Anti roll back cc9 pro (chines ) - Xiaomi Mi Note 10 Guides, News, & Discussion

Hi,
I got cc9 pro from china, and it's was working fine. But recently google maps, uber stop working, I tried hard find why. I found that the problem is google play services issues. So try some tutorial to fix it and nothing work. Then I thought to intall global rom, I unblock my device, apply the usb debug etc... I download the global rom from xiaomi wesite the version 11.08.0 that realise recently, my device is 11.07.0 and try to install it, but i got the message anit roll back error, I know my device anit rool back number is 2, but the global rom number i can't find it at ''flash-all.bat''. I thought that the global rom version 11.0.8.0 is greater than 11.0.7.0, so was suppost to install it.
The steps that I did
1 - unblock the deivce ( done)
2- set ont usb debugging ( done)
3 - turn off device and turn on flasboot
4 - open mi flash tool - refresh then flash the the ERROR MESSAGE ANTI ROLL BACK
I found that:
if exist %~dp0images\anti_version.txt (for /f "delims==" %%a in (%~dp0images\anti_version.txt) do (set CURRENT_ANTI_VER=%%a))
if [%CURRENT_ANTI_VER%] EQU [] set CURRENT_ANTI_VER=0
for /f "tokens=2 delims=: " %%i in ('fastboot %* getvar anti 2^>^&1 ^| findstr /r /c:"anti:"') do (set version=%%i)
if [%version%] EQU [] set version=0
set anticheck="antirollback check pass"
if %version% GTR %CURRENT_ANTI_VER% set anticheck="Current device antirollback version is greater than this pakcage"
I dont know what to do. Someone know? thank you

Make sure MiFlash is installed in c:\MiFlash and do not install it in a folder with spaces in the name.

dannejanne said:
Make sure MiFlash is installed in c:\MiFlash and do not install it in a folder with spaces in the name.
Click to expand...
Click to collapse
I did it and nothing work. I think this chinese version is impossible to chanto to global rom, and google play does not work too, I can not use maps, uber and other apps anymore.
After corovirus problem spread around my google services stop work, my chinese friend said maybe is CCP blocking something...

miaker said:
I did it and nothing work. I think this chinese version is impossible to chanto to global rom, and google play does not work too, I can not use maps, uber and other apps anymore.
After corovirus problem spread around my google services stop work, my chinese friend said maybe is CCP blocking something...
Click to expand...
Click to collapse
But how it's possible recently I switched Chinese rom [MIUI 12] [A10] to [MIUI 11] [A9] and when I checked my device showing Anti rollback 2. But nothing happened and easily flashed.

Go into fastboot - >
fastboot getvar anti
It will give you the rollback version. Now go into the update folder, where the images (*.img) are, and check the antirollback.txt to see the version of the update. If the update is not smaller than what you have, there won't an antirollb issue.

Related

[Q] Toshiba AC100 and Android Market

Hi,
I own a toshiba ac100-10d which is the model with only wifi (no 3g) and android 2.1, which unfortunately comes with no android market preinstalled. I tried to install one using one of the many packages which you can found online. The problem comes, when I try to login in my gmail account. It says "can't extablish a reliable data connection" and it doesn't login into the account. If I try to login via youtube it creates the account but it doesn't sync it. I have moderate experience with android so you can easily tell me what I have to do. Do you think it would be possible to install the market on this ac100?
Thanks to anyone who will help me!
pipposanta said:
Hi,
I own a toshiba ac100-10d which is the model with only wifi (no 3g) and android 2.1, which unfortunately comes with no android market preinstalled. I tried to install one using one of the many packages which you can found online. The problem comes, when I try to login in my gmail account. It says "can't extablish a reliable data connection" and it doesn't login into the account. If I try to login via youtube it creates the account but it doesn't sync it. I have moderate experience with android so you can easily tell me what I have to do. Do you think it would be possible to install the market on this ac100?
Thanks to anyone who will help me!
Click to expand...
Click to collapse
It would be possible if I can get him into recovery menu. Just working on it as if it could still do that I have uploaded some files to the inside. Root can be done by z4Root 1.3.0.apk. Can be downloaded here http://forum.xda-developers.com/showthread.php?t=834428
I've made some headway
I have installed some files from cyanogenmods tegra compiled gapps + a newer vending.apk(Market) and a diffrent Google Talk app.
I had the same problem you have, but this suddently resolved itself for reasons unknown
Gmail Works and syncs
Google Maps works
Market starts and is stable without forced close, but I can't download apps, and I get Google Talk Authentication errors wich I belive are related to the market issue (the error also appears without the talk.apk installed)
I've got a new talk.apk from a samsung galaxy s, but it will not complete the sign in process
I feel I am really close to cracking this one, but I'm really stuck.
If anyone is interested, I can post which apk files I've installed in the /system/app folder.
Oh, I forgot to say:
I've got the same 10d version without 3g, but mine runs the updated Android 2.2
So it appears that sometimes market init it works, sometimes not ... Strange
I played and did many factory resets to find the right way and now it works (triple checked!)
I have a ac100-114 (French, no 3g), with android 2.2 and rooted with z4root.
(For anyone playing with adb : before doing anything, make backups with the tegra tools, and be careful with this powerful tool!)
I also used a package from cyanogenmod : the gApps from tegra. (http://wiki.cyanogenmod.com/index.php?title=Gapps#Google_Apps)
I looked into gAppsInstaller (here:
http://code.google.com/p/archos-apps-installer/downloads/list and here : http://forum.xda-developers.com/showthread.php?t=867303) to find what are the mandatory apps to install from the gApps cm package:
Into /system/app/
GenieWidget
GoogleBackupTransport
GoogleCalendarSyncAdapter
GoogleContactsSyncAdapter
GoogleFeedback
GoogleServicesFramework
MarketUpdater
MediaUploader
NetworkLocation
Talk
Vending
Youtube *
Into /system/framework/
com.google.android.maps.jar
Into /system/lib/
libspeech.so
libvoicesearch.so
Into /system/etc/permissions/
features.xml
com.google.android.maps.xml
* I had to replace Youtube.apk (in attachment) : I don't know why, but the one from cm is not working and prevent, even without launching it, the login into the market. I retrieved it from my hd2 running android ;-)
Installing maps in /system/app prevents Market initialization.
Then I did a factory reset, followed by the Toshiba first init and wifi configuration.
Now start the Market : nothing else or you might have to factory reset to start over!
Enter a random username (very important!), a random password and click next.
The market should start checking and then tell you the login is wrong : good, it connected !
Now click back, then enter your google account and click next : the Market should accept it and show the license page.
Accept it, the market should appear a few seconds before foreclosing. Launch it again, it will forceclose again.
The third launch should be the right one !
You will get forcecloses right after each app installation, but nothing to worry about : the app stays and appears in the download section of the market
Gmail can be installed from the market.
Your contacts should be synchronized, Talk and Youtube should work.
Problems:
For maps you will have to get the apk somewhere else.
The calendar is missing.
@tharf
Your method works perfectly .. Thx for that. Only problem is that the service framework starts some kind of messaging service and that wakes the ac100 from standby every couple minutes.... I tried fixing that but couldn´t do it... ;0(
So this fix is kind auseless for me...
But keep up the good work... ;0)
FC reason is a
Code:
E/DatabaseUtils( 1547): java.lang.SecurityException: Permission Denial: writing com.google.android.gsf.settings.GoogleSettingsProvider uri content://com.google.settings/partner from pid=10019, uid=10069 requires com.google.android.providers.settings.permission.WRITE_GSETTINGS
for com.android.vending.
Does anyone has an idea how to fix android permissions, as it recreates /data/system/packages.xml if i change it?
Thanks for pointing out where is the FC cause !
I did some more tests, and it seems that if the packages.xml gets modified, followed by sync (just in case, I don't know anything about caching on the ac100), and then a kill -9 -1 is executed, the added permission stays, even if the packages.xml gets scrambled after reboot
For me it works : no more FCs
I found another thing : in order to see apps in the market that asks for the gps (maps, catch notes ...), just had this line to /system/etc/permissions/android.hardware.location.xml, in the <permissions> tag :
<feature name="android.hardware.location.gps" />
(Make a backup of the file first )
So the bottom part of the file should look like :
<permissions>
<feature name="android.hardware.location" />
<feature name="android.hardware.location.network" />
<feature name="android.hardware.location.gps" />
</permissions>
But in order to get it working, you will need to login to the market for the first time, so a factory reset is required
hey, sorry for the dumb question..
i´ve downloade z4root and clicked on temporarly root...after a few
secs the progress ran through and the ac100 rebooted.
now i tried to install the gAppsInstaller v5 for arcors but got the error message, that no files were copied.
how did you do this?
can you please poste a howto for dummies q.q?
you wrote"
Then I did a factory reset, followed by the Toshiba first init and wifi configuration.
Now start the Market : nothing else or you might have to factory reset to start over!"
didnt you install the googlemarket after the reset, did it remain :O?
thanks
Hi,
Good job at first for trying this amazing way to install gapps into Ac100.
In my experience, that method worked well, but it seems, after pushing the mandatory apk files to the system partition, and factory resetting, in the Toshiba device initiation settings, turning on wifi will keep the Google account settings connection from working.
I've been trying many times, only turning on wifi when google login process begins will work.
No idea why that happens.
Regards.
hey gus,
i´ve come this far
ehhm..the files you mentionend.. i have copied them into the right folders, but the won´t get installed, i get parsing errors..
can someone please upload the working files?
working apps:
maps.apk
youtube.apk
..
market on toshiba AC100
Hi Guys
I can confirm that google market is possible on AC100. Also Gmail, Talk and Maps is working fine :
Can anyone please post a guide to get gApps working? (Gmail / Vending) Maps works standalone, but as far as i can see, the others need something!
Like a user above, i can't root my ac-100, it freezes and restart. If it's not rooted, i can't access the folders tharf was talking about in a previous post.
Thanks
Ok, i've managed to solve somethings (hopefully everything)
Unfortunately to root my AC100, i used ADB (I installed SuperOneClick in a previous try, don't know if it helped or not).
ADB is a tool developed inside Android project, that allows developers to test their apps directly on their phones, rather than an emulator. There are plenty of tutorial to get it started, just google it! It's not easy at first, but was the only thing allowed me to copy the files.
For those familiar with this development tool, just plug the device (ac100) in and execute
"adb remount"
in a "cmd" shell (i worked under windows). it magically remounts your system partition in RW, instead of default RO. This way you can "adb push" the files tharf listed in his first post!
Next, follow his indications:
-factory reset (HOME button+POWER button), follow the system reset, press 1 to continue, wait a few minutes and it will reboot on his own, give it time.
-configure ac100, like the first time
-connect it to wifi
-open Market App (you'll find it on the Toshiba Home menu, in the end)
-connect with random user, let it fail the authentication, the use a real one, and you're good to go!
I installed a few apps, so far so good. Only thing to keep in mind: Market launches an error after installing an app. No worries, it's fine: just press OK and go on.
I was interested in Gmail app, so i "adb push"ed it from the beginning, and it worked at first try. Same for Talk, Contacts, Youtube and Maps (find the apk, it's not hard )
Thanks to all, hope this could help.
Toshiba AC100
I've afforded this laptop two days and so far where i updated and hadded
the portuguese language, but when i when in settings->language it simples does not exist.
I dont have anything against english, but i need at least the ortography.
I could use spannish but i rather have english
Every time I run market/gtalk,I get this Message:
"Can't establish a reliable data connection to the server. If it continues, call Customer Care."
Thnx a lot - got Market, Gmail, Maps, ... working too. Have only tested it for some minutes - but hope it will work forever
Very good especially as the Toshiba AC100 10V with UMTS is now really cheap here.
Still have the Market problem with crash after install/deinstall of an app.
Anyone tried the newer GoogleApps for Tegra from here? http://forum.xda-developers.com/showthread.php?t=912633
I tried to get rid of the market crash. So I did the following:
adb shell connect to /data/system after root
chmod 777 packages.xml
sync
kill -9 -1
But that didn't work I still get the crashes. Can you help me with more details what you mean with 'the added permission stays'?
Thanx in advance.
Firmware from the Russian community users of the AC100 Toshiba (android 2.2) All Google applications work fine(Market+Gmail+Tack)!
Different from the standard:
1. Root
2. Busybox 1.19
3. Google Apps, including the latest market (by 116(Toshiba AC 100-116- russian 3G+Wi-Fi+32Gb model) runs without any problems), SetupWizard works too
4. Jorte - perfect replacement calendar from Google, beautiful, seeing all the calendars
5. Ad Blocking
6. Titanium Backup
7. Terminal Emulator
8. New splash screen
9. Spare Parts
10. Easy selection of widgets
Installation in Windows:
1. Download the firmware
2. Unpack
3. Translating the device in boot mode (turn off, esc + control + power)
4. Install the driver from the archive
5. Run bat file from the archive (ac100flash.cmd)
6. We are waiting for the end of the loading and turning off the device while holding the button 10 seconds
7. Turn device, answer all the questions for 116 checking in via 3G.
8. Enjoy.
Torrent: ****://rutracker.org/forum/viewtopic.php?t=3498125
Firmware+drivers ****://narod.ru/disk/8503508001/ac100_flash.rar.html
Firmware(update) ****://narod.ru/disk/8819504001/ac100flash_v2.rar.html
Спасибо форуму ****://4pda.ru/forum/index.php?showtopic=226289&st=40#entry7000473

[Q] Can someone post Mediapad X1 international ROM?

I bought a Mediapad X1 from China via AliExpress.
I cannot make anything from a limited Chinese ROM.
Anybody who has international ROM or can extract it from the international version, please help!
satawat.thongsawat said:
I bought a Mediapad X1 from China via AliExpress.
I cannot make anything from a limited Chinese ROM.
Anybody who has international ROM or can extract it from the international version, please help!
Click to expand...
Click to collapse
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
gregou said:
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
Click to expand...
Click to collapse
Does it sync your Google contacts correctly? If so, what did you need to do to get that working?
gregou said:
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
Click to expand...
Click to collapse
Thank you for the reply, some questions:
1. So, yours is also a Chinese version?
2. Please post the link for rooting.
3. After rooting, install the GApp, version for 4.2.2? And then we can go for anything, like Nova launcher?
satawat.thongsawat said:
Thank you for the reply, some questions:
1. So, yours is also a Chinese version?
2. Please post the link for rooting.
3. After rooting, install the GApp, version for 4.2.2? And then we can go for anything, like Nova launcher?
Click to expand...
Click to collapse
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address : http://www.shuame.com/en/root/
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
http://consumer.huawei.com/cn/mobile-phones/support/downloads/honour-x1-cn.htm
vyming said:
http://consumer.huawei.com/cn/mobile-phones/support/downloads/honour-x1-cn.htm
Click to expand...
Click to collapse
This is a Chinese ROM?
gregou said:
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address : http://www.shuame.com/en/root/
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
Click to expand...
Click to collapse
@gregou
I cannot get into download mode to install Gapps via odin.
Also cannot find recovery mode???
How to install Gapps,then??
satawat.thongsawat said:
@gregou
I cannot get into download mode to install Gapps via odin.
Also cannot find recovery mode???
How to install Gapps,then??
Click to expand...
Click to collapse
When the phone reboot, after you renamed the file, gapps are automatically installed by the phone.. You don't have to use recovery mode at all !!
And for now, i'm not sure that CWM is available for this model... I think i saw it on a chinese forum but when i translate it's too messy and i have to be registered on this forum to download it so... we have to wait that someone make a post here in english with th e CWM in download...
gregou said:
When the phone reboot, after you renamed the file, gapps are automatically installed by the phone.. You don't have to use recovery mode at all !!
And for now, i'm not sure that CWM is available for this model... I think i saw it on a chinese forum but when i translate it's too messy and i have to be registered on this forum to download it so... we have to wait that someone make a post here in english with th e CWM in download...
Click to expand...
Click to collapse
Okay, I see the point, we just install portions of Google apps we need, starting with play store, the any thing you need.
I do hope we'll have CWM, or at least hardware ways to boot into download and recovery mode.
The KitKat may be far from reality?
satawat.thongsawat said:
Okay, I see the point, we just install portions of Google apps we need, starting with play store, the any thing you need.
I do hope we'll have CWM, or at least hardware ways to boot into download and recovery mode.
The KitKat may be far from reality?
Click to expand...
Click to collapse
We'll get Kikat firmware on this phone for sure, we just have to wait from Huawei to rolling out this version.
It's not portions of google apps as when you do this procedure i explained, ALL the gapps are installed automatically on the phone.
Basically, Huawei made a script in the phone for not allowing these apps to be installed, but when you rename this file, the script is no longer available, then all the gapps are installing after the next reboot !
Mediapad X1 7D-503L
The only deference is the directory:
/ cust / channel / charm_china_l / xml / ( charm_china_l not charm_china_u)
and i use the command as su
mount -o rw,remount -t rootfs /cust
because when It try to rename the UNSTALL_APK.XML I take the error "Read-only file system"
thanks
X1 undetectable by the PC
I have GApps Syncing quite fine without rooting, except the contacts sync which is missing from the sync list. I see your steps are very straight forward, but unfortunately my X1 is not recognized by the PC, although I've installed HiSuite from Huawei website. I've also tried to install Huawei device driver for X1 from this site, but still unrecognized. Accordingly GeniusRoot is unable to detect and root my X1.
I'm Win 8.1 (both 32 and 64 bits), and I've tried to do all these procedures with Compatibility model for Win7, run as administrator, yet the X1 is till not detected by the PC.
Also USB Debugging is enabled in Developer Options.
Any idea what's the reason for this?
More info about my version:
Baseband: 21.529.00.00.000
Kernel: 3.0.8-01317-gcd83a45 [email protected] #1
Build Number: 7D-501uV100R001C233B013
gregou said:
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address :
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
Click to expand...
Click to collapse
Thanks for the awesome tutorial bro
I've managed to root the phone, installed es files explorer. Double checked with root checker and confirmed root
But I'm stuck with renaming the file...
And the folder have a slightly different name but that is the only folder I've got..
/cust/channel/charm_china_l/xml/ (yours is china_u)
So, everytime I rename the file it keeps on giving error task failed. I've checked in properties and it says readable:yes writable:yes
I can't delete the file as well the error says unstall_apk.xml cannot be deleted
can u help please
thanks in advance :good:
sordanny said:
Thanks for the awesome tutorial bro
I've managed to root the phone, installed es files explorer. Double checked with root checker and confirmed root
But I'm stuck with renaming the file...
And the folder have a slightly different name but that is the only folder I've got..
/cust/channel/charm_china_l/xml/ (yours is china_u)
So, everytime I rename the file it keeps on giving error task failed. I've checked in properties and it says readable:yes writable:yes
I can't delete the file as well the error says unstall_apk.xml cannot be deleted
can u help please
thanks in advance :good:
Click to expand...
Click to collapse
OK I managed to figure out the solution
Used Root File Manager to rename and voila!! Renamed the file, restart device and got all the Google stuff setup on the phone
Now there is this second problem which is a big pain in the arse
I can't add a second Google account on the phone to get all my contacts..........
Under settings -> accounts -> add account -- there is no option to select "Google" !!!!
Have anyone also face this problem and is there any solution??
Thanks in advance for the help
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. Click on the big Google banner at the top of the page. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
ralphrmartin said:
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
Click to expand...
Click to collapse
I can confirm this is true. I did a search for "gms" rather than Google - tap on the big link you get at the top of the results page, which takes you to a page of all the Google apps and services, and install everything! (You can always uninstall what you don't need later). No root required, and everything is syncing properly - calendar, contacts, tasks etc. Super easy.
ralphrmartin said:
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. Click on the big Google banner at the top of the page. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
Click to expand...
Click to collapse
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
DannyBoy said:
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
Click to expand...
Click to collapse
Have you got Google Contacts Sync in your list of downloaded apps?
DannyBoy said:
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
Click to expand...
Click to collapse
Danny here's how to fix it, and u don't need root
if u have rooted and edited the unstall_apk.xml, best is download and flash the stock ROM first:
http://consumer.huawei.com/cn/support/downloads/detail/index.htm?id=20241 (click 立即下载 on the right)
u can also ignore it but all preinstalled google apps will become system apps, and if u've deleted some huawei bloatware u might not be able to OTA update latest B006 firmware
All the Google stuff can work perfectly even can add multiple Google accounts. Best thing is, u don't need root. Here's how:
1) Go to app centre - all - brand and look for the one with 谷歌 (sorry I've updated app centre and it might be different if u haven't update)
2) Download 联系人同步服务, 日历同步服务, Google Playstore, Gmail and Google plus. The rest can be downloaded from playstore
3) After install, open either playstore or gmail and sign in
At this stage, Google is already setup properly with contacts sync just it cannot add multiple Google accounts. Workaround:
4) Open Google plus. Settings - add account
And voila. The phone is perfect now
There's also an OTA update for the LTE version which updates your phone firmware to 7D-503LV100R001C233B006
Cool new features includes double tap screen on, some control over notification flash light for messages and background battery optimization :good:

[GUIDE] A320FL Debloat No root Oreo

Hello,
I've debloated a Samsung SM-A320FL for work, so I though I should share my method with you.
It needs no special knowlegde, no root so you won't loose any warranty or so.
1 - First of all, you need to install ADB on your PC (You can find how to do it here).
2 - Then activate developper options on the phone. Go to:
Parameters/about phone/software informations
and tap 7 times on "build version"
3 - Still on the phone, go back to parameters and to "developper options". Activate "USB debogging mode"
4 - Plug the phone to the PC and athorize the connection
5 - Launch the adb console as administrator and type "adb shell"
6 - Paste the content of the file linked to this post and press enter
Your A3 has now only those apps:
- My files
- Play Store
- Phone
- Messages
- Camera
- Gallery
- Clock
- Contacts
- Parameters
- Calculator
Off course you can now desactivate "USB debogging mode" and "developper mode", so your phone seem to be factory done like that by Samsung.
Can I do this on Linux?
livelife01 said:
Can I do this on Linux?
Click to expand...
Click to collapse
Yes, you can. Just install ADB.
Hello,
does the phone needs to be in download mode?
Thank you sir, works like a charm on the official firmware.
Hello,
does the phone needs to be in download mode?
Click to expand...
Click to collapse
No
Hello, seem's working but i have again apps on phone. In application list, i see them again with "not installed" mentionned.
How can i delete them definitively to gain space.
kagazushi, are you french ? i see SFR apps
Best regards.
adb shell pm disable-user --user 0 <package_to_disable>
For some reason, the disable-user command lets you disable basically any application you want while the regular disable command is quite limited.
Hi
do you still have voLTE once all these stuffs are gone ?
Thanks a lot for this debloater !
(edit : it's ok, I still have voWIFI & voLTE after debloating)
so does this still work on the latest firmware? Is it really safe?
Thanks, saved my device from the ever overloaded internal memory. As it's for personal use I kept (or rather reinstalled) email, calendar, photoretouching, smartmirroring, google drive (aka .docs) and google maps (some may want to keep videos and youtube too).
I only have one issue so far:
gallery app crashes when i want to check image details and under albums it only shows me camera roll, but none from other folders.
despite reinstalling smartmirroring, the screen-mirroring icon disappeared from the slide-down menu [stupid me had installed mirrorlink instead of smartmirroring]
It would be great, if someone could tell what dependencies the gallery app has to access file info and to create these folder albums. So i can reinstall the needed stuff. My phone feels so much snappier now and i certainly won't go back to reinstall all of them just to get that Samsung gallery and screen mirroring to work properly. Thanks again to the OP.
knopper84 said:
so does this still work on the latest firmware? Is it really safe?
Click to expand...
Click to collapse
yes, did it yesterday on a completely updated phone. It just didn't remove samsung pay and linkedin bloatware on my device - not a big issue.
Anybody using Android Auto after debloating? Issues?
Thanks

[help] Xiaomi redmi note 4 go boot loop after turn on wifi

Hi
today when i turn on wifi , xiaomi redmi note 4 , my phone go boot loop and after turn off , stoped and phone worked
can help me please?
phone not rooted
miui v 10.2.1.0
Same situation today!
Phone boot success for 0.5 sec (till home screen) and go to reboot and freeze.
Russian Putin blocked phones?))
Fixed here: https://4pda.to/forum/index.php?showtopic=770174&st=3960#entry113522042
You can use Google translate
1. Download Install Vcom MTK Driver support MT6797 (disable driver signature win 10)
2. Download Install CDC Driver MTK (disable driver signature win 10)
3. Download install NVRAM Backup Tools (miracle tool or etc)
4. Download SP Flashtool V5.612
5. Download Fastboot ROM V8.1.4 or 8.2.1
7. Backup NVRAM
8. Flash Your Nikel (wrong preloader make your Nikel hardbrick)
9. Fix Imei & NVRAM Data if this lost after flashing (fix with MAUI META 10 or SN WRITER)
10. if you want UBL without Auth Permission or disable Mi Account download install TFT MTK Tool V3.5
11. Do Not Update Your Nikel with MIUI 10.2.1 (if you want use it go to modding thermal config)
12. Sell your Nikel
Flo_dWild said:
1. Download Install Vcom MTK Driver support MT6797 (disable driver signature win 10)
2. Download Install CDC Driver MTK (disable driver signature win 10)
3. Download install NVRAM Backup Tools (miracle tool or etc)
4. Download SP Flashtool V5.612
5. Download Fastboot ROM V8.1.4 or 8.2.1
7. Backup NVRAM
8. Flash Your Nikel (wrong preloader make your Nikel hardbrick)
9. Fix Imei & NVRAM Data if this lost after flashing (fix with MAUI META 10 or SN WRITER)
10. if you want UBL without Auth Permission or disable Mi Account download install TFT MTK Tool V3.5
11. Do Not Update Your Nikel with MIUI 10.2.1 (if you want use it go to modding thermal config)
12. Sell your Nikel
Click to expand...
Click to collapse
Your variant doesnt save user data
but better, because I cant to dosable google play services update now
In case of bootloop on wifi connect I found out its related to location service of Google Play Services
You must go to phone settings > installed app
Then in three dot menu, make sure show all apps selected (after select text of menu becomes hide system app)
Go to Google Play Services > App permissions > tap on location > in the dialog box click location settings > set this to device only
Now most probably you can turn your wifi on
I hope you succeed in task
Note:
Its probably a bug in Google Play Services and will be fix soon, don't forget to update it after 1 months and reconfig the option we have changed and see if it works or not
(I think it's related to sanctions or censorship in Russian in that bloody war)
mahpooya said:
In case of bootloop on wifi connect I found out its related to location service of Google Play Services
You must go to phone settings > installed app
Then in three dot menu, make sure show all apps selected (after select text of menu becomes hide system app)
Go to Google Play Services > App permissions > tap on location > in the dialog box click location settings > set this to device only
Now most probably you can turn your wifi on
I hope you succeed in task
Note:
Its probably a bug in Google Play Services and will be fix soon, don't forget to update it after 1 months and reconfig the option we have changed and see if it works or not
(I think it's related to sanctions or censorship in Russian in that bloody war)
Click to expand...
Click to collapse
Thank you my consecrated noble, thanks to that, I can continue using my beloved cell phone. I will stay tuned for updates on this error. Brazilian hugs to all. huehue
mahpooya said:
In case of bootloop on wifi connect I found out its related to location service of Google Play Services
You must go to phone settings > installed app
Then in three dot menu, make sure show all apps selected (after select text of menu becomes hide system app)
Go to Google Play Services > App permissions > tap on location > in the dialog box click location settings > set this to device only
Now most probably you can turn your wifi on
I hope you succeed in task
Note:
Its probably a bug in Google Play Services and will be fix soon, don't forget to update it after 1 months and reconfig the option we have changed and see if it works or not
(I think it's related to sanctions or censorship in Russian in that bloody war)
Click to expand...
Click to collapse
Thank a lot. Love you.
Hi I am in the same boat Note 4 nikel, when I turn on GPS, bootloop is happening
I have no problen turning wifi on, the phone is working fine.
In my case it has to do with Gps, and location services
Has anyone found a solution today?
No real solution yet. Only partial as mention above: to stop boot loop quickly enter to airplane mode. After go to settings search location
in location change from high accuracy to gps this device only. Exit airplane mode. Now every thing work but you loose high accuracy navigation
So i find this link for Redmi Note 4 in
Firmware Redmi Note 4 MTK Untuk Yang Bootloop, Restart Terus Dan Bisa Buka Gps Akurasi Tinggi, Gojek Dan google Map
Download firmware redmi note 4 mtk miui 10, nikel atau 4x ini file khusus untuk hape yang bootlop bandel dan restart terus menerus
www.joelzr.com
I've installed it using spflashtool .. It worked for high accuracy navigation .. It only in english and chineese ..
Reuploaded the file in here ..
1.99 GB folder on MEGA
6 files
mega.nz
After a successfull flash .. Install the google installer apk .. And install your desired app .. And because google play took sooooo long to download app ( maybe my network signal ) .. I download the apk manualy from browser and install them ..
Works fine on my Redmi Note 4 .. Only reboot once ( don't know what happen) and no more ..
Sorry for my english ..

How To Guide Change region via Full OTA.

Change your region via full OTA.
You do everything at your own risk, I am not responsible for any damages. The Chinese version cannot be changed in this way, please use this guide.
This guide allows you to change region within one Android version or upgrade without unlocking the bootloader. Android 13 prepackaged OTA files for India and EU regions will be listed here. If you want to switch to another region, you can ask the author of the post or edit the OTA file yourself according to this guide.​According to this guide, user data will not be deleted.
Spoiler: Editing the payload-properties.txt file in full OTA
Download the full OTA from this link Move it to your device's internal memory To edit you will need an advanced device manager that you can download from the Play Store
Through the file manager, we find the OTA file that we are going to edit. Click on the file and open it in the manager, 3 files will open. Click on payload-properties.txt and change the line oplus_update_engine_verify_disable=0 to 1
We save in the upper right and you leave. The edited file will update in about 3 minutes. There may be an update error and there will be two zip archives in the folder, nothing wrong with that! We will keep both files but select the file without tmp to update.
Instructions : 1. Download the full OTA of the desired region and put it in the root directory of the internal memory.
RMX3301_11_C.20_IN
RMX3301_11_C.19_EUEX
RMX3301_11_C.19_RU
2. Installation of the OPLocal_ Update application. Go to your smartphone's settings, then Apps > Management. applications, 3 dots and check Show System ! Look for SOFTWARE UPDATE and clear this app's cache and data! Then install the OPLocal_ Update app for Android 12 or 13 (choose the version that is current on the device)
OPLocalUpdate_For_Android12.apk
OPLocalUpdate_For_Android13.apk
3. Installing an update through a third-party application! Next, open the app we installed and update it through it (gear top right and select the .zip file in the root directory of the internal memory), an installation window should appear! If everything is fine, the process will start and you will be prompted to restart your smartphone after installing the update. Installation takes 20-30 minutes.
After restarting your smartphone, you are in a new region.
It is recommended to flash the firmware file twice to flash both slots!
Many thanks to 4pda forum members KRD_RUS and [email protected] who created the tutorials.
Spoiler: Video instructions
Excellent tutorial. This was the only way possible, I was able to change the Rom from Global (previously Chinese) to INDIA region.
Thanks pal for all your help!
What is the point of changing to India region? Does the india rom have built in call Recorder?
I chose these regions because of the GDPR version and export.
Call recording has RU version.
Stano36 said:
I chose these regions because of the GDPR version and export.
Call recording has RU version.
Click to expand...
Click to collapse
Only RU has call Recorder?
How does this affect ota security updates?
The RU version has recording for sure.
OTA will run smoothly.
With this procedure I won't need to unlock the bootloader? So does that mean that NFC and banking apps don't work perfectly?
Yes, they will work without problems.
Hello
You only linked India and EU roms, is the RU rom available somewhere ?
Link added
from IN C12 my can't transfer through EUEX C12 this way? Thanks
You can
Does Russia have C 12 or only C 08 because Realme wont update due those stupid sanctions?
The Realme server only offers C.08, but C.12 should arrive by air.
Hi! I'm on GDPR version (GT2 RMX3311) and I wold like to unlock the bootloader by switching region to India, unlock via deep testing apk, and flash back the GDPR firmware, will this work? Will the bootloader remain unlock if I flash gdpr fw back?
Tried it, it doesn't work for GT 2.
@daniml3 tried it
So, I flashed the Indian ROM and all was fine, except that RIL didn't work, so l didn't have a working SIM and neither an IMEI, so I couldn't unlock the bootloader as it needs a working IMEI for that.
Click to expand...
Click to collapse
Has anyone tried to use the (RMX3311) "modem.img" in the (RMX3312) "payload.bin" and then to flash the RMX3312 FW on the RMX3311 GT2 ?
RMX3311 said:
Has anyone tried to use the (RMX3311) "modem.img" in the (RMX3312) "payload.bin" and then to flash the RMX3312 FW on the RMX3311 GT2 ?
Click to expand...
Click to collapse
I don't know about it
Thank you so much !
According this method, the Taiwan Ver. was successfully converted to the India Ver. Install google play coloros Phone APP. can automatically record calls
I have downloaded the firmware file and placed it in the root folder, but the updater still says "Move installation package into root directory".
Help would be appreciated. Thanks.

Categories

Resources