if you still did not buy it and want to know my opinion : For gamers and ppl who enjoy photography, dont buy this model. Its hardware is nice, very compact and good priced if you buy cheap. But the auto-focus-less camera makes hard to take pictures of documents for instance. And the touchscreen is buggy for playing games! only 2-point multi-touch and very bad calibrated! fails all the time. The battery is also only 1.500mxx ... you will need to be charging it everyday.
Click to expand...
Click to collapse
Thanks for the reply. The question is if for example you can connect a flash memory and perform any action. I can not find information about this function in this model, it is for a project.
joser1309 said:
Thanks for the reply. The question is if for example you can connect a flash memory and perform any action. I can not find information about this function in this model, it is for a project.
Click to expand...
Click to collapse
If those apks i mentioned are correct, this device does support otg stuff.
I can buy a cable to test it out for you. You say flash memory like normal pendrives ?
Thanks. Yes, like pendrives, mouse or keyboard. I will use an IOIO board.
Piridroid said:
If those apks i mentioned are correct, this device does support otg stuff.
I can buy a cable to test it out for you. You say flash memory like normal pendrives ?
Click to expand...
Click to collapse
Piridroid said:
Will send to your inbox. Please let me know in case it works for ya.
Feel free to leave a comment here : (Você é BR?)
https://www.youtube.com/watch?v=WRODoOqTSu4
Click to expand...
Click to collapse
Hi.
Could you please send me the link, too?
THX!!!