Hi did anyone successfully flash of the gsi ROMs not the Google ones but the ones in this thread
https://forum.xda-developers.com/pr...vice-development/pie-erfan-gsi-ports-t3906486
Working so far:
Havoc OS( bugs auto brightness)
Oxygen OS( power button bug app )
been trying to flash his ports to no avail... I hope someone knows how
I was able to boot the miui gsi but that is the only one so far
cidxtc said:
I was able to boot the miui gsi but that is the only one so far
Click to expand...
Click to collapse
I've been looking through different thread I think it is something to do with the vendor I'll take another crack at them on the weekend..
Flash last stock Miui Pie then flash gsi via fastboot and then flash Permissiver zip, our Mi8 lite is an a device.
Stefke93 said:
Flash last stock Miui Pie then flash gsi via fastboot and then flash Permissiver zip, our Mi8 lite is an a device.
Click to expand...
Click to collapse
What
Stefke93 said:
Flash last stock Miui Pie then flash gsi via fastboot and then flash Permissiver zip, our Mi8 lite is an a device.
Click to expand...
Click to collapse
This worked. Managed to flash OxygenOS successfully, but it was unusable. Black screen every after 10-20 seconds from booting.
Nazato said:
This worked. Managed to flash OxygenOS successfully, but it was unusable. Black screen every after 10-20 seconds from booting.
Click to expand...
Click to collapse
Try with developer Miui, did you flashed OxygenOS with fastboot or Twrp?
Stefke93 said:
Try with developer Miui, did you flashed OxygenOS with fastboot or Twrp?
Click to expand...
Click to collapse
I flashed through fastboot with developer eu rom. I couldn't flash other images, like OneUI and Flyme, though. An error always shows during the second phase of flashing.
I have installed many gsi and start very few.
Almost all have a size of more than 3GB and do not install them on the phone or when creating the system the size is not sufficient.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried to boot them from miui and from aosp and the result almost always is the same. It stays in the miui logo.
What we need is a vendor to operate which is what we do not have and it would also be good to increase the size of the system since many GSIs can not even be installed.
I'm sorry for my English.
kenet said:
I have installed many gsi and start very few.
Almost all have a size of more than 3GB and do not install them on the phone or when creating the system the size is not sufficient.
I tried to boot them from miui and from aosp and the result almost always is the same. It stays in the miui logo.
What we need is a vendor to operate which is what we do not have and it would also be good to increase the size of the system since many GSIs can not even be installed.
I'm sorry for my English.
Click to expand...
Click to collapse
I got pixel Q to the boot animation. I used miui vendor, aosp kernel, and fastboot flash. Any other combination and it stays at miui logo.
I tried the most current version of OxygenOS, the installation did not fail the installation, but it did not start, it got stuck in the bootanimation of Oneplus.
cidxtc said:
I got pixel Q to the boot animation. I used miui vendor, aosp kernel, and fastboot flash. Any other combination and it stays at miui logo.
Click to expand...
Click to collapse
Thanks for the info I'll edit the OP with your instructions.. how was your experience with Q
install xiaomi-miui-hellas-XTRV-MI8LITE_9.5.30_v10-9
wipe data, internal storage, cahe and system.
install oxigen OS by twrp
https://mirrors.lolinet.com/firmware/gsi/OxygenOS-Aonly-9-20190602-ErfanGSI.img.7z
Install permisive_v4
https://mega.nz/#!Aosz0QyI!98rEg8jBCf944IIND1_2dZuVUIAF1vRwhWJUGWuPh2M
reboot
The power button does not work and the fix that exists leaves the screen black.
If you want to try it but it did not work for me.
https://mega.nz/#!cpklXChZ!lViIFwpeFQDX3xT69jXCNcyZAdfR_JuohbFQJaikSjc
kenet said:
install xiaomi-miui-hellas-XTRV-MI8LITE_9.5.30_v10-9
wipe data, internal storage, cahe and system.
install oxigen OS by twrp
https://mirrors.lolinet.com/firmware/gsi/OxygenOS-Aonly-9-20190602-ErfanGSI.img.7z
Install permisive_v4
https://mega.nz/#!Aosz0QyI!98rEg8jBCf944IIND1_2dZuVUIAF1vRwhWJUGWuPh2M
reboot
The power button does not work and the fix that exists leaves the screen black.
If you want to try it but it did not work for me.
https://mega.nz/#!cpklXChZ!lViIFwpeFQDX3xT69jXCNcyZAdfR_JuohbFQJaikSjc
Click to expand...
Click to collapse
Yeah fix didn't work here either
ki11aprime said:
Yeah fix didn't work here either
Click to expand...
Click to collapse
If it did not work out for you, it would be a great waste of time on my part.
So no GSI working properly so far?
Oshmar said:
If it did not work out for you, it would be a great waste of time on my part.
So no GSI working properly so far?
Click to expand...
Click to collapse
I believe it's because that port is from the 7 pro. I think once they switch back to op6 base it will work.
I Kno the aosp gsi ports work good
ki11aprime said:
I believe it's because that port is from the 7 pro. I think once they switch back to op6 base it will work.
I Kno the aosp gsi ports work good
Click to expand...
Click to collapse
Also, some other gsi running, other than the oxygen? has any of the Pixel Q been tested?
Oshmar said:
Also, some other gsi running, other than the oxygen? has any of the Pixel Q been tested?
Click to expand...
Click to collapse
Havoc 2.6 booted but didn't really test anything
Found an aroma partition file for redmi2 that I am going to modify for mi 8 lite. Then I will test some of the larger gsi roms. If things work I will post the aroma file for everyone to use. Also only the newest wzsx150 twrp 3.3.0 is compatible with aroma.
cidxtc said:
Havoc 2.6 booted but didn't really test anything
Found an aroma partition file for redmi2 that I am going to modify for mi 8 lite. Then I will test some of the larger gsi roms. If things work I will post the aroma file for everyone to use. Also only the newest wzsx150 twrp 3.3.0 is compatible with aroma.
Click to expand...
Click to collapse
Ok cool
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OFFICIAL DOWNLOADS FOR SUZU:
https://twrp.me/sony/sonyxperiax.htmltwrp-3.x.x_x-x-suzu.img: Official TWRP image
DEVELOPMENT DOWNLOADS FOR SUZU:
Folder: https://sourceforge.net/projects/loire-development/files/twrp-recovery/suzu/twrp-3.x.x_x-x-YYYYMMDD-suzu.zip: Flashable unofficial TWRP to FOTAKerneltwrp-3.x.x_x-x-YYYYMMDD-suzu.img: Unofficial TWRP image
INSTALLATION
MANUALLY TO FOTAFastboot: Adapt the image name and install this way:fastboot flash recovery twrp-3.x.x_x-x-suzu.imgfastboot rebootFROM EXISTING RECOVERY
Enter to the current recovery
Install flashable TWRP
Reboot/Power off
HOW TO ENTER TO THE RECOVERY:
Power off your phone
Press Power and Vol- buttons at the same time until vibration
Wait for TWRP load
Sources:
TWRP device tree: https://github.com/TeamWin/android_device_sony_suzu/tree/android-9.0Kernel: https://github.com/Chippa-a/kernel-copyleft/tree/34.4.A.2.xxxThanks to the TWRP Team!
Backup-Restore function working fine so far, only issue I am seeing is phone is heating up pretty faster than before while backing up in compression mode.
Another minor thing is that earlier when entering recovery mode a purple light used to blink, now its missing.
Just saw this now and I'm really grateful. Big ups to you, man. Great work.
And I was afraid there would be no 3.2.1 for this device;
@Chippa_a makes it possible - intensified thanks! :highfive::good::good:
Thank you!!
I can't flash the zip because twrp does not give access to that part of the storage, weird.
fusk said:
I can't flash the zip because twrp does not give access to that part of the storage, weird.
Click to expand...
Click to collapse
Weird. Try using flash tool to fastboot the image if the flashable zip doesn't work for you.
Updated from TWRP, backup/restore works, no problems so far apart from it needs more than a minute till TWRP GUI appears after boot. Thanks for update.
Do you use the stock kernel? I installed the recovery built by oshmoun in the omnirom thread. It uses the aosp kernel. It starts faster, has a better sdcard naming and can flash oem images. Maybe you could try this kernel.
I use stock kernel (Pexorom 4.5) so this may be the reason for the delay.
I mean the kernel used with the recovery, not the rom kernel.
I_am_Blackford said:
Weird. Try using flash tool to fastboot the image if the flashable zip doesn't work for you.
Click to expand...
Click to collapse
This is what i did. Download img, place file on phone. Download twrp app, pick choose a file, browse to recovery.img, flash. Power off, boot to recovery = win.
Reboot to system, retry installing new update = great success.
mase76 said:
I mean the kernel used with the recovery, not the rom kernel.
Click to expand...
Click to collapse
Sorry, I didn't get it... kernels everywhere.
However, flashing with fastboot leads to the same delayed start. Strange.
privatim said:
Sorry, I didn't get it... kernels everywhere.
However, flashing with fastboot leads to the same delayed start. Strange.
Click to expand...
Click to collapse
I dont know if there is a connection, but i've tested the recovery with OmniROM 7.1.2, where display is not responding. It can be installed, shows 3.2.1, but display remains dead 4 touch.
Give this one a try:
https://forum.xda-developers.com/showpost.php?p=76440401&postcount=333
mase76 said:
Give this one a try:
https://forum.xda-developers.com/showpost.php?p=76440401&postcount=333
Click to expand...
Click to collapse
Same result, whether fastboot or flashtool, display is dead.
Certainly missed ODM LOIRE v12, v11 is installed.
Not really sure is the latest bootloader.
Does restoring a backup change the bootloader as well?
Edit: Solved: the answer is 'yes'.
3.2.1 does not work @7.1.2 restore because of outdated bootloader.
privatim said:
I use stock kernel (Pexorom 4.5) so this may be the reason for the delay.
Click to expand...
Click to collapse
Moved to XGEN ROM and now TWRP starts without delay. :good:
privatim said:
Moved to XGEN ROM and now TWRP starts without delay. :good:
Click to expand...
Click to collapse
What I do not understand, maybe bootloader or encryption, but why is 3.2.1 not backwards compatible on Suzu?
Is Omni 7.1.2 kernel (more I have not tried) or not current boot loader the reason?
Installed on last nougat internal storage 0 help
Inviato dal mio F5121 utilizzando Tapatalk
I'm glad that you finally managed to crack this damn decryption. I felt really bad with my broken promise of delivering the working build. I'm sorry, guys. @Chippa_a congratulations on your hard work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
Statement
Please note that the current state of this project is labeled as "TESTING".
Introduction:
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today.
Instructions:
Pre-installation:
TWRP of course (Download from here)
Magisk can also be used just make sure you flash it after a first successful boot (after passed setup screen)
First time installation:
Backup your data to PC, OTG flash drive
Flash recovery (TWRP) downloaded from above link and boot to recovery
Wipe system, data, cache (maybe format data also), then reboot to TWRP
Copy ROM base and Gapps, then flash them in TWRP
Reboot and enjoy
Update installation:
Boot to TWRP and make a backup
Flash updated ROM base and Gapps (and Magisk if you had this as root method)
Reboot and enjoy
Download:
ROM base: https://sourceforge.net/projects/crdroid/files/beryllium/4.x/
Gapps: https://opengapps.org (I'd suggest nano)
Changelog: To be added
Known isues:
- waiting for feedback
Visit official website @ crDroid.net
crDroid Community Telegram
If you like my work, consider a donation!
XDA:DevDB Information
[ROM] crDroid v4, ROM for the Xiaomi Poco F1
Contributors
gwolfu
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Testing
Created 2018-09-29
Last Updated 2018-09-29
wooow....
Thanking you for this awesome ROM.
Rocking crdroid back to f1
Awesome project, new product but has alot custom Rom
**Reserved**
Boots up.
CR droid boot animation is sick! Loved it.
Of course as title says it's in alpha "testing" so constant system UI crashes upto the point where the screen completely goes black.
One thing I liked about this build was the resolution looks good UI and stuff (got all this just by looking the pre Google setup screen) All the other ROMs I tested has bad resolution and the screen is just not satisfying but not in this rom!
Waiting for stable build. Like.
IR Camera Working?
Force close not able to run for a single minutes:crying:
Tried 2 times but not successful so I go back to lineage os
Unfortunately, the thing happened to other ROMs is also on this ROM. I can't get it to boot after flashing, never got to the setup screen.
WingXBlade said:
Unfortunately, the thing happened to other ROMs is also on this ROM. I can't get it to boot after flashing, never got to the setup screen.
Click to expand...
Click to collapse
idea: format data partition (in TWRP format data -> type yes) then push files and flash again
WingXBlade said:
Unfortunately, the thing happened to other ROMs is also on this ROM. I can't get it to boot after flashing, never got to the setup screen.
Click to expand...
Click to collapse
Just an idea.
We had such a problem with Redmi 4x, after removing the Simtray before first boot the problem was solved.
tried both OP and @ConradB method and @ConradB 's method seems to work.
ajayruchi said:
Force close not able to run for a single minutes:crying:
Click to expand...
Click to collapse
However, I was having the same problem as the comment above
edit: because this ROM is facing fc issues, I've tried with other ROMs and found that it might be my sd card's issue
Nice to see @gwolfu here! I came from S7 forums. Was on crDroid back then. Excited for developments on this ROM.
System UI force close some times, this is a great build but is "alpha" for me, so i go to try RR, PE and AEX, Lineage is the one works fine for me.
iTzPr0o117 said:
System UI force close some times, this is a great build but is "alpha" for me, so i go to try RR, PE and AEX, Lineage is the one works fine for me.
Click to expand...
Click to collapse
Yeah this is testing not even alpha
Waiting for the phone to drop at my place so that I can work around on some bugs
no1noob said:
IR Camera Working?
Click to expand...
Click to collapse
Are you guys dumb or what? No custom rom will be having face ir unlock as none of them have the sources included
Nice to see you here remember you from the g5 Forums ?
tejjoshii said:
Are you guys dumb or what? No custom rom will be having face ir unlock as none of them have the sources included
Click to expand...
Click to collapse
just asking, wow. huge respond for small question, are u always that rude?
no1noob said:
just asking, wow. huge respond for small question, are u always that rude?
Click to expand...
Click to collapse
Nevermind him dude,
To be claim, i am NOT the maintianer.
Today, i want to share a GSI for every use of this phone and try to give everyone the lightest feeling of system to match the weight of this phone. So after hunders of fastboot flash, i succeesfully boot in system after flash, hope everyone can try and if any issue, you can commit this thread or pull a issue to this gsi github.
CLICK Guthub TO DOWNLOAD the "PixelExperience_Plus_arm-ab-11.0-xxxxxxxx-UNOFFICIAL.img.xz"
Three steps to flash:
1,Backup all your data and unzip the file you downloaded from github BTW.
2,If you want to get Magisk, flash Magisk before you flash PE. Without flash new bootimg, Magisk will be permanent.(option)
2,connect to computer and use command <adb reboot fastboot> or press vol- and power to rebbot to the fastboot mode.
3,use command<fastboot flash system xxx.img> to flash PEPlus, <fastboot reboot> to boot into system.
BTW, I am the people who are not native speakers of English, so if i use some wrong word, just let it go if didn't confuse you.
Hope you success.
If feedback of this rom is good, i will base on it to maintain the ROM that only for Mi11 Lite.
Thanks!
Do you mean Mi 11 Lite or Mi 11 Lite 5G??
vanpopel said:
Thanks!
Do you mean Mi 11 Lite or Mi 11 Lite 5G??
Click to expand...
Click to collapse
I flash it on my Mi 11 Lite 5G and it work.
Hi, which version to download, a only or ab??? Is there a way to debloat it before flashing??? Does it wipe data???
Thanks
So i need to download all the available img(or which one spesific) and flash them in fastboot mode and reboot system?
No need anything else right?
After boot i assume i can install magisk 23.0 apk and flash boot img created before throught fastboot right?
Is thats correct?
@ZeroSherd
rayman95 said:
Hi, which version to download, a only or ab??? Is there a way to debloat it before flashing??? Does it wipe data???
Thanks
Click to expand...
Click to collapse
Download ab version.
I don't think we con debolat it before flash
And yes it will wipe all your data.
paatha13 said:
So i need to download all the available img(or which one spesific) and flash them in fastboot mode and reboot system?
No need anything else right?
After boot i assume i can install magisk 23.0 apk and flash boot img created before throught fastboot right?
Is thats correct?
@ZeroSherd
Click to expand...
Click to collapse
You just need to download the ab verison and flash it by the command that i provide. If you need to flash magisk, i sugguest you patch the boot.img before you flash, and after the first boot you go to fastboot again to flash boot_ab that patched boot.img.
ZeroSherd said:
Download ab version.
I don't think we con debolat it before flash
And yes it will wipe all your data.
Click to expand...
Click to collapse
Thanks for your answer...what's the vndklite and is there advantage...I would like the more debloat, or with R/W....
rayman95 said:
Thanks for your answer...what's the vndklite and is there advantage...I would like the more debloat, or with R/W....
Click to expand...
Click to collapse
I did finding a way to get R/W according to patch the ROM without TWRP
ZeroSherd said:
You just need to download the ab verison and flash it by the command that i provide. If you need to flash magisk, i sugguest you patch the boot.img before you flash, and after the first boot you go to fastboot again to flash boot_ab that patched boot.img.
Click to expand...
Click to collapse
Thanks but where can i found boot.img of pe plus?
Can you provide it.
@rayman95 did you flash it ,all ok ,can provide some screenshot of the rom.
paatha13 said:
Thanks but where can i found boot.img of pe plus?
Can you provide it.
@rayman95 did you flash it ,all ok ,can provide some screenshot of the rom.
Click to expand...
Click to collapse
Of course, i will upload it to NETDISK after i finish my OT work that i may need half or A day to done it.
no, not yet....not sure to flash it right now, because I don't want to wipe my phone now....and I don't like gapps...I would love to have a recovery to flash nogoolag ur ULNP only and to do light rom
rayman95 said:
no, not yet....not sure to flash it right now, because I don't want to wipe my phone now....and I don't like gapps...I would love to have a recovery to flash nogoolag ur ULNP only and to do light rom
Click to expand...
Click to collapse
I think you can use ADB command or software to disable those GAPPS.
How do I backup the data if there is no custom recovery available?
In_a_state said:
How do I backup the data if there is no custom recovery available?
Click to expand...
Click to collapse
I highly recommand the TitaniumBackup if you got ROOT, or use MIUI backup which inside the settings.
Screenshot,feedback from the rom??
I would expect more interest for the first custom rom on this device
What's the way to go back to stock if got issues on PE???
Thanks
paatha13 said:
Screenshot,feedback from the rom??
I would expect more interest for the first custom rom on this device
Click to expand...
Click to collapse
Think most people are waiting on a working twrp recovery.
rayman95 said:
What's the way to go back to stock if got issues on PE???
Thanks
Click to expand...
Click to collapse
i didn't try, but i think just need to flash Xiaomi.eu ROM. By the "windows_fastboot_xxx" which in the ROM.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ZeroSherd said:
i didn't try, but i think just need to flash Xiaomi.eu ROM. By the "windows_fastboot_xxx" which in the ROM.View attachment 5323491
Click to expand...
Click to collapse
where do you get this???
here what I have from last EU fastboot rom...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
StatiXOS for Mi 10T Lite / Mi 10i / Redmi Note 9 Pro 5G (gauguin)
What is this?
StatiXOS is a custom ROM based on the Android Open Source Project aiming to be minimal while providing quality of life improvements and up to date security patches.
Known issues
None That I know of! Report us with a logcat if you find any.
Features
Changelog
Screenshots
Download StatiXOS here
Download StatiXOS (Primary)
Download StatiXOS (Mirror)
GApps are included!
Flashing Instructions
This rom is based on Pre-built MIUI Android 11 vendor. So make you sure you are on latest stable MIUI A11 from your region (i.e., Global, CN or IN)
1. Download the Build
2. Make sure you back up all the necessary things
3. Reboot to recovery
4. Flash the ROM
5. Format Data and Reboot
Stay in touch
Our Telegram channel
Source code
GitHub
Gerrit
Android OS version: 11.0.0_r44
Security patch level: Sept 5, 2021
Kernel Source: https://github.com/StatiXOS/android_kernel_xiaomi_gauguin
nerdfail said:
Device Sources:
Kernel Source: https://github.com/StatiXOS/android_kernel_xiaomi_gauguin
Click to expand...
Click to collapse
Welcome to the team
Looks good
does this rom use stock kernel ??
jeuxtype said:
does this rom use stock kernel ??
Click to expand...
Click to collapse
Oss kernel with some improvements
What camera ROM use? Do ROM have voice recording?
tze_vitamin said:
What camera ROM use? Do ROM have voice recording?
Click to expand...
Click to collapse
ships with camera2
by voice recording, do you mean in-call recording?
D this rom is the best I've tried and I've tried almost everything. I know that the comparisons are hateful but at the moment I feel that it is more fluid than any other that I have tried. Great job
SSorry to criticize this but the dock so high up makes my eyes bleed !!! Could you fix this with some configuration option? I love everything else and I want it for everyday use. It goes great
Rafsf said:
SSorry to criticize this but the dock so high up makes my eyes bleed !!! Could you fix this with some configuration option? I love everything else and I want it for everyday use. It goes great
Click to expand...
Click to collapse
That is stock launcher. Can't really do much about that. But I'll see. Until then you can use custom launchers using magisk.
Thank you for grate rom , you can add miui stock camera ?
Ota update support Nerdfail??
elnarutocomy said:
Thank you for grate rom , you can add miui stock camera ?
Click to expand...
Click to collapse
AnxCamera isn't fully working yet. I'll inform you when it is.
saicmf said:
Ota update support Nerdfail??
Click to expand...
Click to collapse
Yes there is OTA support. You'll need orangefox recovery for that.
nerdfail said:
Yes there is OTA support. You'll need orangefox recovery for that.
Click to expand...
Click to collapse
i used twrp must be orangefox recovery ????
saicmf said:
i used twrp must be orangefox recovery ????
Click to expand...
Click to collapse
Use it's recovery, it's better than TWRP, also when you got OTA update , oFox flash it automatically.. good stuff. I god my first OTA update, and when I press update, phone just restart in oFox and update it self, after install restart phone and got new update .. good stuff.. I recommend you to try oFox
tze_vitamin said:
Use it's recovery, it's better than TWRP, also when you got OTA update , oFox flash it automatically.. good stuff. I god my first OTA update, and when I press update, phone just restart in oFox and update it self, after install restart phone and got new update .. good stuff.. I recommend you to try oFox
Click to expand...
Click to collapse
thanks bro! i will try it! ^^
Great ROM only things I'm missing are small mobile icons and inverted navbar
tze_vitamin said:
Use it's recovery, it's better than TWRP, also when you got OTA update , oFox flash it automatically.. good stuff. I god my first OTA update, and when I press update, phone just restart in oFox and update it self, after install restart phone and got new update .. good stuff.. I recommend you to try oFox
Click to expand...
Click to collapse
Can you just flash ofox in twrp ?
Ok, so I have been experimenting and torturing this device for months now and I still love it. I have learned sooo much using this as my test bunny for all the cool custom ROMS and extra bells and whistles that it can possibly throw at it and in it. I owe it all to everyone that posts in this forum and XDA. I learned all this stuff from you,
and it has become a passion of mine now. I have experimented with other devices as well using knowledge and tools acquired here. And now here I am today.
This is my current set up:
Nord N10 5G T-mobile US Variant
I used MSM tools and some file manipulation to kill the T-mobile issue {evil grin} thanks to "some random username: and "Kronflux"
* =sorry fellas if I goofed up your nicks
I installed a stable working release of Android 12 running on a Pixel 5 GSI from ErfanGSI.Tools
I am rooted thru Magisk 23 using a *PE boot image and flashed patch thru Platform tools (the old school method)
I use Nova Prime Beta as a launcher
*does not pass safety net but can run and use most all mods work
It runs very smooth, however Chrome does *not work yet all other Google crap seems to be fine.
5G LTE works. and there is a hardware error on bootup, but it doesn't flake out.
Battery life is terrific, and it doesn't get hot.
No camera app with this GSI but I have an app I prefer, and it performs perfect.
90hz refresh has to be forced in dev options.
No SD access from PC only access thru device
All the sudzie powers of Hell and Android 12 work perfectly.
Overall this build is great, and it's running Android 12!! A12 is not going to be awarded the chance to run officially on this device so it makes me happy to run it "our way"!
All software install and mods were performed using the newest Platform tools with ADB and fastboot. Also, I used the latest lineage recovery during the setup.
No TWRP, no sideloads. This is a GSI not a ROM.
Again, big thanks to you all for making these things available.
#XDA rocks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please post installation method and link to GSI
umaga2012 said:
Please post installation method and link to GSI
Click to expand...
Click to collapse
Simple method
MSM tools device reset to A10
flash unlock token/ oem unlock/ unlock bootloader
**CLEAN FLASH!!!!!!
fastboot -w erase userdata and erase system_a/b
flash lineage recovery (can be found by searching in XDA recovery_a and recovery_b
download and extract GSI **see op about what GSI was used and searches I can't provide links
flash system_a and system_b
factory reset in lineage recovery
reboot
done
If for some reason it doesn't work you can pull the vendor.img and perhaps boot.img from stock OS, erase/and flash them. Retry booting GSI after that.
You can root with Magisk 23 by using boot.img from PE A11 version and flash patched image
Spidermonkeyj75 said:
Simple method
MSM tools device reset to A10
flash unlock token/ oem unlock/ unlock bootloader
**CLEAN FLASH!!!!!!
fastboot -w erase userdata and erase system_a/b
flash lineage recovery (can be found by searching in XDA recovery_a and recovery_b
download and extract GSI **see op about what GSI was used and searches I can't provide links
flash system_a and system_b
factory reset in lineage recovery
reboot
done
If for some reason it doesn't work you can pull the vendor.img and perhaps boot.img from stock OS, erase/and flash them. Retry booting GSI after that.
You can root with Magisk 23 by using boot.img from PE A11 version and flash patched image
Click to expand...
Click to collapse
Do you know how exactly you could update once you do get the GSI installed? Sorry I'm new to this whole GSI and Treble thing...
JazzieBoi said:
Do you know how exactly you could update once you do get the GSI installed? Sorry I'm new to this whole GSI and Treble thing...
Click to expand...
Click to collapse
Gsi don't update, you have to flash a new version of it through the same method if an update is available.
ninjasinabag said:
Gsi don't update, you have to flash a new version of it through the same method if an update is available.
Click to expand...
Click to collapse
So far as I can tell you have to flash a new OS/GSI every time a new update is released. It's a bit of a pain in the ass , but it's worth the effort once you have the main GSI established it's easy to build off that.
Spidermonkeyj75 said:
So far as I can tell you have to flash a new OS/GSI every time a new update is released. It's a bit of a pain in the ass , but it's worth the effort once you have the main GSI established it's easy to build off that.
Click to expand...
Click to collapse
Okay well wouldn't that mean you'd have to wipe userdata (internal storage) everytime you want to update it?
JazzieBoi said:
Okay well wouldn't that mean you'd have to wipe userdata (internal storage) everytime you want to update it?
Click to expand...
Click to collapse
No, you can skip the formatting phase from what I've gathered.
ninjasinabag said:
No, you can skip the formatting phase from what I've gathered.
Click to expand...
Click to collapse
Oh that doesn't so bad, I was thinking of giving it a shot when I get some downtime. Is it very difficult to go back to OxygenOS? Im assuming if I get stuck I could just flash back to stock using MSMtool?
JazzieBoi said:
Oh that doesn't so bad, I was thinking of giving it a shot when I get some downtime. Is it very difficult to go back to OxygenOS? Im assuming if I get stuck I could just flash back to stock using MSMtool?
Click to expand...
Click to collapse
Not difficult at all using the msmtool. Just takes time.
Running tiramisu A13 dev preview on the same OPN105G
Spidermonkeyj75 said:
Running tiramisu A13 dev preview on the same OPN105G
Click to expand...
Click to collapse
Could you share which A13 dev preview? Pixel 4, 5,etc. I would love to give it a try. Thanks.
sure