Related
THANKS:
shminer: For his repository
eoghan2t7: For his repository
Mentalmuso: For his repository
savoca: For the invaluable KCAL
USA-RedDragon: For his repository
nathanchance: For his pre-merged sources
TheCrazyLex: And developers of AOSPA, grabbed lots from there
emdroidle: For his work with rooting, and kernel patches
eng.stk: For his blu_active governor, and inspiration
frap129: For his Maple scheduler, and repository
alucard_24: For his governor, and G5 repository
franciscofranco: For his many kernel patches
Lord Boeffla: For his Wakelock Blocker etc
sultanxda: For his many kernel patches
warBeard_actual: For his VM tweaks
neobuddy89: State notifier etc
arter97: Adreno idler etc
flar2: Adreno boost etc
And other's I probably forgot
Previous Versions:
Features:
1.4
Linux 3.18.85
KCAL - Screen panel control
ElementalX and Zzmoove CPU governors
Modules signed and secure, as in stock rom
Disable software CRC checking of SD Card - More performance
Fix by emdroidle for eng-bootloader (US996Santa, H990 & H910)
CRC32 and CHACHA20 HW ACC, CRNG based on CHACHA20
Static screen fixed (US996Santa, H990 & H910)
Many patches that improves or fixes things
Maple I/O scheduler
LZ4 compression
RCTD removed
1.5
Linux 3.18.92
KCAL - Screen panel control
Alucard, and blue_active (by eng.stk) Governors
Fix by emdroidle for eng-bootloader (US996Santa, VS995, H990 & H910)
Integrated Virtual Memory tweaks (war_mod) and Blu_active settings into ramdisk
Many work-queues converted to *system_power_efficient_wq*
Static screen fixed (US996Santa, VS995, H990 & H910)
Patches from CAF mostly, to various subsystems
Support for UAC2 external DAC
Boeffla Wakelock Blocker
Maple I/O scheduler
Adrenoboost
On/Off Fsync
Adreno Idler
1.5.6 BETA
Linux 3.18.102
KCAL - Screen panel control
blu_active (by eng.stk) cpu governor
Integrated memory tweaks (war_mod), and blu_active settings into ramdisk
Many threads converted to *system_power_efficient_wq*
Toggle USB2 900mA Fast-Charge on/off
Support for UAC2 external DAC
Static screen and modem fix
Maple I/O scheduler
Toggle Fsync on/off
Adreno Boost
Adreno Idler
WireGuard
BTTF (Rebased kernel exclusively for V20, closer to stock)
KCAL - Screen panel control
blu_active (by eng.stk) cpu governor
Integrated blu_active settings into ramdisk
Alucard, Nightmare & Darkness cpu governors
Toggle USB2 900mA Fast-Charge
Boeffla Dynamic Sync Control
Boeffla Wake-Lock Blocker
Engineering ABOOT fixes
RCTD/Triton disabled
Maple I/O scheduler
DriveDroid support
WireGuard
Download: Nougat V20
Download: Nougat V20 (BETA)
Download NEW! "Back To The Future" Minimal build (Recommended): BTTF (Nougat)
Download NEW! "Back To The Future" Minimal build: BTTF (BETA)
Anyone is free to include it in their ROM as they like
Compiled with GCC Linaro 7.3.1
[2.1] Features:
Linux 3.18.134
SultanXDA's CPU Boost
KCAL - Screen panel control
Backported kernel improvements
Toggle USB2 900mA Fast-Charge
Boeffla Dynamic Sync Control
Boeffla Wake-Lock Blocker
Various patches and fixes
Engineering ABOOT fixes
RCTD/Triton disabled
Maple I/O scheduler
DriveDroid support
Modules disabled
WireGuard
Download: Oreo V20 Folder
The (AnyKernel2) flashable zip will flash kernel as well as /system/lib/modules. If you want to go back you should backup modules as well
Notice: I don't own a V20, thus I can't guarantee it will be a sane and bug-free kernel for V20 users.
Sources:
https://github.com/stendro/msm8996_lge_kernel
LGH830SV_LGH830TN_Android_Oreo_v30c.zip - From http://opensource.lge.com
Questions
Q: Will this work on newer bootloaders?
A: It should. The kernel is based on the most recent of LG sources.
Q: What control app do you suggest using?
A: I suggest using SmartPack, or EX Kernel Manager.
Q: I have US996, what version do I use?
A: If you unlocked officially through LG then use "US996", otherwise use "US996Santa".
Q: Where can I donate? I want to donate!!
A: I don't accept donations because of two reasons. One: I don't really need it. Two: I like the idea of this being totally free, it adds to the enjoyability of the kernel.
Q: I'm having some problems with kernel not working or booting?
A: If you are on an older bootloader then that is likely why. My kernel works on new firmware, not exactly sure how far back the compatibility goes.
Q: I flashed this zip in recovery, but it didn't seem to work, I'm still on my old kernel. What can I do?
A: With AnyKernel you shouldn't need to re-flash ROOT after flashing kernel (if already installed, if not, do it before flashing kernel). SuperSu has been known to revert the kernel install if you do so.
Q: OK so I just rooted my phone and installed this, and OMGOSH! so excited, now what do I do - do I tweake-dy freak out huh huh? How do I do it??
A: Put simply, don't do anything. I don't know how things where in the past, but now you don't need to do anything. Not with this kernel anyhow. Such thing are better discussed in a separate thread anyway.
You say you added TCP and schedulers. Mine are all still the same basic on my h918
Thanks for your time in getting this together for us.
storm68 said:
You say you added TCP and schedulers. Mine are all still the same basic on my h918
Thanks for your time in getting this together for us.
Click to expand...
Click to collapse
Hey there
It's enjoyable for me too to be doing this, at least for now Learning new stuff, and I can use the result for my G5 as well :good:
You must choose your settings with Kernel Adiutor or similar program. The defaults are the same as stock I believe.
Seems to work OK on US996, seems to be running a little warm, but that could be from installing Color Control and aduiator in addition to some updates as soon as it booted. I'm letting it sit now and see how it runs normally.
Color Control is working great.
Got 151170 in Antutu
Oh, and it does have static on boot on the US996 non UCL.
Hey! Does this work on H918, on software version 10q? I have root and TWRP on it but I've heard that because of the anti-rollback thing the older kernel's won't work
One of his sources shows the 10q Kernel, I only show a version number on my us996, but it shows 3.18.31
Silentwidow said:
Got 151170 in Antutu
Oh, and it does have static on boot on the US996 non UCL.
Click to expand...
Click to collapse
Hey
I don't benchmark, is that a good score?
I have received report about that problem with static on US996.
I must have misunderstood. So users with Unlocked version still use the engineering aboot ?
If so it's an easy fix.
@askermk2000 unlocked US996 can use either root method (unlock bin from LG or DirtyCow / eng. aboot).
I am guessing most use the eng. aboot since LG makes you "sign" a click through that says your warranty is void.
@MysteriousAnon ARB has nothing to do with the kernel (boot image). However, most newer kernels won't boot on older firmware, and vice-versa, older kernels won't boot on newer firmware. Nonetheless, if you DO boot a newer kernel on older firmware, it doesn't increment ARB. ARB is incremented by the bootloader...
EDIT: tagged the wrong person. Sorry...
-- Brian
@askermk2000 I am not sure to be honest, I don't know about aboot lol, I unlocked using the LG tool.
---------- Post added at 09:54 AM ---------- Previous post was at 09:54 AM ----------
askermk2000 said:
Hey
I don't benchmark, is that a good score?
I have received report about that problem with static on US996.
I must have misunderstood. So users with Unlocked version still use the engineering aboot ?
If so it's an easy fix.
Click to expand...
Click to collapse
For what I've gotten in the past on this phone, it's a great score, I normally get around 141k.
Silentwidow said:
I am not sure to be honest, I don't know about aboot lol, I unlocked using the LG tool.
Click to expand...
Click to collapse
Ok then, you did as I expected, and in theory (that I've gathered) the US996 non UCL should be the one for you. But since you get static with that, then that can only mean one thing: The engineering US996 bootloader, and production bootloader is the same with regards to how it initializes the LCD panel.
Well then, I guess I only need to support one US996 model.
How is the ucl version working for you; all right?
askermk2000 said:
Ok then, you did as I expected, and in theory (that I've gathered) the US996 non UCL should be the one for you. But since you get static with that, then that can only mean one thing: The engineering US996 bootloader, and production bootloader is the same with regards to how it initializes the LCD panel.
Well then, I guess I only need to support one US996 model.
How is the ucl version working for you; all right?
Click to expand...
Click to collapse
I haven't tried it, am I able to use the UCL version on the non UCL?
Silentwidow said:
I haven't tried it, am I able to use the UCL version on the non UCL?
Click to expand...
Click to collapse
I think so, that way you will not have static boot.
Next release I'll make it so that both version's won't have static boot.
The only difference between them is static fix (both will have next time) and changes to cmdline, which is not necessary if you simply have officially unlocked US996.
MysteriousAnon said:
Hey! Does this work on H918, on software version 10q? I have root and TWRP on it but I've heard that because of the anti-rollback thing the older kernel's won't work
Click to expand...
Click to collapse
Can u pm me and tell me how to root h918 10q please
Sent from my LG-H918 using XDA-Developers Legacy app
gavilan2010 said:
Can u pm me and tell me how to root h918 10q please
Sent from my LG-H918 using XDA-Developers Legacy app
Click to expand...
Click to collapse
The only way to have root on 10q is to have rooted an 10j or below, then update to 10q with only the correct partitions so you don't lose root. If you are on full blown 10q out of the box or updated a stock phone to it, then there is no root for it.
androiddiego said:
The only way to have root on 10q is to have rooted an 10j or below, then update to 10q with only the correct partitions so you don't lose root. If you are on full blown 10q out of the box or updated a stock phone to it, then there is no root for it.
Click to expand...
Click to collapse
Thanks yes i just gat this phone brand new and the firmware is 10q and they say u cant downgrade to early one right thanks for u anwser
Sent from my LG-H918 using XDA-Developers Legacy app
askermk2000 said:
I think so, that way you will not have static boot.
Next release I'll make it so that both version's won't have static boot.
The only difference between them is static fix (both will have next time) and changes to cmdline, which is not necessary if you simply have officially unlocked US996.
Click to expand...
Click to collapse
The UCL kernel did not fix my static boot.
Exactly how do you flash this. I'm running NATF Megarom V20 v4.0 ATT on h910. Software version H91010l? Thanks. I would love to not have the static at boot. Just flash in TWRP and would I then flash SuperSU again/ ?
I flashed the UCL version and the static is gone.
Awesome!
PS. I'm using the eng. aboot. and 10k stock firmware
runningnak3d said:
unlocked US996 can use either root method (unlock bin from LG or DirtyCow / eng. aboot).
I am guessing most use the eng. aboot since LG makes you "sign" a click through that says your warranty is void.
-- Brian
Click to expand...
Click to collapse
Ah yes, makes sense.
Probably no point in maintaining two versions. Unless there's been some very confusing misunderstanding - Both US996 versions should use the *static fix*. Good! Makes it easier to maintain this thread :good:
Hi, all XDA members, I built a light-weight kernel for our little monster (hammerhead).
My kernel is based on Unlegacy Kernel. I optimized the kernel for best battery life and performance balance. I tested it on AOSP Extended ROM. It should work on LOS too.
Features:
-Intelliactive governor.
-SIO scheduler.
-25mV Undervolted manually from acpuclock source code. (Only for PV2 CPUs)
-More cooler device.
You can download img from Google Drive link. Flash it via TWRP or fastboot.
https://drive.google.com/file/d/1RGqpxZJ5lJve57IJeRHZm-BjMhDGIQIy/view?usp=sharing
Source code: https://github.com/metahex/android_kernel_lge_hammerhead
Awesome, I'll test and feed you back
thanks for your work
Detail please for features? Thanks
For this build, kernel comes with intelliactive governor.
I will add some features and improvements for best battery life and performance. (In next build i will undervolt it and i will add more governors, I/O schedulers)
Changelog:
(v1.0.2)
-Kernel name banner fixed.
-25mv Undervolted for PV2 CPUs.
(v1.0.1)
-SIO is the default I/O scheduler.
Testing
Can someone confirm that kernel works with LOS?
thanks for the new kernel, but no work in DU 12.2 flashed via twrp.
Any chance you could have your kernel fix phonecall bluetooth audio? It's bugged on every custom ROM right now and it's been theorized it's a kernel issue.
rnadomuc said:
Any chance you could have your kernel fix phonecall bluetooth audio? It's bugged on every custom ROM right now and it's been theorized it's a kernel issue.
Click to expand...
Click to collapse
I will work on it in my free time.
metahex12 said:
I will work on it in my free time.
Click to expand...
Click to collapse
Here is some info on it: https://forum.xda-developers.com/go...nlegacy-android-project-t3593425/post75688720
Xaif fixed a problem with video recording, you should include it in your kernel.
https://github.com/esa-n/android_ke...mmit/45abf34f6a493b2e918b054bedeec3c4d2003900
How i should flash it?
Like "boot" or "recovery" ?
Its a kernel it goes flash it as a boot IMG
I flashed this with AEX ROM and it hung at boot
Will a custom kernel enable NTFS and exFat support on Oreo?? No ROM currently works why either of those so u can't use my external hard drives.
Flashed 1.0.2 kernel over us 8.1. The undervolt sold me! If possible, and if you're entertaining ideas, I'd greatly appreciate usb fastcharge support.
I've heard the arguments against it, but in two years I'd never had a problem.
Will it work on Nougat (Los 14.1)?
psydex said:
Will it work on Nougat (Los 14.1)?
Click to expand...
Click to collapse
no
Deteted
Is this kernel dead?
Edit: @metahex12 Can you consider adding support to Pie (Unlegacy CAF ROM)?
[size=+2]Resurrected Kernel[/size]
for the Moto G6 (codename: ALI)
####################
The purpose of this kernel is to provide a fully stable up-to-date kernel. The focus is quality over quantity, stability over every possible cherry-pick-able feature out there. However, I am open to requests and/or suggestions
####################
[size=+1]Features[/size]
+ Passes SafetyNet
+ AnyKernel2 format (more info)
+ WireGuard support (more info)
+ Disabled CRC's on data blocks (30% increase in performance)
+ Fsync On/Off support
+ Additional I/O Schedulers (Zen, FIOPS, SIO, BFQ)
+ Increased Zram compression streams
+ Tuned adrenoboost (disabled by default)
+ Advanced TCP congestion options
+ KCAL Color Control
+ Removed dm-verity on system and vendor partition
+ Boeffla wakelock blocker driver v1.1.0
+ Works same as stock (or better?)
+ More to come, stay tuned
####################
[size=+1]Downloads[/size]
+ Beta version -> Resurrected Kernel v1.0 || Oreo 8.0.0
####################
[size=+1]Installation[/size]
+ Download kernel zip
+ Reboot to twrp recovery
+ Choose INSTALL to flash kernel zip
+ Reboot and Profit!
####################
Credits
+ Motorola (for releasing kernel sources)
+ @osm0sis (AnyKernel2 template/source)
+ All commit authors in my kernel source
####################
XDA:DevDB Information
Resurrected Kernel, Kernel for the Moto G6
Contributors
Jleeblanch
Source Code: https://github.com/Jleeblanch/kernel_motorola_msm8953/tree/rk-oreo
Kernel Special Features: See description above
Version Information
Status: Beta
Current Beta Version: v1.0
Beta Release Date: 2018-09-09
Created 2018-09-10
Last Updated 2018-09-09
Please read before flashing...
[size=+2]NOTICE[/size]
As we all know, there are multiple variants/versions of the Moto G6 (codenamed ALI). I personally own the XT1925-6 variant and have tested this kernel on both firmware versions OPS27.104-15-10 (pre-ota)(march security patch) and OPSS27.104-15-10-4 (post-ota)(july security patch).
Being that this kernel uses the AnyKernel2 format and is NOT a full boot.img, my hope is that it'll work for all variants/versions. Make sure to backup your boot partition before attempting to flash this kernel that way if something goes wrong, you can easily restore your boot.img. If this kernel works for you, please lemme know what variant/version you're using so I can make note of it so users in the future can rest assured it'll work for them as well
Lastly, you will need to have flashed a "no-verity_boot.img" for your device and have TWRP installed before you can flash this kernel. In the future, this may change.
Reserved
Flashed perfectly on retus March firmware. First impressions are phone feels a bit snappier. Awesome kernel! Kcal control works great. On my G6 I changed rgb to 235/245/255 and saturation to 40.
Btw I'm using the same variant as you.
this works for XT1925-1 OPS27.82.87?
Alexibarra98 said:
this works for XT1925-1 OPS27.82.87?
Click to expand...
Click to collapse
I already tried it and yes it works
Alexibarra98 said:
I already tried it and yes it works
Click to expand...
Click to collapse
Awesome, good to know!
So far that's 2 confirmed variants
Been using since last night. Smooth as butter! A noticeable upgrade from stock kernel. I've flashed a few things and made a nano so not a good representation of battery life. I'll share my results when I have a normal usage day.
Works for me 1925-6 variant.
Omg, I'd love to see a Play (1922) variant of this kernel get made!
My wishlist includes much of what you've already included. Especially the Adrenoboost, Kcal, CRC disable, and added IO schedulers.
Just curious, do you plan on adding any hotplugging features? Like Intelliplug? Battery life could be drastically increased with implementation.
bubbyj said:
Omg, I'd love to see a Play (1922) variant of this kernel get made!
My wishlist includes much of what you've already included. Especially the Adrenoboost, Kcal, CRC disable, and added IO schedulers.
Just curious, do you plan on adding any hotplugging features? Like Intelliplug? Battery life could be drastically increased with implementation.
Click to expand...
Click to collapse
If you're willing to test (as I don't have that device) I can definitely put together a kernel for you guys.
As far as hot plugging features, that's something I can look into
you have planned to create some custom rom for the moto g6 jleeblanch? I dont like the stock rom
I recommend to anyone try this kernel. It's such a dramatic improvement over stock. So buttery smooth! You might enjoy stock rom better with a better performing kernel.
@Jleeblanch I'd like to donate to your development but don't see where you have a donation link.
Alexibarra98 said:
you have planned to create some custom rom for the moto g6 jleeblanch? I dont like the stock rom
Click to expand...
Click to collapse
I may possibly at some point. However, you are aware that you can flash treble GSI's? Just make sure to use arm A-only versions of whatever rom you wanna try out. I personally haven't tried any so I can't say either way what doesn't or doesn't work, but from what I hear most things do work fine. Just make sure you have a TWRP backup and/or the stock firmware for your variant in case something goes wrong.
giant22000 said:
I recommend to anyone try this kernel. It's such a dramatic improvement over stock. So buttery smooth! You might enjoy stock rom better with a better performing kernel.
@Jleeblanch I'd like to donate to your development but don't see where you have a donation link.
Click to expand...
Click to collapse
Thanks! Glad you're enjoying it!
As far as donations go, I don't currently except them (although as much time as I spend working the various Moto devices I own, I probably should). Regardless, a simple thanks will do [emoji6]
Working like a charm XT1925-3
How can I access the features of the kernel?
Like Kcal control?
darthxa said:
Working like a charm XT1925-3
How can I access the features of the kernel?
Like Kcal control?
Click to expand...
Click to collapse
Try apps like https://play.google.com/store/apps/details?id=flar2.exkernelmanager
Working, thank you
Working nice on XT1925-5 (OPS-27.82.87) Thank you so much. Sir, can you create some custom rom? Or can you say me, how to implentate "Moto fingerprint gestures" into treble roms ?
@Jleeblanch
Maybe you can activate the LED notifications in this kernel. Such things have already been done for older Motorola phones.
Example:
https://forum.xda-developers.com/2015-moto-g/development/kernel-somefeak-moto-g-2015-3rd-gen-t3622936
kemoti said:
@Jleeblanch
Maybe you can activate the LED notifications in this kernel. Such things have already been done for older Motorola phones.
Example:
https://forum.xda-developers.com/20.../kernel-somefeak-moto-g-2015-3rd-gen-t3622936
Click to expand...
Click to collapse
How to enable led notofication if the device doesn't have required hardware?
nlooooo said:
How to enable led notofication if the device doesn't have required hardware?
Click to expand...
Click to collapse
In previous models, there was a hidden diode, using the kernel gave the ability to use it as an LED notification. In moto g6 it is also possible.
https://forum.xda-developers.com/moto-g6/how-to/moto-g6-led-confirmed-t3806165
This kernel supports ROMS based on Android 10 only.
Main features:
- Upstreamed to Linux 4.9.228
- Compiled with Clang 11 + LLD + Polly
- Flash and forget
User features:
All these features can be used via EXKM app
- Vibration Control
- KCAL (Colour control)
- Sound Control
- Minimum Brightness Control
- USB Fast Charge
CPU features:
- CPU Governors: Schedutil
- Schedutil updated with patches from newer Linux versions
- Using PELT scheduler mechanism
- CPU idle improvements by kerneltoast
- CPU input boost
- RCU boost
File system & memory related features:
- NTFS and F2FS file systems supported
- f2fs Rapid GC
- CRC disabled for faster SD card performance
Network features:
- Westwood set as default TCP algorithm
- TTL
Other features:
- Xbox and Dualshock controllers supported with drivers updated to the latest
- Safetynet Flags Removed
- DTS Ultra support
- Wireguard
- VDSO for better performance in 32 bit apps
- Unused Drivers And Logging removed for a smaller image
Requirements:
Magisk for recommended kernel configuration to set
First Time Installation (clean flash):
1.) Download the Kernel from second post
2.) Have Stock kernel and ramdisk installed, if you are coming from another kernel, follow 'Restore stock boot partition guide' below
3.) Flash Magisk (optional)
3.) Flash the kernel in recovery
Upgrading the kernel:
1.) Download the kernel from the second post
2.) Dirty flash the kernel (this means flashing the kernel without wiping anything)
Restore stock boot partition guide:
This guide will show you how to restore your ROMS stock kernel and ramdisk without losing any data. It will also uninstall Magisk which can be flashed again. Follow this guide if coming from another custom kernel or if something is not working like spectrum or the config file in twisted kernel.
Method 1:
1) Dirty flash your current ROM. This means installing the ROM without wiping anything.
2) Flash Magisk if desired.
3) You are now ready to flash a custom kernel.
Method 2:
1) Extract boot.img from your currently installed ROMs zip file.
2) Go to the install page in TWRP > Flash image > Select the boot.img you extracted and flash it to the boot partition.
3) Reflash Magisk if desired.
4) You have now restored your stock kernel and ramdisk and can now flash a custom kernel.
Hit thanks or donate to support my work
Donators:
Hellboy4
Amnon Nir
Ricardo
Thomas Boll
Peter Goudschmidt
PM if you want your XDA profile linked on this list
XDA:DevDB Information
Twisted Kernel, Kernel for the Xiaomi Poco F1
Telegram https://t.me/twistedkernel
Contributors
Twisted Prime
YTG, Hellboy4, Rommco05, Dahake, Spyronos for testing
bgcngm, abhishek987 for maintaining LOS kernel
oipr for sched backports
Raphielscape for backports
osm0sis for anykernel installer
SultanXDA for Simple LMK, CPU input boost
kdrag0n for lots of stuff
flar2 for vibration control and sound control
Arter97 for f2fs enhancements
frap129 for Spectrum
Everyone whom I cherry-picked from
Source Code: https://github.com/TwistedKernel/Twisted-845
Version Information
Status: Stable
Current Stable Version: V24
Created 2019-11-21
Last Updated 2020-03-04
Downloads:
Some Poco users have touch issues with the latest NVT drivers, this is why different variants are provided. Use NVT 10.3.7 if you don't have touch issues on stock kernel. All F1 variants have the latest Focaltech drivers.
Download
Notes:
USB Fastcharge
This feature increases the maximum charging current from a PC to 900 mA from the default value of 500 mA.
Good stable kernel.
Best kernel
Great work???
Will test on oos
Very good kernel.very fasht in f2fs.great job
Only for AOSP ROM? Or can i use in MIUI?
peermohdd said:
Only for AOSP ROM? Or can i use in MIUI?
Click to expand...
Click to collapse
Sound doesn't work on MIUI
Twisted Prime said:
Sound doesn't work on MIUI
Click to expand...
Click to collapse
İ am flashed A10 FW fixed sound
Any one tried it on mi room?
Batsy538 said:
Any one tried it on mi room?
Click to expand...
Click to collapse
working miui roms try it
i will install miroom and install twisted
With this kernel is ps4 controller working with bluetooth? My phone got encrypted and before formatting data and flashing for nothing i'd love to know
Cheeto_Plug said:
With this kernel is ps4 controller working with bluetooth? My phone got encrypted and before formatting data and flashing for nothing i'd love to know
Click to expand...
Click to collapse
Works
it really does! thanks man it's been a nightmare trying to connect my controller without MIUI
PS4 (DS4) Working?
Cheeto_Plug said:
it really does! thanks man it's been a nightmare trying to connect my controller without MIUI
Click to expand...
Click to collapse
Can you confirm which ROM you are using with this kernel? I've tried everything and no success with PS4 controller on PE9 or PE10 with this kernel.
Any advice would be appreciated.
phase1tim said:
Can you confirm which ROM you are using with this kernel? I've tried everything and no success with PS4 controller on PE9 or PE10 with this kernel.
Any advice would be appreciated.
Click to expand...
Click to collapse
CrDroid 6, controller works even with default kernel
Deep sleep not working? Evo X
Edikuun said:
Deep sleep not working? Evo X
Click to expand...
Click to collapse
Fixing soon
Hellboy4 said:
Fixing soon
Click to expand...
Click to collapse
Does latest nightly fix the issue?
Features:
Based on Linux 4.19.187
kLapse
kCal
Boeffla wakelock blocker
WireGuard
Enabled a few TCP cong algos
Power efficient cores by default
Upstreamed to latest longterm 4.19.x branch
Tweaked out defconfig
much, much more.
Will add more later
No fancy installer.
Simply flash the image or zip in TWRP.
Magisk is included.
Thanks:
@flar2
@jimbo77
@arter97
@kdrag0n
@Sultanxda
@Mentalmuso
@morogoku
@elliwigy for hooking it up with the bootloader unlock service
More to come..
Source: https://github.com/freeza-inc/bm-galaxy-s20-ultra-snap-r
Releases: https://github.com/freeza-inc/bm-galaxy-s20-ultra-snap-r/releases
vR112: Linux 4.19.187
vR111: Linux 4.19.186
-April security patch level
vR110: Linux 4.19.185
vR109: Linux 4.19.184
vR108: Linux 4.19.183
vR107: Linux 4.19.182
vR106: Linux 4.19.181
-March security patch level
vR105: Linux 4.19.180
vR104: Linux 4.19.179
vR103: Linux 4.19.178
vR102: Linux 4.19.177
vR101: Linux 4.19.176
vR100: Linux 4.19.175
vR98: Linux 4.19.174
vR90: Linux 4.19.173
-Disabled MORE things in defconfig
-Security patch level to 2021-02
vR89: Linux 4.19.172
-Latest Magisk Canary
-Disabled a few things in defconfig
vR86: Linux 4.19.171
-Latest Magisk Canary
-Disabled a few things in defconfig
vR85: Linux 4.19.170
-Disabled a few things in defconfig
vR84: Linux 4.19.169
-Disabled a few things in defconfig
vR83: Linux 4.19.168
-Disabled a few things in defconfig
vR82: Linux 4.19.167
-Other cherry-picks
Congrats. The kernel is actually a beast
I thought its unified for S20 family. Went straight to twrp and flashed the kernel on my Y2Q and it bricked immediately lol. Do you plan to support the S20+ and the standard S20 on the future?
keaheng said:
I thought its unified for S20 family. Went straight to twrp and flashed the kernel on my Y2Q and it bricked immediately lol. Do you plan to support the S20+ and the standard S20 on the future?
Click to expand...
Click to collapse
Lol sorry about that! Yeah I'm definitely planning on supporting the rest of the s20 line soon.
freeza said:
Yeah I'm definitely planning on supporting the rest of the s20 line soon.
Click to expand...
Click to collapse
That is amazing news! Thanks
Nice work been running great right out of the box thank you!!
Is this for stock rom
rayraycarter4 said:
Is this for stock rom
Click to expand...
Click to collapse
Yes
freeza said:
Yes
Click to expand...
Click to collapse
I flashed it on ui 3.0 rom and got bootloops
rayraycarter4 said:
I flashed it on ui 3.0 rom and got bootloops
Click to expand...
Click to collapse
Are you stock rooted
JDBarlow said:
Are you stock rooted
Click to expand...
Click to collapse
I'm using bklyn_syed 3.0 ui rom
rayraycarter4 said:
I'm using bklyn_syed 3.0 ui rom
Click to expand...
Click to collapse
Were you coming from another custom kernel or stock kernel
I had weta kernel installed on stock and then flashed bm kernel and mine bootlooped. When I installed Ali's rom I installed bm kernel right after flashing magisk on the first boot and it booted right up..I've flashed back and forth between the 2 kernels now with no issue..
JDBarlow said:
Were you coming from another custom kernel or stock kernel
I had weta kernel installed on stock and then flashed bm kernel and mine bootlooped. When I installed Ali's rom I installed bm kernel right after flashing magisk on the first boot and it booted right up..I've flashed back and forth between the 2 kernels now with no issue..
Click to expand...
Click to collapse
Stock kernel
rayraycarter4 said:
Stock kernel
Click to expand...
Click to collapse
Did you have any security biometrics saved?
JDBarlow said:
Did you have any security biometrics saved?
Click to expand...
Click to collapse
Yes
vR82: Linux 4.19.167
-Other cherry-picks
began a feature list. will update as versions are release
rayraycarter4 said:
I flashed it on ui 3.0 rom and got bootloops
Click to expand...
Click to collapse
Could be an issue with magisk. It is using the latest canary version so make sure your magisk manager is also on the latest canary.
Also, this kernel is using security patch level 2021-01-01 so the ROM needs to also match this.
freeza said:
vR82: Linux 4.19.167
-Other cherry-picks
Click to expand...
Click to collapse
Loving it as usual running great for my needs
Removed