Hi guys,
if anyone interested I did some tweaks to stock kernel which if anyone interested i will share screenshots.
Note that u have to be rooted and should have some kernel app like FK kernel manager app.
Below r some changes u can do based on ss.
goto Kernel settings - misc. Here by default thermal is "NOT SET". So, change it to dynamic if u r not sure what to change. Gamers can set to pubg as well.
I believe this is the reason ppl getting device heating.
If u feel like apps r getting killed, then u can reduce the GC aggression as below -
goto kernel settings - memory and choose as below.
couple of more tweaks i tried for much better idle stats. see below my idle . I will share it in next post
see idle n active stats
Please share more tweaks for better idle! Thanks @mady51
below is for prime cluster.
in kernel app goto governor options of prime cluster and do the below change.
go to caf cpu boost and set the boost interval to 40ms. by default its 120ms.
Nice to you from OnePlus 3 days
desiresiscool said:
Nice to you from OnePlus 3 days
Click to expand...
Click to collapse
built stock kernel but wifi isn't working, so didnt released.
Good Kernel needs time - thx for the tweaks ?
Battery Backup on xiaomi.eu 10.3.17.0 stable, with your Kernel tweaks. Could get easily ~10h SoT on average usage. With a lot of Video recording and taking pictures.
Great
Can somebody maybe tell me how to make the kernel tweaks persist in FK Kernel app after a reboot?
The settings seem to work pretty great so far! Just having to reenter after a restart is a bit annoying.
userguy said:
Can somebody maybe tell me how to make the kernel tweaks persist in FK Kernel app after a reboot?
The settings seem to work pretty great so far! Just having to reenter after a restart is a bit annoying.
Click to expand...
Click to collapse
you have the option to apply on reboot in the FK kernel app itself. just enable it.
mady51 said:
you have the option to apply on reboot in the FK kernel app itself. just enable it.
Click to expand...
Click to collapse
Thanks. But this option is only there for rhe "low memory killer presets". The other tweaks like on primary cluster for the better idle stats can not be saved?
userguy said:
Thanks. But this option is only there for rhe "low memory killer presets". The other tweaks like on primary cluster for the better idle stats can not be saved?
Click to expand...
Click to collapse
if u look at my ss, u can see a toggle button seen for every setting. u can enable that toggle
will these settings be good for k20 pro rom xiaomi.eu 20.2.20 dev weekly.?
Wysłane z mojego Mi 9T Pro przy użyciu Tapatalka
can you send your settings? I'm looking for settings that would have between performance and battery.
Wysłane z mojego Mi 9T Pro przy użyciu Tapatalka
Hi bro, @mady51
Thanks for share this...but im on miroom stock kernel..
Have a enable toggle for changes works?
Thanks in advance
Like this?
Regards
ivoxda said:
Hi bro, @mady51
Thanks for share this...but im on miroom stock kernel..
Have a enable toggle for changes works?
Thanks in advance
Like this?
Regards
Click to expand...
Click to collapse
Yes
Related
Polish Blood Project
Android Open Source Project
for LG P760
by mikegapinski
Clean stock Android, the google way. That is AOSP. Performance and stability, no rubbish.
What I improved over cm_10.1 and AOSP itself:
System:
Fixed GPS bugs from CM, updated vendor blobs
Performance settings backported from CM with custom option to change GPU clock on the fly; #note1
Added a powerhal to do the CPU frequency autoscaling. Now it should work the right way;
Replaced AOSP keyboard with Sony’s one. It simply works better and has multiple dictionaries.
#note1 You need to change gpu clock every time you boot, not a bug - need to implement feature to save the clock.
TODO:
Add CPU and GPU voltage scaling to performance tab in settings
Kernel:
Overclocking to 1200 MHz;
Option to overclock GPU in userspace;
Backport entire wifi driver from P940 to fix power managment;
Updated interactive cpu governor code from google kernel (branch android-3.4);
Remove all not needed cpu governors, only interactive does the scaling job well.
TODO:
Add option to scale CPU and GPU voltages on the fly in userspace;
Merge more upstream patches;
Add more steps for CPU(also needs to be reworked in system power hal);
Write a little piece of code for GPU autoscaling, should result in better power management
Focus on testing the CPU and WIFI power managment, this are main things I focus on - after getting it to work like it should I will add more features to kernel. I need a great base to start making new things.
Changelog:
Build 1:
First build
Code on https://github.com/mikegapinski and https://github.com/PolishBloodProject
Downloads:
ROM: http://d-h.st/Cp5
ROOT: http://download.chainfire.eu/345/SuperSU/UPDATE-SuperSU-v1.51.zip
GAPPS: http://goo.im/gapps
#Reserved
Awesome !!
Thanks for your work ! :good:
Very good.
Sent from my LG-P760 using Tapatalk 4 Beta
Excuse me, I do not really understand what it is that AOSP? This is what the Nexus phones use?
SentryMescudi said:
Excuse me, I do not really understand what it is that AOSP? This is what the Nexus phones use?
Click to expand...
Click to collapse
Yes, clean Android from google, hardest to port
mikegapinski said:
Yes, clean Android from google, hardest to port
Click to expand...
Click to collapse
Thank you very much for your work Mike, your return is really appreciated
Could you provide your kernel separately so that I can test it on other roms?
PreemPalver said:
Thank you very much for your work Mike, your return is really appreciated
Could you provide your kernel separately so that I can test it on other roms?
Click to expand...
Click to collapse
Without my system kernel won't play it's role with PM
mikegapinski said:
Without my system kernel won't play it's role with PM
Click to expand...
Click to collapse
I see, then can you make a kernel compatible with other aosp or cm based roms?
I mean, I understand that this kernel would be compatible but can you make a kernel which fixes battery drain?
Just to confirm that this has no relation with cm 10.1 right ??because CM still has lot of problem
thanks in advance :good:
So there is no high battery drain like CM ?
Any chance for mirror? Cause now second time I couldn't download it (suddenly stops around 100 MB).
@mikegapinski:
Michał, could you tell me how you make GPS to work on AOSP? I'm getting RIL errors on e.g. AOSPA+, but I know only that it could be RIL problem (from other device maintainers).
SentryMescudi said:
So there is no high battery drain like CM ?
Click to expand...
Click to collapse
Maybe but I didn't see any deepsleep state on this rom so battery is eaten quite fast. Still some optimalisation is needed, but this rom is a good start :thumbup:
Wysyłane z mojego LG-P760 za pomocą Tapatalk 2
sebx_g1 said:
Maybe but I didn't see any deepsleep state on this rom so battery is eaten quite fast. Still some optimalisation is needed, but this rom is a good start :thumbup:
Wysyłane z mojego LG-P760 za pomocą Tapatalk 2
Click to expand...
Click to collapse
You did something wrong.
PM is perfect - wasted a few long days on hal - I tested it multiple times.
mikegapinski said:
You did something wrong.
PM is perfect - wasted a few long days on hal - I tested it multiple times.
Click to expand...
Click to collapse
can you make a report about the battery?
I get 2 day easilly, up to 3 if mobile data is off. I have beed tesing thir for a month before published, all is fine
mikegapinski said:
You did something wrong.
PM is perfect - wasted a few long days on hal - I tested it multiple times.
Click to expand...
Click to collapse
Nothing wrong clean install, maybe more time is needed to enter deepsleep state on this rom much more than on others? I'll check it later.
Wysyłane z mojego LG-P760 za pomocą Tapatalk 2
sebx_g1 said:
Nothing wrong clean install, maybe more time is needed to enter deepsleep state on this rom much more than on others? I'll check it later.
Wysyłane z mojego LG-P760 za pomocą Tapatalk 2
Click to expand...
Click to collapse
Battery in linux kernel needs a few days to calibrate stats itself, but with DS I have no idea - I am simply using my phone not looking at cpu spy all day
Doesn't boot
This is my first thread, so please contact me if I have done something wrong
Main criterias that need work
-Sound loudness
-Ram management
-Performance
-Battery life
-Gaming
Better speaker volume
One of the biggest problem of cm11 based roms is the ow speaker volume. This can be Overcome by using VIPER4ANDROID
http://forum.xda-developers.com/showthread.php?t=2191223
It improves sound loudness by a great deal. TRY IT YOURSELF!!!!! Tick xloud down in settings and see the miracle happen:good::good:{Install app drivers properly and use methods as mentioned in app thread}
Performance
-Use interactive governor as it gives the best performance. Use performance in settings to do so or downloada 3rd party app from play store. For eg No-frills cpu control { Dont forget to apply set on boot.}
-DONT ENABLE AUTO BRIGHTNESS. It locks frequency at max.
-Dont use ART. It is just negligibly faster but can cause problems with certain apps
-If you are facing,strange problems that are other are not facing, flash stock ics ftf file in flashmode using flashtool and then flash the rom's kernel in fastboot mode and install the rom
Ram management
Try fly-on mod if it suits you [did suit me, I run whatsapp, VIER4ANDROID, HD widgets, Google Search, launcher, all without any of them redrawing
http://forum.xda-developers.com/showthread.php?t=2226373
Dont forget to take a nandroid backup
[According to me, its better than supercharger especially for our device as fly on mod is optimized for 512mb devices, I even got random reboots with supercharger, so use fly on mod]{yes, they do exactly the same thing}
-Download memory manager from play store and set the values as follows
8,10,20,24,26,28
Dont forget to tick apply on boot
-According to me, dont use any task killers and similar 3rd party apps
- I dont even use KSM or purging or assets[you may if you like to
-Greenify Ram hungry apps such as whatsapp and facebook
-Download any root explorer and then go to build.prop in system
Then search for ro.config.low_ram=false and change from false to true
though this will cause to transperant notificatin disappear, believe me, it will help a lot
Better Battery Life
-If you want battery life, use conservative or lionheart as cpu governor
-Follow certain simple techniques such as
1 Switch off wifi and mobile network when not in use
2 Use 2g network whenever possible over 3g
3 Switch off bluetooth or NFC when not in use
-Use BETTERBATTERYSTATS from play store to know whats using your battery
-use Wakelock Detector from play store to know which apps are waking up your device
-Geenifying apps saves battery life even
-Sometimes happens is due to frequent changes of roms, battery gets uncaliberated and shows wrong stats. Follow these steps
1 Charge your phone overnight
2 Use the whole battery the next day and then again charge battery from 0-100%
-Airplane mode- use airplane mode during night, it will save overnight battery drain
-Turn off auto sync and location, it will save both battery and RAM
-Use Juice Defender from play store{It isnt just a placebo, it really works}
-Refer to this guide for detailed info http://forum.xda-developers.com/showthread.php?t=1969741
Better gaming performance
-Reduce game graphics to improve performance
1 Download and install xposed module http://forum.xda-developers.com/showthread.php?t=1574401
2 Download and install app settings http://forum.xda-developers.com/showthread.php?t=2437377
3 In app settings, choose the game you wanna play.
4 Reduce the resolution to lowest
5 Reduce density from 240 to 150 and save the settings and reboot
By this you will get lower graphics but smooth gaming experience, especially on heavy 3d games
-Fly on mod will also help
-Use xbooster and set gaming mode
-Set ondemand as cpu governor and row as io scheduler
-Use airplane mode while playing offline games, it will stop internet services like location, syncing etc and clear ram as well as cpu performance
Using these tricks your gaming performance will increase significantly
By following these easy steps, we can make our Kit Kat roms fit for daily use
Again, if I did something wrong, please inform me
Please press thanks if I helped you and if you like my thread
Battery calibration is just a myth among other fake tweaks
Enviado desde mi ST25i mediante Tapatalk
Garcia98 said:
Battery calibration is just a myth among other fake tweaks
Enviado desde mi ST25i mediante Tapatalk
Click to expand...
Click to collapse
Yeah, but still I always calibrate my battery when I installed a new rom. IDK, I want to believe that it makes my battery life longer haha.
Warhoax said:
Yeah, but still I always calibrate my battery when I installed a new rom. IDK, I want to believe that it makes my battery life longer haha.
Click to expand...
Click to collapse
Well, actually placebo effect is very powerful LOL
Enviado desde mi ST25i mediante Tapatalk
Thanks bro, I was bored with the sound issue... but calibrate battery helps, because sometimes my phone gets crazy and power off with no charge, then I just turn it on and there's almost 50% of battery!
BrunoLopesBR said:
but calibrate battery helps, because sometimes my phone gets crazy and power off with no charge, then I just turn it on and there's almost 50% of battery!
Click to expand...
Click to collapse
It seems that you know more about Android than a Google engineer
PS: https://plus.google.com/app/basic/stream/z13dgb0rksywh3muq222fzkqnwfgdbgrk04
Enviado desde mi ST25i mediante Tapatalk
Garcia98 said:
It seems that you know more about Android than a Google engineer
PS: https://plus.google.com/app/basic/stream/z13dgb0rksywh3muq222fzkqnwfgdbgrk04
Enviado desde mi ST25i mediante Tapatalk
Click to expand...
Click to collapse
Oh, sorry... and thanks, I didn't know that
but do you know how to avoid the reboots that I mentioned? It's very boring...
BrunoLopesBR said:
Oh, sorry... and thanks, I didn't know that
but do you know how to avoid the reboots that I mentioned? It's very boring...
Click to expand...
Click to collapse
Welcome to the marvellous world of lithium batteries! xD
Enviado desde mi ST25i mediante Tapatalk
Nice thread
Thanks information is very useful :cyclops:
Some notes.
V4A is not compatible with walkman. (If you have it and its libs installed it won't work. )
Auto brightness doesn't lock my frequency at max. Probably ROM specific. (i use Weekly 4 cm 11 xperia p)
Flashing stock should not make a difference as entire /system partition is wiped on flashing.
Other than that all is good. (Wipe battery stats will have negligible effects and only when there ate major changes (like power hal) in ROM and you flash without wiping data. )
Sent from my Xperia P using Tapatalk
Thanks for the solutions! But I 've got some questions:
1. interactive governor - is it really the best one? If so, why it's not set as default?
2. You advise to not use ART...but what exactly it is (and where it is)?
Cheers!
pentoza said:
Thanks for the solutions! But I 've got some questions:
1. interactive governor - is it really the best one? If so, why it's not set as default?
2. You advise to not use ART...but what exactly it is (and where it is)?
Cheers!
Click to expand...
Click to collapse
According to me interactive and smartassv2 an interactive are the best ones. It is not default probably because of battery
About ART http://www.xda-developers.com/android/the-art-of-android/
It is present in developer options in settings
Press thanks if I helped you
Thanks
Hamza Murad said:
Some notes.
V4A is not compatible with walkman. (If you have it and its libs installed it won't work. )
Auto brightness doesn't lock my frequency at max. Probably ROM specific. (i use Weekly 4 cm 11 xperia p)
Flashing stock should not make a difference as entire /system partition is wiped on flashing.
Other than that all is good. (Wipe battery stats will have negligible effects and only when there ate major changes (like power hal) in ROM and you flash without wiping data. )
Sent from my Xperia P using Tapatalk
Click to expand...
Click to collapse
I got v4a work with walkman. Either you delete dspmanager, or using compatible mode in v4a
Sent from my Xperia Go using xda app-developers app
Honestly I don't see nearly any difference in speaker loudness using Viper4Android. Of course, sound quality and volume are much better on headset. But it doesn't change too much with speaker problem.
/CM11 on SOLA/
pentoza said:
Honestly I don't see nearly any difference in speaker loudness using Viper4Android. Of course, sound quality and volume are much better on headset. But i doesn't change to much with speaker problem.
/CM11 on SOLA/
Click to expand...
Click to collapse
Have you intalled the drivers properly??????
you have to install busybox from playstore, it is a very imp step. And also click xloud from down in the settings and set the effect to maximum
chetan_p said:
Have you intalled the drivers properly??????
you have to install busybox from playstore, it is a very imp step. And also click xloud from down in the settings and set the effect to maximum
Click to expand...
Click to collapse
Thank you for the answer.
If xloud is the last option in menu, yes I ticked it (sorry but in my native language that option was traslated and isn't even little similar to xloud now)
Of course I have installed drivers properly because as I said before there is huge difference on headset quality. But the difference on speaker is barely 'noticeable'...
I did not find any xloud option. Is it extra loud ?
CM11 20140310
Dhiraj said:
I did not find any xloud option. Is it extra loud ?
CM11 20140310
Click to expand...
Click to collapse
Sorry, i meant extra loud only. And set the value to extreme, dont forget to install busybox from play store its very imp
You can even see if android is not redrawing[closing] it frequently
Press thanks if I helped you
Thanks
chetan_p said:
Sorry, i meant extra loud only. And set the value to extreme, dont forget to install busybox from play store its very imp
You can even see if android is not redrawing[closing] it frequently
Press thanks if I helped you
Thanks
Click to expand...
Click to collapse
When I run flashtool (CM11) I can see something like this:
BusyBox v1.21.1-kk bionic (2013-11-24 11:52 +0100) multi-call binary
Isn't it enough? What is the reason to install busybox from Google Play Store?
@pentoza
Not every one connects their cm 11 phone to flashtool. No point. And for updating busybox its better to use play store
@chetan_p
Well I tried all of that. Never worked. Gave up eventually. On stock .100 (xp) the driver never installed.
Sent from my Xperia P using Tapatalk
Maya.Kernel.N4
I used most of the kernel options and finally decide to create for me which is exactly fit my needs.
Features,
- Android-eabi gcc 4.6
- init.d support
- Stock MPDecision binary
- Latest 3.4.y patches
- Synced with latest PM patches from CAF
- Latest Ondemand governor
- DT2W
- 50mV undervolted for all bins
- Cpu-boost from CAF to make smoother GUI
- Lower Brightness for saving battery
- A lot of performance tweaks / patches from CAF
Installation
fastboot flash boot boot<ver>.img
power off / on the device (to take effect updated cpu freq table)
Source
https://github.com/hihancioglu/kernel_msm
Downloads
http://forum.xda-developers.com/devdb/project/?id=3920#downloads
Thanks,
XDA:DevDB Information
Maya.Kernel.N4, Kernel for the Google Nexus 4
Contributors
ihancioglu, ihancioglu
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 0.6.7
Stable Release Date: 2014-05-12
Created 2014-04-30
Last Updated 2014-06-06
Reserved for future use
Hi,
made for CAF or AOSP based ROMs?
It made for AOSP , especially for Stock rom.
Sent from my Nexus 4 using XDA Premium 4 mobile app
Try sticking to zip format...Most users find it easy and handy :good:
There is no difference between both format for me. If I create a zip version I will include my image file. So you can use flashify or bootloader. It is easier than recovery
Sent from my Nexus 4 using XDA Premium 4 mobile app
Looks promising, keep up your work, always good to see a new kernel here So no colour control atm?
I just focus the performance tweaks to make this kernel smoother. Also I am very pleased with stock colors. I am not a fan of contrasty looks. This very natural for me. Maybe I can add one of the color control patches in the future.
Sent from my Nexus 4 using XDA Premium 4 mobile app
I'd love to see gamma control as well... Fauxsound patch or sound gain from moob or Mirage kernels would be awesome too, kernel feels good, nice job
Sent from my Nexus 4 using Tapatalk
ihancioglu said:
I just focus the performance tweaks to make this kernel smoother. Also I am very pleased with stock colors. I am not a fan of contrasty looks. This very natural for me. Maybe I can add one of the color control patches in the future.
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah good point, please keep it clean and simple, there are enough overloaded kernels out there
It is no big deal to fork your repo and add my favorite calibration to build on my own, again thanks the kernel runs great!
ihancioglu said:
Maya.Kernel.N4
Features,
- Lower Brightness for saving battery
Click to expand...
Click to collapse
It's just what I need! Thank you brother.
I installed it yesterday and will rapport my experience.
Quick question, is it possible to make lower brightness?
Verstuurd vanaf mijn Nexus 4 met Tapatalk
Ümit said:
Quick question, is it possible to make lower brightness?
Click to expand...
Click to collapse
Do you mean that make automatic brightness settings to lower thresholds? or wanted to make lower brightness with manual setting?
Because If you set lowest brightness setting manually , you will see that screen darker than automatic setting.
Thanks,
ihancioglu said:
Do you mean that make automatic brightness settings to lower thresholds? or wanted to make lower brightness with manual setting?
Because If you set lowest brightness setting manually , you will see that screen darker than automatic setting.
Thanks,
Click to expand...
Click to collapse
your kernel is darker than normal. It's good for me. But can min brightness be more darker (on auto settings)?
(Yani en düsük ayar daha da düsük/az isikli olabilir mi?)
Ümit said:
your kernel is darker than normal. It's good for me. But can min brightness be more darker (on auto settings)?
(Yani en düsük ayar daha da düsük/az isikli olabilir mi?)
Click to expand...
Click to collapse
A new version is in my tests. That will lower brightness at all auto settings.
ihancioglu said:
- Stock MPDecision binary
Click to expand...
Click to collapse
Finally! Thank you for your kernel.:good::highfive:
A new version is a bit postponed as UKSM is getting a phone bit laggy and battery is drains much than normal usage. Also I could not find any improvement on performance or memory operations. So I have decided to remove UKSM. I am testing a new image , performance is better now. I will upload as soon as I decide it is stable enough.
Thanks,
ihancioglu said:
A new version is a bit postponed as UKSM is getting a phone bit laggy and battery is drains much than normal usage. Also I could not find any improvement on performance or memory operations. So I have decided to remove UKSM. I am testing a new image , performance is better now. I will upload as soon as I decide it is stable enough.
Thanks,
Click to expand...
Click to collapse
Looks tempting with all the CAF tweaks. will give it a shot. thanks for sharing your work.
will_chrome said:
Looks tempting with all the CAF tweaks. will give it a shot. thanks for sharing your work.
Click to expand...
Click to collapse
Yes, also there are a lot of Linux mainline fixes / performance tweaks.
Hopefully you will enjoy my build.
(a New version is looks stable for me, but I will test it at least end of the day. I will share it tomorrow.)
Thanks,
Hi,
I just realized that 3g/2g data connection stopped working after a while. Reboot solves this issue. Do you have anybody experienced this issue? Maybe my rom caused this issue but I want to sure.
Thanks,
ihancioglu said:
Hi,
I just realized that 3g/2g data connection stopped working after a while. Reboot solves this issue. Do you have anybody experienced this issue? Maybe my rom caused this issue but I want to sure.
Thanks,
Click to expand...
Click to collapse
I do not use 3g/2g, I use alwas wifi. Do you have stock drivers?
Official Build: http://www.flyme.cn/firmwarelist-20.html
Note:
Based on 5.0.2
Installation takes long time.
For me (in CWM Recovery), ROM flashing took about 9 minutes and than the 1st boot took 8 minutes so be patient.
Do no flash GApps without 1st boot, it will give FC if you do so.
For root you have to flash SuperSU zip on your own.
Includes Normal (or named as powersave) and Performance mode sticking max frequency at 1.9 GHz and 2.3 GHz respectively.
Doesn't change Wi-Fi MAC address like other custom ROMs, if that matters.
Doesn't have dedicated WCDMA only mode, and resets automatically to preferred if you set in testing after reboot as in general ROMs
How battery life , performance?
any bugs?
please give us review.
patelumangv said:
How battery life , performance?
any bugs?
please give us review.
Click to expand...
Click to collapse
Well battery life seems fine. I can't comment on battery life of any ROM, I can't notice difference in battery life matter at all.
Performance seems OK, not very snappy but is good.
But I believe I will flash some other ROM now as only this ROM is one which is giving problem with playing Vainglory. Touching the screen scrolls down notification little bit most times in the app (not anywhere else but the specific game I olay)
ROM is fine not very highly intuitive or something just normal. Has inbuilt different immersed bar. And iOS like smart touch little white button.
Has themes available too.
Bugs idk didn't come across except I mentioned already.
ROM is usable for daily use, test yourself.
And do get rid of stock keyboard, it doesn't write letters despite getting tapped
patelumangv said:
How battery life , performance?
any bugs?
please give us review.
Click to expand...
Click to collapse
Battery life just sucks it drains damn fast then cm12 roms.
proximity sensor bug during incoming call.
Heating issue present on heavy usage.
the rom is still in beta stage
Anyone knows how disable hardware buttons backlight? I have Mi4.
ROM is very good do far in my opinion. Good performance, very nice camera (better than cm).
Wysłane z mojego MI 4W przy użyciu Tapatalka
Best battery life on this rom! MI4 LTE
Sent from my MI 4LTE using Tapatalk
This is for mi4 only..
Or can flash on mi3
dododol said:
This is for mi4 only..
Or can flash on mi3
Click to expand...
Click to collapse
It can be flash into mi3w
any idea how to synchronise contact from google account?
Install google installer for installing google apps
Sent from my MI 3W using Tapatalk
anyone have option control manual mode camera? I tried at my Mi3 when at manual mode only can change exposure + and - mode. no option change ISO etc. Front camera very clear/good compare MIUI camera.
And how to activate option/back button. I tried only can using menu button at mi Mi3
Hi..got problem when answer incoming call...
cant hear caller voice...
Or should change..any setting..
I was on miui v7 global developer
i tried installing from cwm
but stuck on mi logo
anyone know how much to wait???
Hello guys after I tried a lot of ROMs combo kernels roms blabla if any1 want to try its free and trust me u will love it.
The best combo its here super smooth
https://androidfilehost.com/?fid=673368273298984356 RRD by movzx notice the 09-09-2017 build (Nougat)
https://drive.google.com/drive/u/0/folders/1RiBJVEj4Y2aBnGQFwa7fhpDMPJOYOrsb Shadow Kernel 4.7 choose settings for performance-hexa core and apply undervolt and disable f-sync/ choose permissive selinux (if u want any magisk module)
Apply those settings in darkness app for gaming
Turn off arch power
Change both thermals to 80 Celsius
And happy gaming!
Small update: if any1 want vulkan api (cuz some apps support that API ofc) use the guide to enable it vulkan api activator etc
Also I added some photos to check battery usage too it was 4 hour of gaming 1 hour lost as u can compare cuz from one restart I had to do cuz forgot to enable my sound mods on magisk xd
xmixmaster said:
Hello guys after I tried a lot of ROMs combo kernels roms blabla if any1 want to try its free and trust me u will love it.
The best combo its here super smooth
https://androidfilehost.com/?fid=673368273298984356 RRD by movzx notice the 09-09-2017 build (Nougat)
https://drive.google.com/drive/u/0/folders/1RiBJVEj4Y2aBnGQFwa7fhpDMPJOYOrsb Shadow Kernel 4.7 choose settings for performance-hexa core and apply undervolt and disable f-sync/ choose permissive selinux (if u want any magisk module)
Apply those settings in darkness app for gaming
Turn off arch power
Change both thermals to 80 Celsius
And happy gaming!
Click to expand...
Click to collapse
Thanks for the advice. I read somewhere that disabling f-sync causes instability and some issues. If I skip disabling f-sync and leave it as-is and apply all other settings, will it still be fine?
@habitbuilderwarrior yes you can leave it on but here no problems cuz never had a random reboot to loose data etc its up to u
I don't play games, but love performance for daily usage too. Have undervolting improved battery backup during gaming too?
habitbuilderwarrior said:
I don't play games, but love performance for daily usage too. Have undervolting improved battery backup during gaming too?
Click to expand...
Click to collapse
Yea its for daily too no worries just enable the arch power maybe it will help a little
Small update: if any1 want vulkan api (cuz some apps support that API ofc) use the guide to enable it vulkan api activator etc
Also I added some photos to check battery usage too it was 4 hour of gaming 1 hour lost as u can compare cuz from one restart I had to do cuz forgot to enable my sound mods on magisk xd
xmixmaster said:
Small update: if any1 want vulkan api (cuz some apps support that API ofc) use the guide to enable it vulkan api activator etc
Also I added some photos to check battery usage too it was 4 hour of gaming 1 hour lost as u can compare cuz from one restart I had to do cuz forgot to enable my sound mods on magisk xd
Click to expand...
Click to collapse
which oreo rom is the best battery backup one? and which build?
Well this is the same battery usage i get in NOS oreo stock.
Will it work good on 2gb variant ?
pritamdutt said:
Well this is the same battery usage i get in NOS oreo stock.
Click to expand...
Click to collapse
Average usage w.o games its 10-13% per hour depending how old its your battery meanwhile I play rules or survival max settings I get minimal heat and no lags at all and battery consumption its 16-17 per hour
vizal96 said:
Will it work good on 2gb variant ?
Click to expand...
Click to collapse
Propably yes but I think u need to activate adaptive memory killer
xmixmaster said:
Average usage w.o games its 10-13% per hour depending how old its your battery meanwhile I play rules or survival max settings I get minimal heat and no lags at all and battery consumption its 16-17 per hour
Propably yes but I think u need to activate adaptive memory killer
Click to expand...
Click to collapse
How to activate that?
vizal96 said:
How to activate that?
Click to expand...
Click to collapse
Soz for delay work priority.... Darkness app in apo drawer tap on memory and u will see it