Related
So what I did was.
-Root my phone using the lastest guide.
-Succesfully Rooted.
-Install Xposed Framework
-Rebooted Phone, STUCK IN BOOT ANIMATION
Followed this guide;
Use fastboot
- Download Miflash and unzip the file on your computer (c
- connect your Redmi 1S to your computer
- hold together Vol - and Power
Your enter in the fastboot mode
- open Miflash (take a while to open because it install drivers, etc)
- click on refresh and the flash tool reconized your phone
- click on browse and select where you unzip the fasboot image
Wait 5 minutes.
The phone reboot on the official Chinese - English ROM. You can flash what you want after.
But nothing is working.
Phone is just in the FASTBOOT logo
And the MiFlash wont recognize my phone
HELP =[
jazvdb said:
So what I did was.
-Root my phone using the lastest guide.
-Succesfully Rooted.
-Install Xposed Framework
-Rebooted Phone, STUCK IN BOOT ANIMATION
Followed this guide;
Use fastboot
- Download Miflash and unzip the file on your computer (c
- connect your Redmi 1S to your computer
- hold together Vol - and Power
Your enter in the fastboot mode
- open Miflash (take a while to open because it install drivers, etc)
- click on refresh and the flash tool reconized your phone
- click on browse and select where you unzip the fasboot image
Wait 5 minutes.
The phone reboot on the official Chinese - English ROM. You can flash what you want after.
But nothing is working.
Phone is just in the FASTBOOT logo
And the MiFlash wont recognize my phone
HELP =[
Click to expand...
Click to collapse
Is you problem solved now?
jazvdb said:
So what I did was.
-Root my phone using the lastest guide.
-Succesfully Rooted.
-Install Xposed Framework
-Rebooted Phone, STUCK IN BOOT ANIMATION
Followed this guide;
Use fastboot
- Download Miflash and unzip the file on your computer (c
- connect your Redmi 1S to your computer
- hold together Vol - and Power
Your enter in the fastboot mode
- open Miflash (take a while to open because it install drivers, etc)
- click on refresh and the flash tool reconized your phone
- click on browse and select where you unzip the fasboot image
Wait 5 minutes.
The phone reboot on the official Chinese - English ROM. You can flash what you want after.
But nothing is working.
Phone is just in the FASTBOOT logo
And the MiFlash wont recognize my phone
HELP =[
Click to expand...
Click to collapse
Try this
http://en.miui.com/thread-57188-1-1.html
Recently while flashing alpha version of MIUI marshmallow on my Mi 4w, my phone got completely bricked. Complete brick in the sense, it won't turn on, neither charge nor show any led indication. This guide should work on other phones also.Let's start:-
1) Although it seems like your phone wont turn on, your phone is actually working, it's just it wont show anything on the screen(no display).
Make sure your phone is charged properly(it will charge even if the led doesn't show any indication).
2) Download and install Mi flash tool and then Fastboot file of your device. http://en.miui.com/a-234.html
3) Unzip the fastboot image, a folder containing flash all.bat should appear if not, extract the extracted file again. Winrar should work fine.
4) Now open Mi flash tool(as administrator) and select the fastboot folder from Mi flash using browse option and also select the proper fastboot script according to need.
Note: Flash_all.bat will completely erase your internal storage.
5) Now press volume down(-) and power key to enter into fastboot. Note: it won't show any visual whatsoever but it'll work.
6) Connect your phone to your pc. It should show various flash devices connected to your computer and those devices may continuosly connect and disconnect. If not it'll show QHUSUB_BULK install the driver using device manager.
7) On Mi flash tool, some device name should show on the devices list if not click refresh and try reconnecting the device. Note: If you dont have proper drivers installed on your pc, this procedure won't work.
8) Finally click on flash and flashing will start. It'll take some time. Once done it'll show operation completed successfully.
9) Finally boot your device using power key.
Brick has received QHSUSB_BULK simple. This is the normal and regular encounter. Hardbrick, you must check point.
2ConHeo said:
Brick has received QHSUSB_BULK simple. This is the normal and regular encounter. Hardbrick, you must check point.
Click to expand...
Click to collapse
who said so?
tested and working
that normal check point is a pain in ass to execute in the first place
Thanks a ton.....It helped a lot
thank u...
thank
How do I put the phone into fastboot mode if it is hard bricked? It won't turn on, I get no responce from phone. When I use method connecting test point to metal cover on mother board of phone usb connects to PC and MiFlash recognizes phone. Try to flash though and I get an error message. No matter what ROM I use, zipped, unzipped or tgz file. Can my phone be unbricked? What am I doing wrong? I have a Mi Max 64GB and am using HELIUM Roms. Please help. Error message is:
The filename, directory name, or volume label is incorrect.(0x8007007b: Open programmer "MPRG*.hex").
I have no clue. Not my first time flashing ROMs or unbricking a phone. It is my first time on a Xiaomi. Only done blackberry and samsung before.
hammer77 said:
How do I put the phone into fastboot mode if it is hard bricked? It won't turn on, I get no responce from phone. When I use method connecting test point to metal cover on mother board of phone usb connects to PC and MiFlash recognizes phone. Try to flash though and I get an error message. No matter what ROM I use, zipped, unzipped or tgz file. Can my phone be unbricked? What am I doing wrong? I have a Mi Max 64GB and am using HELIUM Roms. Please help. Error message is:
The filename, directory name, or volume label is incorrect.(0x8007007b: Open programmer "MPRG*.hex").
I have no clue. Not my first time flashing ROMs or unbricking a phone. It is my first time on a Xiaomi. Only done blackberry and samsung before.
Click to expand...
Click to collapse
did you solve the problem ?
Rajdip said:
Recently while flashing alpha version of MIUI marshmallow on my Mi 4w, my phone got completely bricked. Complete brick in the sense, it won't turn on, neither charge nor show any led indication. This guide should work on other phones also.Let's start:-
1) Although it seems like your phone wont turn on, your phone is actually working, it's just it wont show anything on the screen(no display).
Make sure your phone is charged properly(it will charge even if the led doesn't show any indication).
2) Download and install Mi flash tool and then Fastboot file of your device. http://en.miui.com/a-234.html
3) Unzip the fastboot image, a folder containing flash all.bat should appear if not, extract the extracted file again. Winrar should work fine.
4) Now open Mi flash tool(as administrator) and select the fastboot folder from Mi flash using browse option and also select the proper fastboot script according to need.
Note: Flash_all.bat will completely erase your internal storage.
5) Now press volume down(-) and power key to enter into fastboot. Note: it won't show any visual whatsoever but it'll work.
6) Connect your phone to your pc. It should show various flash devices connected to your computer and those devices may continuosly connect and disconnect. If not it'll show QHUSUB_BULK install the driver using device manager.
7) On Mi flash tool, some device name should show on the devices list if not click refresh and try reconnecting the device. Note: If you dont have proper drivers installed on your pc, this procedure won't work.
8) Finally click on flash and flashing will start. It'll take some time. Once done it'll show operation completed successfully.
9) Finally boot your device using power key.
Click to expand...
Click to collapse
Link not working.
Using another mi flash tool also get nothing. How do I know I get into fastboot?
Already pressed volume down and power button but nothing happened. And checking fastboot devices nothing comes up. Also in mi flash tool nothing.
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
EFAYSAL said:
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
Click to expand...
Click to collapse
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
SubwayChamp said:
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
Click to expand...
Click to collapse
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
EFAYSAL said:
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
Click to expand...
Click to collapse
Ok, I guess that your device is actually in bootloop and don´t booting.
Tutorial that you followed has many steps and don´t need to do all this to just root device and it contains some files like lk.bin that you can´t be sure that should be for your device.
Some users use this file (lk.bin) of an unlocked device and think that flashng in other device then get unlock it but no need, your device can be unlock it just follow some commands in fastboot mode.
Now you can do the next;
Try to flash again your rom stock (I guess that you don´t have a backup), if for some reason your official tool doesn´t work then use only some images like boot, system and userdata with the scatter.txt to flash them through SP Flash Tool.
Here a link to TWRP https://youtu.be/6vj_BY6xJdA, you can root it with supersu v2.78 0r v2.82 and here some files that can be usefull too https://drive.google.com/uc?id=0BwJgeCYTpnEHNlg2VUlieHFTYVU&export=download
Update steps that you are following to can assist. What extension has your rom and if it is recogniced for SP Flash Tool. I didn´t ask you if you can enter to fastboot mode and if you can then you can know if your bootloader is unlocked typing fastboot oem info
Most info that you give and some screenie will help to understand better
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
EFAYSAL said:
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
Click to expand...
Click to collapse
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
SubwayChamp said:
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
Click to expand...
Click to collapse
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
EFAYSAL said:
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
Click to expand...
Click to collapse
I´m not sure if you are connecting correctly your device at right time and form to can flash it properly. Every device has more or less a specific way to do it. My last alcatel it was connected just with device power off and after to tap on download, but in other device Blu Dash was connected pressing just vol_up and my last mt6757 Bluboo had to press both vol up and down at time to connect to pc and after to tap on download option. To have sure that is well done increase volume in your pc, you will hear a first sound that is cause pc is recognicing but then you have to hear a second sound that is when SPFlashTool is recognicing device and you will see a red line in down side of the tool window, release button inmediately and let tool to work.
This is a good rom for your device according the author is optimized https://droid1311.blogspot.com/2017/08/alcatel-fl02-aka-flash-plus-2-via.html and this is the link directly if you have troubles with pop-up-adds https://drive.google.com/file/d/0BwAGh1drb91SeDZwV1VXbXpjQWM/view
Also you can try with other versions of SP Flash Tool, most stable maybe should be v5,1628 https://androidmtk.com/smart-phone-flash-tool leth me know how you go
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
SPFlashTool 5.1628:
I try all the way with and without pressing any button but no luck . And when it work finishing with error.
SPFlashTool 5.1628:
I try all the way to get that mode but nothing works. So I try to click download button then conect the phone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
EFAYSAL said:
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
I try all the way to get that mode but nothing works. So I try to click download button then conect the pkone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
Click to expand...
Click to collapse
There is a part that is not variable in the way to use this tool, ever you have to tap on download before to connect device and is recommendable too connect cable usb to pc (not yet to device); from here is when the button that you have to press can vary but like I said you before in my last mt6757 (a very similar to yours) works pressing both vol at same time to connect terminal cable to device and now you will see a red line (could be violet-ish)
Try before just flashing only preloader file to recreate some partitions and then do other flash for the other files.
Of course you have to be sure that all drivers are installed correctly cause this tool needs to put your device in download mode (a special level) and also keep it in this state so find VCOM drivers for Alcatel and adb/fastboot installer and try to uninstalling some older drivers that you don´t use and many times we keep in our pcs and for a short data transmission can helo that all the rom move it in same folder where SPFlashTool is allocated.
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
EFAYSAL said:
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
Click to expand...
Click to collapse
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
- In what android version are you, 6.0?
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
- Did you try to flash just preloader, only this file?
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
SubwayChamp said:
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
Click to expand...
Click to collapse
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
SubwayChamp said:
- In what android version are you, 6.0?
Click to expand...
Click to collapse
Yes, last time it was 6.0 before the root
SubwayChamp said:
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
Click to expand...
Click to collapse
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
SubwayChamp said:
- Did you try to flash just preloader, only this file?
Click to expand...
Click to collapse
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
SubwayChamp said:
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
Click to expand...
Click to collapse
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
EFAYSAL said:
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
Yes, last time it was 6.0 before the root
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
Click to expand...
Click to collapse
You need to try two different ways to flash files and restore your device.
First method: fastboot mode
You need to get device enter to fastboot in order to flash some files like system, boot and userdata, then there are two main methods to do it:
- Pressing pwr + vol down
- And I mentioned that sometimes work pressing both volume button + pwr and a menu have to appear to can select an option to enter to (fastboot mode), in some devices this method is not working but you have to try several times attempting to.
Second method: SPFlashTool
You have to ever press first of all Download box and connect terminal cable to pc and the buttons thhat you need to press at time to connec cable usb to your device may vary, sometimes vol down, sometimes both vol but never pwr button; if pc recognice then you have to release all buttone an let it pc continue the flash process.
If SPFlashTool recognice device first flash only preloader file and select now lk.bin too. Flash only these two files and after do again a new flash with the rest of the files, Why you need to do this? your partitions are corrupted and you need to restore them with these files in order to can flash all another files.
Before all of this charge your battery, if you have a cover removable then extract it some minutes and put it again.
Also I read that for this model it´s used this tool instead of SPFlash Tool https://androidmtk.com/download-sugar-mtk-sp-flash-tool (inside the zip you will find a password to start the tool) but I´m not sure what kind of rom it needs, you have to connect your device to begin the process, you will find in product models section in the tool this variant for your device "FL02"
Try first the other tool and then this and let me know how you go, mtk devices are almost unbrickeable so it´s just to find the appropriate way to return it to the life.
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
EFAYSAL said:
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
Click to expand...
Click to collapse
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
I understand that you tried with Sugar tool with no lucky.
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Is there some custom development, recovery, roms for your device?
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
SubwayChamp said:
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
Click to expand...
Click to collapse
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
SubwayChamp said:
I understand that you tried with Sugar tool with no lucky.
Click to expand...
Click to collapse
Yes. After recognizing it keeps trying to download data but no luck.
SubwayChamp said:
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Click to expand...
Click to collapse
I know it is disappointing!. I try this but no luck.
SubwayChamp said:
Is there some custom development, recovery, roms for your device?
Click to expand...
Click to collapse
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
SubwayChamp said:
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
Click to expand...
Click to collapse
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
EFAYSAL said:
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
Yes. After recognizing it keeps trying to download data but no luck.
I know it is disappointing!. I try this but no luck.
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
Click to expand...
Click to collapse
I´ll tell you some ideas with no any specific order that you can try or see if works.
Really very strange that display stays in black, you told me that flashing files through fastboot is working but doesn´t appear not even bootlogo, connect to pc as it is and see how pc recognices in devices manager and my pc if appears like a determined drive d/e/f so it looks that some bad flashing burn your kernel and this case is similar to when a Samsung device need to use jtag method to revive, if in your country no-one knows about Alcatel devices this could be a similar case to what I´m saying then it could be a clue for a technician. I tell you this cause many time ago when I flashed by error a Samsung s4 and only this method revived my device.
Try this, flash your stock recovery only through SPFlash tool and flash after through Alcatel Download tool your stock rom cause some firmwares need to detect stock recovery first to can flash other partitions.
At this stage don´t you have stock recovery, no? so you can try to format data cause sometimes when bootloader is altered then avoid to boot and formatting data can solve this.
If this recovery twrp is for your device you can try flashing through SPFlash tool, you have to put recovery.img and scatter-txt in a same folder. then if succesfull format data, system, wipe cache and dalvik and maybe later try to port some custom rom would be a way to solve this.
To flash any partition through fastboot this is the syntax, just follow one by one any of the files that are in your rom folder so just follow these, if some of then can´t be flashed don´t worry then it´s not flashable:
fastboot flash boot bot.img
fastboot flash cache cache.img
fastboot flash lk lk.bin
and so on till the end
...But after try this if you didn´t get boot to recovery and obviously you can´t delete data nor system then delete first the next partitions trough fastboot typing:
fastboot erase system
fastboot erase cache
fastboot erase userdata
fastboot erase boot
Try all this and let us see how it goes
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
EFAYSAL said:
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
View attachment 4518365
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
Click to expand...
Click to collapse
I see that Sugar tool detects your device like rooted and refuses to flash anything, compare imei number which is in the box, I hope that it couldn´t be changed.
Don´t tell me simply no luck, what it says in SPFlash tool when you tried to flash TWRP and I guess that you put scatter-txt and twrp renamed recovery.img simply in the same folder. Just to be clear, to can flash with this tool your device it has to be off not needed fastboot for this. (provide some screenie)
Other combination of keys to enter to fastboot to flash some partitions when something is missing is, try these three ways:
- Pressing only vol down and at same time connecting to charger (connect first one terminal of cable to your device and then to the charger)
- Pressing the three buttons till a menu appears (you must to release inmediately all)
- Pressing vol up + pwr till a menu appears (you must to release pwr button inmediately) then choose fastboot
In the post 4 I provided a link from Google Drive, in this zip there are 8 items;
- From the item 2 use this version of SP Flash tool, put the four files in a folder and flash them
- In the item 3 you will find some scripts for fastboot, maybe they´re working better and also you have here a subfolder with twrp image.
- And if you get sucessfully install twrp in the item 7 there is a backup with some files to restore from this recovery.
Try one by one and update the info, I hope that your motherboard is not damaged.
This is a last ditch effort to restore your phone to working order. This should only be used if your phone DOES NOT BOOT AT ALL or if you are unable to boot into FASTBOOT.
If you can boot into Fastboot mode then I would encourage you to flash using Mi Flash tool.
Original video credits: Om Bob Ombreker
Tools Needed:
MTK Bypass Tool
SP Flash Tools
Fastboot ROM ( Around 3GB Download)
PC and USB cable
Download files here:
Tested! Howto Unbrick Redmi 9C (angelica) without using auth account
This blog has move and will not be update again.For new update please open ▶▶
langithitam.wordpress.com
First you need to extract the MTK bypass tool which is crucial as it will allow us to flash without requiring Auth file. NOTE: you need to disable antivirus or it will delete file.
Your PHONE NEEDS TO BE OFF! There is no need to unplug battery from the phone, I tested it myself and as long as the phone is OFF it'll still work. If your phone cannot power down due to bootloop, then you must remove backcover and unplug battery or just wait till battery runs out.
Once you have started the MTK bypass tool, choose MTK6765 from option that says auto and this is only for Redmi 9C. Now press on the bypass button a ad it will wait for you to connect your phone via USB. DO NOT CONNECT YOUR PHONE PRIOR TO THIS. Hold only the VOLUME UP button when connecting the USB cable to your phone and ensure the phone is OFF. ONCE you connect the phone, it will immediately respond and show a log saying its completed (SEE SCREENSHOT BELOW).
Once this step is completed leave your phone connected as you will soon start the flashing process. Open up SP FLASH TOOLS and run as admin. You will need to load the scatter file which is included in the Fastboot ROM under images folder. Once you have the scatter file loaded, SP tools will proceed to load all image files which will be used to flash phone so be patient.
Ensure that DOWNLOAD ONLY option is chosen as format and download option will format your IMEI also. Once all files have been loaded then just press the DOOWNLOAD button and wait to complete. Once done you can power ON the phone and it should boot.
Very good guide.
Thank you very much
No problem hope it'll help a few guys out there sure helped me a lot
Thanks 100% it worked for me
Munemugo said:
Thanks 100% it worked for me
Click to expand...
Click to collapse
Cool glad I could help
I'm using a Redmi 9c I tried to unlock it but failed in the process. Later I get absolutely no response from the phone, I cant open fast boot or recovery. I tried connecting it to the pc but it shows the same exact problem you are facing. I tried all USB ports and switched cables back and forth but no success. I tried pressing volume up, down and all sorts of combinations, still no success. Any fix for this?
Cat8191 said:
I'm using a Redmi 9c I tried to unlock it but failed in the process. Later I get absolutely no response from the phone, I cant open fast boot or recovery. I tried connecting it to the pc but it shows the same exact problem you are facing. I tried all USB ports and switched cables back and forth but no success. I tried pressing volume up, down and all sorts of combinations, still no success. Any fix for this?
Click to expand...
Click to collapse
Follow the guide step by step, it should work and if doesn't then you should try disconnecting the battery
great guide on fixing a hard brick.
My compliments and thank you very much indeed to you for writing this very good and detailed guide. My Redmi 9c bootlooped after trying to install Lineage OS, of course no way to go to fastboot mode anymore (I'm a rather experienced custom ROM installer though). Although I asked for help in a separate thread, I got no answer for a couple of months now until I found this thread. I never gave up my Redmi 9C so I now followed you instructions and with success!! I will refer people to your thread of course. There is no doubt many can save their phone by reading you instructions.
JoostA said:
My compliments and thank you very much indeed to you for writing this very good and detailed guide. My Redmi 9c bootlooped after trying to install Lineage OS, of course no way to go to fastboot mode anymore (I'm a rather experienced custom ROM installer though). Although I asked for help in a separate thread, I got no answer for a couple of months now until I found this thread. I never gave up my Redmi 9C so I now followed you instructions and with success!! I will refer people to your thread of course. There is no doubt many can save their phone by reading you instructions.
Click to expand...
Click to collapse
Thanks my guy appreciate the appreciation. Glad I could help
Dawood99 said:
This is a last ditch effort to restore your phone to working order. This should only be used if your phone DOES NOT BOOT AT ALL or if you are unable to boot into FASTBOOT.
If you can boot into Fastboot mode then I would encourage you to flash using Mi Flash tool.
Original video credits: Om Bob Ombreker
Tools Needed:
MTK Bypass Tool
SP Flash Tools
Fastboot ROM ( Around 3GB Download)
PC and USB cable
Download files here:
Tested! Howto Unbrick Redmi 9C (angelica) without using auth account
This blog has move and will not be update again.For new update please open ▶▶
langithitam.wordpress.com
First you need to extract the MTK bypass tool which is crucial as it will allow us to flash without requiring Auth file. NOTE: you need to disable antivirus or it will delete file.
Your PHONE NEEDS TO BE OFF! There is no need to unplug battery from the phone, I tested it myself and as long as the phone is OFF it'll still work. If your phone cannot power down due to bootloop, then you must remove backcover and unplug battery or just wait till battery runs out.
Once you have started the MTK bypass tool, choose MTK6765 from option that says auto and this is only for Redmi 9C. Now press on the bypass button a ad it will wait for you to connect your phone via USB. DO NOT CONNECT YOUR PHONE PRIOR TO THIS. Hold only the VOLUME UP button when connecting the USB cable to your phone and ensure the phone is OFF. ONCE you connect the phone, it will immediately respond and show a log saying its completed (SEE SCREENSHOT BELOW).
Once this step is completed leave your phone connected as you will soon start the flashing process. Open up SP FLASH TOOLS and run as admin. You will need to load the scatter file which is included in the Fastboot ROM under images folder. Once you have the scatter file loaded, SP tools will proceed to load all image files which will be used to flash phone so be patient.
Ensure that DOWNLOAD ONLY option is chosen as format and download option will format your IMEI also. Once all files have been loaded then just press the DOOWNLOAD button and wait to complete. Once done you can power ON the phone and it should boot.
Click to expand...
Click to collapse
I can do this for a Redmi 9a?
Using the same download agent
Hello, i did it but i did the mistake to do a FORMAT AND DOWNLOAD.
No my phone juste diplsay the Redmi logo a few second then power off.
I'm still able to go on the Sp Flash Tools and flash again. Anyone could help me please ?
hello sir so i recently hard bricked my redmi 9c nfc by installing older MIUI version that it came with. It was just black screen all the time and nothing. Tried this guide, mtk bypass tool worked but on sp flash tools i am greeted with this message.
Everything is acting like expected according to the video, but wheb I have used the mediatek bypass tool with green OK and stuff and when i start to press download on the smart phone flash tool, it just stucks at 0. Nothing happens, except that everything is greyed out and is trying to load it. If i boot my phone myself with the brom it says hint:add a authentication file or ask for help. I cant manage to finish it.
The error in Mediatek bypass tool about handshaking error is probably because i did it several times, because i didnt manage to load smartphone flash tool as attached below
This is my last hope to recover my brandew phone. Thanks for the good tutorial, but it didt work out. If someone could save me then I would be grateful
erikmanner said:
Everything is acting like expected according to the video, but wheb I have used the mediatek bypass tool with green OK and stuff and when i start to press download on the smart phone flash tool, it just stucks at 0. Nothing happens, except that everything is greyed out and is trying to load it. If i boot my phone myself with the brom it says hint:add a authentication file or ask for help. I cant manage to finish it.
The error in Mediatek bypass tool about handshaking error is probably because i did it several times, because i didnt manage to load smartphone flash tool as attached below
This is my last hope to recover my brandew phone. Thanks for the good tutorial, but it didt work out. If someone could save me then I would be grateful
Click to expand...
Click to collapse
I had exactly the same issue, go into the me
Go into the options menu and go to connections, then select usb, then do the steps as is
Dawood99 said:
This is a last ditch effort to restore your phone to working order. This should only be used if your phone DOES NOT BOOT AT ALL or if you are unable to boot into FASTBOOT.
If you can boot into Fastboot mode then I would encourage you to flash using Mi Flash tool.
Original video credits: Om Bob Ombreker
Tools Needed:
MTK Bypass Tool
SP Flash Tools
Fastboot ROM ( Around 3GB Download)
PC and USB cable
Download files here:
Tested! Howto Unbrick Redmi 9C (angelica) without using auth account
This blog has move and will not be update again.For new update please open ▶▶
langithitam.wordpress.com
First you need to extract the MTK bypass tool which is crucial as it will allow us to flash without requiring Auth file. NOTE: you need to disable antivirus or it will delete file.
Your PHONE NEEDS TO BE OFF! There is no need to unplug battery from the phone, I tested it myself and as long as the phone is OFF it'll still work. If your phone cannot power down due to bootloop, then you must remove backcover and unplug battery or just wait till battery runs out.
Once you have started the MTK bypass tool, choose MTK6765 from option that says auto and this is only for Redmi 9C. Now press on the bypass button a ad it will wait for you to connect your phone via USB. DO NOT CONNECT YOUR PHONE PRIOR TO THIS. Hold only the VOLUME UP button when connecting the USB cable to your phone and ensure the phone is OFF. ONCE you connect the phone, it will immediately respond and show a log saying its completed (SEE SCREENSHOT BELOW).
Once this step is completed leave your phone connected as you will soon start the flashing process. Open up SP FLASH TOOLS and run as admin. You will need to load the scatter file which is included in the Fastboot ROM under images folder. Once you have the scatter file loaded, SP tools will proceed to load all image files which will be used to flash phone so be patient.
Ensure that DOWNLOAD ONLY option is chosen as format and download option will format your IMEI also. Once all files have been loaded then just press the DOOWNLOAD button and wait to complete. Once done you can power ON the phone and it should boot.
Click to expand...
Click to collapse
I cannot thank you enough, thank you for putting this here
Works with some tweaks but got it running
Thank You soooo much for this tutorial, it worked for me and saved me alot of trouble.
i want to ask one thing: can this method be used on a locked bootloader?
Mr.PotatoChips said:
Thank You soooo much for this tutorial, it worked for me and saved me alot of trouble.
i want to ask one thing: can this method be used on a locked bootloader?
Click to expand...
Click to collapse
yes
I need help, after I used the Bypass MTK, my phone became unrecognizable by windows. It says Unknown USB Device.
bbboy4life said:
I need help, after I used the Bypass MTK, my phone became unrecognizable by windows. It says Unknown USB Device.
Click to expand...
Click to collapse
Install usb dk drivers 32bit or 64bit, install usb win32 tool
Hi guys sadly I completely softbricked my motorola X40 phone i'm a idiot.
I flashed to a wrong firmware file (edge 30 pro) and re-locked bootloader then found it phone doesn't properly boot anymore.
I can boot it in fastboot mode but flashing in normal fastboot mode doesn't work with locked bootloader and lenovo rescue tool can't help me either.
Edit: Weirdly I managed to boot it up and it shows as a "motorola edge 30 pro" and I can control my screen with a USB mouse.
But when I try to enable "OEM unlocking" in developer options the settings app just crashes.
But my problem stays the same, i'm still stuck with a locked bootloader
Is there any chance to trick this phone into EDL mode or any working blankflash?
Any suggestions? i'd appreciate it
jody2k said:
Hi guys sadly I completely softbricked my motorola X40 phone i'm a idiot.
I flashed to a wrong firmware file (edge 30 pro) and re-locked bootloader then found it phone doesn't properly boot anymore.
I can boot it in fastboot mode but flashing in normal fastboot mode doesn't work with locked bootloader and lenovo rescue tool can't help me either.
Edit: Weirdly I managed to boot it up and it shows as a "motorola edge 30 pro" and I can control my screen with a USB mouse.
But when I try to enable "OEM unlocking" in developer options the settings app just crashes.
But my problem stays the same, i'm still stuck with a locked bootloader
Is there any chance to trick this phone into EDL mode or any working blankflash?
Any suggestions? i'd appreciate it
Click to expand...
Click to collapse
It doesn't matter if the oem lock is on to flash the stock firmware.
You can directly flash the right firmware via fastboot. Lenovo rescue tool may not flash...
cascade128 said:
It doesn't matter if the oem lock is on to flash the stock firmware.
You can directly flash the right firmware via fastboot. Lenovo rescue tool may not flash...
Click to expand...
Click to collapse
Hi thanks for the response, how to flash directly stock firmware? which method should I use? This is what I get when I try to flash anything through adb (phone in fastboot mode) I added a screenshot from adb in windows and took a picture from my phone to show in which fastboot mode it shows.
Tried several things flashing directly from adb but it always says permission denied because of the bootloader lock, maybe i'm doing something wrong.
It's not adb, it's fastboot mode.
Where you are is right.
It will be in the mode in the screenshot of the device, that's right.
Use the one in the file i gave you.
Here are the guidelines.
01. Download the latest Firmware from lolinet
02. We extract the firmware.zip, open servicefile.xml and copy the contents into this website
03. Download the mfastboot.rar ADB i gave and put it in the rom folder you extracted.
04. We put the flashfile.bat we created (Step 02. Extract, open servicefile.xml and copy the content to this site) into the rom folder you extracted.
05. Reboot your phone into fastboot (adb reboot fastboot or press and hold Power + Volume Down)
06. Everything is ready, click on the ''flashfile.bat'' file.
07. Don't disconnect the phone until the update has finished.
cascade128 said:
It's not adb, it's fastboot mode.
Where you are is right.
It will be in the mode in the screenshot of the device, that's right.
Use the one in the file i gave you.
Here are the guidelines.
01. Download the latest Firmware from lolinet
02. We extract the firmware.zip, open servicefile.xml and copy the contents into this website
03. Download the mfastboot.rar ADB i gave and put it in the rom folder you extracted.
04. We put the flashfile.bat we created (Step 02. Extract, open servicefile.xml and copy the content to this site) into the rom folder you extracted.
05. Reboot your phone into fastboot (adb reboot fastboot or press and hold Power + Volume Down)
06. Everything is ready, click on the ''flashfile.bat'' file.
07. Don't disconnect the phone until the update has finished.
Click to expand...
Click to collapse
Hi thanks for helping me, I downloaded the right firmware, uploaded the servicefile.xml to the site you gave me and created the flashfile.bat. Pasted the flashfile.bat into the samen folder as the rom and also extracted the mfastboot.rar into the same rom folder.
Then clicked on the flashfile.bat but sadly I get the same error's (Permission Denied)
My phone is still in fastboot mode (right screenshot)
Any idea's?
jody2k said:
Hi thanks for helping me, I downloaded the right firmware, uploaded the servicefile.xml to the site you gave me and created the flashfile.bat. Pasted the flashfile.bat into the samen folder as the rom and also extracted the mfastboot.rar into the same rom folder.
Then clicked on the flashfile.bat but sadly I get the same error's (Permission Denied)
My phone is still in fastboot mode (right screenshot)
Any idea's?
Click to expand...
Click to collapse
Very interesting, it shouldn't give such an error. You are flashing Motorola signed images, you don't need the bootloader unlocked for this Sorry i can't be of more help, i hope you can recover your device...
cascade128 said:
Very interesting, it shouldn't give such an error. You are flashing Motorola signed images, you don't need the bootloader unlocked for this Sorry i can't be of more help, i hope you can recover your device...
Click to expand...
Click to collapse
Yea indeed well thanks anyway, my only hope left is a third party recovery tool that supports this phone in future.
I'll put the X40 in my closet until then and buy another new phone in the meanwhile don't have much of a choice lol.
Hello!
Did you try RSDLite tool to flash firmware?
thunderman75 said:
Hello!
Did you try RSDLite tool to flash firmware?
Click to expand...
Click to collapse
I tried but the issue is there that it doesn't detect the port / device on the RSDlite tool.
Meanwhile I can see in devicemanager in windows the phone is detected in ADB/fastboot mode but RSDlite tool needs some portmode to succeed, the tool says it doesn't detect my device. I can't seem to connect it with that port RSDlite tool needs, also tried general ADB drivers but didn't help either. I also saw in one topic to make it work with RSD tool you need to install the qualcomm drivers, but these drivers don't work with this phone in normal fastboot mode. In other words I can't seem to RSD tool recognise my phone on the needed port. I think this tool only works in EDL mode (+qualcomm driver) but my moto X40 doesn't yet support EDL mode I think.
https://androidmtk.com/use-rsd-lite-tool
=> I followwed this tutorial but @ Step nr.8 there isn't any port or device detected even when my phone is correctly in fastboot mode
I tried Generic ADB drivers and the official motorola USB drivers, both detected in devicemanager in windows but RSDtool lite didn't detect my phone.
jody2k said:
I tried but the issue is there that it doesn't detect the port / device on the RSDlite tool.
Meanwhile I can see in devicemanager in windows the phone is detected in ADB/fastboot mode but RSDlite tool needs some portmode to succeed, the tool says it doesn't detect my device. I can't seem to connect it with that port RSDlite tool needs, also tried general ADB drivers but didn't help either. I also saw in one topic to make it work with RSD tool you need to install the qualcomm drivers, but these drivers don't work fastboot mode. In other words I can't seem to RSD tool recognise my phone on the needed port. I think this tool only works in EDL mode (+qualcomm driver) but my moto X40 doesn't yet support EDL mode I think.
https://androidmtk.com/use-rsd-lite-tool
=> I followwed this tutorial but @ Step nr.8 there isn't any port or device detected even when my phone is correctly in fastboot mode
I tried Generic ADB drivers and the official motorola USB drivers, both detected in devicemanager in windows but RSDtool lite didn't detect my phone.
Click to expand...
Click to collapse
This looks promising:
Motorola Unbrick Tool: Unbrick any Moto Device via EDL Mode
In this comprehensive guide, we will show you the detailed steps to unbrick any Motorola device booted to EDL Mode using the Unbrick Tool.
droidwin.com
thunderman75 said:
This looks promising:
Motorola Unbrick Tool: Unbrick any Moto Device via EDL Mode
In this comprehensive guide, we will show you the detailed steps to unbrick any Motorola device booted to EDL Mode using the Unbrick Tool.
droidwin.com
Click to expand...
Click to collapse
Yeah let's hope my device model (X40) get's support soon
@mark332 Any idea's?
I have the same problem, because I did the same thing hahaha, I tried these methods and nothing was successful, I tried to use Lenovo's RSA, but it only installs the correct firmware and Fastboot, but when it comes to rescuing it just has a "Warning" message.
zequinhaBR said:
I have the same problem, because I did the same thing hahaha, I tried these methods and nothing was successful, I tried to use Lenovo's RSA, but it only installs the correct firmware and Fastboot, but when it comes to rescuing it just has a "Warning" message.View attachment 5872305
Click to expand...
Click to collapse
Guess we are in the same boat loll xp having indeed the exact same message. I think the RSA tool detects the right device but it checks for some sort of keys/verification and sees it isn't the right firmware so it stops flashing.
I have found out you can also enter recovery mode by selecting "recovery" in fastboot mode with the key buttons.
Then you need to press power button + down key for 3 seconds, then short the volume up key.
Youll get a other menu with also fastboot mode and adb sideload etc...
but again sadly neither fastboot or adb sideload did work for me
When I tried to flash the original firmware in sideload mode trough ADB it gives a"verification error"
In fastboot mode it says that it can't flash with locked device
I hope this info will be any useful for people stumble upon this topic in the future and maybe help to unbrick this phone.
jody2k said:
I tried but the issue is there that it doesn't detect the port / device on the RSDlite tool.
Meanwhile I can see in devicemanager in windows the phone is detected in ADB/fastboot mode but RSDlite tool needs some portmode to succeed, the tool says it doesn't detect my device. I can't seem to connect it with that port RSDlite tool needs, also tried general ADB drivers but didn't help either. I also saw in one topic to make it work with RSD tool you need to install the qualcomm drivers, but these drivers don't work with this phone in normal fastboot mode. In other words I can't seem to RSD tool recognise my phone on the needed port. I think this tool only works in EDL mode (+qualcomm driver) but my moto X40 doesn't yet support EDL mode I think.
https://androidmtk.com/use-rsd-lite-tool
=> I followwed this tutorial but @ Step nr.8 there isn't any port or device detected even when my phone is correctly in fastboot mode
I tried Generic ADB drivers and the official motorola USB drivers, both detected in devicemanager in windows but RSDtool lite didn't detect my phone.
Click to expand...
Click to collapse
New hope on horizont for your phone...Machine with Windows10(32-bit) and Moto USB drivers(32-bit).
Phone booted in fastboot mode and connected to PC,recognized instantly.
Screenshot of my Moto Edge 30 ultra connected to above mentioned PC.
Good luck!!!
thunderman75 said:
New hope on horizont for your phone...Machine with Windows10(32-bit) and Moto USB drivers(32-bit).
Phone booted in fastboot mode and connected to PC,recognized instantly.
Screenshot of my Moto Edge 30 ultra connected to above mentioned PC.
Good luck!!!
Click to expand...
Click to collapse
Hey man thanks for your response, sadly i'm on a 64bit windows 11 version. Would it be any different than the 64bit driver vs 32bit you think? Because have tried this several times can't get RSD lite detect my phone . In device manager it's detected first as "fastboot rtwo s" and when the moto 64bit driver is installed it's detected as "motorola ADB interface" so it's correctly detect by the system.
My phone is also in fastboot mode never the less RSD lite tool doesn't detect anything
Guess I could try to install windows 10 32bit i'll keep this updated
jody2k said:
Hey man thanks for your response, sadly i'm on a 64bit windows 11 version. Would it be any different than the 64bit driver from motorola you think? Because have tried this several times can't get RSD lite detect my phone . In device manager it's detected first as "fastboot rtwo s" and when the moto 64bit driver is installed it's detected as "motorola ADB interface" so it's correctly detect by the system.
Never the less RSD lite tool doesn't detect anything
On which mode is your edge 30 phone, fastboot or edl?
Click to expand...
Click to collapse
I also have 64 bit Win11 machine with RSD Lite installed and it can't detect phone.
But when I connect it to my old laptop(Win10-32 bit,RSD Lite) phone is detected instantly.
Try to find someone who has machine with 32 bit Windows and try to rescue your phone.
Tip from professionals: RSD Lite works best with older version of a 32 bit Windows...
thunderman75 said:
I also have 64 bit Win11 machine with RSD Lite installed and it can't detect phone.
But when I connect it to my old laptop(Win10-32 bit,RSD Lite) phone is detected instantly.
Try to find someone who has machine with 32 bit Windows and try to rescue your phone.
Tip from professionals: RSD Lite works best with older version of a 32 bit Windows...
Click to expand...
Click to collapse
Just tried on my older 32bit computer with windows 10 and installed the 32bit driver for motorola. Sadly the issue is the same, RSD lite doesn't detect the moto x40. Where did you download the driver?
Motorola USB Driver for Windows 32-Bit/64-Bit - Driver Market
Download now the latest and official Motorola USB Driver for Windows. We shared the latest Motorola USB Driver for Windows.
www.drivermarket.net
Reinstall driver and restart PC(mandatory),it should work then.
thunderman75 said:
Motorola USB Driver for Windows 32-Bit/64-Bit - Driver Market
Download now the latest and official Motorola USB Driver for Windows. We shared the latest Motorola USB Driver for Windows.
www.drivermarket.net
Reinstall driver and restart PC(mandatory),it should work then.
Click to expand...
Click to collapse
Tried that too several times but thanks for the suggestion anyways.
Took my time also this evening to reinstall a clean windows 32bit version, installed 32bit moto driver again from your link.
Reboot, nope
Same issue, RSD lite doesn't detect anything while the driver and device is recognized in device manager whatever I tried last 2 weeks.
I also opened the phone and searched on the motherboard for EDL test points, no avail too.
I think the RSD tool lite or the usb driver needs a update for this device or someone needs to find out how to get this phone into EDL mode. This can take months maybe years who knows lol
I just gave up and bought myself a new phone (xiaomi 13)