I have found screen protectors that work for the most part. The skinomi for the LG V40 works pretty well for the outside screen. It is bigger than the inside screen, so the ones for the inner screens dont cover it as well. The inner ones I found work well but it wont shut completely so I just have one on the phone screen now. I will link the ones I used below.
Inner Screens:
https://www.amazon.com/gp/aw/d/B07TJ7M4NF/ref=ox_sc_act_image_1?smid=AVRBPWFOF87S1&psc=1
Outer Screen:
https://www.amazon.com/Protector-Co...v40&qid=1572790274&sprefix=skinomi+lg+&sr=8-3
Sent from my LM-G850 using Tapatalk
Did you find any that work with both inner screens? So careful with this new phone worried about scratching it but cannot find anything for both inner screens
I used an Iphone Xs Max screen protector and it fits great, it just has a slight gap where the notch is since the iphone has a larger notch, but otherwise fits perfect.
I put a glass one on the phone itself, a glass one on the outside of the dual screen case, and a plastic one on the inside screen of the dual case.
You can't use a glass screen screen protector on both the phone and inside screen of the case as they are too thick and won't let the case close properly.
Related
I ordered x6 pack of matte screen protector, when I put it on my phone I saw that it dosen't much perfectly because the edges of the phone are curved and the screen protector dosen't stick well in this places.
I talked to the seller and he claims that there isn't screen protector that covers the whole front side (screen side) of the phone and the only thing that he can do is to send me some new design of this screen protector that smaller then the one he already send me.
This new design dosen't cover all the front side of the phone but it sticks well.
Is this true, there isn't any screen protector that can cover the whole pront side of the phone in a perfect way?
Give skinomi skin tech a try it protects the whole face of the phone
Sent from my GT-I9300 using XDA
11alex11 said:
I ordered x6 pack of matte screen protector, when I put it on my phone I saw that it dosen't much perfectly because the edges of the phone are curved and the screen protector dosen't stick well in this places.
I talked to the seller and he claims that there isn't screen protector that covers the whole front side (screen side) of the phone and the only thing that he can do is to send me some new design of this screen protector that smaller then the one he already send me.
This new design dosen't cover all the front side of the phone but it sticks well.
Is this true, there isn't any screen protector that can cover the whole pront side of the phone in a perfect way?
Click to expand...
Click to collapse
http://www.ebay.com/itm/180899455694?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Price is high $14.
FULL.
http://forum.xda-developers.com/showthread.php?t=1695024
JJE
Is this protectors that you mentions is matte protectors?
So, after a week of use; I am starting to get little scratches on the glass of the watch. Anybody have any ideas on how I could get a decent screen protector for the watch? I know there aren't any perfectly sized ones for this device but maybe somebody here already found one that fits.
You may be getting real scratches on the screen, but be aware that the sapphire-coating on the TS also can appear scratched when it really is just marked. To clean those markings off takes some fairly serious buffing, but you might find the screen was not really scratched and comes out clean again.
There are no screen protectors currently available specifically cut to fit the TS. You could cut one yourself, maybe using that peel-off sticker it shipped with.
Sent from my Nexus 7 using Tapatalk
I cut my own screen protector out of an old one (unused) that I had laying around. Turned out horrible.
It was the more rigid type and where the edge of the TrueSmart screen has a bevel the screen protector was just hanging out over it. It ended up collecting dirt and made it hard to access the back and menu swipe actions. I also considered cutting it back to only the actual screen portion but I figured that was just going to make those swipe actions even more miserable so I just tossed it.
My guess is that the only thing that would work would be one of the more flexible stretchable type screen protectors, not sure how well they would conform to the bevel on the glass though.
I was just curious that how many of you use your phone without any protection? I just started using like that and it feels really nice. The hyper-cut diamond finish gives a good grip to the hand.
I really like the feel of the phone in the hand, nicest I've had to hold, and is the only phone I ever use a case with...I just know if I leave it out the case there will be an expensive accident.
I use it without cover but with a glass screen protector
I don't use any glass or cover. I buy nice designed phones to feel the nice full metal unibody with a slim design.
If i would like to feel any cheap, fat plastic body i can buy a phone with a cheap plastic body.
I use xtremeskins UK sticker on top of back of my phone and plastic film screen protector as the one preinstalled has worn out. I have black carbon fibre version of the sticker with red accent on camera lens (which actually matches power button colour ) it looks cool and gives that extra grip.
Here is a link to website:
https://www.xtremeskins.co.uk/products/huawei-p10-skins?variant=36513341329
You can see for yourself how will your phone look like before you buy the actuall skin. The quality of a skin is amazing ,it's hardly add any bulk to the device and it does make it feel better in hand as well as add that extra wow factor when you pull out your phone from pocket.
I received my P10 on Thurs 07/12 and wanted to get a few opinions on whether i should remove the factory fitted screen protector prior to applying a glass screen protector or if i should just clean the factory fitted protector with the alcohol pads/swabs provided and stick the new glass screen protector on top?
Does the factory fitted protector reduce the clarity/sharpness of the screen in any way?
Would this be adequate:
https://www.amazon.co.uk/SUFUS-Prot...-4&keywords=huawei+p10+screen+protector+glass
Kind Regards
I'm using the original Huawei Flip cover and a full glass screen protector. As an electrician my hands aren't clean Everytime I grab my phone and sometimes I need to put some tools in the same pocket as the P10 is in.
But I hate the glass protector even it works very well. There's a black border around the whole protector and after a few month the protector doesn't fit perfectly anymore, it moved a bit to the left. The transparent part of the protector is a bit smaller than the screen and this is kind of annoying especially know it's moved.
I don't want to use a protector, but I think I need one. I don't want an ugly scratch on the screen.
Hi,
I removed the factory installed film in the screen and replaced it with a matte IQ Shield protector. It's great. It's not glass, but it has no reflections. Like most laptops.
Attached are the photos of the 6T solid suit and the impact screen protector that I just installed this morning. The solid suit feels amazing and the screen protector is film and feels like glass, but is definitely not glass, just so there is no confusion there. It does seem to go from left edge to right edge completely and where I placed it seems to cover the entire screen top to bottom. The slider on the case really works and the buttons are fantastic; smooth and clicky, not at all hard to press. I love both and I'm glad I got them ordered on Black Friday now because two protectors and a case was not inexpensive but they are both super high quality and way more affordable than the glass one from T-Mobile so I'm happy with my purchase. If you have any questions I'll try my best to answer them!
Also, don't mind the doggo, she likes being in pictures.
Can u tell me how the side buttons are? Are they still clicky? Or are they mushy like the stock case that comes with the phone....
And how's the slider button? Is it flimsy?
lemonspeakers said:
Can u tell me how the side buttons are? Are they still clicky? Or are they mushy like the stock case that comes with the phone.... Nn
And how's the slider button? Is it flimsy?[/QUOTENnnnn n N
The buttons are great, I handed someone else my phone so two people could verify that they are very clicky and easy to push. The slider has some play in it up and down but it does work correctly when it hits the slider on the device. No issues with functionality at all this is a really great case.
Click to expand...
Click to collapse
I tried crashguard on op6 and hated it. I think I'll like the solid suit better. Thanks for the pics. Screen protector is intriguing also, seems very clear....
Thankfully I waited I can get the print backs now. Just waiting or one particular one to be available
Is the screen protector you have on This one? It says "Not Full Coverage" on it... I can't see clearly on your photos how close to the edge of the screen the screen protector comes to... I had the same impact screen protector on my old Samsung Galaxy S7, and it didn't even cover the full screen on the left and right, which is the reason I didn't order this screen protector for my 6T..
how slick is the screen protector compared to the pre-applied plastic one from OP?
gregwee said:
Is the screen protector you have on This one? It says "Not Full Coverage" on it... I can't see clearly on your photos how close to the edge of the screen the screen protector comes to... I had the same impact screen protector on my old Samsung Galaxy S7, and it didn't even cover the full screen on the left and right, which is the reason I didn't order this screen protector for my 6T..
Click to expand...
Click to collapse
Sorry about the late response I'm traveling abroad. I have the impact screen protector as the tempered glass one is for the back I think. Anyway, as far as not full coverage I think what they mean is that it covers the visible screen but not the edges past that. It doesn't extend fully top to bottom either but it does cover all the visible screen space as far as I can tell; no obvious cutoff of the screen though it does require precise placement to line it up properly.
Frankenscript said:
how slick is the screen protector compared to the pre-applied plastic one from OP?
Click to expand...
Click to collapse
Much slicker definitely. Feels like glass but definitely doesn't get rid of oil the way glass does. It feels good to the touch and it is very strong as I dropped on a stool and it bounced onto a hardwood floor right after that. There was no damage to the screen, but the protector did crack so I'll replace it when I get home. It did very well holding up to direct impact on a metal stool; lived up to the hype for me.
Can u take better pictures of the screen protector again?
AlkaliV2 said:
Much slicker definitely. Feels like glass but definitely doesn't get rid of oil the way glass does. It feels good to the touch and it is very strong as I dropped on a stool and it bounced onto a hardwood floor right after that. There was no damage to the screen, but the protector did crack so I'll replace it when I get home. It did very well holding up to direct impact on a metal stool; lived up to the hype for me.
Click to expand...
Click to collapse
The impact resistance shatters? I thought it was some type of plastic film.
https://imgur.com/a/BJD1GmC
I also purchased a SolidSuit (with the lens mount) for my 6T and while I like the build material, I don't like the little details. Let me explain:
1) The back of the case has this weird look and feel like it's made from three separate medium-fiber density board with a black sticker over it. I can actually feel the transitions between the three pieces and I don't like it. See the attached picture.
2) There is a noticeable gap at the top of the phone where the back meets the bumper edge. However, on the bottom, it's completely flush. My pockets are clean, but somehow dust and small particles find its way into that tiny gap. Ugh,
3) The special lens adapter is amazing since I am now able to mount the Moment 18mm WIDE V2 lens. However, since the bayonet mount sits so far away from the camera lens, it creates vignetting. FYI: The OP6T and the OP6 share the same lens adapter. I bought both. They are labeled differently, but they are identical in every way: height, mounting point, etc. If they did this correctly, the adapter for the OP6T should be SHORTER since it does NOT have the same camera height protrusion as the oneplus 6.
https://imgur.com/a/BJD1GmC
zymphad said:
The impact resistance shatters? I thought it was some type of plastic film.
Click to expand...
Click to collapse
It didn't shatter really, it just cracked along a seam where the impact was. When I get back home in two days I'll try to get pictures of the crack and the screen protector.
Hi.
I was using foil based screen protector for long time but it wear out so I'm out for something new. I thought about getting glass or hydrogel one but I've noticed they don't cover whole screen but only flat part. So the edges aren't protected and as a "bonus" this does create sharp edge that is especially noticeable when swiping from edge (like some gestures or something).
So is there good glass or hydrogel protector that covers whole screen, also with rounded part? Can you recommend any? Or should I get back to foil one if it bothers me so much?
My recommendation would be to get a case for the phone, as well. I'm still using the one that came in the box, and it works great with the screen protectors I've used. Though, I haven't tried a tempered glass one. I've been using film ones.
Haha...nevermind. I suppose you probably already got one in the intervening 6 months.