[ROM][A600XX] H-ROM S9 PORT V2.0 [Pie][OneUI][64 bits][Treble] - Samsung Galaxy A6 ROMs, Kernels, Recoveries, & Oth

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAIMER
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Here I bring you the first Pie flagship ported rom to the exynos7870. I've spent countless hours working in this project, so respect my work and don't KANG this rom. Ask me first if you want to port it to another device.
INFORMATION
@ShaDisNX25555 and I Ported the H-ROM S9 V2.0 for A3 from @Astrakoto A6!
ORIGINAL THREAD
https://forum.xda-developers.com/samsung-a-series-2017/development/rom-h-rom-s9-port-v1-0-t3960029
FEATURES
A600XX supported
Android Pie ported from S9 (SM-G960F)
One UI
Arm64 native
Kernel 3.18.91 compiled from A600FNXXU3BSC5 sources. Built in Permissive.
Clean, debloated, fast, stable
S10 CSC with additional features
Infinity wallpapers
Edge features
Bixby Voice, Routines, Bixby Vision
Secure folder
Digital wellbeing
Call recording, screen recording
Dolby enabled for speaker and BT
VoLTE supported
...
KNOWN BUGS
A6 BUGS:
MTP DOESN'T WORK IF U DON'T USE KRAKEN KERNEL J-TYPE FROM TOUCHWIZ BUILDS!
Smartview
STANDARD BUGS:
Some 3rd part cameras don't work (eg.: Footej, Gcam, etc)
RadioFM doesn't work due to audio HAL used
Face unlock doesn't work if you have enabled fingerprint unlock
Back camera video only supports 16:9, others will give errors
Other inherent bugs from OneUI and/or A3 limitation
INSTRUCTION
Flash H-ROM
Flash Kraken Kernel Touchwiz Build J-type (Has Working MTP)
Reboot to Recovery
Flash Magisk as usual
Reboot to system
SCREENSHOTS
https://imgur.com/a/7JSc1jD
SUPPORT
https://t.me/SM_A600X
CREDITS
@Astrako for his infinite hours spent with this port
Me for porting the rom
@ShaDisNX255 For helping to port the rom @ananjaser1211 for his general help, kernel commits and hard work with 7870 @corsicanu for giving me access to theA720S Korean dump
@McFy for his general help and hard work with LOS
@khongloi113 for the secure folder mod
@topjohnwu for Magisk
@heni87 and @DAvinash97 for testing
LINK H-ROM A600XX
https://drive.google.com/drive/folders/1GbPeY_0qqzHXM0XYEyGQjg8mW6n_3cx5?usp=sharing
V1.1 (3-12-2019):
Include Kraken and Magisk so not needed to flash seperately anymore!
KRAKEN KERNEL J-TYPE LINK
https://drive.google.com/drive/folders/1ufV5FXgbL-QqY_mdcG2x4v0jvwHo1F9Y
DONATIONS
I don't need them, I don't need coffees or beers. I really hate see here people with high end devices asking for donations, but you can still donate money to charity. Donate money or simply help people that is really needed. If you like this port you can make me very happy just pushing THANKS -> @Astrako
XDAevDB Information
H-ROM S9 PORT, ROM for the Samsung Galaxy A Series 2017 A3, A5, A7 and now A6 to!
Contributors
Astrako
ShaDisNX255
DaanDH12
Source Code: https://github.com/Astrako/A600FNXXU3BSC5/tree/OneUI
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Full Pie

Finally out for the A6. I'll try to help as much as I can to improve this if possible. But you have the advantage because you have the actual device

Wish there is a S9 Port for A6+ tho... but great work as always!

JasonS. said:
Wish there is a S9 Port for A6+ tho... but great work as always!
Click to expand...
Click to collapse
A6 has the advantage of being Exynos 7870 which has a wide range of devs that are already familiar with the SoC. I wish it were easy for the A6+ lol

Plz do same for A6+

Pavel Alm said:
Plz do same for A6+
Click to expand...
Click to collapse
Can't do it on a device we don't have
And even if we had it, it would be very hard to do since the A6+ vendor partition is way too small

I have been waiting for this but, is AOD working?

HieuVi said:
I have been waiting for this but, is AOD working?
Click to expand...
Click to collapse
No, official Samsung AOD will never work on this device.

Hi . Is it compatibile with A600-FN?

CocalarBos25 said:
Hi . Is it compatibile with A600-FN?
Click to expand...
Click to collapse
It should work, yes.

Thank you for the efforts but please do something for the A6+ too.

Great Job!!!
True 64bits
voLTE and voWIFI came back for me!!!

could you mind to remove the download link and close the thread?
You are not longet authorized to share my rom.

Astrako said:
could you mind to remove the download link and close the thread?
You are not longet authorized to share my rom.
Click to expand...
Click to collapse
Where can we find it?
Sent from my POCO F1 using Tapatalk

link????????????????

Not available anymore. Will probably never get re-uploaded.

ShaDisNX255 said:
Not available anymore. Will probably never get re-uploaded.
Click to expand...
Click to collapse
Link is in original post
https://forum.xda-developers.com/samsung-a-series-2017/development/rom-h-rom-s9-port-v1-0-t3960029

Install step by step
Astrako said:
could you mind to remove the download link and close the thread?
You are not longet authorized to share my rom.
Click to expand...
Click to collapse
Flash Kraken Kernel Touchwiz Build J-type (Has Working MTP) pls tell me install steps

faild
ShaDisNX255 said:
It should work, yes.
Click to expand...
Click to collapse
I am try to flash my samsung galaxy a600f 4/64
but tha last stage fild to install costom rom( s9 port to a6 )
so you're experience write me thtere

Can I downgrade from Android 10 to 9 and flash it via twrp?

Related

[ROM][7.1.2][o5prolte][UNOFFICIAL] LineageOS ROM 14.1 [Build #1] [SM-G550FY]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 14.1 for Galaxy On5​
You've probably known that finnally tree for exynos3475 is made . So enjoy aosp now.
NOTE: this ROM is for any On5/On5 PRO model and will not work for SM-G500T
Disclaimer:
Code:
I'm not responsable for bricked devices :( , dead phone chargers,
nuclear explosions or global warming.
Flash it at YOUR OWN RISK
Downloads​1) You need a custom recovery to flash the ROM (zip). You can download TWRP HERE
2) Optional but recomended: Google Apps (aka gapps). You can download them here: http://opengapps.org/
3) You need marshmallow bootloader and modem. Install latest mm stock ROM to update them
4) You need the ROM obviusly . You can download it here:
LineageOS-14.1: HERE
How to Install​If you have TWRP Recovery:
1) Go to wipe section and wipe: cache, dalvik, system and data (internal storage wipe is not needed!)
2) Go to install box and choose the zip which contains the ROM
3) Flash wifi temporary fix (for first build only)
4) Optional but recomended: flash Google Apps' zip
5) Reboot and enjoy
How to Update
If you have TWRP Recovery:
1) Go to install box and choose the zip which contains the ROM
2) Go to wipe section and wipe: cache and dalvik
Knowing Bugs
audio disables itself after some time
To Fix call audio
1) make a temp. call
2) put phone on speaker mode
3) then put phone on mute
4)then cut the call
Now you can make any call
SOURCES
Device tree: ="https://github.com/Exynos3475/android_device_samsung_o5prolte
Kernel: ="https://github.com/Exynos3475/android_kernel_samsung_exynos3475
common:="https://github.com/Exynos3475/android_device_samsung_exynos3475-common
LineageOS:="https://github.com/LineageOS
Telegram group: @GalaxyOn5
Note: If you want to contact me for any question which is off topic, just pm me at Telegram
XDA:DevDB Information
LineageOS-14.1 for Galaxy On5 SM-G550FY
Contributors
lzzy12
Darklord1731
Rana
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Lollipop or Marshmallow bootloader/modem (mm suggested)
Version Information
Status: stable
video about it here
here
VoLTE working?
Hello sir, thank you so much for building this ROM,
I just want to know if VoLTE is working on it?
Vaibhav Puri said:
Hello sir, thank you so much for building this ROM,
I just want to know if VoLTE is working on it?
Click to expand...
Click to collapse
No Bro !
Volte can't work on exynos with AOSP .
Have a question
Does this work for SM-G5500???
JagtarSidhu said:
No Bro !
Volte can't work on exynos with AOSP .
Click to expand...
Click to collapse
Waiting for the update...
I love this ROM, sir I request you to please build this ROM with all the latest Lineage OS changes...
I use this ROM as my daily driver...
And please implement this feature: https://github.com/LineageOS/android_frameworks_base/commit/69fc4a6ffb01aafc6bb10ae66558ae954b8c85ed
I really like this feature (demo in link).
I would appreciate this a lot.
You are the only one who has built Lineage OS for On5 Pro. Thanks a lot.
Vaibhav Puri said:
Waiting for the update...
I love this ROM, sir I request you to please build this ROM with all the latest Lineage OS changes...
I use this ROM as my daily driver...
And please implement this feature: https://github.com/LineageOS/android_frameworks_base/commit/69fc4a6ffb01aafc6bb10ae66558ae954b8c85ed
I really like this feature (demo in link).
I would appreciate this a lot.
You are the only one who has built Lineage OS for On5 Pro. Thanks a lot.
Click to expand...
Click to collapse
Brother no one want any rom for on5 thats why i stopped it
JagtarSidhu said:
Brother no one want any rom for on5 thats why i stopped it
Click to expand...
Click to collapse
Sir, I don't know about others, but I personally liked it a lot, please build it for one last time with this feature:
https://github.com/LineageOS/android_frameworks_base/commit/69fc4a6ffb01aafc6bb10ae66558ae954b8c85ed
Vaibhav Puri said:
Sir, I don't know about others, but I personally liked it a lot, please build it for one last time with this feature:
https://github.com/LineageOS/android_frameworks_base/commit/69fc4a6ffb01aafc6bb10ae66558ae954b8c85ed
Click to expand...
Click to collapse
No! can't build for one user only.
Thank you a lot
JagtarSidhu said:
No! can't build for one user only.
Click to expand...
Click to collapse
I just installed your ROM and I love it, only thing I have to say is The camera issue and audio, I hace tried to fix both but I did not get good results. I'm new in this kind of things and always try to read carefully. Your recommendations will be very welcomed.
Thank you again.
Plz Can You make Android Oreo rom for Samsung galaxy on5 or on5 pro cuz i don't think Samsung will ever push oreo for this. And if that rom supports PROJECT TREBLE. PLZ PLZ PLZ
Pleeeeeeeeeeease build again. I'm quite sure sound and camera can be fixed if we all put our heads together. I'm willing to test any time on any day fixes for anything with this or anything for my On5. You did amazing work with this for this device. You are very appreciated!!!! :good:
I stumbled across this thread randomly. What you did here is fantastic.
I hope you go back and resolve the couple of quirks in this rom or release the complication so the community can do so.
The On5 was always a great phone with was crippled by all the bloatware from Samsung.
SM210 said:
Pleeeeeeeeeeease build again. I'm quite sure sound and camera can be fixed if we all put our heads together. I'm willing to test any time on any day fixes for anything with this or anything for my On5. You did amazing work with this for this device. You are very appreciated!!!! :good:
Click to expand...
Click to collapse
Ok pm me on [email protected]
LighthammerX said:
I stumbled across this thread randomly. What you did here is fantastic.
I hope you go back and resolve the couple of quirks in this rom or release the complication so the community can do so.
The On5 was always a great phone with was crippled by all the bloatware from Samsung.
Click to expand...
Click to collapse
Exynos 3475 have not stable tree bro
Is this still being worked on? Also, will it work on the sm-g550tl?
I have a sm-g550t that I'd also be very interested in this ROM for
if i install this rom to my sm-g550t1 what Gapp should i use? i mean what platform, andriod, variant?
LordBlackwolf said:
Is this still being worked on? Also, will it work on the sm-g550tl?
Click to expand...
Click to collapse
Yes, it works perfectly, with the exception of can and in and out audio not working
We need an update.
Honestly, this is a good rom, but it really needs a rebuild since camera and sound dont properly work well, except with headphones. I do own this device, and we seriously need an update to this. Its almost a year since you first uploaded this. Maybe consider using Oreo for this update? Or Pie?
This works on SM-G550T?

[ROM][STABLE][8.0.0]Ultimate Oreo Note8 Port v1.0 [G920/5-F/I/S/K/L/T/W8]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
Code:
[COLOR="black"]* This ROM is made for Only S6 and S6 Edge!
* Flash it at your own Risk!
* Your warranty is VOID Knox flags 0x1
* I'm not responsible for damage to Any dead equipment or loss of warranty![/COLOR]
Description:
Based on Official Samsung Galaxy Note8 Oreo Firmware with January Security Patch
G920-5F/I/S/K/L/T/W8 are only supported models
First ever samsung oreo rom for S6 with working GPS credits @lukasb06
First ever samsung oreo rom to support T-Mobile Models
Hyper-Kernel
Deodexed, Zipaligned
Busybox v1.29.2 Installer Included
Aroma Installer Support
Debloat Options in Aroma Installer
New Bootanimation by @rayesh5700 on telegram
Bugs:
Camera (It works but unstable)
What is Working?
Everything Except Bugs
How to Install?
1. Flash Rom
2. Flash SuperSU, can be found here(Don't Flash Magisk at First Boot - I don't mind any report from you if you flashed magisk)
3. Reboot and Enjoy
ALSO IF YOUR PHONE DIDN'T BOOT STOP TALKING ABOUT IT BECAUSE YOU DIDN'T FLASH SUPERSU
​​
Another notice
If you had symlink error while flashing rom this means your system space isn't enough for this rom. This mostly happens on Korean models, to avoid this don't install any extra app from aroma installer, if you still have the same issue i am sorry you can't use this rom​
Download:
Ultimate Oreo Note8 Port v1.0
Telegram Group:
Ultimate Telegram Group
Donate:
I do this in my free time and currently i work on this alone. If you want to support the project feel free to donate
Credits:
@lukasb06 for helping, camera and gps fix
@ananjaser1211 for helping me with kernel, camera, gps
@corsicanu for helping me all the time
@Blackmesa123 for helping with kernel and checking my logs, for signature spoof guide
@grouxho for GrxScreenTimeOut Toggle
@yash92duster for awesome thread with tons of guides and mods
@edzamber for fingerprint unlock after reboot mod
@aelle89 for helping
@rjdelc from telegram for new logo
@rayesh5700 for new bootanimation
@osm0sis for busybox installer
I DONT ALLOW ANYONE TO USE FILES FROM MY ROM OR MY KERNEL​
XDA:DevDB Information
Samsung Oreo Bring Up, ROM for the Samsung Galaxy S6
Contributors
enesuzun2002, lukasb06, ananjaser1211, Blackm3sa, corsicanu
Source Code: https://github.com/enesuzun2002/Ultimate-Kernel
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: For best exprience Nougat Modem and BL
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2019-03-03
Current Beta Version: 0.2
Beta Release Date: 2018-09-16
Created 2018-09-16
Last Updated 2020-01-20
Looks good, will try it out, Thanks
Good job bro
Flashing now will report back.
In future maybe it can help someone ?
"All oreo based roms (not only samsung, every OEM) has issues when fully deodexing the framework. Dalvik-cache will NOT be generated and hence the device is slow as hell (...)
Flashing the rom with magisk will result in a slowed down device. Please first flash the rom without magisk, boot the device 1 time (to build the dalvik-cache) and then flash magisk. This will prevent you from using a slow phone". @Tkkg1994
This looks awesome ! Good job dev :good: Can we have screenshots ?
Good work enes and everyone involved.
Just installed and so smooth not encountered any bugs yet. Running with magisk latest and working flawlessly.
Oh here's some screenies
Could you delete the other post as phone restarted as I posted
?
Here's screen's
Will this kernel work for this rom
https://forum.xda-developers.com/ga...development/kernel-quantum-kernel-v1-t3836957
Edit yes I have flashed with rom and works well
The camera does not work or does work but it is buggy?
rekin123 said:
The camera does not work or does work but it is buggy?
Click to expand...
Click to collapse
I'm getting camera failed when I load it up. Will use an alternative for now.
insigma28 said:
I'm getting camera failed when I load it up. Will use an alternative for now.
Click to expand...
Click to collapse
So the camera is working with alternative camera app....?
Sent from my SM-G920F using Tapatalk
insigma28 said:
I'm getting camera failed when I load it up. Will use an alternative for now.
Click to expand...
Click to collapse
Okey thx Alternative camera app or rom with working camera?
Sorry for stupid question
Tasneem khan said:
So the camera is working with alternative camera app....?
Click to expand...
Click to collapse
Tried 3 different apps no luck still but rom is still beta.
rekin123 said:
Okey thx Alternative camera app or rom with working camera?
Sorry for stupid question
Click to expand...
Click to collapse
Only the nougat roms
insigma28 said:
Will this kernel work for this rom
https://forum.xda-developers.com/ga...development/kernel-quantum-kernel-v1-t3836957
Edit yes I have flashed with rom and works well
Click to expand...
Click to collapse
Btw you flashed it but i also dont except bugs happened with other kernel
enesuzun2002 said:
Btw you flashed it but i also dont except bugs happened with other kernel
Click to expand...
Click to collapse
I know you don't mate, I'm gonna remove kernel and just run the one you built in rom. No issues except camera but I know the rom is beta. Cheers for the rom mate ?
insigma28 said:
I know you don't mate, I'm gonna remove kernel and just run the one you built in rom. No issues except camera but I know the rom is beta. Cheers for the rom mate [emoji106]
Click to expand...
Click to collapse
Is camera not working at all or just some bugs? Could you take pictures with?
Sent from my [device_name] using XDA-Developers Legacy app

[ROM][Android 7.1.2][LineageOS 14.1] Samsung Galaxy Grand 2 SM-G7105 (ms01lte)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[Lineage OS 14.1 | Android 7.1.1][Unofficial stable][Build 05/31/19]​Lineage OS 14.1 For Samsung Galaxy Grand 2 SM-G7105 (ms01lte)​
Code:
*** Disclamer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
Installation instructions
Install instructions:
Wipe Everything Except Internal and Sd
Flash Rom
Flash Gapps
And reboot.
Requirements:
- Flash firmware G7105XXUBQE1 before !
Download
LineageOS 14.1 ms01lte (03/11/2018)
LineageOS 14.1 ms01lte (05/31/2019)
TWRP 3.1.1 (OTA support for ms01lte)
Open Gapps
OTG boot.img (for the old version 20181103)
Flash boot.img via TWRP to enable OTG on G2.
Changelog
Code:
- 05/31/2019
- Enabled kernel CGROUP cpu acct
- Moved "Liblights: Lightvalue" errors to debug class
- 05/22/2019
- Kernel Modules enabled, lighter boot.img
- Kernel OTG native support
- Kernel CIFS, NFS Client & NFS Server
- OTA Updates
- Should fix the date bug
- NFC Beta (Android Beam seems to work at least) It REQUIRES a Stock Samsung Battery for Grand 2 or a 4 Pins battery as 1 of them is for the NFC antenna
- May security update
FAQ
No FAQ for now.
Known bugs
No bugs as I tested it.
Thanks To/Credits
Code:
* [url]https://github.com/MSM8226-Samsung[/url]
* Sudeep10 for some advices & offline charging fix.
* Samsung for opensourcing their Kernel.
My unified repositories:
https://github.com/Nemirtingas/android_kernel_samsung_msm8226
https://github.com/Nemirtingas/android_device_samsung_msm8226-common
https://github.com/Nemirtingas/android_device_samsung_ms01-common
https://github.com/Nemirtingas/android_device_samsung_ms013g
https://github.com/Nemirtingas/android_device_samsung_ms01lte
https://github.com/Nemirtingas/android_vendor_samsung_ms01-common
https://github.com/Nemirtingas/android_vendor_samsung_ms013g
https://github.com/Nemirtingas/android_vendor_samsung_ms01lte
Don't forget to hit the thanks button, thanks.​
Complaints/demands/bug reports without logs will be ignored.​
Thank You,Sir!
Good work,for Grand 2 Lte ,the best rom ever!
Galaxy Grand 2 LTE SM-G7105.........firmware G7105XXUBQE1
It works with Galaxy Grand 2 LTE SM-G7105
thanks for bringing Nougat to g7105.
everything is working fine.
especilly the battery life, it's significantly better than the official firmwares & CM13 rom
Already 160 downloads, looks like there a lot of ppl that who likes my ROM.
@Nemirtingas
Thank you for your work!
The best custom ROM ever, the most stable and battery friendly!
It's my daughter's phone and she is thrilled!
:good:
Galaxy Grand 2 LTE SM-G7105
I test your romage lineage 14.1
thank you very good rom
sms gidiyor ama gelmiyor....
piotrmocko said:
It works with Galaxy Grand 2 LTE SM-G7105
Click to expand...
Click to collapse
sms gelmiyor.hata var
Good Work
In my humble opinion, currently this is the most stable rom and best option to keep our Samsung Galaxy Grand 2 SM-G7105 phones relevant (installing new apps) and (more) secured (Privacy Guard, security patches,etc).
Except one small bug that can only be replicated if you do not install Android 7.1 GApps for ARM stock/super/aroma, everything works perfectly.
The bug in question refers to the default Lineage OS camera video recording option, basically it doesn't allow filming on 30 FPS only 60 FPS or 90 FPS which our devices do not support on 1080p recording resolution.
I have several G7105 phones and on 1st one I installed GApps for ARM 7.1 stock and the default camera was replaced by Google Camera which takes pictures and records videos correctly. On my second G7105 phone I installed GApps for ARM 7.1 mini and this GApps version doesn't replace the default Lineage OS camera which has this bug. So far my fix was to install from Google Play a different camera app which of course works with video recording [email protected].
tldr: Snap Camera is missing the OFF option from High framerate recording menu.
Thank you again for your great work!
My device is sm-g710k, it is korean version, i cant find any custom rom for this, pls help me ((
dooxxinhgai said:
My device is sm-g710k, it is korean version, i cant find any custom rom for this, pls help me ((
Click to expand...
Click to collapse
I'm not working anymore on Grand2, but you can use my repos to build a ROM for g710K, just modify the Kernel config file to use the Korean version and you're good to go I think.
Can install this rom on G7102 device?
Kidz Anonymous said:
Can install this rom on G7102 device?
Click to expand...
Click to collapse
Nope flash los 14.1 by sudeep on G7102
OTG Support link in the main post, hope you will enjoy it.
Nemirtingas said:
OTG Support link in the main post, hope you will enjoy it.
Click to expand...
Click to collapse
otg support doesn't work i flashed it as image in twrp and tried a mouse using cable
Theruski90 said:
otg support doesn't work i flashed it as image in twrp and tried a mouse using cable
Click to expand...
Click to collapse
Triied a usb stick ? OTG works on my phone. USB Stick, mouse or keyboard, I will upload a video to proove you that it works.
https://www.youtube.com/watch?v=6GMTbTYKPPQ
Me too, but i have the SM-G108V
dooxxinhgai said:
My device is sm-g710k, it is korean version, i cant find any custom rom for this, pls help me ((
Click to expand...
Click to collapse
Me too, but i have the SM-G108V i need help i cant find any rom for this phone :c
I found a bug , when you record a video with camera you cant hear any sound and the video recorded is on high speed
I'm building a new version of the ROM.
It will include OTG kernel support
I will enable OTA.
I'm working on NFC and ZRAM kernel support.
Nemirtingas said:
I'm building a new version of the ROM.
It will include OTG kernel support
I will enable OTA.
I'm working on NFC and ZRAM kernel support.
Click to expand...
Click to collapse
Nice keep up the work :good:

[ROM][OFFICIAL][NIGHTLIES] LineageOS 17.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Samsung Galaxy Note 9
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction:
This is the Official Lineage OS 17.1 thread for the Samsung Galaxy Note 9, codename crownlte.
Join our Lineage Exynos 9810 Development Telegram Group!
How to Install:
Please follow the instructions on our Official LineageOS Wiki page here.
MAKE SURE YOU ARE INSTALLING LINEAGE OVER FULLY STOCK ANDROID 10 FIRMWARE
If you don't follow these instructions, please don't expect support here. We also don't support 3rd party addons (Magisk/XPosed/Dolby/Viper/etc.), so please don't seek support if you use these.
What's not working:
Applicable exceptions granted in device support requirements.
Obviously Samsung's own features such as Samsung Pay, KNOX, Theme Center, Game Launcher, etc. won't be ported to LineageOS. We may have our own implementation to similar functions, though.
Iris sensor does not work because AOSP upstream does not support that yet.
IMS services (VoLTE, VoWiFi, etc). Samsung has their own proprietary implementation. It is not really possible to easily port that to LineageOS.
Notes:
Official Lineage OS builds will not pass CTS/SafetyNet -- due to the AVB flag's "red" status.
Official Lineage OS builds requires official stock unmodded android 10 firmware installed.
Official Lineage OS builds uses stock android 10 vendor so encryption is enabled by default.
Download:
LineageOS Updater
XDA:DevDB Information
Lineage OS for Note 9, ROM for the Samsung Galaxy Note 9
Contributors
erfanoabdi
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Official Android 10 firmware
Version Information
Status: Nightly
Created 2020-04-16
Last Updated 2020-04-17
Reserved
Reserved
Wo wo wow woooooww
What the hellll
Thanks for the LOS Official build.
One question : Any plans/thoughts about MicroG Build?
Is this kernel overclockable
N960N can flash ?
Yesssss!
Sent from my crownlte using XDA Labs
Is volte working will jio sim work india (INS)
Does it mean s-pen and ir-scanner fully working?
aljoscha81 said:
Does it mean s-pen and ir-scanner fully working?
Click to expand...
Click to collapse
S pen working. Can't find option for iris scanner tho.
Can you please confirm this @erfanoabdi
boka18 said:
S pen working. Can't find option for iris scanner tho.
Click to expand...
Click to collapse
How long did the first boot take? mine is taking so long that i'm thinking it is looping...
paulojsdias said:
How long did the first boot take? mine is taking so long that i'm thinking it is looping...
Click to expand...
Click to collapse
actually it's quite fast. about 1 minute
boka18 said:
actually it's quite fast. about 1 minute
Click to expand...
Click to collapse
so I guess I'm missing something, what custom recovery did you use?
---------- Post added at 08:52 PM ---------- Previous post was at 08:38 PM ----------
paulojsdias said:
so I guess I'm missing something, what custom recovery did you use?
Click to expand...
Click to collapse
I managed to do it
I just want to say that I'm currently using this rom and it is absolutely fantastic. Zero problems so far.
Only thing that it is not workong is Iris Scanner.
boka18 said:
S pen working. Can't find option for iris scanner tho.
Can you please confirm this @erfanoabdi
Click to expand...
Click to collapse
Spen all options working?
What a about camera? It's Samsung cam app? Or gcam/open camera/sth else?
Does s-pen as shutter button works?
Notes on/off screen? S-pen apps?
I
kotpsot said:
What a about camera? It's Samsung cam app? Or gcam/open camera/sth else?
Does s-pen as shutter button works?
Notes on/off screen? S-pen apps?
I
Click to expand...
Click to collapse
It is lineage you will not find samsung apps here spen basics works only no samsing camera no on/off screen note...
Please confirm if VoLTE is supprted
.JIO sim
No, Samsung proprietary hardware will not work on AOSP LOS roms, this is due to Samsung not using code that universally works, if you looking to use services like volte vofi or the iris scanner then this is not the place for you.
---------- Post added at 04:11 AM ---------- Previous post was at 04:09 AM ----------
I don’t know but someone can try to install the Samsung apps once...most of the spen features are handled by the app and not the system
If you install magisk, can you pass the safetynet test?

[ROM][OFFICIAL][BEGONIA][Non-CFW][11] Hycon OS V4.5.1 | Eternal

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
Hycon OS is AOSP Based ROM with many pixel features & Customizations. We always try to improve it's stability and performance for better & smooth, lagfree experience.
Rom Download [Gapps]
Device Changelog
Source Changelog​
1. Hycon OS is based on?
Ans. Its based on AOSP
2. Do we need to flash Gapps?
Ans. Depends on your device variant. If your official device support has Vanilla version then you have to flash Gapps according to your choice.
3. When will be the next update! Any ETAs?
Ans. There will be regular updates as and when the team is ready to push a new update. Kindly do not ask for ETAs.
4. I need this feature/ I found some bugs!
Ans. Firstly if u find any bug then please check with your add-ons like magisk module, zips, etc u flashed and whether its related or no. Though if your sure that its from rom side then kindly grab a Logcat and report us Here
Secondly for feature request yes u can request them on the above link.
Click to expand...
Click to collapse
Flashing Instructions​
Introdructor - Lead Developer/Maintainer
Madmax - Lead Developer/Maintainer
Pixel Experience
AOSP
LineageOS
MSM Xtended
Evolution X
Derpfest
POSP
And all the other devs/ROMs
​You can find our all sources down here:-
Kernel Source
Github
Devices
Telegram Group
Your Device Support Group
By : abhixv
Hycon OS, for Redmi Note 8 Pro [Non-CFW based]
ROM OS Version: Android 11
ROM Firmware Required : Prebuild FW 12.5 Based
Version Information
Current Version: 4.5.1
Release Date: 26-09-2021
Created: 28-03-2021
Last Updated: 26-09-2021
What is this ? No download link , no steps for instaling .....
luk0001 said:
What is this ? No download link , no steps for instaling .....
Click to expand...
Click to collapse
Sir please check Download section in the thread!!
Im kinda scared to try the rom .
Any known bugs?
Did anyone tested the rom already?
mirnesv said:
Im kinda scared to try the rom .
Any known bugs?
Did anyone tested the rom already?
Click to expand...
Click to collapse
Its a stable build sir , I have tested this build personally!!!
Hi there...
thanks for this and all the work.
Does anyone know how or IF the "new" Selfie cam is working with this???
I am stuck on RevengeOS WITHOUT selfieCam.... :../
Thx
h
Hello,
After hours of using this ROM I can say that this is currently best non-cfw rom for this device.
I haven't came across any bug.
My device have older build so my front cam is working. Don't know about newer builds.
Battery last longer on this rom incompared with pixel expirience.
hoshy42 said:
Does anyone know how or IF the "new" Selfie cam is working with this???
Click to expand...
Click to collapse
Of course it's not working.
BUT...
Using 100% of my brain i moved these files from Pixel Experience:
audio_dsp
audio_dsp_in
boot
cam_vpu1
cam_vpu1_in
cam_vpu2
cam_vpu2_in
cam_vpu3
cam_vpu3_in
vbmeta
vendor.new.dat.br
vendor.patch
vendor.transfer.list
to the .zip with HyconOS 2.0 and flashed it
and front cam is now working flawlessy.
wojownikhaha said:
BUT...
Using 100% of my brain i moved these files from Pixel Experience
[...]
and front cam is now working flawlessy.
Click to expand...
Click to collapse
What is next for you?
I would recommend to solve cold fusion!
Well done, man, thx for your work...
hoshy
Here's a download link, if someone with new camera sensor want to try this rom: HyconOS 2.0 for begonia with fixed front camera
Code:
SHA256: 6DFDB6C5D73DFA4C9B92A76B9FECE8DC8AF1DCA08AB2CBF33F84B0BC977C917E
MD5: 20AE7F70D3FB6D18187402F75B63AF06
After installation in TWRP show up message "No OS installed" while rebooting - ignore it.
wojownikhaha said:
BUT...
Using 100% of my brain i moved these files from Pixel Experience:
audio_dsp
audio_dsp_in
boot
cam_vpu1
cam_vpu1_in
cam_vpu2
cam_vpu2_in
cam_vpu3
cam_vpu3_in
vbmeta
vendor.new.dat.br
vendor.patch
vendor.transfer.list
to the .zip with HyconOS 2.0 and flashed it
and front cam is now working flawlessy.
Click to expand...
Click to collapse
Well done bro!!!
Does the selfie Camera work in the Pixel Experience ROM then?
EDIT:
Never mind I found the answer.
I see no public kernel commits that would fix the camera so I can only assume I they switched to using the stock kernel as I suggested way back on Android 10 I don't know if you remember me suggesting this or not.
@bigrammy yes, ZIDAN44 somehow forced stock kernel to work with AOSP.
wojownikhaha said:
@bigrammy yes, ZIDAN44 somehow forced stock kernel to work with AOSP.
Click to expand...
Click to collapse
You must of posted at the same time as I was editing my post above. But yes that's my conclusion too.
EDIT:
Should of listened to me back here.
[ROM][CFW][10][begonia] Pixel Experience [OFFICIAL][AOSP]
PixelExperience for DeviceName [begonia] What is this? Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation) Our mission is to offer the maximum possible...
forum.xda-developers.com
I am on OnePlus 8 now but will still keep an eye on this device.
Very nice ROM. Months ago, I decided to go back to stock because of camera and stability, but now A11 matured a lot! Camera is decent, no problems with wifi, no lags at all. Thanks a lot!
wojownikhaha said:
Here's a download link, if someone with new camera sensor want to try this rom: HyconOS 2.0 for begonia with fixed front camera
Code:
SHA256: 6DFDB6C5D73DFA4C9B92A76B9FECE8DC8AF1DCA08AB2CBF33F84B0BC977C917E
MD5: 20AE7F70D3FB6D18187402F75B63AF06
After installation in TWRP show up message "No OS installed" while rebooting - ignore it.
Click to expand...
Click to collapse
Could you tell me the instructions to install this rom (fixed front camera) and what files do I need?
is that I'm new and I'm already entangled
jhoinner said:
and what files do I need?
Click to expand...
Click to collapse
Follow this guide: https://telegra.ph/Pixel-Begonia-02-02
If something is unclear ask or search for tutorial here - https://forum.xda-developers.com/f/redmi-note-8-pro-guides-news-discussion.9294/
I have a problem installing Viper4Android via Magisk. I tried to install busybox, even changing the path to /system/bin (originally it is /system/xbin), but Viper can't find busybox, so it can't install the driver. Any suggestion?
Will it work on Redmi Note 8 Pro Indian Version. Begoniain?
RanjanJain said:
Will it work on Redmi Note 8 Pro Indian Version. Begoniain?
Click to expand...
Click to collapse
Yes it will work!

Categories

Resources