Is it safe to use a magnetic mobile holder? - LG V30 Questions & Answers

Is it safe to use a magnetic mobile phone holder with the LG V30? I just bought a used V30 and I have a dash mount magnetic holder that I used with a phone that did not have wireless charging and I don't want to brick the V30 with it if that is a problem. Thanks for any advice.

Been using that for months with no issues.

Android# said:
Been using that for months with no issues.
Click to expand...
Click to collapse
Thank you very much for the reply and good news. :good:

To offer some additional clarification and reassurance: phone eMMC isn't affected by magnetism (not at these levels anyway), the compass is probably a hall-effect electronic compass and far less susceptible to nearby magnets than a traditional compass would be, and anything else delicate (like the camera stabilization) is far enough away from the mount to not be bothered by it.
Also, you stick a steel plate on the back of your phone for the magnet to attract; this plate itself shields to an extent and is directly between your phone and the magnet. That combined with magnetic force having a very short range means that not much magnetism is reaching the phone to begin with.

Thanks for your information as well. I will be using my phone for navigation as I did with my LG Stylo 3. I didn't ever have any issues with it as well. I use one of the CD magnetic mounts and I really like it for it's stability. My V30 is on order and should arrive soon though. I hope I can easily transfer my apps and settings to it as I did my G2 to the Stylo 3. I don't perceive any problems with that though.

My wife and I have been using magnetic mounts in our cars for years... no phone has ever had an issue.
The compass usually flakes out and points the wrong way (while mounted to the magnet), but most GPS software ignores it when you get moving and points towards the direction you're moving, so it's a non-issue. When the phone is removed from the mount, the compass goes back to normal.

schwinn8 said:
My wife and I have been using magnetic mounts in our cars for years... no phone has ever had an issue.
.
Click to expand...
Click to collapse
Thank you for sharing your experience as well. I had wondered how the magnet would affect the phone's compass. It is good to know that it does no permanent damage.

Alright, i have an issue with using magnetic mount. I completely love the convenience it offers but if i receive any call, and the phone is on magnetic mount, then the other person simply can't hear me. I have to take the phone off the mount and then call is fine. I usually put the phone on speaker when i get the call, and no one has ever been able to hear me when the phone is on the mount.
Anyone else getting this issue?

mandhir.s.bajwa said:
Alright, i have an issue with using magnetic mount. I completely love the convenience it offers but if i receive any call, and the phone is on magnetic mount, then the other person simply can't hear me. I have to take the phone off the mount and then call is fine. I usually put the phone on speaker when i get the call, and no one has ever been able to hear me when the phone is on the mount.
Anyone else getting this issue?
Click to expand...
Click to collapse
Not me. Again, multiple phones, many years, zero issues. I don't use speaker as much these days, as I have bluetooth on the car, but when I did have to use speaker (when BT wasn't working properly for whatever reason) speaker still worked fine. This is on my old Galaxy S3, Droid Turbo (aka Motorola Maxx), and current V30 phones. This was also with my own phone and my wifes (we usually had the same phones at the same time).

As far as I can recall the only phones that have issues with magnetic mounts are those that have digitizers with tech similar to Wacom tablets. The Samsung note series had an issue with magnetic cases causing issues with the functionality of the digitizer to degrade or fail. I'm not sure it was fixable afterwards as my note 4 succumbed to the dreaded emmc failure and I avoided magnetic devices near the phone as much as possible to prevent digitizer issues.
To answer about the V30, I've been using a magnetic mounts with mine and have had zero issues. Also, I purchased it second hand and the case had the Scosche metal plate on the back indications the previous owner also used the magnetic mounts.

@freduser, I am glad that you mentioned the Scosche steel plate as that is the brand of magnetic holder that I use. I am now confident that there will be no issues in using this mount.

graywoulf1 said:
@freduser, I am glad that you mentioned the Scosche steel plate as that is the brand of magnetic holder that I use. I am now confident that there will be no issues in using this mount.
Click to expand...
Click to collapse
Just be aware you can't use Qi wireless charging with a metal plate in between phone and the Qi wireless charging pad.
For me Qi wireless charging is my "line in the sand." Since 2013, I've only bought phones with that feature and will not ever consider one without that feature.
So I use windshield clamp in the car.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

@ChazzMatt. Thanks for the heads up but I don't plan on using any wireless chargers in my car. And since I will have the metal plate on the phone's protective outer case, I probably won't be using a wireless charger at home as I don't think it would be as efficient with all of the layers inbetween the charger and phone. I do appreciate your input on the subject though.

Good point @ChazzMatt... the metal plate will also probably block NFC (payment processing)... so be aware of that, too.
I've considered a clamp-bracket for our phones for these reasons (I don't use wireless charging, but I may try NFC)... any good vent-mounted ones I should consider?

schwinn8 said:
Good point @ChazzMatt... the metal plate will also probably block NFC (payment processing)... so be aware of that, too. I've considered a clamp-bracket for our phones for these reasons (I don't use wireless charging, but I may try NFC)... any good vent-mounted ones I should consider?
Click to expand...
Click to collapse
Since I do not use the NFC function for any reason, That is not a concern of mine.
I have never know any of my friends that liked the vent mounted phone holders as they said they were shaky. I didn't want to stick any mounts to my dash so I opted for the CD mount and in my opinion, it is very sturdy. Other than that one, I have used the windshield suction cup mounts with a large suction cup for extra stability. Good luck in your search.

schwinn8 said:
Good point @ChazzMatt... the metal plate will also probably block NFC (payment processing)... so be aware of that, too.
I've considered a clamp-bracket for our phones for these reasons (I don't use wireless charging, but I may try NFC)... any good vent-mounted ones I should consider?
Click to expand...
Click to collapse
My wife uses this one:
https://www.amazon.com/gp/product/B077B2ZZ9V/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I'm not saying it's "fantastic!" -- but I bought two for her to try and this is the one she kept.
I edited my post above to reflect I actually use windshield suction clamp, not "dashboard" clamp. It hangs over the dashboard.

I have never seen a vent mount with a lower support like that one has. That is a good idea.

graywoulf1 said:
Since I do not use the NFC function for any reason, That is not a concern of mine.
I have never know any of my friends that liked the vent mounted phone holders as they said they were shaky. I didn't want to stick any mounts to my dash so I opted for the CD mount and in my opinion, it is very sturdy. Other than that one, I have used the windshield suction cup mounts with a large suction cup for extra stability. Good luck in your search.
Click to expand...
Click to collapse
Yeah, I'd prefer a different mount, but I hate windshield ones as they fall off all the time and they're sometimes unwieldy. Vent mounts have worked well for us so far. Plus, my Caddy doesn't even have a dashboard CD player... so I can't consider that option either.
@ChazzMatt - that looks like a good potential option... maybe I'll grab it while it's on sale today! Thanks for the tip.
EDIT: Note, that holder says it won't work on vertical vents... weird. Again, the friggen Caddy has verticals in the center console. My wife's VW has horizontal, and she needs something now, so we're getting it anyway. Let's see how it goes!

Received the mounts today (crazy how Amazon gets things shipped so quickly). I'm not happy that it's a "Mac" product (made by MacAlly) but it certainly is nice. I don't see why they say it won't work on vertical vents, since the clip swivels... I guess I'll find out tomorrow when I put it on the car. Looks well made though, and they appear to have thought about the details, which is nice.
Thanks again!

Related

Mountek CD Slot Mount MT5000-C ***NOW WITH REVIEW & PHOTO***

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Amazon Link:http://tinyurl.com/3n8y64p
Ordered this mount for my wife's car, I use a ProClip unit in my car, seems to work pretty well for what it is. Mountek has them available on Amazon every weekday at 07:00 PST, I ordered mine at 08:15 PST and there were only eight left. I paid $23.90 shipped (USPS first class). I am hoping that it will fit my HTC (with extended battery) as well as my wife's OG Droid. I am not too worried about blocking any radio controls while in use because they are all mirrored on the steering wheel. She was pretty adamant about having something that was removable, and I can't stand the windshield mounts that are available.
(Here is the video from their site)
Here is the box from USPS, shipped received about a week after ordering. Included was the mount, a piece of adhesive foam, and small instruction sheet.
The mount seems to be built fairly well
This tabbed area inserts into the compact disc slot, then the knob is twisted to expand until "firm" The tabs are soft, so no marring the CD slot.
Here is the adhesive pad. DON"T USE IT WITH THE EXTENDED BATTERY The bottom rest is removable to work with a variety of electronics.
Here is my OG Droid mounted, and then the Vigor with the standard battery.
Here is the side profile with the standard battery cover. As a refresher here is the difference between the standard and extended battery covers...
Here is the mount without the bottom plate, holding the Vigor with the extended battery cover.
Here is me shaking it, with the extended battery, no problems with is falling out. Here is a top down view of the foam sides holding the Vigor.
I don't have my wife's car right now, but here is the mount in my Civic (06-11)...
To those unfamiliar, the Civic had a cd slot that is at a angle, here is with the mount installed.
Now with the Vigor installed (with extended battery) portrait and landscape.
Overall I think it is going to work well. I will update this review if I have any issues...
***Update 02-24-2011***
Works well in my wife's Subaru, does not block any of the display. No issues with the Vigor (Rezound) falling out with the extended battery, the foam on the sides works well to keep it in place.
My wife uses one in her car for her Razr. Seems to work well, and she likes it.
But, I tried it with my Rezound and there are a couple problems. With the extended battery, it's almost too thick for the mount. It will hold it, but it's not quite deep enough to hold securely. Seems like the phone would easily pop out if you bump it or even from road vibration. The second problem is that the usb port is blocked so no charging. You might be able to trim the side piece enough to get the charger to plug in, but I haven't tried.
Awesome. Just a thanks for the post. Glad to see a car mount not relying on suction, which my "textured" dash and crap make useless, and i don't want my view blocked at all in my windshield. This is the most useful car mount for me i've seen yet. too bad it'll most likely block me from keeping my Archos 5 IMT from mounting via velcro where i do lol but rarely do i use that awesome beast anymore. Can't wait to get a chance to order one.
timchristian said:
My wife uses one in her car for her Razr. Seems to work well, and she likes it.
But, I tried it with my Rezound and there are a couple problems. With the extended battery, it's almost too thick for the mount. It will hold it, but it's not quite deep enough to hold securely. Seems like the phone would easily pop out if you bump it or even from road vibration. The second problem is that the usb port is blocked so no charging. You might be able to trim the side piece enough to get the charger to plug in, but I haven't tried.
Click to expand...
Click to collapse
Could you shoot a picture of your Rezound (I still despise that name..) in mounted in the unit? Which way are you mounting it?
Updated with Photos and brief overview.
Sorry I never had a chance to get any photos up for you, but yours are great. I didn't realize the bottom plate was removable. That solves the issue of plugging the charger in. And glad to see it holds your phone securely. I think I had a case on mine when I tried it, so maybe that made some difference.
After seeing your review, I think I'll give this mount another try.
timchristian said:
Sorry I never had a chance to get any photos up for you, but yours are great. I didn't realize the bottom plate was removable. That solves the issue of plugging the charger in. And glad to see it holds your phone securely. I think I had a case on mine when I tried it, so maybe that made some difference.
After seeing your review, I think I'll give this mount another try.
Click to expand...
Click to collapse
Thanks, came in quicker than I expected.
That's crazy. I have a civic si and wanted to see how it looked and since you ha even one it looks like it works well. I wanted to place it above the big capartment infringement of the shifter. I may get this!
I actually use a ProClip mount for my car, it mounts above the driver right side vent, but it is much more permanent. You on the 8th?
Indeed I am. Same username
maximus20895 said:
Indeed I am. Same username
Click to expand...
Click to collapse
I'm on here and there, Chris/Si/4dr. Nice FG, hate black... Never again. Does look good the first 20 min after a wax though.
That's genius. Finally no longer have to deal with suction cups
It's just a dock to hold the phone in place correct? Doesn't broadcast sound through your car's audio system? Thanks.
zetsumeikuro said:
It's just a dock to hold the phone in place correct? Doesn't broadcast sound through your car's audio system? Thanks.
Click to expand...
Click to collapse
Yes it is "just" a dock... I use a dock for navigation, music, & calls. This lets your phone be within reach, not stuck to your windshield, and out of the sun.
This is what I use to "stream" music ect...
Updated photographs
I received mine last week, and have been using it for a few days now. I really like it. My CDs still play...yeah I would have to remove it to change the CD, but my car has an in dash 6-CD changer, so I already have them pre-loaded and just switch on the fly.
I'd buy this again...in fact I might buy one for the wife's car.
redbean25 said:
I received mine last week, and have been using it for a few days now. I really like it. My CDs still play...yeah I would have to remove it to change the CD, but my car has an in dash 6-CD changer, so I already have them pre-loaded and just switch on the fly.
I'd buy this again...in fact I might buy one for the wife's car.
Click to expand...
Click to collapse
Glad my little review was able to help, I haven't played a CD in almost two years.
I got this for my wife's Jeep Liberty and it works like a champ!
I used this with my Evo 4G with extended bat. and now my Rezound. I works pretty good but I can't angle it enough so that the phone is facing me directly. Also, it fits fine in my wife's Mazda with 6 disk changer but in my F150 with 6 disk changer it it really tight - even scraped off some of the protective covering of the little tabs that fit into the cd slot. I don't use the changer so I just forced it in and it's not going anywhere, didn't even have to tighten the adjustment screw.
Did you remove the back pad? Mine came with it already on. Tempted to just scrape it off.

Great Car dock for the N3! Best $12.99 I have ever spent.

I just got this in the other day and I dont like it at all.......... I LOVE IT!
Im using it in my 2013 Fiat Abarth. the car is lowered and can ride hard.
The Note 3 does not move or bounce at all.
I always use my device in the car in landscape mode, no button interference, etc.
Does not cover the Stereo display and puts the device in the perfect spot.
easy 1 handed in and out.
I ordered a 5 pack of NFC decals to have it launch car mode ultra and kick on my bluetooth audio connection.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.amazon.com/Caseology-One...=1382534019&sr=8-1&keywords=caseology+cd+slot
Hmm would probably work in my Jeep but my Viper has a flipout, probably better than just throwing my phone in the passenger seat.
List Price: $24.99
Price: $12.99
You Save: $12.00 (48%)
Note: $2.99 shipping when purchased from MODN Mall. Not eligible for Amazon Prime.
In stock on November 2, 2013.
Order it now.
Ships from and sold by MODN Mall.
Sad.. 1 out of stock, 2 no prime
Thanks i order one for my jeep, ... hmm deliver 19-Nov/4-déc
I have the magnetric one, its great.
Can you have a CD in the player at the same time? Not that it matters too much in my Honda because I have a separate 5 disc changer. But in my Jeep there's only the one.
---------- Post added at 08:13 AM ---------- Previous post was at 08:12 AM ----------
deathshead said:
I just got this in the other day and I dont like it at all.......... I LOVE IT!
Im using it in my 2013 Fiat Abarth. the car is lowered and can ride hard.
The Note 3 does not move or bounce at all.
I always use my device in the car in landscape mode, no button interference, etc.
Does not cover the Stereo display and puts the device in the perfect spot.
easy 1 handed in and out.
I ordered a 5 pack of NFC decals to have it launch car mode ultra and kick on my bluetooth audio connection.
http://www.amazon.com/Caseology-One...=1382534019&sr=8-1&keywords=caseology+cd+slot
Click to expand...
Click to collapse
Thanks for the NFC tip.
Those stick into the cd player right? Does it impede the ability to use CDs?
I had decided to buy one of these until I read a bunch of reviews that said that the dock tears up your cd player and the molding around it. Apparently, the longer it's in there the looser it gets. You have to retighten it and in doing so over and over it breaks the molding around the outside and the cd player slot. While I don't listen to cd's any more, I certainly don't want to have to pay several hundred bucks to repair something I don't use. Good luck, hope this doesn't happen to you.
For what it's worth, I did grab the iBolt car dock and it's pretty slick.
Looks kind of flimsy.
K.0.0.L. said:
Looks kind of flimsy.
Click to expand...
Click to collapse
I have one of these that will hold a Nexus 7, it can be flimsy depending on the car and how wide its CD slot it. I've used it in 15 or so cars when renting and some cars you have to take all the pads off just to get it into the CD slot, some cars you have to use the thickest pads and its still not 100% tight in the CD slot. I'm happy not using it in any car I actually own because I can easily see depending on the vehicle how it will eventually crack the plastic above and below the cd slot... more so if there are buttons close to the slot and the plastic is slim.
Be aware...
My deck has the CD slot hidden behind the screen, it would be nice and cleaner to insert this into the dash (between the plastics). How thick is the insert on this dock??
Thanks!
I heard so many bad things about these ruin the CD player so I wouldn't take a chance.
This is what I am using in my car. It's perfect. With a little practice, I can put in and out the phone with one hand. It's shaky a bit when the road is rough but pretty stable. So far, I love it.
Mount on any flat surface. My car always park under the 90 degree sun whole day and I only have to restick it twice within 3 months.
Aduro U-GRIP PLUS Universal Dashboard Windshield Car Mount for Smar... http://www.amazon.com/dp/B008ALV0V4/ref=cm_sw_r_udp_awd_PxxAsb1T94HSB
Sent from my SAMSUNG-SM-N900A using Tapatalk
What is the "magnetic one?
Sent from my TMO GN3
tdgillihan said:
What is the "magnetic one?
Sent from my TMO GN3
Click to expand...
Click to collapse
I think he's referring to the mountek Ngroove Snap, one I recently picked up
Unfortunately, I got one and it doesn't let you use NFC or wireless charging if you use the magnet and keep it under your battery cover, so I'm returning it and ordered the Exomount Touch CD instead, same concept, no magnet, not as easy to mount and unmount, but I still get NFC and the ability to use wireless charging. Was about to order this, but I didn't because I prefer the positioning of the CD slot mounts vs the suction cup mount on the windshield or dashboard, and it's way better than mounting it in the air vents.
Plus that LG one doesn't have ANY reviews anywhere, videos or anything and I want something proven, sturdy and with a good placement in my car. I already know this about the exomount because it's the same as my magnetic dock, and it has a nice video on their site demoing it too, looks awesome!
Samzebian said:
I think he's referring to the mountek Ngroove Snap, one I recently picked up
Unfortunately, I got one and it doesn't let you use NFC or wireless charging if you use the magnet and keep it under your battery cover, so I'm returning it and ordered the Exomount Touch CD instead, same concept, no magnet, not as easy to mount and unmount, but I still get NFC and the ability to use wireless charging. Was about to order this, but I didn't because I prefer the positioning of the CD slot mounts vs the suction cup mount on the windshield or dashboard, and it's way better than mounting it in the air vents.
Plus that LG one doesn't have ANY reviews anywhere, videos or anything and I want something proven, sturdy and with a good placement in my car. I already know this about the exomount because it's the same as my magnetic dock, and it has a nice video on their site demoing it too, looks awesome!
Click to expand...
Click to collapse
Many people have written about that mount. It's not by LG, but it is LG compatible, meaning it was designed to hold the LG WCP-300 Qi charger. I've had one for a few moths and it's pretty good. Instead of using the suction cup I mounted it on the dash.
This link should take you to my earlier post, complete with pictures and cost info.
http://forum.xda-developers.com/showthread.php?p=43321159
Sent from my Nexus 10 using xda app-developers app
aygriffith said:
I have one of these that will hold a Nexus 7, it can be flimsy depending on the car and how wide its CD slot it. I've used it in 15 or so cars when renting and some cars you have to take all the pads off just to get it into the CD slot, some cars you have to use the thickest pads and its still not 100% tight in the CD slot. I'm happy not using it in any car I actually own because I can easily see depending on the vehicle how it will eventually crack the plastic above and below the cd slot... more so if there are buttons close to the slot and the plastic is slim.
Be aware...
Click to expand...
Click to collapse
This.... Had the same exact experience!
This is what I've been using now and it's ROCK SOLID!!
http://www.amazon.com/Aduro-Univers...UTF8&qid=1382743344&sr=8-13&keywords=car+dock
tdgillihan said:
What is the "magnetic one?
Sent from my TMO GN3
Click to expand...
Click to collapse
http://www.amazon.com/gp/product/B00DPMNNUO/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
I can use NFC and Wireless charging just fine. I use the thicker plate and stick it right under my camera lense hole and it holds up great and I can still use wireless charging. I'm not in the car enough to use wireless in there and having a wire all the time looks dirty which is not why I use this mount
I received this dock this week after waiting about 2 weeks. It feels like a pretty sturdy build and holds the phone with no problem. Fits nicely in the CD slot on my 2009 Pontiac G6 although it does block the display which is kind of annoying.

Car Mount

Has anyone found a good car mount for the LG G3 yet?
Randomacts said:
Has anyone found a good car mount for the LG G3 yet?
Click to expand...
Click to collapse
Someone mentioned www.mountek.com
I'm tempted to purchase.
iazybandit said:
Someone mentioned www.mountek.com
I'm tempted to purchase.
Click to expand...
Click to collapse
That looks like it is made for the iphones, not sure if it would fit.
iazybandit said:
Someone mentioned www.mountek.com
I'm tempted to purchase.
Click to expand...
Click to collapse
Randomacts said:
That looks like it is made for the iphones, not sure if it would fit.
Click to expand...
Click to collapse
The ngroove snap will work as its a metalish sticket you either put on your phone or inside the case or battery cover. Though, it will kill Qi. I returned mine on my last device due to this. Never tested NFC as I never use it. If you dont care about Qi and possibly NFC, then its a great buy. There is also http://www.kenu.com/products/airframe-plus that just came out. I will be ordering this in the near future.
Hmm my parents will be using QI so that is a no go..
Does the Tmobile version come with QI preinstalled?
Also my dad doesn't want a vent one most likely, he likes the window shield car mount or what ever you would call that.
Randomacts said:
That looks like it is made for the iphones, not sure if it would fit.
Click to expand...
Click to collapse
No accessories these days are made for specific phones. No company will limit themselves to a specific model when they can cater to everyone with a universal model. It will work with iPhones, Androids and tablets. Don't judge by the images they post.
droidkevlar said:
The ngroove snap will work as its a metalish sticket you either put on your phone or inside the case or battery cover. Though, it will kill Qi. I returned mine on my last device due to this. Never tested NFC as I never use it. If you dont care about Qi and possibly NFC, then its a great buy. There is also http://www.kenu.com/products/airframe-plus that just came out. I will be ordering this in the near future.
Click to expand...
Click to collapse
Randomacts said:
Hmm my parents will be using QI so that is a no go..
Does the Tmobile version come with QI preinstalled?
Also my dad doesn't want a vent one most likely, he likes the window shield car mount or what ever you would call that.
Click to expand...
Click to collapse
They have more other than the snap version. If you want magnetic and sleek, thats the snap version. They have the grip which clamps the phone and does not use magnets
http://www.mountek.com/shop/cell-ph...al-cd-slot-mount-cell-phones-and-gps-devices/
Randomacts said:
Hmm my parents will be using QI so that is a no go..
Does the Tmobile version come with QI preinstalled?
Also my dad doesn't want a vent one most likely, he likes the window shield car mount or what ever you would call that.
Click to expand...
Click to collapse
I have this one currently and works great. I used it first for my Note 3
http://www.amazon.com/gp/product/B007FH716W/ref=wms_ohs_product?ie=UTF8&psc=1
droidkevlar said:
I have this one currently and works great. I used it first for my Note 3
http://www.amazon.com/gp/product/B007FH716W/ref=wms_ohs_product?ie=UTF8&psc=1
Click to expand...
Click to collapse
The new version of that one look kind of nice.
http://amazon.com/iOttie-Holder-Cradle-iPhone-Samsung/dp/B00JRGOKQ8/
Randomacts said:
The new version of that one look kind of nice.
http://amazon.com/iOttie-Holder-Cradle-iPhone-Samsung/dp/B00JRGOKQ8/
Click to expand...
Click to collapse
I have this one and works great with the g3, even with a case on it. I love n Fla and it has not moved from my dash since putting it on, the auction cup is top notch!
Sent from my Black Lg G3
The Air Dock is the best right now. Magnetic mounts are great - very easy to quickly place and pick up your phone, and it has qi charging. It's expensive though.
I´ll try my "old" one witch I have used with the mi2, very strong magnetic connection, but I have to wait to get a back cover to fix the metal plate (the original back cover is too tight)
http://www.infiniappstands.com/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fgcchevy said:
I have this one and works great with the g3, even with a case on it. I love n Fla and it has not moved from my dash since putting it on, the auction cup is top notch!
Sent from my Black Lg G3
Click to expand...
Click to collapse
I saw the video and I like that it attaches to the dash. But I have a few concerns..
1. The suction cup is sticky...does it get linty from dust and stuff?
2. Any marks on dash (if you have it on there) due to the sun and the suction on there? Like a discoloration?
iazybandit said:
Someone mentioned www.mountek.com
I'm tempted to purchase.
Click to expand...
Click to collapse
I use this it works great.
I have the InfiniApps Magnetic stand and it works great. I'd be keeping it if I didn't want qi charging.
This is the one I used since Nexus. Still the best one on market.
http://item.taobao.com/item.htm?spm=a1z09.2.9.336.4fNWdi&id=19923741183&_u=t5ljepda314
iazybandit said:
I saw the video and I like that it attaches to the dash. But I have a few concerns..
1. The suction cup is sticky...does it get linty from dust and stuff?
2. Any marks on dash (if you have it on there) due to the sun and the suction on there? Like a discoloration?
Click to expand...
Click to collapse
I put the mount on my dash and have yet to take it off. I don't know if there is lint and if there is any discoloration. What I do know is the the mount is as sturdy as you can get. I had an oem Samsung mount that I would stick on the window, it is so hot down here in Florida that just about everyday, it would fall off and I would need to stick it to windshield again and again. This dock has yet to lose suction. Every other dock I have used would never stick to my dash without a 3m sticky plate that then the dock would sit on. Hth
Sent from my Gunmetal Lg G3
i use this one, it's awesome!
http://www.amazon.com/Universal-Sma...id=1406677302&sr=8-1&keywords=lg+g3+car+mount
iazybandit said:
I saw the video and I like that it attaches to the dash. But I have a few concerns..
1. The suction cup is sticky...does it get linty from dust and stuff?
2. Any marks on dash (if you have it on there) due to the sun and the suction on there? Like a discoloration?
Click to expand...
Click to collapse
I just took mine off after having it on for 2 years in Virginia - so it had to deal with a lot of flex in temperatures and a ton of humidity, etc. There was a ring imprint on the dash (it's leather wrapped) for a few days but then it disappeared. I have no discoloration, but that is not mount dependent - the material of your dash is what matters as a lot of plastic ones will fade over time, and the part hidden from the sun won't. You also can simply rinse the suction cup in the faucet and then mount it somewhere else - just make sure to clean the dust off of the dash very well first.
I ordered the air dock because there is nothing else that is as fast and convenient as the InfinniApps magnet mounting dock with Qi charging. I tried opening up one of those circle Powerbots and adding magnets as a DIY but the entire thing was a coil - no wonder why it was impossible to not place the phone right - and there was no place to put the magnets where they'd work without stopping the charging.
flaring afro said:
The Air Dock is the best right now. Magnetic mounts are great - very easy to quickly place and pick up your phone, and it has qi charging. It's expensive though.
Click to expand...
Click to collapse
I don't suppose you have seen anyone using this with a G3 and the NFC/Qi sticker yet? I would be worried that the back is too textured to work on its own, and the sticker not fitting over both antennae. If it does work, I will put it on my short list; I am going to wait and see how much the Tylt Vu Car Charger ends up being before I commit to anything else since I have had such good luck with my desktop charger from them.
Illrigger said:
I don't suppose you have seen anyone using this with a G3 and the NFC/Qi sticker yet? I would be worried that the back is too textured to work on its own, and the sticker not fitting over both antennae. If it does work, I will put it on my short list; I am going to wait and see how much the Tylt Vu Car Charger ends up being before I commit to anything else since I have had such good luck with my desktop charger from them.
Click to expand...
Click to collapse
I'll let you know when mine comes in. But I'm using my InfinniApps mount right now and taped the metal plate over the qi/nfc sticker on the back cover and it sticks fine, and still charges on my Powerbot.

Proclip universal car mount

I've had a Proclip mount system for 8 years now, in 2 cars and with 5 phones now. The universal mount I'd had lasted through an iPhone 3GS, a Galaxy S2, a Nexus 4 and the Nexus 5. Unfortunately it couldn't accommodate the N6, so I purchased on of their larger ones which arrived today. It's pictured here with a naked N6, but will also work with the Spigen case I should be receiving Monday.
This is the one I bought --> http://goo.gl/tA2buI
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for the heads up. I was just thinking about this. I have the smaller universal mount, and it does fit with my Spigen Neo Hybrid, but JUST barely! I plan on getting a beefier case, so I need to get a bigger universal mount.
Thanks!
---------- Post added at 07:14 PM ---------- Previous post was at 07:08 PM ----------
Wow, I just measured. The Nexus 6 with a Spigen Neo Hybrid is nearly 3.5" wide. The Large Universal mount accomodates up to 3.5" wide. No love for a bigger case on the N6
PaisanNYC said:
Wow, I just measured. The Nexus 6 with a Spigen Neo Hybrid is nearly 3.5" wide. The Large Universal mount accomodates up to 3.5" wide. No love for a bigger case on the N6
Click to expand...
Click to collapse
Be sure to check out some of their other large(r) universal mounts. They have some that'll accommodate larger cases.
Thanks for the heads up. I am in the same boat as you were in. Love the proclip and its worked on the last 3 phones I have had but N6 is just to wide for it.
I read on another thread that they are releasing a N6 specific model but would much rather just get this instead of waiting 2-3 months for it to come out.
Never had an proclip, could somebody explain how they work? I see on their site they have custom dash mounts for specific cars but can't figure out how the phone mount fits to the dash mount. Also, can it be easily taken out with 1 hand once all set up?
The phone mount screws into the car mount. I have also used their mounts for years but always the phone specific model that's hard wired. I like that it just pop out in and it charges no cord to plug in before I put it in the holder.
So it's is a 1 handed operation? I like the ram X mount but needing to use 2 hands is a drawback.
I have a universal phone mount attached to a car mount that attaches to the a-pillar of my driver's side. its easy one-handed to pop my phone in or out. Here are stock pictures of what I use:
I bought the proclip for my Garmin a few years back. It is awesome. Might have to look at one for my N6.
kingston73 said:
Never had an proclip, could somebody explain how they work? I see on their site they have custom dash mounts for specific cars but can't figure out how the phone mount fits to the dash mount. Also, can it be easily taken out with 1 hand once all set up?
Click to expand...
Click to collapse
Its basically 2 parts. The car specific mount and then the phone mount. If you switch phones you can just get a new phone mount witch screws to your already in place car mount.
They are a bit more expensive but are rock solid and the mounts are custom designed for each car model.
If you switch holders from car to car like I do, their locking move clip system is awesome http://www.proclipusa.com/accessories/locking-move-clips/locking-move-clip-accessories.aspx
I had the same problem - long time ProClip user whose universal mount used for the Nexus 5 wasn't big enough to hold the new Nexus 6. I just took the holster apart, removed the swivel component that limits how wide the holster arms can expand, stuck it back with super glue, filed the edges and put it all back together. It works
They are running a sale right now too. Trying to decide if I should get the universal one or the Note 4 holder. N6 holder doesn't sound like it will be out for at least another month.
20% off with promo code 20THANKS
Ends Monday.
So with the universal mounts you don't get forward/backward movement of the phone? Do the sides squeeze enough to hold it in place or something even though the phone may be thinner than the slot in the mount?
Evo_Shift said:
So with the universal mounts you don't get forward/backward movement of the phone? Do the sides squeeze enough to hold it in place or something even though the phone may be thinner than the slot in the mount?
Click to expand...
Click to collapse
There is a little bit of movement (all of my phones have had some in their universal mounts), but it's still held firmly and doesn't move on it's own. With my Spigen Perfect-fit case it's actually a great fit.
I've always used the device specific ones that have an integrated charging cable. What do you folks do to handle charging in the car?
aragorn182 said:
I've always used the device specific ones that have an integrated charging cable. What do you folks do to handle charging in the car?
Click to expand...
Click to collapse
I use this http://goo.gl/EyKKmg for charging.
aragorn182 said:
I've always used the device specific ones that have an integrated charging cable. What do you folks do to handle charging in the car?
Click to expand...
Click to collapse
I'll bet this combination would work: a large universal thick holder with an anker ultra-slim wireless charging pad glued to it.
http://www.proclipusa.com/mobile-de...proclip-holder-t3-246831.cmsv?p_leftorright=0
http://smile.amazon.com/Anker-Ultra...TF8&qid=1417048965&sr=1-2&keywords=qi+charger
Can you tell me if there is 0.2 inches of space behind the phone in which to glue a wireless charger?
aragorn182 said:
Can you tell me if there is 0.2 inches of space behind the phone in which to glue a wireless charger?
Click to expand...
Click to collapse
I don't have the phone, the mount, or the charger, so, no.
But according to the specs of all three, there is enough room. However, there may be a problem with the diameter of the charger. It may be slightly too large for the prongs of the mount to close all the way. That could probably be fixed by putting a little padding on the prongs, though.

Car Mounts

We don't seem to have a thread discussing car mounts here, so...
I have an iOttie Easy One Touch XL car mount, which I got because I needed something that would fit my old Note 3 (which my previous iOttie Easy One Touch didn't). It's a great car mount, that holds the phone well, and has never fallen off the mounting plate despite crazy Ottawa temperatures.
The problem is, it doesn't fit the Pixel well. The side grips clamp right where the volume controls are on the Pixel. And though you can lower the little shelf, you can't lower it enough to prevent that.
Does anyone have any recommendations for a good car mount (not an air vent one), that works well with the Pixel but can also fit an LG G4 (in an Otterbox Commuter case)?
I use a Mag 'n Mount. It works great with both my Spigen Slim Armor and maxboost ultra slim case. It probably won't look great if you have the magnetic plate taped to a clear/translucent case though.
I purchased a proclip mount and holder for my iPhone 3g when that phone came out in 2008. It was the adjustable holder where I can slide it wider if needed. I've used the same holder and just purchased new mounts for what ever car I had at the time. I'm still using it with my pixel. It fit all of the phones in my signature after the iPhone 3g. It opened wide enough for my moto x pure with a case on it. So for the money and longevity it's great.
mdecker79 said:
I purchased a proclip mount and holder for my iPhone 3g when that phone came out in 2008. It was the adjustable holder where I can slide it wider if needed. I've used the same holder and just purchased new mounts for what ever car I had at the time. I'm still using it with my pixel. It fit all of the phones in my signature after the iPhone 3g. It opened wide enough for my moto x pure with a case on it. So for the money and longevity it's great.
Click to expand...
Click to collapse
I second ProClip, I am on their list to be notified when the form fitted holder is available for the Pixel. I have had one for my MotoX Pure, and MotoX 2014. They are awesome!
Anyone have any experience with the mounts that slot into your CD player? How well do they hold in place?
saltorio said:
Anyone have any experience with the mounts that slot into your CD player? How well do they hold in place?
Click to expand...
Click to collapse
They work great. Better than most windshield and vent mounts.
This is what I use with my Pixel
Teslan Disc Cradle Series CD Car Mount Phone Holder for iPhone and Android Smartphones and Phablets (Disc Mount) https://www.amazon.com/dp/B0162GD6BK/ref=cm_sw_r_cp_apa_zKmhybSM800JW
Montar Universal Car Mount @ Massdrop $19
https://www.massdrop.com/buy/montar-universal-car-mount?mode=guest_open
I am using Mountek nGroove Snap 3 Magnetic mount on the trim line between the panels.
https://www.amazon.com/Mountek-nGro...id=1478618523&sr=1-2&keywords=mountek+ngroove
Are there any issues with having cables plugged into a phone on a magnetic car mount? I use both an AUX 3.5mm jack as well as a charging cable, and want to make sure that those would pull the phone off (there's plenty of slack) or cause it to rotate.
My phone just came in today and I can't wait to get home and tinker on it but I'll probably transfer from my 5x to the pixel the AUKEY Car Mount Air Vent Magnetic Cell Phone Holder for iPhone 7, 6S, Plus, Samsung and Other Android, Windows Smartphones. It's $5.99 right now. As someone else mentioned, it sucks because I bought a silver pixel as much as I'd like to have a clear case, I don't want to be showing a bit piece of magnet on the back of the case so I got a black case.
My RAM X-Grip mount has been able to fit every phone I've thrown at it -- it's easy to reposition the phone so the grips avoid the buttons. I currently use the suction version on a flat piece of trim near the top of the center console and it has never failed me. Solid as a rock.
I'm sure that mount is compatible with the pixel somehow, but doesn't it look as though that top flange is sitting right on the volume buttons?
Mr patel said:
Go for Encased Google Pixel XL Easy-dock Car Mount Holder. The holder is Compatible with the Google Pxiel and Pixel XL with or without a case.
Click to expand...
Click to collapse
I'm trying to find a mount for the pixel and saw this on Amazon to. How long is the mount arm? I have an SUV (Durango) so I think I would need a pretty long arm but I can't find any mounts that won't cover the pixels volume buttons but also have a long arm :/
This magnetic one pushes onto the vents. I've been using it for a few months.
https://www.napaonline.com/napa/en/p/BK_UNISPH01MVM/BK_UNISPH01MVM
Sent from my Pixel using Tapatalk
TheBadBen said:
This magnetic one pushes onto the vents. I've been using it for a few months.
https://www.napaonline.com/napa/en/p/BK_UNISPH01MVM/BK_UNISPH01MVM
Sent from my Pixel using Tapatalk
Click to expand...
Click to collapse
Any issues with the magnet not being strong enough? Ever have the phone drop when traveling on a bumpy road?
JGoldz75 said:
Any issues with the magnet not being strong enough? Ever have the phone drop when traveling on a bumpy road?
Click to expand...
Click to collapse
I'd guess it would depend on the thickness of the case, but I haven't had any problems so far.
Sent from my Pixel using Tapatalk
If anyone is still looking, the Proclip for the Pixel (and XL) is available now. I ordered one a week or two ago and the mount for my 4Runner. I like it. I got just the mount without the cable/charger. The clip for my car is actually really nice too - I didn't even bother uncovering its adhesive as it stays pretty well without it.
I like that it has the tilt/swivel. It's in nearly the same position I had with an actual vent fin clip mount. And I like that I can just set it in the mount with one hand. It's basically just a slot you slide it down into. I had a spring mount previously that I was able to barely get in with one hand, but it was awkward.
This one is also covered in some sort of felt-like material. And not just the slot that the phone sits into - the front and back of the mount are covered in it.
Some photos:
http://i.imgur.com/XB0KSE9.jpg
http://i.imgur.com/3u2qpGH.jpg
http://i.imgur.com/j4oCwN0.jpg
http://i.imgur.com/xe3Du0X.jpg
http://i.imgur.com/gsbeeC5.jpg
Also - if you're looking to buy, I was able to find a 10% off coupon via Google that saved a couple $$ - which is good if you're buying the piece for your car and the actual mount.
Yup proclip is the way to go. Like I said in the beginning of the thread I've been using the same holder for years with no issues.
my iOttie onetouch 3 seems to hold it well with a case on it it. I think the case lifts it just enough so the side grips don't touch the volume down button.
I was really impressed with Cygnett MagMount 360 Magnetic Dash and Window Car mount when I brought it with the phone without even doing any research not knowing if it's going to fit Pixel or hold its device well. Surprisely it does do a great job holding the Pixel phone magnetically without any troubles or fuss of cables being in the way. Nicely compact, easy and durable. I highly recommend it. [emoji5]
Features:
Mount this mobile phone holder to a smooth surface like a windscreen and it stays in place
View your phone effortlessly using multiple angles
Works with a range of devices, including all smartphones, tablets weighing 450g or less,*GPS*and even the GoPro for dashcam use
Your phone can be used in either landscape or portrait position
The 360 degree rotating ball lets you tilt your device in any direction, so it can be easily accessed by driver and passenger
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Pixel using XDA-Developers Legacy app

Categories

Resources