Related
I DO NOT OWN THE ROM.
The developer of this rom is kumajaya on MIUI forum and thanks to him for his work.
MISSION:
Embarrass Xiaomi because refuse to release Redmi 2 kernel source
BUG:
Before you install this ROM, check your device magnetic sensor. Currently YAS537 not supported!
Still under development, built from sources, no hidden sources, not a binary dirty hack ROM
The following will not be supported in this thread:
- Custom Kernels
- Mods, including CPU management mod or any strawberry mod
- Modified system files
- Xposed
If you reuse even a part of my work here, a proper credit is a must, keep it open source also a must
Download:
Cyanogen and TWRP recovery: https://goo.gl/cDJQXI
CyanogenMod 12.1 ROM: https://goo.gl/zhGZjQ and https://goo.gl/5sqZGp
For better Google experience, install TK GApps Nano: http://forum.xda-developers.com/android/software/tk-gapps-t3116347
Don't create any mirror without a permission!
Cyanogen recovery above just like a standard AOSP recovery without a lot of features compared to TWRP, but you can temporary boot it using "fastboot boot cyanogen-recovery-wt88047.img" command to check if CyanogenMod 12.1 ROM possibly working on your device variant.
Don't even try this ROM on Redmi 2A variant!
Sources:
CyanogenMod source tree: [url]https://github.com/CyanogenMod[/URL]
Kernel source: https://github.com/kumajaya/android_kernel_cyanogen_msm8916
Device specific source: https://github.com/kumajaya/android_device_wingtech_wt88047
Vendor binaries: https://github.com/kumajaya/proprietary_vendor_wingtech
Changelog:
Device specific source: https://github.com/kumajaya/android_device_wingtech_wt88047/commits/cm-12.1
Kernel source: https://github.com/kumajaya/android_kernel_cyanogen_msm8916/commits/cm-12.1-amss-1.0.2-wt88047
Vendor binaries: https://github.com/kumajaya/proprietary_vendor_wingtech/commits/cm-12.1
Credits:
Google, AOSP, Cyanogen, CyanogenMod community, Qualcomm's CodeAurora @balika011, @zwliew, @Flour_Mo
Introducing me: XDA Recognized Developer, CyanogenMod contributor
My wife, she always believed I could restore back her device in minutes
Some tools: Kate (text editor), Kompare (diff viewer and generator), qgit (git GUI)
Smarfren Indonesia for Andromax Q source code
Micromax India for Yuphoria and Yureka source code
Current status:
Boot to Android, this is my first ROM that really boot on the first try
Touchscreen works, all hardware button mapped correctly
No screen flicker, fluid graphics
Voice call and SMS works, data over WiFi and GSM works (radio config in build.prop fix previous GSM issue)
Vibration and screen rotation works
All sensors seem works including GPS and compass but light sensor still need a fine tuning
Both camera working, the author found a super clean solution
No boot animation (fixed, kernel issue) Disable splash screen break Android boot animation but if I enable it, Cyanogen recovery covered by Tux the penguin logo in the center. The workaround solution, move Tux to the top right of the screen
No sound (fixed, kernel and user space issue) This also fix slow boot because of logcat flooding. BUG: Speaker output ignore headset jack insertion, sound out from both speaker and headset
Bluetooth file transfer fail (~42MB zip, failed at 17%) WiFi file transfer way faster
FM radio works
WiFi hotspot works
YouTube and local video 720p works
LED driver working great, multi color and blink
Remember, no contribution from Xiaomi yet. That's the reason why I try to avoid "Xiaomi" string in my source as possible but Wingtech.
I use CyanogenMod resources as much as possible, including common MSM8916 device tree and kernel. Maintain device source tree and leave common part to CyanogenMod community. I'll strictly follow CyanogenMod coding style and source structure. This is about source code quality.
AGAIN, I DO NOT OWN THE ROM.
Will try it soon. And I hope Xiaomi will release the kernel like Redmi 1s.
kumajaya and zwliew are the most stable CM12.1 roms for our phone. I hope they reach 100% full working version in near future.
Thank you both!
Can you upload the changelog for the latest [30/09/15] build. Also is the YAS537 supported
How about some screenshots?
What is the point of this thread when the original poster already has one on XDA?
Sent from my Nexus 7 using Tapatalk
crzlloid said:
Can you upload the changelog for the latest [30/09/15] build. Also is the YAS537 supported
Click to expand...
Click to collapse
There is a link in my post about the changelog and the YAS537 is still not yet supported.
zwliew said:
What is the point of this thread when the original poster already has one on XDA?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Sorry, but I have already talk to kumajaya about it. Then he ask me to help him on requesting an official sub-forum for our device. Anyways, if anyone here oppose me about posting this thread, then maybe I should delete this.
wow, using this in 2020, 5 years later.
This is only for SM-P605 (lt03lte)! Even loading an custom recovery will irreversible trigger Knox to 0x1!
Here some warm pie for our Note 10.1 2014 LTE.
LineageOS (former CyanogenMod) is a free, community built, aftermarket firmware distribution of Android 9 (Pie) , which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (GApps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS GitHub repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
How to flash:
-Be sure you are on 5.1.1 Bootloader and Modem (Flash 5.1.1 firmware via Odin) !
-Flash TWRP (version 3.2.1-0 or newer needed)
-Make Nandroid backup (optional)
-Wipe > Advanced Wipe > select data, system, ART/Dalvik Cache, Cache, Internal Storage > Swipe
-Install > select Lineage 16.0 Zip > Swipe
-Reboot
Please read full OP before posting or flashing anything. Please don't report any bugs, if you use Xposed, any mod or modified the system.
What is working
Wifi
Sound
Bluetooth
S-Pen
Off Charging
ADB/MTP
RIL
...
What is not working
Camera
Wifi Hotspot
...
Untested
GPS
IR
...
Bugs/ other things
SELinux Permissive
...
Download
Notes:
- TWRP 3.2.1-0 or newer necessary
Changelog:
--Lineage--
20190604: fixed mobile data, many changes and cleanup, added spen pointer...
20181006: fixed RIL, fixed USB MTP, disabled USB host mode, small things
20180825: first test build
Screenshots
Credit: LineageOS Team, Maintainer and Valera1978
Kernel Source
XDA:DevDB Information
[ROM][SM-P605][9.0] Unofficial LineageOS 16.0 for lt03lte (25.08.2018) [TEST], ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
davidmueller13
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 5.1.1 Bootloader/Modem and TWRP 3.2.1-0 or newer
Based On: LineageOS
Version Information
Status: Alpha
Created 2018-08-25
Last Updated 2019-06-04
I saw the new branch on Github and was waiting for this. Huge thank you to you for the continued support of our device!
Edit:
Oh yeah, will try tomorrow!
Hi davidmueller13,
Thank you so much for your passion and keep working for our dying tablet.
I'm sure it will revive this tablet quite useful again.
Looking forward to seeing a wonderfully baked PIE!
Hooray!!!
Thanks a lot for your support to let our loved tablet remain alive !!!!!
Yes!! Thank you so much David!
Yes!! Thank you so much David, greatness for the support and giving new life.
Cool, bummer we don't see love for our P600's as well.
BA_Flash_GOD said:
Cool, bummer we don't see love for our P600's as well.
Click to expand...
Click to collapse
Because it has an Exynos processor.
Thanks Davidmueller for continuing support to our
Note 10.1 2014 LTE.
Mine is a T-Mobile US P-607T and so far has been compatible with all P605 builds.
Would this work on the 2012 edition?
Would this work on the 2012 edition?
No!!
is this usable on p605k?
i have problem getting into twrp in my 605
enriqueyang said:
i have problem getting into twrp in my 605
Click to expand...
Click to collapse
Could you explain which kind of problem you are facing ?
Tilagoon said:
Could you explain which kind of problem you are facing ?
Click to expand...
Click to collapse
i manage to install twrp with odin, however, i can access menu of twrp,
is there other way to flash the firmware without twrp?
enriqueyang said:
i manage to install twrp with odin, however, i can access menu of twrp,
is there other way to flash the firmware without twrp?
Click to expand...
Click to collapse
Have a look here: https://twrp.me/samsung/samsunggalaxynote1012014qcom.html
you will see some alternative ways of installing TWRP
Tilagoon said:
Have a look here: https://twrp.me/samsung/samsunggalaxynote1012014qcom.html
you will see some alternative ways of installing TWRP
Click to expand...
Click to collapse
thank u, will try
Install on my 607, installed ok, gapps installed ok, but there seems to be an issue with the wifi.
I'm unable to see my AP. Other devices connect just fine. I don't use the 4g/LTE sim slot.
*UPDATE 1*
The SSID is not broadcasting, it can see other networks/connect that ARE broadcasting the SSID
*UPDATE 2*
Google is being dumb. I found an additional setting for when adding a hidden wifi network.
Their response (and how to get it to work) is here:
https://productforums.google.com/forum/#!topic/phone-by-google/TAaxC5VPL8A
secretwolf98 said:
Would this work on the 2012 edition?
Click to expand...
Click to collapse
No chance... Can you put a 2014 edition rom on your 2012 edition and have it run?
New build
Changelog:
- fixed RIL
- fixed USB MTP
- disabled USB host mode
- small things
Download
Note: This is not a ROM based on the ROM shipped with your device. Exynos variants such as International (F), International Dual(Hybrid)-SIM (F/DS), Korean (N) ONLY. In NO way it is compatible with Snapdragon variants including but not limited to American(U/U1/A/T/P/V), Chinese(0/8/6), Hong Kong(0), Japanese(SC-*), Canadian(W) variants.
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Features Overview:
https://www.xda-developers.com/lineageos-15-feature-list-overview-screenshots-video/
Screenshots:
View attachment 4491847View attachment 4491848View attachment 4491849View attachment 4492992
Device Info:
Galaxy Note 9 (Exynos): TBD
What's working:
TBD
This build is an official LineageOS build. Compliance with our device support requirements is enforced and guaranteed. That means including but not limited to these hardwares will work:
Wi-Fi
Bluetooth
Mobile Network (Calling, Data, etc.)
Audio
USB
GPS
Camera
Fingerprint Sensor
NFC
Etc. Check device support requirements for more.
What's not working:
Applicable exceptions granted in device support requirements.
Obviously Samsung's own features such as Samsung Pay, KNOX, Theme Center, Game Launcher, etc. won't be ported to LineageOS. We may have our own implementation to similar functions, though.
Iris sensor does not work because AOSP upstream does not support that yet.
IMS services (VoLTE, VoWiFi, etc). Samsung has their own proprietary implementation. It is not really possible to easily port that to LineageOS.
Instructions:
Make sure TWRP has been installed and functional
Download the latest build (and optionally gapps)
Download the compatible vendor image (https://androidfilehost.com/?w=files&flid=284041)
Reboot to recovery
Wipe data and cache (required if you switch from other ROMs)
Flash the vendor image
Flash the latest build (and gapps)
Reboot
LineageOS updater will handle updates automatically (OTA).
If you upgrade manually from older official releases to newer releases, you don't need to wipe your data or reflash gapps.
Downloads:
Galaxy Note 9 Exynos (N960F/FDS/N): https://www.androidfilehost.com/?w=files&flid=284057
Root addon: https://download.lineageos.org/extras
Google Apps: https://wiki.lineageos.org/gapps.html
Reporting Bugs:
https://wiki.lineageos.org/bugreport-howto.html
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /proc/avc_msg.
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Please use LineageOS BUG tracker to report BUGs. BUGs reported in the thread could be ignored due to large number of posts.
Channel and Group:
LineageOS Channel (News and Updates):
https://t.me/lineageos_star
AOSP-like ROMs (not limited to LineageOS) Group (Discussion, Quick Tech Support and Early Testing):
https://t.me/joinchat/DTrGs0ygFKxHhc3bb11YKw
XDA:DevDB Information
LineageOS for Galaxy Note 9, ROM for the Samsung Galaxy Note 9
Contributors
jesec
Source Code: https://github.com/LineageOS/
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2018-10-18
Last Updated 2018-10-18
Reserved
Reserved
Happy days! Thank you Jesse Sir!
Thank you soo much sir
---------- Post added at 07:15 AM ---------- Previous post was at 07:13 AM ----------
And good luck for LOS 16! I'm sure you can give us a sweet slice of pie
I have been waiting for this, once my bootloader is unlock ill see to it, it will be my 1st try to note 9 cfw. Thanks jesec.
Flashed, stuck at bootlogo. Doesn't even loop?
Tried flashing with noverity, tried with magisk, without magisk. Maybe vendor is bad?
s3xxt0y said:
Flashed, stuck at bootlogo. Doesn't even loop?
Tried flashing with noverity, tried with magisk, without magisk. Maybe vendor is bad?
Click to expand...
Click to collapse
yeah i think vendor is broken, try stock vendor
malinathani said:
yeah i think vendor is broken, try stock vendor
Click to expand...
Click to collapse
Flashed with diff stock vendors still stuck @ bootsplash.
Edit: tried without gapps to be sure too. Still no joy.
Jesse - might be worth joining the Note 9 AOSP Telegram. There's 50 of us in there if you need us for testing etc;
https://t.me/joinchat/GnVMLU__5M8g5NaStUlbRg
s3xxt0y said:
Flashed with diff stock vendors still stuck @ bootsplash.
Click to expand...
Click to collapse
bootsplash stuck could be a kernel
Are you sure magisk script ran correctly? Try flashing magisk again and see.
Thanks brother
Hello,
Does S-pen features work?
Thx
how to fix bootsplash?
Well hot damn! :highfive:
muhyidin said:
Hello,
Does S-pen features work?
Thx
Click to expand...
Click to collapse
spen is for touch wiz aka Sam experience
for the rest if the android world it's a mouse pointer.
Thank you @jesec for the effort.. This is exactly what I was looking for.
I tested this on N960F/D got stuck on bootsplash as well, I tried both Stock Vendor and the provided Vendor Images, with or without magisk with no luck.
I tried restoring boot image from previous backup (this might sound stupid) but I got past the splashcreen into Lineage Loading screen, it would stay for a minute then reboot to recovery.
For people who got stuck in the bootsplash
To exit the bootSplash freeze use the download mode button combination: Down+Bigsby+Power until screen goes off then recovery shorcut Up+Bigsby+Power,
Did anyone manage to make this work?
that_same_guy said:
Thank you @jesec for the effort.. This is exactly what I was looking for.
I tested this on N960F/D got stuck on bootsplash as well, I tried both Stock Vendor and the provided Vendor Images, with or without magisk with no luck.
I tried restoring boot image from previous backup (this might sound stupid) but I got past the splashcreen into Lineage Loading screen, it would stay for a minute then reboot to recovery.
For people who got stuck in the bootsplash
To exit the bootSplash freeze use the download mode button combination: Down+Bigsby+Power until screen goes off then recovery shorcut Up+Bigsby+Power,
Did anyone manage to make this work?
Click to expand...
Click to collapse
Same problem here, Stuck on bootloop
Jesec is back
The ROM doesn't boot for anyone curious. I haven't heard of a report of one booting successfully anyway.
bober10113 said:
spen is for touch wiz aka Sam experience
for the rest if the android world it's a mouse pointer.
Click to expand...
Click to collapse
You maybe answer the sensitivity level but there is also the need to some kind of powering off the 500KHz signal send when not using the pen.
Then can we use the sensor to activate the pen ? What about the Bluetooth button ?
The wacom screen could be initialize from the begining with Project Trebble. What's the differences with LOS for S9s ?
64 bit vendor for A6
The day is here... the day we never thought was ever going to be possible. Exynos 7870 is now running 64 bits. This magic was made possible by @Astrako
I hope everybody appreciates the dedication and the countless hours he must've gone through to get this to work.
Please don't take anything from this vendor set-up. I used took Astrako's vendor in H-ROM and adapted it to A6 with his permission. Don't try to claim it as your own.
Please give thanks to the original thread that made this possible: Click here and give thanks!
Also, A HUGE HUGE HUGE DISCLAIMER:
I do not own an A6. This vendor was originally made for the J6, but since they are somewhat similar it only needed a few file swaps to get most things to work. I only have 2 testers and we managed to fix most stuff. Flash under your own risk and expect bugs!
Code:
Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about flashing this zip file
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. HARD!
Features!
64bit enabled vendor
Bugs!
This will not work with 32 bit OneUI. DON'T FLASH ON ONEUI
NFC is probably broken
Changelog!
05/08/19: Update to 1.1.- Fixed a few audio bugs and should be more stable
23/07/19: Release
Links!Google DriveOld Versions:
1.0-
Google Drive
Instructions!- Create full backup before trying
- Wipe system, data, cache and dalvik
- Flash 64bit A-Only GSI
- Reboot to TWRP
- Flash "Treble-64bit Vendor for A6.zip"
- Follow any specific instructions that the GSI may contain
- Enjoy!
Credits! @Astrako For his hard work in getting the 7870 to run 64 bit. All the community will always be grateful for opening this huge gate. Thank you
@ananjaser1211 for all your help on fixing bugs and for always being great support for 7870.
@SPARTANICUS for your support on Helios kernel and for all the work in this version of Helios.
@KassemSYR for his help on fixing a few audio and camera bugs
@topjohnwu for Magisk
@DaanDH12 for always being willing to test my stuff
@henok.gk for helping out with some edits
@ Samsung for the firmware
@ Team TWRP for their amazing recovery
@ To users like you!
If you feel I missed you, please give me a PM so I can add you
XDA:DevDB Information
64bit Vendor for A6, ROM for the Samsung Galaxy A6
Contributors
ShaDisNX255, Astrako, Ananjaser1211
Source Code: [URL="https://github.com/SPART4NICUS/KRAKEN_7870"[/URL]
ROM OS Version: 9.x Pie
Based On: GSI
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2019-07-23
Created 2019-07-23
Last Updated 2019-07-23
Join our Telegram group
Code:
Check out the latest projects on our Telegram group, where we share our advancement on new things and try to help as best as we can.
For anything already released, please ask here in XDA
Link: Telegram Group
FAQ
[Q] My phone is stuck in bootloop/infinite boot, what should I do?
[A] It is normal for first instalation to take aprox 10-20 minutes on first boot, let it sit for a little bit
[Q] Even after 20 minutes, my phone is still in a bootloop/infinite boot, what can I do?
[A] It is possible that your previoius Android setup is conflicting with this new setup. Please, do the following:
1. FORMAT DATA (not WIPE, FORMAT!)
2. Try the instalation of the GSI and make sure you follow the instructions correctly
[Q] I've found a bug, what should I do
[A] Due to the nature of GSI, I cannot fix bugs that may come from the ROM you are using
-reserved3-
good job mate!
Only a6? or a6+ too?
dkrs_ said:
Only a6? or a6+ too?
Click to expand...
Click to collapse
Doesn't work for A6+ it has different processor:crying:
Sorry guys, this is A6 Exynos 7870 only.
Exynos 7870 is shared between a lot of devices and it's very easy to port between them. Not to mention that there are a lot of devs that work on 7870.
Why my display not like samsung after i flash it
Just like hwawei phone after i flash the terble??
Is that some thing wrong or i wrong download gsi??
TanWil said:
Why my display not like samsung after i flash it
Just like hwawei phone after i flash the terble??
Is that some thing wrong or i wrong download gsi??
Click to expand...
Click to collapse
What GSI did you download?
Looks like DaanDH12 is salty lol.
ExtremeGrief said:
What GSI did you download?
Looks like DaanDH12 is salty lol.
Click to expand...
Click to collapse
I don't know what gsi i use
I download from xda phhuson i think
I don't know where should download it i search on google there is no gsi for samsung a600g
Can you help me?
Updated vendor to 1.1
Changelog:
-Fixed a few audio bugs
Special thanks to @henok.gk for making the edits and uploading for all A6 users to use and improving the 64bit experience
update your source code it's on my github
SPARTANICUS said:
update your source code it's on my github
Click to expand...
Click to collapse
How i can update my source code??
If i flash gsi my telephone doesn't work
TanWil said:
How i can update my source code??
If i flash gsi my telephone doesn't work
Click to expand...
Click to collapse
make sure to follow the instructions, it's easy
hello, on the A600FN single sime phh v117, the network signal is gray, the 4g is working, I tried with varied gsi roms but still the same problem,
some ideas to solve?
with 32bit vendor I don't find the problem
thank you
ciao, the proximity sensor doesnt trigger touch when sensor is covered. In fact if you call someone, display go off, but touch still working, so you can use your phone even with screen off
the correction should be this:
https://github.com/phhusson/platform_frameworks_base/commit/2699dc1cb20a07e8bccf60b47d556d10289bb3b3
It worked on SM-A600G but Camera app does not work. I have installed arm32 too but not luck the camera app also does not work. For you who want to try it, what this video https://youtu.be/NryORE8Q7Ds how to install GSI ROM and 64bit Vendor on your Galaxy A6.
redymedan said:
It worked on SM-A600G but Camera app does not work. I have installed arm32 too but not luck the camera app also does not work. For you who want to try it, what this video https://youtu.be/NryORE8Q7Ds how to install GSI ROM and 64bit Vendor on your Galaxy A6.
Click to expand...
Click to collapse
Try with open camera, for me it worked
The only thing that isnt working its SIMCards at least for me
btw for installing images its Arm64 A only or A64 binder A only? its not clear
Code:
/*
* Your warranty will be VOID after installing a custom ROM.
*
* Get notified yourself that I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this ROM
* before flashing it!
* YOU are choosing to make these modifications,
* and if you point the finger at me for messing up your device,
* I will laugh at you.
*/
# HavocOS
Havoc-OS is an after-market firmware based on Android Open Source Project, inspired by Google Pixel with a refined Material Design 2 UI. We offer a smooth and stable experience for your device with a selected set of amazing features that provide an exceptional user experience.
# What's working
Display/Touchscreen
LiveDisplay
Audio playback
Quad speakers
Headphone/Headset
Bluetooth audio
Video playback
HDR
Camera
Microphone
Sensors
Fingerprint sensor
GPS
LTE (SM-T825)
WiFi
WiFi display
Hotspot
Bluetooth
DRM
Widevine L1
USB ADB/MTP/OTG
Samsung Doze
S-Pen
Palm rejection
SD Card
Power-off mode charging
# What's not working
Some HavocOS features like AppLock
Fast charging
SELinux permissive
Hardware encryption
Please see the "Known issues" part of this post
# Downloads
## HavocOS 4
Galaxy Tab S3 LTE (gts3llte, SM-T825)
Galaxy Tab S3 WiFi (gts3lwifi, SM-T820)
## Google Apps
OpenGApps
NikGApps
BiTGApps
Others may also work but not tested
## TWRP Recovery
You can use mine, please visit this thread.
You can use F2FS file system for cache, data partitions with my TWRP recovery.
[RECOVERY][SM-T820][SM-T825][UNOFFICIAL] TWRP for Galaxy Tab S3
# How to install
Unlock the bootloader.
Download TWRP and flash the recovery image via Odin.
Download HavocOS 4 for Galaxy Tab S3.
Be aware of the board name.
Download GAPPS for Android 11 and the others you want to flash.
Only OpenGApps is tested. (open_gapps-arm64-11.0-pico-20210130-TEST.zip)
Enter TWRP recovery.
The first boot to TWRP might be very slow because of the unmatched file systems.
Format the whole system, data, cache partitions using the format menu.
You will type `yes` to do that.
Flash the images.
If you're going to install GApps or something, you have to install the LineageOS first.
Reboot the system.
Done.
# Known issues
Follows it might have the same issues on my LineageOS 18.1
Thank all of you for the feedback
# Sources
Device Tree
gts3l-common: https://github.com/awesometic/android_device_samsung_gts3l-common
gts3llte: https://github.com/awesometic/android_device_samsung_gts3llte
gts3lwifi: https://github.com/awesometic/android_device_samsung_gts3lwifi
Kernel: https://github.com/awesometic/android_kernel_samsung_msm8996
Vendor: https://github.com/awesometic/proprietary_vendor_samsung
# Telegram Groups
If you are interested in developing this potential machine, please tell me through PM then I will send you the invitation link.
If you need a general discussion channel for this potential machine or want to share the news of its Android projects from anyone to everyone, you can join our discussion group chat.
Galaxy Tab S3 General Discussion
# Buy me a coffee
If you like my efforts or would like to support me, please don't hesitate to buy me a cup of coffee.
https://www.paypal.com/paypalme/awesometic
# Credits / Special thanks to
Android Open Source Project
LineageOS Team
HavocOS Team
@Valera1978 for his amazing previous work including his MSM8996 kernel
@supermike86 and @samsuffit for testing LineageOS 18.1 for T820, which is I don't have one
@bmwdroid and @cherepanov for confirming the LTE works
@sebmue for letting me know that the useful information for palm rejection, and @ghostwheel for sharing its working source codes on Android 9
@switchgott for helping me in the development discussion and creating Telegram groups
All from our Telegram discussion channel, @EonOfBlack , Sands, David Becker, ...
@LuK1337 for giving me a hint to fix the quad-speakers.
## Changelogs
2022. 5. 8
gts3l-common: Applied the new security patch, April 5, 2022
gts3l-common: Updated to HavocOS 4.16
The other changed things are the same as the LineageOS 18.1 (2022. 5. 8)
2022. 2. 23
gts3l-common: Applied the new security patch, February 5, 2022
gts3l-common: Updated to HavocOS 4.14
The other changed things are the same as the LineageOS 18.1 (2022. 2. 23)
2022. 2. 9
gts3l-common: Applied the new security patch, January 5, 2022
gts3l-common: Updated to HavocOS 4.13
The other changed things are the same as the LineageOS 18.1 (2022. 2. 9)
2021. 12. 19
Initial release
## Good to know
Basically, it follows my LineageOS 18.1 changelogs.
reserved
nice to see something happening for the s3 ...
cannot test right now, but great work so far ;-)
How does havocOS Compare to your lineageOS in terms of speed?
Floobah said:
How does havocOS Compare to your lineageOS in terms of speed?
Click to expand...
Click to collapse
I think those two have the almost same speed. But HavocOS has more customizable options and it passes CTS profile with Magisk Hide.
This rom works very well. Thanks for releasing it.
I have installed the lineage OS 18.1 ROM recently. Can I dirty flash this one or I have to format everything and loose root and all the applications I have installed?
xpil said:
I have installed the lineage OS 18.1 ROM recently. Can I dirty flash this one or I have to format everything and loose root and all the applications I have installed?
Click to expand...
Click to collapse
You should format everything to move to another ROM. It is strongly recommended, and we don't know what problem will be caused by dirty flashing from LineageOS to HavocOS.
xpil said:
I have installed the lineage OS 18.1 ROM recently. Can I dirty flash this one or I have to format everything and loose root and all the applications I have installed?
Click to expand...
Click to collapse
I did a dirty flash from latest LOS 18.1 to Havoc since it has the same LOS base and i had no issues so far.
But i idk how it will be for you. Only thing i did was formating system partition in TWRP before i flashed Havoc.
But try it on your own risk.
I was literally about to trade in my Tab S3 as it was on its last legs. Slow to do anything other than browse and even that was painful.
Having read these forums for a long time I thought I'd give this a try before committing £600.
After a few hiccups with TWRP not seeming to 'stick' I finally managed it.
What a difference! Its seriously like a new machine.
Fast, responsive and up to date.
Thank you so much for all your hard work.
ptwilliams said:
I was literally about to trade in my Tab S3 as it was on its last legs. Slow to do anything other than browse and even that was painful.
Having read these forums for a long time I thought I'd give this a try before committing £600.
After a few hiccups with TWRP not seeming to 'stick' I finally managed it.
What a difference! Its seriously like a new machine.
Fast, responsive and up to date.
Thank you so much for all your hard work.
Click to expand...
Click to collapse
I was exactly at the same point.. The difference is night and day! Great work from the Dev! Donation on the way
Hi Awesometic,
Thx for this rom.
Gonna try it.
Can I use open_gapps-arm64-11.0-pico-20211217 ?
Is this the right and latest one?
Duvel999 said:
Hi Awesometic,
Thx for this rom.
Gonna try it.
Can I use open_gapps-arm64-11.0-pico-20211217 ?
Is this the right and latest one?
Click to expand...
Click to collapse
Yeah it seems like. You can use that version, it should work.
thanx.....but i keep losing Gps signal
Thanks for the hard work! This rom is awesome! I gave up on this tablet due to lack of support. I feel like you made this a true ipad contender!
I hope you do android 12 as well!
Dear all. I have a question and if someone knows please help. I installed yesterday viper4android via magisk. Even though I played with all its parameters I could NOT notice any changes in the sound of the speakers. I CAN'T understand why.
Dear all, I have tried the steps to flash the HAVOC rom but facing an error. My tab (825) is correctly unlocked and the right recovery flashed. It can boot successfully to the recovery, however I see the error E: failed to verify whole-file signature. With other ROMs I flash, I am able to skip the signature verification prompt which does not appear here.
Please help me out if you can.
Thanks all.
prubyholl said:
Dear all, I have tried the steps to flash the HAVOC rom but facing an error. My tab (825) is correctly unlocked and the right recovery flashed. It can boot successfully to the recovery, however I see the error E: failed to verify whole-file signature. With other ROMs I flash, I am able to skip the signature verification prompt which does not appear here.
Please help me out if you can.
Thanks all.
Click to expand...
Click to collapse
You need to install TWRP to install custom rom.