Related
Treble Flashing Guide For All nokia treble enabled phones
Note -1. Before Doing These Steps Your device bootloader should be unlocked. otherwise you may brick your device.
2.Copy img files according to GSI Android Version
Example - iam using Nokia 6.1 Plus & i want to flash Pixel-ex-periance-9
in my phone using GSI
METHOD 1 - VIA CMD
1. copy vendor.img & boot.img form Android 9 stock ota.zip or OST File
2. download gsi from aosp , lineage , pixel experiance etc but choose ab Arm 64
3. now keep 3 files in one folder
4. open cmd in that folder
5. now turn of your mobile and go to download mode
6. now type fastboot devices
7. type fastboot -w
8. type fastboot flash vendor vendor.img
9. type fastboot flash system PixelExperienceP-arm64-ab.img
10. type fastboot flash boot boot.img
11. type fastboot -w
12. fastboot reboot
METHOD 2 - VIA TWRP
1. copy Those 3 img files to your directory internal or external
2. wipe everything except your internal & sd
3. select install img
4. select vendor.img and select vendorimage in partition box swipe to flash
5. next select PixelExperienceP-arm64-ab.img and select systemimage in partition box swipe to flash
6. next select boot.img and select boot in partition box swipe to flash
7. reboot system
Download stock Vendor.img & boot.img files from the below links
Android 9 https://drive.google.com/open?id=1WC9iGS8QnnnBmG4KKL3sEcqlR8LceBUt
Android 8.1.0 https://drive.google.com/open?id=1yY3QvUCYKDXlfn9bREObS2XwCScnU-EN
Please Hit Thanks Button If You Understand My Guide. Hope Every One Will Boot GSI Successfully In Your Phones. Keep Going...!!!
Thank you
can you post 6.1plus vendor IMG and boot IMG here please
Or links
pawankonjarla said:
can you post 6.1plus vendor IMG and boot IMG here please
Or links
Click to expand...
Click to collapse
links updated now
BootLoader
Should the bootloader be unlocked to flash via CMD??
Thanks:good:
nikash07 said:
Should the bootloader be unlocked to flash via CMD??
Thanks:good:
Click to expand...
Click to collapse
yes Need to unlock your bootloader before flashing GSI Or else you may Brick your device
Raghu varma said:
yes Need to unlock your bootloader before flashing GSI Or else you may Brick your device
Click to expand...
Click to collapse
How to unlock bootloader, especially after August Security patch coz HMD doesn't allow to unlock bootloader of 6.1 plus anymore
nikash07 said:
How to unlock bootloader, especially after August Security patch coz HMD doesn't allow to unlock bootloader of 6.1 plus anymore
Click to expand...
Click to collapse
Just Go to Nearest Nokia Care Point And tell them Iam not comfort with Android Pie i want to revert back to oreo june Security Patch So Just Inform Them i mean tell them to flash DRG-229D File . This file will directly goes down to oreo june security Patch And give the mobile to them they will flash in 2minutes And request Unlock Key Just by in searching Google.
Raghu varma said:
Just Go to Nearest Nokia Care Point And tell them Iam not comfort with Android Pie i want to revert back to oreo june Security Patch So Just Inform Them i mean tell them to flash DRG-229D File . This file will directly goes down to oreo june security Patch And give the mobile to them they will flash in 2minutes And request Unlock Key Just by in searching Google.
Click to expand...
Click to collapse
I don't think Nokia is going to accept this and flash Oreo just like that.
nikash07 said:
I don't think Nokia is going to accept this and flash Oreo just like that.
Click to expand...
Click to collapse
Bro I updated to pie and went to care point and said some complaints about pie.they finally downgraded my phone . For example tell them Iam not comfort with pie so just flash DRG-229D File using ost. This file belongs to Oreo june security patch .
I have removed the Telegram link in your OP. Posting Telegram links or other ways of promoting social media is not allowed on XDA.
Forum Rules said:
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
Click to expand...
Click to collapse
Raghu varma said:
Treble Flashing Guide For All nokia treble enabled phones
Note -1. Before Doing These Steps Your device bootloader should be unlocked. otherwise you may brick your device.
2.Copy img files according to GSI Android Version
Example - iam using Nokia 6.1 Plus & i want to flash Pixel-ex-periance-9
in my phone using GSI
METHOD 1 - VIA CMD
1. copy vendor.img & boot.img form Android 9 stock ota.zip or OST File
2. download gsi from aosp , lineage , pixel experiance etc but choose ab Arm 64
3. now keep 3 files in one folder
4. open cmd in that folder
5. now turn of your mobile and go to download mode
6. now type fastboot devices
7. type fastboot -w
8. type fastboot flash vendor vendor.img
9. type fastboot flash system PixelExperienceP-arm64-ab.img
10. type fastboot flash boot boot.img
11. type fastboot -w
12. fastboot reboot
METHOD 2 - VIA TWRP
1. copy Those 3 img files to your directory internal or external
2. wipe everything except your internal & sd
3. select install img
4. select vendor.img and select vendorimage in partition box swipe to flash
5. next select PixelExperienceP-arm64-ab.img and select systemimage in partition box swipe to flash
6. next select boot.img and select boot in partition box swipe to flash
7. reboot system
Download stock Vendor.img & boot.img files from the below links
Android 9 https://drive.google.com/open?id=1WC9iGS8QnnnBmG4KKL3sEcqlR8LceBUt
Android 8.1.0 https://drive.google.com/open?id=1yY3QvUCYKDXlfn9bREObS2XwCScnU-EN
My Teligram Group Link All Are invited And Feel Free to Ask your Questions MOD EDIT: LINKS REMOVED
My Teligram Channel For the Further Information
Please Hit Thanks Button If You Understand My Guide. Hope Every One Will Boot GSI Successfully In Your Phones. Keep Going...!!!
Thank you
Click to expand...
Click to collapse
the Doctor said:
I have removed the Telegram link in your OP. Posting Telegram links or other ways of promoting social media is not allowed on XDA.
Click to expand...
Click to collapse
thanks for the information. I won't repeat this again
thank you very much
Can we unlock now?
And
How to flash stock rom
I installed AEX gsi, but without TWRP I can't install gapps. Anyone know how to install gapps another way?
paul89rulez said:
thank you very much
Click to expand...
Click to collapse
Welcome
bbcastro said:
I installed AEX gsi, but without TWRP I can't install gapps. Anyone know how to install gapps another way?
Click to expand...
Click to collapse
Well now twrp thread is up in nokia 6.1 kenel and recovery development section check it out
earlier treble gsi's had issues with Nokia phones Sim cards not being detected - has this been resolved, specifically relating to TA-1103?
So should I download From "A" only roms or "A/AB" roms?
Nokia X6 with Custom Oreo ROM - How to load stock Android Pie 6.1 plus image
Hi,
I bought a Nokia X6 in September 2018 (6GB/64GB) and would like to install the Stock Nokia 6.1 Plus Android 9 image.
I see my phone is rooted and it shows the message "Your device has loaded a different operating system." everytime I start it and I have to use Magisk to hide several banking applications.
The phone works great and I knew it was going to be relased in Europe eventually, but I am scared to brick it by loading the Android 9 Image.
I already tried attempting the update through OTA but the zip file is ignored. Nothing happens.
I am new to this forum so I don't know if my question has been asked by someone else.
Can you please help me?
Thank you!
Image size is bigger than target device..
I am using nokia 6.1 plus .. its support project treble , and its ab device..
When i try to flash a gsi rom bigger than 2.5 gb its also eror that image size is bigger than target device ...:crying:
Many popular gsi like oos, one, hydrogen, color os file size over than 2.5 gb .. so always shows this eror..
Any solution for this eror..??
---------- Post added at 04:03 PM ---------- Previous post was at 03:28 PM ----------
I am using nokia 6.1 plus .. its support project treble , and its ab device..
When i try to flash a gsi rom bigger than 2.5 gb its also eror that image size is bigger than target device ...:crying:
Many popular gsi like oos, one, hydrogen, color os file size over than 2.5 gb .. so always shows this eror..
Any solution for this eror..??
Project Treble For Xperia XBased on Sony Open DevicesThanks to Pavel's KernelI am not responsible for bricked devices, dead SD cards,.Suitable for F5121 and F5122Reboot after your first boot please!
请中文用户遵守XDA规则，使用双语留言
If Your Camera doesn't work, see #141 please
Required files:
Our treble file could support Erfans's Android Q GSI, You need to flash this fix.
If you meet crash, you need to delete vendor/overlay.
If you meet endless bootanimite, Try to force reboot.
[New SODP Kernel version]
V20190812:Link With: SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_loire.zip
V20190811:Link With: SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_loire.zip
[Pavel's Kernel versions]
V20190702:Link With: SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_loire.zip
V20190503:Link With: SW_binaries_for_Xperia_Android_9.0_2.3.2_v8_loire.zip
V20190501:Link With: SW_binaries_for_Xperia_Android_9.0_2.3.2_v8_loire.zip
[Old SODP Kernel versions]
V20190429:Link With: SW_binaries_for_Xperia_Android_9.0_2.3.2_v8_loire.zip
V20190323:Link With: SW_binaries_for_Xperia_Android_9.0_2.3.2_v7_loire.zip
V20190210:Link With: SW_binaries_for_Xperia_Android_9.0_2.3.2_v5_loire.zip
[OEM-File]
DownloadLink
[TWRP-Q]
DownloadLink
How to go Treble?
First: Flash Twrp I built which supports a Vendor Partition
Code:
fastboot flash recovery < Path of recovery.img >
Second:Wipe Data and Cache, then flash Treble-X-sjll-XXX.zip in Twrp .
Notice:If you failed when flashing Treble-X-sjll-XXX.zip in Twrp or can't boot into desktop. Please do follwing command:
Code:
fastboot flash boot < Path of boot.img >
Code:
fastboot flash cache < Path of vendor.img >
Third: flash SW_binaries provided by Sony.
You can download it from Sony official website.
Code:
fastboot flash oem < Path of OEM.img >
Optional step If treble file without system
Fourth: Flash a GSI compatible System image and boot!
Code:
fastboot flash system < Path of GSI-System.img >
Google Camera Guide:
1.Gcam must work with Google play services.
2. Suzu doesn't support raw Format Raw10, we should set raw Format to Raw Sensor .
3.We should set Viewfinder Format to YUV_420_888
4.Please enable: Buffer Fix to Fix viewfinder lags.
5. Suzu only support Init SlowMo at 120 FPS
Recommend Gcam Version:
ARNOVA8G2 Link
Gcam_6.1.021_Advanced_V1.7beta3.190707.0105.apk
Gcam_6.2.030_Advanced_V2.2beta5.190704.1015.apk
Update and known BUG:
20190812:
Update:
1. Thermal back, you will not hot in this summer.
2. CPU quiet back, suzu will be cold as ice.
3. F2FS support for cache(Qnovo) and userdata partitions.
20190811:
Update:
1. Go back to SODP kernel.
2. Performance and stability improve.
3. A lot of Fixes of SODP.
20190716:
Update:
1. New twrp-Q uploaded.
V20190702:
Fixes:
1. Cancel OverClock.
2.New CAF imported in kernel.
3.Forcecryptable canceled. If you upgrade from old version, you need to format userdata and use new TWRP-Q.
Bugs:
Need feedback.
V20190503:
Fixes:
1. New PowerHAL.
Bugs:
Need feedback.
V20190501:
Fixes:
1. Use Pavel's kernel source codes.
2. Quick Charge 3.0 works fine.
Bugs:
Need feedback.
V20190210:
Bugs:
1. Quick Charge is broken, you can use computer USB port charge.
2. Camera doesn't work on first boot, you need to reboot.
Source Codes
Sjll
Kernel
Contributors
Sjll @Cubbins
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Paypal
I am very happy to receive your donation.
Version Information
Status: Testing
Created 2019-02-10
Last Updated 2019-08-12
Hi! And it is possible to flash system.img via TWRP?
Since the latest TWRP (3.2.2.2) can flash those partitions, can we flash through it?
realthrash said:
Since the latest TWRP (3.2.2.2) can flash those partitions, can we flash through it?
Click to expand...
Click to collapse
no, I tried
Is it A Only or A/B type?
sebasrock156 said:
Is it A Only or A/B type?
Click to expand...
Click to collapse
A only.
[email protected] said:
Hi! And it is possible to flash system.img via TWRP?
Click to expand...
Click to collapse
realthrash said:
Since the latest TWRP (3.2.2.2) can flash those partitions, can we flash through it?
Click to expand...
Click to collapse
Use the twrp provided by me, it can flash these partition with an img file.
After install this ROM..I dont have root acces and how to enter the treble twrp because I cant enter it after flashed this ROM:crying:
So I just installed the ROM.
On my first try, it just did not boot. Stuck at Sony logo. I then flashed the latests stock .ftf, did the installation again and managed it to boot. Seems that I did not have the latest bootloader
After the initial boot, I wanted to enter recovery again, but could not get into it. I then flashed TWRP 3.2.3.2 and could install the gapps from there. The system also runs with this recovery.
What I already tested:
- camera shows only up to 17,1 Megapixels, but works
- front camera works
- camera button works
- WIFI works
- mobile data wiht LTE work, but I had to type in the APN manually
- phone calls work
- fingerprint works
- bluetooth works, but I cannot pair with my Garmin watch (have the same problem when using lineage OS)
Overall the system looks and feels really great! Added some screenshots too!
Well done, @Sjll ; Thank you very much!
Thelooks14 said:
After install this ROM..I dont have root acces and how to enter the treble twrp because I cant enter it after flashed this ROM:crying:
Click to expand...
Click to collapse
Just using fastboot flash a GSI in system partition.
Please use the twrp I privide for treble.
If you want to go to recovery, just shutdown and hold power and Vol-.
sessions04 said:
So I just installed the ROM.
On my first try, it just did not boot. Stuck at Sony logo. I then flashed the latests stock .ftf, did the installation again and managed it to boot. Seems that I did not have the latest bootloader
After the initial boot, I wanted to enter recovery again, but could not get into it. I then flashed TWRP 3.2.3.2 and could install the gapps from there. The system also runs with this recovery.
What I already tested:
- camera shows only up to 17,1 Megapixels, but works
- front camera works
- camera button works
- WIFI works
- mobile data wiht LTE work, but I had to type in the APN manually
- phone calls work
- fingerprint works
- bluetooth works, but I cannot pair with my Garmin watch (have the same problem when using lineage OS)
Overall the system looks and feels really great! Added some screenshots too!
Well done, @Sjll ; Thank you very much!
Click to expand...
Click to collapse
You can flash a GSI to get better experience. Thanks for your feedback!
Sjll said:
Just using fastboot flash a GSI in system partition.
Please use the twrp I privide for treble.
If you want to go to recovery, just shutdown and hold power and Vol-.
Click to expand...
Click to collapse
Where I can download GSI?
sessions04 said:
So I just installed the ROM.
On my first try, it just did not boot. Stuck at Sony logo. I then flashed the latests stock .ftf, did the installation again and managed it to boot. Seems that I did not have the latest bootloader
After the initial boot, I wanted to enter recovery again, but could not get into it. I then flashed TWRP 3.2.3.2 and could install the gapps from there. The system also runs with this recovery.
What I already tested:
- camera shows only up to 17,1 Megapixels, but works
- front camera works
- camera button works
- WIFI works
- mobile data wiht LTE work, but I had to type in the APN manually
- phone calls work
- fingerprint works
- bluetooth works, but I cannot pair with my Garmin watch (have the same problem when using lineage OS)
Overall the system looks and feels really great! Added some screenshots too!
Well done, @Sjll ; Thank you very much!
Click to expand...
Click to collapse
can you still enter recovery mode now?
I could only enter recovery with TWRP 3.2.3.2!
So I jused Sjll's recovery vor initial installation and then changed to 3.2.3.2
But I am not sure, if the Treble updates will work with this TWRP...
I used your guide to install another treble ROM
Thanks
One question:
I can root without any problem, but if I reboot the phone the data partition gets encrypted, ¿what can I do to solve this?
Today I made a lot of pictures with the front camera and with the back camera. . AF just doesn't get a sharp picture. Front camera is totaly useless for selfies, even with perfect light conditions.
I downloaded Google Camera app, which makes it a little bit better, but still not comparable to the stock Sony Camera App. Oh, and it just shows 13 MPx max res.
Too bad!
Anyone here with better results?
sessions04 said:
Today I made a lot of pictures with the front camera and with the back camera. . AF just doesn't get a sharp picture. Front camera is totaly useless for selfies, even with perfect light conditions.
I downloaded Google Camera app, which makes it a little bit better, but still not comparable to the stock Sony Camera App. Oh, and it just shows 13 MPx max res.
Too bad!
Anyone here with better results?
Click to expand...
Click to collapse
These are bugs of SODP. only waitting for their fix.
where to get boot.img?I can't flash zip
There is a Link in the first post, next to
"[Tested]
V20190210 Link... "
You find the "twrp-Q.img" there.
1. please read this very carefuly.this guide is made from my personal experience.
like some members of this forums told me and i think a little about it,there can be problem about downgrade to oreo with devices who have unlock device from operator.but i believe can be easily unlock with talk with operators,not sure,but be best to check it out by self.
firstly i am not noob,i am developer and compiler for many mtk device. sadly this is my FIRST
samsung device also snapdragon. so for me completely unknown.i want in first root and do custom roms but untill now
i dont find any device tree for this device.kernel source i have but device and vendor tree not.then i found i can
flash gsi on this device. so i do as i will explain in following text.
2. as many other of you i have update device on PIE and next days i install update i found possibility to flash gsi,
so i try. i found patched pie boot.img and try to flash gsi roms but none of them isnt boot.so i stop and again read gsi guide
for flash gsi.i read that devices shipped with some firmwares have chance to flash gsi roms.so i found oreo rom
for our device and flash it with odin.rom is boot without any problems.i set up all things as normall(google account)
and after all setup i go to device info and tap on build numbers 7-10 times and then developer settings is open,then i
checked if is there oem unlocking.(if you dont set up google account this settings will not shown(oem unlocking)).
when i see is ok and there,i power off device,go to download mode and connect with pc,and open odin,
and flash twrp(again thanks to ashyx).dont let odin to boot system(turn off auto rebbot in option),
so i reboot to recovery,go to wipe,choose format data,write yes and swipe.
after that i reboot to recovery you MUST flash oreo enforcing.zip,rmm and oreo patched boot.and go to install choose micro sd card and go to flash img. choose gsi rom you want and
flash it as system(pop up windows will ask wich partition you choose(system),then swipe to flash,after flashing you flash magisk,
and go to mount and mount system and reboot to system. firstly your device can reboot once-twice during,but dont worry
after that will go to boot and in short time,one- two minutes will boot.
3.now i must warning you.many of gsi roms work properly,but have many bugs.mtp dont works with pc in boot up,but in recovery
works without problems.for me is not problem,i can live with it.
3.1.sim card 2 is work but sim card 1 is not see it.also i can live with it.most of time i use 1 sim card,not both.
3.2.fm radio isnt show,and not work.
4.in short i give you again flash guide.
go to recovery (must be in oreo)
go to wipe-format data,write yes and swipe to format (many say to need back to recovery,i didnt do that but is your choice).
go to sd card and install oreo enforcing.zip,RMM bypass.zip and oreo patched boot.img
go to install and choose flash.img and choose gsi you want,and flash as system
go to install zip and flash magisk
then go to mount,mount system and reboot to system
device will reboot twice or more time and then after minute or two will reboot.be calm.
after device is reboot,enjoy.:good:
i will post some screenshots of booted gsi roms.oreo and pie.
list of booted gsi rom so far:
1. aex 5.7 oreo
2. aex 6.5 pie
3. aosdp pie(this rom not show network and sim cards)
4. aosp by phusson pie
5. bootlegger oreo
6. descendant 3.0 pie
7. dot os pie(dont show network and simcards)
8. havoc os pie
9. lineage 16 pie
10. RR oreo
11. RR pie
12. system DU oreo
13. xenon hd oreo
GSI with errors:
AOSDP (not shown sim cards,no network,all other stuff work,off course no fm radio)
Evolution X (dont want to boot.)
Octopus OS (dont boot)
Viper OS Official (not shown sim cards,all other stuff work except fm radio)
Dot OS (dont show sim cards,no network,no fm radio)
Liquid Remix (dont boot)
Omni rom (boot but goes constantly on reboot)
Pixel Expirience (boot but no sim cards and no network and no fm radio)
people one more notice: j4+ is ARM A ONLY device,dont flash any other gsi.
deleted
What version of RR Pie did you test? The May Release?
JDBS30 said:
What version of RR Pie did you test? The May Release?
Click to expand...
Click to collapse
all of them.
this link i used and choose one of them from your choice arm a only of course: https://get.resurrectionremix.com/?dir=gsi
I can't install Resurrection Remix
I face so much problems while installing custom roms, I tried Android Pie GSI, Pixel Experience, Resurrection Remix. But All of them crashes at boot animation. What can I do? I can't find any thread about that.
My phone is Samsung Galaxy J4+ (arm aonly).
Please help me?
elfennani said:
I face so much problems while installing custom roms, I tried Android Pie GSI, Pixel Experience, Resurrection Remix. But All of them crashes at boot animation. What can I do? I can't find any thread about that.
My phone is Samsung Galaxy J4+ (arm aonly).
Please help me?
Click to expand...
Click to collapse
my dear friend did you read my guide?. i explain wich gsi roms can flash and how.please read from start to end.it is very clear.
rudi021 said:
my dear friend did you read my guide?. i explain wich gsi roms can flash and how.please read from start to end.it is very clear.
Click to expand...
Click to collapse
Yes, I read everything, I tried Pixel Experience and Android Pie GSI before seeing this thread. So I decided to try Resurrection Remix, But it crashes while boot animation then after the phone gets restarted (bootloop)
elfennani said:
Yes, I read everything, I tried Pixel Experience and Android Pie GSI before seeing this thread. So I decided to try Resurrection Remix, But it crashes while boot animation then after the phone gets restarted (bootloop)
Click to expand...
Click to collapse
like i wrote your device must be on oreo,not on pie.thats my expirience.when i was on pie i cant boot any pie rom.after i flash oreo stock rom and flash twrp i flash and boot almost any gsi wich is aviable.you must be on oreo stock rom and then flash twrp,then flash oreo enforcing,rmm,then format data(write yes and swipe to format),then flash gsi as system,flash magisk,then go to mount and check system then reboot.thats it. maybe is my mistake i didnt write that you must do flash those thing before,but i supose people is knowing what must to do when do flash twrp. sorry.
rudi021 said:
like i wrote you must be on oreo,not on pie.thats my expirience.when i was on pie i cant boot any pie rom.after i flash oreo stock rom and flash twrp i flash and boot almost any gsi wich is aviable.you must be on oreo stock rom and then flash twrp,then flash oreo enforcing,rmm,then format data(write yes and swipe to format),then flash gsi as system,flash magisk,then go to mount and check system then reboot.thats it. maybe is my mistake i didnt write that you must do flash those thing before,but i supose people is knowing what must to do when do flash twrp. sorry.
Click to expand...
Click to collapse
How did you downgrade your firmware?
elfennani said:
How did you downgrade your firmware?
Click to expand...
Click to collapse
i found oreo firmware. if you want you can download from my google drive. here is link: https://drive.google.com/file/d/1KnqHZ8_EVTstJP5AMsMy_8Uc1QV-vMHe/view?usp=sharing
Please help
rudi021 said:
1. please read this very carefuly.this guide is made from my personal experience.
like some members of this forums told me and i think a little about it,there can be problem about downgrade to oreo with devices who have unlock device from operator.but i believe can be easily unlock with talk with operators,not sure,but be best to check it out by self.
firstly i am not noob,i am developer and compiler for many mtk device. sadly this is my FIRST
samsung device also snapdragon. so for me completely unknown.i want in first root and do custom roms but untill now
i dont find any device tree for this device.kernel source i have but device and vendor tree not.then i found i can
flash gsi on this device. so i do as i will explain in following text.
2. as many other of you i have update device on PIE and next days i install update i found possibility to flash gsi,
so i try. i found patched pie boot.img and try to flash gsi roms but none of them isnt boot.so i stop and again read gsi guide
for flash gsi.i read that devices shipped with some firmwares have chance to flash gsi roms.so i found oreo rom
for our device and flash it with odin.rom is boot without any problems.i set up all things as normall(google account)
and after all setup i go to device info and tap on build numbers 7-10 times and then developer settings is open,then i
checked if is there oem unlocking.(if you dont set up google account this settings will not shown(oem unlocking)).
when i see is ok and there,i power off device,go to download mode and connect with pc,and open odin,
and flash twrp(again thanks to ashyx).dont let odin to boot system(turn off auto rebbot in option),
so i reboot to recovery,go to wipe,choose format data,write yes and swipe.
after that i reboot to recovery you MUST flash oreo enforcing.zip,rmm and oreo patched boot.and go to install choose micro sd card and go to flash img. choose gsi rom you want and
flash it as system(pop up windows will ask wich partition you choose(system),then swipe to flash,after flashing you flash magisk,
and go to mount and mount system and reboot to system. firstly your device can reboot once-twice during,but dont worry
after that will go to boot and in short time,one- two minutes will boot.
3.now i must warning you.many of gsi roms work properly,but have many bugs.mtp dont works with pc in boot up,but in recovery
works without problems.for me is not problem,i can live with it.
3.1.sim card 2 is work but sim card 1 is not see it.also i can live with it.most of time i use 1 sim card,not both.
3.2.fm radio isnt show,and not work.
4.in short i give you again flash guide.
go to recovery (must be in oreo)
go to wipe-format data,write yes and swipe to format (many say to need back to recovery,i didnt do that but is your choice).
go to sd card and install oreo enforcing.zip,RMM bypass.zip and oreo patched boot.img
go to install and choose flash.img and choose gsi you want,and flash as system
go to install zip and flash magisk
then go to mount,mount system and reboot to system
device will reboot twice or more time and then after minute or two will reboot.be calm.
after device is reboot,enjoy.:good:
i will post some screenshots of booted gsi roms.oreo and pie.
list of booted gsi rom so far:
1. aex 5.7 oreo
2. aex 6.5 pie
3. aosdp pie(this rom not show network and sim cards)
4. aosp by phusson pie
5. bootlegger oreo
6. descendant 3.0 pie
7. dot os pie(dont show network and simcards)
8. havoc os pie
9. lineage 16 pie
10. RR oreo
11. RR pie
12. system DU oreo
13. xenon hd oreo
GSI with errors:
AOSDP (not shown sim cards,no network,all other stuff work,off course no fm radio)
Evolution X (dont want to boot.)
Octopus OS (dont boot)
Viper OS Official (not shown sim cards,all other stuff work except fm radio)
Dot OS (dont show sim cards,no network,no fm radio)
Liquid Remix (dont boot)
Omni rom (boot but goes constantly on reboot)
Pixel Expirience (boot but no sim cards and no network and no fm radio)
people one more notice: j4+ is ARM A ONLY device,dont flash any other gsi.
Click to expand...
Click to collapse
Thank you for sharing your experience. I was planning on trying to flash a GSI, but I have to wait 7 days for the OEM unlock on Stock Oreo. Of these files you listed, I do not have the "oreo patched boot." This is also necessary, and if so, where do I find it?
Thank you in advance and I count on your help.
Maxmiliano Coelho said:
Thank you for sharing your experience. I was planning on trying to flash a GSI, but I have to wait 7 days for the OEM unlock on Stock Oreo. Of these files you listed, I do not have the "oreo patched boot." This is also necessary, and if so, where do I find it?
Thank you in advance and I count on your help.
Click to expand...
Click to collapse
my dear friend just ask i will help you. this patched boot.img is made by ashyx. i will be bad member if i share his works without permissions.so i share with you his link. here is link for oreo patched boot.img https://androidfilehost.com/?fid=1395089523397921797
please follow instructions carefully. read twice and try to understand.enjoy.if you have any doubt please ask. thank you.
Thanks again. I am waiting for the 7 day period to reappear the OEM unlock option which disappeared when I returned to stock oreo. With your help, the procedure to be performed became clearer. When I do the procedure, can I continue to ask questions if any? I thank you once again.
Maxmiliano Coelho said:
Thanks again. I am waiting for the 7 day period to reappear the OEM unlock option which disappeared when I returned to stock oreo. With your help, the procedure to be performed became clearer. When I do the procedure, can I continue to ask questions if any? I thank you once again.
Click to expand...
Click to collapse
why not.i am not star just ask and if i can help i will please to do that.you can always send me personal message(PM) on xda
Maxmiliano Coelho said:
Thanks again. I am waiting for the 7 day period to reappear the OEM unlock option which disappeared when I returned to stock oreo. With your help, the procedure to be performed became clearer. When I do the procedure, can I continue to ask questions if any? I thank you once again.
Click to expand...
Click to collapse
like https://forum.xda-developers.com/member.php?u=9101376 say in reply if you have unlock before then your device is unlocked.so no need to wait another 7 days.you must just do follow tread for flash recovery.can miss first time,two but read guide and no fear.but you cant miss if you try again. once your device is unlock you can flash no metter numbers of flashing roms(stock 8 or 9)once is unlock thats it.so dont be affraid to ask help here or anywhere on our xda group.always some will help you.:good:
rudi021 said:
like https://forum.xda-developers.com/member.php?u=9101376 say in reply if you have unlock before then your device is unlocked.so no need to wait another 7 days.you must just do follow tread for flash recovery.can miss first time,two but read guide and no fear.but you cant miss if you try again. once your device is unlock you can flash no metter numbers of flashing roms(stock 8 or 9)once is unlock thats it.so dont be affraid to ask help here or anywhere on our xda group.always some will help you.:good:
Click to expand...
Click to collapse
Thank you! I followed in his footsteps and was successful in installing LineageOS 16. Working very well, but I felt a slight problem regarding the audio volume, which is extremely low.
I would like to ask one more question, which is about testing other GSI: Is there a need to install one of those files, or just the image and Magisk?
Thank you very much.
Maxmiliano Coelho said:
Thank you! I followed in his footsteps and was successful in installing LineageOS 16. Working very well, but I felt a slight problem regarding the audio volume, which is extremely low.
I would like to ask one more question, which is about testing other GSI: Is there a need to install one of those files, or just the image and Magisk?
Thank you very much.
Click to expand...
Click to collapse
once you perform flashing gsi,no need repeat every time this steps,just (at least i do like that) format data,reboot to recovery,flash gsi(as system.image) and flash magisk then mount system and reboot.about audio volume install viper fx audio apk(Magisk module),and then fix volume as your own.
kapmino269 said:
If anyone faced problems with booting some roms on
ROM LOGO NOT SAMSUNG .
use this :
https://www.androidfilehost.com/?fid=6006931924117925309
Tested on j415f
RR
AOSP
DESCENDANT ZERO .
Click to expand...
Click to collapse
sorry but this doesnt work on my side of flashing GSI.OREO base. i try on many gsi who doesnt boot but not help. i boot this PIE gsi (on oreo base): descendant 3.1.1.; Prisma os(still cant find way to get network,no sim detected);Havoc os (works perfectly);Dot os 3.0 (same no sim detect); RR 2019-04-06 very nice rom; AEX by enes sastim 2019-05-09(also very nice rom);Viper os (but is Official and dont let use it)(mean boot but no sim works);Zirconium aosp (work well but seems like android kitkat seems so simple(i dont like it);and many more with same problems,they booted but not have network work, or like omni rom booted but reboot and then all over again.have many roms but have problems with our device(mine is sm-j415fn). anyway i try do same in PIE update but cant boot any rom (gsi). why ? dont know? thats why i downgrade in oreo and can flash and boot almost all gsi on list. did they work or not is other story.thank you.
rudi021 said:
sorry but this doesnt work on my side of flashing GSI.OREO base. i try on many gsi who doesnt boot but not help. i boot this PIE gsi (on oreo base): descendant 3.1.1.; Prisma os(still cant find way to get network,no sim detected);Havoc os (works perfectly);Dot os 3.0 (same no sim detect); RR 2019-04-06 very nice rom; AEX by enes sastim 2019-05-09(also very nice rom);Viper os (but is Official and dont let use it)(mean boot but no sim works);Zirconium aosp (work well but seems like android kitkat seems so simple(i dont like it);and many more with same problems,they booted but not have network work, or like omni rom booted but reboot and then all over again.have many roms but have problems with our device(mine is sm-j415fn). anyway i try do same in PIE update but cant boot any rom (gsi). why ? dont know? thats why i downgrade in oreo and can flash and boot almost all gsi on list. did they work or not is other story.thank you.
Click to expand...
Click to collapse
me i have not a network on aex extended but on dot os i have
Envoyé de mon Phh-Treble vanilla en utilisant Tapatalk
kapmino269 said:
Guys , sorry I found error in my script and I fixed it I tested it on AEX official , I will test it in others then post it .
@rudi021
---------- Post added at 09:15 AM ---------- Previous post was at 08:29 AM ----------
v2 : https://www.androidfilehost.com/?fid=6006931924117930007
tested : work with rom logo bootloop 100%
Click to expand...
Click to collapse
thank you bro. i definetly try this on pie upgrade and inform you.thank you for your hard work. i am on vacation and when i come home i will try this.thank you and greetings from Croatia.:good:
also i stop build gsi roms for j4+ because my pc is old so i need little upgrade of same( RAM(have only 4 gb,need for pie at least 8 gb ,my motherboard can have 32 gb,), my processor is i3 but i will upgrade on i5 and after that i will continue work on it. but now i am on vacation with my wife and children and when i come hom ei will continue to work it.thank you once more.
So, since there is not alot of development going on for our device, i thought we could maybe work together to get something done four our Mi Note 10.
Android Q (10) Guide
1) Flash Miui 12 beta
2) Flash Latest OrangeFox Recovery
3) Format Data
4) Wipe dalvik and cache
5) Reboot to Recovery
6) Flash an GSI of your choice (Arm64-AB)
7)Resize the system partition
8) Optional: Flash Opengapps
9) Optional: Flash Magisk
Restart system
Enjoy
(Big thanks to deathhall)
For me Havoc Q works really well, also face unlock works with Havoc
Havoc specific bugs: SMS doesnt work with 4G, Gcam works only with the main lens and frontfacing lens
Havoc 3.6
Android Pie (9) Guide
How to flash these on the Mi Note 10?
1) Flash Orange Fox TWRP
2) Factory reset in TWRP / format Data!
4) Fastboot: fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
5) Download the ARM64-AB version of your desired rom
6) Flash AB system.img of your GSI in TWRP
7) Flash magisk
8) reboot
That worked for me with both GSIs
Lineage OS 16.0
HAVOC OS 2.9
Whats not working?
- Fingerprint (Needs custom overlay)
- Automatic Brightness (Needs custom overlay)
- Camera works fine, but Video seems a little bit weird
- NFC, but this can be fixed with a magisk module
NFC FIX
Kind of a fix for automatic brightness
Video fix
If you have weird notification sounds delete the SoundFX folder from /Vendor/lib and /Vendor/lib64
Framework-res.apk (Provided by ChriZer)
Great work my friend, hopefully these will be the stepping stones to development and we can get the ball rolling on more in the future!
Sent from my MI CC9 Pro using Tapatalk
- flash an Xiaomi OTA update like 1.0.1.0 (around 2,5gb)
Link please.
ztocker said:
- flash an Xiaomi OTA update like 1.0.1.0 (around 2,5gb)
Link please.
Click to expand...
Click to collapse
Try with 11.0.12
Couldnt get either to actually boot, couldn't get any OTA's to actually flash with OrangeFox.
I flashed:
miui_TUCANAEEAGlobal_V11.0.11.0.PFDEUXM_9fa3ae20ce_9.0
then tried to flash:
miui-blockota-tucana_eea_global-V11.0.11.0.PFDEUXM-V11.0.12.0.PFDEUXM-ecf4ee46b2-9.0
and just get an error.
I tried following your steps written in the OP, but the BlockOTA fails to flash. Or if I just use a fresh install and Format data, and try to install the GSI's it rewrites the system to system_root and magisk won't install and it just bootloops.
deathhall said:
Couldnt get either to actually boot, couldn't get any OTA's to actually flash with OrangeFox.
I flashed:
miui_TUCANAEEAGlobal_V11.0.11.0.PFDEUXM_9fa3ae20ce_9.0
then tried to flash:
miui-blockota-tucana_eea_global-V11.0.11.0.PFDEUXM-V11.0.12.0.PFDEUXM-ecf4ee46b2-9.0
and just get an error.
I tried following your steps written in the OP, but the BlockOTA fails to flash. Or if I just use a fresh install and Format data, and try to install the GSI's it rewrites the system to system_root and magisk won't install and it just bootloops.
Click to expand...
Click to collapse
Maybe try 11.0.1. since its alot bigger than 12 and 11
Android 11 GSi is out can you give it a shot?
Status?
Is anybody using the LOS GSI as a daily driver?
If there is just the small amount of bugs like in the description, it might be fine for now. At least for me.
Or are there other small bugs 'not worth mentioning' ?
In another parallel thread 'Will there be a custom ROM?', two heros decided to work on our phone... I wish them the best!
Hi all, I have spent a good few weeks testing almost all Android 10 (Q) GSIs for tucana (our device). My findings are relatively positive and are as follows:
I got Pixel Experience as well as EvolutionX from @expressLukeGSI to boot and both seem to work with minimal bugs... The main bug I found was an audio bug commoly associated with GSIs; the audio sounds as if the device is underwater. A simple fix to this bug was flashing audiofix for GSIs.
I also got OxygenOS to boot from @erfanGSI as well as others but these had major bugs (e.g. device reboots automatically, immediately after connecting to WIFI).
Other Android Q GSIs that booted include LineageOS, CAOS, AOSP, Descendant as well as Havoc (from GSI page - Android Q Section - on Github). With regards to LineageOS, once rooted with magisk it will NOT boot.
Under Display Fingerprint does NOT work on any GSIs currently and Face Unlock only works on specific GSIs.
If you'd like more info on the GSIs I have tested or would like me to test further please don't hesitate to contact me via private message, I'll be glad to help wherever possible.
LDP12 said:
Hi all, I have spent a good few weeks testing almost all Android 10 (Q) GSIs for tucana (our device). My findings are relatively positive and are as follows:
I got Pixel Experience as well as EvolutionX from @expressLukeGSI to boot and both seem to work with minimal bugs... The main bug I found was an audio bug commoly associated with GSIs; the audio sounds as if the device is underwater. A simple fix to this bug was flashing audiofix for GSIs.
I also got OxygenOS to boot from @erfanGSI as well as others but these had major bugs (e.g. device reboots automatically, immediately after connecting to WIFI).
Other Android Q GSIs that booted include CAOS, AOSP, Descendant as well as Havoc (from GSI page - Android Q Section - on Github).
If you'd like more info on the GSIs I have tested or would like me to test further please don't hesitate to contact me via private message, I'll be glad to help wherever possible.
Click to expand...
Click to collapse
No fingerprint right?
Fingerprint on GSIs
iSonik said:
No fingerprint right?
Click to expand...
Click to collapse
Unfortunately no fingerprint on any GSIs currently
LDP12 said:
Unfortunately no fingerprint on any GSIs currently
Click to expand...
Click to collapse
Thats not a minor bug imo
iSonik said:
Thats not a minor bug imo
Click to expand...
Click to collapse
Completely opinion based; I can live without it.
I have edited my original post to include this.
LDP12 said:
Completely opinion based; I can live without it.
I have edited my original post to include this.
Click to expand...
Click to collapse
Yeah thats why i said "imo". But that also means no autobrightness
iSonik said:
Yeah thats why i said "imo". But that also means no autobrightness
Click to expand...
Click to collapse
Sorry, I never saw the "imo" part of your reply.
That is correct, once again this is minor for me but maybe not for some. Although I can confirm that battery drain is significantly decreased when using GSIs. Even without the auto brightness battery life is much better.
I am currently using/testing the Evolution X GSI from ExpressLukeGSI.
LDP12 said:
Sorry, I never saw the "imo" part of your reply.
That is correct, once again this is minor for me but maybe not for some. Although I can confirm that battery drain is significantly decreased when using GSIs. Even without the auto brightness battery life is much better.
I am currently using/testing the Evolution X GSI from ExpressLukeGSI.
Click to expand...
Click to collapse
Yeah batterylife on GSIs is insane, maybe ill try one again. But the missing fingerprint and faceunlock bother me quite alot
BTW are you using Q GSIs?
iSonik said:
Yeah batterylife on GSIs is insane, maybe ill try one again. But the missing fingerprint and faceunlock bother me quite alot
BTW are you using Q GSIs?
Click to expand...
Click to collapse
Yes, I am using Q GSIs
Interesting, i cant get GSIs to boot, did you do something different?
Are you wiping Dalvik, System, Data and Cache, and then flashing the preferred GSI?
If the above method is not working, search "Download the MIUI 12 Closed Beta for Xiaomi and Redmi devices XDA" on google, download MIUI 12 beta for tucana/Mi Note 10 (our device) and flash it in TWRP. Then perform a wipe as usual and flash preferred GSI.
iSonik said:
Interesting, i cant get GSIs to boot, did you do something different?
Click to expand...
Click to collapse
I was on MIUI 20.6.11 -MiRoom when I flashed the Bliss GSI, my exact steps where:
Flash Latest OrangeFox Recovery
Formata Data
Format dalvik and cache
Reboot to Recovery
Flash GSI -Arm64-AB or BvN depending on the owner
Go to Data in the manage partition menu and resize partition
Flash Opengapps, I used 10.0 Pico
Restart system
Admittedly, I flashed the GSI but not the gapps first, just to see if it would boot, which it did. then I formatted only cache and dalvik, then resized and flashed Gapps. and it booted and took me right into the setup from the notification that came up when it booted.
Requirements:
installed:
1.twrp3.2.3-z2x
ZUK edge Treble - Google Drive
drive.google.com
2.Z2151_CN_OPEN_USER_Q00030.1_O_ZUI_4.0.282_ST_181017_qpst
Installation:
1.TWRP---wipe---Format Data(Type yes).
2.Flash partition.zip
3. Wipe the Dalvik/ART cache, cache, system, data .
4. Flash RR-O-v6.1.0-20180728-z2x-Unofficial
ZUK edge Treble - Google Drive
drive.google.com
5.Wipe factory Reset(Some GSI may have to be wipe: system, cache, data, dalvik/cache。)
6. Flash android10、11 GSI arm64 Aonly image
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
7. Wipe factory Reset
8. Reboot and enjoy!
9.Optional Flash Certification_Patch_V2,[R]TeamDrivers_OpenGL-Vulkan_SD820-SD821_v4.5(For android10 GSI only!)
ZUK edge Treble - Google Drive
drive.google.com
Android 11 GSI notification ringtone fix:
On TWRP, mount system, advanced setup file management.
Copy the file“mediaextractor” and paste it into:
system/system_ext/apex/com.android.media/etc/seccomp_policy/mediaextractor.policy
Android 11 GSI Flash Screen Fix:
Flash GSI img files and boot the system, back to TWRP flash "adreno-5xx-v313-rev23-treble"。
Android 11 GSI Aonly Magisk Solutions:
1- Install magisk apk
2- Go to twrp & flash MAGISKA11-a-only
3- Flash Magisk-v22-canary-phh
4- Reboot and enjoy
DotOS-arm64-a-only and AncientOS-R-Society-v5.2-ARM64_A-only-Iron-20210227-vanilla can't boot,The following zip files can help boot and fix bugs.after flash GSI img to the system partition,flash this zip,wipe factory reset,reboot.
Thanks:
Art Chen
@hamido @kukuruyuk_pagi，@iam，@eternityson,@Ashle
AOSP V300.l
CAOS V300l avZ
Very interesting thread.
For gsi system a only as flyme emui coloros is same steps?
TarAntonio said:
Very interesting thread.
For gsi system a only as flyme emui coloros is same steps?
Click to expand...
Click to collapse
you device SD/vndk/Aonly or ab?go to learn GSI:https://github.com/phhusson/treble_experimentations/wiki/Frequently-asked-questions-(FAQ)
crDROID 6.14 work well.thanks:Braialindo, Guilherme2041
Tims Fong said:
you device SD/vndk/Aonly or ab?go to learn GSI:https://github.com/phhusson/treble_experimentations/wiki/Frequently-asked-questions-(FAQ)
Click to expand...
Click to collapse
Hey are you talking about zuk edge? What learn . I flashed an havoc pie gsi
someone has the link to download ?? ----> Z2151_CN_OPEN_USER_Q00030.1_O_ZUI_4.0.282_ST_181017_qpst
I get an error on twrp trying to flash RR-O-v6.1.0-20180728-z2x-Unofficial. It reads E2001: Unable to mount Vendor. Any help ?
Meminsim said:
I get an error on twrp trying to flash RR-O-v6.1.0-20180728-z2x-Unofficial. It reads E2001: Unable to mount Vendor. Any help ?
Click to expand...
Click to collapse
do you use this TWRP" recovery_vendor "?
Yes I do. Twrp 3.2.1
Meminsim said:
Yes I do. Twrp 3.2.1
Click to expand...
Click to collapse
try reboot to recovery,flash RR6.1.0 again.
I'm just telling you that on AOSP 11.0 V300.m still no have a notification ringtone, and you can't install a display driver, otherwise you can't boot.
Havoc-OS-v4.1-20210208-arm64-aonly-Official.img
CAOS V300m
lineage-18.1-20210212-UNOFFICIAL-treble_arm64_avS.img
I've almost tested all of gsis
same problem for most of them is that camera is too slow and too laggy. u may w8 for 10 secs until camera operates.
most of gsis have problem with fingerprint sensor.
is there any solution for these problems?
Agostino251 said:
I've almost tested all of gsis
same problem for most of them is that camera is too slow and too laggy. u may w8 for 10 secs until camera operates.
most of gsis have problem with fingerprint sensor.
is there any solution for these problems?
Click to expand...
Click to collapse
Yes, these are the characteristics of GSI, 1. No automatic brightness. 2. It takes 10 seconds for the front and rear cameras to switch. 3. Fingerprint unlock is not sensitive. Overlay is required to resolve these issues：https://github.com/phhusson/treble_experimentations/wiki/How-to-create-an-overlay?
Please come to this group and you will learn more: https://t.me/phhtreble
caos-v300m-210219-arm64-avZ.img + open_gapps-arm64-11.0-nano-20210130-TEST + adreno-5xx-v313-rev23-treble，Notification ringtones have been fixed, are already very stable, and can be used daily.thanks： eremitein
lir-v300m-210221-arm64-avZ.img + open_gapps-arm64-11.0-nano-20210130-TEST
thanks： eremitein