Related
Hi,
I'm on the process of installing ClockWorkMod Recovery, stupid of me i forgot to enable USB Debugging option on my phone. Now I'm stuck on Command Prompt saying...
C:\Fastboot>fastboot flash boot recovery-nozomi.img
< waiting for device >
It has been sitting for more than 5 minutes as I am typing now. Should I disconnect the USB cord? Would this action brick my phone?
Sorry for my stupidity!
cybrkada said:
Hi,
I'm on the process of installing ClockWorkMod Recovery, stupid of me i forgot to enable USB Debugging option on my phone. Now I'm stuck on Command Prompt saying...
C:\Fastboot>fastboot flash boot recovery-nozomi.img
< waiting for device >
It has been sitting for more than 5 minutes as I am typing now. Should I disconnect the USB cord? Would this action brick my phone?
Sorry for my stupidity!
Click to expand...
Click to collapse
How are you installing it ???
Via flash tool??
And nope your phone won't brick
I disconnected the cord. Turned on the phone and noticed that USB Debugging is ticked/checked. So I repeated the process but I am still getting..
< waiting for device >
What should I do?
soulhackereborn said:
How are you installing it ???
Via flash tool??
And nope your phone won't brick
Click to expand...
Click to collapse
Yes, via Flastool. Yeah my phone did not get bricked! :good:
cybrkada said:
Yes, via Flastool. Yeah my phone did not get bricked! :good:
Click to expand...
Click to collapse
can u give the link for this recovery you triein to push through flashtool and the turorial if possible...
soulhackereborn said:
can u give the link for this recovery you triein to push through flashtool and the turorial if possible...
Click to expand...
Click to collapse
Hi soulhackereborn!
Sorry for the late reply! Sorry the forum prevented me from posting the URL as I am just a new user here.
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Anyway the tutorial says (copy&paste):
Use the computer for downloading the CWM file from here.
Then, on the same computer download fastboot from here.
Extract fastboot on C:\ drive.
Then, copy the downloaded “ecovery-nozomi.img” file to the Fastboot folder from your computer.
Now you must connect the phone in fastboot mode with the computer.
In order to do so you must plug the USB cord to the PC, then on your phone press and hold the Volume Up button and while doing this connect the USB cable to your Xperia S.
Up next, on the PC click on “Start -> Accessories -> on Command prompt right click -> Run as administrator”.
The command prompt window will now be displayed.
Now, enter the following commands (press enter after each one): “cd c:\Fastboot” and “fastboot flash boot recovery-nozomi.img”.
CWM will now be flashed.
In the end the “finished / OKAY” message should be displayed.
In command prompt enter “fastboot reboot”.
Your handset should now reboot into ClockworkMod recovery.
Remove the USB cord and disconnect the Xperia S from the computer.
cybrkada said:
Hi soulhackereborn!
Sorry for the late reply! Sorry the forum prevented me from posting the URL as I am just a new user here.
"To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!"
Anyway the tutorial says (copy&paste):
Use the computer for downloading the CWM file from here.
Then, on the same computer download fastboot from here.
Extract fastboot on C:\ drive.
Then, copy the downloaded “ecovery-nozomi.img” file to the Fastboot folder from your computer.
Now you must connect the phone in fastboot mode with the computer.
In order to do so you must plug the USB cord to the PC, then on your phone press and hold the Volume Up button and while doing this connect the USB cable to your Xperia S.
Up next, on the PC click on “Start -> Accessories -> on Command prompt right click -> Run as administrator”.
The command prompt window will now be displayed.
Now, enter the following commands (press enter after each one): “cd c:\Fastboot” and “fastboot flash boot recovery-nozomi.img”.
CWM will now be flashed.
In the end the “finished / OKAY” message should be displayed.
In command prompt enter “fastboot reboot”.
Your handset should now reboot into ClockworkMod recovery.
Remove the USB cord and disconnect the Xperia S from the computer.
Click to expand...
Click to collapse
everything seems to be good in the tutorial though..
But what is it a kernel, rom or an CWM image file ???
if still it says waiting for device then here's a couple things you should check :-
1) Fastboot ie; S1 Boot driver installed or no
2) Switch off phone and connect it to the PC via usb holding Volume + button (this is fastboot mode)
3) Check does your device remain in fastboot mode or no i mean purple led light glows stays on continuously or no until u execute the command, if not reinstall the driver and try again
4) If everything well till now try flashing with the given commands without the quotes ie; fastboot flash boot recovery-nozomi.img
soulhackereborn said:
everything seems to be good in the tutorial though..
But what is it a kernel, rom or an CWM image file ???
if still it says waiting for device then here's a couple things you should check :-
1) Fastboot ie; S1 Boot driver installed or no
2) Switch off phone and connect it to the PC via usb holding Volume + button (this is fastboot mode)
3) Check does your device remain in fastboot mode or no i mean purple led light glows stays on continuously or no until u execute the command, if not reinstall the driver and try again
4) If everything well till now try flashing with the given commands without the quotes ie; fastboot flash boot recovery-nozomi.img
Click to expand...
Click to collapse
1. I dont know how to check, it should be installed as i unlock the bootloader yesterday. I actually manually updated it on Device Manager.
2. I understand this.
3. On my case, it's a blue LED lit steadily after doing step 2. I am using Sony Xperia S.
4. Yes, i flashed them without the quotes.
cybrkada said:
1. I dont know how to check, it should be installed as i unlock the bootloader yesterday. I actually manually updated it on Device Manager.
2. I understand this.
3. On my case, it's a blue LED lit steadily after doing step 2. I am using Sony Xperia S.
4. Yes, i flashed them without the quotes.
Click to expand...
Click to collapse
Try rebooting both your PC and phone... This is a small thing but always helps and one more thing after switching off the phone n before connecting it in fastboot mode let der be a gap of alteat a min or two
Is this tutorial on xda or some other forum if on xda then try messaging me the link or tel me forum sub forum topic and title
Usually <waiting for device> can show up when you don't have proper drivers installed. Double check them if you haven't done so.
soulhackereborn said:
Try rebooting both your PC and phone... This is a small thing but always helps and one more thing after switching off the phone n before connecting it in fastboot mode let der be a gap of alteat a min or two
Is this tutorial on xda or some other forum if on xda then try messaging me the link or tel me forum sub forum topic and title
Click to expand...
Click to collapse
I dont see PM here, i think I am still restricted.
see if the link helps, i removed w w w
android.gs/install-clockworkmod-recovery-sony-xperia-s
i'm rebooting them after this.. thanks
LiveSquare said:
Usually <waiting for device> can show up when you don't have proper drivers installed. Double check them if you haven't done so.
Click to expand...
Click to collapse
Which drivers? I have already downloaded SDK and I believe the S1 driver is installed yesterday when i unlock the bootloader.
i rebooted both the PC and the CP, but i am still getting < waiting for device >...
by the way is the ADB from tutorial the SDK one?
cybrkada said:
i rebooted both the PC and the CP, but i am still getting < waiting for device >...
by the way is the ADB from tutorial the SDK one?
Click to expand...
Click to collapse
Dude as far as I know there is no need to check/ tick USB debugging for fastboot... It's just for flashtool..
Try re -installing the drivers again manually or let windows search over internet...
Finally, i made it! thanks to both of you!
fastboot.exe seems to be corrupted!
Problem solved!
Just last one question, now that i have CWM recovery on my phone, is it already rooted? sorry i am beginner...
cybrkada said:
Just last one question, now that i have CWM recovery on my phone, is it already rooted? sorry i am beginner...
Click to expand...
Click to collapse
Yes ur rooted!!
Thanks!
I'm currently downloading Cyanogenmod ver 9.1. Hopefully it works! Thank you so much buddy! You have been very helpful! If I get problems on flashing CM9.1, i'll contact you , hehe
One of the reminders on isntalling CM9 is:
Make sure that your Xperia S is already running a rooted firmware, and that it has the ClockworkMod Recovery properly installed.
How do I know I have a rooted firmware? Do I still need to flash FTF file?
By the way, I am getting a boot loop from CWM recovery, I cant go to the homescreen, no option to turn off! It only reboots the CWM.
(Still downloading CM9 as of the moment)
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
tawhid111 said:
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script to get into fastboot at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
Click to expand...
Click to collapse
So you solve it! :good:
:/
tawhid111 said:
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
Click to expand...
Click to collapse
Still unable to do it, when I plug the cable holding vol+ it just reboot normally :/
foreverman said:
Still unable to do it, when I plug the cable holding vol+ it just reboot normally :/
Click to expand...
Click to collapse
Then try enter in lelus fastboot mode, ad then flash x-loader, uloader, boot.img and recovery.img from stock rom for your device type model. Then repeat steps 1 and 2
Where can I find the lelus script?
Sent from my Note II
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
ciccillover said:
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
Click to expand...
Click to collapse
Then you need a Technician with a Octopus Box to repair your partition table...
ciccillover said:
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
Click to expand...
Click to collapse
Can you boot into recovery? We now have a custom recovery for locked bootloaders (and CM roms). If you can get into recovery, I would try some adb commands to mount the partitions.
No, no recovery. Just to make sure that I'm not doing it wrong, what is the key combination to boot to recovery?
I have also tried:
Code:
fastboot boot some_recovery_image.img
It says ok, but the phone just hangs at the black screen and becomes undetectable as a fastboot device, until I pull the battery. So, unless the some_recovery_image.img is unsuitable for my P760 (which may be!), there is something seriously wrong I think.
Or maybe I can try the same command with the custom recovery for bootloader locked phones... Where can I find it?
ciccillover said:
No, no recovery. Just to make sure that I'm not doing it wrong, what is the key combination to boot to recovery?
I have also tried:
Code:
fastboot boot some_recovery_image.img
It says ok, but the phone just hangs at the black screen and becomes undetectable as a fastboot device, until I pull the battery. So, unless the some_recovery_image.img is unsuitable for my P760 (which may be!), there is something seriously wrong I think.
Or maybe I can try the same command with the custom recovery for bootloader locked phones... Where can I find it?
Click to expand...
Click to collapse
Your EMMC partition is wiped or fried... you really need a JTAG service or a Box like octopus because your L9 is Hard-bricked...
Thanks for your opinion. Yet, I still want to hear from others.
I'm running into more and more problems with the L9 as their me grows.
-Fastboot doesn't work under Windows 8.1 and 10, but under the now obsolete(for me) Windows 7, unlike my other devices, which are fine with Win 10.
-ADB seems to work, but requiring the device to be still able to boot.
-I always boot to recovery from within Android as long as the L9 ain't bricked. After a failed rom install, during which the sd card failed(could no longer write or be formatted afterwards, the last time stamps of files and folders were set during the failed install) I discovered a problem with TWRP(Artas182x's and Edwin's), which may have been present since a long time: Trying to invoke TWRP via keypress will brick the device!
So, if my P760 no longer boots, there's only download mode available, sort of the final line of defense.
-There's sort of a trick if even download mode fails: After a failed attempt unplug phone, force switch-off, if the phone is in brick state. Then switch on, force switch-off again, and only then attempt download mode again. And have patience while holding down the vol button, it might take up to 20 seconds for the phone to switch itself on into download mode. (A single forced powerdown will cause Fastboot NOT to work the next time)
But I'm absolutely clueless about the recovery issue, for now TWRP is semi-working, can only be accessed via Android, as long as the phone is fully working.
W/o Fastboot, I now have flashed stock rom several times and rooted it with Kingo rooter just to be able to run Flashify to install TWRP. If Flashify is the culprit for the TWRP issues, I could need a recommendation for a better working app.
ciccillover said:
Thanks for your opinion. Yet, I still want to hear from others.
Click to expand...
Click to collapse
Tried OMAP flasher ? It needs memory configuration file in order to work with our device
No, I didn't. I have sold the phone for spares.
Inviato dal mio LG-D855 utilizzando Tapatalk
I never needed the OMAP drivers and tools. As they are ancient, they will probably make even more problems with newer Windows versions.
I could by no means invoke Fastboot on this device with Windows 8.1 and 10, Seven worked. So you had to go for Download Mode instead to recover to stock rom, then root with the Kingo tool, then install TWRP via Rashr or Flashify, the most time consuming way to recover from the frequent bricks.
And the LG Flash Tool 2014 always needed several attempts to get the job done. The latest official recovery tool from LG works in D/L Mode, but will always download the rom image anew.
Hello everyone ill cut right to the point i rooted my Zte source using Kingo root app about a month ago and everything was fine and 3 days ago i installed a boot animation through rom toolbox and my phone now will not boot up i get black screen with flashing red light when i try to go into recovery mode by pressing and holding power and vol + it vibrates but stays at black screen and shows up on my pc as ZTE Handset Diagnostic Interface(DFU) (COM5) what do i do? Can i reset my phone?
King-Reaper said:
Hello everyone ill cut right to the point i rooted my Zte source using Kingo root app about a month ago and everything was fine and 3 days ago i installed a boot animation through rom toolbox and my phone now will not boot up i get black screen with flashing red light when i try to go into recovery mode by pressing and holding power and vol + it vibrates but stays at black screen and shows up on my pc as ZTE Handset Diagnostic Interface(DFU) (COM5) what do i do? Can i reset my phone?
Click to expand...
Click to collapse
i say there is still hope. seems the only thing you messed up is the boot animation. according to this thread http://forum.xda-developers.com/showthread.php?t=2520309
you have fastboot for your device, so in theory, you could use a fastboot flash recovery command to install CWM, and use it to install a ROM
The French Tickl3r said:
i say there is still hope. seems the only thing you messed up is the boot animation. according to this thread http://forum.xda-developers.com/showthread.php?t=2520309
you have fastboot for your device, so in theory, you could use a fastboot flash recovery command to install CWM, and use it to install a ROM
Click to expand...
Click to collapse
how do i get fastboot to recognize my device? i have correct drivers for phone since my brother has same phone i got drivers off his phone but fastboot does not see my device adb does not see my device as well
King-Reaper said:
how do i get fastboot to recognize my device? i have correct drivers for phone since my brother has same phone i got drivers off his phone but fastboot does not see my device adb does not see my device as well
Click to expand...
Click to collapse
did you enable usb debugging?
The French Tickl3r said:
did you enable usb debugging?
Click to expand...
Click to collapse
the last time my phone would boot up yea usb debugging was enabled by now it wont boot so i cant check to make sure
i dont use the same device as urs but as far as my knowledge goes
ur phone has usb degubbing on ...jus gt in fastboot and figure out a way to install a custom recovery
then u can just wipe data and ull b good to go...no need of a new rom
search xda forum for ur cell to flash recovery via fastboot
:good:
MOHIT.S said:
i dont use the same device as urs but as far as my knowledge goes
ur phone has usb degubbing on ...jus gt in fastboot and figure out a way to install a custom recovery
then u can just wipe data and ull b good to go...no need of a new rom
search xda forum for ur cell to flash recovery via fastboot
:good:
Click to expand...
Click to collapse
but fastboot dose not see my device and i dont know how to make fastboot see my device
King-Reaper said:
but fastboot dose not see my device and i dont know how to make fastboot see my device
Click to expand...
Click to collapse
dude...1st of all fastboot is a boot mode...to get into it u have to use combination keys while booting, some times use usb cord
just google how to fastboot with the name of ur device ull gt it!
Hey guys sorry I've been busy my phone is fixed I just took it to cricket and told them a software update broke my phone so this thread can be closed thanks for everyone's help
Sent from my ZTE_N9511 using XDA Free mobile app
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
EFAYSAL said:
Hi...
I try to root my FL02 (ALCATEL FLASH PLUS 2) every thing goes perfect and i get ORANGE STATUS but at the last step when trying to flash the rom with TWRP it could not read the SD card and system folder isn't abel to wipe so i try to repeat steps again.
first flasing in the video done and mobile restarting. no logo on screen and it doesnt boot and cannt go in boot mode or fastboot mode.
it connect and disconnect with PC but i still can connect it to flashing programme and i can send flash from PC but it doesnt boot and nothing appear on the screen.
any help....
Phone : FLASH PLUS 2
N D1M N7KE 03 TJZ
ANDROID 6.0
I follow this video to root
youtube.com/watch?v=d8zPGPJ_uZY
Click to expand...
Click to collapse
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
SubwayChamp said:
Ok, tell me to can help you;
Do you have TWRP installed?
Do you unlock bootloader succesfully?
In which modes you can enter? fastboot, recovery, download (do detects SPFlash Tool?)
Click to expand...
Click to collapse
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
EFAYSAL said:
Thank you SubwayChamp for help.
No , TWRP is not installed now .
Yes, I think bootloader has been unlocked. It is done with Orange status.
I think it is in download mode. it detects SPFlash.
Click to expand...
Click to collapse
Ok, I guess that your device is actually in bootloop and don´t booting.
Tutorial that you followed has many steps and don´t need to do all this to just root device and it contains some files like lk.bin that you can´t be sure that should be for your device.
Some users use this file (lk.bin) of an unlocked device and think that flashng in other device then get unlock it but no need, your device can be unlock it just follow some commands in fastboot mode.
Now you can do the next;
Try to flash again your rom stock (I guess that you don´t have a backup), if for some reason your official tool doesn´t work then use only some images like boot, system and userdata with the scatter.txt to flash them through SP Flash Tool.
Here a link to TWRP https://youtu.be/6vj_BY6xJdA, you can root it with supersu v2.78 0r v2.82 and here some files that can be usefull too https://drive.google.com/uc?id=0BwJgeCYTpnEHNlg2VUlieHFTYVU&export=download
Update steps that you are following to can assist. What extension has your rom and if it is recogniced for SP Flash Tool. I didn´t ask you if you can enter to fastboot mode and if you can then you can know if your bootloader is unlocked typing fastboot oem info
Most info that you give and some screenie will help to understand better
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
EFAYSAL said:
Unfortunatly, it can not enter to fastboot or recovery mode. Those files in replay didn't work and i dont have a backup. I try to flash recovery.img, system.img and preloader_shine_plus.bin . All done but it still black screen and does not boot. But now it connect to Pc without disconect .
I cant add link or images to my post.
Click to expand...
Click to collapse
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
SubwayChamp said:
Gmail didn´t warn myself about your post. Did you solve it?
You said that flashed recovery, system and preloader but how, through SPFlashTool?, if yes, are you sure that this tool recogniced your device?
You forgot to flash boot.img too.
Other way to try; flash only preloader.bin and then try flashing boot, system and userdata that are the three most important partitions to can boot.
Like last resort you can do a Format all + flash but only like last.
Click to expand...
Click to collapse
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
EFAYSAL said:
first of all thank you for your help. I was busy last week .
Yes it was with SPFlash and it is show MT6775 when mobile connect . but if i try flashing boot it gives an erorr and cant flashing.
I think i have a wrong boot file.
I miss userdata file.
Do you know where can i download necessary files for this model?
I apologize for delaying. It is time for school examin
Click to expand...
Click to collapse
I´m not sure if you are connecting correctly your device at right time and form to can flash it properly. Every device has more or less a specific way to do it. My last alcatel it was connected just with device power off and after to tap on download, but in other device Blu Dash was connected pressing just vol_up and my last mt6757 Bluboo had to press both vol up and down at time to connect to pc and after to tap on download option. To have sure that is well done increase volume in your pc, you will hear a first sound that is cause pc is recognicing but then you have to hear a second sound that is when SPFlashTool is recognicing device and you will see a red line in down side of the tool window, release button inmediately and let tool to work.
This is a good rom for your device according the author is optimized https://droid1311.blogspot.com/2017/08/alcatel-fl02-aka-flash-plus-2-via.html and this is the link directly if you have troubles with pop-up-adds https://drive.google.com/file/d/0BwAGh1drb91SeDZwV1VXbXpjQWM/view
Also you can try with other versions of SP Flash Tool, most stable maybe should be v5,1628 https://androidmtk.com/smart-phone-flash-tool leth me know how you go
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
SPFlashTool 5.1628:
I try all the way with and without pressing any button but no luck . And when it work finishing with error.
SPFlashTool 5.1628:
I try all the way to get that mode but nothing works. So I try to click download button then conect the phone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
EFAYSAL said:
If I understant, the status bar has to be red then I will release the mobile button and click download in SPFlashTool.
I try all the way to get that mode but nothing works. So I try to click download button then conect the pkone by random buttons and every time i get red color , yellow , green ,purple , yellow (for many times 100%)
then i get this error:
ERR: STATUS-SEC-IMG-TYPE-MISMATCH (0xC002002A)
Click to expand...
Click to collapse
There is a part that is not variable in the way to use this tool, ever you have to tap on download before to connect device and is recommendable too connect cable usb to pc (not yet to device); from here is when the button that you have to press can vary but like I said you before in my last mt6757 (a very similar to yours) works pressing both vol at same time to connect terminal cable to device and now you will see a red line (could be violet-ish)
Try before just flashing only preloader file to recreate some partitions and then do other flash for the other files.
Of course you have to be sure that all drivers are installed correctly cause this tool needs to put your device in download mode (a special level) and also keep it in this state so find VCOM drivers for Alcatel and adb/fastboot installer and try to uninstalling some older drivers that you don´t use and many times we keep in our pcs and for a short data transmission can helo that all the rom move it in same folder where SPFlashTool is allocated.
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
EFAYSAL said:
After updating drivers and trying all the possibilities buttons the red line doesnt appear.
Click to expand...
Click to collapse
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
- In what android version are you, 6.0?
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
- Did you try to flash just preloader, only this file?
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
SubwayChamp said:
Ok, here there are somethings that we need to know
- First of all don´t forget to charge your battery, after many attempts could consume a lot.
- Your device is recogniced in fastboot mode? mtk has two variables ways to enter to, pressing both vol + pwr till an options menu appear, then you have to select, and the other method most known is vol down+ pwr to go diirectly
Click to expand...
Click to collapse
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
SubwayChamp said:
- In what android version are you, 6.0?
Click to expand...
Click to collapse
Yes, last time it was 6.0 before the root
SubwayChamp said:
- What is the exact variant of your device, you can know maybe seeing in the box, this rom is for 5095K version 6.0 MM
Click to expand...
Click to collapse
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
SubwayChamp said:
- Did you try to flash just preloader, only this file?
Click to expand...
Click to collapse
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
SubwayChamp said:
If SPFlashTool don´t give signals of recognicing device is probably that your device is not now totally power off, try pressing pwr by 7 seconds, then try to flash again combining both vol with pwr button
Upload some screenshot about the process
Click to expand...
Click to collapse
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
EFAYSAL said:
Which option mode should appear? Screen is always black (off) all that i have on the phone is the LED.
I try more than 4 different drivers for Alcatel Flash Plus 2 (vcom & cdc) but no sound from SPFlash to prove that it recognise the phone. Sounds just release and keep relrease from Windows 10.
Yes, last time it was 6.0 before the root
Unfortunatly, I dont know . There is nothing on the box or manuel.
that is what i found on the box :
FL02
Venus gold H-B
FL02-2HLCEU2
- PWR+VOL(+) : reset the phone
It is done. all that i have to do is to tab on Download and then connect the phone and I dont need to press any button.
I did that but it is same.
Note:
Success fash always done without pressing any button on the phone. and I try it with and without buttons sometimes it is fail when I press a button and otherwise it work.
I have formated whole fash.
Click to expand...
Click to collapse
You need to try two different ways to flash files and restore your device.
First method: fastboot mode
You need to get device enter to fastboot in order to flash some files like system, boot and userdata, then there are two main methods to do it:
- Pressing pwr + vol down
- And I mentioned that sometimes work pressing both volume button + pwr and a menu have to appear to can select an option to enter to (fastboot mode), in some devices this method is not working but you have to try several times attempting to.
Second method: SPFlashTool
You have to ever press first of all Download box and connect terminal cable to pc and the buttons thhat you need to press at time to connec cable usb to your device may vary, sometimes vol down, sometimes both vol but never pwr button; if pc recognice then you have to release all buttone an let it pc continue the flash process.
If SPFlashTool recognice device first flash only preloader file and select now lk.bin too. Flash only these two files and after do again a new flash with the rest of the files, Why you need to do this? your partitions are corrupted and you need to restore them with these files in order to can flash all another files.
Before all of this charge your battery, if you have a cover removable then extract it some minutes and put it again.
Also I read that for this model it´s used this tool instead of SPFlash Tool https://androidmtk.com/download-sugar-mtk-sp-flash-tool (inside the zip you will find a password to start the tool) but I´m not sure what kind of rom it needs, you have to connect your device to begin the process, you will find in product models section in the tool this variant for your device "FL02"
Try first the other tool and then this and let me know how you go, mtk devices are almost unbrickeable so it´s just to find the appropriate way to return it to the life.
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
EFAYSAL said:
Hi again!
It was along time,I know . But I tried to know why I can’t return my phone back to life.
I have searched all possible websites for rom of this model and I have formatted my pc and installed win7 with all necessary drivers.
I can’t found any rom for it but now I can flash all the necessary files for boot they flashing and running smoothly but the mobile can’t boot up.
I try to use that app in your replay. It recognizes the device but stuck after that and keep looking for rom without any chance to download it.
I think I have a wrong rom files. I can’t find any other reason but this.
I will write again all information about my phone:
It is called Alcatel Flash Plus 2
I bought it from AliExpress and it came from Indonesia as I remember (not sure)
On battery wrote:
FL02
TCL communication Ltd
FL02-2HLCEU2
Click to expand...
Click to collapse
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
I understand that you tried with Sugar tool with no lucky.
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Is there some custom development, recovery, roms for your device?
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
SubwayChamp said:
Yes, so many time
When device is booting, it stays in bootlogo or goes atleast to bootanimation?
Click to expand...
Click to collapse
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
SubwayChamp said:
I understand that you tried with Sugar tool with no lucky.
Click to expand...
Click to collapse
Yes. After recognizing it keeps trying to download data but no luck.
SubwayChamp said:
Did you try again through SP Flash tool? trying to flash in a first attempt only preloader file and in a second attempt the other files? (try with 2 or 3 versions and see the differences).
Click to expand...
Click to collapse
I know it is disappointing!. I try this but no luck.
SubwayChamp said:
Is there some custom development, recovery, roms for your device?
Click to expand...
Click to collapse
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
SubwayChamp said:
I think that now you are flashing correct rom through fastboot but like you did before bad/wrong flashings your bootloader is refusing to boot to system. Flash through fastboot all the partitions that you can follow the syntax for every one of them by i.e. typing fastboot flash cache cache.img and so on one by one (some of them are unflashable through this method)
Click to expand...
Click to collapse
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
EFAYSAL said:
Unfortunately, nothing happens. The screen is black no bootlogo appears or anything that shows that device is booting. It is looking like nothing has happened.
Yes. After recognizing it keeps trying to download data but no luck.
I know it is disappointing!. I try this but no luck.
Unfortunately no, all that I found are TWRP recovery Roms. I don’t know if I can use them with SPFLASH Tool.
I began lose hope that the mobile could work again. I live in Sweden and no technicians kan help me to fix this issue. I should do it by myself.
If you kan help me to do that step by step. Please write to me what I have to do from the beginning step by step until I reach the end. To be sure I'm doing it by the right way.
Thanks
Click to expand...
Click to collapse
I´ll tell you some ideas with no any specific order that you can try or see if works.
Really very strange that display stays in black, you told me that flashing files through fastboot is working but doesn´t appear not even bootlogo, connect to pc as it is and see how pc recognices in devices manager and my pc if appears like a determined drive d/e/f so it looks that some bad flashing burn your kernel and this case is similar to when a Samsung device need to use jtag method to revive, if in your country no-one knows about Alcatel devices this could be a similar case to what I´m saying then it could be a clue for a technician. I tell you this cause many time ago when I flashed by error a Samsung s4 and only this method revived my device.
Try this, flash your stock recovery only through SPFlash tool and flash after through Alcatel Download tool your stock rom cause some firmwares need to detect stock recovery first to can flash other partitions.
At this stage don´t you have stock recovery, no? so you can try to format data cause sometimes when bootloader is altered then avoid to boot and formatting data can solve this.
If this recovery twrp is for your device you can try flashing through SPFlash tool, you have to put recovery.img and scatter-txt in a same folder. then if succesfull format data, system, wipe cache and dalvik and maybe later try to port some custom rom would be a way to solve this.
To flash any partition through fastboot this is the syntax, just follow one by one any of the files that are in your rom folder so just follow these, if some of then can´t be flashed don´t worry then it´s not flashable:
fastboot flash boot bot.img
fastboot flash cache cache.img
fastboot flash lk lk.bin
and so on till the end
...But after try this if you didn´t get boot to recovery and obviously you can´t delete data nor system then delete first the next partitions trough fastboot typing:
fastboot erase system
fastboot erase cache
fastboot erase userdata
fastboot erase boot
Try all this and let us see how it goes
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
EFAYSAL said:
I have flashed TWRP Rom but it is same , no luck.
On sugar tool I got this message after success flashing via SPFLASH tool.
View attachment 4518365
I tried all possible buttons to connect device to PC on Fastboot mode but the PC cannot send data to my device.
To be in Fastboot mode , the device has to boot while pressing on (PWR & VOL+) but my device can’t boot.
Click to expand...
Click to collapse
I see that Sugar tool detects your device like rooted and refuses to flash anything, compare imei number which is in the box, I hope that it couldn´t be changed.
Don´t tell me simply no luck, what it says in SPFlash tool when you tried to flash TWRP and I guess that you put scatter-txt and twrp renamed recovery.img simply in the same folder. Just to be clear, to can flash with this tool your device it has to be off not needed fastboot for this. (provide some screenie)
Other combination of keys to enter to fastboot to flash some partitions when something is missing is, try these three ways:
- Pressing only vol down and at same time connecting to charger (connect first one terminal of cable to your device and then to the charger)
- Pressing the three buttons till a menu appears (you must to release inmediately all)
- Pressing vol up + pwr till a menu appears (you must to release pwr button inmediately) then choose fastboot
In the post 4 I provided a link from Google Drive, in this zip there are 8 items;
- From the item 2 use this version of SP Flash tool, put the four files in a folder and flash them
- In the item 3 you will find some scripts for fastboot, maybe they´re working better and also you have here a subfolder with twrp image.
- And if you get sucessfully install twrp in the item 7 there is a backup with some files to restore from this recovery.
Try one by one and update the info, I hope that your motherboard is not damaged.
After trying to install a custom ROM I'm now locked out from my phone and I can't shut it down any more. :crying:
It is in a bootloop between the two pages "Pocophone by Xiaomi - unlocked" and "Fastboot".
ADB doesn't recognize the phone and MI Flash the same problem.
Any help?
Go to fastboot and boot from recovery with this command.
fastboot boot xyz.img
Xyz is ur recovery file name.
Flash stock rom zip and wipe cache and reboot to system.
fastboot on PC is waiting for device, I can't get any connection between phone and pc
gartmann said:
fastboot on PC is waiting for device, I can't get any connection between phone and pc
Click to expand...
Click to collapse
Try reinstalling fastboot drivers
Installed SDK platform-tools (including fastboot drivers) on another pc.
adb devices >> doesn't list any attached device
If I connect another cell phone, it will be listed normally.
Let the device drain all the power,,then charge it again.
Any hint how to force this?
Didn't know, how strong the battery is . Second day to press the power button every 20 seconds to drain power to zero
gartmann said:
Any hint how to force this?
Didn't know, how strong the battery is . Second day to press the power button every 20 seconds to drain power to zero
Click to expand...
Click to collapse
Get it checked at service center. Or try changing the pc or mi flash tool version. These are the only way i know. As you are saying that ut is not responding to the fastboot. It maybe a hardware problem like the problem in type c port. So get it checked