ROM MIUI 11 Q GSI ARM64 FOR J7Pro (fixed sim cards) work good No more update - Samsung Galaxy J7 (2017) Guides, News, & Discussio
What does fingerprint, brightness, camera and searchlight not work?
Soon reform and integration
Quote:
Warning :
Advice for everyone, no one uses a Project_Spaget X or 3.0 or old Do not use it with any gsi Except for pixels
Because you will notice a lot of problems with it, even if it is
He repaired it
Because I repaired and added files from Xiaomi
I think that if Astmrr society here will take the fittest and suits him for himself
Everything links has been deleted because it violates Forum Law No. 12
must read
Because I modified the work of a person
His work corrected him, with a lot of things being deleted
It is not enough to add his name to the topic
As for some of the last links, they were deleted
Because she was making very little profit from her
* This violates the forum rights
So bye guys
:good:
it May Take some time after go to wipe:select dalvik/art and cache and reboot to recovery
2) Extract Our Mine.ZIP and copy it TO Recovery Restore Click on the file Our Mine.ZIP and swipe to Restore Swipe to Restore ReboOt to System
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Everything has been deleted because it violates Forum Law No. 12
Because I modified the work of a person
His work corrected him, with a lot of things being deleted
It is not enough to add his name to the topic
So bye guys
:good: Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here.
Please take caution and be aware of what you are doing. And Always backup !
1) INSTALL Create vendor 2) INSTALL SpagetX 3) Wipe Data, Cache e System
4) INSTALL GSI MIUI 11 mod edit - link removed
5) INSTALL Permissiver_v5 about It is not important, but if a problem occurs during the logo, install it
6) INSTALL Magisk v20.3 for J7 Pro only
7) INSTALL ingle Sim Patch importan TO FIX SIM Thank u @tom.android about this steps
9. Reboot (the fist time boot --hello MIUI 11 CN
Not set wifi --No online during setup android.
10. Enable Developer mode set DPI ( Smallest width about 600 or any ...up to you )
-setup Fingerprint
-make Lock screen shot-cut on home-screen
-setting-->Home Screen Menu
set Swip up on the Home screen to = None
set App vault = Disable
-open wifi
-Flash Fix Treble Sound mod edit - link removed
-New Fix System sound cracked " fixaudiogsi.zip"
mod edit - link removed
------------
About this step will fail not do this after i fix it
Make CN to EN
11. Install EdXposed
Magisk Manager install below mods
-Riru-Core (Magisk Mod)
-Riru-EdXposed YAHFA (Magisk Mod)
-EdXposedManager.apk
Edxposed Manager -- install below mod
-HiddenCore (com.cofface.ivader) ---xposed mod
-MIUI Anesthetist
More Debloated by yourself
12.Install Root Explorer (Root) or any you like
-Delete System Apps ( forbidden to delete such as..)
/System/app/MiuiSuperMarket
/System/app/Updater
Etc.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
House keeping This step is not important if you want
---Fix sound bug .( by install Viper4A)
**How to install Viper4A with Android 10/Q
1.Download ROOTLESS DRIVER INSTALLER " v4afx-rootless_08.18.2019.zip" from here
https://zackptg5.com/android.php#viper
2.Flash " " v4afx-rootless_08.18.2019.zip"
3.Download archive ViPER4Android.rar extract to your phone storage
.Open and run v4a.apk from inside ViPER4Android folder.
4.open Magisk manager install Audio Modification library and restart
-If your launcher starts to flick on startup, flash that: Google Drive
(https://drive.google.com/file/d/1bWC...ew?usp=sharing)
Just flash if launcher flicks on first boot
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Fix error " Android System: your vendor image does not match the system......." Not tested this step not do it
-edit (system/vendor----> bulid prop)
change line " ro.vendor.build.fingerprint = xxx to ro.build.fingerprint=xxx
and/or
-edit (system ---> bulid prop)
change " ro.treble.enabled=true" to " ro.treble.enabled=false"
- reboot
END
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
I The tested successful wOrk GOOD All Everything except Smart View I will fix it SOON And look for a solution and Fingerprint not work on q soon will fix it
How Install it (MiRoom) MIUI 11 Q
1) INSTALL Create vendor 2) INSTALL SpagetX 3) Wipe Data, Cache e System
4) INSTALL GSI MIUI 11 MiRoom
5) INSTALL CronosKernel-V5.0-Treble
6) INSTALL Permissiver_v5 about It is not important, but if a problem occurs during the logo, install it
7) INSTALL Magisk v20.3 for J7 Pro only
8) INSTALL ingle Sim Patch
After Restart to system and open
-iNSTALL APK Play Services
-iNSTALL APK Play Store
This Q Android 10 https://sourceforge.net/projects/zj...om-Aonly-10-20191115-GSI.img-2303.7z/download Thank U Get the Link Rom @hacker812cFoR And Thank U @ZJRDroid Credits to @ZJRDroid developer of this custom rom (I recommend it) Fingerprint not work on q soon will fix it
5) Fix Fingerprint mod edit - link removed only for pin and try it with q if work tell me
##) GSi Sim Patch to Fix Sim Card will work mod edit - link removed Thank U Gamer Pro He did not help me But I took his file And I test it to all gsi only Aonly and not test for ab for pin gsi and q gsi
7) CronosKernel u can download it from xda Thank u @ananjaser1211
Google Play Services APK:
mod edit - link removed
I really got tired a lot and tried a lot and adjusted some things in the ROM in GSI
screenshots? go to this about sim card work
https://www.facebook.com/photo.php?fbid=1551641314991093&set=a.102624916559414&type=3&theater
screenshots?
May Ahmed said:
Wow Nice I saw your screenshots about rom (MiRoom) , but where screenshots about rom (miuiMiX)
https://www.facebook.com/photo.php?fbid=1551572734997951&set=pcb.1551574014997823&type=3&theater
some time open link some time not open
Hey post screenshots on any site other not this facebook
Click to expand...
Click to collapse
Thank u Okay wait
Very nice :good: But with Gapps I have some annoying with Google Play Services, this alway stopping after install
NindoS said:
Very nice :good: But with Gapps I have some annoying with Google Play Services, this alway stopping after install
Click to expand...
Click to collapse
-Install APK Play Services
-Install APK Play Store
Will work good NOT stopping after install again If you are talking about MiuiMiX pin MIUI 11 (Still under test)
and about MiRoom work good i Tested work good Just not work fingerprint and smart view
Thanks for the support my friend @NindoS
I know because of integration problems occur Gapps with rom and not good
I will get rom without Gapps and Users are using my file Gapps after editing I will amend it more
for magisk safe mode soon
Nice work ......
hello. I have a few questions. do these sim card fixes work on Galaxy j5 2017 and Will both sim cards work?
vytska69 said:
hello. I have a few questions. do these sim card fixes work on Galaxy j5 2017 and Will both sim cards work?
Click to expand...
Click to collapse
Yes ,I think so will work 90% , but try it if you like and tell me work or not Because I do not have this phone Galaxy j5
only one sim card works
vytautas322 said:
only one sim card works
Click to expand...
Click to collapse
Everything except the fingerprint and no fm radio and smart view soon i will fix it
But you can use the fingerprint security app from Google Play Store
my partition is damaged every time the gsi flashes
Our Mine said:
Yes ,I think so will work 90% , but try it if you like and tell me work or not Because I do not have this phone Galaxy j5
Click to expand...
Click to collapse
Does sim fix can also use for J730g so work on both sim?
I am using this now MiRoom very fast and cool, but fingerprint and engraving is really a problem , what about MIUI-Aonly-10-20191117-GSI.img-0001 what is the difference
this rom has problems. not working two sim cards, not working flashlight. I installed resurrection remix 7.0.2. I'm waiting for you to fix the errors. thank you
---------- Post added at 11:06 PM ---------- Previous post was at 11:05 PM ----------
By the way, hotspot doesn't work
Wow. MiUi 11 Q on j7pro. Great job. I hope all will be fixed.
Beautiful and fast But I returned to Android 9 Because this rom has many problems ,,,But really a good work, keep working on fixing it , I am waiting
gsi link does not exist
Edenilson10 said:
gsi link does not exist
Click to expand...
Click to collapse
https://drive.google.com/open?id=1fSLW6yE5Wk-AW4lYD9CVv6MtP9DdP4KA
no wifi
hello i tested in j5 pro perfect fonctionnal
-problem
no wifi connecting
thank
on j7 2016 will work?
Related
[ROM][PORT] PAC ROM UNOFFICIAL for Redmi Note 4G Single Sim
Hi guys, this is my first port, i am not a developer, i have just followed a rom porting guide. created by @rishabh.raj37 This Rom is based on lastest CM11 build by jkaz. Working : Everything..(Including Headphones) Not Working : None Procedure : 1. Download the Rom and gapps and copy both files in to sd card or ext-sd. 2. Reboot into recovery 3. wipe cache, dalvik cache, data... 4. Install both rom and gapps. 5. Reboot phone... I am not responsible for bricked devices. Credits: Xda Cyanogenmode team Pac-man developers Mokee developers, @LiquidPlacidity JKaz @Jamil69 @umangleekha (For Headphone fix patch) I take credit only for porting this rom to our device, but i don't take credit any other way... ROM Download Gapps For root access flash zip file from the link SuperSu Note: 1. - Just edit the build.prop, find the line: ro.sf.lcd_density = 270 change the value to 320 save it and reboot. 2. - Download system app remover from playstore - Open it and grant root permission - select and uninstall nfc service and pac console. - reboot. - this removes nfc wake and pac console force close.
Great News.. Thanks Bro, finally another cusrom for Dior. asrupesh said: Hi guys, this is my first port, i am not a developer, i have just followed a rom porting guide. created by @rishabh.raj37 This Rom is based on lastest CM11 build by jkaz. Working : Everything..(Including Headphones) Not Working : None Procedure : 1. Download the Rom and gapps and copy both files in to sd card or ext-sd. 2. Reboot into recovery 3. wipe cache, dalvik cache, data... 4. Install both rom and gapps. 5. Reboot phone... I am not responsible for bricked devices. Credits: Xda Cyanogenmode team Pac-man developers Mokee developers, @LiquidPlacidity JKaz @Jamil69 @umangleekha (For Headphone fix patch) I take credit only for porting this rom to our device, but i don't take credit any other way... ROM Download Gapps For root access flash zip file from the link SuperSu Click to expand... Click to collapse Thanks for this cusrom bro, i will try it.
There's a nfc wakelock and Systemupdateservice wakelock. Other than that the rom is functional.
Thanks bro, this runs better than mokee and doesn't have shady apps.
screenshot plz...
So far everything works fine. Bugs: 1) Everytime Wi-Fi is turned on, PAC Console forced close. 2) The resoulution is kinda small & look like tablet. Maybe I can tweak the build.prop about the resolution.
I can confirm what zahinasaur wrote: 1) PAC Console force closes, but for me, on each boot, but after I disabled it in Manage Apps, it's OK. 2) Resolution looks strange, but it's also OK. 3) New thing: isn't App2SD functionality enabled on this ROM? Can you please package a new version with this functionality enabled? Besides these, it's works much better than Mokee ROM at least for me, so thank you for your work!
Resolution fix Just edit the build.prop, find the line: ro.sf.lcd_density Change the value & reboot. Mine works best at value 320. You can try different value.
Thank you, this works. I'm more happy with the 296 setting, but you wrote the correct solution for this problem. 2 problems left.
By the way, not installing SuperSU gives you the default (CM?) SU implementation which works better at least for me, for e.g. BusyBox installation.
1st post updated...
headphone fix asrupesh said: 1st post updated... Click to expand... Click to collapse Is the headphone fix included in the rom or I have to flash something for it? and what about system update service bug? - for this I have a solution download my android tools from play store in service tab -> system -> google play services -> at the end of the list there is system update service, just disabling it worked for my old phone, which had similar bug... Hope this helps..
whats new??
Guys, do you see the external SD card?
[ROM][5.1.1][Galaxy J5/J500FN & J500F][01/02/2016] Stock ROM Advanced v1.0
DISCLAIMER: Code: /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */ WARNING: KNOX GET VOIDED! This rom is for J500FN model.I don't know if it does work on J500F or any other model. If you want to try, just remove assert lines in updater-script, BUT i'm not responsible if you brick your phone! Is working on J500F model. Thank you @the-bomber for confirmation! Read here to see how to remove assert lines: How to remove assert lines Post #1 : Features, Download link, how to install the rom, credits. Post #2 : Changelog, Bugs, to do list Post #3 : FAQ/TIPS. [QRCODE][/QRCODE] INTRODUCTION: Hello! I'm Robert, an satisfied and happy user of the Samsung Galaxy J5 ( J500FN), but somehow bored of it since it doesn't have any custom rom or kernel, in few words, xda support. At begin, i was planning to build Cyanogenmod or AOSP and an custom kernel with minimal features, but i lack the knowledge to do it, but it's not impossible, just that i have alot of headache and i'm not that happy with that. I was also planning to do an custom rom too, with many features and many themes available, this is easier, but again alot of headache. I can't promise i would do these, but i may try again to make a better custom rom. So, here is Stock ROM Advanced. It's just an simple rom, nothing more yet. Check out the features section for more informations.Screenshots attached ( switch XDA theme to 2013 or 2015 theme from bottom of page and click on Screenshots tab if you can't see them. Please share this XDA thread since Galaxy J5 doesn't have it's own xda forum... FEATURES: - Based on firmware J500FNXXU1AOI1_J500FNDBT1AOI2_J500FNXXU1AOI1 - Pre-Rooted with SuperSU (v2.66) - Busybox installed (v1.24.1-osm0sis) - Zipaligned all system apps (for better utilization of RAM) - What mean this? <--- click - Deodexed - What mean this? <--- click - Debloated - removed some samsung apps and some other unecessary apps for more RAM, more internal memory available and less wakelocks (so more battery). More info about removed apps in post #2. - Knox removed - Faster boot & shutdown - Faster than stock? You tell me Click to expand... Click to collapse That's all the features it has now. Is just an custom rom based on stock rom, with some minimal changes, but improving the daily experience, at least for me. I can't promise, but maybe in future i will make it more than an simple rom, with more features. I repeat, can't promise it. I have decided to add more features in next version. DOWNLOAD: Stock_ROM_Advanced <<< click. Just mediafire link for now. DO NOT MIRROR THE ROM. IF YOU WANT AN MIRROR, LET ME KNOW AND I WILL UPLOAD IT TO THE WEBSITE YOU WISH since i have good network! Thank you! INSTALLATION: (it's actually easy to install it, but i've wrote it this way because there may be new people to XDA which just wish the rom and doesn't want to bother by searching to how to do it) 1. Download the rom and put it on your External SD Card ( make sure you have enough space). 2. Download this TWRP recovery: TWRP recovery by @aapav01 - more info about this recovery at CREDITS You can also use TWRP 3.0 by [MENTION]Nick Verse [/MENTION]which is fully working. Big thanks to him as well. If you didn't know yet, he also made a KERNEL for our J5 3. Download ODIN program. I'm using v3.09 4. Enable the OEM unlock bootloader option at developer options (if you can't see Developer Options, then go to Settings > About phone and tap 7 times build number). 5. Reboot your phone in download mode by keeping pressing Power button + home button + volume DOWN button at same time for few seconds. After an blue screen will appear, press volume up button. 6. Connect your phone with usb cable to your PC. 7. Open ODIN program and an number should appear at ID:COM. If it doesn't, then make sure that the phone usb drivers are installed. 8. Click on AP or PDA ( according to the version of odin which you downloaded) and choose the TWRP recovery you've downloaded and click START. Wait until the process finish. 9. Now go to TWRP recovery by keeping pressing Power button + home button + volume UP button at same time for few seconds. 10. Choose Wipe, then Advanced wipe and choose Dalvik Cache, System, Data and Cache and then Swipe to wipe. 11. Now choose Install and go to the place where you did put the ROM and choose it. Wait till installation finish and DON'T REBOOT YET. 12. Flash GAPPS. I use Open Gapps, ARM 5.1.1 pico version. http://opengapps.org/ . It's XDA thread is HERE . 13. Wipe dalvk cache & cache. 14. Reboot & WAIT 5-10 minutes until it boot!. Only first boot is longer. NOTE: When you reboot, if it ask you for SuperSU choose "do not install". 15. If you followed all the steps carefully, then everything will be OK. Enjoy Click to expand... Click to collapse Flashing GAPPS is required because if you don't you will be stuck at setup wizard. This issue is probably caused by one of the removed apps. However, it won't cause any other problem. So, flashing GAPPS is a must right after you flash the rom, but you can remove them if you wish after you finish Setup Wizard. CREDITS: @SuperR. for his nice and useful kitchen. @aapav01 for the TWRP recovery. Big thanks to him because without the recovery, you couldn't even flash the rom! @osm0sis for busybox @Chainfire for SuperSU @Force me, for doing this small rom Pressing the THANKS button does give me some satisfaction/motivation XDA:DevDB Information Stock ROM Advanced, ROM for all devices (see above for details) Contributors Force ROM OS Version: 5.1.x Lollipop ROM Kernel: Linux 3.10.x ROM Firmware Required: Lollipop 5.1.1 & TWRP ( knox get voided) Based On: Official Stock ROM Version Information Status: Stable Current Stable Version: 1 Stable Release Date: 2016-02-01 Created 2016-02-01 Last Updated 2016-07-25
Changelog CHANGELOG: Code: v1.0 - Initial version BUGS: - WiFi. Two guys confirmed me that WiFi isn't working, but is working fine for me. WIFI got working! Read HERE and HERE. Flash LINARO KERNEL and WIFI will work. Thank you @Nick Verse for the kernel and @swistakkk1 for confirmation. Maybe is not fully debloated, but i didn't have any issue after i've deleted these apps. i can remove even more to make the rom lighter, apps which doesn't suit for me, which some people would want them... I may add AROMA zip to let people choose what apps they want to remove. /system/app deleted apps /system/priv-app deleted apps
FAQ / TIPS 1. How do i install Xposed Framework? Follow these steps: http://forum.xda-developers.com/showpost.php?p=64490530&postcount=2 This is a list of confirmed working modules until now: Code: - [URL="http://forum.xda-developers.com/xposed/modules/xprivacy-ultimate-android-privacy-app-t2320783"]XPrivacy[/URL] - [URL="http://forum.xda-developers.com/xposed/modules/xposed-appopsxposed-appops-4-3-t2564865"]AppOpsXposed[/URL] - [URL="http://forum.xda-developers.com/xposed/modules/app-bootmanager-t2432359"]Boot Manager[/URL] - [URL="http://forum.xda-developers.com/xposed/modules/mod-obb-sd-v0-1-t2884004"]Obb on SD[/URL] - APM+ - Gpm notification seek bar[L-M] - ScreenOffAnimation - Android Phone Vibrator - Flat Style Bar Indicators - Greenify - NoSafeVolumeWarning - Notification Manager Thank you: @22rp420 @nov01 for confirming some xposed modules! If you know more xposed modules which are working on our phone, share with us! 2. My phone is running slow / has lag. Why? My phone haven't lag or ran slow never and i'm using Power Saving mode all the time. Use Greenify app to hibernate the apps which are running in background. Maybe you don't want Facebook or other apps running in background, eating RAM and battery while you use your phone or while your phone is in idle/standby. Then Greenify become useful. It does help gaining some more available RAM and also battery. Also, don't use any Task killer because it is not necessary. It just does the opposite: make the phone run slow. 3. My battery drain too fast! People use phone different. Everyone. My best SOT (screen on time) was 13 hours. Maybe you can or can't achieve that SOT. It all depends of how you use the phone. The biggest battery drainer on Android are: - Facebook app, facebook messenger - Google Services Greenify does help gaining battery too. You should install BetterBatteryStats app to see what is draining your battery. Personally, i'm using facebook in browser and i enable play services when i need them. I disable them with Tasker app by running some shell commands. Of course, you can do this with init.d too or some other apps. I will share the shell commands which i'm using later. I have maximum 10 minutes wakelocks in BetterBatteryStats widget and my battery doesn't drain even 1% per night.
FAQ/TIPS reserved
It is absolutely fantastic to see fellow forum/country who have worked and learned a lot and return help to the community. Big like to you @Force ! Razvan
Sorry @Force i may not be able test your work as i don't have access to my pc right now and don't know for how long but once i get time and access back i will firstly try your rom. But yes anyways thanks for the development.
@Force this ROM work on SM-J500H?
smk.mosharraf said: @Force this ROM work on SM-J500H? Click to expand... Click to collapse WARNING: KNOX GET VOIDED! This rom is for J500FN model.I don't know if it does work on J500F or any other model. If you want to try, just remove assert lines in updater-script, BUT i'm not responsible if you brick your phone! Click to expand... Click to collapse It was specified at the begin of the thread...
Wifi @Force WiFi is not working i have reinstalled this rom a few times now and it still wont let me switch the wifi on i have even tried going back to stock and the wifi is still working fine there any suggestions
galaxysi9000freak said: @Force WiFi is not working i have reinstalled this rom a few times now and it still wont let me switch the wifi on i have even tried going back to stock and the wifi is still working fine there any suggestions Click to expand... Click to collapse Did you flash it on J500FN? I haven't experienced this problem. I will look into this. Are there more people who experienced this? Please let me know.
Force said: Did you flash it on J500FN? I haven't experienced this problem. I will look into this. Are there more people who experienced this? Please let me know. Click to expand... Click to collapse yes i did flash this on the j500FN
Wifi Force said: Did you flash it on J500FN? I haven't experienced this problem. I will look into this. Are there more people who experienced this? Please let me know. Click to expand... Click to collapse Thank you for this rom, but Wifi doesn't work :crying:
galaxysi9000freak said: @Force WiFi is not working i have reinstalled this rom a few times now and it still wont let me switch the wifi on i have even tried going back to stock and the wifi is still working fine there any suggestions Click to expand... Click to collapse MAICK-LGG3 said: Thank you for this rom, but Wifi doesn't work :crying: Click to expand... Click to collapse I don't have any issue with the WiFi, but I think that the problem might be caused by WlanTest which I've removed it. Later, I'll post here an flashable zip which does bring the WlanTest back and hopefully Wifi gets fixed. Thank you both for reporting this!
Razvan said: It is absolutely fantastic to see fellow forum/country who have worked and learned a lot and return help to the community. Big like to you @Force ! Razvan Click to expand... Click to collapse YES! Indeed!
@MAICK-LGG3 @galaxysi9000freak I'm sorry for being late and also that i haven't made an flashable zip. I uploaded an zip file containing the WlanTest.apk. 1) Download WlanTest zip and extract the zip on your sdcard. 2) After you extracted the zip, you will have an folder named WlanTest and inside the folder WlanTest.apk. Use an file explorer with root and move the folder WlanTest to /system/app. 3) Set permission for the folder like this: http://i.imgur.com/gin3axj.png . 4) Set permission for WlanTest.apk from inside of folder like this: http://i.imgur.com/NXy772e.png . 5) Reboot Let me know if this fix your wifi problems. I was quite busy on working on the rom. Starting from next version, the rom will have a new name. It will also be themed, will have it's own logo and own bootanimation and more. Don't wanna spoil I see that this thread has 600+ views already which is nice to see it
Doesn't work Force said: @MAICK-LGG3 @galaxysi9000freak I'm sorry for being late and also that i haven't made an flashable zip. I uploaded an zip file containing the WlanTest.apk. 1) Download WlanTest zip and extract the zip on your sdcard. 2) After you extracted the zip, you will have an folder named WlanTest and inside the folder WlanTest.apk. Use an file explorer with root and move the folder WlanTest to /system/app. 3) Set permission for the folder like this: http://i.imgur.com/gin3axj.png . 4) Set permission for WlanTest.apk from inside of folder like this: http://i.imgur.com/NXy772e.png . 5) Reboot Let me know if this fix your wifi problems. I was quite busy on working on the rom. Starting from next version, the rom will have a new name. It will also be themed, will have it's own logo and own bootanimation and more. Don't wanna spoil I see that this thread has 600+ views already which is nice to see it Click to expand... Click to collapse Wlantest tested, doesn't work
MAICK-LGG3 said: Wlantest tested, doesn't work Click to expand... Click to collapse Can you take a logcat please? How to take logcat Start taking the logcat and then try to put wifi on. Also, try to wipe dalvik cache and cache in recovery. Thank you!
MAICK-LGG3 said: Wlantest tested, doesn't work Click to expand... Click to collapse if @Force doesnt have wifi problem, you should download again the rom and flash it could be a download problem and some files can be corupted. i meet many times this "download isue" and was fixed in this mode just try it! @Force you can test the uploaded package too. Trimis de pe al meu SM-J500FN folosind Tapatalk
Force said: Can you take a logcat please? How to take logcat Start taking the logcat and then try to put wifi on. Also, try to wipe dalvik cache and cache in recovery. Thank you! Click to expand... Click to collapse i have tested this and wifi is still not working i have a log View attachment 3631908
thanks for the rom confirmed working fine on J500F ! if u need any help i'll be happy to help you since i have themed and developed roms ... i was lazy to work on a rom but since you started i'll help if u need any thanks for the awesome rom !! edit: WIFI isn't working !
CherrugRom for Leeco Le Max 2 x82x [ROM][6.0][BASED ON EUI 5.9.028S]
Hi guys, I've developed my personal custom rom. Italian people can read this article instead of this one. These are all the features (I hope to remember all of them ) : - based on CherrugKernel - OTA updates for rom and kernel too - Removed all chinese stuffs - Gapps included - Rooted with magisk 16.0 - Build.prop tweaks - Increased volume step to 45 - Added support to su.d - Better doze - Better ram managment by crok - Camera API 2 enabled - Ads block integrated - Face unlock support - Google lens enabled - Bigger space for Google photos' drive - Developer options pre-activated - Removed some futile voices in settings - Removed some unused lib - Busybox included Tips: 1) For any problem with notifications open the dialer and call *#*#46360000#*#*. Disable the last voice of menu that will appears. Go to Settings.apk -> Battery -> Smart battery for apps and select all the apps of wich you want to receive notification. Now come back and select Align Wake-up and disable Align Wake-up voice. Now come back to the first Settings.apk page and select Permissions. Go to "You have allowed x apps to auto launch" voice and choose the same apps you have choose in smart battery menu. Done 2) Choose USA region to remove yellowpage's tab in phone and contacts and allow icons in notifications. 3) To enable Face recognition go to Settings.apk -> Security centre and set a screen lock. Now go to Smart Lock, insert your pattern/code/password and choose Trusted face then SET-UP, NEXT and memorize your face. To better unlock your phone memorize your face in different light's conditions. 4) For problem with camera go in camera's settings, scroll down to Use Camera2 API and enable it. 5) To pass CTS Profile in Magisk boot one time then use the universalsafetynetfix in download. 6) If u have problem with OTA updater clear app's download history, force close it, clear app's data and then reopen it. The rom has been tested on my x829 6/128Gb and a x820 6/64Gb too. I granted that it's stable but I'm not responsible for any problems to your phone. Flash at your own risk. How to install? I advice to do a complete clean install. To do this go to twrp -> wipe -> advanced wipe -> select cache,dalvik,system,data and internal storage. First time I do also format data but isn't necessary. Now go to Advanced -> Adb sideload and check all the voices. Download rom's zip on pc. Now go to adb and fastboot drivers' folder and click right mouse's button + shift on an empty part of the folder. Choose open command line here or something like that from showed menu. Now write adb sideload and drag rom's zip on the window. For Windows 10 put ./ before adb command. On the phone do swipe. Wait some seconds and push enter on pc. If you're italian and want to install by conventional mode check this. Andoidfilehost mirror Andoidfilehost mirror NoGapps' Rom Alpha This is a version without Gapps. I replace Google package installer with stock one, root browser with es file explorer, removed Truecaller and put in Opera Touch to allow u download your prefered apk. Maybe Pi Music Player will crash due Google play services dependence. I called it Alpha because I don't have tested it yet, let me know for any problem. Telegram group If you could join the group and partecipate to future update for the rom with your feedback, your advice, sharing logs, screen shoots the entire community will thanks u. :good: CherrugRom, ROM for the LeEco Le Max 2 Contributors - CherrugDeveloper - @Lucchetto00, to help me with kernel and some stuffs - CornFlaix, for the logo - @arielaco, for the great help for toggles and so on - @mauronofrio, for universalsafetynetfix ROM OS Version: 6.0.x Marshmallow ROM Kernel: Linux 3.x Version Information Status: Beta Current Beta Version: v1.0 Beta Release Date: 2018-05-30 Created 2018-05-30 Last Updated 2018-05-30
Thanks for tour ROM. It is based on EUi5 Enviado desde mi LEX820 mediante Tapatalk
yes it is based on eui 5.9.028s
AFH link not correct is this one https://androidfilehost.com/?fid=818222786056033733
i install this rom fast ram managment is good Camera good ringing volume clear and loud fingerprint is good face unlock not working FC battery draining fast slow internet 4g/volte unstable Thnax for this Rom keep doing best things Best of luck bro:good:
face unlock FC
Can you download matlog and send me the error please? Do u have done a clean installation?
CherrugDeveloper said: Can you download matlog and send me the error please? Do u have done a clean installation? Click to expand... Click to collapse yup clean install.. how get matlog?
From the store. Is an app which show you logcat. Grant superuser permission and set errors only, after that run face unlock and send me the log.
Link works for me and there are 25 downloads so for the others too
CherrugDeveloper said: From the store. Is an app which show you logcat. Grant superuser permission and set errors only, after that run face unlock and send me the log. Click to expand... Click to collapse I get this file bro... hope so is it right?
please made telegrame group for discussion
Great idea I forget to do it ahahahah I'm so busy today and tomorrow too
The log is strange I don't know if you have pick it right way but it seems to be a libs' error. First try do delete data to facelock app and after reboot in recovery and wipe cache and dalvik. Try again and let us know. Thank you for your time
CherrugDeveloper said: The log is strange I don't know if you have pick it right way but it seems to be a libs' error. First try do delete data to facelock app and after reboot in recovery and wipe cache and dalvik. Try again and let us know. Thank you for your time Click to expand... Click to collapse sorry bro not working
fromjeet said: sorry bro not working Click to expand... Click to collapse I will try to make a zip for you maybe tomorrow. I added telegram group's link on thread.
Can u also look if smart locks are activated under security center -> other security options -> trusted agents?
I've uploaded an OTA update for kernel. I hope new profiles will drain less battery. Waiting yours feedbacks
CherrugDeveloper said: I've uploaded an OTA update for kernel. I hope new profiles will drain less battery. Waiting yours feedbacks Click to expand... Click to collapse Ok I will try
fromjeet said: Ok I will try Click to expand... Click to collapse Jeet have u verified smart agents?
[FIRMWARE] ASUS ZenUI ROM for Teclast T8
Disclaimer: I am not responsible for anything bad that may occur with your device, but I will take all the credit you can give me if it works for you! Finally, I would like to present first custom ROM for our device (Teclast T8)! It was ported by me from ASUS ZenPad 3S 10 Z500M and this firmware has lots of great features! It was tested for about a month before release, because I didn't want to share beta ROM with a lot of bugs/issues. This version is only for flashing via TWRP! (it can be found here https://forum.xda-developers.com/android/help/twrp-root-custom-recovery-teclast-t8-t3892647) Version Information Status: stable (suits for everyday usage) Created: 08.01.2019 Updated: 25.06.2020 Android version: kernel 3.18.35, android 7.0 Nougat What's done/features Added ROOT (Magisk) No bugs with battery statistics (like it was on stock ROM) Unique ASUS design and customization (icons, themes, etc) New useful functions (split screen, quick launch apps on lockscreen, etc) Advanced power/battery control tools 04.03.2020 - fixed issues with sound 25.06.2020 - fixed offline charge Bugs Double tap to awake function Gestures on lockscreen All other functions work great! (fingerprint, camera, etc) Installation Download firmware to internal storage Reboot into TWRP Do this wipes in Wipe section: system, cache, dalvik,data Reboot recovery: go to reboot section -> choose Reboot recovery Go to install section and choose .zip package After installation completed just reboot device and enjoy If you face error "failed to mount system" or something like this after installation completed - don't mind it and reboot Screenshots P.S After device is booted you can choose any language on system setup. I used MIUI icon pack here. Download The link is here - https://mega.nz/file/WxYTDSiI#tFXlrqjv3z9qgXI1aZoUM8NdTP99PvKI5eXJSmIeLEQ If you would like to support further development - https://www.paypal.me/teclastT8development
Brilliant! Thank you Sword900 - GREAT JOB!
Thanks to the developer for this ROM and TWRP. It's a good device let down by lack of software support and removes all the Chinese native apps which I could not remove even with Titanium backup. I was running TOS 2.0.1 but with a magisk patched boot image which I flashed a long time ago. This makes it simpler. There are some issues with the TWRP but atleast I can update Magisk without having to patch the boot image and flash it every time. The zip file in OP, the folder names have a comma after the number as pointed out earlier. Remove that before attempting any operations or you will face weird and wonderful behaviour.
Works like a charm !
I have problem with the sound. When i turn on the volume and play ssomething, i will hear annoying sound (ezzzzzz,,*%$)
zenacute said: I have problem with the sound. When i turn on the volume and play ssomething, i will hear annoying sound (ezzzzzz,,*%$) Click to expand... Click to collapse I too... any solutions?
zenacute said: I have problem with the sound. When i turn on the volume and play ssomething, i will hear annoying sound (ezzzzzz,,*%$) Click to expand... Click to collapse saddys said: I too... any solutions? Click to expand... Click to collapse Seems like I finally fixed it. You should install new version with all wipes listed, download link was updated. Let me know if you find any other issues.
How did you make this? I'm trying to do the same with other Teclast tablets.(With P80X) I would appreciate it if you could tell me. (I used Google Translate)
few__ said: How did you make this? I'm trying to do the same with other Teclast tablets.(With P80X) I would appreciate it if you could tell me. (I used Google Translate) Click to expand... Click to collapse I've just ported this ROM from another device with alike parameters (chipset, android os version, etc). There are lots of guides on the net which will help u. Another way is to find or make it manually kernel-source for your device, so u could compile firmwares on your own. But it requires appropriative knowledges in android development. Also u may take a closer look at GSI project as if your stock firmware is based on android 9.0.
[ROM][10.0]BETA[PORTED][UNOFFICIAL] Havoc 3.0 [UGGLITE] V2 2019-12-06
HAVOC 3.0 ROM V2 2019-12-06 Project ended. This is BETA version, USE STABLE crDroid or GoogleDroid ROMs. Your warranty is now void. There's no guarantee, don't use it if you don't know what you're doing! Android quota removed. (Easy back 7.x-9.x ROMs) Make sure you have a custom recovery installed (TWRP (or clones) is the preferred recovery) My TWRP: LINK Boot into recovery Wipe dalvik, system, data, cust (vendor), cache partitions If your /data partition secured, maybe need format /data. Flash Rom (sideload or copy SD) Flash Google Apps package (Optional) LINK Flash Magisk Root (Optional) LINK Reboot (If TWRP warn that there is no system, it doesn't matter, go reboot.) First boot may take up to 40 sec to 1 minutes. Boot time 30 sec. There are many tiny, unpleasant bugs in Havoc system, NOT recommended for daily use, maybe just for fanatics. DOWNLOAD V2 ROMDon't need wipe data if upgrade previous Havoc 3. NEW: FM radio fixer LINK (If not working FM radio, install this fixer in TWRP) NEW: dt2w fixed : LINK (Install in TWRP.) V2 Changelog: Power off (offline) charging bug fixed Some camera bug fixed Many system bug fixed Energy consumption is very good The Android system seems stable and fast (Havoc Os not so much ) Know bugs: - no double touch wake up (?) - FM radio - power off charge Update: I found some permission issues. I'm trying to fix it. The camera app does not save images to the SD card... Gallery Go does not handle SD card properly... They don't even ask for permission... Workaround: USE INTERNAL STORAGE for photography, and sometimes move images to SD. * Screenshots: LINK ROM source xda: LINK Havoc-OS source: LINK ROM OS Version: 10.x Q ROM Kernel: Linux 3.x ROM info: mido OFFICIAL port, Q10 system_root partition Created 2019-11-26 V0 version Last Updated 2019-12-06 to V2 version
It looks like I have solved two serious problems. (dex2oat didn't work and neither did ashmem) The system boot is twice as fast, etc. I soon publish the new ROM. Upgrade Out. More stable, fast.
Reboots into fastboot mode My device automatically reboots into fastboot mode after I flashed this. ---------- Post added at 09:48 AM ---------- Previous post was at 09:45 AM ---------- I am using pixel experience ROM currently. When I flashed this my device end up in bootloop. Do I have to be in miui for installing this..??
Redminote5a8 said: My device automatically reboots into fastboot mode after I flashed this. I am using pixel experience ROM currently. When I flashed this my device end up in bootloop. Do I have to be in miui for installing this..?? Click to expand... Click to collapse Thank you your response, ROM V1 fixed, downloadable. (The system partition on my phone was slightly disintegrated, I had to fix it.) Pixel E. ROM is on 4PDA, downloadable. Use a suitable TWRP, pls.
If anybody have downloaded V1, delete it because it is defective. ROM named *V1fix.img works. Sorry. I apologize for the inconvenience.
Hahaha, the camera bug very funny: LINK The camera app save images to folder: sdcard - /Android/data/org.lineageos.snap/files Thnx ****ing org.lineageos.snap app, and i suck...
offline charging bug
Hafitz Setya said: offline charging bug Click to expand... Click to collapse Thank you your responde, i know this bug, i will deal with it, i hope soon.
HAVOC 3.0 ROM V2 2019-12-06 V2 out.
I ended this job for the time being here, I don't got much feedback and thnx (respect the exceptions), and a lot of time goes with it. Sry, bye.
that is a great work hey szanalmas we all on ugglite telegram appreciate your hard and excellent work for bringing stable Q to ugglite thanks is few for you on Xda beacuse almost ugglite useres are on telegram groupe they all ask you to join the group on telegram :good::good::good::good:
szanalmas said: I ended this job for the time being here, I don't got much feedback and thnx (respect the exceptions), and a lot of time goes with it. Sry, bye. Click to expand... Click to collapse i told u to use telegram, people most activates in therre they report bug in telegram
FM radio fixer out. LINK
Dt2w fixer placed out. According to Hafitz Setya, he also works with the my dt2w fixer on Havoc OS. Use it gladly: LINK (Install in TWRP.)
Is this rom work in ugg?
szanalmas said: Dt2w fixer placed out. According to Hafitz Setya, he also works with the my dt2w fixer on Havoc OS. Use it gladly: LINK (Install in TWRP.) Click to expand... Click to collapse It don't work. Only for ambition display. Rom is good, but sometimes slowly. Not work gestures If someone can fix it, I will be happy.. Bluetooth works unstable
Manager_of_Gulag said: It don't work. Only for ambition display. Rom is good, but sometimes slowly. Not work gestures If someone can fix it, I will be happy.. Bluetooth works unstable Click to expand... Click to collapse Try execute 10goodix & turn on emulate init.d in kernel adiutor and reboot and turn off this Sent from my Xiaomi Redmi Note 5A using XDA Labs
Manager_of_Gulag said: It don't work. Only for ambition display. Rom is good, but sometimes slowly. Not work gestures If someone can fix it, I will be happy.. Bluetooth works unstable Click to expand... Click to collapse 1. workaround dt2w: download Ravenge OS (TWRP save) and restore ONLY VENDOR. I integrated dt2w to vendor, but only for PE and subsequent ROMs. 2. workaround (full ROM installer): change the vendor.transfer.list and vendor.new.dat.br files from PixelE to HavocOS (or Arrows, or crDroid) in to the installer zip file. After no need patch for dt2w. Only copy two files to ROM installer zip file. If you want dt2w, you have to disable the double tap on ambient display because two identical functions cannot be interpreted at the same time. Dt2w will be good in every new ROM. I have already stated that Official ROM development is chaotic. The Havoc bug to this day: - no flashing LED for missed calls - Doesn't work with two buttons navigation back sweeping - there is a problem with the bluetooth call - applications are chaotic and inconsistent, with each developer trying their own solutions - etc - developers do not receive meaningful feedback The situation is similar for all AOSP-based ROMs, which may be due to the lack of an official Lineage 17. Google ****ed up sd card permissions. I don't know when a stable AOSP ROM will be available, just wait now...
Hey. After flashing the system asks for a password ?? What the hell?
Repixel said: Hey. After flashing the system asks for a password ?? What the hell? Click to expand... Click to collapse 1. If your phone data was encrypted, you may need to format the data partition. Save all your data first. 2. If a quota was applied to the data partition, it must be removed or formatted. To remove a quota from TWRP: Code: tune2fs -O ^quota /dev/block/bootdevice/by-name/userdata tune2fs -Q ^usrquota,^grpquota /dev/block/bootdevice/by-name/userdata (If you then install a ROM that uses a quota, you will need to uninstall it again to use the quota-free ROM.) 3. Or, put the previous ROM from your backup on your phone and keep using it.