Related
Treble Flashing Guide For All nokia treble enabled phones
Note -1. Before Doing These Steps Your device bootloader should be unlocked. otherwise you may brick your device.
2.Copy img files according to GSI Android Version
Example - iam using Nokia 6.1 Plus & i want to flash Pixel-ex-periance-9
in my phone using GSI
METHOD 1 - VIA CMD
1. copy vendor.img & boot.img form Android 9 stock ota.zip or OST File
2. download gsi from aosp , lineage , pixel experiance etc but choose ab Arm 64
3. now keep 3 files in one folder
4. open cmd in that folder
5. now turn of your mobile and go to download mode
6. now type fastboot devices
7. type fastboot -w
8. type fastboot flash vendor vendor.img
9. type fastboot flash system PixelExperienceP-arm64-ab.img
10. type fastboot flash boot boot.img
11. type fastboot -w
12. fastboot reboot
METHOD 2 - VIA TWRP
1. copy Those 3 img files to your directory internal or external
2. wipe everything except your internal & sd
3. select install img
4. select vendor.img and select vendorimage in partition box swipe to flash
5. next select PixelExperienceP-arm64-ab.img and select systemimage in partition box swipe to flash
6. next select boot.img and select boot in partition box swipe to flash
7. reboot system
Download stock Vendor.img & boot.img files from the below links
Android 9 https://drive.google.com/open?id=1WC9iGS8QnnnBmG4KKL3sEcqlR8LceBUt
Android 8.1.0 https://drive.google.com/open?id=1yY3QvUCYKDXlfn9bREObS2XwCScnU-EN
Please Hit Thanks Button If You Understand My Guide. Hope Every One Will Boot GSI Successfully In Your Phones. Keep Going...!!!
Thank you
can you post 6.1plus vendor IMG and boot IMG here please
Or links
pawankonjarla said:
can you post 6.1plus vendor IMG and boot IMG here please
Or links
Click to expand...
Click to collapse
links updated now
BootLoader
Should the bootloader be unlocked to flash via CMD??
Thanks:good:
nikash07 said:
Should the bootloader be unlocked to flash via CMD??
Thanks:good:
Click to expand...
Click to collapse
yes Need to unlock your bootloader before flashing GSI Or else you may Brick your device
Raghu varma said:
yes Need to unlock your bootloader before flashing GSI Or else you may Brick your device
Click to expand...
Click to collapse
How to unlock bootloader, especially after August Security patch coz HMD doesn't allow to unlock bootloader of 6.1 plus anymore
nikash07 said:
How to unlock bootloader, especially after August Security patch coz HMD doesn't allow to unlock bootloader of 6.1 plus anymore
Click to expand...
Click to collapse
Just Go to Nearest Nokia Care Point And tell them Iam not comfort with Android Pie i want to revert back to oreo june Security Patch So Just Inform Them i mean tell them to flash DRG-229D File . This file will directly goes down to oreo june security Patch And give the mobile to them they will flash in 2minutes And request Unlock Key Just by in searching Google.
Raghu varma said:
Just Go to Nearest Nokia Care Point And tell them Iam not comfort with Android Pie i want to revert back to oreo june Security Patch So Just Inform Them i mean tell them to flash DRG-229D File . This file will directly goes down to oreo june security Patch And give the mobile to them they will flash in 2minutes And request Unlock Key Just by in searching Google.
Click to expand...
Click to collapse
I don't think Nokia is going to accept this and flash Oreo just like that.
nikash07 said:
I don't think Nokia is going to accept this and flash Oreo just like that.
Click to expand...
Click to collapse
Bro I updated to pie and went to care point and said some complaints about pie.they finally downgraded my phone . For example tell them Iam not comfort with pie so just flash DRG-229D File using ost. This file belongs to Oreo june security patch .
I have removed the Telegram link in your OP. Posting Telegram links or other ways of promoting social media is not allowed on XDA.
Forum Rules said:
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
Click to expand...
Click to collapse
Raghu varma said:
Treble Flashing Guide For All nokia treble enabled phones
Note -1. Before Doing These Steps Your device bootloader should be unlocked. otherwise you may brick your device.
2.Copy img files according to GSI Android Version
Example - iam using Nokia 6.1 Plus & i want to flash Pixel-ex-periance-9
in my phone using GSI
METHOD 1 - VIA CMD
1. copy vendor.img & boot.img form Android 9 stock ota.zip or OST File
2. download gsi from aosp , lineage , pixel experiance etc but choose ab Arm 64
3. now keep 3 files in one folder
4. open cmd in that folder
5. now turn of your mobile and go to download mode
6. now type fastboot devices
7. type fastboot -w
8. type fastboot flash vendor vendor.img
9. type fastboot flash system PixelExperienceP-arm64-ab.img
10. type fastboot flash boot boot.img
11. type fastboot -w
12. fastboot reboot
METHOD 2 - VIA TWRP
1. copy Those 3 img files to your directory internal or external
2. wipe everything except your internal & sd
3. select install img
4. select vendor.img and select vendorimage in partition box swipe to flash
5. next select PixelExperienceP-arm64-ab.img and select systemimage in partition box swipe to flash
6. next select boot.img and select boot in partition box swipe to flash
7. reboot system
Download stock Vendor.img & boot.img files from the below links
Android 9 https://drive.google.com/open?id=1WC9iGS8QnnnBmG4KKL3sEcqlR8LceBUt
Android 8.1.0 https://drive.google.com/open?id=1yY3QvUCYKDXlfn9bREObS2XwCScnU-EN
My Teligram Group Link All Are invited And Feel Free to Ask your Questions MOD EDIT: LINKS REMOVED
My Teligram Channel For the Further Information
Please Hit Thanks Button If You Understand My Guide. Hope Every One Will Boot GSI Successfully In Your Phones. Keep Going...!!!
Thank you
Click to expand...
Click to collapse
the Doctor said:
I have removed the Telegram link in your OP. Posting Telegram links or other ways of promoting social media is not allowed on XDA.
Click to expand...
Click to collapse
thanks for the information. I won't repeat this again
thank you very much
Can we unlock now?
And
How to flash stock rom
I installed AEX gsi, but without TWRP I can't install gapps. Anyone know how to install gapps another way?
paul89rulez said:
thank you very much
Click to expand...
Click to collapse
Welcome
bbcastro said:
I installed AEX gsi, but without TWRP I can't install gapps. Anyone know how to install gapps another way?
Click to expand...
Click to collapse
Well now twrp thread is up in nokia 6.1 kenel and recovery development section check it out
earlier treble gsi's had issues with Nokia phones Sim cards not being detected - has this been resolved, specifically relating to TA-1103?
So should I download From "A" only roms or "A/AB" roms?
Nokia X6 with Custom Oreo ROM - How to load stock Android Pie 6.1 plus image
Hi,
I bought a Nokia X6 in September 2018 (6GB/64GB) and would like to install the Stock Nokia 6.1 Plus Android 9 image.
I see my phone is rooted and it shows the message "Your device has loaded a different operating system." everytime I start it and I have to use Magisk to hide several banking applications.
The phone works great and I knew it was going to be relased in Europe eventually, but I am scared to brick it by loading the Android 9 Image.
I already tried attempting the update through OTA but the zip file is ignored. Nothing happens.
I am new to this forum so I don't know if my question has been asked by someone else.
Can you please help me?
Thank you!
Image size is bigger than target device..
I am using nokia 6.1 plus .. its support project treble , and its ab device..
When i try to flash a gsi rom bigger than 2.5 gb its also eror that image size is bigger than target device ...:crying:
Many popular gsi like oos, one, hydrogen, color os file size over than 2.5 gb .. so always shows this eror..
Any solution for this eror..??
---------- Post added at 04:03 PM ---------- Previous post was at 03:28 PM ----------
I am using nokia 6.1 plus .. its support project treble , and its ab device..
When i try to flash a gsi rom bigger than 2.5 gb its also eror that image size is bigger than target device ...:crying:
Many popular gsi like oos, one, hydrogen, color os file size over than 2.5 gb .. so always shows this eror..
Any solution for this eror..??
INSTALL STOCK PIE USING BELOW INSTRUCTIONS
Note -1. Before Doing These Steps Your device bootloader should be unlocked. otherwise you may brick your device.
2. Install Adb drivers on windows if you are using windows or if you are using linux install adb drivers in linux
3. This firmware can't be Install Using NOST or OSTLA , because This firmware is A home Brew File pulled From DRG345B Ota File
4. So i Included bat script for windows and shell Script For linux Just use that file To Flash the firmware
5. you people will receive OTA updates monthly When Nokia Rolled out Security Patch updates
6. Simply I Can say this is equal to Stock Rom
INSTALLATION PROCEDURE
1. Download my Stock Pie firmware
2. Extract it in One folder
3. make sure that you have been already installed Adb drivers in your respective OS
4. Now turn of your phone , connect Your phone to pc Using Type C usb Cable
5. now wait until your phone show charging animation and now press volume down & power key for 5 seconds at a time
6. now you people will be in download mode
7. click on flash_all.bat(windows) , flash_all.sh (linux) in extracted folder
8. Now sit back and relax for 15 minutes it will do the job and autometically your phone reboots and it will boot up
9. congratulations now you are on stock pie DRG-345B December security Patch 2018
DOWNLOAD STOCK PIE FROM BELOW LINK
NAME - DRG-345B-0-00WW-B01-PIE-DEC2018
Download Link
Please Hit Thanks Button If You Understand My Guide. Keep Going...!!!
Thank you
hey ...so had a custom ROM installed, then flashed nit with the instructions u gave... everything works fine... but i cant seem to find "update phone"....
xoro091 said:
hey ...so had a custom ROM installed, then flashed nit with the instructions u gave... everything works fine... but i cant seem to find "update phone"....
Click to expand...
Click to collapse
just fatory reset
xoro091 said:
hey ...so had a custom ROM installed, then flashed nit with the instructions u gave... everything works fine... but i cant seem to find "update phone"....
Click to expand...
Click to collapse
You will receive ota updates may be issue is with your phone just do factory reset or click on software update to check
link to firmware down
Ah, So You've rooted your 6.1 Plus/X6 but don't know how to Install stock or having troubles with it? I'm here to help!
*All of the instructions and procedures below requires an unlocked bootloader. If you do not have an unlocked bootloader, Please refrain from asking about it here.
*Not having an unlocked bootloader and following this will definitely brick your phone. You have been warned.
Installing Stock ROM - Method 1A(Nost) --
1. Get NOST from here - NOST
2. NOST ONLY SUPPORT OREO FIRMWARE, USE OST LA FOR PIE(Not sharing cause its a patched app, Search on Google and get it from TechMesto)
3. Download unpacked oreo firmware, You can get it from - Here
4. Extract the zip on your PC
5. Put your phone in bootloader mode, Power off - Press Volume Down+Power Button.
6. Now connect it to your PC
7. Open NOST, Select the .mlf file from the folder where you extracted the Firmware
8. Now select, Normal download and Erase User data option.
9. Now click on next and wait for NOST to flash the phone. (It takes 258 seconds or 2.3 - 2.5 minutes on my laptop)
Installing Stock ROM - Method 1B(OST LA) --
Same as NOST, It has the same UI.
Except You might have to change some values in the .mlf file.
An appropriate guide for the same - Here
Installing Stock ROM - Method 2(Hikary's Generic Flashing Script) --
I recommend this method more than NOST and OST LA.
1. Get Hikary's script from - Here
2. Get unpacked Firmware from - Here
3. Extract the Firmware
4. Put the .exe file you got from Github into the folder where you Extracted the firmware
5. Run the script
6. Follow instructions on screen
7. Profit!
Thanks alot to member - Hikary for this easy to use scipt!
You've installed Stock, Now let's add some magisk to it !
*Please disable Automatic System Updates through developer options to make taking OTA .zips easier.
Installing Magisk - Method 1A(Fastboot method) -
You will need Google's ADB drivers, Which you can get - Here/
1. Extract ADB to a Folder
2. Get Magisk patched boot images from - Here Don't worry, Boot images for Nokia 7 Plus will work on DRG(6.1 Plus/X6) and PL2(6.1)
3. Open adb(Type cmd in the address bar of the folder where you extracted adb)
4. Put your device on Download mode
5. type the command
Code:
fastboot boot 'nameofbootimage'.img
6. Now your phone will boot
7. Install Latest Magisk Manger from - [https://www.github.com/topjohnwu/magisk/releases]Here[/url]
8. Open Magisk Manger, You will see Magisk is installed, But there will also be an Install Button next to it. Tap on Install.
9. Let Magisk Install and re-boot the phone
10. Viola Magisk is now permenantly available
Installing Magisk - Method 1B(TWRP method) -
You will need Google's ADB drivers, Which you can get - Here/
1. Get the latest TWRP for 6.1 Plus
2. Get the Latest Magisk Installer from - [https://www.github.com/topjohnwu/magisk/releases]Here[/url]
3. Put the .zip file to your Internal Storage/SD Card
4. Open adb and pass the command
Code:
fastboot boot "nameofrecoveryfile.img"
5. Now TWRP will open on your phone
6. Install Magisk through TWRP
7. Wipe Dalvik
8. Reboot
9. Profit
Now you've got magisk. Follow the next post to see how to take an OTA update with Magisk Installed.
Nokia 6.1 Plus is an Android One certified device. Nokia is no slouch either when it comes to issuing updates. Learn how to take OTA without losing root.
1. Turn of Auto System updates through Developer options
2. Open Magisk Manager
3. Restore Stock Images but don't reboot.
4. Download and install, Let both the steps finish i.e applying update and apps, but don't reboot.
5. Go to magisk manager and select install to inactive slot option
6. Re-boot device.
7. You've not lost root, But have root access.
Done
CarbonGTR said:
Nokia 6.1 Plus is an Android One certified device. Nokia is no slouch either when it comes to issuing updates. Learn how to take OTA without losing root.
1. Turn of Auto System updates through Developer options
2. Open Magisk Manager
3. Restore Stock Images but don't reboot.
4. Download and install, Let both the steps finish i.e applying update and apps, but don't reboot.
5. Go to magisk manager and select install to inactive slot option
6. Re-boot device.
7. You've not lost root, But have root access.
Done
Click to expand...
Click to collapse
I don't see any option to restore stock images or install to inactive slot in Magisk. Am I missing something?
Hymix said:
I don't see any option to restore stock images or install to inactive slot in Magisk. Am I missing something?
Click to expand...
Click to collapse
Open Magisk Manager, Tap on Uninstall. You will see 2 options, Complete Uninstall and restore stock images.
*Nevar tap on the complete uninstall option, It will throw your phone into bootloop
To install to inactive slot, Tap on install, You will get 2 options, Release Notes and Install. Tap on Install again and select install to inactive slot, Reboot from within Magisk Manager.
The simplest way I've found to install Stock Rom is just using adb sideload.
Boot into TWRP and wipe as you would with any custom rom.
Go to advanced and adb sideload.
Send the adb sideload command from your computer with the relevant zip file.
Doesn't require any additional softward like NOST or OST....
Hymix said:
The simplest way I've found to install Stock Rom is just using adb sideload.
Boot into TWRP and wipe as you would with any custom rom.
Go to advanced and adb sideload.
Send the adb sideload command from your computer with the relevant zip file.
Doesn't require any additional softward like NOST or OST....
Click to expand...
Click to collapse
But does it also install the bootloader and stock recovery back? If yes then I'll add it to the post above.
CarbonGTR said:
But does it also install the bootloader and stock recovery back? If yes then I'll add it to the post above.
Click to expand...
Click to collapse
That's a good question. I've just been using stock and hadn't considered it. How would one check that?
Sent from my Nokia 6.1 Plus using Tapatalk
Bluebriz said:
That's a good question. I've just been using stock and hadn't considered it. How would one check that?
Sent from my Nokia 6.1 Plus using Tapatalk
Click to expand...
Click to collapse
It's easy. Get an OTA .zip file, Re-Boot to recovery and flash it. Or Use the ADB Sideload method.
Most likely installing the OTA would fail if the device is rooted because, Magisk will patch the boot.img.
Then I'll need to wait for another update, the September one, right? Because I installed it with ADB and have Magisk installed so I don't really want to mess with it until I have to.
Sent from my Nokia 6.1 Plus using Tapatalk
Bluebriz said:
Then I'll need to wait for another update, the September one, right? Because I installed it with ADB and have Magisk installed so I don't really want to mess with it until I have to.
Click to expand...
Click to collapse
I just took an OTA with Magisk installed it went fine. (September patch)
OK, then it doesn't seem to work. Trying to follow the steps, the system update gives an installation error. I'm guessing that somewhere along the road I've messed something up, so it seems stock rom and Magisk isn't an option for me.
Hymix said:
OK, then it doesn't seem to work. Trying to follow the steps, the system update gives an installation error. I'm guessing that somewhere along the road I've messed something up, so it seems stock rom and Magisk isn't an option for me.
Click to expand...
Click to collapse
Restore images before you do anything, If installation fails keep trying again. It happens to me to.
CarbonGTR said:
Restore images before you do anything, If installation fails keep trying again. It happens to me to.
Click to expand...
Click to collapse
Really? I did the restore via Magisk and that seemed fine, but then the update part didn't work. It downloaded then gave the error so I quit and started again with a fresh installation, minus Magisk.
Sent from my Nokia 6.1 Plus using Tapatalk
Have you guys modified the system/vendor partition in any way? If you did, Then it will obviously fail.
@Bluebriz and @Hymix I agree. It's the september security patch causing the installation issue.
It fails for me no matter what, Unless I completely un-root. But this method works perfectly fine on the August update.
Lets see for the October patch.
Okay, I can specifically narrow this down to way the September patch. The september patch requires the August security patch as a precondition to install. And that's where something funky is happening.
Guys a quick update. October update has been released but it also fails to install. This time I've managed to find the cause, Apparently some service that needs to be used for the update is being blocked/used by Magisk. (I could be wrong here)
The error code according to the recovery is 20(kDownloadStateInitializationError)
Is there any update to this issue?
Tried removing Magisk, didn't help.
Yesterday I got November security update ..iam using magisk...so it is showing installation problem...I tried in recovery and ADB method both didn't work.. finally I ended in bootloop ...so I again installed stock ROM...any solution is there without resetting each time how to install security updates..coz each time my data balance was wasted??
After a couple of months of deep research I have managed to find a solution to unlock bootloader and root our SMAO15F device.
1st step: If your on android 10 it's possible to unlock bootloader even if our device has that option by default.
Fortunately with the newly released of official android 11 we are able to do so all you gotta do is you have to jump to android 11 if you're still on android Q then proceed to the unlocking method.
2nd step: after bootloader unlock download this .tar file (patched boot image for android 11 samsung sma015f).
Final process: Go to download mode, open latest odin and import the attached file with the AP button, phone will automatically restart after the process or restart it manually if not,
voila our samsung a01 is now rooted without twrp. Now we just have to wait for someone to make a custom twrp for our device or wait for official twrp or kindly please let me know if there is.
Credits: to that russian guide for the patched boot file for android11 (sma015f)
Cool bro!, but, how i'm unlock the bootloader for A01?
ROOT WITH MAGISK 23 WORKING 100% ON ANDROID 11 JUST UPGRADE UNLOCK BOOTLOADER AND FOLLOW THE INSTALLATION GUIDE https://topjohnwu.github.io/Magisk/install.html
Kaik Ricardo said:
Cool bro!, but, how i'm unlock the bootloader for A01?
Click to expand...
Click to collapse
Vol+ and Vol - and plug the usb cable then long press vol+
Hello,
Finally, I can unlock the bootloader, flash twrp and root my Samsung Galaxy A01 (a01q) (SM-A015M).
All I need is just update to Android 11 and then I can unlock the bootloader and flash the magisk patched boot.img together the patched vbmeta.img.
I can flash TWRP using the image file "TWRP_3.5.2_A015F.img" sent by @tariqa
How To Root Samsung A01 (a015f/DS)
Hello, I want to ask how to root samsung galaxy a01 (a015f) , i want to instal f.lux for better blue light filter, Thanks!
forum.xda-developers.com
Thank you very much
1. Unlock your bootloader enter in download mode Vol+ + Vol- + USB conected to pc (Keep in mind that by doing this you will lose your files, it is advisable to make a backup of your photos, music, etc.)
2. Once you start your cell phone install magisk manager, Choosing the boot.img file of your rom into the app (Tip: Only!!! If your model is SM-A015M Android 11 I leave you my own modified boot.img to flash:
File on MEGA
mega.nz
Otherwise, you can download the firmware (3.79 gb) and extract the boot.img from the firmware of your model SM-A015 M / F ... Android 10, Android 11... etc. And No need for pc
https://samfrew.com/model/SM-A015M/
3. The image will begin to flash
4. When it restarts you will have Root on the cell phone!
------------------------------------------------------------------------------------------------------------------------------------------------
Extra: If you need the custom recovery I give you the link with my TWRP which is installed through the Odin program on a PC (this step does not delete your files)
File on MEGA
mega.nz
Keep in mind that to install TWRP you must deactivate the DM-VERITY & FORCEENCRYPT DISABLER I leave it in a link:
Zackptg5 - Android
zackptg5.com
This is a module that can be installed via magisk, which is necessary to decrypt the system ... so once TWRP is installed, it is advisable to uninstall it via Magisk to avoid R / W errors
Marti_Fajardo said:
After a couple of months of deep research I have managed to find a solution to unlock bootloader and root our SMAO15F device.
1st step: If your on android 10 it's possible to unlock bootloader even if our device has that option by default.
Fortunately with the newly released of official android 11 we are able to do so all you gotta do is you have to jump to android 11 if you're still on android Q then proceed to the unlocking method.
2nd step: after bootloader unlock download this .tar file (patched boot image for android 11 samsung sma015f).
Final process: Go to download mode, open latest odin and import the attached file with the AP button, phone will automatically restart after the process or restart it manually if not,
voila our samsung a01 is now rooted without twrp. Now we just have to wait for someone to make a custom twrp for our device or wait for official twrp or kindly please let me know if there is.
Credits: to that russian guide for the patched boot file for android11 (sma015f)
Click to expand...
Click to collapse
after flashing the AP, the phone won't boot and says can't load android system.
edit: i patched my own AP with Magisk and it worked.
So i managed to upgrade my samsung a01m/ds to android 11 & i had unlocked the bootloader. Afterwards i had use the magisk rooting process, then flashed a boot.img that i had extracted from firmware (if needed i will upload) then the phone restated and took like 7 minutes to start, having said that i setup my device but upon doing so i noticed i was not able to use wifi but i had mobile data , managed to get in and install root checker pro and i had root but there was root( will leave an image ) but i didn't enjoy the fact that the wifi was not working, my hotspot wasn't working. i never managed to install TWRP becuase i was tampering a little more and trip my knox. it's been like 2 months since it trip and the OEM UNLOCKING in developer options is yet to be visible so i can unlock the oem and start a fesh.
Marti_Fajardo said:
After a couple of months of deep research I have managed to find a solution to unlock bootloader and root our SMAO15F device.
1st step: If your on android 10 it's possible to unlock bootloader even if our device has that option by default.
Fortunately with the newly released of official android 11 we are able to do so all you gotta do is you have to jump to android 11 if you're still on android Q then proceed to the unlocking method.
2nd step: after bootloader unlock download this .tar file (patched boot image for android 11 samsung sma015f).
Final process: Go to download mode, open latest odin and import the attached file with the AP button, phone will automatically restart after the process or restart it manually if not,
voila our samsung a01 is now rooted without twrp. Now we just have to wait for someone to make a custom twrp for our device or wait for official twrp or kindly please let me know if there is.
Credits: to that russian guide for the patched boot file for android11 (sma015f)
Click to expand...
Click to collapse
I managed to root my phone using this method but after I rooted, my wifi was stuck at turning on. I would then restore it to its stock firmware to have the wifi back and it did, but then I rooted again and wifi got stuck again. How do I fix this problem?
Johnmarr said:
I managed to root my phone using this method but after I rooted, my wifi was stuck at turning on. I would then restore it to its stock firmware to have the wifi back and it did, but then I rooted again and wifi got stuck again. How do I fix this problem?
Click to expand...
Click to collapse
Did you try to enable or disable MAC randomizing?
how
VD171 said:
Did you try to enable or disable MAC randomizing?
Click to expand...
Click to collapse
How do I enable or disable mac randomizing?
The bootloader cannot be unlocked in RealmeUI 2.0 on Realme 7 (RMX2151 INDIA) as of now (09-August-2021). The only way to install any ROM/Recovery is to downgrade to the previous version and unlocking the bootloader. The procedure is as follows: (Tested on Realme RMX2151)
Download Android 10 (RealmeUI 1.0 based firmware from here: https://c.realme.com/in/post-details/1415972132185292800)
To be on the Safer Side go to developer options (Tap on build number 5-10 times) and enable USB Debugging.
Shutdown the phone and enter into recovery by holding the power and volume down key for 5-10 seconds) DATA WILL BE WIPED AFTER THIS
Tap on English > Install from Storage > From Phone Storage and select the package.
In around 2-3 minutes Android 10 based stock ROM will be flashed.
Again go to developer options and enable both USB Debugging and OEM Unlocking.
Download in-depth apk and install it on the phone. XDA Forum
Open InDepth APK, Start Applying. Wait for the "review successful".
use the guide in step 7 to boot into fastboot and unlock the bootloader.
Steps to unlock bootloader: Open CMD in the pc to run ADB and fastboot. Type: 1. adb reboot bootloader 2. fastboot devices 3. fastboot flashing unlock 4. fastboot reboot
In case the phone is stuck after fastboot flashing unlock, just restart the recovery by pressing power and volume down together and restart the phone.
Check bootloader status in the developer options.
Reference Video:
Forum: XDA
You can install any recovery. Just follow the same procedure and change the recovery file.
Press Power and Volume down button together as soon as you type fastboot reboot to open the recovery.
Recovery will get reset if you restart the phone. In this case, use Step 13 to reinstall the recovery.
Once in recovery, you can connect to the PC to copy any ROM and install it. It is recommended to use an SD Card.
I am creating this post because none of the available posts in XDA is telling about bootloader unlock in RealmeUI 2.0. I have unlocked the bootloader and flashed a customer ROM on my Realme 7 using this same procedure.
Let me know in case of any doubts.
what recovery you're using? some of them doesn't work on rui 2.0, some others aren't stable enough (unofficial build). also, did you update to rui2.0 again after all of this step?? i managed to get bootloader unlocked on rui2.0 by using mtkclient, downgrade is unnecessary. by using mtkclient you wouldn't get fastboot mode since in depth testing apk also verify to unlock fastboot mode. simply read mtkclient readme file if you wish to unlock.. or I'll make one here
immns said:
what recovery you're using? some of them doesn't work on rui 2.0, some others aren't stable enough (unofficial build). also, did you update to rui2.0 again after all of this step?? i managed to get bootloader unlocked on rui2.0 by using mtkclient, downgrade is unnecessary. by using mtkclient you wouldn't get fastboot mode since in depth testing apk also verify to unlock fastboot mode. simply read mtkclient readme file if you wish to unlock.. or I'll make one here
Click to expand...
Click to collapse
twrp (3.5.2 https://twrp.me/realme/realme6.html ) stops working as soon as you update to rui 2.
Anuj Dadhwal said:
twrp (3.5.2 https://twrp.me/realme/realme6.html ) stops working as soon as you update to rui 2.
Click to expand...
Click to collapse
yea. and it makes my phone bootloop'd
immns said:
yea. and it makes my phone bootloop'd
Click to expand...
Click to collapse
I think TWRP for rui 2 based rom is different. Every time I try flashing twrp it resets the whole bootloader (sort of)
Any update about twrp custom recovery for realme ui 2.0
Mark Yngell Kate said:
Any update about twrp custom recovery for realme ui 2.0
Click to expand...
Click to collapse
Post in thread 'Android11 TWRP 3.5.2 for Realme 7 on rui 2.0 .' https://forum.xda-developers.com/t/...for-realme-7-on-rui-2-0.4316289/post-86337941