Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my version for the Samsung Galaxy Note 2 LTE on LineageOS 19.1.
This is a beta build, also from the LineageOS side, there are typical functions still missing, so don't install it if you want a completely stable and completed ROM and don't report my already listet bugs!
Attention:
Sometimes it needs another reboot to find the sim card.
When you have BitGapps installed, you have to reflash them after every update!
This ROM is only tested with N7105, so maybe you could to give me a feedback if it does or does not work with all the different Note 2 LTE variants.
It theoretically should work for:
SGH-I317
SGH-I317M
SCH-I605
SPH-L900
SGH-T889
SHV-E250S
SHV-E250K
SHV-E250L
SC-02E
GT-N7105/N7105T
SGH-T889V
SHV-E250S/E250K/E250L
SC-02E (SGH-N025)
Here you can see how far everything is working for now.
Spoiler: Whats working
Boot
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
GPS
USB
Video playback (HW/SW)
Tethering via USB
RIL
OTA-Updates
Tethering via WIFI and Bluetooth
much more...
Spoiler: Whats not working
Random reboots
NFC
SD-Card can't be formatted as internal storage, this will cause a bootloop
Random losses of sim card
Spoiler: Links
TWRP
ROM
ROM Mega
Spoiler: Changelog
14.02.2022
08.03.2022
17.03.2022
25.03.2022
04.04.2022
19.04.2022
14.06.2022
29.09.2022
25.01.2023
Spoiler: How to improve GPS
You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /vendor/etc/gps.conf.
Or you try GPS Server Optimizer app for a faster 3D fix.
For both methods you need root rights.
I would recommend to use microG instead of BitGapps,
here you can find the installation instructions:
Spoiler: microG instructions
Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
Open Magisk and update the App (and do a reboot if it's asking)
Enable Zygisk in Magisk
Download and install microG installer in the Magisk manager, reboot
Download and install safetynet-fix in the Magisk manager, reboot
Check with a safetynet checker app and you should pass
Spoiler: If you're facing installation problems.
Samsung seems to use differen't partition tables for these devices,
so far we know a t889, I317 and maybe other devices != n7105 are having a too small HIDDEN (for us vendor) partition.
So if you're facing problems like here
Getting "E2001: Failed to update vendor image." during clean flash.
This means that you have to resize it, check out these two posts:
Manual way
Zip way
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Wanna improve your sound configs, control your charging current and more?
Now you can use my app to access all boeffla configurations, there will follow more functions.
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][12.x][N7105/T0LTE][BETA] LineageOS 19.1, ROM for the Samsung Galaxy Note 2 LTE
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 12.x S
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: LineageOS
Selinux: permissive, this only makes sense as soon the ROM is stable.
Version Information
Status: Beta
Created 2022-02-11
Last Updated 2023-01-25
*reserved
Update 14.02.2022:
Fixed APN setting problem at boot.
Update 15.02.2022:
Fixed GPS completely, including 3D fix
Fixed low signal for 3G and 2G network
thanks for this i cant install via twrp magisk
phone is stuck on samsung galaxy boot logo when booting. Boots normally for the first time after flashing. I installed magisk via twrp before booting for the first time. Then i updated magisk and it told me to reboot the phone. Phone is stuck on samsung galaxy boot logo. Twrp opens normally. I have waited for 25 minutes and nothing is happening, took the battery out and it have not changed anything. After wiping the phone and installing for the second time nothing changed.
tymgam said:
After wiping the phone and installing for the second time nothing changed.
Click to expand...
Click to collapse
I guess because Magisk reflashed itself.
Boot into TWRP, delete the /data/adb folder with the file manager.
Reboot into TWRP and reflash the ROM, now the kernel should be unpatched and it should boot up again.
Update 08.03.2022:
Synched with latest LineageOS sources
Update 17.03.2022:
Switched to Android 12L , attention, this could not work with your existing gapps! (mindthegapps will work)
A clean installation is recommended.
Is lineage os 19.1 still in beta or is it stable to download? In mine it says information where the download button is. It's a fantastic rom.
Update 25.03.2022:
Synced with latest LineageOS sources
Created possibility to disable the HW navigation keys (not really needed for full gesture navigation)
Fixed boot problem, which mostly appeared after booting from TWRP
Fixed shutdown bug (device restarted sometimes instead)
Update 04.04.2022:
Re-Implemented and enabled boeffla sound
Fail to install magisk.
what can i do if i need root?
god123456 said:
Fail to install magisk.
what can i do if i need root?
Click to expand...
Click to collapse
Try magisk 23.0 or 24.1.
html6405 said:
Try magisk 23.0 or 24.1.
Click to expand...
Click to collapse
thank you very much
installed 23.0 ,will try 24.1 later
Great news,
now you can download my app to access all boeffla settings like boeffla sound and also charging controls.
More features will follow .
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
Update 19.04.2022:
Synced with LineageOS sources
Update 14.06.2022:
Synced with LineageOS sources
Are there any users who want to test some RIL fixes?
i just got this device as well as the s3 i9300. happy to test some things for you as there doesnt seem to be too much activity
Related
TeamWin's TWRP Touch Recovery for LG G3 - currently available only for F400 variantshttps://twrp.me/
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom “ROM” like OmniROM
You can find the source code for TWRP at github.com/omnirom/android_bootable_recovery/
Flashing Instructions
To install recovery images use Flashify / Rashr from Play Store or flash in your current recovery. Otherwise do the following:
1. Go to install, find and select the Images... button.
2. Browse to the image that you downloaded and select it.
3. Choose recovery and swipe to flash.
OR
1. Move recovery.img to internal storage.
2. Open terminal window/command prompt to execute following commands
Code:
adb shell
su
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/recovery
dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
exit
exit
adb reboot recovery
About this TWRP
compiled on LineageOS-14.1 source
always up-to-date
fixed screen brightness
permissive selinux
disabled logd/logcat in recovery
fuse exfat, ntfs-3g, jpeg, usb-otg support
external storage as default storage
touch to wake
backup of all partitions including modem, efs
crypto/decryption may work or not..
Changelog
* 170430
- Initial Build
- Disabled HW crypto due to build fails
* 170501
- Deleted unused flags
- Add back HW crypto
- exfat support
* 170507
- Disabled logd/logcat (fix for "device or resource busy", hopefully)
* 170519
- Updated to v3.1.1
- Fix Aroma Installer crash (hopefully)
Known issues
ZIP files with date check assert can't be installed (eg. crDroid) - Users should delete date check assert in binary by themselves.
AROMA Installer stucks at loading - will be fixed soon..
Download Links
Unofficial | Official
Sources
https://github.com/TheNoFace/android_device_lge_g3-common-TWRP/tree/twrp
(Based on https://review.lineageos.org/#/c/160056/)
Remember to do backup of your current recovery before installing
Any plans for suporting other G3 variants in future?
@fprhqkrtk303: Now have 2 version twrp to flash. Which one to choose to flash? Unofficial or official? Thanks!
Official TWRP for D855 is so bad... sorry to say that. It doesn't work properly and even if LineageOS recommends it it's just not able to flash LOS builds.
When you want to reboot in recovery it hangs in a bootloop and when you want to shut the device off it just turns on back. So far we only have the unofficial version for D855 fully working.
ahk31 said:
Any plans for suporting other G3 variants in future?
Click to expand...
Click to collapse
Planning to support more devices when F400 version is stable.
You can build your own TWRP using my source.
@chuyennho184 @andrewKode Official version from TWRP uses older device tree and actually no one maintains. Recommend using unofficial version.
@fprhqkrtk303: I saw update firmware on March 22th for F400 variants but I don't have a link. Do you have a link? Thanks for bother you.
Updated to v3.1.1 (170519)
fprhqkrtk303 said:
Updated to v3.1.1 (170519)
Click to expand...
Click to collapse
Is aroma bootloop problem fixed in this new version?
MESA said:
Is aroma bootloop problem fixed in this new version?
Click to expand...
Click to collapse
Not tested yet. Can you check?
fprhqkrtk303 said:
Not tested yet. Can you check?
Click to expand...
Click to collapse
Yes. Tried it yesterday. Bootloop problem is still present.
andrewKode said:
Official TWRP for D855 is so bad... sorry to say that. It doesn't work properly and even if LineageOS recommends it it's just not able to flash LOS builds.
When you want to reboot in recovery it hangs in a bootloop and when you want to shut the device off it just turns on back. So far we only have the unofficial version for D855 fully working.
Click to expand...
Click to collapse
LoL i maintain twrp for d855 i don't have any issue with that recovery(3.1.1) fully tested..
and this problem cause by bootloader..
or you mean this
Fixed rebooting when no OS is present (Dees_Troy)
"unofficial version for D855 fully working."
Nope dadi11 twrp encrypt no work.. ;]
ZjemCiKolege said:
LoL i maintain twrp for d855 i don't have any issue with that recovery(3.1.1) fully tested..
and this problem cause by bootloader..
or you mean this
Fixed rebooting when no OS is present (Dees_Troy)
"unofficial version for D855 fully working."
Nope dadi11 twrp encrypt no work.. ;]
Click to expand...
Click to collapse
Dude, Idk what you're maintaining but this is what happens:
- TWRP sometimes does not reboot back in recovery (it hangs on LG screen)
- hangs on flashing LineageOS
- When chosed to turn off the device from the recovery it turns back ON right after it shuts down.
andrewKode said:
Dude, Idk what you're maintaining but this is what happens:
- TWRP sometimes does not reboot back in recovery (it hangs on LG screen)
- hangs on flashing LineageOS
- When chosed to turn off the device from the recovery it turns back ON right after it shuts down.
Click to expand...
Click to collapse
1. I try but did not happen.
2. Build of lineage?(i flash each version from february to 21.04) no any issue.
3. Issue of custom rom(problem with turn on charger and boot same issue..) ;]
MESA said:
Is aroma bootloop problem fixed in this new version?
Click to expand...
Click to collapse
Hello, apparently no...
https://twrp.me/site/update/2017/05/19/twrp-3.1.1-0-released.html
If it's a software problem, it would be the problem of AROMA devs, but if it's related to software keys incompatibility it's will be the work of TWRP devs.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://wiki.lineageos.org/devices/r5
Official nightlies for International Oppo R5/R5s (R8106) has arrived!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Important information
This thread is for LineageOS 15.1 builds for International Oppo R5/R5s (R8106). The following will not be supported here:
Custom kernels
Mods
Xposed
Installation
First time flashing LineageOS 15.1 on your device, or coming from another ROM?
Flash Project Spectrum as outlined here.
Flash unlockable bootloader obtained from here via stock recovery.
Unlock bootloader (fastboot oem unlock).
Flash compatible custom recovery.
Download the nightly/snapshot zip.
Perform a backup of your current ROM (optional).
Wipe data/factory reset.
Flash LineageOS.
(Optionally) flash Google Apps.
Reboot.
For more details, please see here.
Updating your TWRP recovery is recommended. Official TWRP isn't compatible ATM.
For CyanogenMod 13/14.1 users, see here.
Official Builds
https://download.lineageos.org/r5
Google Apps
http://opengapps.org/
Known Issue/Bugs
Found a bug? Random Reboot etc.
Please post logs.
Changelog
https://www.lineageoslog.com/15.1/r5
Source
https://github.com/LineageOS
Kernel: https://github.com/LineageOS/android_kernel_oppo_msm8939
Device: https://github.com/LineageOS/android_device_oppo_r5
Credits
LineageOS Community. I'm not the maintainer of it.
Official maintainer: Big thanks to:good: @maniac103
First of all big big thank you @maniac103 for supporting this device
Next I already found a bug as I can't connect to wifi. It tries to connect then the status stays on "connection saved". I've tried everything with wifi password, without and even WPS won't work. I've tested 20180724 and 20180731
Felt butter smooth but didn't do very much as I switched back to good working 14.1 pretty quick
Error 7 in TWRP with install.
Hi, thanks for the hard work, I have an Oppo r5s int version. I have tried to install/ update 15.1 and I get error 7 in TWRP. I have to unzip the ROM and edit the update script to get it to install, and I have had to do this with each nightly that has been released. What can I do to avoid this, I never had a problem with 14.1? I have tried a clean and dirty flash but get the same result. Another problem is gapps, I have tried to install arm 8. 1 within TWRP but the installation freezes. The gapps on my phone still works perfectly but are from the previous version of lineage 14.1. Does the gapps 8.1 take a long time to install as it overwrites the previous version or do I just leave it?
You probably have an old version of TWRP. Update to this version and you should be good to go: https://androidfilehost.com/?fid=673791459329072194
Maybe this also solves your GApps problem. If you install 15.1 your old GApps get deleted. I always flash the nano version as it is lighter and faster
Error 7 in TWRP with install.
mwayne said:
You probably have an old version of TWRP. Update to this version and you should be good to go: https://androidfilehost.com/?fid=673791459329072194
Maybe this also solves your GApps problem. If you install 15.1 your old GApps get deleted. I always flash the nano version as it is lighter and faster
Click to expand...
Click to collapse
Thanks, you are a star for guessing correctly. I had a slight suspicion it might be TWRP as I was on version 3.0.3.0. I did try and download it from the TWRP website but they never put the a version that works with the R5s, I tried the R7s version as I heard that works but it didn't. Your link for twrp worked perfectly, after that was installed I reflashed the latest nightly, no more error 7 and finally GApps 8.1 nano (always nano) again perfect. I hope this helps anyone else that has the same problems and again many thanks to you and the devs.
:good:
davendiva said:
Thanks, you are a star for guessing correctly. I had a slight suspicion it might be TWRP as I was on version 3.0.3.0. I did try and download it from the TWRP website but they never put the a version that works with the R5s, I tried the R7s version as I heard that works but it didn't. Your link for twrp worked perfectly, after that was installed I reflashed the latest nightly, no more error 7 and finally GApps 8.1 nano (always nano) again perfect. I hope this helps anyone else that has the same problems and again many thanks to you and the devs.
:good:
Click to expand...
Click to collapse
You're welcome. I had the same issue at first. Is your wifi working?
mwayne said:
You're welcome. I had the same issue at first. Is your wifi working?
Click to expand...
Click to collapse
Hi, I only had and issue with the wifi on the very first 15.1 nightly (20180710) it was very temperamental and would work then stop. So I reverted back to a backup of lineage 14.1 I had made prior to this, I guessed that being the very first nightly it could be a bit buggy. The next 15.1 nightly (20180717) which I flashed straight over 14.1 without any wipe in TWRP worked perfectly and wifi is operating as expected and has done with the 2 following 15.1 nightlies which is up to present. I have used my R5S on several different WiFi connections and all is functioning properly. Is your wifi working OK?
davendiva said:
Hi, I only had and issue with the wifi on the very first 15.1 nightly (20180710) it was very temperamental and would work then stop. So I reverted back to a backup of lineage 14.1 I had made prior to this, I guessed that being the very first nightly it could be a bit buggy. The next 15.1 nightly (20180717) which I flashed straight over 14.1 without any wipe in TWRP worked perfectly and wifi is operating as expected and has done with the 2 following 15.1 nightlies which is up to present. I have used my R5S on several different WiFi connections and all is functioning properly. Is your wifi working OK?
Click to expand...
Click to collapse
Thanks for the info. I just dirty flashed 20180731 (no wipe dalvik/cache) and it works perfect
mwayne said:
Thanks for the info. I just dirty flashed 20180731 (no wipe dalvik/cache) and it works perfect
Click to expand...
Click to collapse
Excellent, I'm glad you solved your problem, we both got there in the end. It should be simple from now on by using the update in the settings menu instead of messing around in TWRP manually.
mwayne said:
https://wiki.lineageos.org/devices/r5
Official nightlies for International Oppo R5/R5s (R8106) has arrived!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Important information
This thread is for LineageOS 15.1 builds for International Oppo R5/R5s (R8106). The following will not be supported here:
Custom kernels
Mods
Xposed
Installation
First time flashing LineageOS 15.1 on your device, or coming from another ROM?
Flash Project Spectrum as outlined here.
Flash unlockable bootloader obtained from here via stock recovery.
Unlock bootloader (fastboot oem unlock).
Flash compatible custom recovery.
Download the nightly/snapshot zip.
Perform a backup of your current ROM (optional).
Wipe data/factory reset.
Flash LineageOS.
(Optionally) flash Google Apps.
Reboot.
For more details, please see here.
Updating your TWRP recovery is recommended. Official TWRP isn't compatible ATM.
For CyanogenMod 13/14.1 users, see here.
Official Builds
https://download.lineageos.org/r5
Google Apps
http://opengapps.org/
Known Issue/Bugs
Found a bug? Random Reboot etc.
Please post logs.
Changelog
https://www.lineageoslog.com/15.1/r5
Source
https://github.com/LineageOS
Kernel: https://github.com/LineageOS/android_kernel_oppo_msm8939
Device: https://github.com/LineageOS/android_device_oppo_r5
Credits
LineageOS Community. I'm not the maintainer of it.
Official maintainer: Big thanks to:good: @maniac103
Click to expand...
Click to collapse
I got a issue with my wifi, I can't tunr on and searching for wifi network.
Can you fix this bug.
Thank you
Read the previous messages. You can flash straight over lineageos 14.1 without any wipe with the latest twrp installed with the latest 15.1 nightly
I can not reboot to recovery by holding the power button and volume down button after I falsh twrp-3.2.1-0-r5-20180110.img in fastboot.
I can only get into the system setup ,but the device does not respound when I touch the screen.
My device is OPPO R8107,the same hardware of R8106 version;Already flashed the Full Wipe Package.
I see a couple of problems with WiFi here. I too am having problems with the WiFi. I tried wiping the entire disk, all sections including the dalvik cache, system, data and cache and then re-installed again but I find the Wifi turns itself off as soon as I try to turn it on. I noticed some other people had similar problems, with their MAC addresses showing as 'Unavailable' or 02:00:00:00:00:00 which was suggested to be encryption on the disk which is why I wiped everything and re-installed again.
I installed this over an original Oppo R5 installation, following the instructions on the Lineage wiki for the R5.
Does anyone have any suggestions?
I should add that I installed version lineage-15.1-20181016-nightly-r5-signed. I have also tried a 'dirty flash' over the top of an existing install of Lineage which also seems to have the same problem.
FuLiTheOne said:
I can not reboot to recovery by holding the power button and volume down button after I falsh twrp-3.2.1-0-r5-20180110.img in fastboot.
I can only get into the system setup ,but the device does not respound when I touch the screen.
My device is OPPO R8107,the same hardware of R8106 version;Already flashed the Full Wipe Package.
Click to expand...
Click to collapse
The stage I installed TWRP is after you have flashed project spectrum recovery & rom and then unlocked the bootloader. The recovery can reset itself to the original if you reboot your phone with the computer. As soon as you have flashed TWRP from fastboot, unplug from the computer and then press power and vol down and hold them untill it reboots. Only use the twrp that mwayne posted earlier as the official TWRP site downloads don't work. If this doesn't work the issue might be because yours is the Chinese version, the R8106 is the global version.
---------- Post added at 08:20 AM ---------- Previous post was at 07:57 AM ----------
mkstevo said:
I see a couple of problems with WiFi here. I too am having problems with the WiFi. I tried wiping the entire disk, all sections including the dalvik cache, system, data and cache and then re-installed again but I find the Wifi turns itself off as soon as I try to turn it on. I noticed some other people had similar problems, with their MAC addresses showing as 'Unavailable' or 02:00:00:00:00:00 which was suggested to be encryption on the disk which is why I wiped everything and re-installed again.
I installed this over an original Oppo R5 installation, following the instructions on the Lineage wiki for the R5.
Does anyone have any suggestions?
I should add that I installed version lineage-15.1-20181016-nightly-r5-signed. I have also tried a 'dirty flash' over the top of an existing install of Lineage which also seems to have the same problem.
Click to expand...
Click to collapse
Hi, this are the steps I made for installing 15.1 and I have no issues with wifi other than the very first nightly.
1. Follow the steps from https://wiki.lineageos.org/devices/r5/install
2. Use only TWRP from mwayne's link from an earlier post.
https://androidfilehost.com/?fid=673791459329072194
3. Flash any lineage 14.1 rom first, this is important.
4. Once installed reboot phone and download the latest lineage 15.1 nightly and GApps ARM 8.1 nano onto phone.
5. Boot recovery, select the 15.1 and install then do the same with gapps. Once finished just reboot device. Do not wipe or format anything before or after the install in TWRP this time, just install and reboot.
6. You can go to gplay and add any more GApps you require.
Hope this helps
davendiva said:
The stage I installed TWRP is after you have flashed project spectrum recovery & rom and then unlocked the bootloader. The recovery can reset itself to the original if you reboot your phone with the computer. As soon as you have flashed TWRP from fastboot, unplug from the computer and then press power and vol down and hold them untill it reboots. Only use the twrp that mwayne posted earlier as the official TWRP site downloads don't work. If this doesn't work the issue might be because yours is the Chinese version, the R8106 is the global version.
---------- Post added at 08:20 AM ---------- Previous post was at 07:57 AM ----------
Hi, this are the steps I made for installing 15.1 and I have no issues with wifi other than the very first nightly.
1. Follow the steps from https://wiki.lineageos.org/devices/r5/install
2. Use only TWRP from mwayne's link from an earlier post.
https://androidfilehost.com/?fid=673791459329072194
3. Flash any lineage 14.1 rom first, this is important.
4. Once installed reboot phone and download the latest lineage 15.1 nightly and GApps ARM 8.1 nano onto phone.
5. Boot recovery, select the 15.1 and install then do the same with gapps. Once finished just reboot device. Do not wipe or format anything before or after the install in TWRP this time, just install and reboot.
6. You can go to gplay and add any more GApps you require.
Hope this helps
Click to expand...
Click to collapse
Hello.
I really appreciate your assistance here. I have tried to find a copy of the 14.1 rom for the R5 but they appear to have been removed from LineageOS website. Thinking you meant 'any' 14.1 rom, I downloaded one for the Oppo N3/N5 and attempted to install it but the install fails with the message that it is the wrong file for the device.
Am I looking in the wrong place for the 14.1 rom? Or should I be doing something to force the install of the N3/N5 version?
Sorry if I'm showing my stupidity here...
mkstevo said:
Hello.
I really appreciate your assistance here. I have tried to find a copy of the 14.1 rom for the R5 but they appear to have been removed from LineageOS website. Thinking you meant 'any' 14.1 rom, I downloaded one for the Oppo N3/N5 and attempted to install it but the install fails with the message that it is the wrong file for the device.
Am I looking in the wrong place for the 14.1 rom? Or should I be doing something to force the install of the N3/N5 version?
Sorry if I'm showing my stupidity here...
Click to expand...
Click to collapse
Hi, don't install anything other than the rom for the specific model. You're in luck that I found a lineage 14.1 on my pc. Click the link below
https://drive.google.com/file/d/1ndr2tI49GAaeHPDUgcOgNykBIZQ_J4wy/view?usp=drivesdk
Good luck.
davendiva said:
Hi, don't install anything other than the rom for the specific model. You're in luck that I found a lineage 14.1 on my pc. Click the link below
https://drive.google.com/file/d/1ndr2tI49GAaeHPDUgcOgNykBIZQ_J4wy/view?usp=drivesdk
Good luck.
Click to expand...
Click to collapse
Super thanks. I'll give it a go.
Many, many thanks for your kindness in locating the version 14 for me. I have today managed to install this onto my Oppo R5 and am delighted to say that it is working superbly, WiFi included.
As this version includes the Trebuchet launcher, I'm quite happy to stick with V14 for the time being, especially given that it is working and took me ages to set up as I would like. I prefer the Trebuchet launcher to most others and have actually installed the generic version of it (Catapult) on previous devices.
I'd like to say thanks again, you've helped a 50+ year old out immensely.
i am having a problem installing Lineage OS Version 15.1 and latest version 16 nightly. the error code 7 appears in all version available to download on the official website and tried to edit the script just to make the installation work. it did flashed the ROM, it will boot on the system, however in some unknown reason the device will freeze then the screen will turn off( but it seems like it did not shutdown, the device seems ACTIVE but the screen is OFF ). so i needed to hold the power button to reboot the device and the problem will be encounter again. the device will freeze after a few seconds after the device is booted or rebooted. i tried to wipe the data cache, dalvik, factory reset, no gapps installed do it over and over tried to install again then wipe cache/dalvik all possible way i know fix it but no luck. i even tried to boot the device on safe mode yet the problem still occurs. i can't even use my device even just for a minute to make a log.
I need help. I realized that my phone is r8107 rather than r8106. When I was trying to unlock the bootloader I couldn't install spectrum recovery. Is there any way to deal with it?
Help!
Is there anybody still have the nightlies lineageOS 14.1 ROM of OPPO R5?
SonyAOSP builds by @davidteri91 (This ROM has included GAPPS)
Code:
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's working :
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
Camera
Audio
GPS
What's not working :
Wi-Fi HotSpot 5Ghz
Miracast
Random reboots
Maybe more...
Report all found bugs to the sony bugtracker: https://github.com/sonyxperiadev/bug_tracker/issues
Steps for Flash:
fastboot flash oem xxxxx.img
fastboot flash boot boot.img
fastboot flash system system.img
fastboot erase userdata (if needed or you on stock)
Downloads :
ROM: https://androidfilehost.com/?w=files&flid=286595&sort_by=date&sort_dir=DESC
OEM: https://developer.sony.com/file/download/software-binaries-for-aosp-pie-android-9-0-kernel-4-9-loire/
TWRP: https://eu.dl.twrp.me/suzu/
Warning! From april build for dual sim use new patch from 2019.04.23. in attachment.
Sources:
SonyXperiaDev: https://github.com/sonyxperiadev?tab=repositories
SonyAOSP: https://github.com/SonyAosp
Contributors:
@davidteri91
ROM OS Version: 9
ROM Kernel: Linux 4.9.x
ROM Firmware Required: 34.4.A.2.118
Created: 2019-03-24
Last Updated: 2019-04-23
Successfully installed the ROM (the only Pie ROM for F5122 here I can flash that has GApps, plus the installation process is quite easy).
- Wi-Fi 5Ghz works for me.
- "There's an internal problem with your device. Contact your manufacturer for details" pops up after boot (probably due to the kernel, which is kinda annoying).
- There seems to be something wrong with TWRP 3.2.3-0 on this ROM. I could install and use it once, but after reboot it just disappeared.
- ...
Still testing. Thanks for the work!
can a step by step guide/process for noobs be povided here?
I am on stock unrooted 8.0 Oreo
prasad12ka4 said:
can a step by step guide/process for noobs be povided here?
I am on stock unrooted 8.0 Oreo
Click to expand...
Click to collapse
- Download everything in the links above (ROM, TWRP and OEM)
- Extract ROM, OEM to "platform-tools" (your adb folder)
- Shift click "platform-tools", open as cmd
- Enable USB-debug on your phone
In cmd:
adb devices
adb reboot bootloader
fastboot flash oem "oem.img"
fastboot flash boot "boot.img"
fastboot flash system "system.img"
fastboot erase userdata
--> Reboot, done. After boot, flash recovery TWRP if you want. That's what I did for this ROM.
P/s: I flashed stock Oreo with Emma before flashing this ROM.
LOLisLIFE said:
Successfully installed the ROM (the only Pie ROM for F5122 here I can flash that has GApps, plus the installation process is quite easy).
- Wi-Fi 5Ghz works for me.
- "There's an internal problem with your device. Contact your manufacturer for details" pops up after boot (probably due to the kernel, which is kinda annoying).
- There seems to be something wrong with TWRP 3.2.3-0 on this ROM. I could install and use it once, but after reboot it just disappeared.
- ...
Still testing. Thanks for the work!
Click to expand...
Click to collapse
Can I flash magisk?
I used this ROM some time ago, that build overheated a lot, and had some reboots, I couldn't get root in any possible way
Maybe this version is rootable
realthrash said:
I used this ROM some time ago, that build overheated a lot, and had some reboots, I couldn't get root in any possible way
Maybe this version is rootable
Click to expand...
Click to collapse
All versions of SonyAOSP build can have root with Magisk 18+
lookmanns14 said:
Can I flash magisk?
Click to expand...
Click to collapse
of course
Jurn_Software said:
All versions of SonyAOSP build can have root with Magisk 18+
Click to expand...
Click to collapse
I need to boot up to system, then reboot to TWRP and root, but since this ROM deletes the Recovery it's a little bit complicated
realthrash said:
I need to boot up to system, then reboot to TWRP and root, but since this ROM deletes the Recovery it's a little bit complicated
Click to expand...
Click to collapse
donwload and reflash twrp 3.2.3-2 recovery via adb
Is possible to add dual sim via build,prop?
khriiza said:
Is possible to add dual sim via build,prop?
Click to expand...
Click to collapse
yes, with this patch
Security patch March, April to be?
[email protected] said:
Security patch March, April to be?
Click to expand...
Click to collapse
April security patch are coming in few days, stay tuned
Jurn_Software said:
April security patch are coming in few days, stay tuned
Click to expand...
Click to collapse
Can you make an optimized kernel for this ROM?
LOLisLIFE said:
Can you make an optimized kernel for this ROM?
Click to expand...
Click to collapse
I'm not a developer. Kernel provided by sonyxperiadev developers.
P.S. due to problems related to WiFi in tone platform ... New releases are delayed to next week ...
April security patch released!!!
https://androidfilehost.com/?fid=1395089523397948583
Jurn_Software said:
April security patch released!!!
https://androidfilehost.com/?fid=1395089523397948583
Click to expand...
Click to collapse
For install this ROM we need a unlocked bootloader right, random reboot is fixed in new build and can I install this ROM if I from AOSPA Pie beta ?
Mashrmallow said:
For install this ROM we need a unlocked bootloader right, random reboot is fixed in new build and can I install this ROM if I from AOSPA Pie beta ?
Click to expand...
Click to collapse
no, random reboots not fixed. I have two the last day
Mashrmallow said:
For install this ROM we need a unlocked bootloader right, random reboot is fixed in new build and can I install this ROM if I from AOSPA Pie beta ?
Click to expand...
Click to collapse
Are the random reboots as bad as AOSPA pie?
I heard people saying it's Quickstep (the recent apps UI) that caused the crashes. Maybe try using a non-quickstep launcher (eg. Nova) and report back?
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
SCREENSHOTS
3rd PARTY ADDONS/MODS
While we have no issues with people using supersu/magisk/xposed/custom kernels/etc, we can't provide support for users who have them installed.
This thread is not the right place to discuss about mods/addons.
HOW TO INSTALL LINEAGEOS
- Make sure your phone was running OxygenOS 5.1.4 at least once
- Remove custom encryption pins/passwords else decryption will fail!
- Upgrade to latest available official firmware
- Upgrade to latest available TWRP
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Unlock bootloader and install TWRP.
- Boot into TWRP.
- Perform a backup of your current ROM. (Optional)
- RECOMMENDED: Do a factory reset! No support if you didn't!
- Flash LineageOS.
- Optional: Install the Google Apps addon package. (see Downloads)
- Reboot
HOW TO UPDATE LINEAGEOS
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Flash LineageOS.
- Reboot
HOW TO UPGRADE LINEAGEOS FROM LOWER VERSION
- Upgrade to latest available official firmware
- Upgrade to latest available TWRP
- Download the LineageOS zip(s). (see Downloads)
- Copy the LineageOS zip to internal sdcard.
- Flash LineageOS.
- Update the Google Apps addon package if it was installed on your previous LineageOS version.
- Reboot
DOWNLOADS
LineageOS 17.0: Official | Unofficial
Firmware: https://sourceforge.net/projects/cheeseburgerdumplings/files/17.1/dumpling/firmware/
Migration-Tools: https://androidfilehost.com/?w=files&flid=254680 (Unofficial->Official, Official->Unofficial)
SU-Addon: Official | Unofficial
Google Apps: http://opengapps.org/ | BETA
TWRP: TWRP by codeworkx | Official
DEVELOPER RESOURCES
https://github.com/LineageOS/android_device_oneplus_dumpling
https://github.com/LineageOS/android_device_oneplus_msm8998-common
https://github.com/LineageOS/android_kernel_oneplus_msm8998
HOW TO CONTRIBUTE?
Send your patches up for review: https://review.lineageos.org/
TELEGRAM GROUP
https://t.me/joinchat/GQS-ghNaf-1YMpjSbh_puQ
Nice!!!
Any information on what's working or not?
Thanks a lot finally lineageOS 10 for dumpling
Great Stuff. ?
We are in safe hands yet again.
No, try it and report ?
Long live the 5T!
Tried installing just the ROM and Android 10 Beta gapps (stock and mini)., with and without Magisk as a fresh installation. it keeps kicking me back to TWRP....gonna try a fresh install of LOS16 to see if its just me
DarthVesh said:
Tried installing just the ROM and Android 10 Beta gapps (stock and mini)., with and without Magisk as a fresh installation. it keeps kicking me back to TWRP....gonna try a fresh install of LOS16 to see if its just me
Click to expand...
Click to collapse
flash codex's latest TWRP, ive heard people with same issue tried it and it worked for them.
lawwd_have_merci said:
flash codex's latest TWRP, ive heard people with same issue tried it and it worked for them.
Click to expand...
Click to collapse
cool thanks! that semi worked. 1st attempt w/ gapps and 2nd attempt w/o gapps allowed the rom to boot but within a couple of minutes into setup, steps the phone stopped working then the phone would auto-restart into recovery
DarthVesh said:
Tried installing just the ROM and Android 10 Beta gapps (stock and mini)., with and without Magisk as a fresh installation. it keeps kicking me back to TWRP....gonna try a fresh install of LOS16 to see if its just me
Click to expand...
Click to collapse
DarthVesh said:
cool thanks! that semi worked. 1st attempt w/ gapps and 2nd attempt w/o gapps allowed the rom to boot but within a couple of minutes into setup, steps the phone stopped working then the phone would auto-restart into recovery
Click to expand...
Click to collapse
try clean flash, boot (without gapps), as soon as you see the welcome screen, reboot, flash gapps (ideally mini or micro), and reboot. after that, try magisk and/or other stuff.
lawwd_have_merci said:
try clean flash, boot (without gapps), as soon as you see the welcome screen, reboot, flash gapps (ideally mini or micro), and reboot. after that, try magisk and/or other stuff.
Click to expand...
Click to collapse
Still did the same thing so tried today's build of crdroid which worked...only problem is Magisk hide for Netflix and Google Play but aren't needed immediately
DarthVesh said:
Still did the same thing so tried today's build of crdroid which worked...only problem is Magisk hide for Netflix and Google Play but aren't needed immediately
Click to expand...
Click to collapse
is crdroid barebones or does it have privacy guard/some type of decent permissions manager?
lawwd_have_merci said:
is crdroid barebones or does it have privacy guard/some type of decent permissions manager?
Click to expand...
Click to collapse
It does have privacy guard I haven't checked all other features yet but from my understanding, it uses LineageOS 's code as it's base code
Alright!! All aboard the Lineage 17.0 train..
Great work codeworkx.
Regards.
Thanks codeworkx for the Lineage 17.
(deleted)
i think there's some issue detecting my SIM card from Vodafone PT. doenst ask me for a PIN, and like previous users reported, after a minute or two, phone restarts to recovery. maybe we need a full wipe.
@codeworkx any idea about this?
regards
edit: fixed. had to restore my original EFS.
infected_ said:
i think there's some issue detecting my SIM card from Vodafone PT. doenst ask me for a PIN, and like previous users reported, after a minute or two, phone restarts to recovery. maybe we need a full wipe.
@codeworkx any idea about this?
regards
edit: fixed. had to restore my original EFS.
Click to expand...
Click to collapse
fixed the sim detection or fixed the reboots?
The firmware link in OP has no files in it (it's a link to the 17.0 directory). The latest official firmware is in the 16.0 directory. Should we just go with the latest 16.0 firmware and expect things to be OK, or what? Thanks.
Android Open Source Project - android-11.0.0_r17
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Credits: Google, Sony Xperia Developer World
-------------------------------------------------------------
Sorry for my english.
Hi everyone, this is the first time I am compiling a ROM.
It's just a test, as it seems to work I decided to share it with you.
-------------------------------------------------------------
Instructions:
Before you flash the images, make sure your device is unlocked through Sony’s unlock boot loader service and that the device is in Fastboot mode.
- Download the vendor image and flash first:
https://developer.sony.com/file/dow...es-for-aosp-android-11-0-kernel-4-14-yoshino/
- Unpack the vendor zip file to obtain the vendor image;
- Connect the device to your computer in Fastboot mode, by pressing volume up while inserting the USB cable. When the device is in Fastboot mode, the LED on the device will be illuminated in blue.
- Flash the vendor image by entering the following commands in a terminal window:
fastboot flash oem SW_binaries_for_Xperia_Android_<release version>_<platform>.img
- Download ROM:
http://www.mediafire.com/file/ph3z52u2staujx6/android-11.0.0_r17.zip/file
- Unpack the rom zip file to obtain the rom image;
- Flash the image by entering the following commands in a terminal window:
fastboot flash boot boot.img
fastboot flash recovery recovery.img ( Don't use the recovery in this rom, I've tested this TWRP 3.3.1 found here: https://forum.xda-developers.com/xperia-xz1/themes/twrp-3-3-0-aroma-compatible-ultra-low-t3922527 )
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash userdata userdata.img
-------------------------------------------------------------
Bugs:
- Tethering usb;
- Factory reset don't work;
- After the system is started the first time, restarting in recovery, the twrp goes into bootloop. To start twrp again you need to flash the userdata.img (factory reset) via fastboot;
- I don't know.
Tested:
- 4G;
- 3G;
- 2G;
- GPS;
- Voice Call;
- Wifi;
- Stock Camera;
- Fingerprint;
- Bluetooth.
-------------------------------------------------------------
I flashed the Android 11 GAPPS and everything seems to be working fine.
-------------------------------------------------------------
Source Code: https://github.com/sonyxperiadev/kernel/tree/aosp/LA.UM.7.1.r1
ROM OS Version: Android 11
ROM Kernel: Linux 4.14.196
Based On: AOSP
Security Patch: 05 November 2020
Version Information
Status: Test
Created 2020-07-11
Last Updated 2020-07-11
Can you share us the screenshots of ROM?
Also, is this ROM has Sony Music (Walkman) and Album app?
Demirag said:
Can you share us the screenshots of ROM?
Also, is this ROM has Sony Music (Walkman) and Album app?
Click to expand...
Click to collapse
I just downloaded the android 11 source code (40 Gb) and compiled it. So the rom is basic, it only has the main android stock apps:
phone, address book, calendar, camera, gallery and file browser.
If i try to flash it on my XZ Premium (G8141), can it be successfull? XZP is also Yoshino platform
gsep said:
Android Open Source Project - android-11.0.0_r17
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Credits: Google, Sony Xperia Developer World
-------------------------------------------------------------
Sorry for my english.
Hi everyone, this is the first time I am compiling a ROM.
It's just a test, as it seems to work I decided to share it with you.
-------------------------------------------------------------
Instructions:
Before you flash the images, make sure your device is unlocked through Sony’s unlock boot loader service and that the device is in Fastboot mode.
- Download the vendor image and flash first:
https://developer.sony.com/file/dow...es-for-aosp-android-11-0-kernel-4-14-yoshino/
- Unpack the vendor zip file to obtain the vendor image;
- Connect the device to your computer in Fastboot mode, by pressing volume up while inserting the USB cable. When the device is in Fastboot mode, the LED on the device will be illuminated in blue.
- Flash the vendor image by entering the following commands in a terminal window:
fastboot flash oem SW_binaries_for_Xperia_Android_<release version>_<platform>.img
- Download ROM:
http://www.mediafire.com/file/ph3z52u2staujx6/android-11.0.0_r17.zip/file
- Unpack the rom zip file to obtain the rom image;
- Flash the image by entering the following commands in a terminal window:
fastboot flash boot boot.img
fastboot flash recovery recovery.img ( Don't use the recovery in this rom, I've tested this TWRP 3.3.1 found here: https://forum.xda-developers.com/xperia-xz1/themes/twrp-3-3-0-aroma-compatible-ultra-low-t3922527 )
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash userdata userdata.img
-------------------------------------------------------------
Bugs:
- I don't know.
Tested:
- 4G;
- 3G;
- 2G;
- GPS;
- Voice Call;
- Wifi;
- Stock Camera;
- Fingerprint.
-------------------------------------------------------------
I flashed the Android 11 GAPPS and everything seems to be working fine.
-------------------------------------------------------------
ROM OS Version: Android 11
ROM Kernel: Linux 4.14.196
Based On: AOSP
Security Patch: 05 November 2020
Version Information
Status: Test
Created 2020-07-11
Last Updated 2020-07-11
Click to expand...
Click to collapse
I have tried this rom
thank you for your hard work.
In my opinion, this ROM is pretty good with almost no problems
But please fix Eraser All data (factory reset) from settings. i found it was always force closed
Too much drain on the battery, maybe because fingerprints always work without pressing power
The feature for displaying the frame rate needs to be improved because it is less accurate
a little troublesome because I can't enter TWRP maybe because I didn't flash recovery.img from zip
I will be looking forward to improvements of this rom
maybe I will change this comment after getting root access
elmirer said:
If i try to flash it on my XZ Premium (G8141), can it be successfull? XZP is also Yoshino platform
Click to expand...
Click to collapse
I recommend that you only use the rom that matches the codename of the device.
to avoid things that are not desirable
https://forum.xda-developers.com/xz-premium/development
elmirer said:
If i try to flash it on my XZ Premium (G8141), can it be successfull? XZP is also Yoshino platform
Click to expand...
Click to collapse
I don't know, it could but I wouldn't risk it.
starvirus10 said:
I have tried this rom
thank you for your hard work.
In my opinion, this ROM is pretty good with almost no problems
But please fix Eraser All data (factory reset) from settings. i found it was always force closed
Too much drain on the battery, maybe because fingerprints always work without pressing power
The feature for displaying the frame rate needs to be improved because it is less accurate
a little troublesome because I can't enter TWRP maybe because I didn't flash recovery.img from zip
I will be looking forward to improvements of this rom
maybe I will change this comment after getting root access
I recommend that you only use the rom that matches the codename of the device.
to avoid things that are not desirable
https://forum.xda-developers.com/xz-premium/development
Click to expand...
Click to collapse
Thanks for trying it.
I'll try to fix what you told me, but I don't guarantee that I will.
It also happened to me that the twrp did not start.
After re-flashing userdata.img (factory reset) via fastboot, twrp recovery started.
I assume twrp doesn't read the encrypted data and doesn't start.
Any advice is welcome.
Is it treble ready BY ANY CHANCE?
JimKatsanos said:
Is it treble ready BY ANY CHANCE?
Click to expand...
Click to collapse
I don't know, I haven't tried.
@gsep
Thanks for the Great work.
Someone who tried this rom mentioned that fingerprint works without pressing power, which I believe is really useful. I just wanted to know if it's Android 11 feature or you added it yourself?
I just downloaded and compiled the android 11 source code. I didn't make any changes to the code.
sohrab1985 said:
@gsep
Thanks for the Great work.
Someone who tried this rom mentioned that fingerprint works without pressing power, which I believe is really useful. I just wanted to know if it's Android 11 feature or you added it yourself?
Click to expand...
Click to collapse
This is actually a bug , firstly existent in android 10 but devs fixed it there ... so yeah
JimKatsanos said:
This is actually a bug , firstly existent in android 10 but devs fixed it there ... so yeah
Click to expand...
Click to collapse
It should be a feature rather than a bug, like AOF
Of course it's only a feature when it won't affect the battery drain or else it's a bug.
THREAD CLOSED
@gsep Please check your PM.
Regards,
shadowstep
Forum Moderator
EDIT: Thread re-opened.
doesn;twant to connect to wifi
it damn issue
Sorry for overspamming this thread but... Is the screen "lagging" bug still here in 11? Also , what about battery life?
JimKatsanos said:
Sorry for overspamming this thread but... Is the screen "lagging" bug still here in 11? Also , what about battery life?
Click to expand...
Click to collapse
At the moment no changes have been made. I don't know how long the battery life is, I use this device as a second smartphone, and I wanted to try to compile a rom to get the latest security patches. I have to learn a lot to start making changes to the source and I have to find the time to do it. If I don't have any problems I will certainly try to keep the security patches updated.