Hello everyone.
I'm currently using OP6-O2_beta_21 on my phone and i want to go back to stock rom.
I did the usual steps
1- shutdown phone
2- put phone on fastboot
3- connect to pc using the original cable(tried different ports usb 2 and also 3)
4- Open Xiaomi Mi Flash(using 2017.4.25.0)
5- When i click the REFRESH button on MiFlash my phone just "quit" the fastboot screen and a small text appears on the phone :
TAP KEY TO SHUTDOWN.
I tried a lot of times on my desktop and my notebook and it did not worked.
After I tried going to TWRP to flash a custom rom but after I did the wipes/factory reset and rebooted the phone on TWRP now the Touch do not work on TWRP( when i boot the phone again on OOS the touch works)
Now after this reset my OOS is really bugged and i can't even login on play store
Anyone can help?
dimelus said:
Hello everyone.
I'm currently using OP6-O2_beta_21 on my phone and i want to go back to stock rom.
I did the usual steps
1- shutdown phone
2- put phone on fastboot
3- connect to pc using the original cable(tried different ports usb 2 and also 3)
4- Open Xiaomi Mi Flash(using 2017.4.25.0)
5- When i click the REFRESH button on MiFlash my phone just "quit" the fastboot screen and a small text appears on the phone :
TAP KEY TO SHUTDOWN.
I tried a lot of times on my desktop and my notebook and it did not worked.
After I tried going to TWRP to flash a custom rom but after I did the wipes/factory reset and rebooted the phone on TWRP now the Touch do not work on TWRP( when i boot the phone again on OOS the touch works)
Now after this reset my OOS is really bugged and i can't even login on play store
Anyone can help?
Click to expand...
Click to collapse
try installing google play service maybe then u can login
i am using this twrp 3.3.3-1 unofficial
for those who have touch problem in twrp
https://mega.nz/#F!bdwQVIyK!OWNLH72HNT-ecmC-vAVmPw
i would suggest you to put proper vendor + firmware and flash lineageOS first! then try putting back your fav custom rom
https://mirror.akhilnarang.me/MIUI/beryllium/ ( i am using 9.6.27-9)
Related
Hi, all
I was running kitkat on my tablet so I decided to flash with CM13 custom rom I used DP TOOLS to rooted my tablet after that I used Flashify to installed TWRP at that point everything were nice and happy, then I installed gapps-600-base-20151112-1-signed.zip, cm-13.0-20160604-NIGHTLY-v410.zip, BETA-SuperSU-v2.74-2-20160519174328.zip using TWRP at that point everything installed without any error, I rebooted the tablet and now its stuck to LG logo with "error boot certification verify" after pressing power and volume up button I was able to get in download mode, but DP tools doesn't recognized tablet using my PC so I'm wondering how to installed rom back again since I cant get TWRP to load and why am I get this "error boot certification verify" anyway. Any help will be very helpful. Thanks
i fixed it using these steps, Thanks
1. You will need the Stock Rooted ROM: [ROM][STOCK](V410 ONLY)KOT49I.V4101d | 4.4.2… | LG G Pad 10.1 | XDA Forums
2. Stock Recovery Image: https://onedrive.live.com/redir?resi...int=file,img
[OPTIONAL]
- I downloaded the USB Driver suite so I can make sure it all connects and works, this really is optional, but I would HIGHLY suggest it!
LG Software & Firmware | LG U.S.A
- I also download this nifty tool called DP Tools by danielpinto8zz6 over at XDA. This just made it a lot easier to reboot to recovery and all that fun stuff.
[Tool][Win] DP TOOLS - Manage your LG device | LG G Pad 10.1 | XDA Forums
[MANUAL RECOVERY]
If you do not want to install the drivers and DP Tools, you can reboot to recovery using the following method:
1. Power OFF your device and unplug from USB
2. Press Vol-Down + Power and HOLD until you see the LG Logo (will only take a couple seconds)
3. Let go of the POWER button ONLY
4. Keep holding the Vol-Down, then also press Power + Vol-Up (so you should now be holding ALL 3 BUTTONS)
5. Wait for recovery mode to start and you can let go of the buttons
[THE PROCESS]
1. Copy the ROM and Recovery Image to to SD Card or Internal Storage of your device
2. Reboot to Recovery
3. Wipe, Wipe, Wipe
4. Flash the Stock Rooted ROM
5. Reboot and set up your device far enough for you to get into the Play Store and download an App
6. Download Flashify: https://play.google.com/store/apps/d...llner.flashify
7. Launch the app and flash your stock recovery
8. DO NOT REBOOT YET (however, if you do reboot, it's really not an issue)
9. Open the Super User app that is already installed
10. Go into Settings and then find the In-Root (Uninstall) option and you will get a warning that Root will be removed
11. Complete the instructions on the screen and you are now back to stock
[TROUBLESHOOTING]
- If SU will not uninstall and just hangs, restart the device and try again
- If the ROM starts acting strange, Factory Restore (this did not happen to me, but happened to a friends and reset fixed it all)
Please let me know if anyone has any questions!!
Thanks!
Quick reply to this message Reply
zfk110 said:
Hi, all
I was running kitkat on my tablet so I decided to flash with CM13 custom rom I used DP TOOLS to rooted my tablet after that I used Flashify to installed TWRP at that point everything were nice and happy, then I installed gapps-600-base-20151112-1-signed.zip, cm-13.0-20160604-NIGHTLY-v410.zip, BETA-SuperSU-v2.74-2-20160519174328.zip using TWRP at that point everything installed without any error, I rebooted the tablet and now its stuck to LG logo with "error boot certification verify" after pressing power and volume up button I was able to get in download mode, but DP tools doesn't recognized tablet using my PC so I'm wondering how to installed rom back again since I cant get TWRP to load and why am I get this "error boot certification verify" anyway. Any help will be very helpful. Thanks
Click to expand...
Click to collapse
just flash ur stock rom
Hi all,
I unblocked my honor 7 PLK-L01 okay,
but when i tried to flash the superSU, to get rooted, after reboot, it never wants to reboot.
I tried:
1- I tried like the manual saying, (press volumeUp+volumeDown+power), then after the first image, i release the power and keep up+down presses,
But instead of going to recovery, the phone keep restarting.
2- i tried to press volumeUp+power, then keep pressing on volumeUp, but also the phone keep restarting,
How ever I can go to bootloader mode, if i press voluemDown.
but when i flashed another twrp, nothing change.
Can someone help please, the phone even stuck on the starting, and can't be recognized as mtp on compter,
or can't goto recovery_mode
Thank you in advance
i think you are kinda messed it up..
you should not flash any thing except stock firmware using emui recovery..
only solution: try and flash twrp again and again to check if it installed correctly.. or send a pic of what it says in the command window when you try to flash twrp..
or you can even try to put an update.app under a dload folder of your sd card and try to flash(do it if you have emui recovery..remember try any other firmware.. not the one you alredy tried)
you should always read forums and look into various things you are not sure about before you even download superSU.zip.... you should try install twrp do full wipe and install rom THEN reboot and you should be fine. make sure that rom is made for your device...
Hello all,
First of all, as a disclaimer: I am a total noob in this area. I just got my Ulefone T1, and tried to root it by installing TWRP and then installing SuperSU using TWRP. When I first installed TWRP, it worked and I got into the TWRP recovery menu. However, as the phone had to be wiped, I couldn't install the SuperSU zip anymore. I did a normal reboot to transfer the SuperSU zip to my phone, but when I then tried to turn my phone off and access TWRP, it went to normal recovery mode of my phone. As I wanted to start fresh off again, I went to the settings of my phone and did a factory reset silly.
Now, it is stuck in a bootloop where I can literally do nothing. I cannot access factory mode or recovery mode, all it does is just endlessly boot and turn off. I have managed to turn it off completely, but that's all I can do. Also, the battery is not removable.
Does anyone with a little more knowledge have a suggestion for me? Thanks in advance!
As an update, I got a suggestion to fully drain the battery, but that does not work either. I have tried connecting it to my PC, which is not working, but that was acting weird before. I guess it's just not possible?
did you work this out ? i am stuck in bootloop too ??????
Daviesjosh95 said:
did you work this out ? i am stuck in bootloop too ??????
Click to expand...
Click to collapse
I have no idea what software is necessary to do it for your device but you can flash stock rom, if it uses sp tool or something then download stock rom, use sp tool to flash it. Should be OK after that. As I am not familiar with this device I can't give you any other advice other than flashing stock rom.
Any solutions to unbricking/boot looping?
Have anyone found any solutions to unbricking phone??
Mine also did bootlooping after unlocking bootloader.
I was able to flash successfully but screen fussy and unreadable and not able to touch. I am able to hear but lines are on screen.
I have same problem, please, anyone help, I think I used wrong twrp image
Ulefone T1 Bootloop solution 2019.
I was able to fix the bootloop of my ulefone t1, just flash it with sp flash tool by following this guide:
1. Download the Stock Firmware on your personal computer.
2. Install the USB MTK Drivers (skip if you have it already installed).
3. Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
4. Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
5. Select the Scatter File from the extracted Stock Firmware on your computer.
6. Select the Download Only in the SP flash tool option
7. Click the Download button to start the Formating process.
8. Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
9. Patiently wait for your device to be formatted.
10. After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
11. Unplug your device and boot it up.
12. If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
13. Voila, you are all good.
Very important step 8 of the guide.
Problem:
1.I had Resurrection Remix rom 7.1.2 installed with TWRP.
2. Tried to Install stock rom and stock recovery. Was able to install stock recovery but it was hanging in recovery. Could not move with volume buttons.
3. Then I tried flashing fastboot roms through miflashtool. Flashing was done successfully but nothing happens. It is now stuck on MI logo.
4. Mi logo only(No powered by android below or anything) It just restarts.
5. Cant go to recovery by any means tried everything.
6. Can only go to fastboot.
7. Adb does not detect device tried to install multiple times.
8. Cannot switch on Usb debuging since tablet wont boot even once.
9. I have no means to flash recovery as well.
Please help.
Have you found any solution
I am looking for a solution facing similar problem
I am looking for a solution facing a similar problem. Any help will be appreciated. I am able to reach fastboot and sun boot as well as recovery command successfully with twrp iso. but twrp is not loading after reboot and also trying to press vol up and power buttons.
chandidas said:
Have you found any solution
Click to expand...
Click to collapse
I was trying to install the AOSP recovery, tried to boot into it and now my phone's stuck on a screen that says, "The current image(boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it."
The phone's been on this screen for hours now
Thing is, using volume - and the power button isn't letting me enter fastboot mode. The phone's not turning on or off, and using volume + and the power button momentarily turns it off, shows the OnePlus logo for a second then returns to the same (image have been destroyed......) screen.
The MSM tool isn't working either, my phone's not entering EDL mode.
What do I do now? Visit customer service?
The phone's under warranty, if that makes any difference.
Alright, never mind, problem solved. For posterity, here's what I did:
1) Pressed volume + and the power button
2) As soon as the screen went black, pressed both volume buttons for 40 seconds, and the phone entered EDL mode
The MSM tool worked, and my phone's booting as I'm typing this. feelsgoodman
Glad it worked out in the end.
Yeah the MSMDownloadTool has saved my phone from getting bricked many times.
Don't try to install custom rom or recovery in oos 12 it will cause Qualcomm dumpcrash mode and other problem
AswiN prabhakaran said:
Don't try to install custom rom or recovery in oos 12 it will cause Qualcomm dumpcrash mode and other problem
Click to expand...
Click to collapse
How does one work past that?
I updated to OOS12 via the custom updater, and then reverted back to OOS11. Then I flashed PE recovery and ended up in the crashdump state. Same with Nameless. Any clue?
sgt. meow said:
How does one work past that?
I updated to OOS12 via the custom updater, and then reverted back to OOS11. Then I flashed PE recovery and ended up in the crashdump state. Same with Nameless. Any clue?
Click to expand...
Click to collapse
Alright, so here's what I did:
1. Flashed OOS 11 using the MSM tool
2. Downloaded the latest OOS 11 build from OnePlus' website and performed a local upgrade
3. Downloaded the AOSP extended recovery from their SourceForge page, codename lemonkebab
This recovery worked for me, but I didn't try flashing other ROMs with it except AEX (the ROM the recovery was specifically made for)
Samael690 said:
Alright, so here's what I did:
1. Flashed OOS 11 using the MSM tool
2. Downloaded the latest OOS 11 build from OnePlus' website and performed a local upgrade
3. Downloaded the AOSP extended recovery from their SourceForge page, codename lemonkebab
This recovery worked for me, but I didn't try flashing other ROMs with it except AEX (the ROM the recovery was specifically made for)
Click to expand...
Click to collapse
Works a charm
Thanks a ton!