Simple flashable zip to patch system audio on treble ROMS!
Credits:
Hmuny99
Phhusson
Schnedi
Thank you guys. You're amazing!
Tested and working!
DISCLAIMER: I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Link: https://github.com/hmuny99/GsiSystemAudioFix
Huh? What audio problem is there?
aLexzkter said:
Huh? What audio problem is there?
Click to expand...
Click to collapse
I had audio issues when I used the Pixel Experience GSI. The audio was distorted. I'll see if it works. Hopefully I can test it within the day.
Tested on Pixel Experiece GSI. Works like a charm. Can confirm :good:
haakufurou said:
Tested on Pixel Experiece GSI. Works like a charm. Can confirm :good:
Click to expand...
Click to collapse
How did you flash the pixel experience Rom. Steps can be helpful
Benfatica said:
How did you flash the pixel experience Rom. Steps can be helpful
Click to expand...
Click to collapse
Bruh, just flash like any other GSI...
Flash a base MIUI ROM or a MIUI vendor image if you have one. (I'm coming off of Xiaomi.EU's MIUI 10.3.12.)
Format Data. (Do this if you have previously booted MIUI. Ignore if you've just flashed it.)
Wipe Cache, Dalvik, and System.
Flash Pixel Experience IMG as a System Image.
Boot and setup your device.
Reboot to TWRP.
Flash the fixaudiogsi.zip file.
Reboot to System.
haakufurou said:
Tested on Pixel Experiece GSI. Works like a charm. Can confirm :good:
Click to expand...
Click to collapse
Hello!. Could you kindly check if Android Auto works on Pixel Exp. ROM?.
Thanks in advance.
haakufurou said:
Bruh, just flash like any other GSI...
Flash a base MIUI ROM or a MIUI vendor image if you have one. (I'm coming off of Xiaomi.EU's MIUI 10.3.12.)
Format Data. (Do this if you have previously booted MIUI. Ignore if you've just flashed it.)
Wipe Cache, Dalvik, and System.
Flash Pixel Experience IMG as a System Image.
Boot and setup your device.
Reboot to TWRP.
Flash the fixaudiogsi.zip file.
Reboot to System.
Click to expand...
Click to collapse
Thanks
currao said:
Hello!. Could you kindly check if Android Auto works on Pixel Exp. ROM?.
Thanks in advance.
Click to expand...
Click to collapse
My apologies. May I please know what to look for to tell that Android Auto is working? I don't really use it. I just need to know what to look for.
The app does run, BTW...
haakufurou said:
My apologies. May I please know what to look for to tell that Android Auto is working? I don't really use it. I just need to know what to look for.
The app does run, BTW...
Click to expand...
Click to collapse
"All you need" is a compatible car. I mean, a car where you could plug the phone with usb cable and check if android auto is launched in phone and showed in the screen car.
Many thanks
currao said:
"All you need" is a compatible car. I mean, a car where you could plug the phone with usb cable and check if android auto is launched in phone and showed in the screen car.
Many thanks
Click to expand...
Click to collapse
Oh, dear. Sorry. I don't really have a car. I know a few people but all they have are traditional faceplate car stereos. I can't help out with that.
haakufurou said:
Oh, dear. Sorry. I don't really have a car. I know a few people but all they have are traditional faceplate car stereos. I can't help out with that.
Click to expand...
Click to collapse
Many thanks anyway.
Enjoy weekend
Regards.
Enviado desde mi Mi 9T mediante Tapatalk
I just checked the source code repository. The zip file simply executes a single line of shell code:
> echo ro.audio.ignore_effects=true > /data/local.prop
I'd argue most people shouldn't need to boot into recovery to flash a zip, when they can execute a single line instruction.
haakufurou said:
I had audio issues when I used the Pixel Experience GSI. The audio was distorted. I'll see if it works. Hopefully I can test it within the day.
Click to expand...
Click to collapse
I heard that is a problem with bluetooth audio on Pixel Experience on Mi 9T. Is it true? It's big deal for me because I'm using my bt headphones everyday.
pok5 said:
I heard that is a problem with bluetooth audio on Pixel Experience on Mi 9T. Is it true? It's big deal for me because I'm using my bt headphones everyday.
Click to expand...
Click to collapse
I believe calls via bluetooth don't work. It's a GSI issue and not just a Pixel Experience one. Every GSI has it. Media through bluetooth, though (i.e. music, videos, games), work properly.
haakufurou said:
I believe calls via bluetooth don't work. It's a GSI issue and not just a Pixel Experience one. Every GSI has it. Media through bluetooth, though (i.e. music, videos, games), work properly.
Click to expand...
Click to collapse
Thanks, good to know. I don't need BT call since my mic's on my earphones are utter crap.
flubba86 said:
I just checked the source code repository. The zip file simply executes a single line of shell code:
> echo ro.audio.ignore_effects=true > /data/local.prop
I'd argue most people shouldn't need to boot into recovery to flash a zip, when they can execute a single line instruction.
Click to expand...
Click to collapse
I know, i'm the creator of the "zip", but since for a lot of people could be quite annoying to do so i made this zip to "simplify" the life of the enthusiast lazy modder
currao said:
Hello!. Could you kindly check if Android Auto works on Pixel Exp. ROM?.
Thanks in advance.
Click to expand...
Click to collapse
I'm also interested. AndroidAuto is not working on global/eu rom :crying:
Pheggas said:
Simple flashable zip to patch system audio on treble ROMS!
Click to expand...
Click to collapse
I tried to flash it on Lineage OS 16 GSI and it fixed the sound issues! It seems like the sound distortion issue appears right after LOS installation, without any additional modules / apps.
Thanks for your work, @hmuny99, @Pheggas.
What do u mean (flash it like a system image??)
Can u explain
Cuz i tried to install it but its bricked everytime
---------- Post added at 09:19 PM ---------- Previous post was at 09:17 PM ----------
haakufurou said:
Bruh, just flash like any other GSI...
Flash a base MIUI ROM or a MIUI vendor image if you have one. (I'm coming off of Xiaomi.EU's MIUI 10.3.12.)
Format Data. (Do this if you have previously booted MIUI. Ignore if you've just flashed it.)
Wipe Cache, Dalvik, and System.
Flash Pixel Experience IMG as a System Image.
Boot and setup your device.
Reboot to TWRP.
Flash the fixaudiogsi.zip file.
Reboot to System.
Click to expand...
Click to collapse
What do u mean (flash it like a system image??)
Can u explain
Cuz i tried to install it but its bricked everytime
Related
This isn't anything big.
Just a simple fix for audio not being transmitted through Bluetooth and a port of a few audio files from OOS 2.2.1 (it had better audio).
Here's the link
MEGA
https://mega.nz/#!xdY2XDgL!bUKZ0VAC-NhzvNwvQWu-ZG9D9fa_e_ZWAdRcabtgEDs
DRIVE
https://drive.google.com/file/d/0B-a0yH5iM61tblFEMWE3ZWd6anM/view?usp=docslist_api
It's a flashable zip.
Please do report back.
Credits:-
@alexis.bosman - for the OOS 2.2.1 audio files
Thank you.. Working Better with viper4android.. :good:
Worked like a charm, thank you so much! I finally have SkyDragon V4 working they way I need it to.
Hi, thanks for d share.
I'm unable to download using mega weblink.
If u don't mind, can u upload to any other cloud service?
Pls. Thanks
vinu4u4ever said:
Hi, thanks for d share.
I'm unable to download using mega weblink.
If u don't mind, can u upload to any other cloud service?
Pls. Thanks
Click to expand...
Click to collapse
OP updated
tejas999 said:
OP updated
Click to expand...
Click to collapse
Thank you... I appreciate that. Thanks.
MY PHONE WON'T SOFT REBOOT ANYMORE; PRAISE @tejas999 !!! Oh, Bluetooth audio works now, thanks man!
Sent from my ONE A2005 using Tapatalk
Edit: flashing this fixes Bluetooth BUT breaks headset AND speaker audio (for me at least)
I'm running the stock deodexed/debloated OOS 3.0 with divine beats audio MOD. Flashing this makes Bluetooth work but that's it, reverting breaks Bluetooth BUT all sounds works elsewhere... Hmm betas are great haha.
does it work wit the newest h2os?
Edit: it works without any problems (H2OS 1.4.0 debloated + v4a).
jmonster141 said:
MY PHONE WON'T SOFT REBOOT ANYMORE; PRAISE @tejas999 !!! Oh, Bluetooth audio works now, thanks man!
Edit: flashing this fixes Bluetooth BUT breaks headset AND speaker audio (for me at least)
I'm running the stock deodexed/debloated OOS 3.0 with divine beats audio MOD. Flashing this makes Bluetooth work but that's it, reverting breaks Bluetooth BUT all sounds works elsewhere... Hmm betas are great haha.
Click to expand...
Click to collapse
That's a problem of the audio files in my MOD clashing with the ones in Divinebeats.
Flash Divinebeats remover or dirty flash OOS 3 again and you'll be good to go.
Those custom Viper audio might contains additional files that was installed together buried in /system . It could be the cause why some people still have issues after flashing the fix
Sent from my ONE A2003 using Tapatalk
My energy BT3+ working now. Thank you!!!!
Sent from my ONE A2001 using XDA Free mobile app
Hi !
Did any of you got an error while wanted to flash ?
i downloaded the .zip from my mac and then put it the storage and tried to flash it but i got this message "flashing failed" (something like that)
i updated OOS 3.0 the dirty way... maybe this is the problem.
i'm trying to update again with wipe and everything and then i will try to flash the .zip for the bluetooth again... we'll see.
installation failed..... anyone ?
roukin said:
installation failed..... anyone ?
Click to expand...
Click to collapse
My flash failed as well
roukin said:
installation failed..... anyone ?
Click to expand...
Click to collapse
bubbobtaito said:
My flash failed as well
Click to expand...
Click to collapse
Which recovery are you using?
Also check if the zip is corrupted (bad download)
tejas999 said:
Which recovery are you using?
Also check if the zip is corrupted (bad download)
Click to expand...
Click to collapse
I downloaded it twice, once from mega and the other from google drive.
The recovery is the one that was installed by OP i guess. it is not TWRP that, i'm sure !
roukin said:
I downloaded it twice, once from mega and the other from google drive.
The recovery is the one that was installed by OP i guess. it is not TWRP that, i'm sure !
Click to expand...
Click to collapse
You need TWRP to flash this zip :/
tejas999 said:
You need TWRP to flash this zip :/
Click to expand...
Click to collapse
Ahh...that's what I'm missing
any quick solution to install twrp ?
Work perfect. I'm very happy.
Thanks a lot
Pixel Experience for treble devices.
Share these link to install The version of Android P in our MI Note 2. I tested it and it works until now quite fluid.
DON'T FLASH GAPPS, ALREADY INCLUDED
Download link: https://github.com/EnesSastim/Downl...A-2018-08-31/PixelExperienceP-arm64-aonly.zip
Instructions for installation: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
new build the problem detection card corrected sim recognizes them
the bad the camera does not work and is slow.
Download link: https://github.com/EnesSastim/Downl...A-2018-09-20/PixelExperienceP-arm64-aonly.zip
sgt_peppers said:
Pixel Experience for treble devices.
Share these link to install The version of Android P in our MI Note 2. I tested it and it works until now quite fluid.
DON'T FLASH GAPPS, ALREADY INCLUDED
Download link: https://github.com/EnesSastim/Downl...A-2018-08-31/PixelExperienceP-arm64-aonly.zip
Instructions for installation: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Click to expand...
Click to collapse
The sim card it's not working in my case ..any suggestion?
Xiaby said:
The sim card it's not working in my case ..any suggestion?
Click to expand...
Click to collapse
Not in my particular case. Maybe flashing magisk?
sgt_peppers said:
Not in my particular case. Maybe flashing magisk?
Click to expand...
Click to collapse
Nope, I just flashed the latest fw 8.8.30 then the treble enable zip file followed by the rom .. maybe I will try it again thank you.
Ps there are still the double voice while phone calling and the switch camera which requires 30 sec bugs in this rom?
Xiaby said:
Nope, I just flashed the latest fw 8.8.30 then the treble enable zip file followed by the rom .. maybe I will try it again thank you.
Ps there are still the double voice while phone calling and the switch camera which requires 30 sec bugs in this rom?
Click to expand...
Click to collapse
works perfect just that you notice the temperature is somewhat high at times
sgt_peppers said:
works perfect just that you notice the temperature is somewhat high at times
Click to expand...
Click to collapse
Thank you trying it later
Xiaby said:
Thank you trying it later
Click to expand...
Click to collapse
Restart my device and now the SIM does not recognize me
sgt_peppers said:
works perfect just that you notice the temperature is somewhat high at times
Click to expand...
Click to collapse
could ytou please share a link to the latest firmware? I cannot seem to find it on this site?
CAn i just use TWRP?
Experts Please answer this. The rotation is :
Wipe data , system , cach ,delvik
Flash Treble
Flash image of Android P ?
If this is the order, this rom doesn't work . It says password correct, Data decrypted but seems corrupted
Andrikkos said:
Experts Please answer this. The rotation is :
Wipe data , system , cach ,delvik
Flash Treble
Flash image of Android P ?
If this is the order, this rom doesn't work . It says password correct, Data decrypted but seems corrupted
Click to expand...
Click to collapse
Before you flash Treble, you need to have the right firmware/MIUI rom flashed. The MN2 Treble thread should give you an indication what is the minimum version to use. I used the latest 8.8.30 EU multi rom and that works fine with Treble. I had no luck with any of the P GSI images though. They all had some kind of shortcoming that was a deal breaker for a daily driver. Most notably due to most if not all P GSI images being rooted, could not get Magisk to hide it well enough to get Google Pay to work. I used up to the latest (v 17) Magisk image that works with Treble. I also had an other app I need for work (Concur) that would not work for the same reason. There is also overheating and battery drain issues with most GSI images. I tried many over a day and a half of stuffing around with Treble. I am now back on the above mentioned EU rom. Treble is too young for my needs just yet. Better luck to you.
The_real_hati said:
Before you flash Treble, you need to have the right firmware/MIUI rom flashed. The MN2 Treble thread should give you an indication what is the minimum version to use. I used the latest 8.8.30 EU multi rom and that works fine with Treble. I had no luck with any of the P GSI images though. They all had some kind of shortcoming that was a deal breaker for a daily driver. Most notably due to most if not all P GSI images being rooted, could not get Magisk to hide it well enough to get Google Pay to work. I used up to the latest (v 17) Magisk image that works with Treble. I also had an other app I need for work (Concur) that would not work for the same reason. There is also overheating and battery drain issues with most GSI images. I tried many over a day and a half of stuffing around with Treble. I am now back on the above mentioned EU rom. Treble is too young for my needs just yet. Better luck to you.
Click to expand...
Click to collapse
Can you share the firmware link ?
Andrikkos said:
Can you share the firmware link ?
Click to expand...
Click to collapse
https://xiaomi.eu/community/
The_real_hati said:
https://xiaomi.eu/community/
Click to expand...
Click to collapse
yes finally lol. Thanks a bunch i could not find the firmware anywhere
---------- Post added at 06:44 AM ---------- Previous post was at 06:38 AM ----------
The_real_hati said:
https://xiaomi.eu/community/
Click to expand...
Click to collapse
Mate? No firmware/ Just another site link to get lost in? :-\
Bryceicle1971 said:
Mate? No firmware/ Just another site link to get lost in? :-\
Click to expand...
Click to collapse
Forums/MIUI ROM releases, self explanatory really. Same forum concept as it is here at XDA. I'm not going to link directly to the download because you should be doing some homework about suitability for your needs.
The_real_hati said:
Forums/MIUI ROM releases, self explanatory really. Same forum concept as it is here at XDA. I'm not going to link directly to the download because you should be doing some homework about suitability for your needs.
Click to expand...
Click to collapse
pmsl. 'junior member' just like me its easier to be humble an admit you made a mistake an do not understand my issue or do not have the info I need
Bryceicle1971 said:
pmsl. 'junior member' just like me its easier to be humble an admit you made a mistake an do not understand my issue or do not have the info I need
Click to expand...
Click to collapse
Piss off "mate", you wouldn't know the first thing about me. You did NOT ask for the link, Andrikkos did. Don't see him complaining. Get your threads right dumbass
https://androidfilehost.com/?fid=1322778262903998408
The_real_hati said:
Piss off "mate", you wouldn't know the first thing about me. You did NOT ask for the link, Andrikkos did. Don't see him complaining. Get your threads right dumbass
Click to expand...
Click to collapse
Whatever. Your being obnoxious. Given up on Android P. Overheats an RIL issues. Every time. And you just proved my point
sgt_peppers said:
Restart my device and now the SIM does not recognize me
Click to expand...
Click to collapse
Did yuo find any solution?
I compiled the GSI overnight, its aosp_arm64_a Legacy GSI, because the ones I keep downloading are all August security patch and I wanted it a little more up to date. I got the source directly from google and built it myself. AB is now uploaded as aosp_arm64_ab. A only is also up as aosp_arm64_a-aosp. I ran it on my One Plus 5, NFC was buggy but the camera, ril, Bluetooth, wifi, and everything I tried out worked. this is vanilla, so its bare bones. no apps besides the basics, no mods or any customizing. As this is a GSI it should be useable on many devices, I can only help you with the devices that I own, pixel XL and one plus 5. If you have a device other then that, you will have to find help from someone knowledgeable about that device. I have had success using twrp and fastboot to flash the system image. I was told doing it via fastboot is the best, so you can disable verified boot, then flash, then format all in one shot. My device did not require me to disable the verify boot. From my end it was literally as simple as 3 commands via fastboot and then restart the device and I was in. I flashed a 50mb gapps package from xda here, and magisk. took some photos, connected my Bluetooth speaker, made a call. sent some texts, installed a few apps. I will be staying on stock. But only because my device has stock pie, and the theming from one plus far trumps google.
aosp_arm_a-userdebug and aosp_arm_ab-userdebug added
https://mega.nz/#F!Xh4g2KSB!EJIGQtvLFKzHzqKXmZI7tg
Sources: https://source.android.com/setup/build/gsi
Do you find it smoother than HOS Pie Beta ?
Thanks for your share! Awesome, I don't need/use NFC.
korm85 said:
Do you find it smoother than HOS Pie Beta ?
Click to expand...
Click to collapse
It's very fast. install and boot was very fast. but I just discovered my home button does not work. however I don't assume that would be a difficult fix. the back and pages button are working. its very bare tho, you need to install everything you want manually. Which I prefer, it gives me more control over my phone I find. Hydrogen works ok too, it just requires a bit of work to get play store going and remove all the bloatware. GSI camera worked fine from boot.
Dzol Cp said:
Thanks for your share! Awesome, I don't need/use NFC.
Click to expand...
Click to collapse
upload is at finished now
can a mod change the title to reflect that this will have the AB and A GSI not just A? Please and thank you.
Thanks! Any chance of an arm build?
Got no boot ......?!
Device's nubia z17 sd835
91egt said:
Thanks! Any chance of an arm build?
Click to expand...
Click to collapse
yea, it will be up in the morning. I did A and just about done AB for arm64, then will do A and AB arm
aljoscha81 said:
Got no boot ......?!
Device's nubia z17 sd835
Click to expand...
Click to collapse
how did you flash it? I didnt use trwp, I used fastboot from the pc
godkingofcanada said:
how did you flash it? I didnt use trwp, I used fastboot from the pc
Click to expand...
Click to collapse
Maybe thats the matter i always use twrp but got..... So far never problems ....?
Make it a difference?
aljoscha81 said:
Maybe thats the matter i always use twrp but got..... So far never problems ....?
Make it a difference?
Click to expand...
Click to collapse
It shouldn't. But its twrp. Weird things happen. Use fastboot. Its only 3 or 4 steps. The tutorial is on the google gsi website. I tried via twrp and had no issues however. It started to launch then rebooted, second boot it loaded OK
Cracked screen. But you can see the build info
godkingofcanada said:
Cracked screen. But you can see the build info
Click to expand...
Click to collapse
Ok.. will test out with fastboot thanks a lot!
aljoscha81 said:
Ok.. will test out with fastboot thanks a lot!
Click to expand...
Click to collapse
No problem
AB will be posted in about 2-3 hours. After that I will build A only Arm. It should be available by morning.
a/b please
irfaniphank2 said:
a/b please
Click to expand...
Click to collapse
Aosp_arm64_ab-userdebug will be on the link in post 1 in about 90 min. Its 90% done building.
godkingofcanada said:
Aosp_arm64_ab-userdebug will be on the link in post 1 in about 90 min. Its 90% done building.
Click to expand...
Click to collapse
:good::good::good::good::good::highfive::highfive::highfive:
AB arm64 legacy is now uploaded to the link in post one. Arm A and AB will show up over night. Starting with a in the morning. It takes about 4.5 to 5 hours to build
So we have official 9.0 update now, which means we have pie vendor installed our devices.
However, it seems non of GSI pie roms work on xz1 even though our vendor and kernel are working properly with pie firmware.
Is there anyone successfully installed 9.0 GSI rom after the official Pie update? Or is there any idea why they don't work?
Riskypedia said:
So we have official 9.0 update now, which means we have pie vendor installed our devices.
However, it seems non of GSI pie roms work on xz1 even though our vendor and kernel are working properly with pie firmware.
Is there anyone successfully installed 9.0 GSI rom after the official Pie update? Or is there any idea why they don't work?
Click to expand...
Click to collapse
everything is working fine on GSI 9.0 pie roms but if u need gcam, flash on aosp boot and vendor(because full camera2api and raw support), on stock blobs gcam doesnt work because there is no raw support on stock.
arslancn said:
everything is working fine on GSI 9.0 pie roms but if u need gcam, flash on aosp boot and vendor(because full camera2api and raw support), on stock blobs gcam doesnt work because there is no raw support on stock.
Click to expand...
Click to collapse
Thanks for your reply Can you suggest some roms that worked? Because whenever I try to boot my phone with this rom(https://forum.xda-developers.com/pr...opment-a-only-roms/ported-p-sgsi-pr2-t3845789), I get bootlooped
Riskypedia said:
Thanks for your reply Can you suggest some roms that worked? Because whenever I try to boot my phone with this rom(https://forum.xda-developers.com/pr...opment-a-only-roms/ported-p-sgsi-pr2-t3845789), I get bootlooped
Click to expand...
Click to collapse
try any updated ''GSI''(not sGSI) arm64 a only rom from here. sGSI roms have alot of bugs
arslancn said:
try any updated ''GSI''(not sGSI) arm64 a only rom from here. sGSI roms have alot of bugs
Click to expand...
Click to collapse
Thanks to your support, I've got finally found a working rom(Pixel Experienced Rom)! Maybe I think the roms I've tried are all sGSI roms that caused bootloops
Now I'm trying to use gcam now, so I've installed pie aosp vendor uploaded in sony open device project(fasboot flash oem ~~~.img). However, it seems it doesn't have problem with booting but gcam still crashes(I think it's cam2api problem). According to your previous comment, it seems I should flash aosp kernel which isn't provided by Sony. So should I manually compile the kernel to make it working?
Sorry for bothering :crying:
Riskypedia said:
Thanks to your support, I've got finally found a working rom(Pixel Experienced Rom)! Maybe I think the roms I've tried are all sGSI roms that caused bootloops
Now I'm trying to use gcam now, so I've installed pie aosp vendor uploaded in sony open device project(fasboot flash oem ~~~.img). However, it seems it doesn't have problem with booting but gcam still crashes(I think it's cam2api problem). According to your previous comment, it seems I should flash aosp kernel which isn't provided by Sony. So should I manually compile the kernel to make it working?
Sorry for bothering :crying:
Click to expand...
Click to collapse
use this guide and build needed AOSP images, flash all of them (boot.img, vendor.img, system.img and SODP OEM image too)
reboot one time, after u see setup, reboot recovery and make full wipe(system, data, cache, dalvik, internal), format data and reboot recovery
flash gsi image and gapps(if gapps not included)
reboot recovery, flash magisk and reboot.
now u have aosp rom with working gcam
arslancn said:
use this guide and build needed AOSP images, flash all of them (boot.img, vendor.img, system.img and SODP OEM image too)
reboot one time, after u see setup, reboot recovery and make full wipe(system, data, cache, dalvik, internal), format data and reboot recovery
flash gsi image and gapps(if gapps not included)
reboot recovery, flash magisk and reboot.
now u have aosp rom with working gcam
Click to expand...
Click to collapse
which version of gcam works?
arslancn said:
use this guide and build needed AOSP images, flash all of them (boot.img, vendor.img, system.img and SODP OEM image too)
reboot one time, after u see setup, reboot recovery and make full wipe(system, data, cache, dalvik, internal), format data and reboot recovery
flash gsi image and gapps(if gapps not included)
reboot recovery, flash magisk and reboot.
now u have aosp rom with working gcam
Click to expand...
Click to collapse
Thank you bro, everything works fine! I think I should pack the built images and upload in case someone needs this XD
Respect to Turkey, from Korea.
Riskypedia said:
Thank you bro, everything works fine! I think I should pack the built images and upload in case someone needs this XD
Respect to Turkey, from Korea.
Click to expand...
Click to collapse
:highfive: u can make a thread about flashing treble with full cameraapi 2 support and share your images with other XZ1 users!
Riskypedia said:
Thank you bro, everything works fine! I think I should pack the built images and upload in case someone needs this XD
Respect to Turkey, from Korea.
Click to expand...
Click to collapse
did you have same bug on XZ1?
the battery level always in 20%.
arslancn said:
:highfive: u can make a thread about flashing treble with full cameraapi 2 support and share your images with other XZ1 users!
Click to expand...
Click to collapse
Sadly, it seems it's impossible to use AOSP based system because of its stability. It's way too unstable to use, but I think I can share the built images to make progress! Again, thanks for your help
gacky1601 said:
did you have same bug on XZ1?
the battery level always in 20%.
Click to expand...
Click to collapse
I've never experienced the bug when I used that. Did that happen to your XZ1? Or is it the problem of the other Xperia devices? The biggest problem was that it's too unstable that I can barely use that. The network oftenly disconnects and randomly reboots itself.
Riskypedia said:
I've never experienced the bug when I used that. Did that happen to your XZ1? Or is it the problem of the other Xperia devices? The biggest problem was that it's too unstable that I can barely use that. The network oftenly disconnects and randomly reboots itself.
Click to expand...
Click to collapse
Yes,my device is G8342. The wifi bug and battery level bug.
my device couldn't connect to any wifi,but sharing hotspot in 2.4ghz/5ghz was fine.
Screen colors look strange.
Randomly reboot,too.
I don't know any solution.
I only knew the methods to the image step by step from Sony's source.
Maybe we should build the kernel by ourselves
The problem you mentioned about disconnecting network, does it happens on wifi or mobile data?
Sorry, just a quick question has as resurrection remix has a treble room out, has anyone tried it?
gacky1601 said:
Yes,my device is G8342. The wifi bug and battery level bug.
my device couldn't connect to any wifi,but sharing hotspot in 2.4ghz/5ghz was fine.
Screen colors look strange.
Randomly reboot,too.
I don't know any solution.
I only knew how to build the image step by step from Sony's source.
Maybe we should build the kernel by ourselves[/QUOTE
Yeah, we should... I'm just a newbie developer, and really sad that we're lack of developers who can help XZ1 users, but I believe one day users make this out together. The dispaly color is because of AOSP's default display color temperature, maybe we can fix this out by touch some configs of kernel
Click to expand...
Click to collapse
lilbrat said:
Sorry, just a quick question has as resurrection remix has a treble room out, has anyone tried it?
Click to expand...
Click to collapse
I think you can just try it with stock boot , vendor and oem.
I will works perfectly.
Don't forget to report if there is any problem or it work properly.
---------- Post added at 04:37 PM ---------- Previous post was at 04:20 PM ----------
[/QUOTE
Yeah, we should... I'm just a newbie developer, and really sad that we're lack of developers who can help XZ1 users, but I believe one day users make this out together. The dispaly color is because of AOSP's default display color temperature, maybe we can fix this out by touch some configs of kernel [/QUOTE]
Yeah. I think there are a few developers work on XZ1.
Have .
The working perfectly rom will be our target, like the thread below.
https://forum.xda-developers.com/xperia-xz1-compact/how-to/xz1c-g8441-lilac-aosp8-1-t3762581
Share your all files so that i can work with gcam to be installed properly to latest pixel experience.
Hi everyone, I've been trying to find a custom rom for Xiaomi Mi 12X, but none found so far. I tried to port Pixel Experience rom using the Xiaomi Mi 11X (alioth) device tree and changed accordingly, since the SOC and almost all specs are the same except Camera. Can anybody shed some light in how to correctly port the ROM for my devices without official device tree from LineageOS or Pixel Experience? Thank you.
Anybody has any suggestions?
JChanMe said:
Anybody has any suggestions?
Click to expand...
Click to collapse
Hi, right now I'm using crdroid gsi, which works pretty good. Except of fp, everything works as it should. It's smooth, has a good bb and even MGC's Gcam 8.1, last stable, works incl. portrait, nightmode and with all lenses (ok, no pixelbinning). Installing is pretty simple: use fastbootd and just fash img to system. That's it....
Voodoojonny said:
Hi, right now I'm using crdroid gsi, which works pretty good. Except of fp, everything works as it should. It's smooth, has a good bb and even MGC's Gcam 8.1, last stable, works incl. portrait, nightmode and with all lenses (ok, no pixelbinning). Installing is pretty simple: use fastbootd and just fash img to system. That's it....
Click to expand...
Click to collapse
Thank you but I don't see it on crdrood website, did you build it yourself?
JChanMe said:
Thank you but I don't see it on crdrood website, did you build it yourself?
Click to expand...
Click to collapse
It's a gsi treble rom (that works with many vendors)... Just search for project treble on xda!
Voodoojonny said:
It's a gsi treble rom (that works with many vendors)... Just search for project treble on xda!
Click to expand...
Click to collapse
Thank you. I figured it out and tried a few treble roms including pixel experience, there are a few problems including auto brightness, fingerprint and vibrator. You had the same problems?
JChanMe said:
Thank you. I figured it out and tried a few treble roms including pixel experience, there are a few problems including auto brightness, fingerprint and vibrator. You had the same problems?
Click to expand...
Click to collapse
Yes, especially the sound makes problems... When usung videocall, it's awfully distorted. I'm using stock for now. With Lawnchair and some modifications it's ok for now.
Do you know, why there's no thread for our phone here?
Just seen, you are forking some repositories... Have you been successful in building?
Voodoojonny said:
Just seen, you are forking some repositories... Have you been successful in building?
Click to expand...
Click to collapse
I successfully build the ROM without errors, just some warnings, but it didn't boot aftter flashing it.
JChanMe said:
I successfully build the ROM without errors, just some warnings, but it didn't boot aftter flashing it.
Click to expand...
Click to collapse
Did you flash with vendor or system only?
Voodoojonny said:
Did you flash with vendor or system only?
Click to expand...
Click to collapse
No, I used the same procedure as described for Alioth device, fastboot flash boot boot.img, then from recovery use adb push to update the zip ROM file.
JChanMe said:
No, I used the same procedure as described for Alioth device, fastboot flash boot boot.img, then from recovery use adb push to update the zip ROM file.
Click to expand...
Click to collapse
But how did you built the rom. Did you get out a flashing zip directly? Normally, you create different partitions as fas as I know... Would you share your rom? Btw. which one did you build?
Voodoojonny said:
But how did you built the rom. Did you get out a flashing zip directly? Normally, you create different partitions as fas as I know... Would you share your rom? Btw. which one did you build?
Click to expand...
Click to collapse
Yes, after building I got a zip and flashing it using update by adb push. I built Pixel Experience Android 11
JChanMe said:
Yes, after building I got a zip and flashing it using update by adb push. I built Pixel Experience Android 11
Click to expand...
Click to collapse
But you used the lineage device tree. And PE is aosp not lineage. Might that be the problem? Would you try to build crdroid? Or instruct me how to setup a build environment?
No, I used the PE device tree, not Lineage. I used the build instructions provided by Pixel Experience for Alioth.
JChanMe said:
Anybody has any suggestions?
Click to expand...
Click to collapse
Yesterday xiaomi released kernel for 12x on GitHub. So I think now you can build pe/los without troubles
Maxletsplay_1 said:
Yesterday xiaomi released kernel for 12x on GitHub. So I think now you can build pe/los without troubles
Click to expand...
Click to collapse
Didn't they release the kernel when the phone was released?
JChanMe said:
Didn't they release the kernel when the phone was released?
Click to expand...
Click to collapse
Technically yes, but i've checked GitHub(about month ago) and I didn't saw kernel for this phone, just an empty folder
JChanMe said:
Didn't they release the kernel when the phone was released?
Click to expand...
Click to collapse
Did you replaced vendor libs with libs from 12x and other stuff like fstab, bins, rc files..configs? Attach logs from boot if you decide to build again. My advice is to build as eng and disable encryption, put selinux to minimal mode, nuke livedisplay, import vendor modules if you build with stock prebuilt kernel. Always look for F Linker errors in log and resolve them.
I'm waiting for AOSP rom too.