LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
SCREENSHOTS
3rd PARTY ADDONS/MODS
While we have no issues with people using supersu/magisk/xposed/custom kernels/etc, we can't provide support for users who have them installed.
This thread is not the right place to discuss about mods/addons.
HOW TO INSTALL LINEAGEOS
- Make sure your phone was running OxygenOS 5.1.4 at least once
- Remove custom encryption pins/passwords else decryption will fail!
- Upgrade to latest available official firmware
- Upgrade to latest available TWRP
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Unlock bootloader and install TWRP.
- Boot into TWRP.
- Perform a backup of your current ROM. (Optional)
- RECOMMENDED: Do a factory reset! No support if you didn't!
- Flash LineageOS.
- Optional: Install the Google Apps addon package. (see Downloads)
- Reboot
HOW TO UPDATE LINEAGEOS
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Flash LineageOS.
- Reboot
HOW TO UPGRADE LINEAGEOS FROM LOWER VERSION
- Upgrade to latest available official firmware
- Upgrade to latest available TWRP
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Flash LineageOS.
- Update the Google Apps addon package if it was installed on your previous LineageOS version.
- Reboot
DOWNLOADS
LineageOS 17.0: Official | Unofficial
Firmware: https://sourceforge.net/projects/cheeseburgerdumplings/files/17.1/dumpling/firmware/
Migration-Tools: https://androidfilehost.com/?w=files&flid=254680 (Unofficial->Official, Official->Unofficial)
SU-Addon: Official | Unofficial
Google Apps: http://opengapps.org/ | BETA
TWRP: TWRP by codeworkx | Official
DEVELOPER RESOURCES
https://github.com/LineageOS/android_device_oneplus_dumpling
https://github.com/LineageOS/android_device_oneplus_msm8998-common
https://github.com/LineageOS/android_kernel_oneplus_msm8998
HOW TO CONTRIBUTE?
Send your patches up for review: https://review.lineageos.org/
TELEGRAM GROUP
https://t.me/joinchat/GQS-ghNaf-1YMpjSbh_puQ
Nice!!!
Any information on what's working or not?
Thanks a lot finally lineageOS 10 for dumpling
Great Stuff. ?
We are in safe hands yet again.
No, try it and report ?
Long live the 5T!
Tried installing just the ROM and Android 10 Beta gapps (stock and mini)., with and without Magisk as a fresh installation. it keeps kicking me back to TWRP....gonna try a fresh install of LOS16 to see if its just me
DarthVesh said:
Tried installing just the ROM and Android 10 Beta gapps (stock and mini)., with and without Magisk as a fresh installation. it keeps kicking me back to TWRP....gonna try a fresh install of LOS16 to see if its just me
Click to expand...
Click to collapse
flash codex's latest TWRP, ive heard people with same issue tried it and it worked for them.
lawwd_have_merci said:
flash codex's latest TWRP, ive heard people with same issue tried it and it worked for them.
Click to expand...
Click to collapse
cool thanks! that semi worked. 1st attempt w/ gapps and 2nd attempt w/o gapps allowed the rom to boot but within a couple of minutes into setup, steps the phone stopped working then the phone would auto-restart into recovery
DarthVesh said:
Tried installing just the ROM and Android 10 Beta gapps (stock and mini)., with and without Magisk as a fresh installation. it keeps kicking me back to TWRP....gonna try a fresh install of LOS16 to see if its just me
Click to expand...
Click to collapse
DarthVesh said:
cool thanks! that semi worked. 1st attempt w/ gapps and 2nd attempt w/o gapps allowed the rom to boot but within a couple of minutes into setup, steps the phone stopped working then the phone would auto-restart into recovery
Click to expand...
Click to collapse
try clean flash, boot (without gapps), as soon as you see the welcome screen, reboot, flash gapps (ideally mini or micro), and reboot. after that, try magisk and/or other stuff.
lawwd_have_merci said:
try clean flash, boot (without gapps), as soon as you see the welcome screen, reboot, flash gapps (ideally mini or micro), and reboot. after that, try magisk and/or other stuff.
Click to expand...
Click to collapse
Still did the same thing so tried today's build of crdroid which worked...only problem is Magisk hide for Netflix and Google Play but aren't needed immediately
DarthVesh said:
Still did the same thing so tried today's build of crdroid which worked...only problem is Magisk hide for Netflix and Google Play but aren't needed immediately
Click to expand...
Click to collapse
is crdroid barebones or does it have privacy guard/some type of decent permissions manager?
lawwd_have_merci said:
is crdroid barebones or does it have privacy guard/some type of decent permissions manager?
Click to expand...
Click to collapse
It does have privacy guard I haven't checked all other features yet but from my understanding, it uses LineageOS 's code as it's base code
Alright!! All aboard the Lineage 17.0 train..
Great work codeworkx.
Regards.
Thanks codeworkx for the Lineage 17.
(deleted)
i think there's some issue detecting my SIM card from Vodafone PT. doenst ask me for a PIN, and like previous users reported, after a minute or two, phone restarts to recovery. maybe we need a full wipe.
@codeworkx any idea about this?
regards
edit: fixed. had to restore my original EFS.
infected_ said:
i think there's some issue detecting my SIM card from Vodafone PT. doenst ask me for a PIN, and like previous users reported, after a minute or two, phone restarts to recovery. maybe we need a full wipe.
@codeworkx any idea about this?
regards
edit: fixed. had to restore my original EFS.
Click to expand...
Click to collapse
fixed the sim detection or fixed the reboots?
The firmware link in OP has no files in it (it's a link to the 17.0 directory). The latest official firmware is in the 16.0 directory. Should we just go with the latest 16.0 firmware and expect things to be OK, or what? Thanks.
Related
[TREBLE] Project Treble for LEECO MAX 2 (x2)
PHP:
#include "std_disclaimer.h"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
### What is Treble? ###
https://android-developers.googleblog.com/2017/05/here-comes-treble-modular-base-for.html?m=1
I'll keep the technical details about treble away from this thread as it has been covered by xda already.
If you want to know more about that visit here : https://source.android.com/devices/architecture/
Treble is everywhere, so why shouldn't x2 join it?
I'm proud to announce that Le Max2 will now fully support project treble and you can flash Generic System Images (GSI) and even Android P. Exciting right ?
You just need to follow the instructions mentioned and you're good to go.
## How we did it? ##
You might be wondering how I managed to get treble support...
NO, I didn't repartition the phone so you shouldn't worry about bricking the phone unless the directions were not followed properly.
There is an empty and unformatted partition in the phone called "last_parti" with a size of <589mb> and I converted that to our vendor partition, similar to how OnePlus devices were able to achieve teble support without the need to repartition.
You may doubt that that you will still be able to flash stock eui rom, but yes u can and we have tested it. If you encounter any error no 7 during eui flashing? Please switch to a non-treble build of TWRP or just delete block checking in update-script.
If you have any difficulties? You may join our telegram group for help :
https://t.me/joinchat/HFzBDlHXN-52-GZBg7725w
## Things you'll need to download (instructions are below):
New method :
1) Treble supported TWRP : New one by @GalaticStryder https://drive.google.com/open?id=1mx-uGryLXiIR7fDSDL4iBPdXhd7qLHjQ
2) Treble supported builds can be found here : https://www.androidfilehost.com/?fid=5862345805528055916
Previous method :
1) Partition creator zip : https://www.androidfilehost.com/?fid=5862345805528055960
2) Treble supported TWRP : https://www.androidfilehost.com/?fid=5862345805528055961
3) Treble supported builds can be found here : https://www.androidfilehost.com/?fid=5862345805528055916
Let's trebelize your x2 shall we?
**Important: Instructions are absolutly clear, so please carefully follow the steps as written below. I shall not be held responsible for any bricked devices. You do this on your own risk.
New method :
1) Flash the Treble supported TWRP. Again there are multiple ways to flash TWRP like
Use TWRP and flash the new recovery as an image in the recovery partition.
Use fastboot on the computer to flash the recovery image.
If you have root access then you can use an app like Flashify to flash the recovery.
2) Reboot to recovery to ensure the treble version is launched.
3) In the "Advanced" menu please click and swipe on "Treblelize"
4) Try to wipe vendor partition. If Treblelize worked? It should wipe without errors.
Optionally, you can also try to mount Vendor partition to see if it mounts without errors too.
4) After completing 1-4 your device will have vendor partition but it won't be ready to flash GSIs. For being able to do it goto step
5) Wipe system, cache, dalvik cache and data.
6) Flash the AEX Treble ROM which you downloaded earlier.
Previous Method :
1)Flash the Treble supported TWRP. Again there are multiple ways to flash TWRP like
Use TWRP and flash the new recovery as an image in the recovery partition.
Use fastboot on the computer to flash the recovery image.
If you have root access then you can use an app like Flashify to flash the recovery.
2) Reboot to recovery once flashed. (Even if u flashed through twrp ,you should reboot to recovery again)
3) Flash the partition creator zip now. After flashing it it might show an error about cannot mount /vendor, ignore it and go on to
the next step.
4) Click wipe on TWRP homepage, select vendor and uncheck all other partitions and swipe to wipe. Nice you have successfully
created vendor partition.
optional. You can check if you are able to mount /vendor partition from the recovery.
5) After completing 1-4 your device will have vendor partition but it won't be ready to flash GSIs. For being able to do it goto step
6) Wipe system, cache, dalvik cache and data.
7) Flash the AEX Treble ROM which you downloaded earlier.
Bingo! You have successfully trebelized your x2!
Time for some DO NOTs
1) NEVER wipe /vendor. If you do that your device won't work with any GSI. (u should wipe vendor only if u flash non treble rom )In case you accidentally wiped it you can flash AEX Treble rom to get it back. I might provide a vendor.img but don't think like doing it right now.
2) NEVER install A/B GSIs. Our device is treble enabled but doesn't have an A/B partition structure. Le Max2 support A only GSIs.
Instructions for flashing GSI of any Rom
1) Download a GSI from here : https://forum.xda-developers.com/project-treble/trebleenabled-device-development
2) If it is in a zip archive, then please unpack it.
3) You can find instructions here : https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
and reboot
Want to try more awesome things like installing Android P?
Instructions for flashing Android P GSI :
Complete credit for P image goes to : @erfanoabdi
Xda link for P GSI : https://forum.xda-developers.com/project-treble/trebleenabled-device-development/rom-android-p-developer-preview-t3816659
Steps:
1) Download link for P gsi (DP4): https://androidfilehost.com/?w=files&flid=279295
2) Wipe all Paritions except : vendor, internal storage
3) Install P system image to system
4) Mount vendor in TWRP
5) Flash POST-sGSI zips from 1 to 3 in priority
6) Then flash my sensor fix zip here : https://drive.google.com/open?id=11l4p6NxwixMSQlTLhLM_8wuXpvmrNpJq
and reboot
Volte Fix for P : https://drive.google.com/file/d/1h-2qTwhUidU9gDBFzj86RMfZn-vwLOnG/view#
BUGS IN ANDROID P GSI
VOLTE-its fixed
U tell me
Ok, all the best to you!
It is not easy to make complete treble with Zero Bugs
and we tried our best in making that.
I want to include all the contributers so the list is quite large.
Credits and contributors :
@shivatejapeddi (yeah I myself worked very hard to achieve Treble for x2)
@davidevinavil (literally helped me in creating partition and helped in solving crucial bugs )
@ThE_MarD (our official lineage contributer and helped me in solving some bugs)
@Chityanj (helped me with server and testing)
@prajjwal.laad (tester)
@Abhishek4587Kumar (tester)
@yaser59527 (tester)
@Rk585(dunno)
@GalaticStryder (for his newer and easier method to "Treblelize" x2)
Please let us know if we missed anyone.
Donations :
We worked very hard for fixing things and making things work, and I finised all my free google credits and am now using a paid legacy server for building roms.
Want to donate me ?
You can Here : https://www.paypal.me/shivatejapeddi
XDA:DevDB Information
[TREBLE] Project Treble for LEECO MAX 2 (x2) (Complete), Tool/Utility for the LeEco Le Max 2
Contributors
shivatejapeddi, ThE_MarD, Chityanj
Source Code: https://github.com/Chityanj/treble_devicetree
Version Information
Status: Stable
Current Stable Version: 8.1.0
Stable Release Date: 2018-07-23
Created 2018-07-22
Last Updated 2018-09-01
reserved
.Guys If you have any problem or confusion ask us in telegram group or XDA before proceeding
.
Congratulations! Thanks everyone to work in this project!..
Great work guys.
good!
Wow! Impressive stuff guys! How is the P GSI? Working well?
****! All of you are incredible, thanks a mil for this hard work.
I have no words
Congrats to all devs involved
I am unable to understand anything. So dumb.
Pro3 users come to congratulate. How do I admire it! With the same CPU, zl1 can't use Android P.
It's a new way of life Thank you all.
This really works nice, and very easy process,. I am running the AEX treble ROM at the moment, but tried the P gsi for a while - it booted up OK and runs, looks nice, but has a message on boot saying there is an error with the device, and has a notification that the P system is updating that never seems to complete and so you can't log in to google account or complete phone set up.
kanagawaben said:
This really works nice, and very easy process,. I am running the AEX treble ROM at the moment, but tried the P gsi for a while - it booted up OK and runs, looks nice, but has a message on boot saying there is an error with the device, and has a notification that the P system is updating that never seems to complete and so you can't log in to google account or complete phone set up.
Click to expand...
Click to collapse
Did you flash post GSI zips for P?
prajjwal.laad said:
Did you flash post GSI zips for P?
Click to expand...
Click to collapse
Yes, the three of them
kanagawaben said:
Yes, the three of them
Click to expand...
Click to collapse
Ahh. Then it's typical GSI behaviour. Maybe a final version will be more stable.
Thanks to all of the developers for bringing the much awaited treble support in our device.
kanagawaben said:
This really works nice, and very easy process,. I am running the AEX treble ROM at the moment, but tried the P gsi for a while - it booted up OK and runs, looks nice, but has a message on boot saying there is an error with the device, and has a notification that the P system is updating that never seems to complete and so you can't log in to google account or complete phone set up.
Click to expand...
Click to collapse
U should install google play services app link is there in that android p gsi XDA ,download and install problem solved
Crystal-L said:
Pro3 users come to congratulate. How do I admire it! With the same CPU, zl1 can't use Android P.
Click to expand...
Click to collapse
Hi don't worry, pro 3 will get very soon, devs working on it,
shivatejapeddi said:
U should install google play services app link is there in that android p gsi XDA ,download and install problem solved
Click to expand...
Click to collapse
Should have noticed that link earlier when i first tried. many thanks!
just wanted to add i got FC while restoring from the cloud on my google account, i think it was called data transfer tool, i had click on the 'i' to bring up the service/app and then give it storage permissions to continue. after that everything back and even my apps are now updating from the play store.:good:
edit 2: also for those needing usb connectivity after for whatever reason you can enable by going to developer options and changing default usb configuration to file transfer. learning do and donts as i go here as well lol
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://wiki.lineageos.org/devices/r5
Official nightlies for International Oppo R5/R5s (R8106) has arrived!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Important information
This thread is for LineageOS 15.1 builds for International Oppo R5/R5s (R8106). The following will not be supported here:
Custom kernels
Mods
Xposed
Installation
First time flashing LineageOS 15.1 on your device, or coming from another ROM?
Flash Project Spectrum as outlined here.
Flash unlockable bootloader obtained from here via stock recovery.
Unlock bootloader (fastboot oem unlock).
Flash compatible custom recovery.
Download the nightly/snapshot zip.
Perform a backup of your current ROM (optional).
Wipe data/factory reset.
Flash LineageOS.
(Optionally) flash Google Apps.
Reboot.
For more details, please see here.
Updating your TWRP recovery is recommended. Official TWRP isn't compatible ATM.
For CyanogenMod 13/14.1 users, see here.
Official Builds
https://download.lineageos.org/r5
Google Apps
http://opengapps.org/
Known Issue/Bugs
Found a bug? Random Reboot etc.
Please post logs.
Changelog
https://www.lineageoslog.com/15.1/r5
Source
https://github.com/LineageOS
Kernel: https://github.com/LineageOS/android_kernel_oppo_msm8939
Device: https://github.com/LineageOS/android_device_oppo_r5
Credits
LineageOS Community. I'm not the maintainer of it.
Official maintainer: Big thanks to:good: @maniac103
First of all big big thank you @maniac103 for supporting this device
Next I already found a bug as I can't connect to wifi. It tries to connect then the status stays on "connection saved". I've tried everything with wifi password, without and even WPS won't work. I've tested 20180724 and 20180731
Felt butter smooth but didn't do very much as I switched back to good working 14.1 pretty quick
Error 7 in TWRP with install.
Hi, thanks for the hard work, I have an Oppo r5s int version. I have tried to install/ update 15.1 and I get error 7 in TWRP. I have to unzip the ROM and edit the update script to get it to install, and I have had to do this with each nightly that has been released. What can I do to avoid this, I never had a problem with 14.1? I have tried a clean and dirty flash but get the same result. Another problem is gapps, I have tried to install arm 8. 1 within TWRP but the installation freezes. The gapps on my phone still works perfectly but are from the previous version of lineage 14.1. Does the gapps 8.1 take a long time to install as it overwrites the previous version or do I just leave it?
You probably have an old version of TWRP. Update to this version and you should be good to go: https://androidfilehost.com/?fid=673791459329072194
Maybe this also solves your GApps problem. If you install 15.1 your old GApps get deleted. I always flash the nano version as it is lighter and faster
Error 7 in TWRP with install.
mwayne said:
You probably have an old version of TWRP. Update to this version and you should be good to go: https://androidfilehost.com/?fid=673791459329072194
Maybe this also solves your GApps problem. If you install 15.1 your old GApps get deleted. I always flash the nano version as it is lighter and faster
Click to expand...
Click to collapse
Thanks, you are a star for guessing correctly. I had a slight suspicion it might be TWRP as I was on version 3.0.3.0. I did try and download it from the TWRP website but they never put the a version that works with the R5s, I tried the R7s version as I heard that works but it didn't. Your link for twrp worked perfectly, after that was installed I reflashed the latest nightly, no more error 7 and finally GApps 8.1 nano (always nano) again perfect. I hope this helps anyone else that has the same problems and again many thanks to you and the devs.
:good:
davendiva said:
Thanks, you are a star for guessing correctly. I had a slight suspicion it might be TWRP as I was on version 3.0.3.0. I did try and download it from the TWRP website but they never put the a version that works with the R5s, I tried the R7s version as I heard that works but it didn't. Your link for twrp worked perfectly, after that was installed I reflashed the latest nightly, no more error 7 and finally GApps 8.1 nano (always nano) again perfect. I hope this helps anyone else that has the same problems and again many thanks to you and the devs.
:good:
Click to expand...
Click to collapse
You're welcome. I had the same issue at first. Is your wifi working?
mwayne said:
You're welcome. I had the same issue at first. Is your wifi working?
Click to expand...
Click to collapse
Hi, I only had and issue with the wifi on the very first 15.1 nightly (20180710) it was very temperamental and would work then stop. So I reverted back to a backup of lineage 14.1 I had made prior to this, I guessed that being the very first nightly it could be a bit buggy. The next 15.1 nightly (20180717) which I flashed straight over 14.1 without any wipe in TWRP worked perfectly and wifi is operating as expected and has done with the 2 following 15.1 nightlies which is up to present. I have used my R5S on several different WiFi connections and all is functioning properly. Is your wifi working OK?
davendiva said:
Hi, I only had and issue with the wifi on the very first 15.1 nightly (20180710) it was very temperamental and would work then stop. So I reverted back to a backup of lineage 14.1 I had made prior to this, I guessed that being the very first nightly it could be a bit buggy. The next 15.1 nightly (20180717) which I flashed straight over 14.1 without any wipe in TWRP worked perfectly and wifi is operating as expected and has done with the 2 following 15.1 nightlies which is up to present. I have used my R5S on several different WiFi connections and all is functioning properly. Is your wifi working OK?
Click to expand...
Click to collapse
Thanks for the info. I just dirty flashed 20180731 (no wipe dalvik/cache) and it works perfect
mwayne said:
Thanks for the info. I just dirty flashed 20180731 (no wipe dalvik/cache) and it works perfect
Click to expand...
Click to collapse
Excellent, I'm glad you solved your problem, we both got there in the end. It should be simple from now on by using the update in the settings menu instead of messing around in TWRP manually.
mwayne said:
https://wiki.lineageos.org/devices/r5
Official nightlies for International Oppo R5/R5s (R8106) has arrived!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Important information
This thread is for LineageOS 15.1 builds for International Oppo R5/R5s (R8106). The following will not be supported here:
Custom kernels
Mods
Xposed
Installation
First time flashing LineageOS 15.1 on your device, or coming from another ROM?
Flash Project Spectrum as outlined here.
Flash unlockable bootloader obtained from here via stock recovery.
Unlock bootloader (fastboot oem unlock).
Flash compatible custom recovery.
Download the nightly/snapshot zip.
Perform a backup of your current ROM (optional).
Wipe data/factory reset.
Flash LineageOS.
(Optionally) flash Google Apps.
Reboot.
For more details, please see here.
Updating your TWRP recovery is recommended. Official TWRP isn't compatible ATM.
For CyanogenMod 13/14.1 users, see here.
Official Builds
https://download.lineageos.org/r5
Google Apps
http://opengapps.org/
Known Issue/Bugs
Found a bug? Random Reboot etc.
Please post logs.
Changelog
https://www.lineageoslog.com/15.1/r5
Source
https://github.com/LineageOS
Kernel: https://github.com/LineageOS/android_kernel_oppo_msm8939
Device: https://github.com/LineageOS/android_device_oppo_r5
Credits
LineageOS Community. I'm not the maintainer of it.
Official maintainer: Big thanks to:good: @maniac103
Click to expand...
Click to collapse
I got a issue with my wifi, I can't tunr on and searching for wifi network.
Can you fix this bug.
Thank you
Read the previous messages. You can flash straight over lineageos 14.1 without any wipe with the latest twrp installed with the latest 15.1 nightly
I can not reboot to recovery by holding the power button and volume down button after I falsh twrp-3.2.1-0-r5-20180110.img in fastboot.
I can only get into the system setup ,but the device does not respound when I touch the screen.
My device is OPPO R8107,the same hardware of R8106 version;Already flashed the Full Wipe Package.
I see a couple of problems with WiFi here. I too am having problems with the WiFi. I tried wiping the entire disk, all sections including the dalvik cache, system, data and cache and then re-installed again but I find the Wifi turns itself off as soon as I try to turn it on. I noticed some other people had similar problems, with their MAC addresses showing as 'Unavailable' or 02:00:00:00:00:00 which was suggested to be encryption on the disk which is why I wiped everything and re-installed again.
I installed this over an original Oppo R5 installation, following the instructions on the Lineage wiki for the R5.
Does anyone have any suggestions?
I should add that I installed version lineage-15.1-20181016-nightly-r5-signed. I have also tried a 'dirty flash' over the top of an existing install of Lineage which also seems to have the same problem.
FuLiTheOne said:
I can not reboot to recovery by holding the power button and volume down button after I falsh twrp-3.2.1-0-r5-20180110.img in fastboot.
I can only get into the system setup ,but the device does not respound when I touch the screen.
My device is OPPO R8107,the same hardware of R8106 version;Already flashed the Full Wipe Package.
Click to expand...
Click to collapse
The stage I installed TWRP is after you have flashed project spectrum recovery & rom and then unlocked the bootloader. The recovery can reset itself to the original if you reboot your phone with the computer. As soon as you have flashed TWRP from fastboot, unplug from the computer and then press power and vol down and hold them untill it reboots. Only use the twrp that mwayne posted earlier as the official TWRP site downloads don't work. If this doesn't work the issue might be because yours is the Chinese version, the R8106 is the global version.
---------- Post added at 08:20 AM ---------- Previous post was at 07:57 AM ----------
mkstevo said:
I see a couple of problems with WiFi here. I too am having problems with the WiFi. I tried wiping the entire disk, all sections including the dalvik cache, system, data and cache and then re-installed again but I find the Wifi turns itself off as soon as I try to turn it on. I noticed some other people had similar problems, with their MAC addresses showing as 'Unavailable' or 02:00:00:00:00:00 which was suggested to be encryption on the disk which is why I wiped everything and re-installed again.
I installed this over an original Oppo R5 installation, following the instructions on the Lineage wiki for the R5.
Does anyone have any suggestions?
I should add that I installed version lineage-15.1-20181016-nightly-r5-signed. I have also tried a 'dirty flash' over the top of an existing install of Lineage which also seems to have the same problem.
Click to expand...
Click to collapse
Hi, this are the steps I made for installing 15.1 and I have no issues with wifi other than the very first nightly.
1. Follow the steps from https://wiki.lineageos.org/devices/r5/install
2. Use only TWRP from mwayne's link from an earlier post.
https://androidfilehost.com/?fid=673791459329072194
3. Flash any lineage 14.1 rom first, this is important.
4. Once installed reboot phone and download the latest lineage 15.1 nightly and GApps ARM 8.1 nano onto phone.
5. Boot recovery, select the 15.1 and install then do the same with gapps. Once finished just reboot device. Do not wipe or format anything before or after the install in TWRP this time, just install and reboot.
6. You can go to gplay and add any more GApps you require.
Hope this helps
davendiva said:
The stage I installed TWRP is after you have flashed project spectrum recovery & rom and then unlocked the bootloader. The recovery can reset itself to the original if you reboot your phone with the computer. As soon as you have flashed TWRP from fastboot, unplug from the computer and then press power and vol down and hold them untill it reboots. Only use the twrp that mwayne posted earlier as the official TWRP site downloads don't work. If this doesn't work the issue might be because yours is the Chinese version, the R8106 is the global version.
---------- Post added at 08:20 AM ---------- Previous post was at 07:57 AM ----------
Hi, this are the steps I made for installing 15.1 and I have no issues with wifi other than the very first nightly.
1. Follow the steps from https://wiki.lineageos.org/devices/r5/install
2. Use only TWRP from mwayne's link from an earlier post.
https://androidfilehost.com/?fid=673791459329072194
3. Flash any lineage 14.1 rom first, this is important.
4. Once installed reboot phone and download the latest lineage 15.1 nightly and GApps ARM 8.1 nano onto phone.
5. Boot recovery, select the 15.1 and install then do the same with gapps. Once finished just reboot device. Do not wipe or format anything before or after the install in TWRP this time, just install and reboot.
6. You can go to gplay and add any more GApps you require.
Hope this helps
Click to expand...
Click to collapse
Hello.
I really appreciate your assistance here. I have tried to find a copy of the 14.1 rom for the R5 but they appear to have been removed from LineageOS website. Thinking you meant 'any' 14.1 rom, I downloaded one for the Oppo N3/N5 and attempted to install it but the install fails with the message that it is the wrong file for the device.
Am I looking in the wrong place for the 14.1 rom? Or should I be doing something to force the install of the N3/N5 version?
Sorry if I'm showing my stupidity here...
mkstevo said:
Hello.
I really appreciate your assistance here. I have tried to find a copy of the 14.1 rom for the R5 but they appear to have been removed from LineageOS website. Thinking you meant 'any' 14.1 rom, I downloaded one for the Oppo N3/N5 and attempted to install it but the install fails with the message that it is the wrong file for the device.
Am I looking in the wrong place for the 14.1 rom? Or should I be doing something to force the install of the N3/N5 version?
Sorry if I'm showing my stupidity here...
Click to expand...
Click to collapse
Hi, don't install anything other than the rom for the specific model. You're in luck that I found a lineage 14.1 on my pc. Click the link below
https://drive.google.com/file/d/1ndr2tI49GAaeHPDUgcOgNykBIZQ_J4wy/view?usp=drivesdk
Good luck.
davendiva said:
Hi, don't install anything other than the rom for the specific model. You're in luck that I found a lineage 14.1 on my pc. Click the link below
https://drive.google.com/file/d/1ndr2tI49GAaeHPDUgcOgNykBIZQ_J4wy/view?usp=drivesdk
Good luck.
Click to expand...
Click to collapse
Super thanks. I'll give it a go.
Many, many thanks for your kindness in locating the version 14 for me. I have today managed to install this onto my Oppo R5 and am delighted to say that it is working superbly, WiFi included.
As this version includes the Trebuchet launcher, I'm quite happy to stick with V14 for the time being, especially given that it is working and took me ages to set up as I would like. I prefer the Trebuchet launcher to most others and have actually installed the generic version of it (Catapult) on previous devices.
I'd like to say thanks again, you've helped a 50+ year old out immensely.
i am having a problem installing Lineage OS Version 15.1 and latest version 16 nightly. the error code 7 appears in all version available to download on the official website and tried to edit the script just to make the installation work. it did flashed the ROM, it will boot on the system, however in some unknown reason the device will freeze then the screen will turn off( but it seems like it did not shutdown, the device seems ACTIVE but the screen is OFF ). so i needed to hold the power button to reboot the device and the problem will be encounter again. the device will freeze after a few seconds after the device is booted or rebooted. i tried to wipe the data cache, dalvik, factory reset, no gapps installed do it over and over tried to install again then wipe cache/dalvik all possible way i know fix it but no luck. i even tried to boot the device on safe mode yet the problem still occurs. i can't even use my device even just for a minute to make a log.
I need help. I realized that my phone is r8107 rather than r8106. When I was trying to unlock the bootloader I couldn't install spectrum recovery. Is there any way to deal with it?
Help!
Is there anybody still have the nightlies lineageOS 14.1 ROM of OPPO R5?
SonyAOSP builds by @davidteri91 (This ROM has included GAPPS)
Code:
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's working :
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
Camera
Audio
GPS
What's not working :
Wi-Fi HotSpot 5Ghz
Miracast
Random reboots
Maybe more...
Report all found bugs to the sony bugtracker: https://github.com/sonyxperiadev/bug_tracker/issues
Steps for Flash:
fastboot flash oem xxxxx.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot erase userdata (if needed or you on stock)
Downloads :
ROM: https://androidfilehost.com/?w=files&flid=286595&sort_by=date&sort_dir=DESC
OEM: https://developer.sony.com/file/download/software-binaries-for-aosp-pie-android-9-0-kernel-4-9-loire/
TWRP: https://eu.dl.twrp.me/suzu/
Warning! From april build for dual sim use new patch from 2019.04.23. in attachment.
Sources:
SonyXperiaDev: https://github.com/sonyxperiadev?tab=repositories
SonyAOSP: https://github.com/SonyAosp
Contributors:
@davidteri91
ROM OS Version: 9
ROM Kernel: Linux 4.9.x
ROM Firmware Required: 34.4.A.2.118
Created: 2019-03-24
Last Updated: 2019-04-23
Successfully installed the ROM (the only Pie ROM for F5122 here I can flash that has GApps, plus the installation process is quite easy).
- Wi-Fi 5Ghz works for me.
- "There's an internal problem with your device. Contact your manufacturer for details" pops up after boot (probably due to the kernel, which is kinda annoying).
- There seems to be something wrong with TWRP 3.2.3-0 on this ROM. I could install and use it once, but after reboot it just disappeared.
- ...
Still testing. Thanks for the work!
can a step by step guide/process for noobs be povided here?
I am on stock unrooted 8.0 Oreo
prasad12ka4 said:
can a step by step guide/process for noobs be povided here?
I am on stock unrooted 8.0 Oreo
Click to expand...
Click to collapse
- Download everything in the links above (ROM, TWRP and OEM)
- Extract ROM, OEM to "platform-tools" (your adb folder)
- Shift click "platform-tools", open as cmd
- Enable USB-debug on your phone
In cmd:
adb devices
adb reboot bootloader
fastboot flash oem "oem.img"
fastboot flash boot "boot.img"
fastboot flash system "system.img"
fastboot erase userdata
--> Reboot, done. After boot, flash recovery TWRP if you want. That's what I did for this ROM.
P/s: I flashed stock Oreo with Emma before flashing this ROM.
LOLisLIFE said:
Successfully installed the ROM (the only Pie ROM for F5122 here I can flash that has GApps, plus the installation process is quite easy).
- Wi-Fi 5Ghz works for me.
- "There's an internal problem with your device. Contact your manufacturer for details" pops up after boot (probably due to the kernel, which is kinda annoying).
- There seems to be something wrong with TWRP 3.2.3-0 on this ROM. I could install and use it once, but after reboot it just disappeared.
- ...
Still testing. Thanks for the work!
Click to expand...
Click to collapse
Can I flash magisk?
I used this ROM some time ago, that build overheated a lot, and had some reboots, I couldn't get root in any possible way
Maybe this version is rootable
realthrash said:
I used this ROM some time ago, that build overheated a lot, and had some reboots, I couldn't get root in any possible way
Maybe this version is rootable
Click to expand...
Click to collapse
All versions of SonyAOSP build can have root with Magisk 18+
lookmanns14 said:
Can I flash magisk?
Click to expand...
Click to collapse
of course
Jurn_Software said:
All versions of SonyAOSP build can have root with Magisk 18+
Click to expand...
Click to collapse
I need to boot up to system, then reboot to TWRP and root, but since this ROM deletes the Recovery it's a little bit complicated
realthrash said:
I need to boot up to system, then reboot to TWRP and root, but since this ROM deletes the Recovery it's a little bit complicated
Click to expand...
Click to collapse
donwload and reflash twrp 3.2.3-2 recovery via adb
Is possible to add dual sim via build,prop?
khriiza said:
Is possible to add dual sim via build,prop?
Click to expand...
Click to collapse
yes, with this patch
Security patch March, April to be?
[email protected] said:
Security patch March, April to be?
Click to expand...
Click to collapse
April security patch are coming in few days, stay tuned
Jurn_Software said:
April security patch are coming in few days, stay tuned
Click to expand...
Click to collapse
Can you make an optimized kernel for this ROM?
LOLisLIFE said:
Can you make an optimized kernel for this ROM?
Click to expand...
Click to collapse
I'm not a developer. Kernel provided by sonyxperiadev developers.
P.S. due to problems related to WiFi in tone platform ... New releases are delayed to next week ...
April security patch released!!!
https://androidfilehost.com/?fid=1395089523397948583
Jurn_Software said:
April security patch released!!!
https://androidfilehost.com/?fid=1395089523397948583
Click to expand...
Click to collapse
For install this ROM we need a unlocked bootloader right, random reboot is fixed in new build and can I install this ROM if I from AOSPA Pie beta ?
Mashrmallow said:
For install this ROM we need a unlocked bootloader right, random reboot is fixed in new build and can I install this ROM if I from AOSPA Pie beta ?
Click to expand...
Click to collapse
no, random reboots not fixed. I have two the last day
Mashrmallow said:
For install this ROM we need a unlocked bootloader right, random reboot is fixed in new build and can I install this ROM if I from AOSPA Pie beta ?
Click to expand...
Click to collapse
Are the random reboots as bad as AOSPA pie?
I heard people saying it's Quickstep (the recent apps UI) that caused the crashes. Maybe try using a non-quickstep launcher (eg. Nova) and report back?
LineageOS is a free, community built, aftermarket firmware distribution of android, which is designed to increase performance and reliability over stock android for your device.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Wiki.
Recovery
The LineageOS 17.1 reovery is recommended
If you still want to use TWRP never install the TWRP app as system app. Otherwise your device won't boot
Current lineage 17.1 shamu nightlies are based on the N6F27M October 2017 update from google.
So you should be using the radio and bootloader img from that update.
Before you flash a bootloader or radio image please boot to bootloader and check what you have currently installed. You might already have the right one and don't need to flash it again.
They can be extracted from the factory image on google's site here.
Or you can use the ones linked below that I already extracted:
radio-shamu-d4.01-9625-05.45+fsg-9625-02.117.img
bootloader-shamu-moto-apq8084-72.04.img
IMPORTANT NOTE FOR VERIZON USERS: Google released a separate October 2017 security update (NGI77B) just for verizon users that has a different radio. So you'll want to flash it. I repeat, THIS RADIO IS JUST FOR VERIZON USERS.
radio-shamu-d4.01-9625-05.51+fsg-9625-02.118.img
You can use fastboot to flash the bootloader and radio.
More information and installation instructions can be found on the LineageOS wiki here.
Download Links
LineageOS: https://download.lineageos.org/shamu
Google apps: Opengapps Use an ARM (not ARM64) package for Android 10
HEADS UP: When you initially install LineageOS, be sure you flash the gapps package with your ROM. If you boot your ROM, then go back and try to flash gapps after, you're gonna have a bad time.
Changelog
Builddate: 2020.06.17
Changes:
[new] June security updates
[new] LineageOS clock
Builddate: 2020.05.29
Changes:
[new] May security updates
[fix] ULL audio fixes
[new] Add back serif fonts
[fix] Screen turning itself on when no lockscreen is set
[new] Etar calendar
Builddate: 2020.04.12
Changes:
[new] April security updates ROM & kernel
Builddate: 2020.04.08
Changes:
[new] Initial LineagOS 17.1 release
Known Issues:
[bug] Trusted voice is not working and probably never will
[bug] TWRP is not able do decrypt your data if you encrypted it with lineage-16.0
[bug] IMS is not working - if you need it you have to stay on lineage-15.1
XDA:DevDB Information
LineageOS, ROM for the Nexus 6
Contributors
Elektroschmock, elektroschmock, npjohnson
Source Code: http://github.com/lineagos
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
Version Information
Status: Nightly
Created 2020-04-08
Last Updated 2020-04-08
Reserved
First build isn't out yet, but I don't want the LineageOS 16.0 thread to be spammed with 17.1 questions
Will waiting for the build you might want to read the Changlog for the first LineageOS 17.1 release:
Changelog 24
Will there be a possibility to root?
Should we wait for 17.1 to flash the radio and bootloader or can we do it now to get it out of the way?
What are the commands for flashing those two images?
Thanks @Elektroschmock and @npjohnson for keeping the Nexus 6 alive in 2020. :good:
Eazy said:
Will there be a possibility to root?
Click to expand...
Click to collapse
Yes you can use your root solution of choice.
Only thing coming with the ROM is adb root.
dlbarron said:
Should we wait for 17.1 to flash the radio and bootloader or can we do it now to get it out of the way?
What are the commands for flashing those two images?
Click to expand...
Click to collapse
Actually you should already have those radio and bootloader images if you had the latest stock image installed at one point.
Commands are:
fastboot flash bootlader [name_of_the_bootloader_image]
and
fastboot flash radio [name_of_the_radio_image]
Elektroschmock said:
Actually you should already have those radio and bootloader images if you had the latest stock image installed at one point.
Commands are:
fastboot flash bootlader [name_of_the_bootloader_image]
and
fastboot flash radio [name_of_the_radio_image]
Click to expand...
Click to collapse
Actually, I've been running Lineage and CM before that since I brought the phone home. So there's no way I had the latest stock image installed ever.
Thanks, I'm all set
Welp I did a stupid.
Flashed the new 17.1 recovery via fastboot. Then I tried to sideload via adb (based on the instructions) but Linux machine kept complaining about needs adb root. Tried with root permission nothing, Then came the stupid. Rebooted into recovery and tried to apply the update. Well that went how I expected, badly. Stuck on LOS loading screen.
Needed a fresh install anyway.
Stick to the instructions, guys.
BootloopedMillennials said:
Welp I did a stupid.
Flashed the new 17.1 recovery via fastboot. Then I tried to sideload via adb (based on the instructions) but Linux machine kept complaining about needs adb root. Tried with root permission nothing, Then came the stupid. Rebooted into recovery and tried to apply the update. Well that went how I expected, badly. Stuck on LOS loading screen.
Needed a fresh install anyway.
Stick to the instructions, guys.
Click to expand...
Click to collapse
Hello you can flash twrp with your pc after boot in twrp flash 17.1 + gapps micro + magisk 20.4 + wipe data + wipe dalvik + wipe cache reboot and it work perfectly ! Ps no intall twrp app in twrp recovery before reboot or you have bootloop Cordialy
BIG THANKS @Elektroschmock very Nice work
xrenoix said:
Hello you can flash twrp with your pc after boot in twrp flash 17.1 + gapps micro + magisk 20.4 + wipe data + wipe dalvik + wipe cache reboot and it work perfectly ! Ps no intall twrp app in twrp recovery before reboot or you have bootloop Cordialy
BIG THANKS @Elektroschmock very Nice work
Click to expand...
Click to collapse
My system got corrupted by the previous process. So I had to do a fresh install.
BootloopedMillennials said:
My system got corrupted by the previous process. So I had to do a fresh install.
Click to expand...
Click to collapse
Hello you have test wipe system with twrp ? Or test repair ? And use pico gapps for trébuchet launcher not work with mirco gapps but pixel launcher work ? !
whats the exact steps to do in twrp.as i stated in los 16 thread i am blind and require twrp open script command line to flash my lineage builds in the past as i have to also enable accessibility services and talkback and google text to speech . so can that also be done with lineage recovery or am i just stuck with twrp and then install lineage 17.1 and open gapps . What's the best advice in my situation .
mrk2815 said:
whats the exact steps to do in twrp.as i stated in los 16 thread i am blind and require twrp open script command line to flash my lineage builds in the past as i have to also enable accessibility services and talkback and google text to speech . so can that also be done with lineage recovery or am i just stuck with twrp and then install lineage 17.1 and open gapps . What's the best advice in my situation .
Click to expand...
Click to collapse
Best would be to use built in update. Unless you want to do a clean install, there's no reason to do it.
the update inside of lineage is blocking updating to lineage 17.1 , i tried tha earlier and i jsut tried it again. then it gives the link to the wiki page.so thats not going to work.i will have to do the old method of flashing through twrp or hoping that there is a command line approach to flashing lineage through lineage recovery.
mrk2815 said:
whats the exact steps to do in twrp.as i stated in los 16 thread i am blind and require twrp open script command line to flash my lineage builds in the past as i have to also enable accessibility services and talkback and google text to speech . so can that also be done with lineage recovery or am i just stuck with twrp and then install lineage 17.1 and open gapps . What's the best advice in my situation .
Click to expand...
Click to collapse
Sorry, I didn't ignore your question, but I first had to check.
It's kind of hard to imagine how a blind person would do it if you can see.
If you have Lineage recovery installed and are able to boot into recovery do the following steps:
Press the Volume Down button 1 time
Press the power button two times
You are now in the adb apply update mode.
There you can install all the zip files you want. I guess you script does the rebooting to system itself.
If you need further help just ask.
@Elektroschmock
Thanks for your hard work!
I have two questions, if lineage recovery wipe the internal storage every time when I wipe the data or system? and when I flash the boot animation it seems not work. May you give some suggestion? Thank you!
s_dino said:
@Elektroschmock
Thanks for your hard work!
I have two questions, if lineage recovery wipe the internal storage every time when I wipe the data or system? and when I flash the boot animation it seems not work. May you give some suggestion? Thank you!
Click to expand...
Click to collapse
The recovery doesn't do anything on it's own. If you want to wipe any partition you need to select the corrosponding entry in the recovery.
I don't know about which bootanimation you are talking about. Do you mean the bootloader?
Before you flash bootloader or radio image please boot to bootloader and check what you have currently installed. You might already have the right one.
Elektroschmock said:
The recovery doesn't do anything on it's own. If you want to wipe any partition you need to select the corrosponding entry in the recovery.
I don't know about which bootanimation you are talking about. Do you mean the bootloader?
Before you flash bootloader or radio image please boot to bootloader and check what you have currently installed. You might already have the right one.
Click to expand...
Click to collapse
In TWRP I can select only wipe data/cache/system, the internal storage can be retained. The lineage recovery haven't the "wipe internal storage" option, so how can I wipe the data/system and keep the internal storage at the same time? Do I need to update the recovery version when I update the system daily build?
I mean I want use the google original boot animation to replace the lineage boot animation, but not success.
I noticed this: "disable audio rotation tracking"
https://review.lineageos.org/c/LineageOS/android_device_moto_shamu/+/272403
Is that the end of stereo sound in landscape? (Of course if that is necessary to fix the loss of sound in calls, it is totally worth it, just curious).
s_dino said:
In TWRP I can select only wipe data/cache/system, the internal storage can be retained. The lineage recovery haven't the "wipe internal storage" option, so how can I wipe the data/system and keep the internal storage at the same time? Do I need to update the recovery version when I update the system daily build?
I mean I want use the google original boot animation to replace the lineage boot animation, but not success.
Click to expand...
Click to collapse
You still have those options:
Go to "Factory Reset"
There you can choose which partition you want to wipe.
- Wipe data/factory reset
- Wipe cache
- Wipe system
I guess you want the "wipe system" option
Sorry we don't support modifying our builds for obvius reasons. If you want to do that you are on your own. Sorry.
runekock said:
I noticed this: "disable audio rotation tracking"
https://review.lineageos.org/c/LineageOS/android_device_moto_shamu/+/272403
Is that the end of stereo sound in landscape? (Of course if that is necessary to fix the loss of sound in calls, it is totally worth it, just curious).
Click to expand...
Click to collapse
It's just a test. Non of us was able to trigger the loss of audio. Youl'll still have stereo but it won't switch channels if you turn your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my version for the Samsung Galaxy Note 2 LTE on LineageOS 19.1.
This is a beta build, also from the LineageOS side, there are typical functions still missing, so don't install it if you want a completely stable and completed ROM and don't report my already listet bugs!
Attention:
Sometimes it needs another reboot to find the sim card.
When you have BitGapps installed, you have to reflash them after every update!
This ROM is only tested with N7105, so maybe you could to give me a feedback if it does or does not work with all the different Note 2 LTE variants.
It theoretically should work for:
SGH-I317
SGH-I317M
SCH-I605
SPH-L900
SGH-T889
SHV-E250S
SHV-E250K
SHV-E250L
SC-02E
GT-N7105/N7105T
SGH-T889V
SHV-E250S/E250K/E250L
SC-02E (SGH-N025)
Here you can see how far everything is working for now.
Spoiler: Whats working
Boot
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
GPS
USB
Video playback (HW/SW)
Tethering via USB
RIL
OTA-Updates
Tethering via WIFI and Bluetooth
much more...
Spoiler: Whats not working
Random reboots
NFC
SD-Card can't be formatted as internal storage, this will cause a bootloop
Random losses of sim card
Spoiler: Links
TWRP
ROM
ROM Mega
Spoiler: Changelog
14.02.2022
08.03.2022
17.03.2022
25.03.2022
04.04.2022
19.04.2022
14.06.2022
29.09.2022
25.01.2023
Spoiler: How to improve GPS
You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /vendor/etc/gps.conf.
Or you try GPS Server Optimizer app for a faster 3D fix.
For both methods you need root rights.
I would recommend to use microG instead of BitGapps,
here you can find the installation instructions:
Spoiler: microG instructions
Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
Open Magisk and update the App (and do a reboot if it's asking)
Enable Zygisk in Magisk
Download and install microG installer in the Magisk manager, reboot
Download and install safetynet-fix in the Magisk manager, reboot
Check with a safetynet checker app and you should pass
Spoiler: If you're facing installation problems.
Samsung seems to use differen't partition tables for these devices,
so far we know a t889, I317 and maybe other devices != n7105 are having a too small HIDDEN (for us vendor) partition.
So if you're facing problems like here
Getting "E2001: Failed to update vendor image." during clean flash.
This means that you have to resize it, check out these two posts:
Manual way
Zip way
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Wanna improve your sound configs, control your charging current and more?
Now you can use my app to access all boeffla configurations, there will follow more functions.
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][12.x][N7105/T0LTE][BETA] LineageOS 19.1, ROM for the Samsung Galaxy Note 2 LTE
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 12.x S
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: LineageOS
Selinux: permissive, this only makes sense as soon the ROM is stable.
Version Information
Status: Beta
Created 2022-02-11
Last Updated 2023-01-25
*reserved
Update 14.02.2022:
Fixed APN setting problem at boot.
Update 15.02.2022:
Fixed GPS completely, including 3D fix
Fixed low signal for 3G and 2G network
thanks for this i cant install via twrp magisk
phone is stuck on samsung galaxy boot logo when booting. Boots normally for the first time after flashing. I installed magisk via twrp before booting for the first time. Then i updated magisk and it told me to reboot the phone. Phone is stuck on samsung galaxy boot logo. Twrp opens normally. I have waited for 25 minutes and nothing is happening, took the battery out and it have not changed anything. After wiping the phone and installing for the second time nothing changed.
tymgam said:
After wiping the phone and installing for the second time nothing changed.
Click to expand...
Click to collapse
I guess because Magisk reflashed itself.
Boot into TWRP, delete the /data/adb folder with the file manager.
Reboot into TWRP and reflash the ROM, now the kernel should be unpatched and it should boot up again.
Update 08.03.2022:
Synched with latest LineageOS sources
Update 17.03.2022:
Switched to Android 12L , attention, this could not work with your existing gapps! (mindthegapps will work)
A clean installation is recommended.
Is lineage os 19.1 still in beta or is it stable to download? In mine it says information where the download button is. It's a fantastic rom.
Update 25.03.2022:
Synced with latest LineageOS sources
Created possibility to disable the HW navigation keys (not really needed for full gesture navigation)
Fixed boot problem, which mostly appeared after booting from TWRP
Fixed shutdown bug (device restarted sometimes instead)
Update 04.04.2022:
Re-Implemented and enabled boeffla sound
Fail to install magisk.
what can i do if i need root?
god123456 said:
Fail to install magisk.
what can i do if i need root?
Click to expand...
Click to collapse
Try magisk 23.0 or 24.1.
html6405 said:
Try magisk 23.0 or 24.1.
Click to expand...
Click to collapse
thank you very much
installed 23.0 ,will try 24.1 later
Great news,
now you can download my app to access all boeffla settings like boeffla sound and also charging controls.
More features will follow .
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
Update 19.04.2022:
Synced with LineageOS sources
Update 14.06.2022:
Synced with LineageOS sources
Are there any users who want to test some RIL fixes?
i just got this device as well as the s3 i9300. happy to test some things for you as there doesnt seem to be too much activity