Related
7.1.1 touchwiz rom!
Bugs:
VoLTE
Battery life (rom not optimized)
Camera (rear and front)
Flashlight (rear and front)
Proximity sensor
Bluetooth
Wifi (dont turn it off or it wont turn back on until reboot)
Radio
NFC
DOWNLOAD links:
Rom:Link removed
Kernel(flash with rom)Link removed
Earpiece fix:
https://drive.google.com/file/d/0B5kjC9svR0hPRktNOFB4dnZEblU/view?usp=drivesdk
Kernel source:LINK REMOVED AS IT IS NOT THE KERNEL SOURCE
Telegram group:
TW 7.1.1
https://t.me/kosriou711
This Rom is only for J500FN or is it for other models also like J500F??
I think u just direclty booted tab to j5 so all bug.....
Disclaimer:
Code:
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
You are NOT authorized to take, modify, upload ANY file or the whole ROM without my permissions.
Rom Info:
Based on Latest Stock Firmware of J5 2016
build: J510FNXXU2BRD4 firmware
Security Patch: 01 -April-2018
Apps like Samsung Pay might not work as Knox 1x0
Features:
-Pure Stock Rom with Added Essential Features
-Android 7.1.1 Samsung Experience 8.5
-Root choice in Aroma
-Deodexed
-Zipaligned
-Debloated
-DeKnoxed
-System status Official
-Extremely Fast & Stable
-Enabled Call Recording and extra features
-Much faster than Stock Marshmallow
-Tweaked for best performance in J5 2015
-Safety Net passed
-voLTE Supported
-Powered by Leviathon Kernel B2 by Bulgaricus
Installation:
Code:
1. You should have 6.0.1 based firmware
2. Install Recovery with Support Aroma (TWRP latest Recovery)
3. Download the ROM (Fix, etc) and copy it to your sd card.
4. Enter in Recovery and make wipes (Recommended Full wipes)
5. After follow the instructions of the Aroma Installer
6. Select addons in aroma
7. Select your model in aroma.
8. Wait 10 to 20 minutes (First start of installation, slight delay)
9. Configure and enjoy the pure Nougat Stock ROM
Leviathon Powers. You play and develop.
This is my first attempt at porting roms so please be kind..
Download HERE:
Serenity Edition v6.0
Flash Gallery Fix Just after flashing ROM from here: Post 1126
If you encounter com.android.phone force close, Flash this zip: Phone FC fix
Only for J500H model: Mobile Data fix
Note: In case you're updating from previous versions, make sure you have more than 1 GB free space in data. Clean Flash is recommended though.
Recommended Kernel: Serenity Kernel v1.5 for all models. (Battery Improvements) Update!
Telegram Group for discussion: Link
Old Version:
J516 Port Serenity Edition v5.6
J516 Port Serenity Edition v5.5
Recovery for flashing:
Aroma supported TWRP Recovery 3.2.1
Bugs and Issues:
Code:
-None
ChangeLog:
Version 6.0
-Rebased to [J510XXBRD4] (April Security Patch)
-Updated All Apps
-Fully Deodexed
-Added SmartCapture (thanks to @By Zonik)
-Added Live Messages(Addons)
-Added Lite_VideoTrimmer(Samsung)
-Default kernel switched to Leviathon B2(Camera Focus Noise)
-Tweaks for faster InCallUI load
-Overall Smoothified
-Updated Magisk to v16.4
Version 5.6
-RAM Management improved greatly
-Slight Debloat (Thanks to Mitko)
-J500FN RIL fixed
-Enhanced Keyboard with Transliteration (Thanks to @Amijaz)
-Updated Magisk to v16.0
Version 5.5
-Updated All Apps
-Updated base to BRA7
-New kernel SuperNova
-No Focus noise (Fixed by @Bulgaricus)
-Performance and Battery Improved
-Updated Magisk to v15.3
-Removed Panic Mode (triple press power button)
-Fixed Contacts crashing at blocking contact
-Some system apps Odexed for speed
-Slightly More Space in data
-Added J500G variant
Version 5.0
-Fixed Video Recording (From J7 Snapdragon variant)
-Removed unnecessary J500H libs causing RIL issues
-Updated Magisk to v15.2
-Optimized Stuff
Version 4.5
-Fixed Location GPS related problems
-Fixed Magisk related heating issue in kernel
-Tried J5H data fix Again
-Added MultiWindow Popup View
-Updated Magisk to v15.1
-Switched to B2 kernel due to better performance
-Maybe more
Version 4.1
-Revised Changes
-Fixed lagging introduced due to wrong config
-Zram now 512MB
Version 4.0
-More Debloat
-Possibly Fixed J500H Mobile data bug
-Tap on Clock to lock in SystemUI
-System status now Official in settings
-RAM Management Improved (Stock like)
-Battery Improvements
Version 3.5
-Fixed Aroma
-Added SCloud and Finder in addons
-Fixed Messaging in Jio SIM
-Fixed voLTE
-Performance Improvements
-Battery Improvements
-RAM Management Improvements
-Slightly Debloated
-Added Camera Fix in ROM
-Fixed Samsung Cloud
-Enabled Google Assistant
-Added SuperSU option in Aroma
-Added Secret Test Menu
-Added some more features
-Added SPowerPlanning
-Added AnimatedGif in Camera
-Added Capture Screen and Record Screen toggle
-Added J500H in devices (Mobile Data Bug)
Version 2.5
-Fixed Camera (Video recording bug exists)
-Fixed Flashlight
-Fixed Proximity Sensor bug
-Added Floating Messages
-Added Call Recording and other CSC features
-Added UHQ upscaler in SoundAlive
-Added HDR mode in Camera
-Added addons in aroma
-Added AppLock in Settings
-Added Network Speed Meter option in Settings
-Enabled performance modes in Device Maintainance
Version 2
-Added Variant Options in Aroma
-Fixed Bluetooth (thanks to @Bulgaricus)
-Fixed Wifi Authentication (thanks to @Bulgaricus)
-Fixed voLTE
-Fixed RIL in J500FN
-Switched to Polish base
Contributors
@updesh94(me) for porting
@samsung for firmware
@Bulgaricus for awesome Custom Kernel & Fixes
@By Zonik for SmartCapture smalis
@Amijaz for enhanced Keyboard
Mitko for tweaks and Debloat tips
@osm0sis for busybox
@asc1977 for Collection of Guides & Mods
The Entire J5 Community :highfive:
If I forgot to mention you, just pm me!
Kernel source:
Serenity Kernel - Github
Leviathan - Github
Pressing the THANKS button does give me some motivation
ROM OS Version:7.1.1 Nougat Touchwiz
ROM Kernel: Linux 3.10.x
ROM Firmware Required: marshmallow 6.0.1 & TWRP Aroma Support
Based On: Official Stock ROM of J5 2016 [BRD4]
My Portfolio: http://updeshxp.github.io
Version Information
Status: Stable
Current Stable Version: 6.0
Stable Release Date: 2018-05-24
Created: 2017-11-09
Thanks for powering your ROM with LEVIATHAN and welcome! In few days the KERNEL will be very "mature" and full of feautres! Good luck
Bulgaricus said:
Thanks for powering your ROM with LEVIATHAN and welcome! In few days the KERNEL will be very "stable" and full of feautres! Good luck
Click to expand...
Click to collapse
Waiting for j500m variant [emoji869][emoji7]
Enviado desde mi SM-J500M mediante Tapatalk
Our Galaxy J5 15 has the chance to shine for another year now!!
I will be reporting as soon as i flash the rom, here it is 1 am and i have work at 6am but who cares xD
Ragazzza said:
Our Galaxy J5 15 has the chance to shine for another year now!!
I will be reporting as soon as i flash the rom, here it is 1 am and i have work at 6am but who cares xD
Click to expand...
Click to collapse
and from what I remember, people were saying this device is dead! :laugh:
J500M
Booting up! If work I will confirm later
PT-BR: AE MOÇADA, TA INICIANDOOO! TOMARA QUE TEJA FUNFANDO
---------- Post added at 10:52 PM ---------- Previous post was at 10:36 PM ----------
J500M! CONFIRMED! IT WORKING GOOD!
I'm blessed to have this rom!
thx for all
Please j500m waiting for this [emoji7][emoji106]
Enviado desde mi SM-J500M mediante Tapatalk
dixmer1998 said:
Please j500m waiting for this [emoji7][emoji106]
Enviado desde mi SM-J500M mediante Tapatalk
Click to expand...
Click to collapse
J500M is working bro. I'm using now.
pedro_pandolfi said:
J500M is working bro. I'm using now.
Click to expand...
Click to collapse
But [emoji32] how? This rom is for j500fn/n? The kernel is for j500fn/n [emoji23][emoji23]
Enviado desde mi SM-J500M mediante Tapatalk
dixmer1998 said:
But [emoji32] how? This rom is for j500fn/n? The kernel is for j500fn/n [emoji23][emoji23]
Enviado desde mi SM-J500M mediante Tapatalk
Click to expand...
Click to collapse
It's same device bro. Is the same hardware!
Screenshots
https://drive.google.com/drive/folders/1VPa3Lgd_aRjvYQPHwQIl897x1M8xTFMj?usp=sharing
pedro_pandolfi said:
It's same device bro. Is the same hardware!
Screenshots
https://drive.google.com/drive/folders/1VPa3Lgd_aRjvYQPHwQIl897x1M8xTFMj?usp=sharing
Click to expand...
Click to collapse
Ohh ok j500m? Sure ?
Enviado desde mi SM-J500M mediante Tapatalk
Just tried the rom on my FN version. I flashed the rom, and after that i flashed bulgaricius's kernel for FN.
It took about 5 minutes to boot, and right after the boot the default language is Russian, and immedietly there were errors saying com.sec.phone... has stopped working,after i close that error, same error pops up right after one second, so i had to freeze that service in order to use the phone properly.
Cellular Data is not working,at least not for me
Wi-fi is working great, it even remembers the password that i entered, even after reboot.
Now i am no expert, but i mentioned that the default language was Russian, so that means that the ported firmware is Russian? and somewhere in J5 2016 Nougat thread someone mentioned that Russian firmware is super buggy and that person also stated that he kept seeing processes stopped errors n Russian firmware so can this be related?
Anyway, beside that ROM is... i have no words, it is so much beter than either LL or MM.
Super but really super fast,perfomance is great, and it also looks so nice.
I had to go back to MM because i need to make some calls at morning at work, but i have to tell you coming back to MM from this ROM feels like dying xD
Anyyway thank you guys for this brilliant rom.
:good::good::good::good:
Ragazzza said:
Just tried the rom on my FN version. I flashed the rom, and after that i flashed bulgaricius's kernel for FN.
It took about 5 minutes to boot, and right after the boot the default language is Russian, and immedietly there were errors saying com.sec.phone... has stopped working,after i close that error, same error pops up right after one second, so i had to freeze that service in order to use the phone properly.
Cellular Data is not working,at least not for me
Wi-fi is working great, it even remembers the password that i entered, even after reboot.
Now i am no expert, but i mentioned that the default language was Russian, so that means that the ported firmware is Russian? and somewhere in J5 2016 Nougat thread someone mentioned that Russian firmware is super buggy and that person also stated that he kept seeing processes stopped errors n Russian firmware so can this be related?
Anyway, beside that ROM is... i have no words, it is so much beter than either LL or MM.
Super but really super fast,perfomance is great, and it also looks so nice.
I had to go back to MM because i need to make some calls at morning at work, but i have to tell you coming back to MM from this ROM feels like dying xD
Anyyway thank you guys for this brilliant rom.
:good::good::good::good:
Click to expand...
Click to collapse
HEY, Wait, for your FN u have to flash the specific kernel in Leviathan post... Check this out.
In my J500M cellular data works good, the only two bugs is, wifi not saving passwords and bluetooth... (wifi is fixed in source, waiting new version of kernel...)
Oh yeah, wipe all in recovery, including internal...
Flashlight don't work
Wifi forget password after reboot
(J500M)
J500M ?? Vr 2015 ????
Working on j500h??
pedro_pandolfi said:
Booting up! If work I will confirm later
PT-BR: AE MOÇADA, TA INICIANDOOO! TOMARA QUE TEJA FUNFANDO
---------- Post added at 10:52 PM ---------- Previous post was at 10:36 PM ----------
J500M! CONFIRMED! IT WORKING GOOD!
I'm blessed to have this rom!
thx for all
Click to expand...
Click to collapse
Opa kkk o seu é o J500M? Como tá a ROM a
Guys hw about the speed , performance, free ram, free storage, battry ?
Fix volte nogout rom
popup every 30s
"com.android.phone has stopped."
can't make phone calls. - no network no IMEI.
no IMEI after restoring NFS folder from working slim 7.1.1
--
no phone calls after flashing Leviathan. https://forum.xda-developers.com/devdb/project/?id=20065#downloads
--
battery no longer charges from 0 to 100 in 2 hours like in stock 5.1.1 or 6.0 or Slim 7.1.1
--
I also had no calls & no IMEI on Lineage 14.1 / 7.1.2. Please point me to the fix if this is common for J500f on 7.1.2 ROMs.
arnova has relesed new gcam update in which night mod have been fixed
And green tint on front camera has been removed
Cam credits : arnova (gcam)
CHANGELOG:
- Fixed motion focus
- Fixed Motion photo
- Night Sight and Photobooth Works on Oreo
- Faster than previous versions
I HAVE TRIED IT ON MU ASUS MAX PRO M1
I HAVE ATTACHED SOME SAMPLE SHOTS
DOWNLOADS LINK:https://drive.google.com/file/d/10rTDE-qGm06mTD5cO18g7MrRrCSeobnT/view
Link 2:https://www.celsoazevedo.com/files/android/google-camera/f/GCam_Pixel3Mod_1.3_build.6.1.021.apk
FEATURES:
HDR+ : ( HDR+ Off since version 5.3 it doesn't work)
--- Back : Enhanced, ON ( Oreo /Pie )
--- Front : Enhanced, ON ( Oreo /Pie )
- Portrait Mode :
--- Back : Works ( Oreo /Pie )
--- Front : Works ( Oreo /Pie )
- RAW files :
--- Back : Works ( Oreo /Pie )
--- Front : Works ( Oreo /Pie )
- Video :
--- Back : 1080P/AUTO/30FPS/60FPS, 4K/30FPS ( Oreo /Pie )
--- Front : 1080P/AUTO/30FPS/60FPS ( Oreo /Pie )
- Flash :
--- Back : OFF, Auto, Forced ( Oreo /Pie )
--- Front : OFF, Auto, Forced ( Oreo /Pie )
- Night Sight :
--- Back : Works ( Oreo /Pie )
--- Front : Works ( Oreo /Pie )
- Motion photo :
--- Back : Works ( Oreo /Pie )
--- Front : Works ( Oreo /Pie )
- Top Shot :
--- Back : Works on custom rom with GooglePhotos (Daydream) ( Oreo /Pie )
--- Front : Works with GooglePhotos (Daydream) ( Oreo /Pie )
- Timer : Works ( Oreo /Pie )
- Face retouching : Works ( Oreo /Pie )
- Motion Auto Focus : Works ( Pie
NIGHT MODE WERE GOOD AND EVERTHING WORKS FINE
PORTRAIT WERE WORKING FINE
JUST GIVE A TRY
CREDITS: @arnova
front (selfie) camera not working on all mode,even on normal mode..max pro 3gb ram..
valenrock said:
front (selfie) camera not working on all mode,even on normal mode..max pro 3gb ram..
Click to expand...
Click to collapse
Sir 3 gb ram not supporting 6.0.21 please try 6.0.13 which is working fine
13 isn't working fine on 3gigs variant. Maybe we'd need to wait
Yes front not working on 3gb varient
Front cam not working properly on all mode. Still has green effect. 4gb variant.
lanisshrup said:
13 isn't working fine on 3gigs variant. Maybe we'd need to wait
Click to expand...
Click to collapse
Yes 3gb varient developer are less
paramparmatma said:
Yes front not working on 3gb varient
Click to expand...
Click to collapse
Sir u need to wait for a stable version
Tongkayla said:
Front cam not working properly on all mode. Still has green effect. 4gb variant.
Click to expand...
Click to collapse
This works on 6gb varient didn't test on 4gb varient
3gb variant. The viewfinder is very laggy. There are not such issue on 6.0.13 version. So means the issue can be fixed. Hopefully the next version will be good.
lanisshrup said:
13 isn't working fine on 3gigs variant. Maybe we'd need to wait
Click to expand...
Click to collapse
paramparmatma said:
Yes front not working on 3gb varient
Click to expand...
Click to collapse
Yes they will be fixed letz wait
Front camera not working, but rear camera no probs
Max pro m1 4gigs ram
egha5037 said:
Front camera not working, but rear camera no probs
Max pro m1 4gigs ram
Click to expand...
Click to collapse
Use this if good camera working camera comes i will say u
guhanhifi said:
Yes they will be fixed letz wait
Click to expand...
Click to collapse
I kinda don't understand what difference does 1 more gig of ram would make in development...
Yeah waiting with patience
lanisshrup said:
I kinda don't understand what difference does 1 more gig of ram would make in development...
Yeah waiting with patience
Click to expand...
Click to collapse
Software and firmware
guhanhifi said:
Sir 3 gb ram not supporting 6.0.21 please try 6.0.13 which is working fine
Click to expand...
Click to collapse
According to you which is the most stable port of gcam for 3gb version. If you don't mind pls provide link
Using 3gb variant rear camera working perfectly...back camera working but have green tint
Hazimx9 said:
Using 3gb variant rear camera working perfectly...back camera working but have green tint
Click to expand...
Click to collapse
Better use gcam 5 version
Working very well in 6GB variant
If your viewfinder is slow, disable "dirty lens"
Dronzerr said:
Working very well in 6GB variant
If your viewfinder is slow, disable "dirty lens"
Click to expand...
Click to collapse
Yes do IT
Anx Camera for custom ROMs [ DEPRECATED ]
PS: Use Mi camera new port from second post.
Android 12 & 12L
Download:
- v7.0
Android 13
Download:
- v7.1 ( working on Pixel Os except 48MP)
- v7.2 ( working on many roms )
1. Flash miui camera magisk module.
2. Reboot.
3. Enable Permissions in App Info if launching the app at first does not ask for any permission (Camera, Files, Location, Microphone).
Changelogs:
09.09.2022
• Fixed slow motion along with 48MP mode.
• Fixed Portrait mode + filters along with wide/uw/macro lens.
• Enabled documents, Night, short video, time-laps, long exposure and clone modes.
• Enabled and edited watermark as "SHOT ON REDMI NOTE 10 AI QUAD CAMERA".
18.09.2022
• Fixed portrait again on some Roms.
• Fixed HDR mode on back camera.
• Fixed broken zoom ( green screen ).
17.10.2022
• Upgraded to v7.2 and dropped A12 builds.
• Fixed 48MP on A13 ( thanks to @Anush02198 for help).
• Fixed front portrait.
• Removed front slow motion button ( was causing crashes ).
• Removed scanner miui app and fixed Document option.
AEonAX link
AnxCamera wiki
Thanks to:
AEonAX, SonalSingh18 and AMRGAMAL1
New Mi Camera port [ magisk module]
Version 4.3
Build date : 18-11-2022
For mojito A13 Custom Roms
Mi Camera magisk module:
➥ Download [Gdrive]
Instructions:
• Delete any anx / miui camera magisk modules if there is already.
• Flash via magisk manager Mi Camera magisk module and reboot to system.
• If necessary, flash 48MP fix magisk module according to android security patch then reboot to system ( uninstall 48MP fix if you get "can't connect to camera").
48MP fix for android 13 magisk module (November 2022 security patch and previous):
➥ Download [Gdrive]
48MP fix for android 13 magisk module (+December 2022 security patch):
➥ Download [Mega]
48MP fix for android 12 magisk module:
➥ Download [Gdrive]
Changelog:
• Optimized for mojito.
• Added necessary vendor libraries.
• Unnecessary codes removed.
• Experimental features unlocked.
• Enabled Night, 48MP, Short video, Panorama, Documents, VLOG, Time-Laps, Slow motion, Movie Effects, Ai Watermark, Custom Watermark, Clone modes..
15-12-2022
• added new 48MP fix for December security patch.
29-12-2022
• Removed parallel processing from experimental features.
• Switched to platform keys.
• Fixed few sepolicy rules.
11-06-2023
• Fixed timed burst in pro mode.
• Fixed back portrait in some ROMs.
• Removed experimental features and its annoying message.
• Switched to original mi camera icon.
• Added monet support (only in camera settings for now).
• Fixed parallel-processing on Android 13 (by ceracz)
• Set default HDR mode to Auto (by ceracz).
• Dropped stock camera provider (by ceracz), so no need to 48MP fix.
19-06-2023
• Fixed blur in background on portrait mode.
Notes:
• ROMs builders should add this commit, to fix front camera & portrait issues if it is not included in rom source: https://github.com/SpiceOS/android_bionic/commit/e1b0c860ea4dfc74cf9c016812b0d3aea315b1d0
• For those who want include Mi Camera on their builds, use this repo, this commit and this commit.
• To fix 48mp from source add this commit:
https://review.lineageos.org/q/topic:twelve-camera-privapp
• Don't use spoofing module like Dolby Atmos or Pixel props .. Otherwise they will affect camera functionallies.
Thanks to:
AmrGamal, Ceracz ,Praditia Nur, Anush,
Anx team and all testers.
Do you have MIUI gallery?
ibanezred16 said:
Do you have MIUI gallery?
Click to expand...
Click to collapse
This apk worked for me:
Google Drive - Download warning
drive.google.com
Disable Force Encryption for
Mojito / oss vendor :
Usage:
1- Comming from encrypted rom
- Flash the new encrypted ROM
- Flash ofox
- Reboot to ofox
- Flash decrypt zip
- Format data
- Reboot system
2- Comming from decrypted rom
- Wipe data/dalvik/cache
- Flash the new encrypted ROM
- Flash ofox
- Reboot to ofox
- Flash decrypt zip
- Reboot system
Notes:
• This zip decrypt your data.
• This zip won't decrypt data on stock vendor.
• This zip won't decrypt data on erofs Roms.
• Flash it everytime after flashing new rom.
• Decrypted DATA = LESS SECURE device.
Working Fm radio as magisk module:
For A12 and A13 (most latest a13 roms don't have FM radio app).
- Flash the module via magisk
- Reboot to system
Increase sawp (ZRAM) from 2Gb to 4Gb
installation:
- Go to ofox recovery
- Flash attached zip
- Reboot to system
Ps:
Some roms have limited vendor partition size and RO, so they don't accept fstab.zram file modification or decryption.
Don't flash this zip on Roms having Neternels kernel as it has by default 4gb vbswap.
KProfiles modes (only for neternels kernel) :
Switch between battery , balanced and performance modes (manual or auto) using KProfiles app ( settings / battery / or using qs tile ).
- Flash Kprofiles magisk module.
- Reboot.
- Tested and worked on many a12L/a13 roms.
Ps:
It won't work on Roms using non-Neternels kernel.
Hami_Do said:
Working Fm radio as magisk module:
For A12 and A13 (most latest a13 roms don't have FM radio app).
- Flash the module via magisk
- Reboot to system
Click to expand...
Click to collapse
This is a great achievement. Weldone Hami_do
Hami_Do said:
• This zip won't decrypt data on stock vendor.
• This zip won't decrypt data on Roms having RO vendor.
• This zip won't decrypt data on erofs Roms.
• Flash it everytime after flashing new rom.
• Decrypted DATA = LESS SECURE device.
Click to expand...
Click to collapse
Unlike the classic method which decrypts data at vendor fstab level, the new method can decrypt data even on RO roms such as erofs roms.
Soon i will let you know how..
Edit:
Last time I have decrypted successfully Arrow Os A13 erofs (Read Only ROM) using dfe-neo from here :
[A/B][A-ONLY][SCRIPT][READ-ONLY][EROFS][ANDROID 10+] Universal Disable Force Encryption for RO and RW "NEO STABLE"
Disable Force Encryption NEO Do you all know what DFE is? no? Anyway. Basically, your device has an encrypted data section "/data" by default. Let's look at the advantages of google's solution that we will lose after disabling encryption: -...
forum.xda-developers.com
thanks for the miui camera port
All works great with both 12 and 13 beta.
Just had to disable some pixel props on magisk for the camera port to work flawlessly.
Thanks.
Has anyone tried the flashable anx camera on pixel os a12?
devcon69 said:
All works great with both 12 and 13 beta.
Just had to disable some pixel props on magisk for the camera port to work flawlessly.
Thanks.
Click to expand...
Click to collapse
Can you show which pixel props to disable?
Mthw said:
Has anyone tried the flashable anx camera on pixel os a12?
Click to expand...
Click to collapse
Since PixelOS uses read only filesystem (erofs) it might not even be possible to flash stuff there.
Anyone tested anxcamera for GSI a12L with wcsf kernel on their mojito devices?
pihpih95 said:
Anyone tested anxcamera for GSI a12L with wcsf kernel on their mojito devices?
Click to expand...
Click to collapse
Not with WCSF but tested on Neternels. Selfie and portrait mode crashes.
Samir2298 said:
Not with WCSF but tested on Neternels. Selfie and portrait mode crashes.
Click to expand...
Click to collapse
I see, thanks for the information i think i will try anxcam with WCSF later and report it back here
Mthw said:
Since PixelOS uses read only filesystem (erofs) it might not even be possible to flash stuff there.
Click to expand...
Click to collapse
Flashing files directly in system you can't on erofs i agree, but flashing magisk modules on erofs is possible , there is no problem.
----
@pihpih95 I think same issues on neternels you will find them on WCSF..
except if you want try it on a12 , try PLC version ( prebuilt libcameraservice ), because my anx a12 module has a prebuilt libcameraservice.
And if you want try WCSF on a13 , try NPLC because there is no libcameraservice in my anx a13 module.
Hami_Do said:
I think same issues on neternels you will find them on WCSF..
except if you want try it on a12 , try PLC version ( prebuilt libcameraservice ), because my anx a12 module has a prebuilt libcameraservice.
And if you want try WCSF on a13 , try NPLC because there is no libcameraservice in my anx a13 module.
Click to expand...
Click to collapse
i found that whenever i record the video , it is not save to any of my storage , how to overcome this problem ? im using WCSF-PLC latest on AncientOS GSI,taking picture just fine , im using port v7 anxcam
Hey, I tried to install anx camera module i have flashed the three files
-Miui Core Module
-ANX camera unity 190R (bountifuldistanthapkuna)
-ANX RN10 addon
After successfully installing all these modules anx camera app says Cannot connect to camera. Even all other apps show a black screen when accessing camera but no privacy indicator is shown if camera is being accessed.
_.ebin.__ said:
Hey, I tried to install anx camera module i have flashed the three files
-Miui Core Module
-ANX camera unity 190R (bountifuldistanthapkuna)
-ANX RN10 addon
After successfully installing all these modules anx camera app says Cannot connect to camera. Even all other apps show a black screen when accessing camera but no privacy indicator is shown if camera is being accessed.
Click to expand...
Click to collapse
try micamera by hamido (on crdroid have front camera and portrait issues which hopefully will be fixed on the next update)
Useful mods for custom roms //mojito//
Anx Camera for custom ROMs [ DEPRECATED ] PS: Use Mi camera new port from second post. Android 12 & 12L Download: - v7.0 Android 13 Download: - v7.1 ( working on Pixel Os except 48MP) - v7.2 ( working on many roms ) 1. Flash miui camera...
forum.xda-developers.com
try rebooting your phone too
anx old versions never worked for me