What is the best method to return fully to stock?
Is it extracting the system partition from the update.app downloaded from https://pro-teammt.ru/online-firmware-database-ru/ and flash it using fastboot
or searching for the service rom on https://androidhost.ru/ and doing the dload method?
My phone is RNE-L21 8.0.0.315 (C185)
Deathecho said:
What is the best method to return fully to stock?
Is it extracting the system partition from the update.app downloaded from https://pro-teammt.ru/online-firmware-database-ru/ and flash it using fastboot
or searching for the service rom on https://androidhost.ru/ and doing the dload method?
My phone is RNE-L21 8.0.0.315 (C185)
Click to expand...
Click to collapse
Dload method. Process will erase all the data from your device and lock bootloader.
bozka1 said:
Dload method. Process will erase all the data from your device and lock bootloader.
Click to expand...
Click to collapse
Thank you for the reply if you don't mind further help can you tell me if this is the correct service rom for my phone?
https://androidhost.ru/8U3
I have already downloaded the files from this one
https://pro-teammt.ru/online-firmwa...l=RNE-L21C185B315+(8.0.0.315)&firmware_page=0
Can they be used interchangeably or only the first one?
Second question
the dload method is to unzip the file and copy UPDATE.APP on SD card in a folder named dload on the root of the card. (I can't have it on the phone itself right?)
then reboot on download mode (turn off your phone, then, press volume up + volume down + power button until Huawei logo appears).
This should trigger the process to install the app UPDATE.APP file.
Is this correct?
Deathecho said:
this is the correct service rom for my phone?
https://androidhost.ru/8U3
Click to expand...
Click to collapse
It's correct service ROM for your phone.
From dload you can flash service ROM only, from
androidhost.ru, this site contains only Service ROM .
Dload method: you have to extract file >dload< from downloaded .zip archive, and just copy >dload< file to the root directory of the SD card. ( Before you do anything, read carefully Software Upgrade Guidline in "ReleaseDoc" ).
Use force method with three buttons (my strongly recommendation).
With Service ROM you will get full stock with locked bootloader (warranty will not void any more).
bozka1 said:
It's correct service ROM for your phone.
From dload you can flash service ROM only, from
androidhost.ru, this site contains only Service ROM .
Dload method: you have to extract file >dload< from downloaded .zip archive, and just copy >dload< file to the root directory of the SD card. ( Before you do anything, read carefully Software Upgrade Guidline in "ReleaseDoc" ).
Use force method with three buttons (my strongly recommendation).
With Service ROM you will get full stock with locked bootloader (warranty will not void any more).
Click to expand...
Click to collapse
Thank you it worked and I'm back to stock. I have a few questions...
There is an EMUI update, I was wondering if I did update and wanted to install a rom then back to stock again.. can I use the same files I used or do I have to download new service rom?
Second question can I still unlock bootloader with the same code I had?
Related
I just make my mobile unlock(KIW-TL00C01), I have tried
1. extract the image of UPDATE.app from B228 and fastboot flash (failure)
https://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
2. using e-recovery(internal recovery), put firmware zip file(B228) in dload directory in SDcard, inform failed at 5%,
if you put that file in root directory of SDcard, it would stop at 5%.
3. install the 3rd part firmware from TWRP recovery(installed, but reboot would make the touch screen support in all the place, and boot loops)
I have tried install a different firmware through the adb when the touch screen is broken.
I use the following command, I didn't find a one could work.
Code:
recovery --update_package=/external_sd/firmware.zip
The one thing I could do to is put the UPDATE.app of B430 into dload, and retry the method 2 or my mobile is complete brick.
I wonder does the Huawei update the signature or firmware of TrustZone?
I don't know anything I could do to make it work.
if you want to downgrade, you first have to dload the rollback package, then the actual firmware
the rollback package
Click to expand...
Click to collapse
Oh I don't know that before, but where could I get that?
hizukiayaka said:
I just make my mobile unlock, I have tried
1. extract the image of UPDATE.app from B228 and fastboot flash (failure)
https://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
2. using e-recovery(internal recovery), put firmware zip file(B228) in dload directory in SDcard, inform failed at 5%,
if you put that file in root directory of SDcard, it would stop at 5%.
3. install the 3rd part firmware from TWRP recovery(installed, but reboot would make the touch screen support in all the place, and boot loops)
I have tried install a different firmware through the adb when the touch screen is broken.
I use the following command, I didn't find a one could work.
Code:
recovery --update_package=/external_sd/firmware.zip
The one thing I could do to is put the UPDATE.app of B430 into dload, and retry the method 2 or my mobile is complete brick.
I wonder does the Huawei update the signature or firmware of TrustZone?
I don't know anything I could do to make it work.
Click to expand...
Click to collapse
where are you getting your files ? what is the Full version of your phone KIW-TL00C00 or KIW-TL00C01 or KIW-TL00HC00 ?
you must use the exact version for your phone.
the only useful info on the Honor 7 link you posted is how to flash from dload
nowhere did you say you put update.app in dload folder on ext_sdcard and flash with power + volume up and volume down
First determine the correct file for your phone and then flash it correctly
clsA said:
where are you getting your files ? what is the Full version of your phone KIW-TL00C00 or KIW-TL00C01 or KIW-TL00HC00 ?
you must use the exact version for your phone.
the only useful info on the Honor 7 link you posted is how to flash from dload
nowhere did you say you put update.app in dload folder on ext_sdcard and flash with power + volume up and volume down
First determine the correct file for your phone and then flash it correctly
Click to expand...
Click to collapse
I tried to use the match file, but failed in rollback, it would always inform me that system update failed.
hizukiayaka said:
I tried to use the match file, but failed in rollback, it would always inform me that system update failed.
Click to expand...
Click to collapse
Follow this : https://forum.xda-developers.com/honor-5x/how-to/guide-entering-fastboot-using-key-t3400869
After you entered fastboot, flash twrp, then restart to recovery and copy stock firmware to sdcard.
Even if it fails, you can hold VOL+ button during startup to enter eRecovery, where you can revert to stock using nothing but wireless LAN
P/S : I'm also stuck at bootloops trying to install lineage and mokee, please post a guide if you have done it successfully
Well, i want to exit of the list of safetynet, i tried magisk safetynet fix, nothing works, this happened after a HOTA Downgrade to Nougat because Oreo (EMUI B330) made me lose too much performance of my Mate 10 Lite (RNE-L03C178) and the APi interpreted the downgrade how a dangerous modification of the system for the apps or in other words a cheating action, i want to exit of the list of the api, i listened with a complete format of a device the safetynet will provide the apps (With SafetyNet block) back in Play Store.
Well i want to format my device with the DLOAD method or other method, could someone explain to me how to do it? (the process of the dload)
Sorry for the grand explanation and my too very bad english, my language is spanish...
Koa1 said:
Well, i want to exit of the list of safetynet, i tried magisk safetynet fix, nothing works, this happened after a HOTA Downgrade to Nougat because Oreo (EMUI B330) made me lose too much performance of my Mate 10 Lite (RNE-L03C178) and the APi interpreted the downgrade how a dangerous modification of the system for the apps or in other words a cheating action, i want to exit of the list of the api, i listened with a complete format of a device the safetynet will provide the apps (With SafetyNet block) back in Play Store.
Well i want to format my device with the DLOAD method or other method, could someone explain to me how to do it? (the process of the dload)
Sorry for the grand explanation and my too very bad english, my language is spanish...
Click to expand...
Click to collapse
In theory, you should download the stock rom from here: http://pro-teammt.ru/firmware-database/
Then, unzip the file and copy UPDATE.APP on your SD card. It has to be in a folder named dload on the root of the card.
Afterwards, reboot on download mode (turn off your phone, then, press volume up + volume down + power button until Huawei logo appears). This should trigger the process to install the app UPDATE.APP file.
If you have TWRP recovery, you will need to go back to your stock recovery (on that... please search on this forum).
I hope this helps!
jeinnerabdel said:
In theory, you should download the stock rom from here: http://pro-teammt.ru/firmware-database/
Then, unzip the file and copy UPDATE.APP on your SD card. It has to be in a folder named dload on the root of the card.
Afterwards, reboot on download mode (turn off your phone, then, press volume up + volume down + power button until Huawei logo appears). This should trigger the process to install the app UPDATE.APP file.
If you have TWRP recovery, you will need to go back to your stock recovery (on that... please search on this forum).
I hope this helps!
Click to expand...
Click to collapse
I'm understanding the next step...the download of all 3 files (update.zip and the others files) of a one file and extract it
Because Firmware Finder gives me 3 zip files and i not understand wich of 3 decompress the update.app
Sorry for my english...again...
jeinnerabdel said:
In theory, you should download the stock rom from here: http://pro-teammt.ru/firmware-database/
Then, unzip the file and copy UPDATE.APP on your SD card. It has to be in a folder named dload on the root of the card.
Afterwards, reboot on download mode (turn off your phone, then, press volume up + volume down + power button until Huawei logo appears). This should trigger the process to install the app UPDATE.APP file.
If you have TWRP recovery, you will need to go back to your stock recovery (on that... please search on this forum).
I hope this helps!
Click to expand...
Click to collapse
I listened about to do this with the 3 update.app files
1.-update.zip
2.-update_data_full_public.zip
3.-update_full_RNE-L03_xxxxx_la.zip
Extract their update.app and install in order
Is this correct?
Koa1 said:
I listened about to do this with the 3 update.app files
1.-update.zip
2.-update_data_full_public.zip
3.-update_full_RNE-L03_xxxxx_la.zip
Extract their update.app and install in order
Is this correct?
Click to expand...
Click to collapse
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
ante0 said:
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
Click to expand...
Click to collapse
I install in order specified and finally wipe with erecovery, is this correct?
ante0 said:
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
Click to expand...
Click to collapse
And the last question...
What is the diference of a Online Firmware and a Offline Firmware?
ante0 said:
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
Click to expand...
Click to collapse
Nothing, i resolved it, thanks very much!
ante0 said:
Update.app in update.zip and update.app in update_full_RNE-L03_xxxxx_la.zip
Unless it's offline firmware it won't install.
And in most cases it's online only.
Click to expand...
Click to collapse
I tried to install it, it stucks at 5% and error message, what i do? Please help...
(Huawei MATE 10 ALP-L09) Hello, I tell you my situation, I am in the emui 8 version with cust 432 in the 150 sp1 version (xloader 1).
I want to try emui 9 so I'm going to switch to xloader 2.
I have the bootloader open and I'll leave it like this to update manually.
I'm going to use the HWOTA system, but when downloading the files of the latest version of emui 9 (version 159) I realize that 3 * .zip files are no longer the same as before, now only 2 files form it. The steps are the same? I put those two files in the Repack folder and then I go to the Ota folder and run the ota.bat ??
And another thing, should we rename those two files as was done before?
Thank you. A greeting.
Koa1 said:
I tried to install it, it stucks at 5% and error message, what i do? Please help...
Click to expand...
Click to collapse
quite old topic i know but i faced the same problem here with my mediapad now. copied all files and update.app to sd card under dload folder but got the error message at 5 percent. there was any solution for this?
artifexor said:
quite old topic i know but i faced the same problem here with my mediapad now. copied all files and update.app to sd card under dload folder but got the error message at 5 percent. there was any solution for this?
Click to expand...
Click to collapse
From dload folder you can flash Service ROM only,
you can download the S. ROM here:
https://androidhost.ru/search.html
Follow the instructions in "ReleaseDoc" . GL!
Warning: this process will erase all the data from your device!!!
bozka1 said:
https://androidhost.ru/search.html
Click to expand...
Click to collapse
Thank you very much! This site contains only service ROM? I have not found any explicit service ROM just regular looking ROM file and some repair ROM but for different region and with password. My current ROM version is BTV-DL09C100B311.
artifexor said:
Thank you very much! This site contains only service ROM? I have not found any explicit service ROM just regular looking ROM file and some repair ROM but for different region and with password. My current ROM version is BTV-DL09C100B311.
Click to expand...
Click to collapse
Yes, only service and board ROM.
Explicit service ROM for your device/ROM version :
https://androidhost.ru/8Xg
bozka1 said:
Yes, only service and board ROM.
Explicit service ROM for your device/ROM version :
https://androidhost.ru/8Xg
Click to expand...
Click to collapse
Is there any service ROM for RNE-L03C178 or C605? I’ve been searching a lot, and well I don’t find anything. And sorry to answer to this old post
Koa1 said:
Is there any service ROM for RNE-L03C178 or C605? I’ve been searching a lot, and well I don’t find anything. And sorry to answer to this old post
Click to expand...
Click to collapse
Enjoy
C605
https://androidhost.ru/311B
https://androidhost.ru/afs
https://androidhost.ru/7AU
C178 (paid service, 17euros )
https://easy-firmware.com/index.php?a=downloads&b=file&id=173660
https://easy-firmware.com/index.php?a=downloads&b=file&id=150819
bozka1 said:
Yes, only service and board ROM.
Explicit service ROM for your device/ROM version :
https://androidhost.ru/8Xg
Click to expand...
Click to collapse
bozka1 said:
Enjoy
C605
https://androidhost.ru/311B
https://androidhost.ru/afs
https://androidhost.ru/7AU
C178 (paid service, 17euros )
https://easy-firmware.com/index.php?a=downloads&b=file&id=173660
https://easy-firmware.com/index.php?a=downloads&b=file&id=150819
Click to expand...
Click to collapse
Thanks! But, do you have the one for Android 7.0?
Koa1 said:
Thanks! But, do you have the one for Android 7.0?
Click to expand...
Click to collapse
For A 7 I don’t find anything on androidhost.ru , try
https://easy-firmware.com/index.php?a=downloads&b=folder&id=31285&p_start=1 .
P.S.: If I may ask, why A7 ?
bozka1 said:
For A 7 I don’t find anything on androidhost.ru , try
https://easy-firmware.com/index.php?a=downloads&b=folder&id=31285&p_start=1 .
P.S.: If I may ask, why A7 ?
Click to expand...
Click to collapse
Because Android 8 in this phone works bad and slow
Koa1 said:
Because Android 8 in this phone works bad and slow
Click to expand...
Click to collapse
Okay, but if You now running A8 , You can downgrade to A7 using HiSuite (Update > Other version) , or, if You have TWRP on board, You can downgrade flashing A7 firmware via HuRupdater 0.4 . It's strongly not recommended downgrade via dload method, it may brick Your phone.
I'm trying to fully restore my honor 10 (col-l29c432) and have read a DLOAD restore may even relock the bootloader. I've decided I don't now want to mess with custom ROMs and don't want root so happy to lock it.
Trouble is I can't get DLOAD to work.
I've downloaded the full update zip, created the DLOAD folder on Internal storage and copied the update.app there. Inside I've created a folder called col-l29_hw_eu and put the second update.app in there.
Rebooting with both volume buttons down should start the install but the phone says software install error and does nothing.
I tried with a OTG cable and flash drive but same result.
Does DLOAD just not work?
Darrenc81 said:
I'm trying to fully restore my honor 10 (col-l29c432) and have read a DLOAD restore may even relock the bootloader. I've decided I don't now want to mess with custom ROMs and don't want root so happy to lock it.
Trouble is I can't get DLOAD to work.
I've downloaded the full update zip, created the DLOAD folder on Internal storage and copied the update.app there. Inside I've created a folder called col-l29_hw_eu and put the second update.app in there.
Rebooting with both volume buttons down should start the install but the phone says software install error and does nothing.
I tried with a OTG cable and flash drive but same result.
Does DLOAD just not work?
Click to expand...
Click to collapse
What build are you right now?
Did you modify your system?
Emui 9.0.0.159
Flashed through fastboot so all stock, original upgrade to emui 9 was through stock ota method. Tried a custom ROM but too much wasn't working. Now want it restored with warranty to probably sell
Darrenc81 said:
Emui 9.0.0.159
Flashed through fastboot so all stock, original upgrade to emui 9 was through stock ota method. Tried a custom ROM but too much wasn't working. Now want it restored with warranty to probably sell
Click to expand...
Click to collapse
There is a downgrade firmware available for H10 try to downgrade using hisuite.
I'll give it a go, I can downgrade by flashing in fastboot but I'd read a DLOAD restore would relock the bootloader too
Darrenc81 said:
I'll give it a go, I can downgrade by flashing in fastboot but I'd read a DLOAD restore would relock the bootloader too
Click to expand...
Click to collapse
You can just use relock command to relock the bootloader after downgrade.
Dload is not working on H10.
Was hoping for lock not relock. But if DLOAD doesn't work then that solves that.
HI,
Can I ask how you flashed with fastboot? Struggling with that myself
Thanks
Method 1(Works with locked bootloader)(Convert China Rom to Global)
Part 1
1. Download Global rom Android 10 zip file(You can check wga0's thread for this thanks to wga0 for this file)
2. Put this zip file in ota folder of your internal storage and rename it as update.zip (if there is no ota folder than create it)
3. Dial *#*#1027#*#* click on Local ota and it will start updating your device.
4. Factory reset your device after perform above procedure to avoid any software error.
If above Part 1 don't work for you than try this method
1. Download Android 9 Full ota of china rom
2. Move it on ota folder of your phone's internal storage
3. Rename it to update.zip
4. Dial *#*#1027#*#*
5. Click on Local ota
6. After procedure is complete you might be in recovery mode of your device and in recovery mode wipe device data.By this method you will be downgrade to Android 9.
7. Using your phone's software update install two update first of 87MB and another of 1357MB.
8. After installing this two update just follow part 1 posted above and yoy will be able to install global rom on your china device.
Above method i found on another forum and working on bs2 pro and will also work on bs2 as well.
Below method is tested by me and it's working fine and i converted my device's Global rom to china rom and will also work for converting china rom to global.
Method 2(Require unlocked bootloader)
1.Download rom which you want to install and extract folder in it (there should be 22 img files in it)
2.Download flash-all.zip and extract flashall.bat to the folder in which 22 img files are available
3.Reboot your device to fastboot
4.Double click on flashall.bat file and it will start flashing rom.
Note:Above method will wipe your data.
i am new user and can not add links now so will add links later.
hi bro, do you have any update link for CN firmware, this is my latest firmware now
Hi bro. Do you have link to download?
Will this process breaks ota?
Ksrs1 said:
Method 1(Works with locked bootloader)(Convert China Rom to Global)
Part 1
1. Download Global rom Android 10 zip file(You can check wga0's thread for this thanks to wga0 for this file)
2. Put this zip file in ota folder of your internal storage and rename it as update.zip (if there is no ota folder than create it)
3. Dial *#*#1027#*#* click on Local ota and it will start updating your device.
4. Factory reset your device after perform above procedure to avoid any software error.
If above Part 1 don't work for you than try this method
1. Download Android 9 Full ota of china rom
2. Move it on ota folder of your phone's internal storage
3. Rename it to update.zip
4. Dial *#*#1027#*#*
5. Click on Local ota
6. After procedure is complete you might be in recovery mode of your device and in recovery mode wipe device data.By this method you will be downgrade to Android 9.
7. Using your phone's software update install two update first of 87MB and another of 1357MB.
8. After installing this two update just follow part 1 posted above and yoy will be able to install global rom on your china device.
Above method i found on another forum and working on bs2 pro and will also work on bs2 as well.
Below method is tested by me and it's working fine and i converted my device's Global rom to china rom and will also work for converting china rom to global.
Method 2(Require unlocked bootloader)
1.Download rom which you want to install and extract folder in it (there should be 22 img files in it)
2.Download flash-all.zip and extract flashall.bat to the folder in which 22 img files are available
3.Reboot your device to fastboot
4.Double click on flashall.bat file and it will start flashing rom.
Note:Above method will wipe your data.
Click to expand...
Click to collapse
masruradi said:
hi bro, do you have any update link for CN firmware, this is my latest firmware now
Click to expand...
Click to collapse
hi，bro。can i ask somethings, if CN firmware can install google service? thanks to reply !
Ksrs1 said:
Method 1(Works with locked bootloader)(Convert China Rom to Global)
Part 1
1. Download Global rom Android 10 zip file(You can check wga0's thread for this thanks to wga0 for this file)
2. Put this zip file in ota folder of your internal storage and rename it as update.zip (if there is no ota folder than create it)
3. Dial *#*#1027#*#* click on Local ota and it will start updating your device.
4. Factory reset your device after perform above procedure to avoid any software error.
If above Part 1 don't work for you than try this method
1. Download Android 9 Full ota of china rom
2. Move it on ota folder of your phone's internal storage
3. Rename it to update.zip
4. Dial *#*#1027#*#*
5. Click on Local ota
6. After procedure is complete you might be in recovery mode of your device and in recovery mode wipe device data.By this method you will be downgrade to Android 9.
7. Using your phone's software update install two update first of 87MB and another of 1357MB.
8. After installing this two update just follow part 1 posted above and yoy will be able to install global rom on your china device.
Above method i found on another forum and working on bs2 pro and will also work on bs2 as well.
Below method is tested by me and it's working fine and i converted my device's Global rom to china rom and will also work for converting china rom to global.
Method 2(Require unlocked bootloader)
1.Download rom which you want to install and extract folder in it (there should be 22 img files in it)
2.Download flash-all.zip and extract flashall.bat to the folder in which 22 img files are available
3.Reboot your device to fastboot
4.Double click on flashall.bat file and it will start flashing rom.
Note:Above method will wipe your data.
Click to expand...
Click to collapse
i am newer at here , can i ask about where to find wga0 ? is search at this forum or google seach it?, so sry stupid question!
Ksrs1 said:
Method 1(Works with locked bootloader)(Convert China Rom to Global)
Part 1
1. Download Global rom Android 10 zip file(You can check wga0's thread for this thanks to wga0 for this file)
2. Put this zip file in ota folder of your internal storage and rename it as update.zip (if there is no ota folder than create it)
3. Dial *#*#1027#*#* click on Local ota and it will start updating your device.
4. Factory reset your device after perform above procedure to avoid any software error.
If above Part 1 don't work for you than try this method
1. Download Android 9 Full ota of china rom
2. Move it on ota folder of your phone's internal storage
3. Rename it to update.zip
4. Dial *#*#1027#*#*
5. Click on Local ota
6. After procedure is complete you might be in recovery mode of your device and in recovery mode wipe device data.By this method you will be downgrade to Android 9.
7. Using your phone's software update install two update first of 87MB and another of 1357MB.
8. After installing this two update just follow part 1 posted above and yoy will be able to install global rom on your china device.
Above method i found on another forum and working on bs2 pro and will also work on bs2 as well.
Below method is tested by me and it's working fine and i converted my device's Global rom to china rom and will also work for converting china rom to global.
Method 2(Require unlocked bootloader)
1.Download rom which you want to install and extract folder in it (there should be 22 img files in it)
2.Download flash-all.zip and extract flashall.bat to the folder in which 22 img files are available
3.Reboot your device to fastboot
4.Double click on flashall.bat file and it will start flashing rom.
Note:Above method will wipe your data.
Click to expand...
Click to collapse
Hi. I can't find any ROM with the 22 .img files, where could an image of that type be downloaded?
Thanks for the post
I have black shark 2 pro
My rom is china and my android is 10
I want to convert it to global rom with android 9
But with ota my sensors not working and I must update my android again.
Could anyone please help me?
OTA ERROR
I followed all your steps, but it always give me OTA ERROR on step 5. what should I do?
ryuusei13760 said:
I followed all your steps, but it always give me OTA ERROR on step 5. what should I do?
Click to expand...
Click to collapse
What is build number of your rom?
Ksrs1 said:
What is build number of your rom?
Click to expand...
Click to collapse
AWM-A0
Joyui11 G66T2008030CN00MQ3
Wga0
Ksrs1 said:
Method 1(Works with locked bootloader)(Convert China Rom to Global)
Part 1
1. Download Global rom Android 10 zip file(You can check wga0's thread for this thanks to wga0 for this file)
2. Put this zip file in ota folder of your internal storage and rename it as update.zip (if there is no ota folder than create it)
3. Dial *#*#1027#*#* click on Local ota and it will start updating your device.
4. Factory reset your device after perform above procedure to avoid any software error.
If above Part 1 don't work for you than try this method
1. Download Android 9 Full ota of china rom
2. Move it on ota folder of your phone's internal storage
3. Rename it to update.zip
4. Dial *#*#1027#*#*
5. Click on Local ota
6. After procedure is complete you might be in recovery mode of your device and in recovery mode wipe device data.By this method you will be downgrade to Android 9.
7. Using your phone's software update install two update first of 87MB and another of 1357MB.
8. After installing this two update just follow part 1 posted above and yoy will be able to install global rom on your china device.
Above method i found on another forum and working on bs2 pro and will also work on bs2 as well.
Below method is tested by me and it's working fine and i converted my device's Global rom to china rom and will also work for converting china rom to global.
Method 2(Require unlocked bootloader)
1.Download rom which you want to install and extract folder in it (there should be 22 img files in it)
2.Download flash-all.zip and extract flashall.bat to the folder in which 22 img files are available
3.Reboot your device to fastboot
4.Double click on flashall.bat file and it will start flashing rom.
Note:Above method will wipe your data.
Click to expand...
Click to collapse
i tried this methode, on the screen show, error not authorized..
1.84 GB file on MEGA
mega.nz
jpmacapuna said:
1.84 GB file on MEGA
mega.nz
Click to expand...
Click to collapse
for bs2 pro or bs 2?
Yeah that image worked like a charm! Thank you so much!
Can we convert global to chnise bs2 ? With ota update (locked bootloader) ?
Please give me tutorial
ariewahyu said:
Can we convert global to chnise bs2 ? With ota update (locked bootloader) ?
Please give me tutorial
Click to expand...
Click to collapse
Yes we can and I've already done it.
I can't change from CN ROM to Global ROM, the version posted here by jpmacapuna doesn't work, package unauthorized.
My device is a Black Shark 2 Pro - DLT-A0 build version DLTR2010300CN00MQ4, any help please?
Thank you
Hi,
I succesfully unlocked my bootloader, now how can I change region /cust from a rubbish c55 to a more decent c432?
Thank you
DP FH said:
Hi,
I succesfully unlocked my bootloader, now how can I change region /cust from a rubbish c55 to a more decent c432?
Thank you
Click to expand...
Click to collapse
There are three variants:
(for Oreo only, and keep in mind, that OEMINFO changing will lock you bootloader again).
A/ use HwOTA Tool
HwOTA8-ANE
B/ install TWRP for Oreo
link:
TWRP-oreo-smart
Download OEMINFO C432 :
OEMINFO ANE-LX1C432
Unpack .zip file and transfer oeminfo .img file to the SD card
Using Firmware Finder for Huawei apk, search for Oreo ANE-LX1C432 . Select FullOTA-MF, download the three files. (For example: find ANE-LX1C432B178 No.230902, download update.zip, ANE-L21_hw_eu.zip and publick.zip.)
Rename update_data_*.zip to update_data_public.zip
Rename update_full_*.zip to update_all_hw.zip
Don't rename update.zip.
Download HuRUpdater.zip
http://www.mediafire.com/file/r14sor2g4cbugzw/HuRUpdater_0.4.zip
Prepare an folder on SD card, like so:
myupdate/
HuRUpdater.zip
update.zip
update_data_public.zip
update_all_hw.zip
Boot into TWRP, flash OEMINFO C432.img (- in TWRP select Flash image). Go back to the main TWRP's menu, select Install , select 'myupdate' file and tap the HuRUpdater.zip , confirm.
You may need to press Volume Down for HuRUpdater to continue!
Reboot system.
C/ Download Oreo Service ROM , e.g.
Service ROM 8.0.0.178
Unpack .zip archive, find dload file in Software folder and transfer it to the SD card without unpacking it.
Install TWRP over eRecovery (you will need Stock Recovery due to the dload method).
Flash OEMINFO C432 , go back to the main TWRP's panel and select Reboot > Power Off.
Use three button combo to flash Service ROM . The process will erase all your data and will lock the BL again!
Note: how to install TWRP over eRecovery:
- copy to SD card TWRP-oreo-smart.img
- Download and copy to SD card Oreo Stock recovery~ramdisk :
Recovery_ramdisk
- in main TWRP menu tap Install image, then navigate
to the TWRP-oreo-smart.img, select
eRecovery Ramdisk and confirm . Go back, navigate to
Recovery_ramdisk-ANE-OREO.img , select Recovery Ramdisk and confirm.
How to boot into TWRP: reboot your phone, when unlocked bootloader warning appears, press Volume Up key up to 3 seconds to enter TWRP.
Thank you!
DP FH said:
Thank you!
Click to expand...
Click to collapse
Np
Just to let you know, even that I need a combination of method a and b. I finally rebranded my C461 version to the wanted C432. I've tried method A but ended with something like ( system.8.0.0(OSAV) ) with no update option.
I then used the files from this link to use them for method B to correct this issue:
http://update.dbankcdn.com/TDS/data/files/p3/s15/G2496/g1789/v225235/f1/full/update.zip
http://update.dbankcdn.com/TDS/data/files/p3/s15/G2496/g1789/v225235/f1/full/public/update_data_full_public.zip
http://update.dbankcdn.com/TDS/data/files/p3/s15/G2496/g1789/v225235/f1/full/ANE-L21_hw_eu/update_full_ANE-L21_hw_eu.zip
The phone now offers to upgrade and I also get the C432 in the build number. So one step further to custom roms or just stay on stock and get root to remove some bloatware...
Thank you Alf for your help!
Fall in love with Huawei again?
horqai said:
Thank you Alf for your help!
Click to expand...
Click to collapse
No problem.