Related
I will tell you how to go from stock to a custom rom running Nougat.
Notice:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in these ROMs
* before flashing them! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
First, you must go to Marshmallow from Lollipop. If you are already on stock Marshmallow, skip this step.
1. First off, you'd need to download and extract two files. SP Flash Tools and the 6.0 stock rom.. You should use the first link, but if you have an idea what you're doing, nothing's wrong with flashing with TWRP rather than SP Flash, if you already have it installed for whatever reason.
2. In SP Flash Tools, set the download agent to MTK_AllInOne_DA.bin found in the SP Flash folder, and the scatter file to MT6753_Android_scatter.txt in the extracted rom zip file.
3. Turn off and unplug your phone.
4. Click on Download in SP Flash, then plug in your phone.
5. Upon completion, boot directly to recovery by holding volume up and power until the BLU logo appears.
6. Do a factory reset with a Wipe.
7. You can skip the next part.
Click to expand...
Click to collapse
Now, you need to flash TWRP to your phone.
1. Go to this thread. I know, it's Lineage OS. The ROM you decide to flash does not matter. The recovery works for all ROMs.
2. Download SP Flash Tools if you have not already.
3. Flash the recovery to your phone with SP Flash Tools.
Click to expand...
Click to collapse
Now, you need to copy some files from your phone to your computer.
1. Boot into TWRP.
2. Under mount, enable system.
3. Under the Advanced tab, open File Manageer.
4. Copy the following folders to a folder accessible to your PC. I recommend a USB drive (/usbotg/) or the external sd card (/external_sd/).
/system/etc/firmware
/system/etc/mddb
5. Copy those folders to your PC.
Click to expand...
Click to collapse
Next, you must select your custom ROM of choice.
Lineage OS 14.1
AOSP Extended 4.6
Resurrection Remix 5.8.5
Viper OS 3.1.1 (My current ROM of choice)
Cr Droid 3.8.4
Download your ROM of choice and if you are on the following devices, download the patch as well.
BLU Vivo 5, Condor A55 slim, and Gionee s6
Click to expand...
Click to collapse
If on the BLU Vivo 5, Condor A55 slim, and Gionee s6, you open the PATCH zip file and delete the following folders.
/system/etc/firmware
and
/system/etc/mddb
Then what you do is you copy the firmware and mddb folders from your phone into the patch file, taking the place of the folders you just deleted.
Click to expand...
Click to collapse
If on the BLU Vivo 5r, Condor A8, or Gionee s6s, you open the ROM zip and delete the following folders.
/system/etc/firmware
and
/system/etc/mddb.
Then what you do is you copy the firmware and mddb folders that you copied from your phone into the patch (taking the place of the folders you just deleted).
Click to expand...
Click to collapse
Lastly, you copy the rom and patch (if applicable) files to your phone.
Then you flash through TWRP. Always make a backup before flashing anything.
Enjoy your new ROM.
I personally recommend you download the latest Magisk and Gapps micro packages and flash them too.
Thanks for this guide. I will try to get the Marshmallow firmware and upload for making the process faster.
Letrix said:
Thanks for this guide. I will try to get the Marshmallow firmware and upload for making the process faster.
Click to expand...
Click to collapse
You're welcome. Did you successfully flash the rom?
llamasking said:
You're welcome. Did you successfully flash the rom?
Click to expand...
Click to collapse
I couldn't manage to create an independent ROM of Lollipop.
Letrix said:
I couldn't manage to create an independent ROM of Lollipop.
Click to expand...
Click to collapse
What do you mean?
Is there a reason this will not work with Fastboot?
Okay, so it looks as if Fastboot is disabled on my device. I went into the Stock Rom, and I found there is a switch on the Stock Rom that turns Fastboot on and off. It says: Allow Oem Unlock.
I've heard of some folks bricking their Phones this way by flipping this switch in the stock rom. Is that true?
My choices seem to be:
1. Use SP Flash Tool to Flash TWRP. Then TWRP to load AOSP Extanded, or Lineage.
2. attempt to use that switch to see if it will let me do a fastboot oem unlock.
I'd like to try the second, but I want to know if thats a land mine to a bricked Phone if I flip the switch to allow OEM Unlock of the bootloader.
If on Android 6, use SP Flash.
If on 5, use SP flash to repair rom, upgrade to 6. Flash TWRP
Updated today. You can now upgrade directly to Marshmallow with TWRP installed using SP Flash thanks to onasre. Skips OTA entirely.
Redmi K20 Pro
[Raphael]
WARNING: Before attempting to root your device, do note that by unlocking your bootloader and modifying your device with root, ROMs, etc... you are NOT risking voiding your warranty! I am NOT responsible for what you do to your device either, so follow these instructions at your own risk. Make sure you know what you're doing, it's best to understand the process rather than just copy and paste commands and such.
Drivers
Mi Flash
Minimal ADB and Fastboot
Unlock Bootloader
Unlock Bootloader
Unlock here
*AMD Ryzen System has a issues in Unlocking Bootloader try another PC (Intel System)
TWRP Recovery
TWRP
TWRP auto install
Unofficial TWRP 3.3.1 Recovery - RU and Eng
Unofficial TWRP 3.3.1 Recovery @nikk3d - Multilingual
Unofficial Pitch Black Recovery @nikk3d
OrangeFox Recovery Official R10
TWRP Recovery for Android Q
/ Installation
Root
Magisk Stable
Magisk Manager
Firmwares
China MIUI 11
9.9.9
9.9.6-9.9.9
9.10.8
11.0.2.0
11.0.3.0
11.0.1.0.
11.0.4.0
11.0.5.0
9.12.27
Global Stable
10.3.3.0 Fastboot
10.3.3.0 Recovery
Global Beta
China
V10.3.6.0.PFKCNXM Fastboot
V10.3.7.0.PFKCNXM Recovery
V10.3.7.0PFKCNXM Fastboot
V10.3.8.0.PFKCNXM Recovery
V10.3.8.0PFKCNXM Fastboot
V10.3.9.0PFKCNXM Recovery
V10.3.10.0PFKCNXM Recovery
V10.3.110.PFKCNXM Recovery
V10.3.12.0PFKCNXM Recovery
V10.3.14.0PFKCNXM Recovery
V10.3.16.0PFKCNXM Recovery
V10.4.4.0 RecoveryQFKCNXM
V10.4.4.6 RecoveryQFKCNXM
OTA
10.3.10.0 to 10.3.11.0
10.3.8.0 to 10.3.10.0
10.3.7.0 to 10.3.8.0
10.3.9.0 to 10.3.10.0
Beta
9.6.11
9.6.20
9.7.4
9.8.12
9.8.21
9.9.3
India
Stable Firmwares
10.3.3.0 Fastboot
10.3.5.0
10.4.7.0 Android Q
10.4.8.0 Android Q
Beta
Global
EU
9.6.13
9.6.20
10.3.9.0
10.3.10.0
10.3.11.0
9.6.27
[URL="https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv10/xiaomi.eu_multi_HMK20ProMI9TPro_V10.3.12.0.PFKCNXM_v10-9.zip/download"]10.3.12.0[/URL]
9.7.4
10.3.14.0
10.3.15.0
9.7.11
9.7.18
9.7.19
10.3.16
9.7.27
9.8.1
EU Android Q 9.8.8
9.8.12
9.8.15
9.8.22
10.3.17
EU Android Q 9.8.29
EU Android Q 10.4.4.0
9.9.3
9.9.6
10.3.30
EU Android Q 10.4.6.0
MIUI 11 9.9.26
MIUI 11 9.10.10
MIUI 11 11.0.2.0
MIUI 11 9.10.24
MIUI 11 9.11.7
MIUI 11 9.11.14
MIUI 11 9.11.21
MIUI 11 9.11.22
MIUI 11 9.11.28
MIUI 11 9.12.5
MIUI 11 9.12.12
MIUI 11 9.12.27
MIUI 11 20.1.16
Global EEA
10.3.1.0 PFKEUXM Fastboot
10.3.1.0 PFKEUXM Recovery
10.3.3.0 Recovery
Mi-Room
9.6.20
9.6.27
9.7.4
9.8.1
9.8.22 Android Q
9.8.29 Android Q
9.9.6 Android Q
MiuiMix
10.3.17.0
Mi-Italia
10.3.16.0
MIUI MS
9.7.18.9
9.7.25.9
9.8.1
Android Q 9.8.8
*Back up everything and Flash via TWRP Recovery
*For Raphael only (China ROM)
9.8.8 Q
9.8.8-9.8.29 Q
9.8.29 Q
MIUI 11 9.9.24
MIUI 11 9.9.25
[URL="https://hugeota.d.miui.com/9.9.26/miui_RAPHAEL_9.9.26_c74ffeeec0_10.0.zip"]MIUI 11 9.9.26[/URL]
Revolution OS
9.9.7
Google service error flash this
9.9.21 Q
9.9.21 Pie
Android Q [Unlocked Bootloader]
Beta 1
TWRP RESET Password
If you forget the password go to TWRP Recovery and Flash.
Removing Bloatwares in Locked/Unlocked Bootloader
-Enable Developer Options and click USB debugging
1.Open and click run as administrator XiaomiADBfastboottools.exe
2.Click Debloater
3.Check your phone (Allow)
4.Select the system apps that want you to delete
5. Wait for the process....
6.After finished.. click the Reboot into System
The Ultimate Guide for Redmi K20 Pro [Raphael]
Fake Global ROM to Chinese ROM to Global ROM/EU/Mi-Room
ATTENTION!*All that you will do with the phone is guided by this guide - it lies in the area of your personal responsibility only.*Neither I nor other members of the forum, not the administration of the forum are responsible.*
If you do not understand something and the written guide below - contact the LS to knowledgeable colleagues, as I did!*Hide created for the Chinese version of the phone K20 Pro - Global ROM.*(for India it will not work!)*
I will explain in stages what to do, giving my comments in my simple language: what?*What for?*Why?*Don't be scared that there are a lot of points - I tried to chew everything up.
So what do we have?*
• K20 Pro - Global ROM (Installed by the Chinese firmware, with no updates, poor translation, with not working Gpay)*
• You must create an official mi account and link the device to it.*
What do we need?:*
• Installation Recovery - Orange fox (Advanced replacement of standard Recovery, and installation of any firmware) - Wildly necessary thing!*
• Installing the firmware MI Room 9.7.4*
• Proper operation of the GPAY through the patch*
Introduction)*
So, you got a phone from China.*What do you have in your hands?*This is the device on which the Chinese put the left firmware and at the same time did not unlock the bootloader officially - which is not compatible with the transition to any, really good firmware.*
Before we begin - the most important thing!*(further quote from the forum):
ATTENTION!*CHINESE VERSION REDMI K20 PRO CAN BE BLOCKED ONLY ON THE CHINESE FIRMWARE!*Before carrying out any operation, read the materials that are referenced in the header themes, check Search by topic, and if not found the answer to your question, or do not understand something, ask more experienced users.*
Do you understand?*Now read again 20 and memorize this phrase!*
INSTALLATION OF THE CHINESE OFFICIAL FIRMWARE AND LOCKER DOWNLOAD AND UNLOCK!*
What for?*Your phone needs to be unlocked officially.*To do this, you must put the official firmware and file for unlocking officially.*
What is needed (all in the header):*
•Firmware file - *10.3.6.0 China Fastboot
• Program MiFlash 2018.11.15.0 (we need administrator rights) - a program to install Fastboot-type firmware and lock the phone loader.*
• Driver for computer - ADB Driver Lite
• Program - miflash_unlock*
• Phone*
• Type C Cable*
1) Download all of the above and check that everything downloaded*in the right “size”.*
2) Install MiFlash 2018.11.15.0*on the C drive:
3) Go to MiFlash 2018.11.15.0 - it will offer to install the drivers.*Do not hesitate to install everything - exit the program!*
4) Install ADB Driver Lite (by default it is set by MiFlash but will not be worse if you additionally install the latest driver from the header)
5) - CORRECTLY unpacking the firmware 10.3.6.0 China Fastboot!*By default, you download it with the extension .tgz!*The file you downloaded will be called raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn_ed862b8182.tgz*
- Unzip this .tgz file and get a file with the .tar extension.*The full name will be - raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn_ed862b8182.tar.*
- Unzip this .tar file and get a folder named raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn.*Here we will work with this folder in the future!*You need to move it to drive C:!*It is important!*
6) Switch the phone to debug mode via USB.*(I think there will be no problems here)
7) Transfer the phone to FASTBOOT mode.*Turn off the device.*Clamp the power button + volume rocker down.*If there is a hare and the inscription Fastboot then everything is OK!*
8) In MiFlash, press the Select button, specify the path to the folder with the firmware raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn and click ok.*
9) Something like this should appear in the line:*С: \ raphael_images_V10.3.6.0.PFKCNXM_20190516.0000.00_9.0_cn
10) Put a clean all and lock checkbox at the bottom.*This parameter means that the*
phone will be erased while all data is erased, and the bootloader is locked.*(only for the Chinese version of the phone)*
11) We connect the phone (in fastboot mode) to the computer through the official drawstring.*And without any USB hubs and adapters!*
12) Press the Refresh button.
13) If everything is correct then a line should appear with the id of the phone and the status ready.*
14) So, the phone is recognized.*The path to the folder with the firmware is specified.*Galka clean all and lock costs.*Press the flash button.*
15) The phone starts to sew!*Do not unplug the power cord!*don't touch anything at all.*Do not breathe!*The firmware time is about 10 minutes.*
16) At the end of the firmware, complete will appear in the line with the execution status and the phone will restart (up to 10 minutes) to the initial welcome screen.*Disconnect the phone.*
17) Hooray you flashed to the Chinese firmware and officially blocked the phone.*Let's start the activation and application for unlocking.
18) The first thing that will meet you is the screen in Chinese.*With two button in Chinese.*Push first you are asked to enter something ... This is the password from your mi account.*We enter.*
19) Tap on the second button connect to the Wi-Fi or skip.*
20) Choose the English language.*Customize your phone.*
21) Transfer the phone to the developer mode.*In the settings of the developer, we go into the unlock status (I don’t remember exactly how to speak English).*We see the closed lock, below we see the button.*Click on it!*And we will register the phone for the official unlock (Wi-Fi should be turned off and mobile networks on).*
22) Next, go to the mi account and check that your mobile phone is tied.*Are you convinced?*I recommend to look at the corresponding topic on the forum with the video.
23) On the PC, run miflash_unlock.*Log in to your mi account.*The phone is transferred to the Fastboot mode (point 7) and connected to the computer.*Press the unlock button.*At the same time, we confirm a bunch of times that we are sure that we want to do this.*All your data will be destroyed.*
24) The PC starts to unlock and at some point gives a message that the unlock failed and should be tried again after 168 hours.
25) Congratulations, you activated the counter before unlocking.*You walk with the phone 7 days on the Chinese firmware.*Is it hard?*Well no.*You can take the apk with Google services from the page on this forum and install what you need.*
26) It's been 168 hours, and you're ready to unlock.*
27) But before you do ... Update your phone over the air to the latest version - nowhere on the forum it is not written (I have not seen) but this is important.*I will explain later why!*Remember this item.*
28) Start and repeat paragraph 23. And lo and behold!*The unlock process has begun.*And at the end there is an inscription that the phone is unlocked.
29) Now, when you boot your phone, you should see Unlocked.*Check out what it is!*
30) Configure the phone again.*Turn on USB debugging mode.*
31) Further, in my opinion the most dreary, because the forum has a lot of conflicting information.*I will tell you how I did.*But before continuing, I can say that since you have already received unlock, it is almost impossible to turn the phone around (but everything is possible)*
32) So, download three things:*
- TWRP-3.3.1*
- OrangeFox R10.0 Recovery*
- MI Room 9.7.4 firmware
33) Everything that you downloaded in the zip archives.
34) Unzip -TWRP-3.3.1 to drive C. Transfer the phone to Fastboot (item 7) and connect it to the computer.*We find in the unpacked folder TWRP file with the extension .bat.*in different versions of TWRP called differently.*I called Flash_twrp.bat*
35) And before*proceeding, I’ll*remind you about clause 27).*The fact is that I could not install TWRP without updating over the air.*Therefore, you must first install the update.*And on the firmware 10.3.6.0 China Fastboot.*- It will not work to put TWRP and you will have to do a lot again*
36) Start and get the menu in my Russian language, where we select the auto installation (1).*After a couple of seconds, your phone should reboot into TWRP recovery.*There we choose the language if asked.*
37) And
so, we are in the main menu of TWRP.*We need to take a series of actions*(in a strict order)
38) Go to the Wipe point and select FORMAT DATA -> svayp -> type yes.*The formatting process takes a couple of seconds.*What does this item do in my understanding?*He decrypts the data on the phone, which is necessary to throw on the phone firmware and Orange fox.*
39) Exit the main menu by clicking REBOOT Recovery.*The phone should reboot into the main menu again.*And on the PC, it should be defined as a phone with Internal storage.*Go to the Internal storage on the PC.*See the TWRP folder?*If yes, then everything is OK!*
40) On the phone, go to the Wipe point and select Advanced wipe -> svayp -> select all the items*except System and OTG* svayp
41) Exit the main menu, press REBOOT -> Recovery.*The phone should reboot into the main menu again.*
42) On the PC, go to the phone -> Internal storage and next to the TWRP folder, throw the downloaded OrangeFox R10.0 recovery directly into the zip archive.*
43) On the phone, go to the Install item and see our Orange Fox.*Choose it.*AND THERE IS THE MOST IMPORTANT!*He will ask you to install two checkboxes before installation: one of them Verification of the ZIP signature (in English) and so this checkbox must be removed, otherwise the error will be.*We start the installation.*Your phone must reboot into Orange FOX.*
44) So what is Orange Fox?*This same TWRP is simply much more convenient and stable.*
45) On the PC, go to the phone -> Internal storage and next to the TWRP folder, throw the downloaded firmware to the worlds.
46) In Orange Fox, select this firmware, also remove the checkmark ZIP signature check (in English).*And start the process of installing the firmware.*
47) Hooray you got the best, in my opinion, firmware)*
48) Disconnect from the computer.*Customize your phone.*
49) Installing a patch for Gpay is easy.*Straight from the phone, download the patch file.*
50) Put the phone in orange fox recovery mode.*Turn off the device.*We press the power button + volume rocker UP (not to be confused with the power button + volume rocker DOWN for Fastboot boot mode)*
51) In the Downloads folder we see our patch and install (also remove the Check Signature ZIP checkbox).*
52) Congratulations!
Thanks to
helpbabay911
Mysttorent
Viper4Android + DDPlus and Google Pay Fix for Redmi K20 Pro
Google Pay Fix
•TWRP Recovery from our site
•Do not install the patch simultaneously with other patches or firmware.
•Install the patch only on top of the installed firmware. If you have made a date wipe, first launch the firmware, perform the initial setup, and then install the patch itself.
•Before installing the patch, make sure that the Data section is mounted (usually it is mounted by default on all TWRPs).
Download
*Credits to Mi-Room RU
Viper4android + DDPlus =
1.Install Audio Modification Library (AML) and Audio Compatible Patch (ACP) via Magisk Repo and reboot.
2.Install DDPlus via Magisk and reboot.
3.Install Viper4Android via Magisk and reboot. (materialized).
4.selinux changer (choose permissive if not working in enforcing).
5.Profiles
Profiles with IRS 1
Profiles with IRS 2
Profiles
DDPlus
AML (You can download from Magisk Repo)
ACP (You can download from Magisk Repo)
Viper4android (You can download from Magisk Repo)
Reserved 3
Reserved 4
So EU 9.5.13 is the global ROM for K20 Pro?
I'm using China ROM, I wanna switch to Global, can I just flash it?
Thank you
Thank you for your amazing work!
khoaitaychienvn said:
So EU 9.5.13 is the global ROM for K20 Pro?
I'm using China ROM, I wanna switch to Global, can I just flash it?
Thank you
Click to expand...
Click to collapse
Yes, you can flash it with TWRP. That's the multilanguage rom with Google Play preinstalled and without the bloatware of the Chinese version.
madsponge26 said:
Reserved 1
Click to expand...
Click to collapse
Hi. I really appreciate the post.. just one question though? What are the firmwares for? Coz if I am not mistaken, to be able to install twrp and root, all I need is to unlock the bootloader then flash the twrp.img. Please enlighten me.. thank you..
---------- Post added at 07:35 PM ---------- Previous post was at 07:33 PM ----------
Also, will bootloader unlocking and installing twrp wipe everything I have in my internal storage?
melmarPH said:
Hi. I really appreciate the post.. just one question though? What are the firmwares for? Coz if I am not mistaken, to be able to install twrp and root, all I need is to unlock the bootloader then flash the twrp.img. Please enlighten me.. thank you..
---------- Post added at 07:35 PM ---------- Previous post was at 07:33 PM ----------
Also, will bootloader unlocking and installing twrp wipe everything I have in my internal storage?
Click to expand...
Click to collapse
The firmwares are the stock roms, should you need to recover the phone. The fastboot ROM is the absolute failsafe and flashes almost all partitions. This can be updated using scripts within the package or using the Mi flash tool. The recovery roms will just update the system partition and flashed using recovery, either stock or TWRP or any other recovery.
Installing TWRP won't touch anything on the phone except the recovery partition. However bootloader unlocking will perform a factory reset. In theory the internal storage should remain untouched, but best to back it up.
madsponge26 said:
Reserved 4
Click to expand...
Click to collapse
Hi, Please update the thread, here's a fastboot link for Firmware 10.3.7.0
https://bigota.d.miui.com/V10.3.7.0...FKCNXM_20190528.0000.00_9.0_cn_8b5bfd6d56.tgz
and 10.3.8.0
http://bigota.d.miui.com/V10.3.8.0....FKCNXM_20190601.0000.00_9.0_cn_beb2b2a432.tgz
Robbo.5000 said:
The firmwares are the stock roms, should you need to recover the phone. The fastboot ROM is the absolute failsafe and flashes almost all partitions. This can be updated using scripts within the package or using the Mi flash tool. The recovery roms will just update the system partition and flashed using recovery, either stock or TWRP or any other recovery.
Installing TWRP won't touch anything on the phone except the recovery partition. However bootloader unlocking will perform a factory reset. In theory the internal storage should remain untouched, but best to back it up.
Click to expand...
Click to collapse
That's crystal clear. Thank you so much..
khoaitaychienvn said:
So EU 9.5.13 is the global ROM for K20 Pro?
I'm using China ROM, I wanna switch to Global, can I just flash it?
Thank you
Click to expand...
Click to collapse
I would not suggest to flash it right now as a daily driver, here is a review for xiaomi eu rom.
https://www.youtube.com/watch?v=mTi8nYMJRx4
sorry can i ask 9.6.11 is global beta rom or china rom?
What is the wait time to unlock the bootloader?
bretzelpopo said:
What is the wait time to unlock the bootloader?
Click to expand...
Click to collapse
7 days
knight06 said:
sorry can i ask 9.6.11 is global beta rom or china rom?
Click to expand...
Click to collapse
I was with the same doubt. is that rom really a Beta version of the global rom?
knight06 said:
sorry can i ask 9.6.11 is global beta rom or china rom?
Click to expand...
Click to collapse
rafa_martineiz said:
I was with the same doubt. is that rom really a Beta version of the global rom?
Click to expand...
Click to collapse
9.6.11 is China Beta
9.6.13 is EU version which is from Xiaomi.EU . Unofficial global version based on China ROM that removes all chinese bloat and adds more languages.
New Links!
10.3.6.0 for Recovery
http://bigota.d.miui.com/V10.3.6.0.PFKCNXM/miui_RAPHAEL_V10.3.6.0.PFKCNXM_e679907a50_9.0.zip
10.3.9.0 for Recovery
http://bigota.d.miui.com/V10.3.9.0.PFKCNXM/miui_RAPHAEL_V10.3.9.0.PFKCNXM_bd915c4259_9.0.zip
MIUI 10 10.3.9.0 Android Pie 9.0 is up!
Changelog
MIUI 10 EU 10.3.9.0 Android Pie 9.0 is up!
Changelog
Hello everyone, firstly, i'm not a dev. I'm just someone who really enjoying tweaking phones, Windows... So, in this post i'll show you how to install Magisk and GSI rom. Most of resources i took from 4PDA forum. Redmi 8A section on their forum is very active. My phone is Chinese variant (4-64), using MIUI 11 Xiaomi.eu rom / Havoc OS 3.1 GSI
Backup your data before doing anything!!!
Code:
#include <std/disclaimer.h>
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
#1. Install TWRP
- First, you must unlock phone with Mi Unlock tool. Which can be download from http://en.miui.com/unlock/download_en.html The unlocking process normally will take about 14 days.
- After unlock the phone, flash twrp from @milankragujevic thread. https://forum.xda-developers.com/xiaomi-redmi-8a/help/twrp-redmi-8a-olivelite-global-miui-10-t4006827
Now you'll have a working twrp.
#2 Install Magisk
1. Download lastest Magisk Flashable Zip from @topjohnwu thread: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
2. Download patcher tool (thanks to @YaAlex3): http://files.yaalex.tk/patcher.7z
3. Reboot the phone to TWRP, on the computer, open adb and type command:
Code:
adb shell dd if=/dev/block/by-name/boot of=/sdcard/boot.img
This'll pull your current boot image to sdcard
4. Unpack patcher.7z, copy boot.img to this folder. Open boot-patch.exe.
5. You'll have new_boot.img, flash this to boot partition using TWRP.
6. Flash Magisk you download at step 1
Caution: If bootloop happens, you may have to WIPE DATA.
7. Now you should have Magisk installed and working
If you can't patch the boot image file for some reasons, you can download here, choose the correct version, unzip and flash. If bootloop happens, wipe data in TWRP.
GLOBAL 11.0.3.0. PCPMIXM_20191219: Here
GLOBAL 11.0.1.0. PCPMIXM_20191121: Here
INDIA 11.0.3.0 .PCPINXM_20191119: Here
INDIA 11.0.1.0 .PCPINXM_20191105: Here
XIAOMI.EU 11.0.4.0 .PCPCNXM: Here
XIAOMI.EU 11.0.7.0. PCPCNXM: Here
#3 Install GSI Roms
Our phone is arm32binder64, so we'll download A64 A/B GSI rom to flash. In github of @phhusson, there is a list of GSI roms: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-%28GSI%29-list
After you choose a rom, we'll follow these steps to flash a GSI rom:
1. Unzip the rom you choose and you'll have image file (.img)
2. Copy to your phone, Flash Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip to stay encrypted (optional, you can backup the /data but you can't setup password)
3. Make a factory reset and flash your unpacked image to system partition using TWRP or Orange Fox.
4. If you like Gapps, you can download Bitgapps or Opengapps (Arm) and flash (optional). But you must resize system partition first (advanced wipe -> repair or change file system -> resize system partition)
5. Flash Permissiver_v5.zip and Certification+Patch.zip
6. Go to Reboot and reboot to bootloader. Flash vbmeta using command:
Code:
fastboot flash vbmeta vbmeta.img
fastboot reboot
Otherwise, you can flash vbmeta.img directly to vbmeta partition, no difference though.
7. Now your phone should be reboot.
After trying some GSI rom like Pixel, RR, Lineage OS, AOSP... There're some bug like:
- D2TW is present in phhusson setting but not working. Use Magisk module: magisk_force-d2tw.zip to fix
- Auto brightness
- Brightness Slider: Can be fixed using adb:
Code:
adb shell su -c setprop persist.sys.qcom-brightness $(cat /sys/class/leds/lcd-backlight/max_brightness)
or using Terminal:
Code:
su
setprop persist.sys.qcom-brightness $(cat /sys/class/leds/lcd-backlight/max_brightness)
- Camera Recording: You can use 3rd camera apps if bug occurs.
- When set password (pattern, etc...), next time you enter password, password will be wrong. (if you flash disable_dm... above), temp fix: boot to TWRP and remove some files in /data/system then reboot, password will be removed
Code:
locksettings.db-wal
locksettings.db-shm
locksettings.db
- Fix auto brightness, power consumtion... : copy treble-overlay-xiaomi-redmi8a.apk to /system/overlay then set permission 644, reboot.
- No Mac, IP address? Install the correct boot image.
- Some rom specific bugs...
UPDATE: On Havoc OS 3.1 from ExpressLuke, all the bugs are fixed, if any still present, just follow instructions above.
That is. I don't know why our device development is so slow after 2 months... So i decided to write this post. My main language is Vietnamese so if there's a grammar error, feel free to comment below. Thanks.
I get an error
C:\aaa\patcher>boot-patch.exe
Developer: YaAlex (yaalex.tk)
Thanks to:
acdev for zimage packer concept
And_PDA for AndImgTool
Igor Pavlov for 7zip
topjohnwu for magisk and all it's parts used here
Report any issues to t.me/yaalex3
UPDATER: Latest version is: 0.4
UPDATER: Current version is: 0.4
UPDATER: You have latest version!
INFO: Unpacking boot image....
ERROR: Can't find file: kernel.img
Press any key to continue . . .
Traceback (most recent call last):
File "C:\aaa\patcher\boot-patch.py", line 244, in <module>
File "C:\aaa\patcher\boot-patch.py", line 68, in die
NameError: global name 'quit' is not defined
Click to expand...
Click to collapse
arana1 said:
I get an error
Click to expand...
Click to collapse
The boot image you pulled from your phone, is it 64mb? Did you follow the instruction correctly? I have tried patching boot image again and it worked fine.
arana1 said:
I get an error
Click to expand...
Click to collapse
I am fixing patched boot.img from different firmware on 4pd, but if you want I will do it for you. Just take a screenshot of the phone settings where the firmware version is indicated and post your boot.img
Отправлено с моего Redmi 8A через Tapatalk
dmitrypershin2015 said:
I am fixing patched boot.img from different firmware on 4pd, but if you want I will do it for you. Just take a screenshot of the phone settings where the firmware version is indicated and post your boot.img
Отправлено с моего Redmi 8A через Tapatalk
Click to expand...
Click to collapse
Can i add your patched boot.img from your post on 4PDA to my thread? Thanks.
Ga_hap_la_chanh said:
Can i add your patched boot.img from your post on 4PDA to my thread? Thanks.
Click to expand...
Click to collapse
of course yes
Ga_hap_la_chanh said:
Hello everyone, firstly, i'm not a dev. I'm just someone who really enjoying tweaking phones, Windows... So, in this post i'll show you how to install Magisk and GSI rom. Most of resources i took from 4PDA forum. Redmi 8A section on their forum is very active. My phone is Chinese variant (4-64), using MIUI 11 Xiaomi.eu rom.
Backup your data before doing anything!!!
Code:
#include <std/disclaimer.h>
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*/
#1. Install TWRP
- First, you must unlock phone with Mi Unlock tool. Which can be download from http://en.miui.com/unlock/download_en.html The unlocking process normally will take about 14 days.
- After unlock the phone, flash twrp from @milankragujevic thread. https://forum.xda-developers.com/xiaomi-redmi-8a/help/twrp-redmi-8a-olivelite-global-miui-10-t4006827
Now you'll have a working twrp.
#2 Install Magisk
1. Download lastest Magisk Flashable Zip from @topjohnwu thread: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
2. Download patcher tool (thanks to @YaAlex3): http://files.yaalex.tk/patcher.7z
3. Reboot the phone to TWRP, on the computer, open adb and type command:
Code:
adb shell dd if=/dev/block/by-name/boot of=/sdcard/boot.img
This'll pull your current boot image to sdcard
4. Unpack patcher.7z, copy boot.img to this folder. Open boot-patch.exe.
5. You'll have new_boot.img, flash this to boot partition using TWRP.
6. Flash Magisk you download at step 1
Caution: If bootloop happens, you may have to WIPE DATA.
7. Now you should have Magisk installed and working
If you can't patch the boot image file for some reasons, you can download here, choose the correct version, unzip and flash. If bootloop happens, wipe data in TWRP.
GLOBAL 11.0.3.0. PCPMIXM_20191219: Here
GLOBAL 11.0.1.0. PCPMIXM_20191121: Here
INDIA 11.0.3.0 .PCPINXM_20191119: Here
INDIA 11.0.1.0 .PCPINXM_20191105: Here
XIAOMI.EU 11.0.4.0 .PCPCNXM: Here
#3 Install GSI Roms
Our phone is arm32binder64, so we'll download A64 A/B GSI rom to flash. In github of @phhusson, there is a list of GSI roms: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-%28GSI%29-list
After you choose a rom, we'll follow these steps to flash a GSI rom:
1. Unzip the rom you choose and you'll have image file (.img)
2. Copy to your phone, Flash Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip to stay encrypted (optional)
3. Make a factory reset and flash your unpacked image to system partition using TWRP.
4. If you like Gapps, you can download Bitgapps or Opengapps (Arm) and flash (optional)
5. Flash Permissiver_v4.zip and Certification+Patch.zip
6. Go to Reboot and reboot to bootloader. Flash vbmeta using command:
Code:
fastboot flash vbmeta vbmeta.img
fastboot reboot
7. Now your phone should be reboot.
After trying some GSI rom like Pixel, RR, Lineage OS, AOSP... There're some bug like:
- Auto brightness
- Brightness Slider: Can be fixed using adb:
Code:
adb shell su -c setprop persist.sys.qcom-brightness $(cat /sys/class/leds/lcd-backlight/max_brightness)
or using Terminal:
Code:
su
setprop persist.sys.qcom-brightness $(cat /sys/class/leds/lcd-backlight/max_brightness)
- Camera Recording: You can use 3rd camera apps if bug occurs.
- When set password (pattern, etc...), next time you enter password, password will be wrong. (some case), temp fix: boot to TWRP and remove some files in /data/system then reboot, password will be removed
Code:
locksettings.db-wal
locksettings.db-shm
locksettings.db
- Some rom specific bugs...
That is. I don't know why our device development is so slow after 2 months... So i decided to write this post. My main language is Vietnamese so if there's a grammar error, feel free to comment below. Thanks.
Click to expand...
Click to collapse
Thanks!
Edit: was having problems at first and ended up in a bootloop but eventually got Magisk and Root working finally. Thanks a lot for your help!
Hello everyone, I send you my best regards.
I comment. -
I have a global 8th redmi (olivelite), I unlocked the bootloader and continued to install the unofficial TWRP, but there is a problem, my touch screen does not work.
That's why I tried Orangefox and the touch panel worked without problems, I could erase everything except the micro SD, and continued to install Mi Globe 11.0.7, the most recent.
But at the time of finishing and restarting, restart only in recovery, no more, again and again.
Try once installed the rom my globe, flash twrp and force start by fastboor reboot, but it didn't work either.
Also install by fastboot, boot.img of the rom eu, of the global and also the patched by magysk and it didn't work either.
I am NOT looking for root, I am NOT looking for magysk, just install rom MY GLOBE clean, as in all my xiaomis, then I ask.
Has anyone been able to install Xiaomi.eu successfully on your device? With orangefox what was your process? With TWRP and the OTG, do you think I can start?
I would greatly appreciate your response. ):
marcachas said:
Hello everyone, I send you my best regards.
I comment. -
I have a global 8th redmi (olivelite), I unlocked the bootloader and continued to install the unofficial TWRP, but there is a problem, my touch screen does not work.
That's why I tried Orangefox and the touch panel worked without problems, I could erase everything except the micro SD, and continued to install Mi Globe 11.0.7, the most recent.
But at the time of finishing and restarting, restart only in recovery, no more, again and again.
Try once installed the rom my globe, flash twrp and force start by fastboor reboot, but it didn't work either.
Also install by fastboot, boot.img of the rom eu, of the global and also the patched by magysk and it didn't work either.
I am NOT looking for root, I am NOT looking for magysk, just install rom MY GLOBE clean, as in all my xiaomis, then I ask.
Has anyone been able to install Xiaomi.eu successfully on your device? With orangefox what was your process? With TWRP and the OTG, do you think I can start?
I would greatly appreciate your response. ):
Click to expand...
Click to collapse
Hi, have you try to wipe yet? Or try to wipe internal storage? I don't use miglobe but i'm using xiaomi.eu rom and this rom works great for me. And don't flash boot.img because each version is different.
Ga_hap_la_chanh said:
Hi, have you try to wipe yet? Or try to wipe internal storage? I don't use miglobe but i'm using xiaomi.eu rom and this rom works great for me. And don't flash boot.img because each version is different.
Click to expand...
Click to collapse
Miui 11.0.7 is not global, it apparently flashed either Chinese, or xiaomi.eu .
I posted the patched boot.img for xiaomi.ue 11.0.7 on 4pda
Sorry for my bad english. I am not literate and in Russian )))
dmitrypershin2015 said:
Miui 11.0.7 is not global, it apparently flashed either Chinese, or xiaomi.eu .
I posted the patched boot.img for xiaomi.ue 11.0.7 on 4pda
Sorry for my bad english. I am not literate and in Russian )))
Click to expand...
Click to collapse
He wrote mi-globe which is a rom modified from xiaomi.eu rom. I haven't updated the post yet. By the way i feel somehow MIUI is bad at wifi compare to GSIs. But GSIs have many bug, sometimes they won't boot at all. I noticed that you installed havoc os before, does it have double tab to wake device?
Ga_hap_la_chanh said:
He wrote mi-globe which is a rom modified from xiaomi.eu rom. I haven't updated the post yet. By the way i feel somehow MIUI is bad at wifi compare to GSIs. But GSIs have many bug, sometimes they won't boot at all. I noticed that you installed havoc os before, does it have double tab to wake device?
Click to expand...
Click to collapse
I have all the gsi loaded which I tried. Double tap does not work
Sorry for my bad english. I am not literate and in Russian )))
Just this
Sorry for my bad english. I am not literate and in Russian )))
dmitrypershin2015 said:
Just thisView attachment 4931295
Sorry for my bad english. I am not literate and in Russian )))
Click to expand...
Click to collapse
Yeah, the same as mine. I'm just waiting for a device specific rom so that we have a more stable rom, full-features, not miui. I hate the thing that after update i have to re-patch boot image to install magisk, if bootloop then wipe all. That's inconvenient.
Ga_hap_la_chanh said:
Yeah, the same as mine. I'm just waiting for a device specific rom so that we have a more stable rom, full-features, not miui. I hate the thing that after update i have to re-patch boot image to install magisk, if bootloop then wipe all. That's inconvenient.
Click to expand...
Click to collapse
Only check for rom updates
Sorry for my bad english. I am not literate and in Russian )))
I've been using havoc os 10 for the past day and so far I really like it. MIUI is really sluggish compared to havoc. So far I have not really noticed any bugs besides the brightness which was easily fixed using the command in the original post and not being able to apply a screenlock.
ways2 said:
I've been using havoc os 10 for the past day and so far I really like it. MIUI is really sluggish compared to havoc. So far I have not really noticed any bugs besides the brightness which was easily fixed using the command in the original post and not being able to apply a screenlock.
Click to expand...
Click to collapse
I have a dialer for havoc os with recording calls (but it doesn’t work very loudly) and a patch for increasing the volume in the headphones + libraries from the Samsung. I can give
Sorry for my bad english. I am not literate and in Russian )))
View attachment 4931461
Ga_hap_la_chanh said:
Hi, have you try to wipe yet? Or try to wipe internal storage? I don't use miglobe but i'm using xiaomi.eu rom and this rom works great for me. And don't flash boot.img because each version is different.
Click to expand...
Click to collapse
Excellent, thanks for your reply.
Could you be a little more specific about the steps you took?
Formatting before installing the ROM, or after?
For example, I followed these steps.
Unlock the bootloader.
Fastboot, install the vbmeta first (or something like that).
install the Orange fox recovery, then the orangefox zip.
Clean EVERYTHING (dalvik cache, intertnal storage, etc), except SD.
Install MY GLobe ROm Olivelite.
Start in recovery, restart again, without changes, continue to start in recovery, and so, for eternity.
I did not do the formatting, and I do not use TWRP because the touch panel does not work with that, so I only have Orangefox as an alternative, could you try to install the MI Globe ROM please? https://mi-globe.com/miui-firmware-rom-builder-features/41/
Thanks for everything.
dmitrypershin2015 said:
I have a dialer for havoc os with recording calls (but it doesn’t work very loudly) and a patch for increasing the volume in the headphones + libraries from the Samsung. I can give
Sorry for my bad english. I am not literate and in Russian )))
View attachment 4931461
Click to expand...
Click to collapse
Sure, I'll check those out. Go ahead and send them my way
Just received the new update.
Thanks for notification, also just received it.
How to update with unlocked bootloader, TWRP and rooted with Magisk?
Download the hole update zip, flash it in TWRP and immediately Magisk afterwards?
bmwbasti said:
How to update with unlocked bootloader, TWRP and rooted with Magisk?
Download the hole update zip, flash it in TWRP and immediately Magisk afterwards?
Click to expand...
Click to collapse
Backup everything on your phone.
From what I understand; if you flash an OTA zip you'll end up on MIUI without root or TWRP unless, whilst still in TWRP after the zip has flashed, you immediately flash TWRP's image again along with Magisk without rebooting even once so that both persist.
That's if TWRP let's you flash whatever file ends up in /sdcard/downloaded_rom to begin with. Flashing MIUI zips - typically only supported by OrangeFox if I remember correctly. And if I'm right MIUI updater will download the full rom instead of an OTA if it detects a custom recovery.
I'd advise backing up everything before going ahead. If you want OTA your best bet might be to go on your PC and do "fastboot boot twrp.img" instead of "fastboot flash recovery twrp.img" then use the temporary TWRP to install the OTA zip and Magisk zip - that way it'll patch the stock bootloader.
I'd wait for someone with a little more knowledge though. I could be deathly wrong as I've only read this stuff and not updated MIUI with OTA before.
Hello Mi 9T Pro with Global ROM owners!
For someone who have installed V11.0.2.0QFKMIXM update and have ROOT => Can you please share these following two files "/vendor/lib/liboemcrypto.so" and "/vendor/lib64/liboemcrypto.so", thanks!
Micdu70 said:
Hello Mi 9T Pro with Global ROM owners!
For someone who have installed V11.0.2.0QFKMIXM update and have ROOT => Can you please share these following two files "/vendor/lib/liboemcrypto.so" and "/vendor/lib64/liboemcrypto.so", thanks!
Click to expand...
Click to collapse
https://drive.google.com/folderview?id=10zBJh6Ud8cqMykHSfrupENSc8w8C2tOz
The one named with -1 is lib64 version
And one camera bug.
In Spanish (Spain) language selected camera FC in pro mode.
In Spanish (America) all is ok.
here's the download link
https://bigota.d.miui.com/V11.0.2.0.QFKMIXM/miui_RAPHAELGlobal_V11.0.2.0.QFKMIXM_6050442ee4_10.0.zip
r4yv3n said:
https://drive.google.com/folderview?id=10zBJh6Ud8cqMykHSfrupENSc8w8C2tOz
The one named with -1 is lib64 version
And one camera bug.
In Spanish (Spain) language selected camera FC in pro mode.
In Spanish (America) all is ok.
Click to expand...
Click to collapse
Thanks! Can you post a screen of Widevine informations with "DRM Info" app? Thx again.
Any OTA at this time or just full rom?
Found ota file, downloading now
https://bigota.d.miui.com/V11.0.2.0...QFKMIXM-V11.0.2.0.QFKMIXM-a84af52957-10.0.zip
Micdu70 said:
Thanks! Can you post a screen of Widevine informations with "DRM Info" app? Thx again.
Click to expand...
Click to collapse
https://drive.google.com/file/d/10IJ_zGk77vxgeTpbOuR0GY9lhekbivSz/view?usp=drivesdk
?
This is from 11.0.1
I had to return back , stuck in fastboot ?
how much sot here?
I'm on miui 11.0.1 QFKMIXM and i am waiting for a month when 11.0.2 is available, but still now i dont have any new OTA update?? Why
Giangvo200837 said:
I'm on miui 11.0.1 QFKMIXM and i am waiting for a month when 11.0.2 is available, but still now i dont have any new OTA update?? Why
Click to expand...
Click to collapse
I think it's been withdrawn. It never officially came out of beta. They're still trying to fix a few minor Q bugs like battery drain and camera app issues; on top of that the development for MIXM in particular has been a bit behind - probably due to Chinese new year and/or Coronavirus. Though it's possible the MIXM (or Global) branch is compiled outside China; truth be told I have no idea why the Q update has been handled so badly for this particular device channel. The Mi9T Pro's development has been seemingly 'paused' as of late for Global users.
Reminds me a lot of my Redmi 5 Plus. Development was paused for much of the product's lifespan and they never fixed certain bugs on the device; just merged MIUI branch changes. Hopefully the same doesn't happen to the Mi9T Pro. It is a flagship-esque device and barely six months old (August 2019).
?Miui Global Stable Mi V11.0.2
? Android 10 | Miui 11
? 2/15/2020
?Changelog:
Deodex
Add Call, Contact and SMS MIUI
Center Clock
And You
For the Install Process MANDATORY Using Custom Recovery DX By MiRoom
If you do not use Custom Recovery DX By MiRoom, it will definitely enter Fastboot mode
? For the installation process, please see / download the video below. ?
? Download Video / Streaming: here
? Download Rom: here ?
Download vbmeta.img: here | Mirror
Download Custom Recovery DX By MiRoom Install via Fastboot mode : here
By Redmi K20 Pro Indonesia
Giangvo200837 said:
I'm on miui 11.0.1 QFKMIXM and i am waiting for a month when 11.0.2 is available, but still now i dont have any new OTA update?? Why
Click to expand...
Click to collapse
I had to download the OTA zip someone sent here and ended up manually updating. Tap a few times on the 11 in the updater until a toast message pops up saying that you enabled additional options and then tap on 3 dots and select Choose update package and browse to the zip you downloaded and select it.
Honestly I have like since forever used custom ROMs on my phones and this time I wanted to have the "stock experience", but if they keep delaying updates like this I'll just switch to xiaomi.eu weekly builds.
Since 31st of January Xiaomi suspended temporarily all updates due to the Corona virus outbreak.
How do i flash ota file manually on non rooted phone?
1. Be sure you have the correct OTA file
2. Place the OTA file in a folder of the internal storage named "downloaded_rom".
3. Go to settings/about the phone/systemupdate and tick the 3 dots on the right top
4. Then tick "choose update package" with this text or similar and go to the folder where you copied the Ota file and choose that file
Then let the Ota file update do it's work and after reboot it is done.
Snah001 said:
1. Be sure you have the correct OTA file
2. Place the OTA file in a folder of the internal storage named "downloaded_rom".
3. Go to settings/about the phone/systemupdate and tick the 3 dots on the right top
4. Then tick "choose update package" with this text or similar and go to the folder where you copied the Ota file and choose that file
Then let the Ota file update do it's work and after reboot it is done.
Click to expand...
Click to collapse
The option "Choose update package" doesn't show up unless you tap the 11 in the Updater a few times, because manually installing a .zip is an advanced (duh) option.
Was assuming that people here would know.
To all the impatient... The first android 11 build of miui for
Mi 9T/Redmi K20 is here!
Note :
-This is a China Beta Rom
What it means that it have no gApps and a lot of bloatware and only english and chinese and maybe some 5 other language
If you would like to install the more global version wait for xiaomi.eu maybe Thursday or friday they will release their version
-Also don't forget to flash the latest TWRP supporting android 11
Flash at your own risk ?
================================
Redmi K20 / Mi 9T Android 11 First Build (China Beta V20.10.20)
Download :
http://bigota.d.miui.com/20.10.20/miui_DAVINCI_20.10.20_b436860943_11.0.zip
Next Weekly ROM by xiaomi.eu will be 20.10.22, released thursday (or friday if delayed by Xiaomi).
as soon as the .eu comes out I install
Enviado desde mi Mi 9T mediante Tapatalk
Micdu70 said:
Next Weekly ROM by xiaomi.eu will be 20.10.22, released thursday (or friday if delayed by Xiaomi).
Click to expand...
Click to collapse
Thanks for rectification ?
HumptyPotato47 said:
If i install china beta, i will get ota updates weekly ? Updates will work normally ?
Click to expand...
Click to collapse
Not certain about this but i think they support ota, maybe wait for xiaomi.eu if you really need ota?
If i have orangefox recovery and i wanna install xiaomi eu android 11 when it release this week, it's fine? Or need i to change recovery?
sidodz said:
To all the impatient... The first android 11 build of miui for
Mi 9T/Redmi K20 is here!
Note :
-This is a China Beta Rom
What it means that it have no gApps and a lot of bloatware and only english and chinese and maybe some 5 other language
If you would like to install the more global version wait for xiaomi.eu maybe Thursday or friday they will release their version
-Also don't forget to flash the latest TWRP supporting android 11
Flash at your own risk ?
================================
Redmi K20 / Mi 9T Android 11 First Build (China Beta V20.10.20)
Download :
http://bigota.d.miui.com/20.10.20/miui_DAVINCI_20.10.20_b436860943_11.0.zip
Click to expand...
Click to collapse
Official TWRP 3.4.0.0 or something else?
so, this means this phone will be get miui 13 and android 11 officially, right?
GabiML said:
If i have orangefox recovery and i wanna install xiaomi eu android 11 when it release this week, it's fine? Or need i to change recovery?
Click to expand...
Click to collapse
yy i try it with 10.0.2 and i boot up without any problem, but when you need flash back a10 rom you must wipe data / system before...
sidodz said:
To all the impatient... The first android 11 build of miui for
Mi 9T/Redmi K20 is here!
Note :
-This is a China Beta Rom
What it means that it have no gApps and a lot of bloatware and only english and chinese and maybe some 5 other language
If you would like to install the more global version wait for xiaomi.eu maybe Thursday or friday they will release their version
-Also don't forget to flash the latest TWRP supporting android 11
Flash at your own risk
================================
Redmi K20 / Mi 9T Android 11 First Build (China Beta V20.10.20)
Download :
http://bigota.d.miui.com/20.10.20/miui_DAVINCI_20.10.20_b436860943_11.0.zip
Click to expand...
Click to collapse
And what is the latest Twrp because nothing that i saw says it supports android 11 spesifically
HumptyPotato47 said:
Just download the latest official version which is 3.4.0.0
Click to expand...
Click to collapse
do i just flash the recovery because i had mauronofrio and orangefox right now
Soft Bricked
yes, had a soft brick. phone was only booting in to fastboot. so used the "XiaoMiTool v2" and recovered the phone with MIUI 12.0.3.0 and then downloded the ota update 12.0.5.0 and then updated to it via manual update. now not thinking of doing it again for a while , don't want to get the device bricked again.
mzan said:
yes, had a soft brick. phone was only booting in to fastboot. so used the "XiaoMiTool v2" and recovered the phone with MIUI 12.0.3.0 and then downloded the ota update 12.0.5.0 and then updated to it via manual update. now not thinking of doing it again for a while , don't want to get the device bricked again.
Click to expand...
Click to collapse
How did you get your phone bricked?
By installing this update?
If yes did you use the latest twrp 3.4.0.0?
Did you wipe data/system before doing this?
Please give more detail so other users doesn't brick their devices
sidodz said:
How did you get your phone bricked?
By installing this update?
If yes did you use the latest twrp 3.4.0.0?
Did you wipe data/system before doing this?
Please give more detail so other users doesn't brick their devices
Click to expand...
Click to collapse
TWRP - Latest = Yes
Wipe - data/system = Yes
1) adb reboot fastboot
2) fastboot flash recovery twrp3.4.0.0....
3) fastboot reboot
4) held volume+ n Power
5) TWRP came
6) advance wipe - dalvik cache/system/data/cache
7) back to main menue
8) install - select storage - OTG
9) taped on the zip, slide to flash..
Everything went well successful.
10) reboot system -- came to fastboot, repeated the same step still fastboot
Please correct me if I've done anything wrong, this is the usual step I did to flash V12.xxx earlier.
Used XiaoMiTool V2 and recovered to 12.0.3.0.. and OTA update to 12.0.5.0..
mzan said:
TWRP - Latest = Yes
6) advance wipe - dalvik cache/system/data/cache
Please correct me if I've done anything wrong, this is the usual step I did to flash V12.xxx earlier.
Used XiaoMiTool V2 and recovered to 12.0.3.0.. and OTA update to 12.0.5.0..
Click to expand...
Click to collapse
I think you should've formatted data, then after a reboot wipe.
HumptyPotato47 said:
xiaomi.eu version finally released.
https://sourceforge.net/projects/xi...iles/xiaomi.eu/MIUI-WEEKLY-RELEASES/20.10.22/
Click to expand...
Click to collapse
do you know if i need to clean install this weekly?
I just did the clean install.
so far everything ok!
mzan said:
TWRP - Latest = Yes
Wipe - data/system = Yes
1) adb reboot fastboot
2) fastboot flash recovery twrp3.4.0.0....
3) fastboot reboot
4) held volume+ n Power
5) TWRP came
6) advance wipe - dalvik cache/system/data/cache
7) back to main menue
8) install - select storage - OTG
9) taped on the zip, slide to flash..
Everything went well successful.
10) reboot system -- came to fastboot, repeated the same step still fastboot
Please correct me if I've done anything wrong, this is the usual step I did to flash V12.xxx earlier.
Used XiaoMiTool V2 and recovered to 12.0.3.0.. and OTA update to 12.0.5.0..
Click to expand...
Click to collapse
I think unlike previous iterations, we don't wipe system partition with these Roms as long as the vendor is same. (Means, If within MIUI Roms, no need. likewise with others such as AOSP)
strokesbr said:
I just did the clean install.
so far everything ok!
Click to expand...
Click to collapse
please mention the steps as for a rookie. pls
Thank You,
mzan said:
please mention the steps as for a rookie. pls
Thank You,
Click to expand...
Click to collapse
If your boot-loader is unlocked and have twrp, just FORMAT DATA, cache & Dalvik and flash the A11 Weekly Rom. Clean installation means formatting DATA partition and setting up as new.
I'm on weekly 20.09.17 and will be flashing the latest A11 weekly end of the day after work.
Edit: When you format DATA, your internal storage too would be wiped. So Make sure you have a PC (To mount twrp and copy the file) or OTG to push the Rom file to internal storage after formatting data.
manosath said:
And what is the latest Twrp because nothing that i saw says it supports android 11 spesifically
Click to expand...
Click to collapse
https://t.me/randomdavinci/33877