I've successfully flashed twrp but the touch screen has no response. Here are the steps I followed:-
Updated to global stable rom 10.3.1 PDTMIXM
Unlocked after 15 days - ok
downloaded recovery-TWRP-3.2.3-0330-XIAOMI8LITE-CN-wzsx150.img from https://drive.google.com/drive/folders/1780TJvn-ZHPBtgDdNjrN8i9YRlqPy38v
...and put a copy in fastboot folder on laptop + internal and external storage to cover all bases
fastboot flash recovery recovery-TWRP-3.2.3-0330-XIAOMI8LITE-CN-wzsx150.img (actually renamed it to twrp.img but putting full filename here for clarity)
then
fastboot boot recovery-TWRP-3.2.3-0330-XIAOMI8LITE-CN-wzsx150.img
then
try to flash twrp image from recovery
...but upon fastboot booting into recovery the recovery boots but there is no response to touchscreen when the recovery home screen appears. Buttons still work.
Using the power+volume up results in the same.
I can boot into system just fine.
Update: I used this twrp. Touchscreen works but unable to decrypt or mount data. https://androidfilehost.com/?fid=11410963190603912304
Related
followed this to unlock bootloader - all went fine...
http://forum.xda-developers.com/showthread.php?t=2447319
and this to flash recovery, all went well - except the instructions omitted to include the requirement to flash the img file using "fastboot flash boot ....img" (you cant "run" and img file!)
http://www.ibtimes.co.uk/articles/5...tra-clockworkmod-twrp-recovery-bootloader.htm
Switched off, back on again , holding volume up and voila the clockword recovery was available.
But when I rebooted and held the volume up again, no recovery mod, it seemed to be overwritten.
Had to flash the recovery image again to get into recovery, then lost it again on next normal boot??
Any ideas?
Hello, I tried to install the latest paranoid android but now have a system that only freezes on boot or turns on into fastboot mode. The following is what I have done:
unlock bootloader
(system 23.1.A.1.28)
root using exploit for 5.0.2 with super su
installed recovery apk which installed some NDR tool as well to switch between recoveries
some phills touch ui was the default and teamwin only worked if selected from the NDR app and rebooted
booted into teamwin, did a full wipe
mtp wasn't working to copy ROM so did a reboot, also tried to sideload before reboot but the stupid twrp said the device was 'leo' instead of D6503 or whatever so it didn't want to work
phone stuck so tried to use fastboot to flash system pa-sirrius-rom.zip
also tried to flash system backup from twrp but it's a win.000 and win.001 file and not sure how to join them to get a working system.img??
why won't recovery boot and how do i get a working system again. how do i convert a twrp backup to one that fastboot recognises and isn't split in 2?
If you have an unlocked bootloader just download a kernel with recovery built in. Flash the kernel 'fastboot flash boot boot.img'. Your phones not booting anyway so it really doesn't matter what kernel, as long as it has built in recovery. Boot into TWRP and recovery your backup.
Edit:
I'd you have an unlocked bootloader, don't wast your time with apks that install recovery. I'm my experience they're always hacky. Just get a recovery for fota partition or a boot image with one built in.
Sent from my D6503 using Tapatalk
Thanks for the reply.
I finally found a boot.img with TWRP built in (from the cyanogen project). I also found out that I had to flash it (fastboot boot command doesn't seem to work).
I can boot the recovery just fine but it will not mount any partitions and the only thing listed in the wipe menu is "Dalavik Cache".
I have attached a screenshot of the TWRP log.
It won't let me post links because my experience is low.
i.imgur dot com cXBv1Y8.png
Edit:
I can format the system partition and even mount it from the command line, it just doesn't appear in the TWRP UI.
In the mount menu, it has a checkbox which I cannot uncheck that says "Only mount system read-only".
Edit:
Booted from the cyanogen recovery image which had its own adb sideload which I used to load cyanogen and now it's working!
Cross-post from here
I have a frustrating issue.
After booting into fastboot mode, I type the following commands where recovery.img is the TWRP mido image. I also have lazyflasher and SuperSU on my SD card, but onto that later...
I type :
Code:
fastboot flash recovery recovery.img
fastboot boot recovery.img
The phone boots into TWRP perfectly. I then flash the lazyflasher zip file. However when I try to boot back into recovery, the Mi logo briefly appears, then nothing... black screen.
So at the moment, I don't care about what is on internal storage. I went to wipe-->format data, then rebooted straight into bootloader to try and flash TWRP again. However this also gives me a black screen when I try and boot into recovery after installing Lazyflasher. I tried again, however I also flashed SuperSU immediately after lazyflasher. Rebooting into recovery from TWRP gives me a black screen again.
Should I perhaps try to flash a custom kernel? I am lost for other solutions.
TLDR: TWRP unsuccessful after: fastboot flash recovery, then fastboot boot recovery.img, then flashing lazyflasher, followed by flashing SuperSU, then choosing Reboot-->Recovery.
bigpavmate said:
Cross-post from here
I have a frustrating issue.
After booting into fastboot mode, I type the following commands where recovery.img is the TWRP mido image. I also have lazyflasher and SuperSU on my SD card, but onto that later...
I type :
Code:
fastboot flash recovery recovery.img
fastboot boot recovery.img
The phone boots into TWRP perfectly. I then flash the lazyflasher zip file. However when I try to boot back into recovery, the Mi logo briefly appears, then nothing... black screen.
So at the moment, I don't care about what is on internal storage. I went to wipe-->format data, then rebooted straight into bootloader to try and flash TWRP again. However this also gives me a black screen when I try and boot into recovery after installing Lazyflasher. I tried again, however I also flashed SuperSU immediately after lazyflasher. Rebooting into recovery from TWRP gives me a black screen again.
Should I perhaps try to flash a custom kernel? I am lost for other solutions.
TLDR: TWRP unsuccessful after: fastboot flash recovery, then fastboot boot recovery.img, then flashing lazyflasher, followed by flashing SuperSU, then choosing Reboot-->Recovery.
Click to expand...
Click to collapse
Also, once just flash lazyflasher.zip /super su from twrp > next reboot into system from twrp! Do not choose reboot to recovery for the first time. Boot to system..
Okay guys, I have found the solution, although I would still like to know WHY this happened!
I used fastboot + Xiaomi Flash Tool to flash the latest stable ROM. I then enabled USB Debugging, and did all the same steps which resulted in being able to boot into recovery normally! I didn't flash lazyflasher this time because I flashed SuperSU instead, apparently it patches the dm-verity thing too. This was a suggestion from this post
I was running into issues with my phone where it wasn't booting, then I flashed a new rom and it only booted into TWRP so I decided to delete my recovery and flash the stock image using ADB. I deleted my recovery, flashed the stock image and then did fastboot reboot. This is where the problem began, it is now stuck in a boot loop and I am unable to get into recovery or fastboot via power and volume buttons. Anyone got any ideas?
Hello I'm stuck at fastboot loop with my Mi A3 after flashing TWRP
Here is what I did:
1. unlocked bootloader
2. downloaded TWRP from here: dl. twrp. me/ laurel_sprout/twrp-3.3.1-0-laurel_sprout.img.html (cant post links, sorry)
3. installed it with fastboot flash boot twrp-3.3.1-0-laurel_sprout.img
After that the reboot is always goes into fastboot
I found the advice to change the partition - it was B and I set it to A and it could load the stock recovery, so I tried to flash TWRP again and it went to Fastboot loop again, on both partitions. No I don't know what to do.
command 'fastboot devices' - shows the device.
but I cannot boot into recovery, I tried holding power and volume up buttons many times, it always boots into Fastboot (screen with bunny and robot)
Please help!
Vsider said:
Hello I'm stuck at fastboot loop with my Mi A3 after flashing TWRP
Here is what I did:
1. unlocked bootloader
2. downloaded TWRP from here: dl. twrp. me/ laurel_sprout/twrp-3.3.1-0-laurel_sprout.img.html (cant post links, sorry)
3. installed it with fastboot flash boot twrp-3.3.1-0-laurel_sprout.img
After that the reboot is always goes into fastboot
I found the advice to change the partition - it was B and I set it to A and it could load the stock recovery, so I tried to flash TWRP again and it went to Fastboot loop again, on both partitions. No I don't know what to do.
command 'fastboot devices' - shows the device.
but I cannot boot into recovery, I tried holding power and volume up buttons many times, it always boots into Fastboot (screen with bunny and robot)
Please help!
Click to expand...
Click to collapse
Flash the boot.img of your current firmware version in twrp to both slots and flash twrp installer.zip afterwards then reboot. Now you will be able to boot as normal and have twrp installed also
Vsider said:
Hello I'm stuck at fastboot loop with my Mi A3 after flashing TWRP
Here is what I did:
1. unlocked bootloader
2. downloaded TWRP from here: dl. twrp. me/ laurel_sprout/twrp-3.3.1-0-laurel_sprout.img.html (cant post links, sorry)
3. installed it with fastboot flash boot twrp-3.3.1-0-laurel_sprout.img
After that the reboot is always goes into fastboot
I found the advice to change the partition - it was B and I set it to A and it could load the stock recovery, so I tried to flash TWRP again and it went to Fastboot loop again, on both partitions. No I don't know what to do.
command 'fastboot devices' - shows the device.
but I cannot boot into recovery, I tried holding power and volume up buttons many times, it always boots into Fastboot (screen with bunny and robot)
Please help!
Click to expand...
Click to collapse
Don't use twrp
It'll break userdata partition
Use shrp recovery
For Android 9
https://sourceforge.net/projects/mi...RP_P-v2.2-laurel_sprout-official.img/download
For Android 10
https://sourceforge.net/projects/mi...HR_Q-v2.2-laurel_sprout-official.img/download
Shrp installer Flashable zip after flashing ROM
https://sourceforge.net/projects/mi...ller-v2.2-laurel_sprout-official.zip/download
Rajendran Rasa said:
Don't use twrp
It'll break userdata partition
Use shrp recovery
For Android 9
https://sourceforge.net/projects/mi...RP_P-v2.2-laurel_sprout-official.img/download
For Android 10
https://sourceforge.net/projects/mi...HR_Q-v2.2-laurel_sprout-official.img/download
Shrp installer Flashable zip after flashing ROM
https://sourceforge.net/projects/mi...ller-v2.2-laurel_sprout-official.zip/download
Click to expand...
Click to collapse
TWRP breaks down? ? Man!! Everyone using it.
All the youtubers.
There is a stable twrp for a3