Not tested yet, but seems to be final that are rolling out for China OTA.
Instruction:
The prerequisite must be the official N9500CHC4CRL1 system
First unpack the N9500CHC4CRL1 five-piece bottom package with odin (is ignored by this bottom package)
Method 1: After brushing and rebooting, enter the official recovery double clear once
Unzip N9500 ADB one-click upgrade 9.0.zip
Put update.zip (no decompression required) into the N9500 ADB one-click upgrade 9.0 folder
Then select apply update from adb in the official recovery
Finally, connect the phone to the computer. Run the ADB One-Click Update 9.0 folder. Double-click to brush in .bat and wait for it to complete.
Method 2: If you have a MicroSD/TF card, you must be a stand-alone flash memory card. The SD card that the body flash memory is out of will not work. The official rec does not recognize it.
Copy the update.zip upgrade package to the card, restart the phone and select apply update from sd card, then select the upgrade package, follow the on-screen prompts, and then restart automatically.
https://drive.google.com/file/d/1c3-EUdl5cCA0HSeRM3y11Ftsmsty1oYS/view?usp=drivesdk
Latest Chinese Android 8 firmware:
https://drive.google.com/file/d/1iOPLHRw5whehtGn-w7mCxoLeQDByO6zT/view?usp=drivesdk
And ADB file with utils and bat.
Use at your own risk! Not responsible for any damage.
Will this work on the Hong Kong Variant of the Note 8?
vitamindy said:
Will this work on the Hong Kong Variant of the Note 8?
Click to expand...
Click to collapse
I don't know. Probably if you flash Chinese firmware with Android 8, then update to 9.
when ı tried to install Chinese rom to hong kong device I get this error ''frp is enabled not allow download non-frp boot binary'' at odin
ı cannot find a solution can you advise ?
help please...
settar666 said:
when ı tried to install Chinese rom to hong kong device I get this error ''frp is enabled not allow download non-frp boot binary'' at odin
ı cannot find a solution can you advise ?
Click to expand...
Click to collapse
Your submission could not be processed because you have logged in since the previous page was loaded.
Please push the back button and reload the previous window.
it work???
RikkieJar said:
it work???
Click to expand...
Click to collapse
Yes, but it has a lot of Chinese junk in it. Some items are not translated. It has most of languages, like English, German, Russian e.t.c.
Can be installed to Hong Kong version, but to roll it back you need to have a PIT file and then re-partition phone.
I tested! it's no problem and the phone very smooth
tedhuaxia said:
I tested! it's no problem and the phone very smooth
Click to expand...
Click to collapse
What Your Phone China or Hong Kong?
You can Tell me How to install it.
PL. because install this request my data on the device will delete?
RikkieJar said:
What Your Phone China or Hong Kong?
You can Tell me How to install it.
PL. because install this request my data on the device will delete?
Click to expand...
Click to collapse
my phone from HK.
how to install? see the first page
Hi, can you upload beta 2
engenek said:
Hi, can you upload beta 2
Click to expand...
Click to collapse
Link please.
jeniat said:
Link please.
Click to expand...
Click to collapse
http://bbs.gfan.com/forum.php?mod=viewthread&tid=9550020
Can someone please upload the beta 2
Sent from my SM-N9500 using Tapatalk
engenek said:
http://bbs.gfan.com/forum.php?mod=viewthread&tid=9550020
Click to expand...
Click to collapse
ayyan84 said:
Can someone please upload the beta 2
Click to expand...
Click to collapse
I've opened an account but when I try to answer at the post for getting the password it asks something in Chinese, I guess it some number or something...
Beta2
Copy to SD card and apply form recovery
Sent from my SM-N9500 using Tapatalk
---------- Post added at 05:51 AM ---------- Previous post was at 05:47 AM ----------
ayyan84 said:
Beta2
Copy to SD card and apply form recovery
Sent from my SM-N9500 using Tapatalk
Click to expand...
Click to collapse
https://drive.google.com/file/d/1fb9TCpnvprM9lWW0tHhidYJvzwYPldK-/view?usp=drivesdk
Sent from my SM-N9500 using Tapatalk
---------- Post added at 05:52 AM ---------- Previous post was at 05:51 AM ----------
ayyan84 said:
Beta2
Copy to SD card and apply form recovery
Sent from my SM-N9500 using Tapatalk
---------- Post added at 05:51 AM ---------- Previous post was at 05:47 AM ----------
https://drive.google.com/file/d/1fb9TCpnvprM9lWW0tHhidYJvzwYPldK-/view?usp=drivesdk
Sent from my SM-N9500 using Tapatalk
Click to expand...
Click to collapse
https://drive.google.com/file/d/1fb9TCpnvprM9lWW0tHhidYJvzwYPldK-/view?usp=drivesdk
Sent from my SM-N9500 using Tapatalk
Help??
I have a note 8 Blue 256gb n9500 snapdragon dual sim version, was rooted..but I screwed it up by installing a new firmware that's "u4" on it..now i can't even downgrade/ re rooted it..any Idea what should I do?
M4rlon197 said:
I have a note 8 Blue 256gb n9500 snapdragon dual sim version, was rooted..but I screwed it up by installing a new firmware that's "u4" on it..now i can't even downgrade/ re rooted it..any Idea what should I do?
Click to expand...
Click to collapse
Try to install its original firmware via odin
Sent from my SM-N9500 using Tapatalk
How's the phone performance with the new stock android 9 pie update?.
Some people reported battery performance degraded as compared to android 8 stock?.
The Performance is way better than oreo and also the UI is attractive. So far the battery timing is also satisfactory. Being beta, I am facing few issues. Like the live messegees are not working. The always on display sometimes is not popping up. Since it's Chinese beta, I can see some Chinese words here and there specially in the yellow pages directory, timer, samsung assistance etc. The camera performance I think is not appreciable comparing to oreo.
It's good to taste Pie but I would suggest to wait till official version if Note 8 is ur primary phone.
Sent from my SM-N9500 using Tapatalk
Related
Hello guys
I want to share the stock lollipop which has been prerooted with dualrecovery.
For Unlocked Bootloaders
Coming from 4.4.4 stock.Flash nut's dual recovery.
Go to recovery,
wipe system
wipe data
install the zip
Here are the links-links are updated
https://mega.co.nz/#!1MYxWS5C!4Ah-4izFOvCSKFYx209kPuKhZxzbnuLs6GWI7XUAn64
http://www.mediafire.com/download/hgga8bb2wqjd82l/flashable-signed.zip
Please reply me for any queries.
HERE ARE SOME SCREENSHOTS
If you want to change the audio quality.You can refer this link after installing the rom
http://forum.xda-developers.com/xperia-z-ultra/themes-apps/mod-increased-volume-audio-clarity-t3083197
deepa2119 said:
Hello guys
I want to share the stock lollipop which has been prerooted with dualrecovery.
Go to recovery and install the zip
Here are the links
http://www.4shared.com/zip/GfKa3frlce/C6802_LOLLIPOP_Customized_IN_P.html
http://www.mediafire.com/download/lopl1lmbp81gjhf/C6802_LOLLIPOP_Customized_IN_Prerooted.zip
MEGA on the way...
Please reply me for any queries.
If you want to change the audio quality.You can refer this link after installing the rom
http://forum.xda-developers.com/xperia-z-ultra/themes-apps/mod-increased-volume-audio-clarity-t3083197
Click to expand...
Click to collapse
Never passes from a black screen after flashing. When flashing before rebooting, it says no OS found.
shaolin95 said:
Never passes from a black screen after flashing. When flashing before rebooting, it says no OS found.
Click to expand...
Click to collapse
did u wipe system data?
deepa2119 said:
did u wipe system data?
Click to expand...
Click to collapse
Yes, I always swipe everything except deleting Internal SD Card unless nothing else works.
shaolin95 said:
Yes, I always swipe everything except deleting Internal SD Card unless nothing else works.
Click to expand...
Click to collapse
which recovery u r using?.try once from nuts dual recovery.twrp
what is the installation instructions?
Thanks for the share
I am already on unrooted indian 5.02
what is the installation instruction?
---------- Post added at 09:09 AM ---------- Previous post was at 08:16 AM ----------
seking said:
Thanks for the share
I am already on unrooted indian 5.02
what is the installation instruction?
Click to expand...
Click to collapse
Went into a boot loop
seking said:
Thanks for the share
I am already on unrooted indian 5.02
what is the installation instruction?
---------- Post added at 09:09 AM ---------- Previous post was at 08:16 AM ----------
Went into a boot loop
Click to expand...
Click to collapse
if you are in unrooted 5.02
First flash 4.4 ftf
Root using easy root
Flash Nut's dual recovery
Now flash the above zip
Does this have Remote Play built-in, I read from another user in General Section that remote play is coming inbuilt in Indonesian firmware. Thanks.
jassalmithu said:
Does this have Remote Play built-in, I read from another user in General Section that remote play is coming inbuilt in Indonesian firmware. Thanks.
Click to expand...
Click to collapse
no.not available in indian version
Can i use this in multirom...?
Sent from my Xperia Z Ultra using XDA Premium 4 mobile app
sohamraut said:
Can i use this in multirom...?
Sent from my Xperia Z Ultra using XDA Premium 4 mobile app
Click to expand...
Click to collapse
for now i think its not possible.as u have to patch the kernel..but give it a try flashing as secondary
Is it possible for you to upload on google drive ? All the three links fail at 89.92%
Edit 1 : Got the rom
Edit 2 : Flashed the rom , only a black screen appears
[email protected]|>ow said:
Is it possible for you to upload on google drive ? All the three links fail at 89.92%
Edit 1 : Got the rom
Edit 2 : Flashed the rom , only a black screen appears
Click to expand...
Click to collapse
From which recovery u flashed.use latest nuts dual recovery.twrp
U must be coming from rooted 4.4.4.and followed the procedure?
will this work on locked bootloader
will this work on locked bootloader?
deepa2119 said:
From which recovery u flashed.use latest nuts dual recovery.twrp
U must be coming from rooted 4.4.4.and followed the procedure?
Click to expand...
Click to collapse
I was on Candy Rom , used Jackies kernel to flash the rom . It flashed ok but didnt go past the black screen
for me bootloop
Since it works on unlocked bootloader, I unlocked mine using flashtool.
Did everything as per instruction, but mine went int a bootloop
it seems this ROM is not working. everytime bootloop issues.......useless crap! lol
stay away guys...
hi prathap,
i ve tried exactly as per ur instructions.. i was on stock .108..rooted it ..installed nuts recovery
then in twrp..wiped cache ..data.. system..dalvik..n installed ur Zip. but after the completion it says No os found..r u sure.. if i say yes n reboot.. i get sony logo an blank then..i ve tried 3times..with out success..i had to use flash tool to get my xperia to work again..any how i got the stock lollipop ftf..but could not root it. any suggestions on how to root 14.5.a.0.242 ftf
Hai guys
Sorry i was bit busy with my work.tonight i will solve your problems.i will upload a double tested rom within a day.Please bare with me..
For me there are no problems found.but no one has succesfully booted the rom.Let me check again for the issue.
EditROBLEM IDENTIFIED AND RECTIFIED...UPLOADING STARTED
[email protected] said:
hi prathap,
i ve tried exactly as per ur instructions.. i was on stock .108..rooted it ..installed nuts recovery
then in twrp..wiped cache ..data.. system..dalvik..n installed ur Zip. but after the completion it says No os found..r u sure.. if i say yes n reboot.. i get sony logo an blank then..i ve tried 3times..with out success..i had to use flash tool to get my xperia to work again..any how i got the stock lollipop ftf..but could not root it. any suggestions on how to root 14.5.a.0.242 ftf
Click to expand...
Click to collapse
Dont wry my friend.tonight im going to upload tested rom..U can flash it without any problem and enjoy the stock rom with full root privileges
Hello everyone,
I'm a newbie in here, so last week I got the new Samsung Galaxy J7 prime and I go on ahead and check if xda has already a development on it cause I want it to be rooted to unlock the posibilities but sadly there isn't so I just google and there was this twrp recovery that the site said would do the the flash for root. I flashed it on my j7 prime with odin and when I go to recovery mode it said "recovery is not seandroid enforcing" so i downloaded the other link because it has two links then i flashed the other one. But after that it said the same thing so i just turned off my phone but after that it won't start it's just stuck on the samsung logo with the "not seandroid enforcing" above it. I basically know what to do I should download the firmware but I'm from the philippines so downloading a firmware that is 1.7gb and when it is at 1.5gb the download stops and fails because of the internet here. Heres the link for the one I'm downloading. http:<<samsung-updates.com<details<79342<<SM-G610Y<GLB<G610YZTU1APJ2.html replace the < with / it is a link i just cant post due to xda guidelines. it just fails server error. so can someone help me like download the file and send it to me on mail via google drive because downloads on google drive don't fail or maybe torrent it. Thanks.
P.S. I tried to use the samfir_ v. 0.3.6 to download the firmware but there is so many dll errors so yeah...:crying:
that was the fake twrp ... no official twrp is made for tis device
Varun hellboy said:
that was the fake twrp ... no official twrp is made for tis device
Click to expand...
Click to collapse
Yeah I'm sorry I was so dumb and excited to root my phone so yeah.... Can anyone help me please
Hi, If you want to use SamFirm you have before you have to install Microsoft Visual C ++ 2008 Redistributable & Microsoft Visual C ++ 2010 Redistributable.
Thanks a lot it worked now great I thought it was not working yesterday because it just said "Error Decrypting File: Wrong Key." but it was just our internet because its too f*ng slow tnx a lot
Soviethroad06 said:
Thanks a lot it worked now great I thought it was not working yesterday because it just said "Error Decrypting File: Wrong Key." but it was just our internet because its too f*ng slow tnx a lot
Click to expand...
Click to collapse
So hows you phone now??? I was actually rooting my Note 2 but stupidly, I rooted my J7 prime instead. Now I can't use it anymore. Can you tell me how you fixed your?? TIA :crying:
If you want to repair your J7 you can use Smartswitch. A few days ago I tried to flash my J7 Prime and also the **** (haha) So I went into "download mode" (Power + home + volume down) And I connected it to the PC and gave it "Emergency recovery" took about 40 minutes But everything went well. Just in case you ask for the model of your device and your S / N. (S / N is written on the back of your smatphone). I ask you to try to google search, because my English is crap and maybe you do not understand me.
Actually downloaded a firmware from samfirm.. unfortunately the only available firmware is for a SM-G610F.. And when I was able to run my phone again I noticed that its internal memory was now only 16GB.. :crying: I was wondering how can I have the 32GB back.. any advise??
Root ur J7 prime G610y
http://www.androidinfotech.com/2016...prime-g610y-marshmallow-install-twrp.html?m=1
Sent from my SM-G610Y using Tapatalk
---------- Post added at 10:27 AM ---------- Previous post was at 10:23 AM ----------
Firmware
http://samsung-updates.com/details/...0/stock-rom-firmware-original-samsung_25.html
Sent from my SM-G610Y using Tapatalk
---------- Post added at 10:28 AM ---------- Previous post was at 10:27 AM ----------
Pls make a feedback if it works on ur phone, hope that helps?
Sent from my SM-G610Y using Tapatalk
FredCord said:
Root ur J7 prime G610y
http://www.androidinfotech.com/2016...prime-g610y-marshmallow-install-twrp.html?m=1
Sent from my SM-G610Y using Tapatalk
---------- Post added at 10:27 AM ---------- Previous post was at 10:23 AM ----------
Firmware
http://samsung-updates.com/details/79342//SM-G610Y/GLB/G610YZTU1APJ2.html
Sent from my SM-G610Y using Tapatalk
---------- Post added at 10:28 AM ---------- Previous post was at 10:27 AM ----------
Pls make a feedback if it works on ur phone, hope that helps
Sent from my SM-G610Y using Tapatalk
Click to expand...
Click to collapse
hi thank you for the response. tried to download the firmware. seems to be a bit tricky. meron ka bang ibang link??
Yan plng na google ko boss eh
Sent from my SM-G610Y using Tapatalk
FredCord said:
Yan plng na google ko boss eh
Sent from my SM-G610Y using Tapatalk
Click to expand...
Click to collapse
Ayun I think it would take me 2 days to download the firmware.. hopefully it will bring back my 32gb thanks bro.. give you feedback if it works
Waiting[emoji3]
Sent from my SM-N930F using Tapatalk
geraldgax said:
So hows you phone now??? I was actually rooting my Note 2 but stupidly, I rooted my J7 prime instead. Now I can't use it anymore. Can you tell me how you fixed your?? TIA :crying:
Click to expand...
Click to collapse
I just followed saotsuke's advice
Hi, thanks to the new link, I have downloaded the firmware. having double thoughts of rooting the phone now.. Is it safe to root the phone? is it now stable or do I have to wait for a stable program?
geraldgax said:
Hi, thanks to the new link, I have downloaded the firmware. having double thoughts of rooting the phone now.. Is it safe to root the phone? is it now stable or do I have to wait for a stable program?
Click to expand...
Click to collapse
We should really wait for the stable program because I think there is still no clean root for now. I hope the root development for this phone gets more attention.
geraldgax said:
Hi, thanks to the new link, I have downloaded the firmware. having double thoughts of rooting the phone now.. Is it safe to root the phone? is it now stable or do I have to wait for a stable program?
Click to expand...
Click to collapse
Did u tried to root for the 2nd time boss?
Sent from my SM-G610Y using Tapatalk
other site of stock rom
http://www.stockrom.net/2016/10/stock-rom-firmware-original-samsung_25.html
FredCord said:
other site of stock rom
http://www.stockrom.net/2016/10/stock-rom-firmware-original-samsung_25.html
Click to expand...
Click to collapse
Thank you.. been busy lately. will give it a try this weekend:fingers-crossed:
Soviethroad06 said:
I just followed saotsuke's advice
Click to expand...
Click to collapse
You can use the òther link that i posted, that was tested for 32gb variant?
Sent from my SM-G610Y using Tapatalk
I have made easily flashable firmware based on android 5.1.1 and not remix for ONDA OBOOK 10SE. The code used in the commands comes from ZENFONE 5 FIRMWARE flash, just modified it to work on our OBOOK 10SE, after months of trying to flash it.
Its now very easy to install the firmware, it requires no special knowledge to flash ..its simple and straightforward..#just put TAB in booloader/fastboot mode-connect to pc -double click the CMD.exe and wait for flash to finish.. After succes flash.TAB will reboot automatically..
Any questions!? No..ok go ahead and get flashing
Download FIRMWARE HERE
https://mega.nz/#!t0NW1QCC!eZ4fe7u1lwqS93ruuc6VF9Sb2yg-upi6bcvnouBItBo
Bigups: ASUS And ONDA
dmilz said:
I have made easily flashable firmware based on android 5.1.1 and not remix for ONDA OBOOK 10SE. The code used in the commands comes from ZENFONE 5 FIRMWARE flash, just modified it to work on our OBOOK 10SE, after months of trying to flash it.
Its now very easy to install the firmware, it requires no special knowledge to flash ..its simple and straightforward..#just put TAB in booloader/fastboot mode-connect to pc -double click the CMD.exe and wait for flash to finish.. After succes flash.TAB will reboot automatically..
Any questions!? No..ok go ahead and get flashing
Download FIRMWARE HERE
Thanks you very much for providing this rom and download link. I want to ask if this will work with my onda-obook 10 se V5 version, and how do i boot my tablet into BootLoader/fastboot mode.
Thank you very much waiting for your response.
---------- Post added at 03:46 PM ---------- Previous post was at 03:43 PM ----------
banjicom said:
dmilz said:
I have made easily flashable firmware based on android 5.1.1 and not remix for ONDA OBOOK 10SE. The code used in the commands comes from ZENFONE 5 FIRMWARE flash, just modified it to work on our OBOOK 10SE, after months of trying to flash it.
Its now very easy to install the firmware, it requires no special knowledge to flash ..its simple and straightforward..#just put TAB in booloader/fastboot mode-connect to pc -double click the CMD.exe and wait for flash to finish.. After succes flash.TAB will reboot automatically..
Any questions!? No..ok go ahead and get flashing
Download FIRMWARE HERE
Thanks you very much for providing this rom and download link. I want to ask if this will work with my onda-obook 10 se V5 version, and how do i boot my tablet into BootLoader/fastboot mode.
Thank you very much waiting for your response.
Click to expand...
Click to collapse
dmilz said:
I have made easily flashable firmware based on android 5.1.1 and not remix for ONDA OBOOK 10SE. The code used in the commands comes from ZENFONE 5 FIRMWARE flash, just modified it to work on our OBOOK 10SE, after months of trying to flash it.
Its now very easy to install the firmware, it requires no special knowledge to flash ..its simple and straightforward..#just put TAB in booloader/fastboot mode-connect to pc -double click the CMD.exe and wait for flash to finish.. After succes flash.TAB will reboot automatically..
Any questions!? No..ok go ahead and get flashing
Download FIRMWARE HERE
Bigups: ASUS And ONDA
Click to expand...
Click to collapse
Thanks you very much for providing this rom and download link. I want to ask if this will work with my onda-obook 10 se V5 version, and how do i boot my tablet into BootLoader/fastboot mode.
Thank you very much waiting for your response.
---------- Post added at 03:55 PM ---------- Previous post was at 03:46 PM ----------
I don't really know how to check the version of my obook SE. I only assume it is the V5 version because i check the S/N at the back and i see V5 among the numbers.
Is there any other stock or custom android rom you can recommend for me that will work on this tablet apart from remix Os which is very limited and make the tablet uncustomizable.
Thanks.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
banjicom said:
dmilz said:
I have made easily flashable firmware based on android 5.1.1 and not remix for ONDA OBOOK 10SE. The code used in the commands comes from ZENFONE 5 FIRMWARE flash, just modified it to work on our OBOOK 10SE, after months of trying to flash it.
Its now very easy to install the firmware, it requires no special knowledge to flash ..its simple and straightforward..#just put TAB in booloader/fastboot mode-connect to pc -double click the CMD.exe and wait for flash to finish.. After succes flash.TAB will reboot automatically..
Any questions!? No..ok go ahead and get flashing
Download FIRMWARE HERE
Thanks you very much for providing this rom and download link. I want to ask if this will work with my onda-obook 10 se V5 version, and how do i boot my tablet into BootLoader/fastboot mode.
Thank you very much waiting for your response.
---------- Post added at 03:46 PM ---------- Previous post was at 03:43 PM ----------
banjicom said:
Thanks you very much for providing this rom and download link. I want to ask if this will work with my onda-obook 10 se V5 version, and how do i boot my tablet into BootLoader/fastboot mode.
Thank you very much waiting for your response.
---------- Post added at 03:55 PM ---------- Previous post was at 03:46 PM ----------
I don't really know how to check the version of my obook SE. I only assume it is the V5 version because i check the S/N at the back and i see V5 among the numbers.
Is there any other stock or custom android rom you can recommend for me that will work on this tablet apart from remix Os which is very limited and make the tablet uncustomizable.
Thanks.
Click to expand...
Click to collapse
It should work as long as you on OBOOK 10SE.. whether v1 v3 or v5..
and that one is not REMIX ..its plain 5.1.1..
no other roms i know of for OBOOK 10SE.. hope that helps..
booting into fastboot= turn off TAB , hold volume + and power key after vibrate let go of volume but keep holding volume +..(if volume + takes you to recovery try-...not sure , cause i got rid of my OBOOK)...
Click to expand...
Click to collapse
Click to expand...
Click to collapse
For those with other OBOOKS= you can download stock firmware extract and organize as i did in my firmware.. dont forget to copy over my CMD to your new rom and follow folder structure.. thanks
OBOOK roms flash made super easy!
dmilz said:
For those with other OBOOKS= you can download stock firmware extract and organize as i did in my firmware.. dont forget to copy over my CMD to your new rom and follow folder structure.. thanks
OBOOK roms flash made super easy!
Click to expand...
Click to collapse
Thanks man, you are the best.
banjicom said:
Thanks man, you are the best.
Click to expand...
Click to collapse
welcome..feel free to ask anytime you need help
dmilz said:
welcome..feel free to ask anytime you need help
Click to expand...
Click to collapse
hi dmilz,
The CMD FLASH_ALL_EXCEPT_STORAGE doesn't work, it just opens and closes immediately after i opened it. what do you think it is the problem.
banjicom said:
hi dmilz,
The CMD FLASH_ALL_EXCEPT_STORAGE doesn't work, it just opens and closes immediately after i opened it. what do you think it is the problem.
Click to expand...
Click to collapse
Are you in FASTBOOT?
installed INTEL Android drivers?
dmilz said:
welcome..feel free to ask anytime you need help
Click to expand...
Click to collapse
Below is the screenshot of what i see after i reboot into fastboot mode
banjicom said:
Below is the screenshot of what i see after i reboot into fastboot mode
Click to expand...
Click to collapse
Ok..good.. That's FASTBOOT..
But now.. Do you have Intel Android drivers installed on PC?
dmilz said:
Are you in FASTBOOT?
installed INTEL Android drivers?
Click to expand...
Click to collapse
Oh my bad
I haven't install the INTEL Android drivers?
let me search online and download it.
i will get back to you after i install the driver and try again
Thanks
banjicom said:
Oh my bad
I haven't install the INTEL Android drivers?
let me search online and download it.
i will get back to you after i install the driver and try again
Thanks
Click to expand...
Click to collapse
Link to INTEL ANDROID DRIVERS
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
dmilz said:
Link to INTEL ANDROID DRIVERS
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
Click to expand...
Click to collapse
:crying:
It is still doing the same thing, even after installing intel drivers. The cmd file just open and close immediately
banjicom said:
:crying:
It is still doing the same thing, even after installing intel drivers. The cmd file just open and close immediately
Click to expand...
Click to collapse
Ok..
Let me have a [email protected] it when I reach home.. Give me 2 hours
Will get back to you
dmilz said:
Ok..
Let me have a [email protected] it when I reach home.. Give me 2 hours
Will get back to you
Click to expand...
Click to collapse
Ok thanks so much
Download that .. Extract contents to the ROM filler you downloaded earlier.... Then run the CMD....
.https://mega.nz/#!4tFX1YrL!5h3FL-8mqtxquwO16SK5g-hkp3vYsOxsYmAWzotFvIQ
dmilz said:
Download that .. Extract contents to the ROM filler you downloaded earlier.... Then run the CMD....
.https://mega.nz/#!4tFX1YrL!5h3FL-8mqtxquwO16SK5g-hkp3vYsOxsYmAWzotFvIQ
Click to expand...
Click to collapse
Thanks very much, am just seeing your message. i will try it when i get back home and give you feedback
Ok
dmilz said:
Ok
Click to expand...
Click to collapse
1000,000 thanks to you dmilz, it works!!!!!
Thanks so much i really appreciate, i can now cutomize my tablet the way i like now with the stock android. Any idea on how i can root the tablet.
Once again a say thanks:good::good:
banjicom said:
1000,000 thanks to you dmilz, it works!!!!!
Thanks so much i really appreciate, i can now cutomize my tablet the way i like now with the stock android. Any idea on how i can root the tablet.
Once again a say thanks:good::good:
Click to expand...
Click to collapse
Am glad to here you have managed..
Root! Mmmm NO.I have no idea.. would have been easy to root if the Intel temporary recovery could work on this thing.
But .. You can give the Intel tethered recovery a try..if that works for you.. rooting will be as easy as 1-2
Hello Amigos,
Here is the Samsung Original Android 7.0 Firmware (Nougat) for our J7 Prime (G610M).
TPA-G610MUBU1BQI1-20170919095316.zip
This Firmware is from Panama (TPA) from my vast knowledge, this ROM should be unbranded. I will be flashing and uploading screenshots soon.
I am also sharing this so we can have cooks build ROM variants with flash files/fixes for our device which has a front FLASH.
Regards,
Paul
Paul_Days said:
Hello Amigos,
Here is the Samsung Original Android 7.0 Firmware (Nougat) for our J7 Prime (G610M).
TPA-G610MUBU1BQI1-20170919095316.zip
This Firmware is from Panama (TPA) from my vast knowledge, this ROM should be unbranded. I will be flashing and uploading screenshots soon.
I am also sharing this so we can have cooks build ROM variants with flash files/fixes for our device which has a front FLASH.
Regards,
Paul
Click to expand...
Click to collapse
Any news on performance? is it branded? I'm trying to download but the server is painfully slow on my end, around 25kbps so it might take a while.
Tuckycv said:
Any news on performance? is it branded? I'm trying to download but the server is painfully slow on my end, around 25kbps so it might take a while.
Click to expand...
Click to collapse
Yes, as I mentioned, this ROM is unbranded. It's clean, quick and has many features previously not on Marshmallow. Love that I can change the screen resolution/zoom, and natively the homescreen and app grid.
Do miss edge panel, hope someone makes a Note/S8 custom rom. Oh, from flash is working.
Paul
I cannot root this ROM, i've tried all methods:
- Sideloading the SuperSU via TWRP
- OneClickRoot
- KingRoot
- ROOT2SAM
I'm getting a verification error upon reboot causing me to hard reset.
Anyone gets root. Please share.
Paul_Days said:
I cannot root this ROM, i've tried all methods:
- Sideloading the SuperSU via TWRP
- OneClickRoot
- KingRoot
- ROOT2SAM
I'm getting a verification error upon reboot causing me to hard reset.
Anyone gets root. Please share.
Click to expand...
Click to collapse
format data and install super SU for nougat en TWRP
jlopez.scz said:
format data and install super SU for nougat en TWRP
Click to expand...
Click to collapse
I did, that was my first step, can you link me to the files you used?
Paul_Days said:
I did, that was my first step, can you link me to the files you used?
Click to expand...
Click to collapse
http://www.flashfilebd.com/2017/09/sm-g610f-nougat-7-root-file-free.html?m=1
For you information
Can I install this one on my J7 Prime purchased in Brazil?
ayrtinho said:
Can I install this one on my J7 Prime purchased in Brazil?
Click to expand...
Click to collapse
Yes
I am leaving a link to download direct to ROM without waiting time for dowloader, I even upei in mediafire just download and extract after that go to odin ...
link ROM 7.0 Panama mediafire:
http://www.mediafire.com/file/nw4m7....0_Panama_1_20170911232839_dqc4k5sku8_fac.zip
Video tutorial showing step by step how to install in portuguese, in the video I show process of downloading the rom using the samfirm more with this link that I did not need to use samfirm ...
https://www.youtube.com/watch?v=vRCIUsgYNgM
---------- Post added at 01:38 PM ---------- Previous post was at 01:35 PM ----------
Paul_Days said:
Hello Amigos,
Here is the Samsung Original Android 7.0 Firmware (Nougat) for our J7 Prime (G610M).
TPA-G610MUBU1BQI1-20170919095316.zip
This Firmware is from Panama (TPA) from my vast knowledge, this ROM should be unbranded. I will be flashing and uploading screenshots soon.
I am also sharing this so we can have cooks build ROM variants with flash files/fixes for our device which has a front FLASH.
Regards,
Paul
Click to expand...
Click to collapse
I am leaving a link to download direct to ROM without waiting time for dowloader, I even upei in mediafire just download and extract after that go to odin ...
link ROM 7.0 Panama mediafire:
http://www.mediafire.com/file/nw4m7j...k5sku8_fac.zip
Video tutorial showing step by step how to install in portuguese, in the video I show process of downloading the rom using the samfirm more with this link that I did not need to use samfirm ...
https://www.youtube.com/watch?v=vRCIUsgYNgM
Thanks for uploading to mediafire. Both sammobile and updato would have taken too long to download.
Respected Developers,
I need to flash my micromax q402+ because it is locked by a company to use specific sim. Since it is a spreadtrum SC9832 device I found it's stock rom with .pac extension. I tried flashing with SPD tools but no luck. It is giving "UART send error"
What are the other methods to flash?
Please guide me with other methods of flashing.
Sent from my Redmi Note 4 using Tapatalk
Strange! Still no response.
Sent from my Redmi Note 4 using Tapatalk
SkpMech said:
Strange! Still no response.
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
i have ported the stock rom of origional micromax q402+ for this cg sky phone if you need you can pm me. i am going to make a thread for this phone.
SkpMech said:
Respected Developers,
I need to flash my micromax q402+ because it is locked by a company to use specific sim. Since it is a spreadtrum SC9832 device I found it's stock rom with .pac extension. I tried flashing with SPD tools but no luck. It is giving "UART send error"
What are the other methods to flash?
Please guide me with other methods of flashing.
Click to expand...
Click to collapse
You need to download its modified rom by (cg sky) (different H/W 5.0 & S/W 3.0). You can search for this rom in net.
I have downloaded it somewhere in net , gsmdevloper site(i m not sure).
shankar1790 said:
i have ported the stock rom of origional micromax q402+ for this cg sky phone if you need you can pm me. i am going to make a thread for this phone.
Click to expand...
Click to collapse
Yes Please make a thread
Sent from my Redmi Note 4 using Tapatalk
shankar1790 said:
You need to download its modified rom by (cg sky) (different H/W 5.0 & S/W 3.0). You can search for this rom in net.
I have downloaded it somewhere in net , gsmdevloper site(i m not sure).
Click to expand...
Click to collapse
I searched but didn't got the rom. Please provide the link. Thanks
Sent from my Redmi Note 4 using Tapatalk
SkpMech said:
I searched but didn't got the rom. Please provide the link. Thanks
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
here is the link, it is password protected but don't worry password is -MCS.SOLUTIONS
https://drive.google.com/uc?id=1Yl41YEJZqPcfXD_IS13Fqzis3fTGRjZ8&export=download
"if its help you press thanks button"
---------- Post added at 08:19 AM ---------- Previous post was at 08:09 AM ----------
SkpMech said:
Yes Please make a thread
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
here is the thread
https://forum.xda-developers.com/android/general/stock-deodexed-rom-micromax-q402-plus-t3917765
version 1.1 is coming soon. it is in testing phase because some apps gives fc ( i will solve this issue )
and added some ported apps . i hope you should like it.
Press thanks button if you find this helful
shankar1790 said:
here is the link, it is password protected but don't worry password is -MCS.SOLUTIONS
https://drive.google.com/uc?id=1Yl41YEJZqPcfXD_IS13Fqzis3fTGRjZ8&export=download
"if its help you press thanks button"
---------- Post added at 08:19 AM ---------- Previous post was at 08:09 AM ----------
here is the thread
https://forum.xda-developers.com/android/general/stock-deodexed-rom-micromax-q402-plus-t3917765
version 1.1 is coming soon. it is in testing phase because some apps gives fc ( i will solve this issue )
and added some ported apps . i hope you should like it.
Press thanks button if you find this helful
Click to expand...
Click to collapse
Thank you so much. I appreciate your work.
But the google drive file is of 1GB while the ROM in your seperate thread is of 700MB. Which one to use?
Sent from my Redmi Note 4 using Tapatalk
SkpMech said:
Thank you so much. I appreciate your work.
But the google drive file is of 1GB while the ROM in your seperate thread is of 700MB. Which one to use?
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
the rom in link is origional stock rom(PAC format) of cg sky phone . in case of anything goes wrong to your device then you can simply flash this rom in Research download tool. (the rom ,which your device currently running with locked jio sim)
And the ROM i have ported is official stock rom of micromax q402 + without any resrtiction of jio sim and internet.
that is the difference.
"" I tried flashing with SPD tools but no luck. It is giving "UART send error"
What are the other methods to flash? ""
this error happens because the software is not compatible to its modified hardware and software version.
shankar1790 said:
the rom in link is origional stock rom(PAC format) of cg sky phone . in case of anything goes wrong to your device then you can simply flash this rom in Research download tool. (the rom ,which your device currently running with locked jio sim)
And the ROM i have ported is official stock rom of micromax q402 + without any resrtiction of jio sim and internet.
that is the difference.
"" I tried flashing with SPD tools but no luck. It is giving "UART send error"
What are the other methods to flash? ""
this error happens because the software is not compatible to its modified hardware and software version.
if you want unlocked rom than you follow the instruction in my thread.
if the procedure is in my thread is not understandable or look boring to you ,then i will make a simple ROM with PAC extension so it can easily flashable with Research tool. But it need unlock bootloader (you can follow my other thread for instruction)
for you i will make another thread for RDT for pac format rom
if you stuck in any step
Click to expand...
Click to collapse
I had unlocked the bootloader long time ago. I will follow the steps for flashing ported ROM.
Thank you for your support.
Sent from my Redmi Note 4 using Tapatalk
You also need patched boot.img to boot the Rom. You have to patch your boot.img to remove dm-verity & force encryption(for twrp only)so it can load ported OS.
You can patch your boot.img manually or magisk method.
SkpMech said:
Respected Developers,
I need to flash my micromax q402+ because it is locked by a company to use specific sim. Since it is a spreadtrum SC9832 device I found it's stock rom with .pac extension. I tried flashing with SPD tools but no luck. It is giving "UART send error"
What are the other methods to flash?
Please guide me with other methods of flashing.
Click to expand...
Click to collapse
Ver 1.1 is out there you can check in my thread. You can see the changlogs.
And another good news is i have successfully ported evercross m50 star Rom to this device (micromax q402+) this rom is theme supported and nice looking very smooth UI.
Everything working flawlessly . I will make new thred or update previous. ( upload soon)
Link not working
The Rom link you have given is not working. 404 bad request apear in download link
Kishorpatel2689 said:
The Rom link you have given is not working. 404 bad request apear in download link
Click to expand...
Click to collapse
Wich link bro
Dear sir the link you have given is not working
Google drive link not working, where modified rom link is available for download
---------- Post added at 09:07 AM ---------- Previous post was at 09:03 AM ----------
This link is not working
here is the link, it is password protected but don't worry password is -MCS.SOLUTIONS
https://drive.google.com/uc?id=1Yl41...xport=download
"if its help you press thanks button"
Kishorpatel2689 said:
Google drive link not working, where modified rom link is available for download
---------- Post added at 09:07 AM ---------- Previous post was at 09:03 AM ----------
This link is not working
here is the link, it is password protected but don't worry password is -MCS.SOLUTIONS
https://drive.google.com/uc?id=1Yl41...xport=download
"if its help you press thanks button"
Click to expand...
Click to collapse
Sorry to say you but that file is uploaded by someone else .I have just shared it here.modified ROMs are ported and shared by me. The link you have asking for is cg sky rom. That is the original stock ROM comes preinstalled.
bro link is still working.