Hello,
I plan to buy a 7T Pro and am looking for a case/bumper.
Is it safe, that the 7T Pro's body is exactly the same as the one of the 7 Pro except the sensor position next to the cameras?
If it is, I could order the RhinoShield CrashGuard Bumper for the 7 Pro and use it on the 7T Pro.
TarkoonXDA said:
Hello,
I plan to buy a 7T Pro and am looking for a case/bumper.
Is it safe, that the 7T Pro's body is exactly the same as the one of the 7 Pro except the sensor position next to the cameras?
If it is, I could order the RhinoShield CrashGuard Bumper for the 7 Pro and use it on the 7T Pro.
Click to expand...
Click to collapse
Hi, I am one of the few rare cases who have used OnePlus 7 Pro and OnePlus 7t Pro in real life usage for a period of time. Had a 7 Pro which I used for 3 months before it fell and broke from the 6th floor of a building, damaging the set completely. Got the Insurance money, waited for a month and got 7t Pro now. Long story short, can confirm that the body is exactly the same as the 7 Pro, except the sensor. I had bought multiple covers for my 7 Pro and am using the remaining ones with the 7t Pro without any problem. So if you want to go ahead and get the rhino shield, please do so.
However, I would suggest wait for a month or so, I am sure Rhinoshield will launch another cover for OnePlus 7t Pro with the proper cut out for the sensor. That is what I am doing, except in my case it is a Nill kin ultra thin case I am waiting for
Thank you very much for your information from own experience!
The RhinoShield I plan to buy is a bumper with open back, so I think they will just sell the same for the 7T Pro in this case.
Yeah the body is the same, only different on the back with the Laser AF.
My Rhinoshield CrashGuard for the 7 Pro fit perfectly
Would love to see a photo of the Bumper on the 7T Pro.
:good:
Thank you! ??
Absolutely love this bumper. The back just feels to nice and looks to great to hide it behind a case. Even a transparent one...
It's not bad
How is it with the Horizon Light - can you still see it with the Bumper on?
I can't decide between the Rhinoshield Bumper and the Supcase thin fit with the tranparent back...
I got the thin fit Supcase and in my opinion take the Rhinoshield Bumper it is more safe and secure for your 7T pro.
Put a back covers like this http://https://www.amazon.co.uk/Full-Cover-Protector-crystal-clear-self-Healing-absorption-Transparent/dp/B081D59225/ref=sr_1_7?keywords=brotect+oneplus+7t+pro&qid=1574714692&sr=8-7
I'm waiting for the solidsuit 7t pro which comes out in december
I got the RhinoShield CrashGuard and can definitely NOT recommend it.
It feels nice and looks good, but it does not fit the 7t Pro well. It blocks a small part of the front cam so every picture gets a shade at the bottom of the picture...
parkbankrowdy said:
I got the RhinoShield CrashGuard and can definitely NOT recommend it.
It blocks a small part of the front cam so every picture gets a shade at the bottom of the picture...
Click to expand...
Click to collapse
I received mine earlier today and I cannot confirm your experience!
The RhinoShield fits really well, all cut-outs are perfet and in my case there's no bump that creats a shadow when using the front cam.
Maybe I am just lucky...
Maybe it's bad luck on my side then, contacted the manufacturer... Will keep you updated.
Confirm you're using the CrashGuard on the OnePlus 7t pro?
parkbankrowdy said:
Confirm you're using the CrashGuard on the OnePlus 7t pro?
Click to expand...
Click to collapse
Yes, I am also talking about the RhinoShiled Crash Guard for the 7T Pro (McLaren)
Hey can you post pics of the crash guard on the maclaren 7t pro please?
Sent from my SM-G975U using Tapatalk
bkeaver said:
Hey can you post pics of the crash guard on the maclaren 7t pro please?
Sent from my SM-G975U using Tapatalk
Click to expand...
Click to collapse
Yes, I can do that as soon as I receive the xtremeskin backside skin
Right now I am using the SupCase, but by mid next week I'll probably swith to the RhinoShield
As requested, thanks for the imei heads up.
Looks really good. On a side note, the one thing I hate about the McLaren design is that they have the IMEI number on the back of the phone. Dumbest damn thing ever put permanently on the back of a phone!
Sent from my SM-G975U using Tapatalk
bkeaver said:
Looks really good. On a side note, the one thing I hate about the McLaren design is that they have the IMEI number on the back of the phone. Dumbest damn thing ever put permanently on the back of a phone!
Click to expand...
Click to collapse
Hmmm, with the EU/Global version (HD913) the IMEI is NOT printed on the back...
But the HD913 version has the "beautiful" Shenzhen OnePlus company info on the back
Related
Hello, Nillkin made tempered glass for Oneplus 5, H (0.33mm) and H+ Pro (0.2mm) versions.
http://nillkin.org/smartphones-acce...5-a5000-accessories/nillkin-oneplus-5-a5000-h
http://nillkin.org/smartphones-acce...000-accessories/nillkin-oneplus-5-a5000-h-pro
Good product with pretty OC, using H+ Pro on Oneplus 3.
Thanks, ordered the 0.22 mm version
Thanks mate,
I was full of hope that nillkin will release a tgsp without those black borders and there it is just in time :victory:
I'm using a nillkin tgsp on my opo since day one and still love it.
I instantly ordered both variants, let's see which is the better one...
I would say there's no benefit of the pro version when using a case, but i will give it a try...
From the renders and the product description, the halo around the borders seem to be pretty significant
The search continues...
I personally love their oleophobic coating for years! Colorful border CP+ glass for 1+3 didn't work for me (some kind of mistake from Nillkin!), H+ Pro is still the best one (transparent type) I think.
Thanks for the info, ordered the 0.2mm one
Hopefully someone can do a nice review when they get it, I've ordered the Orzly protector already but I did enjoy a previous Nillkin one I had.
waiting for the nillkin sale to come on ebay . It will be cheap there .
Just order the Pro 0.2mm
However i see that there is no front camera cutout, but i don't think this is an issue.
Will post a review once it arrives
Any picture anyone?
roba93 said:
Just order the Pro 0.2mm
However i see that there is no front camera cutout, but i don't think this is an issue.
Will post a review once it arrives
Click to expand...
Click to collapse
Actually if there is no front camera cut out, you might get sun flare at certain angle......i think
Scann69 said:
Actually if there is no front camera cut out, you might get sun flare at certain angle......i think
Click to expand...
Click to collapse
hmm they didnt had cutouts for the 3T protectors aswell and they performed awsome.
So i will see once it arrives
Thank you for pointing out this
I ordered the H+ and a case. I hope the delivery takes not so long.
I have got some luck to purchase Oneplus 5!!! Finally, ordering glass and case myself too, joining to the team
Ordered H+ Pro
Mine just got shipped,
Will post some pictures once i have it applied
Hello all,
Sorry if I sound stupid, but I have to ask: what's the difference between the .33 and the .2 beside the thickness? One is stronger than the other one? Funny, the .33 is cheaper than the .2 one, so...
LeKeiser said:
Hello all,
Sorry if I sound stupid, but I have to ask: what's the difference between the .33 and the .2 beside the thickness? One is stronger than the other one? Funny, the .33 is cheaper than the .2 one, so...
Click to expand...
Click to collapse
Thats becasue the thinner will be less noticable on the screen, which is added value in comparison to the 0,33 one.
Ordered ! 0.20
Mikulec said:
Thats becasue the thinner will be less noticable on the screen, which is added value in comparison to the 0,33 one.
Click to expand...
Click to collapse
but is there a major difference between them? .33 much stronger than .2?
I wouldn't mind the added thickness if the display is more secured...
It’s great to see that realme has stepped up and made a flagship which is power packed and low priced at the same time. The back design and the realme branding looks cool on the device. So, should I go with the back protector to protect the back glass from scratches or only with the front one. Here are some of the screen protector options available for the X2Pro.
https://www.gadgetshieldz.com/realme-x2-pro-screen-protectors-guards.html
https://www.amazon.com/Realme-Prote...857372&sprefix=realme+x2+pro+S,aps,397&sr=8-7
I used a OnePlus 7t screen protector and it fit perfectly. That will give you more options (I used a super sheildz)
Pre-fitted screen protector the phone is shipped with no good?
beliz85 said:
Pre-fitted screen protector the phone is shipped with no good?
Click to expand...
Click to collapse
No good, pre-fitted protector is dust collector, also not anti fingerprint
necsynx said:
No good, pre-fitted protector is dust collector, also not anti fingerprint
Click to expand...
Click to collapse
I beg to differ.
I have the European version (I don't know if it matters) and the bundled case and screen protector are actually just fine.
I have no issue with it. And no fingerprints on it.
I feel to see where the issue is.
I'd say your best bet is to try out the default screen protector and see if it fits you. No need to buy another one straight away.
Regards
necsynx said:
No good, pre-fitted protector is dust collector, also not anti fingerprint
Click to expand...
Click to collapse
Correct
MixEvo said:
I used a OnePlus 7t screen protector and it fit perfectly. That will give you more options (I used a super sheildz)
Click to expand...
Click to collapse
Oneplus 7T is almost 1mm more narrow... Do they really fit? If they do I'll order this one:
https://www.amazon.com/gp/aw/d/B07ZTPXLVQ/ref=ox_sc_act_image_1?smid=A279LIVC2BRR8I&psc=1
Also, does the fingerprint scanner still work after applying the screen protector?
jm98 said:
Oneplus 7T is almost 1mm more narrow... Do they really fit? If they do I'll order this one:
https://www.amazon.com/gp/aw/d/B07ZTPXLVQ/ref=ox_sc_act_image_1?smid=A279LIVC2BRR8I&psc=1
Also, does the fingerprint scanner still work after applying the screen protector?
Click to expand...
Click to collapse
That's what I used it fit good enough for me. I didn't try the fingerprint on my x2 pro (didn't use the phone enough) but on my Moto one zoom the in display reader works fine with the super sheildz on (and I'm sure the x2 pro has a better scanner)
Does a tempered glass protector work with the fingerprint scanner?
Anyone tried Official OnePlus 7T 3D Tempered Glass Screen Protector Black? Is it good fit?
Anyone could please recommend an official version of tempered glass protector to buy from Amazon? by ''official'' I mean an item done for this phone only. Or maybe one from another phone that can fit perfectly always from Amazon? Thanks everybody
https://smile.amazon.de/dp/B08154J1RV/ref=cm_sw_r_cp_apa_i_SEv7DbTQWM68R
I bought this, phone will arrive tomorrow so more to say by then
EDIT: It arrived, but it is not even glass, its plastic
I bought this from Amazon:
ivoler 3 Pezzi Pellicola Vetro Temperato per Oppo Realme X2 PRO [Garanzia a Vita], Pellicola Protettiva Protezione per Schermo per Oppo Realme X2 PRO
It looks like is working good so far and covers almost the whole screen a part for some space left on the notch and the obvious curved sides. Overall a nice one made for this phone and you'll find 3 in the pack as well I can't say anything about durability so far because I never dropped the phone yet and I've been using it for few days only. I'll keep you update on this though if you like. Can't post links yet but I can send it privately. Cheers
ZorroRZ said:
I bought this from Amazon:
ivoler 3 Pezzi Pellicola Vetro Temperato per Oppo Realme X2 PRO [Garanzia a Vita], Pellicola Protettiva Protezione per Schermo per Oppo Realme X2 PRO
It looks like is working good so far and covers almost the whole screen a part for some space left on the notch and the obvious curved sides. Overall a nice one made for this phone and you'll find 3 in the pack as well I can't say anything about durability so far because I never dropped the phone yet and I've been using it for few days only. I'll keep you update on this though if you like. Can't post links yet but I can send it privately. Cheers
Click to expand...
Click to collapse
can you provide a link please
nosh10 said:
can you provide a link please
Click to expand...
Click to collapse
Bought it too: https://www.amazon.it/gp/product/B08197RFPG/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
Overall I'm quite satisfied with that even though the notch is not tailored perfectly on the x2 pro. The visible screen is covered decently and that leaves room for eventual backcovers with borders. The price is adeguate, probably there are better products out there but considering the phone is a new release in Italy and there are not that much screen protectors on Amazon.... so far, so good. Applied 2+ weeks ago and it's still ok.
Using hydrogel protector on front and back...
Did someone try a camera lens protector?
Which one can be recommended?
I bought Nillkin H+ Pro for the OnePlus 7T and it fits perfectly.
Alexthekiller1993 said:
I bought Nillkin H+ Pro for the OnePlus 7T and it fits perfectly.
Click to expand...
Click to collapse
Where did you buy this tempered glass?
Enviado do meu LG-H815 através do Tapatalk
I've bought a Tempered Privacy and Blue light one
Picked up the McClaren 5g version from T-Mobile yesterday, and I'm in love with the phone, throughout. Beautiful design, hardware, software. Everything.
I wanted a protective case however did not want to cover the beautiful back.
I figure the combo is cheap enough that I can get something else if this doesn't fit my needs.
Anyone else tried either of the two products?
Crisisx1 said:
Picked up the McClaren 5g version from T-Mobile yesterday, and I'm in love with the phone, throughout. Beautiful design, hardware, software. Everything.
I wanted a protective case however did not want to cover the beautiful back.
I figure the combo is cheap enough that I can get something else if this doesn't fit my needs.
Anyone else tried either of the two products?
Click to expand...
Click to collapse
What combo are you referring to? (No link or images provided.)
RhinoShield has the Crash Guard bumper & a clear skin for the backside (screen protector also available).
This combo definitely fits what you're looking for.
As with all of the Crash Guard bumpers, it adds quite a bit of an increase to the overall width of the phone. If that isn't a factor one way or the other, I'd say you need to look no further.
I'm sure there's some aluminum bumpers available from eBay & the like, but, they offer little to no protection & likely have an even more uncomfortable grip vs the included case or, the RhinoShield Bumper.
Sent from my OnePlus7TProNR using XDA Labs
Hmm not sure why the photos didn't post. Trying again.
Crisisx1 said:
Hmm not sure why the photos didn't post. Trying again.
Click to expand...
Click to collapse
THX for posting the pix. :good:
There's several different mfgs with this design to be found on Amazon/e-Bay/Ali Express, etc......
I like the idea of clear cases in general, but, most seem to have some nagging traits....
The rainbow effect comes to mind right off the bat, as well as being a fingerprint magnet.
Most don't wear well after a few weeks of use, with scuffs/scratches.
A matte clear case may negate most of the above, but, likely will obscure the true appearance of the decorative backside.
I've seen some all-glass cases, encasing the entire phone, front & back, might not be a bad way to go.
https://www.amazon.com/Magnetic-Samsung-Double-Sided-Tempered-Protection/dp/B07WR7DKD1
Sent from my OnePlus7TProNR using XDA Labs
KOLIOSIS said:
THX for posting the pix. :good:
There's several different mfgs with this design to be found on Amazon/e-Bay/Ali Express, etc......
I like the idea of clear cases in general, but, most seem to have some nagging traits....
The rainbow effect comes to mind right off the bat, as well as being a fingerprint magnet.
Most don't wear well after a few weeks of use, with scuffs/scratches.
A matte clear case may negate most of the above, but, likely will obscure the true appearance of the decorative backside.
I've seen some all-glass cases, encasing the entire phone, front & back, might not be a bad way to go.
https://www.amazon.com/Magnetic-Samsung-Double-Sided-Tempered-Protection/dp/B07WR7DKD1
Click to expand...
Click to collapse
I've had luck with uag clear cases, however, as you know they aren't truly 100% transparent and clear due to their honey comb pattern design.
That all glass case is a pretty interesting design, never seen it before. I wouldn't imagine it would look as good after 3,4 drops compared to a plastic /poly case.
I'm definitely not opposed to trying a different combo if this one doesn't work, as it was less than 20 dollars. I did look into the dome whitestone glass sp, however I'm opposed to applying an actual adhesive to my screen.
Any other decent glass sp that doesn't require adhesive?
Here's the case. After closely examining the edges of the phone and case, I am not sure this screen protector will be compatible as I will interfere at edges and pull up.
The screen protector and case fit perfectly. A bit different installation method then what I'm usually used to, but got it perfect on the second try. Very pleased.
Crisisx1 said:
The screen protector and case fit perfectly. A bit different installation method then what I'm usually used to, but got it perfect on the second try. Very pleased.
Click to expand...
Click to collapse
Do you have a Link? The one above didn't Work.
sh1z0 said:
Do you have a Link? The one above didn't Work.
Click to expand...
Click to collapse
Here is the screen protector
https://www.amazon.com/dp/B07QTXX694/ref=cm_sw_r_other_apa_i_JDjaEb9W5M6QK
Here is the install video
Here is pic trying to show the case edge and sp slight separation. A bit hard to see, but at $8 for 3 sp, I'm surprised by the quality of the sp.
Update.. I've been using the 7t pro mclaren case with the sp and fits flawlessly
Crisisx1 said:
Here's the case. After closely examining the edges of the phone and case, I am not sure this screen protector will be compatible as I will interfere at edges and pull up.
Click to expand...
Click to collapse
Your case isn't even compatible with the phone. You are covering the laser autofocus area on the back. The 7 Pro cases don't have the necessary cutout. You need a 7T Pro case.
I know this was already addressed in a different thread. No longer using that case. Now using the one that came with the mclaren.
LLStarks said:
Your case isn't even compatible with the phone. You are covering the laser autofocus area on the back. The 7 Pro cases don't have the necessary cutout. You need a 7T Pro case.
Click to expand...
Click to collapse
Up
Im using Supcase Unicorn Beetle case with an Alinsea Screen Protector. Everything fits perfectly.
lilaznboi5582 said:
Im using Supcase Unicorn Beetle case with an Alinsea Screen Protector. Everything fits perfectly.
Click to expand...
Click to collapse
I will get my OP7T Pro in two weeks and I'm going to buy exactly this combination. I am curious if everything fits.
Sent from my OnePlus 5T using XDA Labs
Paulikid said:
I will get my OP7T Pro in two weeks and I'm going to buy exactly this combination. I am curious if everything fits.
Sent from my OnePlus 5T using XDA Labs
Click to expand...
Click to collapse
It fits nicely like it is made for each other. it has maybe 1mm gap between the glass protector and case.
Thinking of upgrading my oneplus 5T to a oneplus 7T pro.
Is a screen protector applied to the screen at factory as on the 5T?
Sent from my ONEPLUS A5010 using XDA-Developers Legacy app
subarctic2123 said:
Thinking of upgrading my oneplus 5T to a oneplus 7T pro.
Is a screen protector applied to the screen at factory as on the 5T?
Sent from my ONEPLUS A5010 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yes a plastic screen protector applied at factory but not tempered glass protection
My McLaren (TMobile) did not come with a screen protector on it, not even the plastic type that all my other 1+ devices came preinstalled with. I thought this was odd but some folks around confirmed this device does not come with one preinstalled
LittleRedDot said:
My McLaren (TMobile) did not come with a screen protector on it, not even the plastic type that all my other 1+ devices came preinstalled with. I thought this was odd but some folks around confirmed this device does not come with one preinstalled
Click to expand...
Click to collapse
You are correct. The T-Mobile version of the OnePlus 7 Pro and the OnePlus 7T Pro 5G McLaren Edition do not come with a screen protector pre-installed which I find odd as even the Samsung Galaxy S10/S10+ come with a screen protector ND they have curved screens just like the 7 Pro and 7T Pro. The only OnePlus phones from T-Mobile that had them were the 6T and the 7T.
I have bought one in Middle East area and it has a plastic screen protector.
T-Mobile version definitely did not come pre-installed with one. DO NOT buy the one they sell in the T-Mobile store, it's garbage especially for $50 and they would not let me return it. I'm pretty angry. Tempered glass but it's not full adhesive, you see a line around the edge of the screen and it slides around/lifts extremely easily.
Now I have an iQ Shield one I bought on Amazon.
I was skeptical because it's one of those softer plastic screen protectors that you install with a solution spray and a squeegee, which I've always struggled with.
This one seems to be fine though, and it isn't too tacky like others I've used! Crystal clear, no bubbles, and no haziness even after only a couple hours from install.
T-Mobile mclaren USA. No screen protector. Check my other thread for an awesome one.
I went with the OUNIER tempered glass from Amazon and I'm not happy with it. It's impossible to get the fingerprint scanner to recognize your print and the dot matrix pattern can be seen in all lighting and all angles. I made my decision based on price, won't be buying it again.
Get the Whitestone and call it a day.
LittleRedDot said:
My McLaren (TMobile) did not come with a screen protector on it, not even the plastic type that all my other 1+ devices came preinstalled with. I thought this was odd but some folks around confirmed this device does not come with one preinstalled
Click to expand...
Click to collapse
yeah mine that I received last week was the same, no screen protector just another way for T-mobile to get a sale with accessories
How do I check if it has factory screen protector? I can't see it and I don't really want to use fingernail to check Is it visible straight away? Anyone have some close-up picture?
@flither I don't have a picture but it was cleary visible that a screen protector was pre-installed (on my 7T Pro McLaren).
With a case it might be a bit more difficult to see the plastic screen protector right away, but if you hold the phone in your hands with no case applied, you should be able to see the edge screen protector/display.
thanks for help @stetre76, I thought it's the phone's design because the screen protector is perfectly applied
LittleRedDot said:
I went with the OUNIER tempered glass from Amazon and I'm not happy with it. It's impossible to get the fingerprint scanner to recognize your print and the dot matrix pattern can be seen in all lighting and all angles. I made my decision based on price, won't be buying it again.
Click to expand...
Click to collapse
Big facts. **** just came off.
What i DID get to replace (with prime delivery) was ailun screen protector. The liquid glass adhesive plus screen protector.
Absolutely recommend. Do follow video instructions. It was kinda confusing. Also to note, when it says 2 minutes uv curing for the sides and edges (for anyone potentially getting this, perhaps similar)
What it MEANS is 2 minutes per side/edge. Learned that the hard way after liquid kept coming out thinking I was done.
I was using a Pixel 6 with a big case that made it so heavy and now after changing to GT 2 pro, this phone is light as a feather, and love to use it naked! Now it is getting scratched so a skin or a thinnest case could be a good fit for this phone. Pls, recommend me some...
This one:
https://www.aliexpress.com/item/1005004248743285.html
It's 0,3 mm, but protects cameras and whole frame. I've used the same model on some of my previous phones.
Vipitus said:
This one:
https://www.aliexpress.com/item/1005004248743285.html
It's 0,3 mm, but protects cameras and whole frame. I've used the same model on some of my previous phones.
Click to expand...
Click to collapse
Thanks for the reply, it is so thin but is there any color options?
thepredator_ said:
Thanks for the reply, it is so thin but is there any color options?
Click to expand...
Click to collapse
Only matte translucent white and matte black as you can see.
thepredator_ said:
I was using a Pixel 6 with a big case that made it so heavy and now after changing to GT 2 pro, this phone is light as a feather, and love to use it naked! Now it is getting scratched so a skin or a thinnest case could be a good fit for this phone. Pls, recommend me some...
Click to expand...
Click to collapse
You can try Gadgetshieldz phone skins because I got a skin for my previous phone and the quality is good as the price is not too affordable! I've ordered one for this phone and I'll share some images after I get it delivered!