Need Help!! Realme 1 stuck at Orange State Your phone is Unloaked & no longer secured
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
SarvinBatra said:
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
Click to expand...
Click to collapse
did you update your device with latest update before doing root?
are you able to go to recovery mod ? if yes
format your device and see..
abhi.s4u said:
did you update your device with latest update before doing root?
are you able to go to recovery mod ? if yes
format your device and see..
Click to expand...
Click to collapse
Yes it was updated to the Latest version. In recovery mode i see only Reboot, Turn off and Wipe data option i tried each one of them but as soon as phone start the same loop start again.
help
same problem bro please anyone can provie full backup without using of oppo download tool as it requires staff account :crying:
SarvinBatra said:
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
Click to expand...
Click to collapse
Bro Provide me your whatsapp number as only be can help each other for fixing realme 1
need help asap
mine too same problem.. wiped data tried installing ota using sd card but no success finally installation failed,again I tried online updating via Wi-Fi it shows no downloadable version detected tried flashing .ofp firmware without any luck it shows encod data checksum error,incorrect scatter file format bla bla bla.. I'm tired of this ****.. gys plez help
Same here..tried flashing using download tool but cnt,,any help appreciated
Hard Brick Fix(Not Hard Brick Actually)
Step 1:
Just download miracle box and install it on your pc
Step2:
Download scatter file, recovery img and boot img keep all of them in one folder and then
Step3:
Follow flash stock ROM guide
Recovery :
https://mega.nz/#!QgRDGYZD!3vaot9F9A...FbeRv1BXq5jwWU
Boot:https://mega.nz/#!AlRXnQ4a!VNE1a3xRc...Kwd4L1BnAfzArs
Scatter:https://mega.nz/#!JtZzlAib!OoICrY7n8..._AWUNgMMFIz1us
Miracle Box:https://mega.nz/#!lVsQGSaC!6TTJopMyn...Ibhx2qWL_ZqDyI
Rename boot.IMG to boot.bin like and place recovery.bin,boot.bin ,scatter.bin in same folder
Credits @anuragroy
Flashing Part:
Now : Install Miracle Box > launch > go to MTK > click services > select Write from the available options > select mtk 6771 from boot options > then fron second option select realme 1 > then load mtk 6771 scatter file > check skip preloader file > then hit start
Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
Now hold power button, your phone should boot normally
Thanks to @Hamza417 for tutorial
abhi.s4u said:
Hard Brick Fix(Not Hard Brick Actually)
Step 1:
Just download miracle box and install it on your pc
Step2:
Download scatter file, recovery img and boot img keep all of them in one folder and then
Step3:
Follow flash stock ROM guide
Recovery :
https://mega.nz/#!QgRDGYZD!3vaot9F9A...FbeRv1BXq5jwWU
Boot:https://mega.nz/#!AlRXnQ4a!VNE1a3xRc...Kwd4L1BnAfzArs
Scatter:https://mega.nz/#!JtZzlAib!OoICrY7n8..._AWUNgMMFIz1us
Miracle Box:https://mega.nz/#!lVsQGSaC!6TTJopMyn...Ibhx2qWL_ZqDyI
Rename boot.IMG to boot.bin like and place recovery.bin,boot.bin ,scatter.bin in same folder
Credits @anuragroy
Flashing Part:
Now : Install Miracle Box > launch > go to MTK > click services > select Write from the available options > select mtk 6771 from boot options > then fron second option select realme 1 > then load mtk 6771 scatter file > check skip preloader file > then hit start
Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
Now hold power button, your phone should boot normally
Thanks to @Hamza417 for tutorial
Click to expand...
Click to collapse
Hello, I am not able to download the files from the mega link, Its not loading, and when I open the link with VPN, it says wrong decryption key, Can you please upload the files to Google Drive or something else?
adityadtr said:
Hello, I am not able to download the files from the mega link, Its not loading, and when I open the link with VPN, it says wrong decryption key, Can you please upload the files to Google Drive or something else?
Click to expand...
Click to collapse
sorry bro i don't have backup of links...
go through this link u have to
download whole stock rom... i haven't tested it so do it on your own risk..
Mod edit: Link removed
Hello, I know i'm a bit late on this I had this problem recently and found out that flashing the latest ota update gets rid of the problem. The message wont disappear but the phone will boot properly. Just download the latest OTA update from the realme website and put it in you sd card and flash it from recovery. Also protip everytime you flash a file reboot manually not from adb fastboot as that leads to the bootloop.
Hope it helps.
after downloading latest OTA from realme website and tried flashing using recovery mode. installation failed is showing? sombody help!
---------- Post added at 06:31 PM ---------- Previous post was at 06:21 PM ----------
bidhan001 said:
mine too same problem.. wiped data tried installing ota using sd card but no success finally installation failed,again I tried online updating via Wi-Fi it shows no downloadable version detected tried flashing .ofp firmware without any luck it shows encod data checksum error,incorrect scatter file format bla bla bla.. I'm tired of this ****.. gys plez help
Click to expand...
Click to collapse
mine same problem, did you solved the problem now?
please help if sombody has working solution/method, let me know. my realme 1 also facing same problem and tried flashing latest OTA update from official site but no luck showing installation failed:crying::crying:.
abhi.s4u said:
Hard Brick Fix(Not Hard Brick Actually)
Step 1:
Just download miracle box and install it on your pc
Step2:
Download scatter file, recovery img and boot img keep all of them in one folder and then
Step3:
Follow flash stock ROM guide
Recovery :
https://mega.nz/#!QgRDGYZD!3vaot9F9A...FbeRv1BXq5jwWU
Boot:https://mega.nz/#!AlRXnQ4a!VNE1a3xRc...Kwd4L1BnAfzArs
Scatter:https://mega.nz/#!JtZzlAib!OoICrY7n8..._AWUNgMMFIz1us
Miracle Box:https://mega.nz/#!lVsQGSaC!6TTJopMyn...Ibhx2qWL_ZqDyI
Rename boot.IMG to boot.bin like and place recovery.bin,boot.bin ,scatter.bin in same folder
Credits @anuragroy
Flashing Part:
Now : Install Miracle Box > launch > go to MTK > click services > select Write from the available options > select mtk 6771 from boot options > then fron second option select realme 1 > then load mtk 6771 scatter file > check skip preloader file > then hit start
Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
Now hold power button, your phone should boot normally
Thanks to @Hamza417 for tutorial
Click to expand...
Click to collapse
Hey, I'm having the same problem, orange state bootloop. The mega links need paid account, while sp flash tool doesnt recognize the device. I am yet to find a version of the rom which has the scatter file. Miracle doesnt work because of the mega links. I am able to go to stock recovery, however, sd card installation says "installed version is older than current one" while wifi says no update available. Any help would be much appreciated.
StripsOfTatti said:
Hey, I'm having the same problem, orange state bootloop. The mega links need paid account, while sp flash tool doesnt recognize the device. I am yet to find a version of the rom which has the scatter file. Miracle doesnt work because of the mega links. I am able to go to stock recovery, however, sd card installation says "installed version is older than current one" while wifi says no update available. Any help would be much appreciated.
Click to expand...
Click to collapse
ok i hv find this video.. plz check
Mod edit: Link removed
SarvinBatra said:
I recently tried to Root My Realme 1 Phone It by following the Official Guide from here https://c.realme.com/in/post-details/1101401810746212352 . My phone was rooted Successfully but then i tried to Install magisk by this Guide https://forum.xda-developers.com/realme-1/development/official-method-root-realme-1-install-t3908030 now my Phone is Stuck at Orange State, Your Device is unlocked and can't be trusted, Your device will reboot in 5 second. This is playing again and Again. Even adb or Fastboot tool is not Detecting my device now.
Click to expand...
Click to collapse
Bro I have the same problem please help if u fixed it in phone when I opening the recovery mode it showing"Oppo verify pass fastboot_unlock_verify ok".
How to fix it bro
realme 1 problem
plz help me i cannot get into recovery mode on realme 1 and it is stuck in logo and orange state and restart over and over
I have same problem when i gone to REALME service centre they told me that we can not fix this because it is root and they were saying it can charge 5000-6000rs for motherboard and they said that it may be not work (Realme 1)
my phone is stuck on boot screen and i can not booting in recovery mod
what can i do please help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
please!please!please!please!please!please!please!please!please!please!please!please!please!please!please!please
same problem on realme u1
what should I do?
ASHISH12345677 said:
Bro Provide me your whatsapp number as only be can help each other for fixing realme 1
Click to expand...
Click to collapse
my number 7999809456 plzz help me out i am ready to pay u plzz
SarvinBatra said:
Yes it was updated to the Latest version. In recovery mode i see only Reboot, Turn off and Wipe data option i tried each one of them but as soon as phone start the same loop start again.
Click to expand...
Click to collapse
I was unlocked bootloader of Realme c2 and installed twrp patched file. Successfully installed. Now i unable to go to recovery mod. Showing ''5 second to reboot." And "Oppo verify pass ok". Please help me.
Related
The story begins when I had twrp. i flashed the oneplus_x_oxygenos_3.1.1_community_build usb debugging turned on, and oem unlocking. I was successful, I had stock oxygen OS but I lost twrp in doing so.
retried to install twrp, it did not work, when i tried going to recovery it's stuck on oneplus logo. i tried to fix it with this , did't notice it was for Oneplus 2, so.... hard bricked my phone, i was able to recover with this but i could not install twrp. so i installed the stock recovery MM which works now. OS does not work anymore. for some reason when i try to flash the oxygenos_3.1.1 with stock recovery, it still fails. even when i tried installing a lower version rom.
Can anybody help me? this is my daily driver phone. currently using my nokia feature phone for calls and texts......
what I have:
Stock recovery
nandroid backup that i cannot use because i don't have twrp,
usb debugging turned off,
and oem unlocking off.
can access fastboot, sideload.
no access to OS.
Hatred for Pokemon Go
yay it's alive!!
this worked for me! http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
moderator kindly delete my post. Thanks!
Don't know why people are still flashing community build with twrp. So much information on this. Yes we have a working twrp for 3.1.1 but that's for after its installed.
Exodusche said:
Don't know why people are still flashing community build with twrp. So much information on this. Yes we have a working twrp for 3.1.1 but that's for after its installed.
Click to expand...
Click to collapse
I guess some confusion might have been caused when it was posted on the OnePlus forums (and apparently a quote from a OnePlus rep) that the new build was "compatible" with TWRP. This was later clarified (by a poster, not OnePlus) to mean V41 of the blu-spark TWRP.
Chat with support confirms.
Kashaila said:
Sorry to keep you waiting. I apologize for the confusion. I have just confirmed from the specialist that TWRP is compatible with the new rollout.
Click to expand...
Click to collapse
https://forums.oneplus.net/threads/...nity-beta-for-oneplus-x.464812/#post-15231909
Perhaps the mistake arises because it is not clear was that whilst TWRP is compatible, you couldn't actually flash the new community build with it! TWRP is only compatible (like you say) AFTER the flash!!
https://tapatalk.com/shareLink?url=...share_tid=3464987&share_fid=3793&share_type=t
[guide] unbrick device
This should help...
The solution for OPX hardbrick is similar to OPO and OP2 - you just need a Qualcomm driver and a recover package.
So,here we go !!
Step 1 :- DOWNLOADS :-
1.) Drivers :- https://www.androidfilehost.com/?fid=24052804347799753 (Extract these files to a folder on desktop.)
2.) Recovery Tool :- https://drive.google.com/folderview?...XM&usp=sharing (Download all files inside this folder and put them in a folder on desktop.)
Step 2 :- If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :- http://www.howtogeek.com/167723/how-...igned-drivers/
Step 3 :- Press the power button for 40 seconds to turn off the phone.
Step 4 :- Press only volume up button for 10 sec and then power button. While keeping them pressed,connect OPX to PC.Hold volume up until your PC finds a new hardware .
Step 5 :- Go to device manager in your PC, find the new "QUALCOMM-HS USB Diagnostics xxxx" device or something like this (It must be Unknown Devices as QHUSB_BULK or under COMs and Ports as Qualcomm xxxx). Update its driver in property page using the Qualcomm driver provided (for 32bit windows, select x86 folder; for 64bit windows, select x64 folder).
Step 6 :- After installing the drivers,"Run As Administrator" the MSMDownloadToolV2.0 in the recovery tools folder.
Step 7 :- Click start at top left corner and wait for it to finish (Download Complete will come)
Step 8 :- Disconnect phone from PC and boot into system.
Now you can again do anything you wish to (unlock bootloader,etc).To unlock bootloader,go to developer options and tick "Enable OEM Unlock" first.
When you will need this guide ? :-
1.) If your phone is totally black (no racism)
2.) When you have locked the bootloader by mistake . (This happens when you flash a rom without having oem unlocking enabled.)
PS:- This method will wipe all data and restore your phone to OxygenOS and English Bootloader.
Thanks.
Hi, i can' get the qualcomm driver installed. It says like the hash isn't in the catalog and that it is damaged or messed with.
The Driver Signature is turned off in W10, so do you know something?
Also there is no communication with fastboot, i can boot to it, to the fb logo on the opx, but no way to get contact.
Thanks
tjeus said:
Hi, i can' get the qualcomm driver installed. It says like the hash isn't in the catalog and that it is damaged or messed with.
The Driver Signature is turned off in W10, so do you know something?
Also there is no communication with fastboot, i can boot to it, to the fb logo on the opx, but no way to get contact.
Thanks
Click to expand...
Click to collapse
Change computer.
Try with an old windows 7.
Or, try this: http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
Iirc, it's the same for Windows 10.
Sent from my ONE E1003 using Tapatalk
Himanshu Gusai said:
The solution for OPX hardbrick is similar to OPO and OP2 - you just need a Qualcomm driver and a recover package.
So,here we go !!
Step 1 :- DOWNLOADS :-
1.) Drivers :- https://www.androidfilehost.com/?fid=24052804347799753 (Extract these files to a folder on desktop.)
2.) Recovery Tool :- https://drive.google.com/folderview?...XM&usp=sharing (Download all files inside this folder and put them in a folder on desktop.)
Step 2 :- If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :- http://www.howtogeek.com/167723/how-...igned-drivers/
Step 3 :- Press the power button for 40 seconds to turn off the phone.
Step 4 :- Press only volume up button for 10 sec and then power button. While keeping them pressed,connect OPX to PC.Hold volume up until your PC finds a new hardware .
Step 5 :- Go to device manager in your PC, find the new "QUALCOMM-HS USB Diagnostics xxxx" device or something like this (It must be Unknown Devices as QHUSB_BULK or under COMs and Ports as Qualcomm xxxx). Update its driver in property page using the Qualcomm driver provided (for 32bit windows, select x86 folder; for 64bit windows, select x64 folder).
Step 6 :- After installing the drivers,"Run As Administrator" the MSMDownloadToolV2.0 in the recovery tools folder.
Step 7 :- Click start at top left corner and wait for it to finish (Download Complete will come)
Step 8 :- Disconnect phone from PC and boot into system.
Now you can again do anything you wish to (unlock bootloader,etc).To unlock bootloader,go to developer options and tick "Enable OEM Unlock" first.
When you will need this guide ? :-
1.) If your phone is totally black (no racism)
2.) When you have locked the bootloader by mistake . (This happens when you flash a rom without having oem unlocking enabled.)
PS:- This method will wipe all data and restore your phone to OxygenOS and English Bootloader.
Thanks.
Click to expand...
Click to collapse
Hello, i have similar problem.
I tried to flash sultan rom on top of cm13 nightly, but before flashing i wiped everything, system,data, cache etc.
Then i went to flash sultan(with twrp, can't remember the version but i think it was new one), i had to change update script in .zip file to ONE before i could flash it.
Then when it flashed i tried to restart but it said no system.
I decided not to restart and flash OOS 3.1.3, it flashed and restarted...but it was constantly restarting, logo would show and 1 sec after it would restart, and it stuck in a loop. No recovery, no fastboot...
With a guide above i managed to get it to install recovery and rom, but when booting, after loading android apps, it would just say finishing boot and restart again...
So i had recovery and tried to flash a new recovery but bootloader is locked, and cannot be unlocked because, oem unlock is disabled....
I tried to flash OOS 3.1.3 with stock recovery but after clicking YES for flashing phone turned off. When i tried to turn it on it only shows logo, nothing booting....
And now when i try to use MSM Download tool everything is done but phone still doesn't boot anything at all......now it won't even get to the part with loading android apps.....
Can anyone help?? Could someone please upload recovery.img and system.img that i could put in MSM folder, maybe if it would flash that files it would work?
Is there any other way to set oem unlock to enabled without developer options???
help help help
Ovakisan said:
Hello, i have similar problem.
I tried to flash sultan rom on top of cm13 nightly, but before flashing i wiped everything, system,data, cache work?
Is there any other way to set oem unlock to enabled without developer options???
help help help
Click to expand...
Click to collapse
The part when it said no system you would of been fine if you just let it boot. Did you wipe before flashing 3.1.3 after Sultan? You need to get old stock recovery to flash 3.1.3. Whether that be thru fastboot or using the unbrick guide.
Once you have booted 3.1.3 you can continue with fastboor flashing one of the updated twrp's (Sultans,blu sparksv41,Nachets.)
Exodusche said:
The part when it said no system you would of been fine if you just let it boot. Did you wipe before flashing 3.1.3 after Sultan? You need to get old stock recovery to flash 3.1.3. Whether that be thru fastboot or using the unbrick guide.
Once you have booted 3.1.3 you can continue with fastboor flashing one of the updated twrp's (Sultans,blu sparksv41,Nachets.)
Click to expand...
Click to collapse
I did wipe yes, but within twrp not stock recovery, so that is what f**ed it up :/
Thru fastboot i can't do anything because bootloader is locked and cannot be unlocked. unbrick guide just boots, updates and starts android applications and then restarts.
A few minutes ago it managed to get into setup wizard, and i went skip skip skip just to get into settings and before i got in freaking thing restarted and now is again starting aplications in a loop......
Could i use different img files with MSM downloader? Where can i read more about msm downloader app and what it does?
Ovakisan said:
I did wipe yes, but within twrp not stock recovery, so that is what f**ed it up :/
Thru fastboot i can't do anything because bootloader is locked and cannot be unlocked. unbrick guide just boots, updates and starts android applications and then restarts.
A few minutes ago it managed to get into setup wizard, and i went skip skip skip just to get into settings and before i got in freaking thing restarted and now is again starting aplications in a loop......
Could i use different img files with MSM downloader? Where can i read more about msm downloader app and what it does?
Click to expand...
Click to collapse
Can't you go through the steps to unlock bootloader now that you've done the hard brick guide? I'm not sure bro someone will help you.
Exodusche said:
Can't you go through the steps to unlock bootloader now that you've done the hard brick guide? I'm not sure bro someone will help you.
Click to expand...
Click to collapse
The problem is that after going through guide, MSM downloader would say that its done, and it wouldn't boot in android, sou you can't get into developers options to enable OEM unlocking. And throught fastboot you can't do anything because its not enabled...
anyway if anyone is reading this that has same issue, just don't stop restarting, this little fu**** just managed to boot into android and i managed to get into dev options(after 3-4 restart, and 1 wipe cache data in stock recovery). after setting OEM unlock to enabled i tried to shut down phone through normal shutdown procedure but it got stuck, but force shut down with button worked and it saved OEM unlocking option on enabled. so i managed to unlock bootloader with fastboot.
So im with stock recovery now, lollipop ROM, should i try to flash OOS 3.1.3 now, or do i have to do something else prior to flashing????
I'm kind of scared now to do anything :'D
EDIT: ok, i ran into problem again -.-
twrp is flashed, latest. now when i try to flash cm13 or sultans cm13 i get this error.
http://imgur.com/a/BSpK1
Hi All,
Really annoying self inflicted problem, changed the swipe code, forgot it, google account ADM wont reset phone, no sequence of button pressing gets phone into recovery mode, USB debugging appears to be off. How can I save my phone??!??!?!?!? What sequence should I follow, what ROM should I install, need a step by step if at all possible, complete newbie!!1? Thanks in advance.
Jacko110 said:
Hi All,
Really annoying self inflicted problem, changed the swipe code, forgot it, google account ADM wont reset phone, no sequence of button pressing gets phone into recovery mode, USB debugging appears to be off. How can I save my phone??!??!?!?!? What sequence should I follow, what ROM should I install, need a step by step if at all possible, complete newbie!!1? Thanks in advance.
Click to expand...
Click to collapse
ok you are most likely on 20160810 where recovery does not work.
you are most likely on windows 10 as well. first lets find a rom where recovery works.
We can use 20160810 rom and wipe userdata partition..
Here is the download link https://mega.nz/#!ys4DTIxa!8rrL0aktVQ8W7Q4Et8fvQ8jk2tAxLZvJOJH48S9Vkyk .
Once you have finished downloading you should then extract it to a folder.
Next we need to prepare your computer for the flashing process by installing the correct drivers.
look in this thread http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042 scroll for your version of windows. follow the instructions and everything should work.
If you dont have add hardware option in windows then hit windows button and r and enter hdwwiz.exe.
now you have installed the drivers we need to download sp flash tools which is what we need to install the rom.
So go this website http://spflashtool.com/ now click on the first download link 'SPFlash Tool 5.1628' .
this will download a zip file. again extract it to a new folder. ok now you need to go in the flash tool and run flash_tool.exe by just clicking on it. now the software will load up.
You need to load the scatter file from the rom folder. The scatter file should be outside the encrypt folder and should be called MT6755_Android_scatter.txt . Now the rom should be loaded. You have some more options here, you can either untick all boxes and leave userdata (where your security and codes are stored) ticked or you can leave everything ticked which would flash the rom again. So once you have decided what option you have you need to turn your phone off. you then need to click download in flash tools and then connect your phone to the pc and hold the vol+ button. Then wait for it to flash, once the box with the tick opens you can close the program and restart your phone.
no recovery
there is no recovery in this build.........you have to flash one of your own.....
No recovery
Thank you, will start trying now and let you know.
Success!
Pro4TLZZ said:
ok you are most likely on 20160810 where recovery does not work.
you are most likely on windows 10 as well. first lets find a rom where recovery works.
We can use 20160810 rom and wipe userdata partition..
Here is the download link https://mega.nz/#!ys4DTIxa!8rrL0aktVQ8W7Q4Et8fvQ8jk2tAxLZvJOJH48S9Vkyk .
Once you have finished downloading you should then extract it to a folder.
Next we need to prepare your computer for the flashing process by installing the correct drivers.
look in this thread http://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042 scroll for your version of windows. follow the instructions and everything should work.
If you dont have add hardware option in windows then hit windows button and r and enter hdwwiz.exe.
now you have installed the drivers we need to download sp flash tools which is what we need to install the rom.
So go this website http://spflashtool.com/ now click on the first download link 'SPFlash Tool 5.1628' .
this will download a zip file. again extract it to a new folder. ok now you need to go in the flash tool and run flash_tool.exe by just clicking on it. now the software will load up.
You need to load the scatter file from the rom folder. The scatter file should be outside the encrypt folder and should be called MT6755_Android_scatter.txt . Now the rom should be loaded. You have some more options here, you can either untick all boxes and leave userdata (where your security and codes are stored) ticked or you can leave everything ticked which would flash the rom again. So once you have decided what option you have you need to turn your phone off. you then need to click download in flash tools and then connect your phone to the pc and hold the vol+ button. Then wait for it to flash, once the box with the tick opens you can close the program and restart your phone.
Click to expand...
Click to collapse
Thank you soo much, all sorted. Take it that I can now use these tools and newly gained knowledge to upgrade OS???
Jacko110 said:
Thank you soo much, all sorted. Take it that I can now use these tools and newly gained knowledge to upgrade OS???
Click to expand...
Click to collapse
You can but be careful as you could damage your phone
Has anyone got a link to a custom recovery I can flash on to p9000 running latest ROM
haidar123 said:
Has anyone got a link to a custom recovery I can flash on to p9000 running latest ROM
Click to expand...
Click to collapse
http://forum.xda-developers.com/ele...nofficial-twrp-elephone-p9000-t3426678/page11 use a p9000 scatter file
Hi,
I have the same problem with my P9000 : Elephone_P9000_20160810, I even cannot install the last update 20170112 because the recovery mode is not working. but I use Linux mint on my laptop.
I already downloaded the Linux version of the flashing tool, give it a try but at the time of the flashing my laptop freeze. Scarred to death, I restarted my phone, no damage done, but now, after stay away from the idea the time to recover from my post traumatic syndrome disorder, I am ready to try again with the help of peoples knows what they are doing.
What are the points I have to be aware using Linux mint when I follow this tutorial.
Thanks for your time
New Recovery File
Need to use this one. I had the same problems https://redirect.viglink.com/?format=go&jsonp=vglnk_148541845062211&key=f0a7f91912ae2b52e0700f73990eb321&libId=iye3se1601000n4o000DA1jol7bnvwro0d&loc=https%3A%2F%2Fforum.xda-developers.com%2Fsitesearch.php%3Fq%3Dp9000%2520twrp%2520unofficial&v=1&out=https%3A%2F%2Fwww.google.com%2Furl%3Fq%3Dhttps%3A%2F%2Fforum.xda-developers.com%2Felephone-p9000%2Fdevelopment%2Frecovery-unofficial-twrp-elephone-p9000-t3426678%26sa%3DU%26ved%3D0ahUKEwiR2N_0rt_RAhUF5xoKHQaCAEUQFggEMAA%26client%3Dinternal-uds-cse%26usg%3DAFQjCNEDufTDo_BhHEYeYoUxe8gtq12xsw&title=General%20Search&txt=%5BRECOVERY%5D%20%3Cb%3EUnofficial%20TWRP%3C%2Fb%3E%20for%20Elephone%20%3Cb%3EP9000%3C%2Fb%3E%203.0.2-8
As someone who has done this a few times - and forgotten this vital step almost every time, just a reminder that when using SPFlash Tool - after you set up the scatter file, you click on download so that it is trying to communicate with the phone before you even plug the cable into the phone, then with your phone turned off you hold Vol+ as you plug in the cable. It should send the file almost instantly.
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
redminote3 said:
you have to boot in to EDL through fastboot using edl.bat, then flash with MiFlash your fastboot rom
Click to expand...
Click to collapse
But my pc dont see phone (mi pc suite , and mi flash ) .
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
still problem
redminote3 said:
Try installing universal ADB drivers...or try different PC...this must be a drivers problem.
Click to expand...
Click to collapse
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
innynizty said:
when i use fastboot mode on phone and connect to pc its ok ( Android device connect). But when i want to connect to mi pc suite i have error : device isnt supported . Pls help me im really green about this problems ..
Click to expand...
Click to collapse
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
innynizty said:
Write me pls step by step what i should to do bcs im really green with this phone and dont want to kill my xi :crying:
Click to expand...
Click to collapse
which miflash version used for now? pls ensure you use 201604xx (64 bit only) or 20160830 (32/64 bit)
to flash device, already bunch of guide on guide section. pls do some research there.
to unlock your phone, you can follow below unofficial ways or official ways which require to apply to mi server
en.miui.com/thread-253680-1-1.html
abihary said:
check your bootloader, it seem you relock your bootloader. if yes, you can unlock it using miunlock & reboot into rom.
Click to expand...
Click to collapse
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
innynizty said:
Hello all ! Sry for my english but i think you can understand me
The problem is with my phone. :crying:!
I wanted to get the MIUI rom but when i install in twrp and reebot phone they stands in the place . I can only see logo all the time, nothings happen ;/
. I cant enter the recovery, only i cna see flashing logo and phone switches off. What can I do ?
All I know is I can enable fastboot mode :c
Help me please :C
Click to expand...
Click to collapse
The solution is here:
download the required files from the given link: [50mb]
https://mega.nz/#!1NhDTQoR!cP7vrchwswOfj3oHQ5saZ2d0JkcmunEn5pqyOcpZDoE
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
[email protected] said:
Wait don't worry I will be uploading the correct files and procedure for doing that.
The thing is your phone is bricked and nothing to do now right.?
Theres a solution wait... Uploading that
---------- Post added at 10:54 AM ---------- Previous post was at 10:40 AM ----------
The solution is here:
download the required files from the given link: [50mb]
https://drive.google.com/file/d/0B8198j2pU-9ZcjVFZjFkLVAtT1E/view?usp=drivesdk
INSTRUCTIONS: [redmi note 3]
1. Get into fastboot mode. Charge the phone first. Hold the power button and the volume down button simultaenously.
2. If you can open your current rom, open developer options by clicking on the build no several times in the about phone menu in settings. and select allow oem unlocking and usb debugging.
3. if not leave it... go on and connect your phone to the PC while in fastboot mode.
BUT, before that: open Command prompt on your PC. (search it on the search box). right click on it and open it in administrator mode.
type in: bcdedit /set testsigning on
hit enter and restart your pc
(this is imp.)
4. open the zip file and extract the contents. open the boot edl mode folder and click the edl.bat file. allow it to run.
5. now screen will turn black, do not disturb it. Now flash the twrp by running flash twrp.bat from the 'flash TWRP' folder.
6. Now go to Unlock folder and run the unlock bootloader.bat file.
your phone will boot into the TWRP recovery mode automatically.
if it opens in chineese you select every tab and find the globe icon.
if the globe icon is found on any of the tab select it and change the language to ENGLISH.
wipe your system from the wipe tab:
Now download the latest CM13 SNAPSHOT BUILD ROM FOR YOUR REDMI:
https://download.cyanogenmod.org/get/kenzo-snapshot.zip
and GAPPS:
http://opengapps.org/?api=6.0&variant=mini
do select the arm 64 version and mini one.
download from your pc and copy it to micro sd card. enter this card into you phone and go to mount in twrp.
mount the micro sd card storage.
select the zip file on the micro sd card from the install tab on twrp and flash it.
now go back and flash open gapps zip file.
now REBOOT to system. everything will work fine....
See the following overview video after installing the CM13 ROM:
https://www.youtube.com/watch?v=T--f7ClmQVM
Click to expand...
Click to collapse
When i click on edl they only shows me " waiting for device" ?
innynizty said:
When i click on edl they only shows me " waiting for device" ?
Click to expand...
Click to collapse
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
[email protected] said:
Did you enabled OEM unlocking and android debugging in developer option.
And did you connect your phone to PC while in fast boot mode.?
This may be the problem otherwise it does well
Click to expand...
Click to collapse
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
innynizty said:
tell me how i can do this if i can only enable fastboot mode , when i want turn on my phone they stuck in mi logo ?
Click to expand...
Click to collapse
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
[email protected] said:
Oh you are in a different problem...
This has happened to me...
Wait I m sending the video link how to fix this...
It will fix everything... If anywhere it causes problem tell me immediately.
Link to solution. [Follow each and every step]
Get 2 GB data ready.
You have to start from beginning
Now if you want to install cm13 ROM then follow my above instructions...
Hope it can help
If not I will find you other way out
Click to expand...
Click to collapse
I cant turn on my phone and enable nothink , i know how to root phone and other .
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
[email protected] said:
Then try this....
I don't know how you bricked your phone without turning OEM unlock and debug....!!?
Click to expand...
Click to collapse
I try to install miui and then my phone stuck in xiaomi logo ;/
innynizty said:
I try to install miui and then my phone stuck in xiaomi logo ;/
Click to expand...
Click to collapse
It means it has no ROM installed now....
Even without that turning on you could boot into edl and unlock and flash twrp..
Don't know... Try again and search on net.. Now
Im also facing same issue???
Sent from my ASUS_T00J using Tapatalk
Do like people write before and Its easy to repair, Thanks boys
1-step
in order to root these qilive devices you will need...
magisk manager apk v5.6.4
stock boot.img file
working ADB to unlock oem and flash
2-step
lets get to it
place the magisk.apk and the stock boot.img
in the internal memory of your phone (downloads)
if you like to keep stuff organized :good:
3-step
follow the vídeo tutorial and use magisk manager
to patch your stock boot.img it will output a new
boot.img that includes magisk Root (patched_boot.img)
https://www.youtube.com/watch?v=BF4_hnKgjFA
ps: major ty to hovatek team for this great tutorial
step-4 use Google drive or usb OTG to get the patched_
boot.img to your PC and place it in the ADB folder
once you have oem(bootloader) unlocked just
rename the patched_boot.img to boot.img
step-5
unlock oem, these qilive devices wont unlock
the bootloader even if you enable it in DEV options
enable USB debug in dev options
you will need to use ADB commands
command- adb devices
serial appears
command- adb reboot bootloader
phone reboots to fastboot mode
command- fastboot devices
serial appears
command- fastboot oem unlock
(MAJOR WARNING the fastboot
oem unlock will wipe/reset/factoryreset/delete your data)
after you give the command small letters will appear
on the phone screen(yes or no) hard to read dont be hasty plz
use VOLUME+ to select and VOLUME - to confirm
note: when my phone ended the unlock it whent back to
that black screen where you choose fastboot-recovery-restart
and was stuck there, side keys did nothing if this happens
just long press the power key for 10 sec it will shutdown
then press power again to turn on
first boot after unlock will take longer then normal dont freakout
after you unlock small letters will appear during boot up saying the device
is not safe unlocked ,you can later use ( fastboot oem lock )
step-6
flash the patched boot.img with ADB
command- adb devices
serial appears
command- adb reboot bootloader
phone reboots to fastboot mode
command- fastboot devices
serial appears
command- fastboot flash boot boot.img
finished/ok
command- fastboot reboot
and voila you should now have magisk
installed in the app drawer, open it!!
step-7 run the install one final time from the
magisk manager and install magisk V16 using
recomended option it will verify/patch the boot image
Do NOT select the AVB 2.0 BOX it will bootloop the phone
and your done, enjoy your qilive rooted phone.
from this point on you can use the fastboot
command- fastboot oem lock
to remove the letters in boot up about the
device not safe unlocked
WARNING oem lock
will WIPE/FACTORY RESET again (god damn it!!)
ps: i had to install twice in a row,major pain in the ....
Repeat step 7 after Wipe/Reset
here is the stock boot for 2 qilive models
you can get the stock firmware for any qilive
at this site www.doc-doapi.com/EM/qilive/smartph...te_3m-fdd-cs_mul_20170818-110645_songlixin_PC
and get the recovery or boot from the unpacked firmware file
ps:my phone is the Q8SIN4GP AND ITS WORKING FINE
A VERY SPECIAL TY to topjohnwu (magisk creator), this man is nothing
short of a God damn genius!! , and if you can donate to him.
hope this helps other qilive users to root:highfive:
quick note on the qilive models, they have two model names
the cliente name in my case Q8SIN4GP
and the factory name in my model its 882912
in order to download the right firmware for your model
you need the factory model witch is what appears in the qilive
site above, it will be in the back of the phone or the original
box on a sticker just bellow the bar code, full model exempl
:Q8SIN4GP/882912 my firmware serves several models,
these Q8 models all start with 88xxxx WARNING
dont try this using the wrong firmware/boot file or you will DAMAGE your phone
Help with BOOTLOOP problems, if you find your self stuck in a bootloop
the phone wont go past the qilive logo and just stays there, dont freak out
you will loose your data but there is a way out
just keep pressing power + Volume up until a black screen with 3 options appears
when it does let go, use Volume + to select option and Volume - to confirm
select Fastboot or alternative select recovery and then select reboot to bootloader
both option will place your phone in Fastboot mode, once in fastboot mode
connect your phone to PC and use ADB commands to fix/bootloop
command- fastboot devices
serial appears
command- fastboot oem unlock (skip this if you use phone unlocked)
a confirm action option appears on the phones screen
use Volume up to say YES / or Volume Down to say NO
Warning oem unlock will WIPE/Factory reset your phone
once it finishes the phone will be stuck on the
Recovery/fastboot/restart screen just long press the power key
until the phone shuts down
start the phone again using Power + Volume up when the black
screen with the 3 options come up, let go and use Volume up to
select Fastboot mode and confirm using Volume Down
Once in fastboot connect your phone to PC and use ADB commands
command- fastboot devices
serial apears
Here you will flash the magisk patched_boot.img
the same image you used to root your phone
command- fastboot flash boot boot.img
it will say finished-ok (or similar)
command- fastboot reboot
the boot up time will be longer than normal
but the phone should now complete the boot
and present the inicial setup screen, select language
enter your mail, the usual bla bla...
any way at this point just repeat step 7
to get root running again
sp flash tools v5.1716.
phonedriller said:
1-step
in order to root these qilive devices you will need...
magisk manager apk v5.6.4
stock boot.img file
working ADB to unlock oem and flash
2-step....
Click to expand...
Click to collapse
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
xdacktheresianum said:
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
Click to expand...
Click to collapse
Awsome work congrats, as for the recovery so far no luck so try not to go 2 crazy until a working recovery is up and working , install stericsons busy box this is always the first root app i install
If possible buy sterics busybox pro and titaniumbackup pro if you want to install apps to sd card apps2sd pro all of these can be tested in free
Version,again nice work congrats enjoy you rooted phone :highfive:
xdacktheresianum said:
Hi phonedriller,
phew, I did it! (Q8S55IN4G2), thanks.
Next step: Have you found a compatible custom recovery? (especially for nandroid backups and for xposed installation)
Would be very thankful for your help!
thanks
xdatheresianum
Click to expand...
Click to collapse
give a hungry man fish and you solve his problem for a day or two
teach him how to fish and you solve his problem for life
phonedriller said:
give a hungry man fish and you solve his problem for a day or two
teach him how to fish and you solve his problem for life
Click to expand...
Click to collapse
hi phonedriller,
...well, i must have been an unlucky fisherman
an app i installed ended up giving me a soft brick (bootloop between qilive icon opening screen - btw still with the "warning" of "device is unsafe etc", i.e. oem still open - and black screen, qilive opening screen etcetcetc)
have cleaned cache; went for factory reset; etc
BUT: am presently stuck when trying to go via ADB (which used to work perfectly before) that somehow the usb drivers don't want to get installed properly. as a consequence, desktop cannot see devices.
and i cannot, for the sake of me, remember how i had succeeded before installing usb drivers.
could you please help?
thx
cktheresianum
xdacktheresianum said:
hi phonedriller,
...well, i must have been an unlucky fisherman
an app i installed ended up giving me a soft brick (bootloop between qilive icon opening screen - btw still with the "warning" of "device is unsafe etc", i.e. oem still open - and black screen, qilive opening screen etcetcetc)
have cleaned cache; went for factory reset; etc
BUT: am presently stuck when trying to go via ADB (which used to work perfectly before) that somehow the usb drivers don't want to get installed properly. as a consequence, desktop cannot see devices.
and i cannot, for the sake of me, remember how i had succeeded before installing usb drivers.
could you please help?
thx
cktheresianum
Click to expand...
Click to collapse
PS: adb will not work if the phone is not booting to the OS
it will work if you manualy place the phone in fastboot AKA bootloader
MODE ,you see if it does not boot to OS then usb service is not working
use power + Volume up to enter the black menu
use the Volume up to select fastboot(bootloader) volume - to confirm
connect the phone to your PC
flash the boot.img, the same boot.img used to root (patched by magisk)
to see is adb is ok just run - fastboot devices
if a serial is presented then all other stuff should work
step 1 - reflash the boot img
step 2 - after the flash finishes - fastboot oem lock
message on the phone screen, confirm yes to lock
OEM
step 3- press power until it turns off
it should now complete the start up (boot)
if not working this method let me now
you can still flash the full factory firmware
using SP Flash Tool v5.17xx
phonedriller said:
PS: adb will not work if the phone is not booting to the OS
it will work if you manualy place the phone in fastboot AKA bootloader
MODE ,you see if it does not boot to OS then usb service is not working
use power + Volume up to enter the black menu
use the Volume up to select fastboot(bootloader) volume - to confirm
connect the phone to your PC
flash the boot.img, the same boot.img used to root (patched by magisk)
to see is adb is ok just run - fastboot devices
if a serial is presented then all other stuff should work
step 1 - reflash the boot img
step 2 - after the flash finishes - fastboot oem lock
message on the phone screen, confirm yes to lock
OEM
step 3- press power until it turns off
it should now complete the start up (boot)
if not working this method let me now
you can still flash the full factory firmware
using SP Flash Tool v5.17xx
Click to expand...
Click to collapse
dearphonedriller,
thank you so much for your speedy help.
followed the steps given by you. all is well, as you predicted, until step 3.
however:
phone (now without the "orange state" message, i.e. oem locked) still bootloops and short of ADB "fastboot devices" the desktop doesn't see the phone (and driver installation continues to fail), as per your PS (thanks!) i guess flashing the full factory firmware ("RC-mt6737...zip" quoted by you in your very first post) is next.
would you please point me to a basic-for-noobs tutorial or instruct me on the step-by-step commands/procedures using this zip file?!
HUGE thanks
ckth
xdacktheresianum said:
dearphonedriller,
thank you so much for your speedy help.
followed the steps given by you. all is well, as you predicted, until step 3.
however:
phone (now without the "orange state" message, i.e. oem locked) still bootloops and short of ADB "fastboot devices" the desktop doesn't see the phone (and driver installation continues to fail), as per your PS (thanks!) i guess flashing the full factory firmware ("RC-mt6737...zip" quoted by you in your very first post) is next.
would you please point me to a basic-for-noobs tutorial or instruct me on the step-by-step commands/procedures using this zip file?!
HUGE thanks
ckth
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=-zaEmj3-prU
turn the phone off, follow the video
flashing the full firmware is actualy easy
https://forum.hovatek.com/thread-13970.html
or searh sp flash tool here on xda
https://www.youtube.com/watch?v=LzyYXAflmOk&t=125s
phonedriller said:
https://www.youtube.com/watch?v=-zaEmj3-prU
turn the phone off, follow the video
flashing the full firmware is actualy easy
https://forum.hovatek.com/thread-13970.html
or searh sp flash tool here on xda
https://www.youtube.com/watch?v=LzyYXAflmOk&t=125s
Click to expand...
Click to collapse
thank you, phonedriller
everything worked perfectly via SPFlash Tool.
and, referring back to our above questions re the possibility of getting TWRP onto the phones, a developer friend of mine writes me this:
>try to flash TWRP:
>Download following files from this link:
>https://mega.nz/#F!qZIgnJRK!5apBfYo1je0ytg-wmA6JMQ
>- Odin3 v3.12.3 (Complete folder)
>- twrp-3.2.1-0-Q8S55IN4G2-20180318.tar
>1. Start your Phone into download mode
>2. Start Odin (Odin3 v3.12.3\Odin3.exe)
>3. Click on Options and unmark Auto Reboot
>4. Click AP and select twrp-3.2.1-0-Q8S55IN4G2-20180318.tar
>5. Press Start and wait until finished (Reset or OK!)
>6. Restart your phone immediatly to recovery mode
>7. In TWRP Recovery click on mount
>8. Set the checkbox checked at system (that system is mounted)
>9. go back and click on advanced
>10. Open file manager
>11. navigate to system/build.prop and click on build.prop
>12. Click on chmod
>13. type: 0644 and hit the accept button on screen or at the virtual
>keyboard on your phone
>14. restart your phone
i haven't tried this, but am wondering whether it might seem "reasonably possible" when reading through it.
thanks
ckth
Do you perhaps have link to Q8S5IN4GP stock rorm? Mine came with malware installed on it. I want to see if those were chinese who preinstalled or or was it decided by Auchan.
tommo1982 said:
Do you perhaps have link to Q8S5IN4GP stock rorm? Mine came with malware installed on it. I want to see if those were chinese who preinstalled or or was it decided by Auchan.
Click to expand...
Click to collapse
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
phonedriller said:
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
Click to expand...
Click to collapse
I had issues with adds being displayed at home screen and I was not able to close them. I had to use NetGuard to find that FOTA talks to 'adsup' and it is a known malware provider. I learned that some of the system apps try to talk with Alibaba servers and AdOppo (whatever it's called). Kaspersky might not be wrong, actually.
I'm trying to download stock firmware, but I don't know the file name. The website with it is locked, so unless I know exactly what I need, I cannot download it.
phonedriller said:
On my phone it came from factory and on the firmware file on 2 models , however only kasperky complains about malware on an system app called Helper bla bla bla i think its a false positive(i think) as no other antivirus or playstore ever found anything,but hey better investigate and be safe then sry right :good: maybe a ported cyanogen rom, ive look at a few rom port tutorials but my knowhow is limited + dont even have a working twrp yet, avg/avast/malwarebytes and a few others ,only kaspersky detects malware.
Click to expand...
Click to collapse
Yes i noticed the site now asks for a login that i dont have,but it was open to all until recently i have the firmware file in my pc,a few days ago i went to check for firware updates and the site was diferent and closed , in the site the download link was 882912/****** this firmware services at least 3 similar models
phonedriller said:
Yes i noticed the site now asks for a login that i dont have,but it was open to all until recently i have the firmware file in my pc,a few days ago i went to check for firware updates and the site was diferent and closed , in the site the download link was 882912/****** this firmware services at least 3 similar models
Click to expand...
Click to collapse
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
phonedriller said:
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
Click to expand...
Click to collapse
Ps use root + apps2sd or titaniumbackup to stop/disable the bad apps and replace them with playS app,not possible on all apps of course
phonedriller said:
I guess the best thing would be a lineage or cyanogen ported rom(clean),ps i flashed the phone 2 times because of popups/adds and battery drain,however im aware that having root and installing tones of crasy stuff can fu.. Up any phone cheap or flagship,thus the firmware flashes,i discovered that having malwarebytes(premium)free for 30days keeps the phone clean and working fine,it seems that one is forced to buy from a main stream brand or risk this kind of thing,little to no support,no updates at all,bad security,the problem is certain apps if removed resoult in boot loop like this Helper app
Click to expand...
Click to collapse
I'm thinking about Android 8.1 with it's Treble project. I might not be knowledgable enought to compile and flash it, though.
tommo1982 said:
I'm thinking about Android 8.1 with it's Treble project. I might not be knowledgable enought to compile and flash it, though.
Click to expand...
Click to collapse
Flashing is super easy use spflashtools or. Odin compiling a Rom is not , were you able to get the original firmware? You will need the original firware to get the boot and partition info from what i read so far
Unfortunately not. I will ask at the shop where I bought it how to contact tech. It should be freely available. I don't understand why Qilive restricted access to firmware.
I'll post when I learn anything.
Well, you can download the firmware if you know the file name. The bad news is, it seems the stock firmware has malware preinstalled. If there is anyone who could help confirm it. I have the ROM, and I can upload it to Google Drive if needed.
Hi all,
I'm coming back to a question lingering since the very first post here and mentioned again in post #9:
Is there a successful way to install TWRP on this Qilive model?
Re this topic:
- has anybody tried/has anybody been successful with the procedure described in post #9?
and
- has anybody seen the following TWRP builders' version (do an in-page search on Q8S55IN4G2)
https://twrpbuilder.github.io/fr/downloads/twrp/
with the download belonging to it
https://androidfilehost.com/?fid=890129502657591798
???
any successful installations to report???
Wouldn't THAT be great!!??
thanks
xdack
My phone stuck on bootloader after flashing wrong file and then i download stock firmware but when i click on flashall_AFT is open for second and closed automatically.using cmd it shows target reported max download size and cannot open important also.
PLEASE HELP ME
asingh38b said:
My phone stuck on bootloader after flashing wrong file and then i download stock firmware but when i click on flashall_AFT is open for second and closed automatically.using cmd it shows target reported max download size and cannot open important also.
PLEASE HELP ME
Click to expand...
Click to collapse
Change usb port, properly installe adb,fastboot,device driver then try
asingh38b said:
My phone stuck on bootloader after flashing wrong file and then i download stock firmware but when i click on flashall_AFT is open for second and closed automatically.using cmd it shows target reported max download size and cannot open important also.
PLEASE HELP ME
Click to expand...
Click to collapse
Sir ..Now it is working .I just move the stock firmware file in C drive.
asingh38b said:
Sir ..Now it is working .I just move the stock firmware file in C drive.
Click to expand...
Click to collapse
Can u plz provide the tutorial...?
I want to downgrade from pie to oreo
Device: max m2
Ram : 3gb
Rahul Kurmi said:
Can u plz provide the tutorial...?
I want to downgrade from pie to oreo
Device: max m2
Ram : 3gb
Click to expand...
Click to collapse
You can download your stock firmware from firmwarex.net.
Backup your important files initially.Because all system will wife after flash.
Firstly install adb drivers in your pc.when it completely install then go to settings (asus device)->system->about phone ->build number.Tab it 4 to 6 times.Now u have developer option on your settings , then active your developer option.
-> also on debugging mode.
And reboot your phone into fastboot mode.
Now go to your pc.
-> Go to your main drive(C
->there is new folder adb named.
->click on it,and tap on shift key and click on right click of your mouse(combination keys).
U will see there is 'open with cmd ',click on it.
->Now, There is some cmd commands.
-> fastboot devices
U will see there is some serial number,its means your device now successfully attached with ur system.
-> Now extract your stock firmware.
--> copy your extract firmware into main drive(C.
->Open it ,there is flashAll_Aft option,click on it.
Now u will see that automatically work.
It will takes some time.
And don't remove your cable during flashling.
Your device automatically reboot into system after flashed all files.
Now setup your devices.
If your bootloader is unlock it wil relock.
And if your device is rooted it will unrooted.
U also gets fota or ota uodates.
After setup, u device show new update.
Update your mobile, Not to pie.
Update contains feb security patch.
But another update contain pie update.
asingh38b said:
You can download your stock firmware from firmwarex.net.
Backup your important files initially.Because all system will wife after flash.
Firstly install adb drivers in your pc.when it completely install then go to settings (asus device)->system->about phone ->build number.Tab it 4 to 6 times.Now u have developer option on your settings , then active your developer option.
-> also on debugging mode.
And reboot your phone into fastboot mode.
Now go to your pc.
-> Go to your main drive(C
->there is new folder adb named.
->click on it,and tap on shift key and click on right click of your mouse(combination keys).
U will see there is 'open with cmd ',click on it.
->Now, There is some cmd commands.
-> fastboot devices
U will see there is some serial number,its means your device now successfully attached with ur system.
-> Now extract your stock firmware.
--> copy your extract firmware into main drive(C.
->Open it ,there is flashAll_Aft option,click on it.
Now u will see that automatically work.
It will takes some time.
And don't remove your cable during flashling.
Your device automatically reboot into system after flashed all files.
Now setup your devices.
If your bootloader is unlock it wil relock.
And if your device is rooted it will unrooted.
U also gets fota or ota uodates.
After setup, u device show new update.
Update your mobile, Not to pie.
Update contains feb security patch.
But another update contain pie update.
Click to expand...
Click to collapse
I extract it in desktop and it still open only for barely 1 sec although my device is connected already
i want to go stock android 8.1.0 to 9.0
asingh38b said:
My phone stuck on bootloader after flashing wrong file and then i download stock firmware but when i click on flashall_AFT is open for second and closed automatically.using cmd it shows target reported max download size and cannot open important also.
PLEASE HELP ME
Click to expand...
Click to collapse
I flash my asus zenfone max m2 [ZB633KL_WW_15.2016.1810.126_QFIL(FOR_IDIN) ] . Now i have 8.1.0 But i want to go android 9.0 .[my phone snapdragon 632 processor ]
i also download android 9.0 via asus website ...and pest internal store root path . Then we get update notification ... but update runing time show is error . please help me