Related
Ok thought i would post my own thread to see if anyone can help me.
I have a S3 from Three UK. Was running on stock Three rom. I flashed it with the latest non branded S3 rom. Now the WB-AMR setting is off and i cannot turn it on even though it was on as default in the Three branded rom.
What i want to know is will the WB-AMR only be switched on on the Three branded rom or could i for example keep the unbranded rom but flash the Three CRC to get the hd voice enabled? Or is this setting contained within the actual rom itself, therefore i would need to go back to the branded rom to obtain the hd voice? Im slightly confused. Any help appreciated.
CSC can be flashed as standalone. See the rom guide.
jje
Sent from my GT-I9300 using xda premium
JJEgan said:
CSC can be flashed as standalone. See the rom guide.
jje
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Sorry i already know this (should have said) but is the HD Voice option stored on the actual rom or the csc? Dont want to flash the CSC to the stock branded Three rom incase it doesnt work then i have to install everything again. What exactly does the CSC do?
http://forum.xda-developers.com/showthread.php?t=1671969
CSC
Probability is that the network have put any add ons in the cache file part of the CSC file .
CSC files can be opened for a look see .
Cache extractor post in dev section probably .
jje
Opened a 3 CSC and it shows as below in part other networks have no mention of WBAmr .
It also has an MH 20 -ICS-HHp application in the add on apps folder .
-<FastDormancy> <NetworkName>3</NetworkName> <FastDormancyEnableStatus>on</FastDormancyEnableStatus> <LCDStatus>on</LCDStatus> </FastDormancy> -<FastDormancy> <NetworkName>3</NetworkName> <FastDormancyEnableStatus>on</FastDormancyEnableStatus> <LCDStatus>off</LCDStatus> </FastDormancy> <NbWbAmr>1</NbWbAmr> -<WbAmr> <NetworkName>3</NetworkName> <WbAmrCodec>on</WbAmrCodec> </WbAmr> <NbSOSNumber>3</NbSOSNumber> <SOSNumber>999</SOSNumber> <SOSNumber>911</SOSNumber> <SOSNumber>112</SOSNumber>
JJEgan said:
Opened a 3 CSC and it shows as below in part other networks have no mention of WBAmr .
It also has an MH 20 -ICS-HHp application in the add on apps folder .
-<FastDormancy> <NetworkName>3</NetworkName> <FastDormancyEnableStatus>on</FastDormancyEnableStatus> <LCDStatus>on</LCDStatus> </FastDormancy> -<FastDormancy> <NetworkName>3</NetworkName> <FastDormancyEnableStatus>on</FastDormancyEnableStatus> <LCDStatus>off</LCDStatus> </FastDormancy> <NbWbAmr>1</NbWbAmr> -<WbAmr> <NetworkName>3</NetworkName> <WbAmrCodec>on</WbAmrCodec> </WbAmr> <NbSOSNumber>3</NbSOSNumber> <SOSNumber>999</SOSNumber> <SOSNumber>911</SOSNumber> <SOSNumber>112</SOSNumber>
Click to expand...
Click to collapse
So would i be correct in thinking that flashing the original Three CSC will give me back my HD voice and i can use this in conjunction with the latest unbranded rom? If i done this would i be able to continue to get updates via Kies or OTA or would this cease seeing as im not using the supplied CSC with the rom?
Thanks for your help btw. Appreciate it :good:
Ok i flashed the stock Three CSC but when i go into change the CSC it still lists the same options as before. I.E BTU,CPW,DBT,ITV,KOR,XEF,XEO.
Phone is still on CSC I9300OXABLG8. Im even more confused now.
Ok spent more time with the phone and managed to get the Three CSC onto the phone with the latest unbranded firmware. It didnt however re-enable WB-AMR (HD VOICE) so i flashed it back. It would appear that it is enabled in the rom. Why it isnt enabled as standard i have no idea seeing as the phone supports it.
What are you doing to check and enable the setting? And did flashing the CSC wipe your device?
I don't understand why Samsung have disabled WB-AMR on unbranded devices.
The hardware obviously supports this feature, so why not at least have it as a settings option? Most networks here appear to support it.
I'm also with THREE UK and I'd like to use HD-Voice, but WB-AMR is disabled.
The phone is smart enough to load all the other settings (e.g. service centre numbers) related to my network, so why not WB-AMR?
Yes, I know I could flash a different ROM, but I don't want the operator bloatware or any theoretical risk of losing warranty.
AMoosa said:
What are you doing to check and enable the setting? And did flashing the CSC wipe your device?
Click to expand...
Click to collapse
I was going into the service menu via the code i found on here. There is no option to turn on WB-AMR. I can see the menu but pressing Audio doesnt do anything and when i go into the WB-AMR menu it is turned off with no way to re-enable it.
Flashing the CSC did wipe my device.
Im still waiting on Samsung to get back to me. Over a week now with no reply from them.
djstevie said:
I was going into the service menu via the code i found on here. There is no option to turn on WB-AMR. I can see the menu but pressing Audio doesnt do anything and when i go into the WB-AMR menu it is turned off with no way to re-enable it.
Flashing the CSC did wipe my device.
Im still waiting on Samsung to get back to me. Over a week now with no reply from them.
Click to expand...
Click to collapse
What code did you use to bring up the service menu. Im on a JB rom and the ones i've tried give the error "Connection problem or invalid MMI code"
1-be sure that THREE support HD Voice
2-flash the latest THREE stock rom
3-root it
4-copy the /system/csc folder and the /system/SW_Configuration file to your external SDcard
5-remove all the bloatware apk (also look for branded bootanim, ringtones, ...) from the csc folder on your external SDcard
6-flash the stock rom you want
7-root it
8-delete all the content of your /System/csc folder
9-now push back the content of the folder and the file you have previously copied on your external SDcard
10-now you have to make a hard reset to aplly the CSC settings. There is 2 way for that depending on what was in the THREE /system/csc folder
10a-first way: open dialer and dial *#272*YOURIMEI# and select your CSC and hit "apply"
10b-second way (only if first one does not work): restart in recovery and make a factory reset
11-you're done
You should now be with your unbranded rom without THREE customization but with THREE csc settings (APN, HD Voice, Fast Dormacy, ...)
I do that on my phone and I now run Stock XXBLG8 with SFR (french carrier) settings and no bloatware or customization
Thanks Mopral i had seen you posting that in another thread but it isnt suitable for myself. I dont fancy having to do that everytime a new firmware is out , i quite like getting OTA updates with limited hassle. It is a solution but one we shouldnt have to do considering the phone and my carrier support HD voice.
*#197328640# is the code i used to get into the service menu. Im still on ICS so no idea if it works with JB.
There has GOT to be a way to turn on the setting without flashing CSC....
AMoosa said:
There has GOT to be a way to turn on the setting without flashing CSC....
Click to expand...
Click to collapse
Not sure...
It seems that there is no access to this settings on the SGS3
So until someone find a solution, there is only the hard way...
From the Three Website:
What do I need to get HD Voice?
HD Voice capable phone
A phone that originated from Three (unlocked phones now being used on Three won’t work)
The latest phone software available
Calling on the Three network
Although I do agree there has to be an easier way to enable this if anyone knows could you please pm me. Thanks!
Apologies for the bump, but this has been a VERY useful thread for me today, and I wanted to add something.
I had been using CM10 for a while which supports HD voice without any issues (CSC is only for Samsung ROMs) but then I moved to Omega ROM for various reasons, and the one thing I missed was HD voice.
I managed to get it working, based on Mopral's excellent steps below, but without wiping my internal memory and also without wiping data.
Mopral said:
1-be sure that THREE support HD Voice
2-flash the latest THREE stock rom
3-root it
4-copy the /system/csc folder and the /system/SW_Configuration file to your external SDcard
5-remove all the bloatware apk (also look for branded bootanim, ringtones, ...) from the csc folder on your external SDcard
6-flash the stock rom you want
7-root it
8-delete all the content of your /System/csc folder
9-now push back the content of the folder and the file you have previously copied on your external SDcard
10-now you have to make a hard reset to aplly the CSC settings. There is 2 way for that depending on what was in the THREE /system/csc folder
10a-first way: open dialer and dial *#272*YOURIMEI# and select your CSC and hit "apply"
10b-second way (only if first one does not work): restart in recovery and make a factory reset
11-you're done
You should now be with your unbranded rom without THREE customization but with THREE csc settings (APN, HD Voice, Fast Dormacy, ...)
I do that on my phone and I now run Stock XXBLG8 with SFR (french carrier) settings and no bloatware or customization
Click to expand...
Click to collapse
Here's what I did:
1. Used the code *#197328640# to get to the service menu. [8] WB-AMR Status showed "WB-AMR Setting: OFF".
2. Did a nandroid backup of my current Omega ROM v30 (DLJ2) setup using CWM Touch 6.0.1.2.
3. Flashed the I9300XXDLJ1 Three UK official stock Jelly Bean release found in this thread using MobileODIN (checking all EverRoot and SU Injection options).
4. Using Root Explorer, copied /system/csc folder and the /system/SW_Configuration file to my external SDcard.
5. Did a nandroid restore of my current Omega ROM v30 setup using CWM Touch 6.0.1.2.
6. Using WinRAR on my PC, I created a copy of the Omega ROM v30 zip file and deleted the contents of /system/app. Then I dragged and dropped the files from my external SDcard into the zip file to this location (using the "Add and Replace" feature of WinRAR). Did the same for the /system/SW_Configuration file.
7. Flashed this new customised Omega ROM zip over the top of my existing setup that I had just nandroid restored. I did NOT wipe data.
8. After booting, I used the code *#197328640# to get to the service menu again. [8] WB-AMR Status now shows "WB-AMR Setting: ON". Rang my wife on her S3 to test it, HD voice working perfectly!
I hope somebody finds this useful.
I have flashed the official 3 JB ROM using ODIN, so have the 3 CSC. I did not wipe. However, HD-Voice is still off. If I do a factory reset, will it get switched on?
AMoosa said:
I have flashed the official 3 JB ROM using ODIN, so have the 3 CSC. I did not wipe. However, HD-Voice is still off. If I do a factory reset, will it get switched on?
Click to expand...
Click to collapse
yes it will switch it on.
I bought a Mediapad X1 from China via AliExpress.
I cannot make anything from a limited Chinese ROM.
Anybody who has international ROM or can extract it from the international version, please help!
satawat.thongsawat said:
I bought a Mediapad X1 from China via AliExpress.
I cannot make anything from a limited Chinese ROM.
Anybody who has international ROM or can extract it from the international version, please help!
Click to expand...
Click to collapse
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
gregou said:
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
Click to expand...
Click to collapse
Does it sync your Google contacts correctly? If so, what did you need to do to get that working?
gregou said:
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
Click to expand...
Click to collapse
Thank you for the reply, some questions:
1. So, yours is also a Chinese version?
2. Please post the link for rooting.
3. After rooting, install the GApp, version for 4.2.2? And then we can go for anything, like Nova launcher?
satawat.thongsawat said:
Thank you for the reply, some questions:
1. So, yours is also a Chinese version?
2. Please post the link for rooting.
3. After rooting, install the GApp, version for 4.2.2? And then we can go for anything, like Nova launcher?
Click to expand...
Click to collapse
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address : http://www.shuame.com/en/root/
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
http://consumer.huawei.com/cn/mobile-phones/support/downloads/honour-x1-cn.htm
vyming said:
http://consumer.huawei.com/cn/mobile-phones/support/downloads/honour-x1-cn.htm
Click to expand...
Click to collapse
This is a Chinese ROM?
gregou said:
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address : http://www.shuame.com/en/root/
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
Click to expand...
Click to collapse
@gregou
I cannot get into download mode to install Gapps via odin.
Also cannot find recovery mode???
How to install Gapps,then??
satawat.thongsawat said:
@gregou
I cannot get into download mode to install Gapps via odin.
Also cannot find recovery mode???
How to install Gapps,then??
Click to expand...
Click to collapse
When the phone reboot, after you renamed the file, gapps are automatically installed by the phone.. You don't have to use recovery mode at all !!
And for now, i'm not sure that CWM is available for this model... I think i saw it on a chinese forum but when i translate it's too messy and i have to be registered on this forum to download it so... we have to wait that someone make a post here in english with th e CWM in download...
gregou said:
When the phone reboot, after you renamed the file, gapps are automatically installed by the phone.. You don't have to use recovery mode at all !!
And for now, i'm not sure that CWM is available for this model... I think i saw it on a chinese forum but when i translate it's too messy and i have to be registered on this forum to download it so... we have to wait that someone make a post here in english with th e CWM in download...
Click to expand...
Click to collapse
Okay, I see the point, we just install portions of Google apps we need, starting with play store, the any thing you need.
I do hope we'll have CWM, or at least hardware ways to boot into download and recovery mode.
The KitKat may be far from reality?
satawat.thongsawat said:
Okay, I see the point, we just install portions of Google apps we need, starting with play store, the any thing you need.
I do hope we'll have CWM, or at least hardware ways to boot into download and recovery mode.
The KitKat may be far from reality?
Click to expand...
Click to collapse
We'll get Kikat firmware on this phone for sure, we just have to wait from Huawei to rolling out this version.
It's not portions of google apps as when you do this procedure i explained, ALL the gapps are installed automatically on the phone.
Basically, Huawei made a script in the phone for not allowing these apps to be installed, but when you rename this file, the script is no longer available, then all the gapps are installing after the next reboot !
Mediapad X1 7D-503L
The only deference is the directory:
/ cust / channel / charm_china_l / xml / ( charm_china_l not charm_china_u)
and i use the command as su
mount -o rw,remount -t rootfs /cust
because when It try to rename the UNSTALL_APK.XML I take the error "Read-only file system"
thanks
X1 undetectable by the PC
I have GApps Syncing quite fine without rooting, except the contacts sync which is missing from the sync list. I see your steps are very straight forward, but unfortunately my X1 is not recognized by the PC, although I've installed HiSuite from Huawei website. I've also tried to install Huawei device driver for X1 from this site, but still unrecognized. Accordingly GeniusRoot is unable to detect and root my X1.
I'm Win 8.1 (both 32 and 64 bits), and I've tried to do all these procedures with Compatibility model for Win7, run as administrator, yet the X1 is till not detected by the PC.
Also USB Debugging is enabled in Developer Options.
Any idea what's the reason for this?
More info about my version:
Baseband: 21.529.00.00.000
Kernel: 3.0.8-01317-gcd83a45 [email protected] #1
Build Number: 7D-501uV100R001C233B013
gregou said:
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address :
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
Click to expand...
Click to collapse
Thanks for the awesome tutorial bro
I've managed to root the phone, installed es files explorer. Double checked with root checker and confirmed root
But I'm stuck with renaming the file...
And the folder have a slightly different name but that is the only folder I've got..
/cust/channel/charm_china_l/xml/ (yours is china_u)
So, everytime I rename the file it keeps on giving error task failed. I've checked in properties and it says readable:yes writable:yes
I can't delete the file as well the error says unstall_apk.xml cannot be deleted
can u help please
thanks in advance :good:
sordanny said:
Thanks for the awesome tutorial bro
I've managed to root the phone, installed es files explorer. Double checked with root checker and confirmed root
But I'm stuck with renaming the file...
And the folder have a slightly different name but that is the only folder I've got..
/cust/channel/charm_china_l/xml/ (yours is china_u)
So, everytime I rename the file it keeps on giving error task failed. I've checked in properties and it says readable:yes writable:yes
I can't delete the file as well the error says unstall_apk.xml cannot be deleted
can u help please
thanks in advance :good:
Click to expand...
Click to collapse
OK I managed to figure out the solution
Used Root File Manager to rename and voila!! Renamed the file, restart device and got all the Google stuff setup on the phone
Now there is this second problem which is a big pain in the arse
I can't add a second Google account on the phone to get all my contacts..........
Under settings -> accounts -> add account -- there is no option to select "Google" !!!!
Have anyone also face this problem and is there any solution??
Thanks in advance for the help
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. Click on the big Google banner at the top of the page. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
ralphrmartin said:
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
Click to expand...
Click to collapse
I can confirm this is true. I did a search for "gms" rather than Google - tap on the big link you get at the top of the results page, which takes you to a page of all the Google apps and services, and install everything! (You can always uninstall what you don't need later). No root required, and everything is syncing properly - calendar, contacts, tasks etc. Super easy.
ralphrmartin said:
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. Click on the big Google banner at the top of the page. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
Click to expand...
Click to collapse
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
DannyBoy said:
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
Click to expand...
Click to collapse
Have you got Google Contacts Sync in your list of downloaded apps?
DannyBoy said:
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
Click to expand...
Click to collapse
Danny here's how to fix it, and u don't need root
if u have rooted and edited the unstall_apk.xml, best is download and flash the stock ROM first:
http://consumer.huawei.com/cn/support/downloads/detail/index.htm?id=20241 (click 立即下载 on the right)
u can also ignore it but all preinstalled google apps will become system apps, and if u've deleted some huawei bloatware u might not be able to OTA update latest B006 firmware
All the Google stuff can work perfectly even can add multiple Google accounts. Best thing is, u don't need root. Here's how:
1) Go to app centre - all - brand and look for the one with 谷歌 (sorry I've updated app centre and it might be different if u haven't update)
2) Download 联系人同步服务, 日历同步服务, Google Playstore, Gmail and Google plus. The rest can be downloaded from playstore
3) After install, open either playstore or gmail and sign in
At this stage, Google is already setup properly with contacts sync just it cannot add multiple Google accounts. Workaround:
4) Open Google plus. Settings - add account
And voila. The phone is perfect now
There's also an OTA update for the LTE version which updates your phone firmware to 7D-503LV100R001C233B006
Cool new features includes double tap screen on, some control over notification flash light for messages and background battery optimization :good:
[Update Aug.15.2014]
Huawei release a full stock Kitkat Update ROM...the one that is avaialbe OTA . Download from links in original post
501U R002 B010
503L R002 B010
[Update July.31.2014]
Huawei release a update to the JellyBean based ROM, the full ROM can be downloaded via links below in the original post for the corresponding models. Since it's based on the original JB ROM, dpi is 320 instead of 400 in the KitKat rom.
501U R001 B019
503L R001 B007
[Original]
Been following the Chinese forums and using google translate to read them....B007 firmware KitKat 4.4.2 with EMUI 2.3 has just been released today, July 10th, 2014. Link and instructions are listed below.
~~Caution: Update will wipe out user data, backup all data & apps before updating~~
~~Note: If you don't like B007 new 400dpi size, you can downgrade back to B006 by following the same directions with the B006 ROM file
~~Download
7d-501u
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=48
7d-503L
http://www.emui.com/plugin.php?id=hwdownload&mod=detail&mid=64
~~Note/Changelog
1 The upgrade package for the card brush (external SD card or X1 itself storage are possible);
2 Upgrade lose data (such as text messages, contacts, installed applications APK , etc.), data backup before the upgrade is strongly recommended , data can be backed up through the "cloud applications" in the "backup" software.
3 first upgrade process, please try not to touch the screen , the new version will be a touch screen calibration, if there is abnormal, then the screen will automatically repair if hand contact will affect the accuracy of the calibration or not calibrated .
Update Description:
The main new features :
1 new magazine lock screen (not support online update)
2 new super power saving mode
3 new online font
4 new Bluetooth MAP
5 new camera watermark function
The main system optimization :
1.An optimization of available memory, increasing 200M
2.under a variety of scenarios to optimize the photographic effect
3.optimize font display, micro-channel applications such as larger font
4.optimize ease of e-mail
5 touch screen experience optimized to increase the repair function automatically detects
6 optimize WiFi firmware, more stable long-term use
7 fixes 3G call quality problem under weak signal
8 TD repair mobile network from 3G to 2G handover probability of failures
9 When the noise floor Bluetooth phone repair problems
~~Instructions (Google translated)
1.1 SD card directory structure upgrade package
to upgrade the SD card directory structure:
| - dload (directory)
| - update.app (SD card upgrade package, Required)
| - onfg.cfg ( Required)
| -. auto_upgrade cfg (file)
1.2 Upgrade Process
1.2.1 Note
1) SD card before you upgrade, back up your user data.
2) When you upgrade to ensure that power more than 30%, or plug in an external power supply.
3) Please ensure that the SD card has enough memory space (> 2G) to prepare copies of the upgrade package, and ensure that the SD card file format is FAT32 (test method: SD card can be inserted into the card reader, then connect to the PC this when my computer on the PC will be a removable disk drive. Right select the disk, left click on the pop-up menu "Properties" to see the disk file system should be FAT or FAT32. NTFS format if it is, then the cards can not be used to upgrade).
4) Before the upgrade is complete or upgrade an exception, do not remove the SD card or the power, do not press the POWER button.
5) upgrade process if power interruption occurs, try again with the SD card upgrade.
1.2.2 SD card automatically upgrade
1) Make sure dload folder (contains update.app, onfg.cfg) and auto_upgrade.cfg complete copy of the file to the root directory of the SD card 5.2) Insert the SD card into the veneer
3) The SD card is inserted into the glory X1
4) glory X1 boot automatically into SD card upgrade (if the machine is turned on, then you restart the machine)
5) When the machine with a screen, the normal upgrade process, the screen displays the following figure
6) After a successful upgrade The screen displays as shown below, and then the machine will automatically restart 7) to confirm whether the version upgrade was successful: go to "Settings" - "About tablet" - "version number" in the query the current version number to confirm that the upgrade was successful. 8) When the machine with a screen, the upgrade fails, the screen displays the following diagram: If the upgrade fails, make sure that a copy of the upgrade package is complete, the storage path is correct, but in the SD card root directory will generate log file upgrades. With this log file, you can upgrade the reason for the failure to locate.
[Source http://cn.club.vmall.com/thread-573091-1-1.html]
Just finished updating....and WOW!!!!
Vast improvement....EMUI 2.3 is polished, quick and very responsive (but probably used Nova)
Everything is faster ...probably due to KitKat 4.4.2.
One MAJOR issue is that Huawei change the DPI...the icons and text will be larger. This change was in response to Huawei's forum users saying text was too small.
Update: Unable to root via current RootGenius 1.8.7en, 1.9.6, KingoRoot 1.2.2, AnzhiRoot 1.5.0
I lost play store after update .... but i just download the apk and install .. it works fine ... thanks
Just installed and the font is too big for me. The performance is better.
Antutu Score : 23637
Can not install some of application like FIFA 14. They said it is not compatible with the device.
I had to install Google+ for second Google account but it also has compatibility issue.
But you can add second Google account on YouTube app.
I've just received the Mediapad X1, 501u firm.
To install the Kitkat 4.4.2, should I root the unit first?
Thanks in advance!
No, you don't have to rooting. Just follow the instruction.
Sent from my X1 7.0 using XDA Free mobile app
wowcode said:
No, you don't have to rooting. Just follow the instruction.
Sent from my X1 7.0 using XDA Free mobile app
Click to expand...
Click to collapse
Upgraded to KitKet 4.4!
Thank you a lot!
wowcode said:
Just installed and the font is too big for me. The performance is better.
Antutu Score : 23637
Can not install some of application like FIFA 14. They said it is not compatible with the device.
I had to install Google+ for second Google account but it also has compatibility issue.
But you can add second Google account on YouTube app.
Click to expand...
Click to collapse
I have some apps that also show up as "incompatible with your version"...it's due to the change in LCD density value from 320 to 400. Hopefully someone finds a work around for this .
7D-501L
Can you update 7D-501L with 7D-501U? Did anyone tried it yet? Please let me know because I would love to upgrade my phone.
whoaw , DL speed is impressive , about ....0bps .... lol
if anyone had DL rom before and can post it on Mega , it will be great ( i need rom for 503L )
for who's tested, can you restore all googles app , by rooting/modify the xml file ?
upgrade by OTA will not work ? ( like from B002 to B006 ) ?
did the B007 will now accept 64G micro SD in ExtFAT ( fat64 ) ?
Dead-Eye said:
Can you update 7D-501L with 7D-501U? Did anyone tried it yet? Please let me know because I would love to upgrade my phone.
Click to expand...
Click to collapse
Not sure if anyone tried yet...
Z e k said:
whoaw , DL speed is impressive , about ....0bps .... lol
if anyone had DL rom before and can post it on Mega , it will be great ( i need rom for 503L )
for who's tested, can you restore all googles app , by rooting/modify the xml file ?
upgrade by OTA will not work ? ( like from B002 to B006 ) ?
did the B007 will now accept 64G micro SD in ExtFAT ( fat64 ) ?
Click to expand...
Click to collapse
needrom.com has a post for the B007 503L, I haven't registered, so not sure whether its a link to EMUI or a mirror
http://www.needrom.com/mobile/x1-7d-503l/
I tried rooting with RootGenius, but it failed...I was debating weather to use one of the "banned" rooting programs due to security concerns. In the end, I tried it anyways without success. No Root = no modify XML. You can still get Google Play via the Huawei App Center, search for "GMS" and click on the google banner and download google play store, then download apps from official play store . While you are at the Huawei app center, you also need to download both "Google Sync" programs, (1) with calender icon and (1) with contact icon to be able to sync.
To add multiple Google accounts to the X1, you need to download Youtube or Google Maps and add an account through those apps, there is no option to add accounts in settings.
OTA will not update fom B002 or B006 if you are root (from what I read)
Regarding 64GB SD card: B007 will not do NTFS or exFAT...BUT it will automatically format your card to FAT32 (which is a plus) Available storage 64GB card = 59.46GB. I have a 64gb Micro SDHX card, not SDHC...I could not get it to work on B006 even with FAT32.
thank's for your response.
the rom download on needrom is fast ( about 1 minute for the 998mo , lol )
it is not a good news for not to be abble to root the device , i use ESroot explorer many time ( to transfer file directly from my device to my servers ) , titanium backup for ... backup my data and remove ugly apk ( or chinese that i cant use ) and airdroid to control my phone by my mac ( even i forget it at home , lol )
did you try Anzhiroot for root B007 ? ( root genius will not work on my B006 4G mediapad, and anzhiroot yes , i hope that perhaps it will work in B007 )
for the 64GB card, on the B006 , it can be formated in FAT32 only, but it is very slow ( i know that fat64 is more fatest than fat32 )
i use a samsung SDHC class10 , and it is very slowly than my old samsung 32Gb class8 ....
Just upgraded to 4.4 Kitkat, but I can't install TASKER ("your unit is not compatibel with this version")
Anyone has successfully installed Tssker?
7D-501L Upgrade
OP - Thanks for the reply...
I guess I just need some courage and go for it...On the NeedRom website is showing this:
ROM Huawei 7D-501L – ROM Android 4.2.2
Update Official ROM Huawei 7D-501L Unicom version: 7D-501u_EMUI_2.3_V100R002C233B007
It looks harmless enough...I will post if everything went okay or not...*** Wish me luck ***
Since updated my internet connection keeps switching to 2G very often and there is no option to use 3G only. Is there any hidden menu i can use to put 3G only?
Thank you
Z e k said:
did you try Anzhiroot for root B007 ? ( root genius will not work on my B006 4G mediapad, and anzhiroot yes , i hope that perhaps it will work in B007 )
Click to expand...
Click to collapse
Seems like anzhiroot is an older version of rootgenius...tried it...also failed
Dead-Eye said:
OP - Thanks for the reply...
I guess I just need some courage and go for it...On the NeedRom website is showing this:
ROM Huawei 7D-501L – ROM Android 4.2.2
Update Official ROM Huawei 7D-501L Unicom version: 7D-501u_EMUI_2.3_V100R002C233B007
It looks harmless enough...I will post if everything went okay or not...*** Wish me luck ***
Click to expand...
Click to collapse
Let us know how it goes...maybe all units have the same hardware..but software profile activate different bands.
thyk888358 said:
Since updated my internet connection keeps switching to 2G very often and there is no option to use 3G only. Is there any hidden menu i can use to put 3G only?
Thank you
Click to expand...
Click to collapse
With 3g preferred...if 3g signal is strong it will use 3g...else it will drip down to 2g. If it was 3g only and 3g signal is weak...you will get no internet at all. Not sure if they changed the modem/baseband files...didnt pay attention to B006.. That may be why ...
7D-501L Failed...
Well the upgrade has failed. Trying to upgrade 7d-501l to 7d-501u. As it was going through the upgrade checks, it was saying successful but around 40%-50% I got this error:
"FAIL" = Detected the upgrade package can not be adapted to your tablet...
Any suggestion??
MODEL: Mediapad X1 (International Version) 7D-501LV100R001C199B003
acuratlsfan said:
Seems like anzhiroot is an older version of rootgenius...tried it...also failed
Let us know how it goes...maybe all units have the same hardware..but software profile activate different bands.
With 3g preferred...if 3g signal is strong it will use 3g...else it will drip down to 2g. If it was 3g only and 3g signal is weak...you will get no internet at all. Not sure if they changed the modem/baseband files...didnt pay attention to B006.. That may be why ...
Click to expand...
Click to collapse
Thank you .. i think the new baseband is not good at my country ... too bad i can't go back to my previous 4.2.2 ..
Dead-Eye said:
Well the upgrade has failed. Trying to upgrade 7d-501l to 7d-501u. As it was going through the upgrade checks, it was saying successful but around 40%-50% I got this error:
"FAIL" = Detected the upgrade package can not be adapted to your tablet...
Any suggestion??
MODEL: Mediapad X1 (International Version) 7D-501LV100R001C199B003
Click to expand...
Click to collapse
At this point ... You should probabky wait for an official 501L ROM . I'm assuming it shouldn't be long ...beats having a $400 brick.
B007 is faster ... But the big font is annoying pretty much everyone. I can barely type correctly...the keyboard is literally half the screen !
acuratlsfan said:
At this point ... You should probabky wait for an official 501L ROM . I'm assuming it shouldn't be long ...beats having a $400 brick.
B007 is faster ... But the big font is annoying pretty much everyone. I can barely type correctly...the keyboard is literally half the screen !
Click to expand...
Click to collapse
OP - Thanks.
Yes you're right don't want to have a $400 brick on my desk. Just need to wait a little longer for an release. I hope soon and also hope they make the fonts smaller. Don't want a keyboard taking up half my screen...
This small guide was succesfull for me. Hope this will help you guys!
For L09C432B360
1. Install Firmware Finder
2. Enter in Firmware Finder Settings and select Install via system update.
3. You'll get prompt to Download FF Proxy, select Download Addon.
4. Install FF Proxy and dont run
5. Go back to FF and select GET FIRMWARE LIST
6. Select VIE-L09C432B360 Size: 1.334
7. Select SEND FIRMWARE TO UPDATER
8. FF Proxy now will start
9. Go to Wireless and set proxy to: localhost with 8080 port
10. Go to system settings and chose Updater
11. You'll get VIE-L09C432B360 available -> DONT CLICK TO UPDATE/DOWNLOAD
12. Go to wireless settings and disable proxy ( set it to none)
13. Go back to updater and chose Download latest full package
14. Update and VOILA!
GOOD LUCK
That is exactly what I did few days ago and work just fine for me. Now am on android N and Emiui 5
The same, upgrade successfull now, I discover this new EMUI
zubyro said:
This small guide was succesfull for me. Hope this will help you guys!
For L09C432B360
1. Install Firmware Finder
2. Enter in Firmware Finder Settings and select Install via system update.
3. You'll get prompt to Download FF Proxy, select Download Addon.
4. Install FF Proxy and dont run
5. Go back to FF and select GET FIRMWARE LIST
6. Select VIE-L09C432B360 Size: 1.334
7. Select SEND FIRMWARE TO UPDATER
8. FF Proxy now will start
9. Go to Wireless and set proxy to: localhost with 8080 port
10. Go to system settings and chose Updater
11. You'll get VIE-L09C432B360 available -> DONT CLICK TO UPDATE/DOWNLOAD
12. Go to wireless settings and disable proxy ( set it to none)
13. Go back to updater and chose Download latest full package
14. Update and VOILA!
GOOD LUCK
Click to expand...
Click to collapse
Where wireless ?Your mean WiFi?
Step 4.5 switch on again Install via System Update, my went to off again after I installed the FF Proxy program in step 4
regards mb
Hey ! I got an issue...
During the update in "Updater" app, when its on 74%, Updater close the process and restart from 60%, i wait 74%.. the same. It's a loop.
What can i do ? Sorry for my bad english, and thank you!
EDIT: ok problem solved, i used the proxy during the download and it worked. My emui5 works but i have not Huawei ID app, theme store doesn't work and if i reboot i got an error "You device has failed verification code and may work not properly". What can i do? Thanks a lot for your support !
[SOLVED: installed b181 rollback and retry with CORRECT INSTRUCTION via firmware finder]
Same thing.. totally unhappy. Read my previous comment about camera. The aperture mode is not working properly anymore. Some other things, too.. battery just draining on my.. almost as worse as iPhone. I don't see any advantages.. does anyone?
I find everything unclear. Specially the drop down push messages.. Will def. Roll back
Mine simply won´t update. Fails on 5% on update. Tried to reset the phone. Download eRecovery. It wont do nothing.. Everything fails.
Do i need to unlock the Bootloader?
Same problem...74% loop&restart from 61%.....How we can solve this problem?
Just wanted to say cheers for the guide. Managed to update my vodafone uk branded to 7. Make sure when your searching for your new firmware that you do it on your 4g not wifi. Then switch to your wifi to download
Hmmmm. Updated my O2 P9+ fine to C40B330, all looking good - although the battery drain seems high, been hitting my 20% notification two days in a row and never normally see it.
Anyway, went to use Android Pay and I get an error that it can't be used as it can't verify my version of Android. Tried uninstalling and reinstalling. cleared cache, cleared data.
I'm not rooted, didn't unlock the bootloader, just followed the instructions above. Any ideas? Had a search of the forum, there's lots of tips for Oneplus owners but nothing much for Huawei.
Just checked and B332 has been released... I'll flash that and see if it's any better at either battery life or Android Pay!
Trouble is, now I've sampled Nougat I can't go back to MM So I looked at my upgrade options.... I can pay off my P9+ and get a P10 for £60 and an extra £5 a month.... Hmm......
Hello,
I'm with VIE-L09 and i'm already on C432B320 but i want to re-flash so this method don't work anymore, how to re-flash safe without root?
Found b370 in FF (now i have b360) for c432 and tried to send via Ff proxy
Ota version (224mb on FF...640 mb on Huawei updater )
System reboot but Ask only for reboot / wipe
Tried also full update but no luck
Yes, tried dload/recovery method too, didn't work just says "update package doesn't exist" ...
---------- Post added at 07:55 AM ---------- Previous post was at 07:24 AM ----------
I managed to install it via servicemenu, *#*#2846579#*#* , what I did wrong before is I extracted the update into dload which resulted in a subfolder called update. I moved the contents of "update" to directly under dload and the update worked. I got new kernel and new security patch, but it still displays B360. Strange. Seems to work well though.
Edit. I used the "full" package from 170321 in FF.
xeizo said:
Yes, tried dload/recovery method too, didn't work just says "update package doesn't exist" ...
---------- Post added at 07:55 AM ---------- Previous post was at 07:24 AM ----------
I managed to install it via servicemenu, *#*#2846579#*#* , what I did wrong before is I extracted the update into dload which resulted in a subfolder called update. I moved the contents of "update" to directly under dload and the update worked. I got new kernel and new security patch, but it still displays B360. Strange. Seems to work well though.
Edit. I used the "full" package from 170321 in FF.
Click to expand...
Click to collapse
Download also the hw specsea package so that you would go to b370
I did already download and extract update_data_full_hw_eu.zip and put in the same dload folder but obviously it didn't work. So where do I put those files? Or is there yet another package I need?
---------- Post added at 10:39 AM ---------- Previous post was at 10:14 AM ----------
xeizo said:
I did already download and extract update_data_full_hw_eu.zip and put in the same dload folder but obviously it didn't work. So where do I put those files? Or is there yet another package I need?
Click to expand...
Click to collapse
I answer myself, I overwrote the update-content in the dload folder with the update_data_... content and installed again. Now it's B370. Looks like it's a two stage process, rather clumsy, any way to install everything in just one large swoop?
xeizo said:
I did already download and extract update_data_full_hw_eu.zip and put in the same dload folder but obviously it didn't work. So where do I put those files? Or is there yet another package I need?
---------- Post added at 10:39 AM ---------- Previous post was at 10:14 AM ----------
I answer myself, I overwrote the update-content in the dload folder with the update_data_... content and installed again. Now it's B370. Looks like it's a two stage process, rather clumsy, any way to install everything in just one large swoop?
Click to expand...
Click to collapse
Yes its two step process because the cust is in the second update package..
xeizo said:
I did already download and extract update_data_full_hw_eu.zip and put in the same dload folder but obviously it didn't work. So where do I put those files? Or is there yet another package I need?
---------- Post added at 10:39 AM ---------- Previous post was at 10:14 AM ----------
I answer myself, I overwrote the update-content in the dload folder with the update_data_... content and installed again. Now it's B370. Looks like it's a two stage process, rather clumsy, any way to install everything in just one large swoop?
Click to expand...
Click to collapse
I tried to install the update.app file extracted from update_full_hw_eu.zip in my external sdcard with the dload folder method, but when I reboot the phone, I get an error that stops the upgrade process immediately, at 5%....
Someone could post a direct link to the right update_full_hw_eu.zip file ?
Thanks for the attention
use b370 21.03 firmware and also his update_full_hw_eu.zip file (NOT 13.04 version)
(usa la versione del 21.03 e il suo update_full
Prima installi l'update 21.03 poi dopo il file update, sempre via dload)
I see lots of discussion on rooting, unlocking bootloader, etc. But I am wondering if there is guide describing how to enable volte for tmobile? That is all I am looking for and I am really not savy/technical when it comes to phones. I have the dual SIM 850 emw and I really dont want to lose use of the phone when tmobile dumps 3g next month. Thank you
Found this. Sort of cryptic.
I used the dailer code on my Samsung to verify VoLTE was enabled, otherwise it doesn't show the setting or that it's even HD.
Apparently AT&T supports this device if your carrier drops the ball. Verify this though...
armodons said:
Thanks for pointing me in the right direction! I now have VoLTE and Wifi Calling working on my LMG820QM (on T-mobile).
I have the BPT variant of the LMG820QM, for which VoLTE and Wifi Calling does not work. After bootloader unlocking and rooting, I tried the above VolteFix-v1 but wanted Wifi Calling. Forcing the option to appear via a profile in Universal Enabler in the hidden menu* did not work and instead caused LG IMS to continuously crash.
*For those interested in the hidden menu, first create an empty folder named "enable_ue" in internal storage. Then go to the dialer and type *#546368#*820#. In Field Test > Universal Enabler you can "Create New Config" and manually enable VoLTE, ViLTE, VoWIFI, and ViWIFI. However, even though these options became enabled in *#*#4636#*#* they didn't seem to actually work.
Next, I tried to crossflash partitions from the US Open kdz but was unable to due to a size mismatch of the OP partition (among other problems).
Finally, since I had already extracted the OP partition from the US Open kdz (G820QM20f_00_NAO_US_OP_0402.kdz), I extracted files that looked relevant and copied them over using a root browser into /product/OP. After setting permissions and restarting, I now have working VoLTE and Wifi Calling!
The files are cust.prop [update: apparently not needed; my existing one worked just fine], all the files in config, and a few folders in priv-app [update: these are the apps for Wifi Calling!] not present in my phone's kdz (not sure which ones if any of these apks are actually needed but since it works I'm not going to experiment more). See attached for details.
Note: Since these files are from the US Open kdz, it will likely only work for US carriers. But the process can be repeated for other regions with the right kdz.
UPDATE: Replaced the attachment, had the wrong files in Config.
** Noticed that upon factory resetting the wrong default APNs are inserted. Had to factory reset on original files, have APNs setup correctly, then copy the attached files (did not copy over cust.prop this time and still worked).
Click to expand...
Click to collapse
Hello jdapp,
I was able to get VoLTE AND VoWIFI on Mint (T-mobile) with these instructions. I also posted what I did on Post 50. The files work for firmware 20 but if you need the ones for firmware 30 let me know.
Awesome thanks. Yes if I could get the firmware 30 files that would be great.
dahveedsolorzano said:
Hello jdapp,
I was able to get VoLTE AND VoWIFI on Mint (T-mobile) with these instructions. I also posted what I did on Post 50. The files work for firmware 20 but if you need the ones for firmware 30 let me know.
Click to expand...
Click to collapse
jdapp said:
Awesome thanks. Yes if I could get the firmware 30 files that would be great.
Click to expand...
Click to collapse
No problem, let me know how it goes.
So I have tried to do the bootloader unlock and flash but every time I get a Download fail: Sahara Fail: Q SaharaServer Fail: Process fail?
Any thoughts?