Hi friends! Tablem im buy from AliExpress, difference i have android 7, in Ali now upgraded to 9 android. Howto install android 5.1 latest twrp with root??(scatter Hardware=Hex i have) i find old post on forum, but no one of posts help me, please step by step what i need to do, thank a lot. My tablet info:
Android 7.0
Bootloader unknown
Build id BK109_20171030
Java vm ART 2.1.0
OpenGL ES 2.0
Kernel Architekture armv7l
Kernel Version 3.18.35+
Root Access No
Mediatek MT8752, by online check its (MT6580)
Cores 8
Architekture 8x ARM Cortex-A7 @ 2.00 Ghz
Revision r0p3
Gpu vendor ARM
GPU Renderer Mali - 400MP
Scaling governor interactive
Model BK109
Manufactures BMXC
screen size 10.1 inches
Resolution 800x1280
density 209dpi
hardware mt8752
total ram 3756MB (4GB)
Inernal storage 58,76GB
Click to expand...
Click to collapse
Related
here is the detail hardware info:
CPU:
Genuine Inter(R) CPU 4000 2.13 GHz
Cores 2
Architecture x86
CPUID 6.4a.8
Codename Silvermont
Process 22nm
Clock Speed 533MHz - 2.13 GHz
GPU Vender Imagination Technlogies
GPU Renderer PowerVR Rouge Hood
Android version 4.4.4
Kernel architecture x86_64
OpenGL ES Version 3.0
Kernel Version 3.10.20-263204-ga9ff696(eng.YTD802A128615.20140917.060146)
Screen Density 320 dpi
Total Ram 945MB
can anyone help to validate this is the official product, not the cheap copy, thank you!
Hello All,
I am looking at building my own rom for my tablet after playing with it for a while it seems sluggish even with the quadcore CPU, would anyone be able to point me in the right direction?
I would like to know where to start I am willing to learn the rest on my own.
Here are the specs of the device:
Processor:
Processor Chipset: Rockchip RK3126
Processor: Quadcore Cortex A7 1.3 GHz
Instruction Sets: armeabi-v7a, armeabi
GPU:
GPU: ARM Mali-400MP
OpenGL Version: OpenGL ES 2.0
Audio Chip:
Audio Chipset: Rk30sdk
RAM:
RAM: 512 MB
The sensor information on the device states Android Open Source Project or AOSP on each one which suggests that a custom rom is all ready on the device, would someone be able to point me in the correct direction for the firmware binaries so that I could build a generic rom for the device?
Here is more information on the device itself from the manufacturer http://www.time2direct.com/android-...944b-9-quadcore-android-kitkat-tablet-pc.html
I've emailed them but I haven't had a response from them.
I have found these two links which I believe to be correct for the device
http://malideveloper.arm.com/resources/drivers/open-source-mali-gpus-linux-kernel-device-drivers/
http://www.arm.com/products/processors/cortex-a/cortex-a7.php
Hello XDA Assist,
Please provide the correct forum link or update the thread so that it can reach to correct audience. I have search some thread before starting but can not find anything related for my device.
I am using a Android HDMI Mini PC stick from last few years and now want to install a custom ROM on it but not sure where to start. I have read couple of forums but the information are so vast that i am not able to grab, what i understand that first basic thing to do is to identify your hardware correctly to find compatible custom ROM and that i did using CPU-Z App then i tried to find compatible ROM but i don't know how to relate the chipset information to find custom ROM and what all are the things i need to check before proceed, So can anyone guide me in below please ?
1. Were i can find the custom ROM like CyanogenMod or similar which can be installed on my Android stick?
2. If i found one then what will be the steps to install it?
3. How take a backup of my firmware/OS so that if anything go wrong then i can restore?
My stick is rooted.
----------------CPU-Z App Summry-----------------------
Brand- leoxsys
Device Manufacturer- Unknown
Model ID- Xoro T1S
Android Version- 4.0.4
Kernel Version- 3.0.8
SoC (Processor) Architecture- ARM (armv7l)
SoC Model- Allwinner A13
SoC Family- 1x ARM Cortex-A8 @960 MHz
Frequency- 1008 MHz*/ Min: 30 MHz - Max: 960 MHz
Main CPU- Cores 1 Cores / 1 Threads
Process- 45 nm
CPUID 41.3.7.C08.2
Revision- R3P2
Features- SWP HALF THUMB FASTMULT VFP EDSP NEON VFPV3
Bogomip-s 1001.88 MIPS
SoC Manufacturer- ARM
SoC Model- Mali-400 MP
OpenGL- Ver. 2.0
RAM- 844 MB (1 GB)
Flash- 503 MB
Thanks
sDas
any assistance will be appreciated
sdas_online said:
Hello XDA Assist,
Please provide the correct forum link or update the thread so that it can reach to correct audience. I have search some thread before starting but can not find anything related for my device.
I am using a Android HDMI Mini PC stick from last few years and now want to install a custom ROM on it but not sure where to start. I have read couple of forums but the information are so vast that i am not able to grab, what i understand that first basic thing to do is to identify your hardware correctly to find compatible custom ROM and that i did using CPU-Z App then i tried to find compatible ROM but i don't know how to relate the chipset information to find custom ROM and what all are the things i need to check before proceed, So can anyone guide me in below please ?
1. Were i can find the custom ROM like CyanogenMod or similar which can be installed on my Android stick?
2. If i found one then what will be the steps to install it?
3. How take a backup of my firmware/OS so that if anything go wrong then i can restore?
My stick is rooted.
----------------CPU-Z App Summry-----------------------
Brand- leoxsys
Device Manufacturer- Unknown
Model ID- Xoro T1S
Android Version- 4.0.4
Kernel Version- 3.0.8
SoC (Processor) Architecture- ARM (armv7l)
SoC Model- Allwinner A13
SoC Family- 1x ARM Cortex-A8 @960 MHz
Frequency- 1008 MHz*/ Min: 30 MHz - Max: 960 MHz
Main CPU- Cores 1 Cores / 1 Threads
Process- 45 nm
CPUID 41.3.7.C08.2
Revision- R3P2
Features- SWP HALF THUMB FASTMULT VFP EDSP NEON VFPV3
Bogomip-s 1001.88 MIPS
SoC Manufacturer- ARM
SoC Model- Mali-400 MP
OpenGL- Ver. 2.0
RAM- 844 MB (1 GB)
Flash- 503 MB
Thanks
sDas
Click to expand...
Click to collapse
any assistance will be appreciated
Specifications show on my phone using CPUZ
MediaTek MT 6580 1.30GHz
Cores 4
Architecture 4x ARM Cortex-A7 @ 1.30 GHz
Clock Speed 604MHz -1.30 GHz
GPU Vendor - ARM
GPU Renderer Mali - 400 MP
Model - MN4A2ZP/A (iPhone8)
Hardware - MT6580
Screen Size :4.59 in
Screen Resolution 540 x 960 pixels
Screen Density 240 dpi
Total Ram 459 MB
Internal Storage 1.70 GB
Android Version 5.1
API Level 22
Bootloader unknown
Build ID LMY47I test - keys
Java VM ART 2.1.0
OpenGL ES 2.0
Kernel Architecture armv7I
Kernel Version 3.10.72(1516183499)
Root Access No
As the title say i been looking for a week to install some custom firmware on my chinese android tablet
the specs of the tablet itself are those. i am using cpu- Z if these are fake please teach me how to root the tablet to get the real info
Cores 4
architecture 4x ARM Cortex-A7 @1.30ghz
revision r0p5
clock speed 768MHz -1.30 GHz
gpu vendor ARM
Gpu Renderer Mali-T820
Gpu Load 0% right now
Model HTC 10 (M10)
Brand Pritom
Board sp773e_1h10
screen resolution 1280 x 800
screen density 290 dpi
total ram 2gb
internal storage 32gb
release date 2016-05 01
Android version 10
Api level 29
Security patch level 2020-09-01
Bootloader unkown (used developer mode to unlock it)
Build id M10_7731E_10.0_US_20230104
Java VIM ART 2.1.0
OpenGL ES 3.2
Kernel Architecture armv7l
Kernel version 4.14.133(20201031)
Root acces No
Just wanted to get better performance since android 10 works pretty bad with 2gb of ram even with unbloater and device optimization
thx for your time
I have the same wonder. Interestingly found the firmware or not?