[RECOVERY][UNOFFICIAL] TWRP for Galaxy A50 A50DD - Samsung Galaxy A50 ROMs, Kernels, Recoveries, & Ot

Team Win Recovery Project 3.3.1-0​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" and unlock BL in download mode (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. All apps that use KNOX like Samsung pay, Secure Folder and maybe more will no more work
Download: A50 (Exynos Only!)
DOWNLOAD TWRP FOR A50 ASH2 Firmware base
Sources:
Tree and kernel sources
Installation Guide:
On 2th Post
Bugs:
- No one
XDA:DevDB Information
[RECOVERY][UNOFFICIAL] TWRP for Galaxy A50 A50DD, Kernel for the Samsung Galaxy A50
Contributors
geiti94
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2019-03-29
Current Beta Version: 1.0
Beta Release Date: 2019-03-29
Created 2019-03-28
Last Updated 2019-09-21

Installation Guide
Installation Guide:
Go to Developer settings and enable oem unlock
power off the device and boot in download mode with vol up + vol down buttons and plug in the usb (make sure usb cable is connected to the pc)
in download mode you see the long press vol up option for unlock bl
unlock the bootloader (that will wipe your device so be sure you made a backup of your data)
after bootloader unlock boot up the phone and make sure it is connected to the internet or he triggers rmm prenormal
setup the phone without google account etc
reboot in download mode and flash the magisk prepatched tar for your device with odin in the AP field (if you want to patch twrp byself download unpatched tar and select it in magisk manager. patched tar is in downloads folder after patch)
hold vol up + power button while odin is flashing until you are in twrp.
format data in twrp
flash the multidisabler zip by ian in twrp
press reboot to recovery in twrp for boot rooted with magisk.
NOTE: for boot rooted press vol up+power until you see a50 logo and release it or in twrp select reboot recovery.
Changelog:
15.12.2019
-Rebased to ASK9/ASL1 Kernel source
04.11.2019
- Rebased Kernel Source to ASJ1 one
- Added Random Reboot fix by ahronshor
- Magisk patched Builds use now Magisk 20.1. so if your rom dont boots anymore = broken rootfs and its not a problem of the recovery but from the rom and rom dev needs to fix it
22.09.2019
-Reverted MTP Changes from last build since for some mtp dont worked in system
21.09.2019
- Fixed the bug that mtp dont worked any more on TWRP when usb cable got disconnected and reconnected
- Modded Kernel for have MTP in TWRP, Samsung Roms and GSI roms (for GSI Roms flash GSI_MTP_ENABLER.zip)
- Reverted FFS MTP changes since new way is more stable
14.09.2019
- Fixed MTP using FFS_MTP in recovery (Thx to @bigbiff for add FFS MTP support on TWRP 3.3.0. FFS_MTP dont corrupts large files like the mtp used by samsung in the roms)
- Removed File Based backups because the phone refuses to boot from filebased backups since they breaks the rootfs
- Fixed completly bootloop issue
- Fixed the data error (was my fault because data was set to f2fs)
13.09.19
-Release a V2 of todays build with a bug fix (recovery dtbo was not included in image because i forgot a string in the boardconfig)
13.09.19
-Reworked Device tree completly
-Kernel Source Reworked completly too and Rebased to ASH2 kernel source
-Fixed the bug with twrp dont boots when phone is encrypted
-System as root implemented right in twrp (note all old zips will not work anymore and the devs needs to update it. Look on s10 threads how the updater script is made)
-Magisk can get updated normaly with magisk manager (make sure you are on a custom rom or a stock rom with rootfs that is intact and not broken or you get a bootloop)
If magisk 19.4 cant boot then its not a problem of twrp but from the rom dev that breaked rootfs support on the system or vendor partition
29.03.2019
-Initial Release

Great work gaet :good:

Amazing work my friend thanks a ton

there you go
thumbs up for appreciate the hard work

so new version with fixed mtp is uploaded and now twrp is bugfree

Guide
Can you please give the full guide on how to install twrp and root?
Thankyou.

geiti94 said:
<mod edit>
Click to expand...
Click to collapse
Have you tested it yourself ??

fail !!!!!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 64 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> vbmeta.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

musa.mun said:
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 64 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> vbmeta.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you dont unlocked bootloader

GalacticRogue said:
geiti94 said:
Team Win Recovery Project 3.2.3-0​
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" and unlock BL (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. All apps that use KNOX like Samsung pay, Secure Folder and maybe more will no more work
Download: A50 (SM-A505F)
DOWNLOAD TWRP FOR A50
Sources:
TWRP Tree
Kernel Source
Bugs:
-none
XDA:DevDB Information
[RECOVERY][UNOFFICIAL] TWRP for Galaxy A50, Kernel for the Samsung Galaxy A50
Contributors
geiti94
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.1
Stable Release Date: 2019-03-29
Current Beta Version: 1.0
Beta Release Date: 2019-03-29
Created 2019-03-29
Last Updated 2019-03-28[/QU
Have you tested it yourself ??
Click to expand...
Click to collapse
yes since i have an a50 too
Click to expand...
Click to collapse

fail
i got error custom binary blocked
oem unlocked

@geiti94
In OP it is written 3.2.3, and in the screenshot - 3.0.0? Is this screenshot from your device?

ananjaser1211 said:
Great work gaet :good:
Click to expand...
Click to collapse
Did you buy the a50 ???

Great work

What about TWRP flashable OTA builds? Many devices have dedicated threads for that. Wonder if someone might pick that up maybe.

hamid.aa17 said:
fail
i got error custom binary blocked
oem unlocked
Click to expand...
Click to collapse
read the first post.... enable oem unlock and unlock bootloader in download mode....

Great work man.. ?

Will it be possible to sideload the official incremental update zip files after flashing this recovery?

hamid.aa17 said:
fail
i got error custom binary blocked
oem unlocked
Click to expand...
Click to collapse
Can u please tell how did u unlock bootloader??

Related

[RECOVERY][TWRP 3.0.2-0]TWRP Recovery for Samsung Galaxy J5 (2015)

[RECOVERY][TWRP 3.0.2-0]TWRP Recovery for Samsung Galaxy J5 (2015)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP Recovery for Samsung Galaxy J5.
DISCLAIMER
Code:
Your warranty is now void.
I'm not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired, because the alarm app failed. Please
do some research if you have any concerns about features included
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
------------------------------------------------------------------------------------------------------------------------------------------
Installation
1. Download TWRP from Downloads below, install device USB drivers and Odin 3.10.7.
2. Power off the device.
3. Boot to download mode (VOLUME DOWN/HOME/POWER).
4. Volume UP once.
5. Open Odin 3.10.7 as an administrator, connect the device to a usb port,
and make sure a blue button appears and says "Added" in description on the left.
6. Select AP or PDA for older Odin and search for the downloaded tar file.
7. Uncheck auto reboot from the second tab.
8. Start flash and you should see the succeeded command.
9. Unplug the device and long press POWER until it powers off or remove the battery.
10. Reboot to TWRP and enjoy! (VOLUME UP/HOME/POWER).
------------------------------------------------------------------------------------------------------------------------------------------
Downloads
SM-J500FN
SM-J500F
SM-J500G
SM-J500M
SM-J500H
SM-J500Y
SM-J5008
SM-J5007
------------------------------------------------------------------------------------------------------------------------------------------
Flashing and Debugging Tools [WINDOWS]
ODIN v3.10.7
ADB Driver for Windows
------------------------------------------------------------------------------------------------------------------------------------------
If your device is not listed, then it is not supported yet.
DON'T flash anything until we make progress for your variant.
If you flash the stock MM secure bootloaders (aboot.mbn, sbl1.mbn) from official update, or ODIN,
obviously this recovery won't work anymore. Consider using a custom 5.1.1 ROM instead
Consider clicking the "Thanks" button if you find this open-source development useful! Thank you.
------------------------------------------------------------------------------------------------------------------------------------------
​
XDA:DevDB Information
TWRP 3.0.2-0, Tool/Utility for the Samsung Galaxy J5
Contributors
Nick Verse
Source Code: https://github.com/Galaxy-J5
Version Information
Status: Stable
Current Stable Version: 5.0.0
Stable Release Date: 2016-10-05
Created 2016-09-25
Last Updated 2016-10-05
Installed J500M version but apparently it's not updated
Starting TWRP 3.0.2-0-c08b236b on Sat Jan 17 20:20:49 2015
(pid 208)
...
ro.twrp.version=3.0.2-0
ro.wifi.channels=
ro.allow.mock.location=1
ro.board.platform=msm8916
ro.build.id=LMY49J
ro.build.date=Κυρ 25 Σεπ 2016 02:52:39 πμ EEST
ro.build.date.utc=1474761159​
djumie said:
Installed J500M version but apparently it's not updated
Starting TWRP 3.0.2-0-c08b236b on Sat Jan 17 20:20:49 2015
(pid 208)
...
ro.twrp.version=3.0.2-0
ro.wifi.channels=
ro.allow.mock.location=1
ro.board.platform=msm8916
ro.build.id=LMY49J
ro.build.date=Κυρ 25 Σεπ 2016 02:52:39 πμ EEST
ro.build.date.utc=1474761159​
Click to expand...
Click to collapse
Yes it is. Check the date. Κυρ 25 Σεπ 2016 02:52:39 πμ EEST is equal to Sunday 25 September 2016.
Nick Verse said:
Yes it is. Check the date. Κυρ 25 Σεπ 2016 02:52:39 πμ EEST is equal to Sunday 25 September 2016.
Click to expand...
Click to collapse
Oh! I didn't get that. Thank you!
Updated [Downloads Tab]
Now TWRP downloads are straight from XDA thread.
Info about next update
Hello everyone! I have added the following options for you in the next recovery update.
Backup Options:
- Backup EFS partition. (IMEI and firmware related)
- Backup Persist partition. (Bluetooth and firmware related)
- Backup Modem partition.
- Backup Firmware partition.
Wiping Options:
- Wipe Hidden partition. (Samsung bloatware)
I'm testing these right after building them. Any other opinion is welcome!
Nick Verse said:
Hello everyone! I have added the following options for you in the next recovery update.
Backup Options:
- Backup EFS partition. (IMEI and firmware related)
- Backup Persist partition. (Bluetooth and firmware related)
- Backup Modem partition.
- Backup Firmware partition.
Wiping Options:
- Wipe Hidden partition. (Samsung bloatware)
- Wipe Persistent partition. (FRP Locking feature, OEM-unlocking options from stock ROMs)
I'm testing these right after building them. Any other opinion is welcome!
Click to expand...
Click to collapse
Does it increase the data/internal partition or root partition if you wipe the hidden and persistent partitions?
serdotlinecho said:
Does it increase the data/internal partition or root partition if you wipe the hidden and persistent partitions?
Click to expand...
Click to collapse
Modifying partitions is possible through "parted". Wiping Hidden could bypass the samsung bloatware loading in first boot on Stock ROMs, and formatting Persistent could fix the FRP locks. But I see now that formatting EMMC partition is not possible! (Stupid mistake of mine) I will keep the Hidden wiping option only because it is ext4. Persistent partition is bypassed in CM-12.1 from source anyway.
TWRP Updated
TWRP has been updated to newest version with the following added features:
Wiping options:
- Support to wipe Hidden partition in recovery. (Samsung's bloatware loading)
Backup options:
- Support to backup existing recovery.
- Support to backup Modem.
- Support to backup Firmware.
- Support to backup EFS.
Miscellaneous:
- Battery management improvements.
- UI scrolling/display improvements.
- Kernel stability fixes.
- Change external SD mounting name to "sdcard1", just like in CyanogenMod.
Also moved download links to Android File Host for stability reasons.
Hit the thanks button if you find this open-source development useful!
can't download the recovery for j500h...please check the link...thanks!..
t0lits said:
can't download the recovery for j500h...please check the link...thanks!..
Click to expand...
Click to collapse
I just dowload it, it is working, please try again.
recovery
ltmpx said:
I just dowload it, it is working, please try again.
Click to expand...
Click to collapse
ok i'll try it again sir...thanks!..
t0lits said:
ok i'll try it again sir...thanks!..
Click to expand...
Click to collapse
If you can not download it, i will share it on Google drive so you can download it from there.
ltmpx said:
If you can not download it, i will share it on Google drive so you can download it from there.
Click to expand...
Click to collapse
No external links allowed please.
ltmpx said:
If you can not download it, i will share it on Google drive so you can download it from there.
Click to expand...
Click to collapse
no external link is allowed here...send it as a message to me sir...thanks...
Nick Verse said:
No external links allowed please.
Click to expand...
Click to collapse
No,I will not post external links! Thank you sir!
Hey can i install this then flash latest beta su 2.72 to get root?
Can't download because chrome / internet explorer / mozilla firefox and windows detects virusses.
stefanschoemaker said:
Can't download because chrome / internet explorer / mozilla firefox and windows detects virusses.
Click to expand...
Click to collapse
Disable for the moment your anti-virus programs, and download it, you can trust 100% that iis not infected
Nice job Nick ....works correctly for me...Ty

[9][OFFICIAL][RELEASE][r71] CarbonROM | cr-7.0 [i9100]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CarbonROM is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look, build, and use our code at CarbonROM's GitHub...
Disclaimer:
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! These builds are experimental and can contain Bugs (as listed above). Make sure to do backups.
Support:
We spend an astonishing amount of time developing this software. We can't spend much time on XDA as a result, so if you need support, please try the following:
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our website. Carbon FAQ
3) Ask a question in your device forum. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
4) Join our Discord server! There, you can connect with other Carbon users and our developers, and you can get quicker responses to your bug reports. The invite link is right below.
5) Please keep bugreports to this thread or Discord. Do NOT create a Jira ticket. This is still in early development so we don't accept any bugreports yet.
Requirements:
You need 1.5 GB of system partition and emulated storage for ROM installation.
Not sure how? See on this post.
Download
Join the CarbonROM Discord server
GitHub
Kernel source
Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
XDA:DevDB Information
CarbonROM, ROM for the Samsung Galaxy S2
Contributors
linusdan, rINanDO, Myself5, CarbonROM
Source Code: https://github.com/CarbonROM
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
Based On: AOSP
Version Information
Status: Stable
Created 2019-06-09
Last Updated 2021-08-30
FAQ
0) Known issues:
- Call recording only records microphone
- Device encryption [I have no idea how to fix it, sorry]
1) Yes, it is rootless.
Do not ask me when it will have implementation for compatibility with the old SuperSU application. Do not insist.
2) Magisk:
Adaptation possible! But to be successful I have to synchronize the cr-7.0 code on the PC and 150GB of space is needed, which I don't have at the moment.
As soon as I can, I'll do it.
DON'T ASK ME WHEN, PLEASE.
The i9100 Kernel (3.0.101) does not support namespace to work. Please, do not pollute the topic with that kind of question.
3) Bugs:
Did you find a bug or problem?
Make a logcat and put it in pastebin/hastebin. I'll look when I can
You will need a computer, adb installed, usb debugging enabled on the smartphone and a usb cable.
Here's how to do it here.
1. Open Command Prompt (Windows) or Terminal (Linux/macOS).
2. Type:
Code:
adb logcat -d > carbon-logcat-dateoflogcat.txt
This will save the log to carbon-logcat-dateoflogcat.txt.
4) MindTheGapps or NanoDroid MicroG?
Does not matter! But... the NanoDroid is lighter. Recommend!
5) I love MicroG, but I also like the Play Store
No problems! After MicroG installation, you can use this Shadow53 installer for store use.
P.S: This should be done after you have restarted the device with NanoDroid installed.
6) Why use the dark mode to prevent wear on the AMOLED screen?
8 years baby! You will not want to put a generic on your cell phone, right?
Upgrade from Samsung stock ROM to latest build using ODIN 3.13.1
Also recommended for devices with Android 4.4 - 5+
OBS1: Read before you get started!
OBS2: If you previously used LineageOS 16.0 build #15, skip to step 4.
OBS3: Back up your files and make a full wipe before the procedure.
Files Required:
Stock ROM
Pit file by-the.gangster
Samsung USB Driver
Odin 3.13.1
Latest CarbonROM
Pit file with Emulated Storage by rINanDO
TWRP Emulated Storage 3.3.1-1 by rINanDO
0) Install Stock ROM
0.1 After downloading the tools, install the Samsung USB Driver and unzip the file of the rom.
The original rom file is tar.md5
0.2a Boot your phone into Download-mode (Volume down + Power/Standby + Home and hold for 10 seconds).
0.2b Start Odin 3.13.1 in your PC.
0.2c Connect your phone via USB to your PC.
0.2d Press volume up on your phone, Odin should detect your phone.
0.3 In the pit tab on the left side, select the file "i9100_1.5gb-system_6gb-data_512mb-preload_by-the.gangster.pit"
0.4 In AP button, select the tar.md5 file. The Odin app will frozen for a few minutes but do not worry.
After this, select start button. Wait terminate, do not pull the cable
0.5 The device will restart. A message will appear stating that it is encrypted. Turn off your device and enter recovery mode (Volume up + Power/Standby + Home and hold for 10 seconds). Clear Cache and Dalvik / Cache. Restart.
0.6 A warning will appear in the status bar saying that the partition is corrupted. Format the partition. Verify that the partition succeeded in the device settings.
0.7 Charge the phone and follow the next instructions.
1) Prepare your phone
1.1 Copy the ROM to the Micro-SDCard before flashing.
1.2 Boot your phone into Download-mode (Volume down + Power/Standby + Home and hold for 10 seconds).
1.3 Start Odin 3.13.1 in your PC.
1.4 Connect your phone via USB to your PC.
1.5 Press volume up on your phone, Odin should detect your phone.
2) Odin
Auto Reboot : unchecked
Re-Partition: checked
PIT : i9100-LOS-16.0-Emulated-Storage.pit
AP : i9100-LOS-16.0-Emulated-Storage-TWRP-3.3.1-1.tar.md5
Press Start.
3) After successful flash
Reboot phone into Recovery
Press Volume up + Power/Standby + Home and hold for 10 seconds.
The phone shuts down.
Repeat Press Volume up + Power/Standby + Home and hold for 10 seconds
Phone boots in recovery TWRP 3.3.1-1. Swipe to allow modifications.
4) TWRP
In TWRP 3.3.1-1 you need to format partitions
- Wipe -> Format Data -> Type [yes]
- Wipe -> Advanced Wipe -> Select:
Dalvik / ART Cache
Cache
System
Non-emulated Storage
-> Swipe to Wipe
5) Install CarbonROM and boot system.
P.S: To prevent "Uncryption unsuccessful" error of GAPPS at first start:
- Reboot to recovery and Wipe -> Format Data -> Type [yes] again
Mercy.
Changelog - Here you will be updated if you have relevant information
OBS:
1) Don't use 20190911 build due to partition issues.
2) Automatic date/time of build 20200920 does not work and crashes after 2/3 days.
Use the latest build to make sure it works.
30082021 (Official build)
Updated sources
Android 9.0.0_r71
August 2021 Security patch
10072021 (Official build)
Updated sources
Android 9.0.0_r69
June 2021 Security patch
20092020 (Official build)
Updated sources
Android 9.0.0_r59
August 2020 Security patch
02032020 (Official build)
Updated sources
February 2020 Security patch
20122019 (Official build)
Updated sources
December Security patch
Added support for exFAT + NTFS (Thanks to @TALUAtXDA)
02102019 (Official build)
Disabled Multicast DNS
Performance: Disabled Kernel Samepage Merging
Resize userdata partition to leave room for the crypto footer region
Updates by rINanDO:
Fix unlocking SIM PIN
Fixed color issues in screen recording
14082019 (Official build)
August security patch
SamsungDoze: Fix menu display
31072019 (Official build)
After four months of testing, the official compilation was released. Enjoy!
15072019
July security patch
Fixed turn on the screen via home button
Updates by rINanDO:
Set swappiness to 100
Using Preload-partition for misc
Added Bluetooth SIM Access Profile support (Not tested)
Fixed stereo microphone recording (also in videorecording)
Fix autofocus in preview
Set ro.config.small_battery to true. This will trigger device-idle in 15
minutes instead of 30 minutes
09062019
Initial release
https://get.carbonrom.org/device-i9100.html
Is the official version your job?
ze7zez said:
https://get.carbonrom.org/device-i9100.html
Is the official version your job?
Click to expand...
Click to collapse
Yes! Now it's official
linusdan said:
After four months of testing, the official compilation was released. Enjoy!
Click to expand...
Click to collapse
Hi linusdan ! I don't guess , Does your Carbon ROM (latest release) have root in it ?
or should be do separately ? where is the complete guide to root with Carbon ROM ?
Thanks for your Job
Czeh said:
Hi linusdan ! I don't guess , Does your Carbon ROM (latest release) have root in it ?
or should be do separately ? where is the complete guide to root with Carbon ROM ?
Thanks for your Job
Click to expand...
Click to collapse
It is without root, as said in the second post. LineageSU does not work.
On stock ROM i9100 (there was never anything else) I made an instruction with post #3 but nothing happens.
My system is Windows 10 PRO.
Edit.
===
Instead:
0.2 Start Odin and connect your phone to the PC. The device ID will appear in the application interface.
It should be:
0.2a Boot your phone into Download-mode (Volume down + Power/Standby + Home and hold for 10 seconds).
0.2b Start Odin 3.13.1 in your PC.
0.2c Connect your phone via USB to your PC.
0.2d Press volume up on your phone, Odin should detect your phone.
ze7zez said:
Instead:
0.2 Start Odin and connect your phone to the PC. The device ID will appear in the application interface.
It should be:
0.2a Boot your phone into Download-mode (Volume down + Power/Standby + Home and hold for 10 seconds).
0.2b Start Odin 3.13.1 in your PC.
0.2c Connect your phone via USB to your PC.
0.2d Press volume up on your phone, Odin should detect your phone.
Click to expand...
Click to collapse
Fixed! Thanks :highfive:
giving this a try @linusdan, switching from your pixel experience
---------- Post added at 07:54 PM ---------- Previous post was at 07:04 PM ----------
installed with NanoDroid Micro G. Much fast than PE
found settings is crashing on clicking ambient display..no show stopped though, will post logs in a while
chhapil said:
found settings is crashing on clicking ambient display..no show stopped though, will post logs in a while
Click to expand...
Click to collapse
This is not a crash, just an incorrect redirection.
Enter "ambient" in the settings browser and open.
It works.
used with both gapps and microG.
MicroG is really recommended... with GApps the phone just crawls while microG is fast enough for daily driver!
chhapil said:
Found settings is crashing on clicking ambient display..no show stopped though, will post logs in a while
Click to expand...
Click to collapse
ze7zez said:
This is not a crash, just an incorrect redirection.
Enter "ambient" in the settings browser and open.
It works.
Click to expand...
Click to collapse
SamsungDoze factoring was wrong. The patch will be inserted in the next build via OTA.
linusdan said:
SamsungDoze factoring was wrong. The patch will be inserted in the next build via OTA.
Click to expand...
Click to collapse
What is your build cycle for carbon rom currently?
chhapil said:
What is your build cycle for carbon rom currently?
Click to expand...
Click to collapse
Wednesdays at 2AM GMT
Sync failed and there was no compilation of the week. I am checking what the problem is.
linusdan said:
Wednesdays at 2AM GMT
Sync failed and there was no compilation of the week. I am checking what the problem is.
Click to expand...
Click to collapse
Thanks, we've got a new Carbon. :good:
OTA update has gone through without problems.
Supersu
What happens when you flash supersu flashable with TWRP? Would it not boot?
roynatech said:
What happens when you flash supersu flashable with TWRP? Would it not boot?
Click to expand...
Click to collapse
Bootloop. The reason is described in the thread.

[RECOVERY][UNOFFICIAL] TWRP for Galaxy Note 20/Note 20 Ultra

Team Win Recovery Project 3.4.0​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Exynos ONLY.
In NO way it is compatible with Snapdragon variants including but not limited to American(U/A/T/P/V), Chinese(0/8/6), Hong Kong(0), Japanese(SC-*), Canadian(W) variants.
Special Notes:
1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options).
2. KNOX will be tripped once you flashed custom binaries to your phone.
(Your warranty may be voided. However this may not affect you if your country forces Samsung to provide hardware warranty regardless of software status.)
3. Samsung Firmware OTA (aka System Updates) will no longer work once you flashed custom binaries.
(You can flash custom ROMs if you want to keep the OS up-to-date.)
4. All apps that use KNOX like Samsung pay, Secure Folder and maybe more will no more work
Download: Note 20/Note 20 Ultra(Exynos variants)
Download
Sources:
Kernel source
TWRP source
Device Tree: Sorry are not under GPL License since are my own so they will not get released
Changelog:
03.09.2020
- V4 Release
- Twrp boots now without nulled Vbmeta.img
03.09.2020
- V3 Release
- Fixed Optics and Prism Backup and Restore
- Brightness is now no more at max
- CPEFS error is gone
- Sec-EFS added in the FStab
26.08.2020
- V2 Release that fixes Problems booting in TWRP (RKP was not disabled in kernel config)
24.08.2020
-Initial Release
Discord server for support:
https://discord.gg/BCHTXSQ
Bugs:
-MTP and Encryption (ADB PUSH WORKS when you disable mtp in TWRP mount settings!)
XDA:DevDB Information
[RECOVERY] TWRP for Galaxy Note 20/Note 20 Ultra, Kernel for the Samsung Galaxy Note 20 Ultra
Contributors
geiti94
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2020-09-03
Created 2020-08-24
Last Updated 2020-10-18
Guide:
Go to Developer settings and enable oem unlock
power off the device and boot in download mode with vol up+ vol down buttons and plug in the usb (make sure usb cable is connected to the pc)
in download mode you see the long press vol up option for unlock bl
unlock the bootloader (that will wipe your device so be sure you made a backup of your data)
after bootloader unlock boot up the phone and make sure it is connected to the internet or he triggers rmm prenormal
setup the phone without google account etc
reboot in download mode and flash twrp tar for your device with odin in the AP field
hold vol up + power button while odin is flashing until you are in twrp.
format data in twrp and disable encryption! (Encryption disabler is in download folder!)
Flash Latest Magisk
press reboot to system in twrp.
Kudos to you!
Will test tomorrow when get my device. Fun begins!
geiti94 said:
Guide:
Go to Developer settings and enable oem unlock
power off the device and boot in download mode with vol up+ vol down buttons and plug in the usb (make sure usb cable is connected to the pc)
in download mode you see the long press vol up option for unlock bl
unlock the bootloader (that will wipe your device so be sure you made a backup of your data)
after bootloader unlock boot up the phone and make sure it is connected to the internet or he triggers rmm prenormal
setup the phone without google account etc
reboot in download mode and flash twrp tar for your device with odin in the AP field
hold vol up + power button while odin is flashing until you are in twrp.
format data in twrp and disable encryption! (Encryption disabler is in download folder!)
Flash Latest Magisk
press reboot to system in twrp.
Click to expand...
Click to collapse
Is it compatible with super img. partitions? Does it mount /system, /data, etc?
Great! Number one!
rodrigofd said:
Is it compatible with super img. partitions? Does it mount /system, /data, etc?
Click to expand...
Click to collapse
Yes but flashables needs to be made for super partition
geiti94 Bro. You are Simply Outstanding and You Kick My Bro. Huge Thanks Buddy.
Dr Ketan My Bro. Thanks For All your Time and Hard Work.
Anyone tried this?
Mine doesn't boot to twrp
I could only wrong as recovery, in which I had created a tar that did not contain the vbmeta.
It doesn't start for me, German N986B, it gets stuck in the screen.
i had this issue i am stuck now with no rom
AboodySahhaf said:
i had this issue i am stuck now with no rom
Click to expand...
Click to collapse
Flash magisk patched AP file
dr.ketan said:
Flash magisk patched AP file
Click to expand...
Click to collapse
Can you give me the link of the method
AboodySahhaf said:
Can you give me the link of the method
Click to expand...
Click to collapse
Read my how to root thread in general section
I didn't got the TWRP to Work so next thing i did was :
OEM Unlock
Unlock Bootloader
Factory Reset (because of unlock bootloader)
Setup Device and install Magisk Manager.
Download Stock FW
Extract Boot.img
Put Boot.img on to phone.
Patch boot.img with magisk manager.
extract output file name it boot.img.
Create TAR file of boot.img (boot.tar)
Flash TAR file with Odin AP slot.
Now Succesfully rooted
Sigh... when we only got the Exynos variants here in Korea, TWRP was only released for Snapdragon. Now that Snapdragon is released in Korea, TWRP is only available for Exy XD
Still, job well done~
@geiti94
Last test version you sent me booted fine. Testing further now :good:
:good:
so twrp is fixed. thx to @dr.ketan for testing it since i dont got the n20 since is like a downgrade for me (i still love the 5000mah battery of my s20 ultra). i see next month if get it or not. was my fault that twrp dont booted because on n20 kernel config i forgot to disable rkp
Code:
You've sent *** CHF to [email][email protected]*com[/email]
@geiti94 Here small token of appreciation kindly accept. Request users to support geiti for more development & his well deservet efforts!
Regards
dr.ketan said:
@geiti94
Last test version you sent me booted fine. Testing further now :good:
Click to expand...
Click to collapse
Thank you guys.
Does backup/restore work?

Development [ROM][12/12.1][UNOFFICIAL] crDroid 8.2/8.4

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/12.1/README.mkdn
* Vanilla builds (no gapps)
Download:
| MEGA | Google Drive |
Google Applications (optional):
NikGApps: https://nikgapps.com/
Information: Flash the GApps before first boot. If not, a clean flash is recommende
NOTES (Read First):
1. This ROM is for testing purposes only and may contain unexpected bugs
2. This ROM has nothing related to ODM images! So you don't need to ask/install anything like that, just follow the instructions.
3. This ROM will never work with any versions of Google Camera (GCam)!
4. You need to flash Stock Android 11 before flashing this ROM.
5. For VoLTE, you need to boot into stock firmware and enable it before flashing this ROM!
6. If you came from SODP ROMs, you need to go back to official Android 11 firmware, and boot into launcher.
Install:
Make sure you upgraded to Official Android 11 from Sony (It is recommended to use 61.0 A.23.20)
Unlock bootloader is necessary
Download latest platform-tools from google
1. Install fastbootd drivers, guidance
2. Put your device into bootloader by volume up key.
3. Enter fastbootd:
Code:
fastboot reboot fastboot
4. Flash ROM:
Code:
fastboot flash boot boot.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system vbmeta_system.img
fastboot erase metadata
fastboot flash system system.img
fastboot flash system_ext system_ext.img
fastboot flash product product.img
fastboot flash vendor vendor.img
5. If you are first time to flash, Wipe the old userdata:
Code:
fastboot erase userdata
GApps:
Flash the LineageRecovery first
Boot into Recovery then choose Apply update - Apply from ADB, then sideload the gapps package on your PC with adb tool:
Code:
adb sideload <PATH OF GAPPS>
Root access:
Flash Magisk in recovery.
Source Code:
ROM: https://github.com/crdroidandroid
Device Tree: https://github.com/sony-lahainadev
Also thanks to:
Sjll ShionKagurazaka Lyllrin ReallySnow Hellobbn EggOxygen
The LineageOS Team
The CyanogenMod Team
ROM OS Version: Android 12/12.1
ROM Kernel: Linux 5.4
Based on: AOSP
Version Information
Status: Beta
Current Version: 2022-04-26
Important note
1. This ROM build is based on official Android 11, not Android 12.(Because still no kernel source for a12.)
2. This build is highly experimental and for testing purpose only.
3. This ROM may not be able to pass SafetyNet check.
4. I borrowed this phone from my friend but I'll return it recently, so there should be no update in the future. If you want to build your favorite ROM, you can use my device tree.
ChangeLog
20220426: The first bootable version.
FEATURES AND ISSUES
Code:
- Boot: Ok
- Bluetooth: Ok
- WiFi: Ok
- WiFi Hotspot: Ok
- Wireless display: Not tested
- RIL - Phone - Data: Ok
- VoLTE: Ok
- GPS: Ok
- Camera: Ok
- Camcorder: Ok(HDR recording not work in Sony camera applications)
- Lights: Ok
- MicroSD: Ok
- Accelerometer: Ok
- Compass: Ok
- Gyroscope: Ok
- QTI sensors: Ok
- Touchscreen: Ok
- FM Radio: NA
- Fingerprint: Ok
- Vibrator: Ok
- Microphone: Ok
- Audio & music: Ok
- Bluetooth audio: Ok
- NFC: Ok
- Kernel: Ok
- Graphics: Ok
- 3D Rendering: Ok
- Clock: Ok
- DRM: Widewine L3
- Offline Charging: Ok
- USB: Ok
- USB Tethering: Ok
- USB OTG: Not tested
- Encryption: Ok
- SEPolicies: Enforce
* If the clock stops running, uninstall the built-in clock with ADB, and then download the clock installation package from apkpure to reinstall it
* You may need to give Google play networking permission manually.
How exactly do I downgrade to android 11? i have the 61.0.A.23.20 tar.bz2 file from sony but i have no idea what to do with it
Firebuster said:
How exactly do I downgrade to android 11? i have the 61.0.A.23.20 tar.bz2 file from sony but i have no idea what to do with it
Click to expand...
Click to collapse
Use 7zip to unzip firmware. If the unzipped file is the same as that in the picture, download newflasher v52 and put it in it to run.
Cramfs28_Cheng said:
View attachment 5599633Use 7zip to unzip firmware. If the unzipped file is the same as that in the picture, download newflasher v52 and put it in it to run.
Click to expand...
Click to collapse
Yeah turns out what I have is the source code for that version. I just downloaded the US version someone backed up here and I'm hoping that it works on my UK device without too many issues
ROM has passed the SafetyNet check.
I guess we need twrp for infinite reboots if change something and the system does not like it.
Otherwise you just have to reflash and lose everything.
Does this rom have built in signature spoofing to install microg?
been really hanging to try this one, but also been looking on and off for months now for said 61.0.A.23.20 rom with no luck.
any chance someone can point me to a download link for this? I had already upgraded way past this version using OTAs and now I'm just stuck with this.
harry655 said:
been really hanging to try this one, but also been looking on and off for months now for said 61.0.A.23.20 rom with no luck.
any chance someone can point me to a download link for this? I had already upgraded way past this version using OTAs and now I'm just stuck with this.
Click to expand...
Click to collapse
right under the folder tree
Dropping in to say thanks. Been running this for couple months with no issues. Rom is solid.

[ROM][OneUI 3.1][SM-T295][gto] NevaOS for Galaxy Tab A 8.0 2019 [10-09-2022]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NevaOS for Galaxy Tab A 8.0" 2019
Code:
Before you get started,
i am not responsible for bricking device, dead sdcards,
muted alarm, or even thermonuclear war.
YOU chose to do this modification,
IF you point your finger to me to brick your device,
i will laugh at you.
MAIN FEATURES
Based on T295XXU4CVG3 XEV firmware
Full OneUI 3.1 experience (no Core)
OneUI 4.1 Calendar, Contacts, Clock, Gallery, Weather apps
iOS 15.5 emojis
Advanced Edge Lighting effects
Built-in Samsung Screen Recorder
Multi user
VoLTE by default (XEV and XTC regions only for now)
Realtime Network speed on statusbar (XEV and XTC regions only for now)
MORE FEATURES
Powered by prebuilt 4.9.227-perf kernel
Data partition encryption removed
FRP and OEM lock removed
Disabled hash checksum in vbmeta
Small performance and feature tweaks here and there
Force Vulkan renderer
Disabled Native Blur for more performance (Blur on QS is still available)
Set Spotify songs as Alarm
Enabled Flagship navigation animations
Music doesn't pause when camera is open
BUGS
Calendar might force crash once or twice on first boot, close it and ignore
You tell me
HOW TO FLASH
PREREQUISITES
- On a Q/R OneUI ROM with U3/4 bootloader
- OEM unlock on and an unlocked bootloader
DIRTY FLASH
Step 1: Download the .tar ROM and latest ODIN (v3.14.4 is included in the Drive folder)
Step 2: Open ODIN and put the ROM file in AP section
Step 3: Restart your device to Download mode and press Start on ODIN
Step 4: Wait for it to finish and automatically reboot
CLEAN FLASH
Step 1: Download the .tar ROM and latest ODIN (v3.14.4 is included in the Drive folder)
Step 2: Open ODIN and put the ROM file in AP section
Step 3: Shut down your device and boot to Recovery Mode by long pressing Power + Volume Up
Step 4: Use Power and Volume keys to navigate to Wipe data/Factory reset
Step 5: Use Power and Volume keys to navigate to Reboot to Bootloader
Step 6: Press Start on ODIN
Step 7: Wait for it to finish and automatically reboot
DOWNLOAD
Google Drive
Filename: AP_T295XXU4CVG3_NEVAOS_220910_user_OS11.tar
MD5: 1a5f9feac0ac0f2b12f5ac5d6c76fd55
Screenshots attached below
CREDITS
@el0xren for many tweaks
[email protected] for testing
SUPPORT
Telegram Group
Telegram Channel​
Contributors
ping2109
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: Q/R Bootloader
Based On: OneUI 3.1
Created 2022-09-10
Last Updated 2022-09-10
​
Reserved
Hello
Possible to flash this on SM-t297?
Been looking for a ROM for T295 for quite some time now. Stock ROM is sluggish as hell so resorted to flashing this.
Not that it's a big issue, but the Calendar still crashes even after first boot (saw in the Issues part that it only does that during first boot) but yeah, everything's good so far.
EDIT: Not sure why but just noticed that Netflix isn't showing up on Play Store. Was able to pull up the app page on Play Store by searching on Chrome first. On the page, it says that the device isn't compatible with the version of the app.
PingVN said:
View attachment 5708323
NevaOS for Galaxy Tab A 8.0" 2019
Code:
Before you get started,
i am not responsible for bricking device, dead sdcards,
muted alarm, or even thermonuclear war.
YOU chose to do this modification,
IF you point your finger to me to brick your device,
i will laugh at you.
MAIN FEATURES
Based on T295XXU4CVG3 XEV firmware
Full OneUI 3.1 experience (no Core)
OneUI 4.1 Calendar, Contacts, Clock, Gallery, Weather apps
iOS 15.5 emojis
Advanced Edge Lighting effects
Built-in Samsung Screen Recorder
Multi user
VoLTE by default (XEV and XTC regions only for now)
Realtime Network speed on statusbar (XEV and XTC regions only for now)
MORE FEATURES
Powered by prebuilt 4.9.227-perf kernel
Data partition encryption removed
FRP and OEM lock removed
Disabled hash checksum in vbmeta
Small performance and feature tweaks here and there
Force Vulkan renderer
Disabled Native Blur for more performance (Blur on QS is still available)
Set Spotify songs as Alarm
Enabled Flagship navigation animations
Music doesn't pause when camera is open
BUGS
Calendar might force crash once or twice on first boot, close it and ignore
You tell me
HOW TO FLASH
PREREQUISITES
- On a Q/R OneUI ROM with U3/4 bootloader
- OEM unlock on and an unlocked bootloader
DIRTY FLASH
Step 1: Download the .tar ROM and latest ODIN (v3.14.4 is included in the Drive folder)
Step 2: Open ODIN and put the ROM file in AP section
Step 3: Restart your device to Download mode and press Start on ODIN
Step 4: Wait for it to finish and automatically reboot
CLEAN FLASH
Step 1: Download the .tar ROM and latest ODIN (v3.14.4 is included in the Drive folder)
Step 2: Open ODIN and put the ROM file in AP section
Step 3: Shut down your device and boot to Recovery Mode by long pressing Power + Volume Up
Step 4: Use Power and Volume keys to navigate to Wipe data/Factory reset
Step 5: Use Power and Volume keys to navigate to Reboot to Bootloader
Step 6: Press Start on ODIN
Step 7: Wait for it to finish and automatically reboot
DOWNLOAD
Google Drive
Filename: AP_T295XXU4CVG3_NEVAOS_220910_user_OS11.tar
MD5: 1a5f9feac0ac0f2b12f5ac5d6c76fd55
Screenshots attached below
CREDITS
@el0xren for many tweaks
[email protected] for testing
SUPPORT
Telegram Group
Telegram Channel​
Contributors
ping2109
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: Q/R Bootloader
Based On: OneUI 3.1
Created 2022-09-10
Last Updated 2022-09-10
​
Click to expand...
Click to collapse
Is this an actual 10t rom or is this for the galaxy ?
maamdroid said:
Is this an actual 10t rom or is this for the galaxy ?
Click to expand...
Click to collapse
****, it's for the ****ing galaxy. My bad bro, I didn't read it right. Sorry for wasting your time!
xev csc block oem unlock for me
sad
cant do it anymore or even escape from this xev
even flash my country csc cant
Hey, I have a question?
Can you pre root this rom?
I tried many rooting techniques but none of them work
the contacts app crash when clicking edit on contact and bedtime routine in clock app crash aswell (clean flash)
AsrieltheGoat said:
Hey, I have a question?
Can you pre root this rom?
I tried many rooting techniques but none of them work
Click to expand...
Click to collapse
There's no way to root this tablet on U4 bootloader on OneUI unfortunately, you can resort to installing an AOSP Phh GSI where PhhSuperuser is available.
PingVN said:
There's no way to root this tablet on U4 bootloader on OneUI unfortunately, you can resort to installing an AOSP Phh GSI where PhhSuperuser is available.
Click to expand...
Click to collapse
Thanks for your reply!
I will have to try out the gsi
Also, I did downgrade my tablet back to Android 10, I hope your will make a rom for it too
I can send you the android 10 odin file, if you need it
Does this ROM support Simultaneous OTG and Charge?
wifi isn't working (clean flash)
Many thanks for giving us this option to work with.
Like the user above I'm having issue with wifi. The wifi toggle switch works, but wifi does not process.
The message "Turning on ..." shows up and remains there. The circle animated processing indicator besides the toggle switch does not stop animating. This was a dirty flash.
Again, many thanks.
i got vbmeta fail in odin , not sure what it is but device boot up OK
Hello everybody, i am not tryinf to flash this ROM ,but i have a question maybe someone here can help me, how can i access to the test mode in this tablet....doing the *#0*# is not wroking thanks in advance
denpad2010 said:
Hello everybody, i am not tryinf to flash this ROM ,but i have a question maybe someone here can help me, how can i access to the test mode in this tablet....doing the *#0*# is not wroking thanks in advance
Click to expand...
Click to collapse
just boot to download mode and flash it using odin , no need to do *#0*#
Hello everyone.
I'm on Android 11 with t295XXS5CWA2. It turns out that I can't find a rom to download to android 10, and then to 9.
Someone give me a hand please (Y).

Categories

Resources