Introduction:
You can read on your own in the official site: https://www.kali.org/kali-linux-nethunter/
Basically, this installation allows you to run the official Kali Linux, a Debian-derived Linux distribution designed for digital forensics and penetration testing, over Android. It should work fine also for Xiaomi Mi9T/Redmi K20 as well as for any other Android devices, but I share it for our device because I've tested it before and I would like to guide you through some device specific(I believe) issues I faced during the process...
Disclaimer:
Before we start, I would like you to know that if you follow my guide, you get yourself in the risk of possibly bricking your device, so I'm not responsible for any bad consequences... Proceed at your own risk!
BEFORE EVERYTHING:
INSTALL BUSYBOX (magisk repository is recommended)
Process:
1. Install nethunter app & nethunter terminal app from Nethunter App Store.
2. Open nethunter app and navigate to Kali Chroot Manager.
3. Install latest chroot (minimal or full).
4. When the installation is finished, click start chroot.
5. After that, DO NOT choose to install Kali Metapackages and close the app!
6. After, open Nethunter Terminal and choose "Kali"
7. Now, type in the commands:
a) apt-get update
b) apt-get updgrade
c) apt-get dist-upgrade
8. Done! Enjoy some Pen-Testing!!!
Notes:
1) MONITOR MODE WORKING FOR THE INTERNAL WI-FI CARD for stock MIUI kernel and any other kernels you can achieve it by testing,
BUT PACKET INJECTION ISN'T WORKING!!!
(check custom commands)
2) HID attacks are working but you should first change the device USB function to "hid", through the Nethunter app, on USB Arsenal section.
3) As for EXTERNAL WI-FI ADAPTERS support, a custom kernel is required specifically for that purpose.
(Take a look at this thread) or you can join a maintainer's telegram group who's making one: https://t.me/onett_boots​
No one interested in pen testing anymore?
akuani said:
Good guide TS. I will certainly use this in the future.
Click to expand...
Click to collapse
Nice
We are still interested thx for taking time make this Tutorial :good:
ishan42151 said:
We are still interested thx for taking time make this Tutorial :good:
Click to expand...
Click to collapse
Glad to hear that!
Thx. Definitely usable in time to come.
trizex said:
Thx. Definitely usable in time to come.
Click to expand...
Click to collapse
Hurray!
David_#27 said:
No one interested in penetration testing anymore?
Click to expand...
Click to collapse
penetration
No sir, it's no nut November :silly:
nakulp said:
penetration
No sir, it's no nut November :silly:
Click to expand...
Click to collapse
I'll take that as a "thanks"?
Hello,
Got an issue saying : data/data/chroot: can't execute '/bin/bash': No such file or directory.
Any idea ?
adi90 said:
Hello,
Got an issue saying : data/data/chroot: can't execute '/bin/bash': No such file or directory.
Any idea ?
Click to expand...
Click to collapse
Please explain to me what exactly is that you did...
I mean the process you followed...
Thanks a lot,mate!
David_#27 said:
Please explain to me what exactly is that you did...
I mean the process you followed...
Click to expand...
Click to collapse
Follow exactly what you said ?
Anyway, solve the issue using stericson busybox instead of the one available as magisk module.
Btw, did you get a chance to use a wlan external dongle ? Seems I can't get those to work
adi90 said:
Follow exactly what you said ?
Anyway, solve the issue using stericson busybox instead of the one available as magisk module.
Btw, did you get a chance to use a wlan external dongle ? Seems I can't get those to work
Click to expand...
Click to collapse
Seems weird... I used busybox module from magisk... Anyway, I am going to use a realtek wifi card until Friday, when I get a USB-OTG adapter! I'll inform you about the result...
Monitor mode
How to set wifi card to monitor mode??
nk724666 said:
How to set wifi card to monitor mode??
Click to expand...
Click to collapse
Just by Googling it I found this:
https://youtu.be/cugg9yNSnj4
adi90 said:
Follow exactly what you said ?
Anyway, solve the issue using stericson busybox instead of the one available as magisk module.
Btw, did you get a chance to use a wlan external dongle ? Seems I can't get those to work
Click to expand...
Click to collapse
Me neither... I suppose a custom kernel that supports monitor mode for Kali Linux must be built... As I am not the kernel developer, someone else will have to build it... I hope we figure this out!
David_#27 said:
No one interested in pen testing anymore?
Click to expand...
Click to collapse
U know, u can always do some pencil testing, if u don't bother...
works in mi 9 128gb?
patrick10K said:
works in mi 9 128gb?
Click to expand...
Click to collapse
Yes, I think so...
Related
Install Xposed, on ZenFones.
Note: This tool is no longer being maintained/supported.
Disclaimer
This tool is specifically made for ZenFones. If you have an Intel x86 device you can try this but only at your own risk. If you mess up, the only one who will be responsible is going to be you! So if you don't have a ZenFone or some other Intel x86 device please stay away from this tool!
Requirements
Common Sense
Necessary drivers.
Root Access
This Tool (Mirror)
USB Debugging turned on
Compatibility List
Asus ZenFone 4/4.5 (Android KitKat)
Asus ZenFone 5 (Android KitKat)
Asus ZenFone 6 (Android KitKat)
Acer Iconia 8 B1-810 (Android KitKat)
Reported by: @paraiso-san
Dell Venue 3740 (Android KitKat)
Reported by: @Dev.Katalyst @real_sl4cker @xjgper
Dell Venue 3741 (Android KitKat)
Reported by: @sam.crowther
Motorolla RAZR i XT890 (CM11)
Reported by: @Paul95 @Eserim
There will be more devices. And if you're able to install Xposed Framework on your device with this installer then let me know and I'll add your device to this list.
Instructions
Unzip the Tool on your Computer
Run the Tool
Confirm whether or not you want to Install
Let it do it's magic
Grant Root permission
Press the Install/Update button
Grant Root permission again
Press OK to reboot
Done.
FAQ
Can I use this tool on my Asus ZenFone with Android 4.4?
Of course you can, this tool has been specifically made for ZenFones (running Android KitKat). So unless you do something extraordinarily stupid there is nothing that can go wrong. And if you think you have the potential to do something that stupid, abort! I repeat abort the mission!
Click to expand...
Click to collapse
Can I use this tool on my Asus ZenFone with Android 5.0+?
No.
Click to expand...
Click to collapse
I have a similar device with an Intel Atom processor, should I try this tool?
Considering you have an Intel inside device, this tool should work. However whether or not you should try this tool is upto you!
Click to expand...
Click to collapse
I have a similar device with a MTK/Qualcomm chip, should I try this tool?
That's not a similar device.-_-
Click to expand...
Click to collapse
My device got bricked or went into a bootloop!
Deal with it.
Click to expand...
Click to collapse
Facing issues or Love my work? Just let me know.
XDA:DevDB Information
[Tool] Installer for Xposed Installer, Tool/Utility for the Xposed Framework
Contributors
yourarjunjadeja
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2014-12-23
Created 2014-12-25
Last Updated 2017-09-05
Ty
Problem
I have problem with module. Everything applications restart my phone. Asus Zenfone 5 2850:crying::crying:
Hi!
eduardo.martins.bastos said:
Ty
Click to expand...
Click to collapse
Your welcome.
Marthhy said:
I have problem with module. Everything applications restart my phone. Asus Zenfone 5 2850:crying::crying:
Click to expand...
Click to collapse
Please elaborate so that I can help.
The application says Xposed is currently not active, yet everything was installed. Is it alright?
Also, when I try to activate a module, it says cannot write to /data/data/de.robv.android.xposed.installer/conf/modules.list
Hello
jim7777 said:
The application says Xposed is currently not active, yet everything was installed. Is it alright?
Also, when I try to activate a module, it says cannot write to /data/data/de.robv.android.xposed.installer/conf/modules.list
Click to expand...
Click to collapse
Open Xposed Installer. Now click on "Framework". Now check whether the values below "active" and "bundled" are same. If they are not same than click on "Install/Update". Then simply reboot. If this doesn't solve the problem, feel free to reply.
yourarjunjadeja said:
Open Xposed Installer. Now click on "Framework". Now check whether the values below "active" and "bundled" are same. If they are not same than click on "Install/Update". Then simply reboot. If this doesn't solve the problem, feel free to reply.
Click to expand...
Click to collapse
yep they are the same, (the green colored numbers on the left, the same with on the right)
Yet xposed says it isn't active nor installed. Still experiencing problems activating modules though.. I cannot activate any module and instead, it shows that error I posted above.
Try this
jim7777 said:
yep they are the same, (the green colored numbers on the left, the same with on the right)
Yet xposed says it isn't active nor installed. Still experiencing problems activating modules though.. I cannot activate any module and instead, it shows that error I posted above.
Click to expand...
Click to collapse
Uninstall the framework, uninstall the app and install Xposed using the tool once more.
If it doesn't help, message me on hangouts (link to G+ on my xda profile) and we'll figure something out with a video chat!
jim7777 said:
yep they are the same, (the green colored numbers on the left, the same with on the right)
Yet xposed says it isn't active nor installed. Still experiencing problems activating modules though.. I cannot activate any module and instead, it shows that error I posted above.
Click to expand...
Click to collapse
Yo. Xposed is pretty unstable at zenfone 5. At least for me I can't run the greenify module and didn't tried the amplify but the greenify keeps rebooting the phone and so...Now I only use greenify @ root and it's fine. And I removed the xposed
Not really
Eduardomb said:
Yo. Xposed is pretty unstable at zenfone 5. At least for me I can't run the greenify module and didn't tried the amplify but the greenify keeps rebooting the phone and so...Now I only use greenify @ root and it's fine. And I removed the xposed
Click to expand...
Click to collapse
Xposed is not at all unstable. The only issue ZenFones ever had with Xposed was the installation bit, and that's why we have this tool. I haven't used Greenify so I can't write anything about it but so far I have had no issues with Xposed framework.
yourarjunjadeja said:
Xposed is not at all unstable. The only issue ZenFones ever had with Xposed was the installation bit, and that's why we have this tool. I haven't used Greenify so I can't write anything about it but so far I have had no issues with Xposed framework.
Click to expand...
Click to collapse
Maybe i can give a try and reinstall it later. Do u use amplify @ xposed?
Desctription
yourarjunjadeja said:
Your welcome.
Please elaborate so that I can help.
Click to expand...
Click to collapse
Installation was fine. Greenify can run and how it works. Other modules for xposed well. I have a problem that applications that are not part of xposed causes the system rebooted. For example, e-mail, weather, 2SD card, and many more. I was very much looking forward to xposed. But for restart other applications we have to uninstall it.
Any idea
Maybe
Eduardomb said:
Maybe i can give a try and reinstall it later. Do u use amplify @ xposed?
Click to expand...
Click to collapse
Sorry the only modules I use are: GravityBox [KK], Unicon, Xposed GEL settings and Youtube AdAway.
Marthhy said:
Installation was fine. Greenify can run and how it works. Other modules for xposed well. I have a problem that applications that are not part of xposed causes the system rebooted. For example, e-mail, weather, 2SD card, and many more. I was very much looking forward to xposed. But for restart other applications we have to uninstall it.
Any idea
Click to expand...
Click to collapse
It might be possible that Greenify is causing all your problems. So what I suggest is a clean Xposed Install. And not use Greenify, at least for now. It sure is worth a try.
Xposed installs normally on my ASUS ZenFone 5 (A501CG) without this thing. No bootloops, no problems, nothing. Everything just works fine.
dgadelha said:
Xposed installs normally on my ASUS ZenFone 5 (A501CG) without this thing. No bootloops, no problems, nothing. Everything just works fine.
Click to expand...
Click to collapse
What modules do u have?
quite interesting post, totally run into this thread by accident.
having lenovo TabS-50F, which comes with Intel processor. Checking some users who has the same tablet, many did report that normal xposed worked fine, but some got issue with random reboot...i wonder if this is related to using normal xposed installer..
jazzespresso said:
quite interesting post, totally run into this thread by accident.
having lenovo TabS-50F, which comes with Intel processor. Checking some users who has the same tablet, many did report that normal xposed worked fine, but some got issue with random reboot...i wonder if this is related to using normal xposed installer..
Click to expand...
Click to collapse
I think it depends more on the modules. If you use normal install xposed you will soft brick your zenphone ( not 100% sure but pretty sure).
Eduardomb said:
I think it depends more on the modules. If you use normal install xposed you will soft brick your zenphone ( not 100% sure but pretty sure).
Click to expand...
Click to collapse
forget about ZenPhones, I am stricly talking about using xposed on "Intel x86 devices"
what modules worked on zenphone 5?
Guys, so i installed xposed on zenphone 5, now i want to know what all modules worked on this phone?? also in gravitybox waht tweaks worked??
kunalshah912 said:
Guys, so i installed xposed on zenphone 5, now i want to know what all modules worked on this phone?? also in gravitybox waht tweaks worked??
Click to expand...
Click to collapse
WIth the Stock ROM you won't be able to use all the functionalities provided by GravityBox however universal modules will work. If you want to use Xposed to it's fullest I suggest that you flash this AOSP ROM.
This form is to help understand how to install Xposed Installer and also which modules work and which ones don't. Lets mod this bad boy... Finally!
1. Go here http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979
2. Download xposed-v71-sdk22-arm-by-romracer-20150816.zip (not arm64 or x86) (the 4th one down)
3. Go here http://forum.xda-developers.com/showthread.php?t=3034811
4. Download XposedInstaller_3.0_alpha4.apk (2nd one down)
5. Reboot into TWRP Recovery
6. Click Install
7. Locate xposed-v71-sdk22-arm-by-romracer-20150816.zip and install (you should see no red lined error messages during install)
8. Reboot Phone
9. Locate XposedInstaller_3.0_alpha4.apk and Install.
10. Enjoy
Working Modules
1. GravityBox [LP] v5.1.4
2. YouTube AdAway
3. Greenify
4. CM Settings (for call recorder)
Not Working Modules
reserved
reserved
reserved again
reserved again
Thanks! Added to the index. I will try this out myself. I suggest putting "[GUIDE]" at the beginning of the thread title so people know this is a guide and not a question.
If there could be a thread for installing Viper, or maybe somehow shoehorn it in here making this a CyanogenMod modding guide thread for our phone, that'd be awesome!
ScoobSTi said:
Thanks! Added to the index. I will try this out myself. I suggest putting "[GUIDE]" at the beginning of the thread title so people know this is a guide and not a question.
If there could be a thread for installing Viper, or maybe somehow shoehorn it in here making this a CyanogenMod modding guide thread for our phone, that'd be awesome!
Click to expand...
Click to collapse
i cant seem to edit the thread title
superbass311 said:
i cant seem to edit the thread title
Click to expand...
Click to collapse
Edit the first post, then click the button that says "Go Advanced"
Screen FIlter isn't working. Keeps telling me to make sure it's enabled in Xposed installer and reboot. I've done those already.
I lost Xposed when I updated the latest CM and after flashing it again it still says its not installed *edit* got it back
Several members wanted one hand setting back. Anyone tried that module? I am sure they would appreciate it. And gloves mode. I know there are modules for both.
MikeyLee said:
I lost Xposed when I updated the latest CM and after flashing it again it still says its not installed *edit* got it back
Click to expand...
Click to collapse
How'd you get it back?
Moody66 said:
Several members wanted one hand setting back. Anyone tried that module? I am sure they would appreciate it. And gloves mode. I know there are modules for both.
Click to expand...
Click to collapse
I live in FL what's glove mode...
superbass311 said:
I live in FL what's glove mode...
Click to expand...
Click to collapse
That's Huawei's term for high sensitivity mode. So phone works well with gloves etc.
It was part of CM but I think it got removed. Never used it myself. Even though I now live in Ohio. Lol. Guess it's handy. Maybe for work gloves for people. Dunno.
superbass311 said:
I live in FL what's glove mode...
Click to expand...
Click to collapse
Moody66 said:
That's Huawei's term for high sensitivity mode. So phone works well with gloves etc.
It was part of CM but I think it got removed. Never used it myself. Even though I now live in Ohio. Lol. Guess it's handy. Maybe for work gloves for people. Dunno.
Click to expand...
Click to collapse
I'm in NY so during the winter it gets pretty brutal. Glove mode works wonders, but if your gloves are too bulky you'll still need to take them off for accurate taps.
Here is the video
https://www.youtube.com/watch?v=---Utv9QfZk&feature=youtu.be
There is also an official sdk from @rovo89. See http://forum.xda-developers.com/showpost.php?p=62604734&postcount=18 and http://forum.xda-developers.com/showpost.php?p=62637612&postcount=19
Which one is better suited for the MT2L03? @romracer's or @rovo89's?
iammudd said:
There is also an official sdk from @rovo89. See http://forum.xda-developers.com/showpost.php?p=62604734&postcount=18 and http://forum.xda-developers.com/showpost.php?p=62637612&postcount=19
Which one is better suited for the MT2L03? @romracer's or @rovo89's?
Click to expand...
Click to collapse
Rovo. As the original is not for 5.1 just 5.0.
Moody66 said:
Rovo. As the original is not for 5.1 just 5.0.
Click to expand...
Click to collapse
In that case, FYI, Rovo just released v74... http://forum.xda-developers.com/showpost.php?p=62760329&postcount=20
superbass311 said:
This form is to help understand how to install Xposed Installer and also which modules work and which ones don't. Lets mod this bad boy... Finally!
1. Go here http://forum.xda-developers.com/xposed/super-alpha-posted-permission-xposed-t3072979
2. Download xposed-v71-sdk22-arm-by-romracer-20150816.zip (not arm64 or x86) (the 4th one down)
3. Go here http://forum.xda-developers.com/showthread.php?t=3034811
4. Download XposedInstaller_3.0_alpha4.apk (2nd one down)
5. Reboot into TWRP Recovery
6. Click Install
7. Locate xposed-v71-sdk22-arm-by-romracer-20150816.zip and install (you should see no red lined error messages during install)
8. Reboot Phone
9. Locate XposedInstaller_3.0_alpha4.apk and Install.
10. Enjoy
Working Modules
1. GravityBox [LP] v5.1.4
2. YouTube AdAway
3. Greenify
4. CM Settings (for call recorder)
Not Working Modules
Click to expand...
Click to collapse
If upgrading the ROM Xposed stops working ... :S
4l3x15 said:
If upgrading the ROM Xposed stops working ... :S
Click to expand...
Click to collapse
Cuz Xposed need be reinstalled as well.
Anybody else seeing that October 6th CyanogenMod isn't working with xposed?
Sent from my Ascend Mate 2 using Tapatalk
[N950U] ROM customization
As Title suggest this thread is to look possibilities of ROM development for N950U (snapdragon)
As we know N950U have locked bootloader and no custom recovery but still we can try for similar changes to ROM which offers for exynos variant
I don't own this device so can't test anything myself, If you guys ready to test we can move on to ROM customization further
Starting from basic need of customization, we need Busybox
Here a application N950U Busybox. Try it and report back.
How to test
Requirements :
- N950U with root access
Install :
- Download and Install attached N950U_Busybox_1.0.apk as regular apk
- Open from drawer - Grant SU
- Check for Busybox status
- If you don't have busybox installed, you will see - Long press to install busybox as status
- Long press there and wait till toast notification appear (usually take 30-40 sec) "busybox installed Reboot device"
- Reboot device and again open app and see if Busybox showing installed
Busybox installed, ready to test.
cpgoodson2004 said:
Busybox installed, ready to test.
Click to expand...
Click to collapse
Thank you for test and report.
Are you sure on first opening it was not installed and after long pressing +reboot installed it?
Better if you post screenshot
Screenshot attached
cpgoodson2004 said:
Screenshot attached
Click to expand...
Click to collapse
Thank you very much. I will start with basic mods and will send you pm tomorrow.
Works on N920C.
Installed it > open it from drawer > long press to install
Thank you
yerebakan said:
Works on N920C.
Installed it > open it from drawer > long press to install
Thank you
Click to expand...
Click to collapse
No required to test on N5
This made with special purpose for N8 snapdragon
dr.ketan said:
No required to test on N5
This made with special purpose for N8 snapdragon
Click to expand...
Click to collapse
As a heads up to you. The snapdragon model can do most modifications that do not touch the boot.img. Some things like xposed do not work though. Something to do with the way it calls the libraries.
me2151 said:
As a heads up to you. The snapdragon model can do most modifications that do not touch the boot.img. Some things like xposed do not work though. Something to do with the way it calls the libraries.
Click to expand...
Click to collapse
Yes, got report from a user and many modifications works, yet couldn't spent enough time for N950U, will start soon
dr.ketan said:
No required to test on N5
This made with special purpose for N8 snapdragon
Click to expand...
Click to collapse
I installed your busybox app for Turkey_Volte_Fix.
Using the same method to flash that modified root system image. You could theoretically flash any custom image.
Im in for testing too....
dazemc said:
Using the same method to flash that modified root system image. You could theoretically flash any custom image.
Click to expand...
Click to collapse
I was thinking that same thing! As long as we use a firmware thats before the patch issued by Samsung then we should be able to use the same method used in SamFail to flash modified system images.
Hi guys, stumbled across this thread looking for something else. Every mod i have tried has been successful on the Snapdragon variants, I have an app in the T-Mobile section that adds audio mods, 3minit mods, clock positions, bixby reassign, navbar color. Im not sure on whether Flashfire is an option as i never went down that road, i simply have rom control running scripts to place modified files.
I'm here for the testing also
dallen5 said:
I'm here for the testing also
Click to expand...
Click to collapse
Thank you
Will pm you in morning.
dr.ketan said:
Thank you
Will pm you in morning.
Click to expand...
Click to collapse
Ok
I will test as well as i have 2 of these phone dont care what happens to one both are rooted
i have a n8U to test things!
I'm about to install your busybody right now I have a sm-n950u
It's nice to have you working on the n950u. Thanks for the hard work you are about to do. I
I compiled the GSI overnight, its aosp_arm64_a Legacy GSI, because the ones I keep downloading are all August security patch and I wanted it a little more up to date. I got the source directly from google and built it myself. AB is now uploaded as aosp_arm64_ab. A only is also up as aosp_arm64_a-aosp. I ran it on my One Plus 5, NFC was buggy but the camera, ril, Bluetooth, wifi, and everything I tried out worked. this is vanilla, so its bare bones. no apps besides the basics, no mods or any customizing. As this is a GSI it should be useable on many devices, I can only help you with the devices that I own, pixel XL and one plus 5. If you have a device other then that, you will have to find help from someone knowledgeable about that device. I have had success using twrp and fastboot to flash the system image. I was told doing it via fastboot is the best, so you can disable verified boot, then flash, then format all in one shot. My device did not require me to disable the verify boot. From my end it was literally as simple as 3 commands via fastboot and then restart the device and I was in. I flashed a 50mb gapps package from xda here, and magisk. took some photos, connected my Bluetooth speaker, made a call. sent some texts, installed a few apps. I will be staying on stock. But only because my device has stock pie, and the theming from one plus far trumps google.
aosp_arm_a-userdebug and aosp_arm_ab-userdebug added
https://mega.nz/#F!Xh4g2KSB!EJIGQtvLFKzHzqKXmZI7tg
Sources: https://source.android.com/setup/build/gsi
Do you find it smoother than HOS Pie Beta ?
Thanks for your share! Awesome, I don't need/use NFC.
korm85 said:
Do you find it smoother than HOS Pie Beta ?
Click to expand...
Click to collapse
It's very fast. install and boot was very fast. but I just discovered my home button does not work. however I don't assume that would be a difficult fix. the back and pages button are working. its very bare tho, you need to install everything you want manually. Which I prefer, it gives me more control over my phone I find. Hydrogen works ok too, it just requires a bit of work to get play store going and remove all the bloatware. GSI camera worked fine from boot.
Dzol Cp said:
Thanks for your share! Awesome, I don't need/use NFC.
Click to expand...
Click to collapse
upload is at finished now
can a mod change the title to reflect that this will have the AB and A GSI not just A? Please and thank you.
Thanks! Any chance of an arm build?
Got no boot ......?!
Device's nubia z17 sd835
91egt said:
Thanks! Any chance of an arm build?
Click to expand...
Click to collapse
yea, it will be up in the morning. I did A and just about done AB for arm64, then will do A and AB arm
aljoscha81 said:
Got no boot ......?!
Device's nubia z17 sd835
Click to expand...
Click to collapse
how did you flash it? I didnt use trwp, I used fastboot from the pc
godkingofcanada said:
how did you flash it? I didnt use trwp, I used fastboot from the pc
Click to expand...
Click to collapse
Maybe thats the matter i always use twrp but got..... So far never problems ....?
Make it a difference?
aljoscha81 said:
Maybe thats the matter i always use twrp but got..... So far never problems ....?
Make it a difference?
Click to expand...
Click to collapse
It shouldn't. But its twrp. Weird things happen. Use fastboot. Its only 3 or 4 steps. The tutorial is on the google gsi website. I tried via twrp and had no issues however. It started to launch then rebooted, second boot it loaded OK
Cracked screen. But you can see the build info
godkingofcanada said:
Cracked screen. But you can see the build info
Click to expand...
Click to collapse
Ok.. will test out with fastboot thanks a lot!
aljoscha81 said:
Ok.. will test out with fastboot thanks a lot!
Click to expand...
Click to collapse
No problem
AB will be posted in about 2-3 hours. After that I will build A only Arm. It should be available by morning.
a/b please
irfaniphank2 said:
a/b please
Click to expand...
Click to collapse
Aosp_arm64_ab-userdebug will be on the link in post 1 in about 90 min. Its 90% done building.
godkingofcanada said:
Aosp_arm64_ab-userdebug will be on the link in post 1 in about 90 min. Its 90% done building.
Click to expand...
Click to collapse
:good::good::good::good::good::highfive::highfive::highfive:
AB arm64 legacy is now uploaded to the link in post one. Arm A and AB will show up over night. Starting with a in the morning. It takes about 4.5 to 5 hours to build
No information, because xda`s moder delete some my post
Gaspaddar said:
Description:
-normal AOSP
-must unlock bootloader
Positive
Play Market is pre-installed
Root is pre-installed, it works fully (the magic analog can change the system)
Minuses
Bad headphone signal
GPay won't work
Maybe something else @Gaspadar
Installation
Reboot into Bootloader
Connect your smartphone to your computer
Register via adb
fastboot flash system AOSP.img
Link
Click to expand...
Click to collapse
Nice bro
Can you share some screenshots?
Can i rollback to emui if i want after installing this?
I'm very happy with this
How to flash magisk and root?
Can we get twrp?
Is there any hope for android 11 and 12 for our device in future?
alisadeghian said:
Is there any hope for android 11 and 12 for our device in future?
Click to expand...
Click to collapse
1) Check guide, root yet, screen not have, because working with my version emui
2) Instruction in guides
3)In our device R has yet, but many problem with vendor
Gaspaddar said:
1) Check guide, root yet, screen not have, because working with my version emui
2) Instruction in guides
3)In our device R has yet, but many problem with vendor
Click to expand...
Click to collapse
Aw
Ok Thanks