3 Minit Battery for Android 10 - Google Pixel 2 XL Themes, Apps, and Mods

I've patched a way so that 3Minit can work on the Pixel 2 XL on Android 10.
This 3Minit mod can be found here:
https://github.com/gharrington/3Minit_Battery_Mod
All the batteries were made by the author's listed below and are freely available for download through the 3Minit Battery settings app at the link above.
The minitbatteryresources.apk must be installed to system/app instead of data/app like normal. I have included a magisk zip installer for that. If you aren't using my other Mod installer, there is a zip that will install the necessary smali-xml files as well as the minitbatteryresources apk. Once the apk is installed the necessary way, you can use the ADB installer to get any of the 3Minit batteries that are available from 3Minit. There is a readme.txt with explanations.
The installer works on all Pixel phones and has an installer for each including the 3a's but no batteries. It is around 400 mb. Batteries are downloaded separately due to the fact there are so many it would add another 450 mb.
Using the thumbs to find the battery you want you can download the batteries for that author.
You will need to find the author and number of the battery you want either from the Minit battery settings app or by looking through the enclosed thumbs folder. (Do not try to download and apply any battery from 3Minit Settings app while you have 3Minit battery installed and running on your phone. You will fc). Unzip the author's folder into the 3MinitBatteryIcons folder. It should be like this:
3MinitBatteryIcons folder
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pas2001 folder
Run the Tulsadiver3MinitBatteries.bat
In the ADB menu:
1. Select the author.
2. Next window type in the battery number and hit enter
3. Enter 500 to go back to first menu
4. Select complete installation.
That will put a magisk flashable zip named myminitbattery.zip in a folder called ozop on your sdcard.
5. Flash that zip in Magisk.
Example-pas2001 #125
pas2001 is a very talented themer, bootanimation developer, and a nice person that helped me out years ago.
ADB zip Pixel 2 XL Android 10 Sept update minus batteries
https://www.androidfilehost.com/?fid=1899786940962580616
Batteries by author
Offline
https://mega.nz/#!NNpgVYgJ!z8r30kQTkHBhrKlgnscqpjcyLE0m6kxzDz64noRybac
Colourable
https://mega.nz/#!RcpACAJR!yAt09OThxrFGsucAUBcgCjW5tMSSlxYLeBuqY4DA83g
daxgirl
https://mega.nz/#!wcwmwKzI!La1Bgs9PgnqmHrhrbvqE1jWz1RXgLSFKj_CTHaF6XOY
nadmaj
https://mega.nz/#!FYxkQYga!HyCYdctJOj63ljAOROFw86NzYlTwbvvlVLxbo5oNWMc
pas2001
https://mega.nz/#!hYxCBQTS!_sykGelkVpH_tWp8xhtvLch7XcEOOxbtUVUwOW13BHM
users
https://mega.nz/#!9YgUiYba!9s6bgrgHjxXURNLkNhaGIHkSxDf_TVjg_W3A39QzSKs
wii360
https://mega.nz/#!kYgyQSpa!WloQX6nRqguucHTq8Eo8kfu9-3xibcxsA9G3mxU8WE8
XKROME
https://mega.nz/#!pFwwzILI!e6wCPZt-tdBaaGr2FRl3y_epMbQlkJjd1oSO8v90kUs

Related

[THEME] PuRe

Most know this theme either from the Alpha release that we put out last month or from following on twitter about its progress. We have decided to finally release our initial build to the public and just improve and add from there. I guess we decided it was time to actually release something rather then just showing screens and putting out a build that was no where near complete. So here we are and this is the initial release of PuRe. I hope everyone enjoys it and offers feedback. We already have some new apps we are working on themeing and some improvements we plan on making to the theme overall.
The premise behind this theme is to create a white simplistic theme with slight color hints throughout. I can’t leave out that perhaps some things might have a slight edge to them. Also, we are trying to completely create a custom framework experience, along with doing the same to each apk
The majority of the image work is done by @gbianchi .. while I provided the majority of the xml edits.
Thanks to :
JRummy, Haxzamatic, David1171, djdarknight96, BS Themes, Jaithemes ..
these individuals either directly or indirectly influenced the progress of this theme
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Apks Themed
AccountsAndSyncSettings
ApplicationsProvider
Calculator
Camera
Contacts
DeskClock
Framework
GenieWidget
GoogleQuickSearchBox
LockscreenSettings
PackageInstaller
Phone
Settings
Superuser
Vending
Youtube
Install Instructions
make sure you have root and clockworks recovery installed
-boot into recovery via clockworks bootstrap
-select "install zip from sdcard"
-select "choose zip from sdcard"
-find and select PuRe.zip
-reboot
Download For Liberty 2.0.1
[Theme]PuRe-IR
Goodies
-Uninstall previous version and install as normal apk
Facebook
Motorola Music Player (Connected)
Wallpapers
JsinLegacy Picasa Wallpapers
Follow Us On Twitter
@Gbianchi
@JsinLegacy
Donate
Buy Us A Soda
Facebbook, Moto Music Player
will this be ported to other roms..like fission?

[TOOL][8-26-12] Aroma App Package Creator v1.0

This thread will no longer be updated. Instead use the thread here:
http://forum.xda-developers.com/showthread.php?t=1859221
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What Is It?
Aroma App Package Creator is an application for those who flash new rom's often and want an easy way to create a flashable zip to reinstall apps. This utilizes Aroma Installer for more customization, allowing you to choose which apps to be installed instead of installing all of them. I made this tool for myself after seeing strawmetal's Flashaholic Essential Packs and wanted a way to produce the same results without editing multiple config files for each "pack" I make. I hope everyone else will find it useful as well ​
How To Use: Click Steps For Screenshot
1) Download the aroma-app-package-creator.jnlp file and run by double clicking it
You must have Java 6 or higher for the application
You will have to accept a security warning. This is normal for all applications using Java Web Start
2) Click the + button under the Group Names list to create a new group
3) Add an app to a group by selecting the desired group, then click the + under the Apps list
If you don't select an apk file then there will be an empty folder in data folder of your created zip with the Apk's name where you should place the .apk manually
4) Choose your device from the Calibration drop down menu and then click create to build your zip
If your device isn't on the list of preloaded calibrations then choose CUSTOM and input the calibration data for your device. See below on how to get this data.
Send your device name and calibration data via email or pm and it will be added to the list of preloaded calibrations
5) Flash your zip like any other in recovery​
How To Get Calibration For Your Device
1) Download the calibration.zip from here
2) Run the zip in recovery like any other and when prompted to use alternative touch select no (usually using power button)
Nothing on your device is changed by running this tool.
3) Follow on screen instructions until your calibration data is displayed in a popup
When asked to tap the circle sometimes you may need to tap and hold for a few seconds or tap it multiple times. It should work eventually
You will get to test the calibration, if it is not good (not picking up finger, choppy, etc.) try running the tool again, but instead selecting yes for alternative touch
Downloads
aroma-app-package-creator.jnlp
calibration.zip​
Thanks To:
amarullz - For creating Aroma Installer
strawmetal - For the Flashaholic Essential Packs
This thread will no longer be updated. Instead use the thread here:
http://forum.xda-developers.com/showthread.php?t=1859221
This is going to make my life so much easier! Thank you for bringing this to the Amaze
This is a great addition for us. Thank you
sent from my NRGized Amaze,
powered by faux kernel v.17

[APP] Stock Android ICS Live Wallpapers

Have you been running a custom rom and seem to be missing the old live wallpapers? If yes then I have the solution to your problems! I have extracted the unmodified APKs from the stock rom and uploaded them to my Drive. It should work on any Android version equal or above ICS.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download: https://mega.co.nz/#F!A80niYiR!B6RGN_RymOD-_QPn6VZe4Q
Installation Instructions:
1) Click the link above
2) Download the selected file/s
3) Install as a system app or user app
4) Select live wallpaper
5) Hit the hay
I will also be taking requests for different custom roms. I will upload tomorrow wallpapers from Android 4.0.4 from our device. Though all may not be included, you can ensure that the files are safe and not malware.
EDIT: Wrong forum. Mods, can you please move the topic to Galaxy Tab 10.1 Themes and Apps
How do I install this app as a system app?
Method 1
1) Download and install a file manager that can ask for root access
2) Rename the file according to the selection below
a) Holo Spiral = com.android.wallpaper.holospiral-1.apk
b) Aurora2 = com.hu1.wallpaper.aurora2WXGATAB-1.apk
c) Blue Sea = com.hu1.wallpaper.bluesea-1.apk
3) Copy/move the following files to /system/app
4) Set permission to r-w-rr
Method 2
1) Make sure you have the app/s installed
2) Install Titanium Backup and Titanium Backup Pro
3) Select the selected app and long press (maybe?) and select convert to system app
I've really missed that blue bubbles wallpaper. I like the old look better than the new one that's on my sister's note 2. The I9000 froyo stock apk doesn't work very well. Thank you for posting.
Forgot that I've posted this thread and also forgot to ask the mods to move it. Anyways, I'll be adding some Android KitKat wallpapers from several ROMs in and out of our device.

[TWRP Themes] TWRP themes Updated [TWRP v2.7+ v2.8.0.1]

I spent some time puting together a couple of themed TWRP Recovery zips. I am TWRP's biggest fan but I've always hated the stock look.
On pretty much every device I've owned I've put together some TWRP themes and made them available for those that like them.
To start with I've kept these simple..... NeatRom blue and red based but I'm happy to redo with other Rom logo/graphics.
Updated, tested and working on TWRP v2.7+ versions.
***Update**** Added NeatRed v2........ compiled for TWRP V2.8.0.1
Code taken directly from TWRP to avoid bugs.)
I have used another themers zip as inspiration and a working base for these themes so credit goes to Sneakyghost at the HTC One M8 threads. Original thread here...http://forum.xda-developers.com/showthread.php?t=2734308
(thanks again for permissions to use)
Usual try at your own risk stuff applies but I've been running these for a few days with no issues. I hasten to ad......I am not a dev but a keen user.
Let me know what you think........ happy to do requests as and when real life allows it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To install, rename zip file ui.zip.
In your internal storage you should have a file named TWRP.
If its not already inside, create another folder called theme (note this has to be lower case)
Copy/paste the ui.zip file into the TWRP/theme/ folder.
No need to worry about permissions..... Reboot to recovery and enjoy.
Reserved for updates
.........and another......
nice work mate. thank you
This is a great improvement over stock theme, nice work and thanks.
SM-G900W8
Awesome work @Prof Peach, love the blue
this is sooooooooo Cooool
:victory: thanks
Updated NeatRed-ui v2. (download attachment from OP)
TWRP v2.8.0.1 version. (This will not work with older TWRP versions)
Base code from TWRP to avoid bugs.
Slight change to clock and version layout but otherwise the same look as previous version..
Added MTP control Button
Added Cursor control.
For a full list of updates see DeesTroys thread.

[Bootanimation] Google Pixel Bootanimation Resized for HP Touchpad

HP TOUCHPAD
Google Pixel Bootanimation
ABOUT
I optimized the Google Pixel bootanimation for the HP Touchpad by adjusting the canvas size of each image, deleting half the image files to improve the FPS, and re-zipping with Compression Level set to "Store." The result is a smooth animation that fits the height and width of the tablet's screen. If you have any suggestions, let me know. Enjoy!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOADS
Download (White) https://drive.google.com/file/d/0B_Z7ptWz2zMjeWlUaEt0WmJVTWc/view?usp=sharing
Download (Black) If anyone has a good way of converting the white version to black, please let me know or feel free to do it yourself. I have tried inverting the colors followed by adjusting the hue, but given the saturation of Google's green color, it always ends up too bright in the black version. The colors also have a worn look to them after doing this as a batch operation in Gimp.
HOW TO INSTALL
You need root access. A lot of the ROMs have this capability either already enabled or available in their toolbox in settings. If you are using the recent Android Nougat 7.1.2 Evervolv ROM, then you will need to download the SuperSU 2.46 zip file and flash that from your TWRP recovery (go to "Install" and select the zip file once it's on your Touchpad). From here, you can reboot and allow SuperSU to enable root access as a super user.
1. Change your USB connection to MTP (Media Transfer Protocol). You should be able to do this from the notification when your USB cable is plugged in. Otherwise, you can tap "About>Build Number" 7 times to unlock the Developer Options and you can find this option there.
2. Now, your HP Touchpad is recognized by your PC, so copy the bootanimation.zip onto your device somewhere in the Internal Storage.
3. With your favorite file explorer (I am using Solid Explorer which offers a free trial), cut/copy bootanimation.zip into the "root>system>media" directory and paste it there (overwriting the current bootanimation).
4. Done!
CREDITS
ZawZaw for the bootanimation intended for phones.
https://forum.xda-developers.com/cr.../bootanimation-official-google-pixel-t3480843
Google for the original bootanimation and images.
Great work! Thanks for contributing to our fine community:highfive:

Categories

Resources