Original Thread: https://forum.xda-developers.com/ga...resurrectionremix-galaxy-j5-variants-t3941399
Resurrection Remix ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to the LineageOS team, Omni team, SlimRoms and of course to all the supporters.
*Not responsible for any damage caused to your device*
WHAT'S WORKING :
RIL (in-call audio, messaging, data possibly)
Bluetooth (including audio)
WiFi
Audio (music, etc)
Camera (including video recording)
Flash
Sensors
GPS
KNOWN ISSUES:
NFC doesn't work
VoLTE
SE Linux is permissive
Ambinet Display settings crash
FOLLOW INSTRUCTIONS CAREFULLY OTHERWISE YOU WILL GET ERROR :
Reboot to recovery (Use TWRP 3.2 which you can find here https://forum.xda-developers.com/ga...nt/recovery-twrp-3-1-2-blue-dogerino-t3768707 TWRP 3.3 has flash problems with the camera fix)
Wipe cache, dalvik cache, data (If you have done format instead of wipe reboot the recovery once else it will end up with issues/errors)
Flash ROM
Flash Camera fix
Flash Open Gapps (ARM - NANO (my recommendation) - 9.0)
Done- Reboot Now
Enjoy the clean rom
DOWNLOADS :
ROM: https://mega.nz/?fbclid=IwAR1OoAbAT...Z!hz1ecvX37zotlDWVDwC5-TarznVKX2mIz5sNIbLhF7A (PC downloadable through browser, for Android users, just install the app and it will let you download the file without an account)
Camera Fix: https://drive.google.com/file/d/1eB0WMgiBCL9pyyV0dUfFu2fpY9SWgUpx/view (remember, downgrade to TWRP 3.2)
Radio Fix (flash only if needed, I didn't test radio):
https://drive.google.com/file/d/12BzzmuyYrYEdd0blSSgFeXtJGUFHxEvD/view
CREDITS/THANKS TO... @vince2678, @minz1 and of course all other Galaxy-MSM8916 devs and contributors @jenslody for the Home button Wake-up fix @Zakaryan2004 @karthick mostwanted @latvianguy18
- ResurrectionRemix
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Special Thanks to:
@Francisco Funes
@latvianguy18 (Original j5 2015 ROM developer)
@bluedogerino
@Exodusnick for kernel
ROM information:
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Marshmallow Bootloader / 3.2 TWRP
Based On: LineageOS
The camera Fix link fixed, sorry for the inconvenience.
Thank you! Working perfectly, but sometimes Android randomly restarts. Also the RADIO FIX link is wrong (there are three dots in the link, instead of actual link). Camera working, every app seems like working fine too. NFC isn't working, does exist any fix? Will NFC ever work?
mozkomor05 said:
Thank you! Working perfectly, but sometimes Android randomly restarts. Also the RADIO FIX link is wrong (there are three dots in the link, instead of actual link). Camera working, every app seems like working fine too. NFC isn't working, does exist any fix? Will NFC ever work?
Click to expand...
Click to collapse
NFC isn't working neither on Oreo or Pie, there isn't much of a hope it will ever.
Sorry link fixed
Android random restarts? Everything works fine on my side...
NecromancerViper said:
NFC isn't working neither on Oreo or Pie, there isn't much of a hope it will ever.
Sorry link fixed
Android random restarts? Everything works fine on my side...
Click to expand...
Click to collapse
Oh I see. Thank you.
Yeah it does. Not too often but sometimes it does (soft restart). I was trying to find out which action makes this happen but I didn't find anything. I've been using this ROM for about 6 hours and it seems like it got better. It haven't restarted in the last hour yet.
Thanks....
I'm trying now
No more reasons to keep this thread open, please a moderator close this thread? Thank you in advance.
NecromancerViper said:
No more reasons to keep this thread open, please a moderator close this thread? Thank you in advance.
Click to expand...
Click to collapse
You have to report your own thread to close it
Sent from my kylessopen using XDA Labs
Thread closed at OP's request.
Wood Man
Senior Moderator
Related
Hi All,
I've been working on a CAF version for osprey. This is started from kernel and device tree made by Alberto97 and Squid2, so thanks a lot to them for the bringup.
This version is very early and should only be flashed by people who know what they are doing. Flash this at your own risk.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
For now only a few things are working:
Working
Bluetooth
SMS/RIL
Sound
Camera
Not work
Binaries
Here
Sources
https://github.com/boulzordev/local_manifests/tree/caf-6.0
XDA:DevDB Information
CAF-6.0 [Surnia], ROM for the Moto E 2015
Contributors
scritch007, squid2, Alberto97
Source Code: git://codeaurora.org/platform/manifest.git
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP
Based On: CAF
Version Information
Status: Testing
Created 2015-11-16
Last Updated 2016-01-04
Changelog
surnia-caf-87.zip
Updated to latest version of CM13 device specific + CM13 kernel)
Updated to LA.BR.1.2.7-00910-8x09.0.xml (February security patch)
Fixed the ringtone setting issue
Using frameworks_av from CM13 from now on.
surnia-caf-86.zip
Only tested on my Osprey and Lux, so still in testing folder
Fix setting ringtone
Fix invalid number error when the call is ended by the other end
Sepolicy from cm imported (getting ready for Sepolicy being enabled)
surnia-caf-85.zip
Settings for light management ( When opening settings values reset to default)
Dual sims outgoing should be fine now
Updated frameworks_av with CM commits
Now building osprey/lux/surnia at the same time, this is why the version is 85
Backup script when flashing in recovery. This works with open gapps. This means gapps are copied and restored when flashing
surnia-caf-0.10.zip
Dual sim outgoing calls/sms fixed (tested on Lux). Thanks to @Men_in_black007 for pointing out the missing commit
Fixed exfat external storage
MM bootanimation added. thanks to This thread
surnia-caf-0.9.zip
Updated to 6.0.1
Now using commonized msm8916 like cm13 will do
Using libshim from cm for the missing symbols
There is a bug the initial bootanimation doesn't seem to load. But it loads once rom is started and optimising applications.
surnia-caf-0.7.zip
Didn't have time to test it
The google webview
"Maybe the reboot option"
The time.sleep for the camera3 application that was posted somewhere in here
Let's hope exfat sdcard working too
surnia-caf-0.6.zip
Dual sim support (Reported OK)
Fix an issue with wifi bootloop after installing gapps (Can't really tell the trigger, but it's fixed )
surnia-caf-0.5.zip
Sdcard is now mounted and can be mounted in mtp. Still some issues about the state in the getprop and so on, but data are accessible
Fixed the OEM unlocked button issue.
surnia-caf-0.4.zip
Video Recorded can be viewed
Change Language doesn't crash anymore when accessing to phone config (if I missed some languages please tell me I'll fix them too)
surnia-caf-0.3.zip
Initial version
ohhh I'm glad to be working on 6.0 for our Surnia. Keep up the good work, thank you.:victory:
nice job?thanks
Wow thanks bro!
good work
Any specific recommended gapps? I get force closes and play service errors from open gapps.
This ROM will support Dual Sim Surnia versions like unified cm12.1?
starkly_raving said:
Any specific recommended gapps? I get force closes and play service errors from open gapps.
Click to expand...
Click to collapse
The ROM has to have a patch to support gapps now. It says so on their website when you click 6.0.
cmason37 said:
The ROM has to have a patch to support gapps now. It says so on their website when you click 6.0.
Click to expand...
Click to collapse
@scritch007 we need this commit for gapps to work on CAF/AOSP...its already upstream in CM13...
https://github.com/TeamExodus/frameworks_base/commit/9c36be651e83fb039a262682839bd920b033007a
I tested on a XT1527, and it works incredibly good only there's two issues:
1)When switching from wifi to Mobile Network (i think after a data connection, i don't know exactly) the phone freezes up, and after it shutdown to bootlogo. (i will try to provide you a logcat)
2)The mobile network doesn't work, i think so, the google search didn't response
Anyways, it's an incredible work, and keep it going! Thanks for porting Android 6.0 to our device
Wow, just tested, & everything pretty much works. The only bugs are gapps, SD Card, & the occasional random reboot. Everything else, including 4G, worked. I tested all the apps, & sideloaded chrome to test browsing/video. Once we get the gapps & SD Card fixed, it's pretty much daily driver material. Thanks, @scritch007!
starkly_raving said:
@scritch007 we need this commit for gapps to work on CAF/AOSP...its already upstream in CM13...
https://github.com/TeamExodus/frameworks_base/commit/9c36be651e83fb039a262682839bd920b033007a
Click to expand...
Click to collapse
This is already there https://github.com/boulzordev/android_frameworks_base/commits/caf-6.0
But thanks for looking into it .
@all look at the Moto G 2015 thread, some of the errors/solutions are already posted there.
RIL seems to be broken in my X1521...sim card isn't getting detected
Just tried this on my XT1521... no RIL because this is dual SIM, and no microSD, but nonetheless, great work! The ROM was extremely fluid in the few moments I used it, and fixing those issues, I would have no issues in using it as a daily driver.
scritch007 said:
This is already there https://github.com/boulzordev/android_frameworks_base/commits/caf-6.0
But thanks for looking into it .
@all look at the Moto G 2015 thread, some of the errors/solutions are already posted there.
Click to expand...
Click to collapse
It seems that the issue is actually WebView. When opengapps installs, it installs Google Webview, and since this ROM is still configured to use AOSP WebView, it doesn't work. @scritch007 you actually need this commit.
surnia-caf-0.4.zip
Video Recorded can be viewed
Change Language doesn't crash anymore when accessing to phone config (if I missed some languages please tell me I'll fix them too)
@NSDCars5 thanks updated the change log. It was taken from osprey, which didn't get previous version
@scritch007
Video recording worked fine in the last build too, I just couldn't see the recorded video in Marshmallow (in Lollipop I could see what I'd recorded in Marshmallow). So does this mean we can see recorded video in the ROM itself?
Question
scritch007 said:
surnia-caf-0.4.zip
Video Recording
Change Language doesn't crash anymore when accessing to phone config (if I missed some languages please tell me I'll fix them too)
Click to expand...
Click to collapse
When you say SD doesn't work, you mean it doesn't recognize it at all? Or is it only a minor issue? Just wondering.
Sorry for the question but on XT1524 works this?
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working?
Wifi (connection, tethering, etc)
Bluetooth
RIL (SMS, Mobile data, Calls) [dual-SIM]
Camera
Video codecs
Storage (both internal and external)
MTP storage (both internal and external)
zRAM (compressed-RAM swap)
GAPPS
USB OTG
Tethering (USB, Wifi, Bluetooth)
Sound recording
Torch (flashlight)
BUGS/Not working:
Weird sound when using loud speaker while calling
GPS doesn't work
Recorded videos through camera produces wrong color
Offline charging doesn't work
Switching to other fonts will get bootloops after restart. In this case, if you use TWRP recovery, go to File Manager >> delete "themes" from /data/system would help you escape this without factory reset
First time installing CyanogenMod 12.1 to your Galaxy Grand Prime, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended)
MULTITASKING TEST:
DOWNLOADS:
Click to expand...
Click to collapse
ALPHA-1: Link
ALPHA-2: Link
ALPHA-3: Link
BETA-1: Link
Want some screenies? Get them from Screenshot tab
XDA:DevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy Grand Prime
Contributors
doesntexits
Source Code: https://github.com/koquantam/android_device_samsung_grandprimeve3g/tree/cm-12.1
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2016-10-10
Created 2016-09-28
Last Updated 2016-10-11
F.A.Q
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: SM-G531BT
Q: Is init.d supported on this ROM?
A: Every CyanogenMod ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can i use your ROM as a base for portings?
A: Yes, you could, but give proper credits
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
CHANGELOG
ALPHA-1: Initial release
ALPHA-2: Post #21
ALPHA-3: Post #62
BETA-1: Post #145
I test it and repoet
Sent from my SM-G531H using Tapatalk
@doesntexits I test it
worked perfectly
please fix wifi bug please please
Sent from my SM-G531H using Tapatalk
tanks
Already it has much time with bugs such those of the first generation and has two stable cm 13 and up wing cm 14 (even with bugs) nosotro any and cm 12.1 faulty even: / good play wait thanks for keep working on it
mamadrahimi8 said:
@doesntexits I test it
worked perfectly
please fix wifi bug please please
Click to expand...
Click to collapse
Does mobile data work ?
ciel phantomhive said:
Does mobile data work ?
Click to expand...
Click to collapse
yes
Sent from my SM-G531H using Tapatalk
@doesntexits please build a wifi fixer.zip and upload it or build a kernel with wifi working
Sent from my SM-G531H using Tapatalk
Installed, it worked but is not receiving calls, making only, GPS is working, these bugs were that I realized ... porfavor send an update corigindo them ... You did an excellent job.
It all worked eagerly await the fix. We here at Brazil like almost all the group settled and quite bothered the bug wifi. beautiful work
Thank you!
I would like that this model don't forget, I think that is so injust that "all" roms will be designed for grand prime g530h. I think that this comunity is for all, and would like that more roms will be avaliable for this terminal. Sorry, I don't speak english very well.
Wow finally a rom for SM-G531H..... Gonna test it on my device. Good work bro :victory:
It seems that I cant receive call. Auto rotate also won't work.
naimrlet said:
It seems that I cant receive call. Auto rotate also won't work.
Click to expand...
Click to collapse
Yes, and they're all mentioned in OP buglist
doesntexits said:
Yes, and they're all mentioned in OP buglist
Click to expand...
Click to collapse
Opps I didnt read the post correctly. Sorry :silly:
Work or Not ?
Someone sent me this
plz fix bootloop on restartng issue soon
@doesntexits please fix wifi bug
Sent from my SM-G531H using Tapatalk
mamadrahimi8 said:
@doesntexits please fix wifi bug
Click to expand...
Click to collapse
Don't rush him :highfive:
Hardwork requires time :good:
SlimRoms is a custom android operating system. Our main goal is to offer users a slimmed down yet feature rich alternative to other android operating systems.
The entire SlimTeam work together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and you can stop by our public Gerrit to submit patches of any type.
Slim9 is the project name for SlimRoms based on Android 9.0.0 Pie and offers the following original features:
TBC
Important links:
slimroms.org - Our official website and your source for anything SlimRoms related.
Downloads - Slimify your device!
Installation instructions - Follow these steps if you want SlimRoms on your device.
FAQ - Have a question? Consider reading our FAQ first, you might find your answer there!.
Report-bugs - Found a bug? Send it our way!
Kernel Source - ocn kernel source.
Get in touch! - You can contact SlimRoms at these places if you have questions, requests or feedback.
Google+
Twitter
Facebook
Disclaimer: We are not responsible for any damages to your device.
XDA:DevDB Information
SlimRoms u11, ROM for the HTC U11
Contributors
Flinny, Slimroms
Source Code: https://github.com/slimroms/device_htc_ocn
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Based On: Slimroms
Version Information
Status: Testing
Created 2018-10-16
Last Updated 2018-10-27
How to install.
You're likely to have to fully wipe and fully format the data partition again.
I have been using Open Gapps for testing (ARM64 pico variant)
If you don't follow the above I can't help you
What works
All of the main stuff.
Calls
Camera
GPS
Bluetooth
Wifi
NFC
What's still to do.
It's basically AOSP at the moment, there are no real customisations yet, they will come... but no ETA!
Gestures/Squeeze etc see above.
What doesn't work?
Probably lots of things I don't use... You tell me...
Changelog
Alpha 1
* Initial Release
Alpha 2
* Audio fixes
* USB tethering should work
* Started working over sepolicy
Alpha 3
* November security patch
* Selinux enforcing
* Probably other stuff...
Alpha 4
* December security patch
* fixed a couple of sepolicy denials (thanks The_Walking_Playground,ValKyre for testing)
Alpha 5
* Tweaked the auto brightness settigns (quicksettings bar should behave now)
* Disabled Interaction boost for now, there were some strange times it was sticking.
Alpha 6
Re-enabled interaction boost
Advanced reboot menu.
Alpha 7
January security patch
Switched to Tomascus's new kernel (non-EAS version)
Merged a big chunk of Tomascus's device tree changes. (see Here)
Alpha 8 *READ CAREFULLY*
Time has been short recently, so other than merging in the March security update basically all of the device updates and kernel updates are from Tomascus (unofficial lineage builds)
I had a strange issue dirty flashing this myself, It had been flashed over a couple of hundred times in testing... all of the settings categories were all jumbled up, no amount of clearing cache/deleting app data seemed to fix it. A clean flash did. It may have only been me, just be aware.
March security patch
Switched to Tomascus's EAS Kernel
Device tree updated with many of Tomascus's changes
Alpha 9
April security updates
Synced more stuff from Tomascus/updated kernel to latest see device tree etc.
Not sure if the settings issue going between alpha 6->7 is still there as I ended up wiping.
Downloads
Alpha 4
Alpha 5
Alpha 6
Alpha 7
Alpha 8
Alpha 9
I'm running this, but obviously, use at your own risk... (I still recommend a backup before flashing new versions)
I’ll use this post to note the reported bugs.
It helps when reporting bugs to follow the Bug Reporting steps:
https://slimroms.org/#/support/report-bugs
Make sure you have properly installed ADB
Plug your device to your Computer
Open up a command prompt on your Computer
Type the following (without the quotes): “adb logcat -d > logcat.txt”
Click to expand...
Click to collapse
Either attach it to your post or report it via the above link.
1. Android Auto – Blank screen when unlocking. No audio. Possibly relates to reported issues with Google Play Services and seems to relate to Android P, not this specific build. Fix is said to be incoming.
2. Issues with SIM2 – Flinny only has a single sim device. Please report these issues with logcat so they can be looked into.
3. Brightness slider – Works from 50-100% Under 50 shows no difference. Can confirm this, but at 50% it is at its lowest.
4. OK Google – For me, and many others obviously, OK google does not work or is grayed out. I flashed this https://androidfilehost.com/?fid=385035244224414620 in TWRP and it is back to working.
5. 3.5mm adapter – It appears it may be a kernel issue and is being looked into. Works a few times then requires reboot to fix.
6. Random reboots – I have just noticed that if adaptive brightness is turned off, it will freeze randomly. Sometimes its within minutes, sometimes an hour. Ill gather a log or two when I can.
7. Audio issues - Seems to be a codec issue. I use vlc without issue. Seems streaming services work fine.
miffymiffy said:
Different to what you sent me?
Click to expand...
Click to collapse
yes....
Great news flinny thx
But I can't seen to find pie ROM link ?
Link in second post don't seem to work?
spoonymoon said:
Great news flinny thx
But I can't seen to find pie ROM link ?
Click to expand...
Click to collapse
Needed a quick rebuild to change one last thing... the link will be in the 2nd post once I've tested it.
A build is up, see the 2nd post.
Works great, you are the best thanks
All the previous issues are fixed! Good job mate. I've been running it for a week and have not found anything rom related wrong. I am dual sim too.
miffymiffy said:
All the previous issues are fixed! Good job mate. I've been running it for a week and have not found anything rom related wrong. I am dual sim too.[/QUOTE
My stock ROM have mobile network standby cause battery drain , This 9.0 rom have too? I am dual sim too.
Click to expand...
Click to collapse
Kudos @Flinny. Will give this a whirl during the weekends as it requires full format data partitions. Awesome mews ??
Sent from my HTC U11 using Tapatalk
The dark theme isnt working for me. Other than that this rom flies!
Everything seemed to be working but dark theme and WiFi calling is not working on T-Mobile. You can turn it on but it doesn't do anything. Pretty snappy though, look forward to trying this full time when WiFi calling is working, that is if it ever works. =) Great job @Flinny
Volte not working
---------- Post added at 09:13 AM ---------- Previous post was at 08:40 AM ----------
Not supporting the quick charge
pradyumna2009 said:
Volte not working
---------- Post added at 09:13 AM ---------- Previous post was at 08:40 AM ----------
Not supporting the quick charge
Click to expand...
Click to collapse
It means slow charging?
Normal fast charging seems to work, Qualcomm quick charge on the other hand is the same as it was on my Oreo builds. HTC did something strange with it on stock...
Sent from my ocn using Tapatalk
How to activate the gesture?
Martinodanada79 said:
How to activate the gesture?
Click to expand...
Click to collapse
Read post number 2....
Sent from my ocn using Tapatalk
Flinny said:
Normal fast charging seems to work, Qualcomm quick charge on the other hand is the same as it was on my Oreo builds. HTC did something strange with it on stock...
Sent from my ocn using Tapatalk
Click to expand...
Click to collapse
What about volte ? Will later builds support volte?
Thanks for all your work.
The ROM feels great, but there's one problem:
The capacitive hardware navigation buttons won't react toward long press (including home button).
Which means I can't access Google assistant by home button, and can't split screen by recent button.
I'm using Buttons Remapper to solve it somehow.
crDroid ROM for the Galaxy Note 9
What is this?
crDroid based on LOS for Galaxy Note 9. Based on Android 8.1
What's working?
Mostly everything, including dual speaker.
What's not working?
MTP - I've implemented a fix, just need to build again.
Powering off - if you power off your phone completely the rom won't boot. You need to go to trwp and reboot to system to get back in.
Let me know of any other issues.
Instructions:
Make sure TWRP has been installed and functional.
Download the latest build linked below
Reboot to recovery
Wipe data and cache (required if you switch from other ROMs). Even better if you have nothing to loose and wipe system,data,cache,storage etc
Flash the latest build (and gapps). GAPPS ARE NOT INCLUDED
Reboot and enjoy
Changelog:
19.10.2018- Initial Release
Downloads:
Galaxy Note 9 Exynos:
ROM Mega
ARH6 Vendor Required
Providing feedback:
Please feel free to provide feedback. We're trying to squash out as many bugs as possible.
JOIN OUR TELEGRAM GROUP!
https://t.me/joinchat/E_rQyU__5M_5wph6FrnpKA I'm under the name CodeFox if you need help.
Credits:
crDroid: It's their ROM.
Rainbow_Dash & malinathani: 90% of Credit to them for helping me put the build together and linking me to sources.
Vaughnnn: For his Device Trees in GitHub
Ivan: Helping me Seal the Deal. (Get him Recognised Seal status pls)
tylerr: First tester, came up with the solution to power off problem. Thank you.
Iqbal Sareem: ROM God.
Changelog:
19.10.2018 Initial Release
XDA:DevDB Information
[ROM][UNOFFICIAL][LOS][8.1] crDroid 4.7 [NOTE9][Exynos][19.10.2018], ROM for the Samsung Galaxy Note 9
Contributors
s3xxt0y, Rainbow_Dash, malinathani, jesec,Vaughnn,farovitus
Source Code: https://github.com/crdroidandroid
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 4.x
ROM Firmware Required: Vendor ARH6
Based On: crDroid, LOS
Version Information
Status: Testing
Current Beta Version: 1
Beta Release Date: 2018-10-19
Created 2018-10-19
Last Updated 2018-12-29
despacito
Rainbow_Dash said:
despacito
Click to expand...
Click to collapse
but shirley temple
Rainbow_Dash said:
despacito
Click to expand...
Click to collapse
Thread is copypasta from your thread if you can't tell. I couldn't be bothered to make it pretty tho
??
I've been using this rom for the past 12 hours. Very good. Haven't run into any issues other than the brightness bug but that's in Pixel Experience as well and you're using the same device tree so that is to be expected. (Brightness gets stuck at max once you set it at max and you have to reboot to make it unstuck)
Features are very welcome and rom is quite smooth overall. Definitely daily driver material. Really enjoying it. Appreciate your contribution to this device. I'll report anything else I find.
Thank you
Wow. I know Crdroid from one of my previous phones. Welcome
Nasty_z said:
I've been using this rom for the past 12 hours. Very good. Haven't run into any issues other than the brightness bug but that's in Pixel Experience as well and you're using the same device tree so that is to be expected. (Brightness gets stuck at max once you set it at max and you have to reboot to make it unstuck)
Features are very welcome and rom is quite smooth overall. Definitely daily driver material. Really enjoying it. Appreciate your contribution to this device. I'll report anything else I find.
Thank you
Click to expand...
Click to collapse
The brightness bug went away for me strangely. Turn on adaptive brightness and reboot and see if it goes away. Glad it's working well for you anyway. The only issue I've noticed is a bit of lag with the vibration motor when typing but turning off haptic feedback resolves that.
s3xxt0y said:
The brightness bug went away for me strangely. Turn on adaptive brightness and reboot and see if it goes away. Glad it's working well for you anyway. The only issue I've noticed is a bit of lag with the vibration motor when typing but turning off haptic feedback resolves that.
Click to expand...
Click to collapse
Just a heads up before moderators catch u the telegram link is forbidden on XDA.
This is an UNOFFICIAL build of LineageOS for OnePlus 7 (guacamoleb). Remember that this is a very early version and things could break, especially for a device as new as this one. I have literally just got hands on it last week and spent a few days fixing issues like the fingerprint scanner [WIP still].Please always flash with caution.
Working List
-RIL[VoLTE also works]
-Camera[Tested with GCAM and Snap]
-Bluetooth
-WiFi
-Dual Speakers
-MTP
-Auto-Brightness
-Cast
-Compiled with vendor image
Bugs
-The fingerprint scanner is buggy[mostly doesnt work]
-Alert slider
-- No 48MP for camera. Kind of what you'd expect for these imx586 devices.
- This ROM doesn't come with its own vendor image yet. It needs to be flashed over OxygenOS to function properly.
- SELinux is permissive.
Download: Here
Credits
- PeterCxy for his work on Oneplus 7 Pro.
- LineageOS (obviously)
- OmniROM & phhusson (for their fingerprint scanner implementation as a basis, I cleaned it up a bit and abstracted device-specific logic from the somewhat messy frameworks implementation out to HAL. I think their original implementation for Xiaomi 9 / OnePlus 6T should have been done this way also.)
- All contributors to OnePlus 6T device tree of LOS & OmniROM (I took a good amount of code from there)
Source: https://github.com/lineageos
Device Tree: https://github.com/Ashwin4RC/android_device_oneplus_guacamoleb
Kernel Tree: https://github.com/Ashwin4RC/android_kernel_oneplus_sm8150
XDA:DevDB Information
lineage-guacamoleb, ROM for the OnePlus 7
Contributors
ash4win, petercxy
Source Code: github.com/lineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Oxygen OS 9.5.5 and unified 3.3.x twrp
Based On: LOS
Version Information
Status: Testing
Created 2019-06-23
Last Updated 2019-07-13
Thanks for your effort sir
Holy god, finally......let's goooo
Thanks @ash4win on leading the game for Non-Proers (Lol)
ash4win said:
This is an UNOFFICIAL build of LineageOS for OnePlus 7 (guacamoleb). Remember that this is a very early version and things could break, especially for a device as new as this one. I have literally just got hands on it last week and spent a few days fixing issues like the fingerprint scanner [WIP still].Please always flash with caution.
Working List
-RIL[VoLTE also works]
-Camera[Tested with GCAM and Snap]
-Bluetooth
-WiFi
-Dual Speakers
-MTP
-Auto-Brightness
-Cast
Bugs
-The fingerprint scanner is buggy[mostly doesnt work]
-Alert slider
-Double tap to wake
-- No 48MP for camera. Kind of what you'd expect for these imx586 devices.
- This ROM doesn't come with its own vendor image yet. It needs to be flashed over OxygenOS to function properly.
- SELinux is permissive.
This build has encryption removed.I will publish builds with working encryption after all of the bugs get fixed.
Download: Here
Credits
- PeterCxy for his work on Oneplus 7 Pro.
- LineageOS (obviously)
- OmniROM & phhusson (for their fingerprint scanner implementation as a basis, I cleaned it up a bit and abstracted device-specific logic from the somewhat messy frameworks implementation out to HAL. I think their original implementation for Xiaomi 9 / OnePlus 6T should have been done this way also.)
- All contributors to OnePlus 6T device tree of LOS & OmniROM (I took a good amount of code from there)
Source: https://github.com/lineageos
Device Tree: https://github.com/Ashwin4RC/android_device_oneplus_guacamoleb
Kernel Tree: https://github.com/Ashwin4RC/android_kernel_oneplus_sm8150
XDA:DevDB Information
lineage-guacamoleb, ROM for the OnePlus 7
Contributors
ash4win, petercxy
Source Code:github.com/lineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Oxygen OS 9.5.5 and unified 3.3.x twrp
Based On: LOS
Version Information
Status: Testing
Created 2019-06-23
Last Updated 2019-06-23
Click to expand...
Click to collapse
Think u
Any updates?
DevilRockr said:
Any updates?
Click to expand...
Click to collapse
I am trying to fix fp and alert slider.
Will release a build after fixing.
If u are free to test, ping me in telegram at t.me/ashwinrc
Thanks for your work!
New build with compiled vendor image.
Send logs about bugs.
lineage-16.0-20190713-UNOFFICIAL-guacamoleb.zip
New build
-Fixed encryption and keyguard issues.
-Fixed MTP (again)
-Upstreamed kernel.
-Some more bug fixes.
lineage-16.0-20190713-UNOFFICIAL-guacamoleb.zip
-Also send logs for issues[FP & Alert slider}
thank you！！
very thanks for your devotion!
awesome rom
this rom is awesome but have somes bugs
ash4win said:
-Fixed encryption and keyguard issues.
-Fixed MTP (again)
-Upstreamed kernel.
-Some more bug fixes.
lineage-16.0-20190713-UNOFFICIAL-guacamoleb.zip
-Also send logs for issues[FP & Alert slider}
Click to expand...
Click to collapse
Hi, thanks for your work, installation guide?
Nice work. Unfortunately it's not really working for me.
My problem: the UI freezes and display brightness gets at maximum until the UI crashes & restarts.
This happens every 10-90 seconds, mostly when I'm switching apps/windows, using app history or using the back button. Unusable this way.
I've tried to create and import a bug report but it's impossible this way.
That's what I've made to install custom LOS, but I'm not sure if this is really the right method, because I'm still the only one who is reporting this problem:
Preconditions: Unlocked bootloader & USB debugging enabled.
Installed the Fastboot ROM made by Mauronofrio and updated via OOS update to the latest version to make sure to have a clean & up2date stock system as base.
Loaded and booted the TWRP*.img via Fastboot and installed the TWRP-Installer*.zip from it.
Booted into TWRP recovery and installed the LineageOS.zip from this thread plus Magisk*.zip.
Wiped cache, Dalvik, data & booted OS.
I hope someone can help me with this problem, because OxygenOS is really disappointing.
There are so many features missing that I know and appreciate from LineageOS.
It seems not possible to get rid of GAPPS on OOS too. I've tried it with the Magisk debloater module multiple times, but ended on boot looping my device every time.
OSUserx said:
Nice work. Unfortunately it's not really working for me.
My problem: the UI freezes and display brightness gets at maximum until the UI crashes & restarts.
This happens every 10-90 seconds, mostly when I'm switching apps/windows, using app history or using the back button. Unusable this way.
I've tried to create and import a bug report but it's impossible this way.
That's what I've made to install custom LOS, but I'm not sure if this is really the right method, because I'm still the only one who is reporting this problem:
Preconditions: Unlocked bootloader & USB debugging enabled.
Installed the Fastboot ROM made by Mauronofrio and updated via OOS update to the latest version to make sure to have a clean & up2date stock system as base.
Loaded and booted the TWRP*.img via Fastboot and installed the TWRP-Installer*.zip from it.
Booted into TWRP recovery and installed the LineageOS.zip from this thread plus Magisk*.zip.
Wiped cache, Dalvik, data & booted OS.
I hope someone can help me with this problem, because OxygenOS is really disappointing.
There are so many features missing that I know and appreciate from LineageOS.
It seems not possible to get rid of GAPPS on OOS too. I've tried it with the Magisk debloater module multiple times, but ended on boot looping my device every time.
Click to expand...
Click to collapse
Hello friend, when installing the ROM, you have to do in Wipe / advanced / wipes a System, Data, cache & dalvik?
Are you still working on bug fixing?
This project seems to be dead.
Kollachi said:
This project seems to be dead.
Click to expand...
Click to collapse
Phone's not available in USA.
Which I assume halves XDA development base.
cowgaR said:
Phone's not available in USA.
Which I assume halves XDA development base.
Click to expand...
Click to collapse
Isn't the Pro model available? Makes me wonder how difficult it is to port ROMs between models.