Somebody tried to flash the 10 plus with Newflasher ? Does it works with this device or not ?
I tried Newflasher with I3213 (single SIM) and I4293 (dual SIM).
This flasher worked well.
Masa. T said:
I tried Newflasher with I3213 (single SIM) and I4293 (dual SIM).
This flasher worked well.
Click to expand...
Click to collapse
Everything flashed successfully and the phone booted fine ?
I`m asking because i see that there`s another file structure in the FTF, and i`m not sure that Newflasher work propertly with it, but if you say that flashed fine, i`ll flash it too when i get the phone Wanna change region from Asian to my native.
+1 what Masa said. I did a full flash with it (I3223). It worked fine.
I flashed UK firmware on HK device.
The device is working perfectly.
I flashed the phone with newflasher right now, everything`s ok
Many thanks to all who answered!
DennisDD78 said:
I flashed the phone with newflasher right now, everything`s ok
Many thanks to all who answered!
Click to expand...
Click to collapse
Is there a region I could flash that would include Wi-Fi calling? I'm on Verizon in USA.....
droidnew said:
Is there a region I could flash that would include Wi-Fi calling? I'm on Verizon in USA.....
Click to expand...
Click to collapse
From the box my device was on HK firmware, and there was a WIFI calling. Now it`s flashed to Russian firmware, and there`s also WIFI calling included.
Sorry, this is not for xperia 10, but can i use for xperia 10 I4193?
DennisDD78 said:
From the box my device was on HK firmware, and there was a WIFI calling. Now it`s flashed to Russian firmware, and there`s also WIFI calling included.
Click to expand...
Click to collapse
hi, people!!! please, help!!! Dual sim dont work!!! The network appears and disappears. I bought a phone in Russia. presented to my sister in Belarus. And stumbled upon this problem. Need detailed instructions for flashing the radio module, or used an older version maybe, please!
Related
Please help me..i have gone through your (Pitzmans) thread for flashing and rooting xperia z2 L50u..i have done all the steps and can now connect to mobile network and make calls.....the only problem now is that i cant switch on my WIFI. Wifi worked perfectly before i flashed the radio drivers ...please help
i have solved the problem with the help of ghostofcain
i flashed the generic uk rom
then i flashed the l50u radio drivers
Flash back stock ROM? , I'm puzzled why you flashed new radio unless you where having issues though.
ghostofcain said:
Flash back stock ROM? , I'm puzzled why you flashed new radio unless you where having issues though.
Click to expand...
Click to collapse
I have flashed back the stock rom and everything works fine now..the reason i flashed a generic uk rom(unbranded) to the phone was because i bought the phone from china and it didn't come installed with google play services.i tried installing but it always failed with an error message...i have now rooted the phone and installed google play services as a system app but i cant open playstore nor can i log in my google account it keeps crashing once i open the app...Thanks
Try flashing an unbranded ftf (using flashtool) and exclude the radio (I'm sure there is a tick box for that) and see if that works
ghostofcain said:
Try flashing an unbranded ftf (using flashtool) and exclude the radio (I'm sure there is a tick box for that) and see if that works
Click to expand...
Click to collapse
i have the same issue, but on my case sim does not work, i have tried Pitzman's method, it worked for like 1 day and then the no service shows up again
on what you have said exclude the radio, did you mean the baseband on flashtool?
Thanks
aminu241 said:
Please help me..i have gone through your (Pitzmans) thread for flashing and rooting xperia z2 L50u..i have done all the steps and can now connect to mobile network and make calls.....the only problem now is that i cant switch on my WIFI. Wifi worked perfectly before i flashed the radio drivers ...please help
i have solved the problem with the help of ghostofcain
i flashed the generic uk rom
then i flashed the l50u radio drivers
Click to expand...
Click to collapse
I want to know which files are radio drivers? or where I can get them.
thank you
cnteddybear said:
I want to know which files are radio drivers? or where I can get them.
thank you
Click to expand...
Click to collapse
Baseband is radio driver and you can get them from stock ftf.
darknessmc said:
Baseband is radio driver and you can get them from stock ftf.
Click to expand...
Click to collapse
Thanks for your reply. are they in the modem files in /system/etc/firmware?
cnteddybear said:
Thanks for your reply. are they in the modem files in /system/etc/firmware?
Click to expand...
Click to collapse
Yes, but I don't know their names.
I'm on stock MM, .291, rooted , lb, xposed, twrp recovery, got TA backup, flashing the baseband only of D6503 1.6GB ftf (through flashtool) did not work but, the flashing was successful.. I downloaded this ( http://forum.xda-developers.com/xperia-z2/general/sony-z2-d6503-prerooted-customized-au-t3432625 ) rom, d6502 patch, bootloop fix zips.. Need help for running Jio 4G in my D6502.. Please Please someone instruct me..
The hardware is missing not the software, so flashing the above mentioned zips or any zip for that matter won't help.
Sorry to tell you that VoLTE doesn't work on Xperia Z2 Indian version i.e D6502. I also wanted to use jio on my phone. But it is something hardware related so it can't be fixed by flashing . :/ Sorry brother.
No, Z2 supports Jio
Dr. Death said:
Sorry to tell you that VoLTE doesn't work on Xperia Z2 Indian version i.e D6502. I also wanted to use jio on my phone. But it is something hardware related so it can't be fixed by flashing . :/ Sorry brother.
Click to expand...
Click to collapse
Some of my friends are using Jio in their D6502, C6602 also... but IDK why can't I... I'm So... tensed...
I don't want VoLTE, just want 4G network
hamzxoxo said:
The hardware is missing not the software, so flashing the above mentioned zips or any zip for that matter won't help.
Click to expand...
Click to collapse
I Know D6502 won't support VoLTE, but it surely supports LTE 4G, some of my frnds are using jio in their Z(C6602), Z2(D6502), can u please help me... ?
prawindj said:
I Know D6502 won't support VoLTE, but it surely supports LTE 4G, some of my frnds are using jio in their Z(C6602), Z2(D6502), can u please help me... ?
Click to expand...
Click to collapse
@akshay2shah bro can you help ?
prawindj said:
I Know D6502 won't support VoLTE, but it surely supports LTE 4G, some of my frnds are using jio in their Z(C6602), Z2(D6502), can u please help me... ?
Click to expand...
Click to collapse
Are you sure that they're having D6502? Because as far as i know it is near to impossible unless you change the hardware
Yeah
hamzxoxo said:
Are you sure that they're having D6502? Because as far as i know it is near to impossible unless you change the hardware
Click to expand...
Click to collapse
Yes , They instructed me to flash stock based ROm, then flash baseband of D6503, That's it.. Itried this in 5.1.1 and 6.0.1 also.. but didn't succeed...
prawindj said:
Yes , They instructed me to flash stock based ROm, then flash baseband of D6503, That's it.. Itried this in 5.1.1 and 6.0.1 also.. but didn't succeed...
Click to expand...
Click to collapse
After flashing D6503 baseband, does the phone detect the sim card?
No
hamzxoxo said:
After flashing D6503 baseband, does the phone detect the sim card?
Click to expand...
Click to collapse
No, its not even detecting my own 3G sim, , the only way that I can use my sim is to go again into aroma installer and select D6502 this time... help me plzzz....
prawindj said:
No, its not even detecting my own 3G sim, , the only way that I can use my sim is to go again into aroma installer and select D6502 this time... help me plzzz....
Click to expand...
Click to collapse
Don't you get it now? The D6503 baseband won't work on D6502 because it doesn't have the hardware. So there you have it, there's no you can use 4G on a 3G only* phone
Oops
hamzxoxo said:
Don't you get it now? The D6503 baseband won't work on D6502 because it doesn't have the hardware. So there you have it, there's no you can use 4G on a 3G only* phone
Click to expand...
Click to collapse
So, is there any other way to jio in my D6502, I'm ready for everything, they're still using jio in their D6502...
prawindj said:
So, is there any other way to jio in my D6502, I'm ready for everything, they're still using jio in their D6502...
Click to expand...
Click to collapse
Who are using jio in D6502 ? Ask them how did they do it ?
prawindj said:
So, is there any other way to jio in my D6502, I'm ready for everything, they're still using jio in their D6502...
Click to expand...
Click to collapse
Idk how they did it, maybe ask them to do it for you
Dr. Death said:
Who are using jio in D6502 ? Ask them how did they do it ?
Click to expand...
Click to collapse
I'm just following their instructions , but still no success !
prawindj said:
I'm just following their instructions , but still no success !
Click to expand...
Click to collapse
It ain't possible bro. :/ The hardware of D6502 doesn't supports 4g. I don't get it how they are using it in their phones.
OMG
Dr. Death said:
It ain't possible bro. :/ The hardware of D6502 doesn't supports 4g. I don't get it how they are using it in their phones.
Click to expand...
Click to collapse
Damn, I trie d to install the Purex ROM again , so , I selected "clean to install new rom " in recovery, I couldnt find the zip file in my phone so, I wanted to DL through my Laptop, Its currently downloading, So I turned off my phone, Now the Dowanloading is completed and, I can't Boot my phone , not even recovery, I'm literally crying.... !!!
What to do now, can't even boot...
prawindj said:
Damn, I trie d to install the Purex ROM again , so , I selected "clean to install new rom " in recovery, I couldnt find the zip file in my phone so, I wanted to DL through my Laptop, Its currently downloading, So I turned off my phone, Now the Dowanloading is completed and, I can't Boot my phone , not even recovery, I'm literally crying.... !!!
Click to expand...
Click to collapse
Flash stock ftf using flashtool. Then root again and then pure x rom
Dr. Death said:
Flash stock ftf using flashtool. Then root again and then pure x rom
Click to expand...
Click to collapse
Can I flash this file, "D6503 cutomised 5.1.1 .264 ftf" directly through flashtools? or this one, "D6503 6.0.1 .291 ftf" ?
Now, flashing "D6503 .264 5.1.1 customised ftf"
prawindj said:
Can I flash this file, "D6503 cutomised 5.1.1 .264 ftf" directly through flashtools? or this one, "D6503 6.0.1 .291 ftf" ?
Now, flashing "D6503 .264 5.1.1 customised ftf"
Click to expand...
Click to collapse
Yes you can.
Well I saw the update in France [XEF] yesterday and wanted it right then! So I searched all the forums and finally found a good way and now my unlocked Galaxy Note 8[NON Rooted] is running Oreo with INS CSC.
Made this guide so that people can find this method easily.
Keep in mind that flashing your device is always risky and I DO NOT take any responsibility if you mess up the procedure and damage your device.
Method:
>
Download the latest BRB2 Firmware from here https://updato.com/firmware-archive-select-model?record=67BFD0E620FF11E89F15FA163EE8F90B OR https://www.sammobile.com/firmwares/galaxy-note8/SM-N950F/XEF/
Flash it using Odin[3.12.3] [ MAKE SURE THAT ONLY AUTO REBOOT & F.RESET TIME options are checked in the 'Options' tab of ODIN]
After flashing is complete reboot into system and run through the setup, after that remove your SIM & SDCARD and open the phone app. Dial *#272*YOUR IMEI NUMBER# to open the list of CSCs. [to get your IMEI dial *#06#]
Select the XEF CSC, it will ask to reboot and reset the device, let it do the same.
After the device reboots then check for software updates manually and you'll get OREO.
After installing oreo put your sim and sdcard back in, it will tell you to reset the device, DO IT as its necessary to restore your original CSC.
That's it
Now you have OREO, Non rooted and stock oreo.
Screenshots Below
Credits: THE INTERNET and the AMAZING people that use it.
The Code dont work for me.
Why?
Hi, anyone tried?
ramoneluis said:
The Code dont work for me.
Why?
Click to expand...
Click to collapse
By the Code do you mean the *#272* one?
Make sure that you're on the latest france XEF BRB2 firmware.
saints5354 said:
Hi, anyone tried?
Click to expand...
Click to collapse
I myself have tried this and worked for me.
Dev Jaskirat said:
By the Code do you mean the *#272* one?
Make sure that you're on the latest france XEF BRB2 firmware.
Click to expand...
Click to collapse
Ok. I will try one more time. Thanks
doesnt work for me
cebulank said:
doesnt work for me
Click to expand...
Click to collapse
Your SIM and SDcard should be out of the device when you enter this code
Try that?
Dev Jaskirat said:
Your SIM and SDcard should be out of the device when you enter this code
Try that?
Click to expand...
Click to collapse
Its all out what ever i do i allwys land ond dbt and the code doesnt work..
cebulank said:
Its all out what ever i do i allwys land ond dbt and the code doesnt work..
Click to expand...
Click to collapse
Are you flashing CSC or HOME_CSC?
I am not sure what is the problem here but it should work...
its just a guess but try to flash CSC file if you were earlier flashing the HOME_CSC or vica versa
Dev Jaskirat said:
Are you flashing CSC or HOME_CSC?
I am not sure what is the problem here but it should work...
its just a guess but try to flash CSC file if you were earlier flashing the HOME_CSC or vica versa
Click to expand...
Click to collapse
i never flashed the home csc only csc
cebulank said:
i never flashed the home csc only csc
Click to expand...
Click to collapse
Then try the HOME_CSC or redownload the firmware from the new link [Added in the OP] I used that one.
OP, do you have the single or dual sim variant?
Mihailol said:
OP, do you have the single or dual sim variant?
Click to expand...
Click to collapse
Dual Sim 64GB variant
The one launched in India
maybe thats it i have the same firmware as yours and single sim no chacnce it allways changes to dbt without sim and even wifi enabled. And the code doesnt work at all nothing happens.
cebulank said:
maybe thats it i have the same firmware as yours and single sim no chacnce it allways changes to dbt without sim and even wifi enabled. And the code doesnt work at all nothing happens.
Click to expand...
Click to collapse
It could be it, I'll wait for a few more users to try it and if it doesn't work then will change the title to DUAL SIM variant only
Dev Jaskirat said:
Dual Sim 64GB variant
The one launched in India
Click to expand...
Click to collapse
Thanks. I have the dual sim variant as well, but the code does not seem to work. I used both IMEI's with no luck. My CSC is BGL/BGL/BGL.
does not work on the UK O2 variant flashing the French firmware
Mihailol said:
Thanks. I have the dual sim variant as well, but the code does not seem to work. I used both IMEI's with no luck. My CSC is BGL/BGL/BGL.
Click to expand...
Click to collapse
It cannot be specific to indian variants only.
Can you please explain your complete process [ firmware flashing etc]?
UK owners the only way to get XEF is with the latest COMB file N950FXXU3ARA2.
Hi can I change firmware on 802SO to global Rom?
Mine is unlock bootloader allowed: yes
I don't think anyone has done that yet.
Realated questions: when changing firmware are you required to unlock bootloader?
TrustAugustus said:
I don't think anyone has done that yet.
Realated questions: when changing firmware are you required to unlock bootloader?
Click to expand...
Click to collapse
I just think someone make custom like global Rom for 802so
I flashed 802SO to J8110 (customized UK rom) yesterday. It works very well.
I have Sov40 xperia 1 japanese,
I flashed to J8110 (customized UK rom) before 3 Month. It works very well , i using New flasher
Without unlock Boothlooder
I flashed from 802SO and it works much better. But I lost osaifu keitai.
maxitsai said:
I flashed 802SO to J8110 (customized UK rom) yesterday. It works very well.
Click to expand...
Click to collapse
can u tell single sim or double sim??
irbazrsxperia said:
can u tell single sim or double sim??
Click to expand...
Click to collapse
single sim. the original 802SO comes with single sim and 64GB.
maxitsai said:
single sim. the original 802SO comes with single sim and 64GB.
Click to expand...
Click to collapse
can u give me link plz of customized UK rom)
I want to hear some reviews of members who did install Android 11 ROM of J8110 to model 802SO (Softbank).
Apart from NFC problem, is there something wrong else?
irbazrsxperia said:
can u tell single sim or double sim??
Click to expand...
Click to collapse
Did you flash Android 11 ROM?
I want to confirm again. What model do you have?
Xmokur said:
Did you flash Android 11 ROM?
I want to confirm again. What model do you have?
Click to expand...
Click to collapse
i'm flashing xperia 1 SOV40 to J8110 customized uk android 11,all app working fine,but camera eror,cant open camera,nfc off
Axeldroid20 said:
i'm flashing xperia 1 SOV40 to J8110 customized uk android 11,all app working fine,but camera eror,cant open camera,nfc off
Click to expand...
Click to collapse
Yes. I confirmed!. I've tried to install Australia firmware. The camera worked.
Xmokur said:
Yes. I confirmed!. I've tried to install Australia firmware. The camera worked.
Click to expand...
Click to collapse
can you tell me what tools you use?newflasher or flashtool?and if you use new flasher all files you flashed or file.ta your delete?
Xmokur said:
Yes. I confirmed!. I've tried to install Australia firmware. The camera worked.
Click to expand...
Click to collapse
whats is australia firmware,mobilkom AT or vodafone?
Mobilkom AT
Xmokur said:
Mobilkom AT
Click to expand...
Click to collapse
ok thanks
and can you tell me what tools you use?newflasher or flashtool?if you use newflasher all files you flashed or some file like file.ta and persist.sin you delete?
Axeldroid20 said:
can you tell me what tools you use?newflasher or flashtool?and if you use new flasher all files you flashed or file.ta your delete?
Click to expand...
Click to collapse
I use newflasher. I do not remember right whether I flash South Africa or Australia firmware becauseI tried to download a bunch of firmware. I did not delete file.TA.
You can tried to flash them one by one.
***
Hello
Version China XQ-BC72 can flash rom HK international version ?
Thanks!
Hello there
Hi there,I think it could.Usually it can flash in same modle.I conform its all BC72 in HK and TW.
Where can we flash the HK firmware?
chungdae said:
Where can we flash the HK firmware?
Click to expand...
Click to collapse
Its not listed yet in HK.Some say to be in the middle of July.It will be there just before it be on the market.
zzxd828 said:
Its not listed yet in HK.Some say to be in the middle of July.It will be there just before it be on the market.
Click to expand...
Click to collapse
Ah OK thank you
With 1ii, it's possible to flash HK, TW or EU ROMs but you will not get mobile signal. I tried all kind of ROMs but had to come back to stock Chinese ROM at the end.
It's lucky that in chinese ROM we still have Google Service and all you need is install Play Store APK, unlike Huawei or some others. Bloatwares can also be uninstalled easily.
I'm having 1iii XQ-BC72 now and pretty sure it will be the same. But need to wait for Xperifirm to release firmwares of other market first then I will try and come back here.
tatdatnt said:
With 1ii, it's possible to flash HK, TW or EU ROMs but you will not get mobile signal. I tried all kind of ROMs but had to come back to stock Chinese ROM at the end.
It's lucky that in chinese ROM we still have Google Service and all you need is install Play Store APK, unlike Huawei or some others. Bloatwares can also be uninstalled easily.
I'm having 1iii XQ-BC72 now and pretty sure it will be the same. But need to wait for Xperifirm to release firmwares of other market first then I will try and come back here.
Click to expand...
Click to collapse
Your post really help me. My friend ask me about 1iii china local without Google app and service is it possible to run on TW HK Global rom. Thanks and wait your next test on 1iii China local version.
tatdatnt said:
With 1ii, it's possible to flash HK, TW or EU ROMs but you will not get mobile signal. I tried all kind of ROMs but had to come back to stock Chinese ROM at the end.
It's lucky that in chinese ROM we still have Google Service and all you need is install Play Store APK, unlike Huawei or some others. Bloatwares can also be uninstalled easily.
I'm having 1iii XQ-BC72 now and pretty sure it will be the same. But need to wait for Xperifirm to release firmwares of other market first then I will try and come back here.
Click to expand...
Click to collapse
You couldn't get any signal back in 1 II because the CN model is XQ-AT72 while HK and TW are XQ-AT52. That's a different model with different baseband configuration.
But this time with 1 III, All three regions are sharing the same model XQ-BC72. So cross-region flashing shouldn't be a problem.
I have successfully flashed TW ROM on XQ-BC72 CN version using newflasher. Everything works fine
jsshenyuxi said:
I have successfully flashed TW ROM on XQ-BC72 CN version using newflasher. Everything works fine
Click to expand...
Click to collapse
Plz guide
dungnghien said:
Plz guide
Click to expand...
Click to collapse
Newflasher what version
jsshenyuxi said:
I have successfully flashed TW ROM on XQ-BC72 CN version using newflasher. Everything works fine
Click to expand...
Click to collapse
where did you download this rom?
dungnghien said:
where did you download this rom?
Click to expand...
Click to collapse
I downloaded this rom by XperiFirm.Then using newflasher v48 to flash
jsshenyuxi said:
I downloaded this rom by XperiFirm.Then using newflasher v48 to flash
Click to expand...
Click to collapse
specific instructions please
acatoan said:
Your post really help me. My friend ask me about 1iii china local without Google app and service is it possible to run on TW HK Global rom. Thanks and wait your next test on 1iii China local version.
Click to expand...
Click to collapse
Hi. Just have time to test with TW firmware and it worked, full Google services and no bloat-wares.
Nimda01 said:
You couldn't get any signal back in 1 II because the CN model is XQ-AT72 while HK and TW are XQ-AT52. That's a different model with different baseband configuration.
But this time with 1 III, All three regions are sharing the same model XQ-BC72. So cross-region flashing shouldn't be a problem.
Click to expand...
Click to collapse
Yes it seemed so.
jsshenyuxi said:
I have successfully flashed TW ROM on XQ-BC72 CN version using newflasher. Everything works fine
Click to expand...
Click to collapse
Confirmed.
tatdatnt said:
Hi. Just have time to test with TW firmware and it worked, full Google services and no bloat-wares.
Yes it seemed so.
Confirmed.
Click to expand...
Click to collapse
Im flash tw firmware and bootloop, plz help
dungnghien said:
Reflash with Original firmware and repair with Companion, After this reflash with Firmware TW
Click to expand...
Click to collapse
can you make a step by step guide for flashing it?
So, somebody flashed TW FW ok, somebody failed, what is the reason ?
Those who flased their device OK, PLEASE, tell us in detail how you did it ?