[OFFICIAL][9.0]ProjectTitanium Beta ARM64 A-A/B[GSI][Update 02/07/2019] - Treble-Enabled Device Development A/AB ROMS

[OFFICIAL][9.0]ProjectTitanium Beta ARM64 A-A/B[GSI][Update 02/07/2019] - Treble-Enabled Device Development A/AB ROMS

A/B one does not boot on Xiaomi Mi 9 (Vendor used: Xiaomi.eu 9.5.30)
all other GSIs do boot with exact same procedure.

Mohammed779 said:
A/B one does not boot on Xiaomi Mi 9 (Vendor used: Xiaomi.eu 9.5.30)
all other GSIs do boot with exact same procedure.
Click to expand...
Click to collapse
Ah, damn. Let me see what I can do. Thanks for the report.
Could you give me any log?

Mohammed779 said:
A/B one does not boot on Xiaomi Mi 9 (Vendor used: Xiaomi.eu 9.5.30)
all other GSIs do boot with exact same procedure.
Click to expand...
Click to collapse
Same issue for same device.....

I will test it on s9+ and let u know if it boots or no

Update coming this night fixing hopefully all boot issues, even though on some devices it boots...
Regards,

ARM 64 A Only build boots fine on ZTE Axon 7. I had a quick browse through Settings, seems very barebones. I don't blame ya, you said yourself it's in beta. I'll keep an eye out for when you've had a chance to update it

Booted on s9+ but the rom is like stock aosp no features or anything, maybe because it is still on beta

Update 02/07/2019!
Good Evening! I'm back as I said, and here is the update for this ROM.
Changelog:
-Boot issues fixed!
-Vendor fixed!
-New stock wallpaper
-Fixed build number bug
-Other miscellaneous fixes
Download:Only A:
PTi-Beta-0.5-GSI-ARM64-A-OFFICIAL
A/B:
PTi-Beta-0.5-GSI-ARM64-AB-OFFICIAL
Best Regards!

A/B Build added to the update reply, now since the builds should work our team is going to start working on actually bringing features to this.
Hopefully sooner than you think.
Regards,

Akhayev said:
Booted on s9+ but the rom is like stock aosp no features or anything, maybe because it is still on beta
Click to expand...
Click to collapse
Would you please tell the Firmware and Vendor you are on . Thank you !

fares70 said:
Would you please tell the Firmware and Vendor you are on . Thank you !
Click to expand...
Click to collapse
Brk3 vendor , and firmware use the one u already using ,

XTutorials said:
A/B Build added to the update reply, now since the builds should work our team is going to start working on actually bringing features to this.
Hopefully sooner than you think.
Regards,
Click to expand...
Click to collapse
Do you mean this ROM is intended to be feature-rich like Havoc, Liquid, PixelDust...?

Boots on Blu Vivo XI.

Hello Goodnight.
I previously installed GSI roms.
but now I try to install with the usual procedure
for my G9600 S9
but I can not get into the system
it always stays in the logo and never passes from there.
I already wait more than 25 minutes and nothing.
- STEPS FOR INSTALLING GSIs:
Download the desired GSI (it MUST be A-only_arm64 Variant)
Unpack it if it wasn't in .IMG format
Wipe DATA, and reboot in TWRP
Go to TWRP , Install , Install IMAGE
Pick your GSI and select SYSTEM IMAGE
Install the kernel for GSI GSI Kernels
In TWRP mount System, then go to ADVANDED, File Manager, and delete this file: system/bin/rw_system.sh
Reboot system
What is wrong?

Technical said:
Do you mean this ROM is intended to be feature-rich like Havoc, Liquid, PixelDust...?
Click to expand...
Click to collapse
Well, we want to make something different from any other ROM, but yes, it will also have plenty of features enough to satisfy everyone, hopefully also reaching my intentions. We intent of bringing 1.0 this fall.
Regards,

hi Guys
I can not install a gapps twrp error 70 otherwise rome runs well and as always with my asus zenfone 5 ze620kl automatic brightness does not work ..
can you please build a rome with gapps.
Thank you

XTutorials said:
Well, we want to make something different from any other ROM
Click to expand...
Click to collapse
What do you mean?
Until May I was able to compile Bootleggers, Havoc and Liquid. Since then, sepolicy and other specific issues are blocking building or booting later. I like featured rich ROMs and I could help to compile Titanium, although my knowledge is not enough to help you, devs.
---------- Post added at 08:19 ---------- Previous post was at 08:14 ----------
barbaross said:
hi Guys
I can not install a gapps twrp error 70
Click to expand...
Click to collapse
In TWRP, just go to Wipe menu > Advanced Wipe > check System partition > Partition options > Resize FS. Then flash Gapps again.

Technical said:
What do you mean?
Until May I was able to compile Bootleggers, Havoc and Liquid. Since then, sepolicy and other specific issues are blocking building or booting later. I like featured rich ROMs and I could help to compile Titanium, although my knowledge is not enough to help you, devs.
Click to expand...
Click to collapse
Well, this ROM can be build as any other ROM, so anyone with some Linux knowledge should be able to build this, as any other ROM.
And soon accepting official maintenance!

mezacorleehone said:
Hello Goodnight.
I previously installed GSI roms.
but now I try to install with the usual procedure
for my G9600 S9
but I can not get into the system
it always stays in the logo and never passes from there.
I already wait more than 25 minutes and nothing.
- STEPS FOR INSTALLING GSIs:
Download the desired GSI (it MUST be A-only_arm64 Variant)
Unpack it if it wasn't in .IMG format
Wipe DATA, and reboot in TWRP
Go to TWRP , Install , Install IMAGE
Pick your GSI and select SYSTEM IMAGE
Install the kernel for GSI GSI Kernels
In TWRP mount System, then go to ADVANDED, File Manager, and delete this file: system/bin/rw_system.sh
Reboot system
What is wrong?
Click to expand...
Click to collapse
First you need BRK3 vendor , and flash aosp kernel not gsi , the best kernel is Endurance-Kernel-AOSP-1.2.30.zip
First, wipe system data cache and then flash vendor then flash the rom then flash kernel the magisk then reboot ot will work fine , no need to delete rw_system or anything

Related

[9.0][EXPERIMENTAL]Resurrection Remix v7.0 [blueline]

Warning: This is an untested unoffical build for the Pixel 3 (blueline), so please take caution in flashing and make a backup.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix P
Code:
[SIZE="4"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.
I am not a developer, I only build this ROM and it reflects the the current status of LineageOS / Resurrection Remix. If there are any device specific things missing or not working. I suggest to contact the LineageOS team, they are the real developers here and deserve all the credits.
First Installation
Installing the ROM can be a little hard, especially the first install. Upgrades will be relatively easy though. This first setup is only needed when coming from a different ROM then this. I can't support you if you did't follow this first installation. Be warned it will wipe your user data in the process, so make sure you make a backup if needed.
In order to make the right startbase for the ROM you have to install the latest stock Pixel 3 image from Google found here.
Place the ROM and optionally the TWRP zip, a kernel and root on the phone and reboot to recovery by using the command line (fastboot boot twrp.img) or hold the VOL DOWN key while rebooting the phone.
Wipe 'data' and 'Dalvik / Art Cache' from TWRP - Wipe - Advanced Wipe or use the slider in TWRP for a factory reset. Optionally you should also delete the Android folder on your internal storage through the TWRP File Manager
Flash the ROM and optionally the TWRP zip, kernel and root and reboot the phone
Upgrades to new version
After the hard initial work to get the ROM installed it's going to be easy for upgrades to new versions.
Download the new ROM on the phone and reboot or fastboot flash to the TWRP recovery
Flash the new ROM and optionally TWRP. If you want to flash another kernel or a root solution you will have to reboot you phone, so it switches slots and let it boot normally. Then go back to recovery and flash in this order: TWRP - kernel - Magisk and reboot
After a monthly update from Google and only when Resurrection Remix has also adapted to the latest monthly sources, you will have to do an extra step:
Download the latest Resurrection Remix ROM and place it on the internal storage
Download the latest image from the Google Factory Images site, extract the bootloader, radio and vendor images and flash them in the bootloader to both slots
From here go to TWRP recovery and flash the previously downloaded new ROM, optionally followed by TWRP.
Optionally, after a reboot you can flash Magisk and/or another kernel.
ROM Download
GApps are already included in the ROM
Resurrection Remix Source
Device Source
Kernel Source
Vendor Source
XDA Developers
LineageOs Team
Omni Team
And Of Course To All The Supporters, Donators And Users
- Active Edge
- Now playing
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the MatLog app from the Play Store.
After downloading the MatLog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into MatLog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.

turbolukex5 said:
Warning..
Click to expand...
Click to collapse
Is this ROM featuring OpenGapps, like the unofficial LineageOS 16.0 build(s) does?

xFirefly93 said:
Is this ROM featuring OpenGapps, like the unofficial LineageOS 16.0 build(s) does?
Click to expand...
Click to collapse
It features the gapps that come with the Dirty Unicorns ROM.

So excited to finally see RR on my pixel 3. Been a long wait
Thank you ?

Hey, your instructions confused me a little. Do we need to flash our own kernel of choice, or can we stick to the kernel that comes with the ROM?

retr0gr4d3 said:
Hey, your instructions confused me a little. Do we need to flash our own kernel of choice, or can we stick to the kernel that comes with the ROM?
Click to expand...
Click to collapse
You can do both.

I flashed your rom yesterday but got stuck on the bootscreen logo. I let it sit for 15 minutes & nothing.

Spider_Pig27 said:
I flashed your rom yesterday but got stuck on the bootscreen logo. I let it sit for 15 minutes & nothing.
Click to expand...
Click to collapse
This is the exact issue I had, which is why I asked about the kernel situation. It seems like people have had success, however I don't know whether those people flashed this build or not.
The instructions aren't exactly crystal clear.

retr0gr4d3 said:
This is the exact issue I had, which is why I asked about the kernel situation. It seems like people have had success, however I don't know whether those people flashed this build or not.
The instructions aren't exactly crystal clear.
Click to expand...
Click to collapse
I flashed it with a custom kernel & still didn't boot for me. I flashed it like I've been flashing other rooms. Didn't really do anything different or special with this one.

All is running well for most trying it out and that's why it is so quiet ??

Doesn't work, installed latest factory image, installed the ROM, TWRP, and Magisk (no custom kernel). Image fails to boot, stuck at boot image for about 10 minutes and then it kicks me back out to TWRP.

I'm also stuck on the start screen with the loading icon. Just installed RR and TWRP, nothing too special. Everything went perfectly until I attempted to boot. Is there anything I'm missing?

Sad to report same issue here..

To everyone with boot issues: please keep in mind that this is still an experimental built, bugs are to be expected. If you are able to pull some adb logs from the bootloop and post it here, the dev might actually be able to fix those nasty bootloops. This way, you can actually participate in the development process to make this ROM acessible for other members.

Portgas D. Ace said:
To everyone with boot issues: please keep in mind that this is still an experimental built, bugs are to be expected. If you are able to pull some adb logs from the bootloop and post it here, the dev might actually be able to fix those nasty bootloops. This way, you can actually participate in the development process to make this ROM acessible for other members.
Click to expand...
Click to collapse
I haven't tried this one yet but had the same problem in LineageOS. Stuck in the bootscreen. Not sure what it is.

Did the updates and development for blueline just stop with this. I cannot for the life of me find an update version of this.

eezdva said:
I haven't tried this one yet but had the same problem in LineageOS. Stuck in the bootscreen. Not sure what it is.
Click to expand...
Click to collapse
tjcalhoun1221 1 said:
Did the updates and development for blueline just stop with this. I cannot for the life of me find an update version of this.
Click to expand...
Click to collapse
I know the dev, he doesn't know how to fix this.
However, you can flash the RR 7.x.x GSI if you want. I'll leave detailed steps.
Do not I am not some sort of Pixel dev. I did these steps myself with help from a friend in the Proton Kernel team.
1) Boot to your TWRP
2) Flash avbctdisable.zip. It acts like a dm-verity disable afaik, however I can't remember where I found it. I think it's on the internet, I'll edit when I find it, or if I post it myself.
3) Boot to fastboot
4) Flash the stock boot.img from the latest P OTA (fastboot flash boot boot.img)
5) Flash your GSI (fastboot flash system system.img)
6) Flash TWRP temporarily (fastboot boot twrp.img)
7) Wipe your /data (wipe > advanced wipe > data > type "yes") but do NOT reboot yet
8) Flash TWRP installer (blueline/crosshatch respectively, then reboot back to TWRP)
9) Flash your GApps, Magisk and/or kernel
9.1) If this doesn't work (/system isn't big enough) then put "resize2fs /dev/block/by-name/system$(getprop ro.boot.slot_suffix)" into adb shell. It will make /system bigger for GApps.
10) Reboot and you should have RR 7.x.x GSI working.

[ROM][PIE-9.0][UNOFFICIAL] Cosmic-OS v4.0 - Corona (FBE) [2019/09/03]

[ROM][PIE-9.0][UNOFFICIAL] Cosmic-OS v4.0 - CORONA [Angler][2019/09/03]
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Cosmic-OS is a Custom ROM based on Android Open Source Project (AOSP) with additional features, performance and battery life improvements.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instructions for flashing:
Download ROM and GApps.
Copy ROM and GApps to internal storage.
Wipe /data, /system and /cache.
Flash ROM and GApps
Enjoy
Note: First boot and boots after every update can take some time. They may even loop a few times. We do not support custom kernels or mods like MultiROM. If you have an issue, make sure your edits aren't interfering with the issue you're reporting.
ROM
GAPPS
For GAPPS visit the site, select ARM64 in the Platform section, 9.0 in the Android section & in the Variant section choose the type of package you want to install.
Credits
- @sagarshah1729 (Founder/Lead Developer)
- @Sid_Sun (Contributor)
- @Agent_fabulous (Contributor)
- Nitrogen Project
- LineageOS
- AOSCP
- OmniROM
- ABC ROM
- Dirty Unicorns
- Kabou Zeid for Phonograph
Have a feature request? Don't spam here. Visit our Google Plus community or Telegram group
Cosmic-OS Official Website:
Cosmic-OS
Cosmic-OS Google Plus community:
G+
Cosmic-OS Official Telegram group:
Telegram
Support Us
Hello, Gracious human! if you like our work, you may support us by donating:
Paypal
PayTMXDA: DevDB Information
CosmicOS Pie, ROM for the Huawei Nexus 6P
ROM OS Version: 9.x Pie
ROM Firmware Required: TWRP, Unlocked bootloader
Based On: AOSP
Version Information
Status: Stable
Build Date:2019/09/03
Contributors
@PixelBoot (helping me out) @beingmishra (source and server) @amallxw
Rom Source: https://github.com/Cosmic-OS/

A few notes before you proceed:
Before going straight to the downloading, there’s something we would like to tell you. We have changed the default encryption method for the phone, migrating to File-Based Encryption (you can get more information from the official Google documentation page). In order to get this encryption mode working, you will need to use our custom recovery (compiled from the latest source) which is compatible with this encryption and, just for the first time, you will have to wipe your internal data, so backup your data before proceeding.

Installation Instructions:
Grab our recovery and install it.
Through TWRP Recovery:
Install Zip > Install Image > Choose ‘recovery.img‘ > Select partition ‘Recovery’ > Swipe to confirm flash
Through Fastboot:
Code:
fastboot flash recovery recovery.img
Install the ROM and then wipe your internal data partition.
Through TWRP Recovery:
Wipe > Format data
Through Fastboot:
Code:
fastboot -w
Reboot into system and wait until the process finishes, it could take a little bit. After the installation is done, I suggest waiting before using the phone because it usually goes into thermal throttling after installing a ROM.

Is this system-as-root? I'm BLOD and patch won't work if it is!
Sent from my Nexus 6P using XDA-Developers Legacy app

bigcelo75 said:
Is this system-as-root? I'm BLOD and patch won't work if it is!
Click to expand...
Click to collapse
This is system-as-root
we made a build for 4core devices with the patch but there few features which don't work.
I'll be building EvolutionX in few days.
I'll try not to make it SAR so that you can flash the blod patch

amallxw said:
This is system-as-root
we made a build for 4core devices with the patch but there few features which don't work.
I'll be building EvolutionX in few days.
I'll try not to make it SAR so that you can flash the blod patch
Click to expand...
Click to collapse
I appreciate that my friend. Looking forward to it![emoji6]
Sent from my Nexus 6P using XDA-Developers Legacy app

Installed it with no issues and so far so good. It's a complete rom, has everything i need even gray scale reading mode. Didn't notice any battery drain for now, but still i always enable agrressive sleep and standby. Will give any further thoughts after i used it for a while. The onyl thing is that the simple gapps do not work on this rom, had to use open gapps.

sage of six paths said:
Installed it with no issues and so far so good. It's a complete rom, has everything i need even gray scale reading mode. Didn't notice any battery drain for now, but still i always enable agrressive sleep and standby. Will give any further thoughts after i used it for a while. The onyl thing is that the simple gapps do not work on this rom, had to use open gapps.
Click to expand...
Click to collapse
aight
?

Oke so my review in short. The rom is as most roms just fine. For my usage i have no bugs to report. The only slight potential donwside might be that the battery life was not as good as on pixy or superior os, but its not far behind. However this might be due to, I've used a lot more lte with this rom than on those since I'm back to work form vacation, and second that my battery might be giving me slight signs it'll need a replacement soon. So take the battery thing with a grain of salt, try it your self first and compare.

Is there a feature list for this rom?

MaddScientist said:
Is there a feature list for this rom?
Click to expand...
Click to collapse
check website?

Hi, thanks for the ROM, runs great from the short time I had on it (forgot to get gapps package) when I got opengapps 9.0 stock it said that the ROM needed opengapps for 8.1, same with Pico, pretty confusing. Any help would be great

Gapps issue
I even tried Simple Gapps, thinking maybe they would work. Will try 8.1, but it definitely won't use 9.0 gapps. BTW, I downloaded the nano gapps. Other than that, this rom is absolutely beautiful. It is fast, and it is just a very good-looking rom. So, I hope you keep working on this. I can't say enough about how quick it is. So, thanks, and I hope the gapp thing can be worked out. Okay, what ended up working was ARM 8.1 gapps. NOT arm 64. Not sure why or how. Just FYI. Thanks.

I shall be trying this ROM out soon. I have to flash gapps 9.0 arm 64?

sufy1000 said:
I shall be trying this ROM out soon. I have to flash gapps 9.0 arm 64?
Click to expand...
Click to collapse
Yes,,,flashed it today ,, Currently using it

abdullahk6809 said:
Yes,,,flashed it today ,, Currently using it
Click to expand...
Click to collapse
I just tried to flash 9.0 pico package. It said it was the wrong version, and I needed 8.1 gapps. What package did you use?

9.0 Gapps not working
kenetix said:
I just tried to flash 9.0 pico package. It said it was the wrong version, and I needed 8.1 gapps. What package did you use?
Click to expand...
Click to collapse
UPDATE. I did find a way that worked for me. https://forum.xda-developers.com/nexus-6p/development/rom-dot-os-3-0-t3898420/page25
All credit goes to that guy for figuring this out.

Can anyone help me here
I tried fashing the FBE recovery via fastboot and the cmd shows that it's finished flashing but I am not able to boot into recovery instead I stuck in GOOGLE logo

Skull2candy said:
Can anyone help me here
I tried fashing the FBE recovery via fastboot and the cmd shows that it's finished flashing but I am not able to boot into recovery instead I stuck in GOOGLE logo
Click to expand...
Click to collapse
You are on custom rom(fde) before flashing it?It would be better if you explain your problem in detail.

abdullahk6809 said:
You are on custom rom(fde) before flashing it?It would be better if you explain your problem in detail.
Click to expand...
Click to collapse
I don't have any rom installed and my phone is 4core

[ROM][9.0][OFFICIAL][PINE][NIGHTLY][SHARE] MoKee Open Source Android Project

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[SIZE="4"]
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* I am not the maintainer or developer, I found this and wanted to share it on XDA
*/
[/SIZE]
MoKee Open Source is the biggest non-profit Android Open Source development team in China, with members from all parts of the world. We follow the latest development from Google closely and improve various parts of Android according to the user habits. Being a non-profit organisation, we utilise our spare time and own funds to keep this passion alive. Therefore, the costs for the forum and servers are solely beared by us. In order to provide a good user experience, we only included a few preinstalls in the ROM. Along with the advertisements in the forum; we hardly get enough to pay for the bandwidth. The point is, those are our only source of income, however many developers choose to exclude them when releasing unofficial builds. Unlike CyanogenMod, we did not accept monetary help at the early stages, as in China, most people do not understand the meaning of “making a donation”. They would think of it as buying a service, which is conflicting with our objectives. Anyways, we still made it until today, and even started to provide third party developers a chance to utilise our OTA system. All of these are the fruit of our hard work and passion. We are proud of the happy users, and we are also proud of the support given to MoKee Open Source. Most importantly, we are proud of the improvements we have achieved all these while, and the advancements never stop.
I AM NOT THE DEVELOPER OF THIS ROM AND I ONLY MAKE THIS THREAD FOR XDA COMMUNITY. IN ANY CASE, MOKEE AND GuaiYiHu HAS ALL THE RIGHTS OVER THIS ROM.
What's working :
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS
VoLTE
ViLTE
Known issues:
You tell me
Instructions :
Download this TWRP Recovery and install it.
Download the ROM (MK90.0-pine-xxxxxxxxxx-NIGHTLY.zip)
Go into TWRP Recovery — Wipe — Advanced Wipe — Select: Dalvik、Data、Cache、System — Swipe to Wipe
Install the ROM (MK90.0-pine-xxxxxxxxxx-NIGHTLY.zip)
If you have problems during the flash, you have to unpack the archive and delete the "compatibility" file. Once that is done, put all the files together in a new archive. ZIP, and you will have no problems during flash.
Downloads:
[*]MoKee Download for PINEhttps://download.mokeedev.com/pine.html
MoKee Add-Ons:
[*]MoKee Extras
MoKee Help & Support links:
[*]MoKee Announcements
[*]MoKee Changelogs
[*]MoKee Forums
[*]MoKee Guides
[*]MoKee Statistics
[*]MoKee Gerrit
[*]MoKee Bug Reports
Sources: https://github.com/GuaiYiHu/android_kernel_xiaomi_sdm439
Credits:
GuaiYiHu
Mokee Development Team
LineageOS
If you like it, don´t forget to say thanks!
XDA:DevDB Information
Mokee Open Source Project, ROM for the Redmi 7A, ROM for the Redmi 7A
Contributors
GuaiYiHu
ROM OS Version: 9.x Pie
Based On: Mokee Open Source Project
Version Information
Status: Nightly
Current Beta Version: 2019-10-27
Beta Release Date: 2019-10-24
Created 2019-10-28
Last Updated 2019-10-28

Release types:
RELEASE: Tested after integrating new features, more stable than NIGHTLY. (Odexed builds)
NIGHTLY: Built daily with newest code and experimental features, might contain undiscovered bugs. (Deodexded builds)
HISTORY: Final odexded builds once a newer Android version is out and being built.
EXPERIMENTAL: Released when a new device is added or when a new feature is added for public beta testing and feedback. (Deodexded builds)
UNOFFICIAL: Maintained separately by individual developers, usually involves modification of shared code which cannot be merged (affects other devices), therefore maintained by the developer himself.

This is nice, but I think the flashing method is "copy pasted" from original site, and therefore will not work on this device. But i am not sure.
what i meant that wont work is that this device's normal flashing method requires a lot of reboot to recovery, while the OP's instructions is for A devices only.

regularfanb0y said:
This is nice, but I think the flashing method is "copy pasted" from original site, and therefore will not work on this device. But i am not sure.
what i meant that wont work is that this device's normal flashing method requires a lot of reboot to recovery, while the OP's instructions is for A devices only.
Click to expand...
Click to collapse
Actually 7A is A-only device, working as system-as-root.
The OP's instructions are right, cuz I installed it this way and everything works fine.

Thank you this is a good step forward. I'm going to try this rom later this evening.

Wipe data of format data?
Coming from stock MIUI 11 Android 9 do I have to format the data partition or to wipe it? Usually MIUI to AOSP needs a format.

Luelu said:
Actually 7A is A-only device, working as system-as-root.
The OP's instructions are right, cuz I installed it this way and everything works fine.
Click to expand...
Click to collapse
Alright my bad, but flashing a gsi rom, we need to restart a lot(wipe, reboot to recovery, flash gsi, reboot to recovery, flash zips, reboot to system)
While this rom is installed in a traditional way (wipe and flash just like the old days) if someone can explain why itll be really appreciated.
I am really new to GSI and this phone but i am willing to help testing stuffs for development for this device! only if TWRP restore function works

Davv said:
Coming from stock MIUI 11 Android 9 do I have to format the data partition or to wipe it? Usually MIUI to AOSP needs a format.
Click to expand...
Click to collapse
Nop, just wipe.

Luelu said:
Nop, just wipe.
Click to expand...
Click to collapse
Thank you so much
---------- Post added at 09:31 PM ---------- Previous post was at 09:00 PM ----------
cant download twrp, I cant create a QQ Account, evrytime i try to verificate my phone number it asks to send an sms to a chinese number but that doesnt work. can someone reupload it on some other cloud service?

I appreciate your work, but TWRP is impossible to download, not with all these chinese characters. I see a QR code but I want to download to my PC first.
Even google was unable translate it

Jazzda said:
I appreciate your work, but TWRP is impossible to download, not with all these chinese characters. I see a QR code but I want to download to my PC first.
Even google was unable translate it
Click to expand...
Click to collapse
I used twrp LR team from gsi post and worked with this recovery.if you need root download su add .magisk don't work...

Newest Magisk seems to be working through recovery at least work for me for installing NanoDroid.
There seems to be problem with setting up mobile hotspot. Mobile hotspot cant be seen or accessed with SSID either.
ROM also lacks possibility to have navigation bar binded.

Is it possible to use the SD Card as internal storage with this rom? It's more or less the single reason I'd flash a different rom for.

the batery life it is much smaller than miui's

I flash the rom following the instructions, but my cel doesn't boot, only reboot and boot to twrp, i'm only flashing the system without su, magisk or gapps, but it's the same, what can be wrong?

Ranfiel said:
I flash the rom following the instructions, but my cel doesn't boot, only reboot and boot to twrp, i'm only flashing the system without su, magisk or gapps, but it's the same, what can be wrong?
Click to expand...
Click to collapse
flash stock rom and flash again the rom

ElFanta said:
flash stock rom and flash again the rom
Click to expand...
Click to collapse
The same, doesn't boot, it's curious because the GSI roms doesn't work for me too, i don't know why. I'm coming from MIUI 11, but i rollback to 10.2.5 so shouldn't have problem with this, but i have.
I rollback with MiFlash Tool with fastboot rom global
EDIT: I get the GSI Rom working, just format DATA and type YES on TWRP
EDIT2: After make the DATA reset with TWRP i was able to boot with the MoKee Rom :3

mais 14 said:
I used twrp LR team from gsi post and worked with this recovery.if you need root download su add .magisk don't work...
Click to expand...
Click to collapse
Maybe try using patched boot img from gsi thread.

Ranfiel said:
I flash the rom following the instructions, but my cel doesn't boot, only reboot and boot to twrp, i'm only flashing the system without su, magisk or gapps, but it's the same, what can be wrong?
Click to expand...
Click to collapse
Try format data for twrp and reboot.

Ranfiel said:
The same, doesn't boot, it's curious because the GSI roms doesn't work for me too, i don't know why. I'm coming from MIUI 11, but i rollback to 10.2.5 so shouldn't have problem with this, but i have.
I rollback with MiFlash Tool with fastboot rom global
EDIT: I get the GSI Rom working, just format DATA and type YES on TWRP
EDIT2: After make the DATA reset with TWRP i was able to boot with the MoKee Rom :3
Click to expand...
Click to collapse
The batery life is good in your rom? In my phone is a sh*t

[ROM][10.0][UNOFFICIAL][wasabi] LineageOS 17.1

FAQ.
Q. Why doesn't this rom pass cts?
A. We don't use hacks to bypass safetynet attestation, we just use our fingerprint, so cts won't pass by default.You can root your device and install magisk to pass safetynet.

Please fill instruction and FAQs
Becouse many has bricked their phones by installing rom and rooting

how ahould i root this room

amr kaka said:
how ahould i root this room
Click to expand...
Click to collapse
By patching the boot image with magisk manager

Does it support 90hz?
does this rom support 90hz?

Cindafella said:
does this rom support 90hz?
Click to expand...
Click to collapse
Yes, It does support 90Hz refresh rate.

Does it support magisk?? And do i have to unmount system to flash this rom ??

v. kumar said:
Does it support magisk?? And do i have to unmount system to flash this rom ??
Click to expand...
Click to collapse
The build is permissive so yeah it does support magisk.
Just flashing the rom and formatting data will work.(if you get an error on format, just reboot to recovery and do that again.)
I would suggest you to join Realme 6 telegram group for any help on doing the same.

Disable avb..
mandeep_virang said:
The build is permissive so yeah it does support magisk.
Just flashing the rom and formatting data will work.(if you get an error on format, just reboot to recovery and do that again.)
I would suggest you to join Realme 6 telegram group for any help on doing the same.
Click to expand...
Click to collapse
I have rooted my device , so do i have to disable avb again ??

Help a total noob here please!
mandeep_virang said:
The build is permissive so yeah it does support magisk.
Just flashing the rom and formatting data will work.(if you get an error on format, just reboot to recovery and do that again.)
I would suggest you to join Realme 6 telegram group for any help on doing the same.
Click to expand...
Click to collapse
Thank you so much for your response... I really am done with RealMe UI and I remember loving LineageOS on my old OnePlus One.
Currently, I'm on RealMe B49.
And I want to do 4 things.
1. Join this telegram group you're talking about! I'm just installing telegram now. But how do I find the XDA RealMe 6 Group? I've never used Telegram before. (I'm sorry if I'm asking really stupid questions. I feel embarrassed. Sorry!)
2. Install LineageOS on my phone.
(I guess I'll have to follow the "Unlock your bootloader" thread first).
3. / 4. Install Magisk
3. / 4. Root my phone.
Can you help me with 3 and 4?
I think I can follow the instructions and Unlock my bootloader. And I think I can follow the instructions and install LineageOS 17.1 and Google Apps.
But I have no idea how to do the Magisk Root thingie.
One more stupid as hell question, coming up: what do you mean by: "the build it permissive..." I get it means I can root my phone with Magisk. But what does it mean, really?
And one last thing - would you recommend LineageOS or RR?
Thank you so much for all the help. Sorry about the wall of text and these noob questions!

You can click this link bellow to join the Telegram group.
t.me/RealmeG90TSeriesOfficial
Do note that this invite link might change in the future.

Thank you! I joined it!
givesandwich said:
You can click this link bellow to join the Telegram group.
t.me/RealmeG90TSeriesOfficial
Do note that this invite link might change in the future.
Click to expand...
Click to collapse
Thank you so much! I joined the group.

Hi folks,
I'd be more than glad to have lineageOS on realme 6. But where do I get vbmeta.img and PBRP recovery.img for that device? Does that work with european version as well?
thanks for the effort and best regards
Stephan

after installing lineage os when i flash magisk zip it shows at the end of flahsing log ...
unable to mount apex /devs/block/loop6/....and it goes on bootloop...if i am doing something wrong please tell me ..o wanna root my phone

mandeep_virang said:
The build is permissive so yeah it does support magisk.
Just flashing the rom and formatting data will work.(if you get an error on format, just reboot to recovery and do that again.)
I would suggest you to join Realme 6 telegram group for any help on doing the same.
Click to expand...
Click to collapse
Alas, this build doesn't support Magisk.
I installed LOS - all ok, works and reboots successfully.
I flashed Magisk via PBRP, rebooted - and got bootloop.
I removed Magisk via PBRP - still bootloop.
So I had to reinstall LOS to make it work flawlessly again.

Awakeup said:
Alas, this build doesn't support Magisk.
I installed LOS - all ok, works and reboots successfully.
I flashed Magisk via PBRP, rebooted - and got bootloop.
I removed Magisk via PBRP - still bootloop.
So I had to reinstall LOS to make it work flawlessly again.
Click to expand...
Click to collapse
Hi there,
Did you flash permissiver along with Magisk?
For any kinda help on same, join this telegram group
Realme 6 Series
@RM6UPDATES @RM6OFFICIAL @RM6PHOTOGRAPHY @GAMINGRM6
t.me

What do people think of the performance for this rom?
I've been very disappointed by the stock realme 6 experience compared to the specs I bought it for, so hoping I can find a replacement.
It may well be a limitation of the mediatek chipset, but I'm hoping it's just the stock rom..

Skylinedude said:
What do people think of the performance for this rom?
I've been very disappointed by the stock realme 6 experience compared to the specs I bought it for, so hoping I can find a replacement.
It may well be a limitation of the mediatek chipset, but I'm hoping it's just the stock rom..
Click to expand...
Click to collapse
For now, the performance of all custom roms are going to be worse than RealmeUI.

How do you know for sure?
I find particularly with chrome on the realme ui that it gets very laggy after some use, never had that with another phone before.. also seems like the only way to fix it temporarily is to restart the phone.

[10.0][UNOFFICIAL][GSI]Resurrection Remix v8.6.5 [SM-T510][gta3xlwifi]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Q
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome 
combination of performance, customization, power and the most new features, brought directly to your Device.

Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.


Download Resurrection Remix AP tar & the latest GApps package
Boot into download mode
Flash the provided file as AP in Odin
Turn off the device
Boot to your recovery by pressing power key + volume up
Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
Flash Google Apps package(Optional)
Flash Magisk Root(Optional)
First boot may take up to 5 minutes.
ROM Download (With OrangeFox Recovery built by me)
ROM Download (With TWRP built by Magendanz)
GApps
Resurrection Remix Source
GSI
Magendanz ~ Device tree for recovery & vendor image to make GSI useable for the machine
phhusson ~ Maintaining the treble repositories
XDA Developers
LineageOs Team
AICP
Crdroid
AOSIP
DU
Xtended
Evolution X
Bliss
Omni Team

you can create this rom for sm-t580 this rom is fluid And it is very customizable

Chris_0147 said:
you can create this rom for sm-t580 this rom is fluid And it is very customizable
Click to expand...
Click to collapse
I don't have that device, searched out multiple places and their is no publicly available specifications on it (not even GSI)

I was hoping this ROM would have support for exFat on the SD card, but no such luck. Still have to flash the Xfinity kernel to get exFat.

Very nice ROM build! No issues so far... root an custom kernel installed. This is the ROM i've wanted since day one of having this tablet. Tried many but none of them are nearly as good as this one. THANK YOU

Thank you so much! This is still one of my favorite ROMs.

Im new to rooting. Ive looked through tutorials and before I proceed. My android tab 10.1 has android version 10. All the root files ive seen none of them match the build number I have on the tablet. Is this a whole new OS of sorts? So no matter the build my android is showing, I can still install this.

watts320 said:
Im new to rooting. Ive looked through tutorials and before I proceed. My android tab 10.1 has android version 10. All the root files ive seen none of them match the build number I have on the tablet. Is this a whole new OS of sorts? So no matter the build my android is showing, I can still install this.
Click to expand...
Click to collapse
This is GSI, so this does not depend on any version specific kernels
You can backup important things first before flashing, then download stock ROMs in case things really went wrong
This build does not come with root, you can follow Magisk guides for flashing root

will this ROM get OTA updates for future builds ?

memleketim05 said:
will this ROM get OTA updates for future builds ?
Click to expand...
Click to collapse
I do have plans on making this official, but for OTA, since this is a GSI build, there might be difficulties, however updates will get posted here constantly, so subscrible to the thread if you want manual OTA for now

Allready subscribed
Also looking forward to Android 11 from you for this device

memleketim05 said:
Allready subscribed
Also looking forward to Android 11 from you for this device
Click to expand...
Click to collapse
The RR team has been working on Android 11 for what I heard of, I will build it as soon as a some what stable one comes out

RobotHanzo said:
The RR team has been working on Android 11 for what I heard of, I will build it as soon as a some what stable one comes out
Click to expand...
Click to collapse
Anybody working on exFat support?

lewmur said:
Anybody working on exFat support?
Click to expand...
Click to collapse
Not sure

Follow the instructions but the can't install gapps and the system will not boot.
Update: Got it to boot by manually flashing the img files in TWRP.

Hi, nice to see a RR ROM on the 510 but how do you install a tar file with twrp, it takes only zips ?

Imagitom said:
Hi, nice to see a RR ROM on the 510 but how do you install a tar file with twrp, it takes only zips ?
Click to expand...
Click to collapse
Flashed my device yesterday.
The Custom Recovery is included in the rom. The Orange Fox Recovery is great so far and based on TWRP 3.5.0. So can recommend the Rom woth Orange Fox.
You have to open the .tar file in Odin as AP.
@RobotHanzo
I found out that the automatic adjustment for the brightness doesn't work.
Also it would be great if you could write in your first post which version the ROM is based on so we can see if there are updates in future.
The header says 8.6.4 but the ROM is 8.6.5.

Imagitom said:
Hi, nice to see a RR ROM on the 510 but how do you install a tar file with twrp, it takes only zips ?
Click to expand...
Click to collapse
For this, since its a GSI, you don't have to install the zip if you have already patched the vendor images, if you haven't, go find Magendanz's builds like his Nexus rom and flash it
Next, download the rom and extract the files using software like 7zip or winrar
Send the system.img you get from the extraction process to your tablet and flash as system image, you should get a working system

memleketim05 said:
Flashed my device yesterday.
The Custom Recovery is included in the rom. The Orange Fox Recovery is great so far and based on TWRP 3.5.0. So can recommend the Rom woth Orange Fox.
You have to open the .tar file in Odin as AP.
@RobotHanzo
I found out that the automatic adjustment for the brightness doesn't work.
Also it would be great if you could write in your first post which version the ROM is based on so we can see if there are updates in future.
The header says 8.6.4 but the ROM is 8.6.5.
Click to expand...
Click to collapse
Actually the first build is on 8.6.5 but I mistyped lol
For the light adjustment part, it seems like another generic samsung problem thats caused by using camera as the light sensor, you can try to follow the issue here https://github.com/phhusson/treble_experimentations/issues/1468 and see if theres any future responses from that

Thanks for bringing this RR rom. Previously I was using a different RR GSI. Does it have smaller recent preview? Cuz the big recent apps looks awkward on a tab. Moreover there is this brightness bug where on very low brightness the screen looks like it is turned off! And please can you make the rom in compressed format like .xz, would be a great help to this wandering soul, as it eats less data.

Better Mobile App

welcome