{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.3.1 & Root for Motorola One Zoom
© Attention! Creation of mirrors for downloading, distribution on other resources without coordination with the authors banned! ©
Fixed problem of not working touch!
Thanks to the efforts of mauronofrio , yuri-2016 and and my humble contribution, the TWRP 3.3.1 was made from scratch and a new method of Root was tested.
This is a universal method that will fit all modifications of Motorola One Zoom.
READ OBLIGATORY !!!
Warning! You are responsible for your own actions with the phone.
100% guaranteed operation of this method is tested on clean firmware installed in standard way via fastboot (system in Slot A).
The phone should have USB debugging enabled and bootloader unlocked!
All your user data will be deleted during TWRP installation process!
Instructions
1. Download the following files:
- Download current version of twrp-3.3.1-6-parker-mauronofrio.img (copy to C:\adb\ folder) and archive twrp-3.3.1-6-parker-installer-mauronofrio.zip (copy to external SD Card) ;
- archive for Magisk installation (copy to external SD Card) https://github.com/topjohnwu/Magisk (latest version for today Magisk v20.4);
- archive to disable dm-verity and forceencrypt Disable_Dm-Verity_ForceEncrypt (copy to external SD Card) https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389 (latest version for today Disable_Dm-Verity_ForceEncrypt_03.04.2020 https://zackptg5.com/downloads/Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip );
2. Boot the phone in fastboot mode, connect it to a PC and perform the following commands:
Code:
fastboot boot C:\adb\twrp-3.3.1-6-parker-mauronofrio.img
3. After rebooting in the TWRP give permission by doing Swipe to Allow Modifications.
4. Go to the "Install" section. Click on "Select Storage" button, select Micro SD card, OK. Choose twrp-3.3.1-6-parker-installer-mauronofrio.zip and "Swipe to confirm Flash".
5. Go to "Wipe" section and press "Format data" for decryption. Type "Yes" on request. Go to the TWRP Main Menu and reboot again in the Recovery. Give permission by doing Swipe to Allow Modifications.
6. Go to the "Install" section. Click on "Select Storage" button, select Micro SD card, OK. Choose and install sequentially: archive for installation Magisk, archive Disable_Dm-Verity_ForceEncrypt.
7. Reboot into the System.
8. Fully go through the initial settings, enable Developer Mode and USB debugging.
9. Reboot into the bootloader and again in TWRP.
10. Make settings TWRP - adjust time, a time zone, brightness of the display, language.
11. Reboot into the system.
Congratulation! Your device now has a TWRP and Root!
Attention, it's important! If you have problems with a broken WiFi and mobile network after install TWRP, install directly in TWRP boot.img the same stock firmware version that is currently installed on phone and then install TWRP-installer.
great job!!!
It's great to see some development in our forums! Great job
domi.nos said:
It's great to see some development in our forums! Great job
Click to expand...
Click to collapse
All work was done on the phone purchased in Poland :highfive:
Now, thanks to talented people, we're working on fixing the problem with the touch.
Added absolutely new TWRP, fixed problem of not working touch, redesigned installation manual. Enjoy!
thank you for your support, you're brilliant!!!
after doing the whole process, the cell phone does not work the wifi or the mobile network
spcarlos2 said:
after doing the whole process, the cell phone does not work the wifi or the mobile network
Click to expand...
Click to collapse
Phone for which region? What kind of firmware is it installed? Have you booted TWRP or flashed it?
ilia3367 said:
Phone for which region? What kind of firmware is it installed? Have you booted TWRP or flashed it?
Click to expand...
Click to collapse
Colombia
Modelo XT2010-1
Hardware pvt
I did as it appears in the instructions
Hi, I tried but when I perform the command don't let me continue, it says "the archive don't exist" something like that, I need help please...
spcarlos2 said:
Colombia
Modelo XT2010-1
Hardware pvt
I did as it appears in the instructions
Click to expand...
Click to collapse
did you got it to work again? I got the exact same problem
Just bought a US version XT2010-1. Stock ROM Android 9 with newest security updates (just downloaded all of them). Build PPHS29.59-49-8. I unlocked the bootloader already
Can anyone confirm this process works and all phone functions will work (cell and WiFi) if I follow all the instructions as written?
To clarify, this is a brand new phone with stock firmware. The only changes I made were updating security patches and unlocking the bootloader. Haven't even set up Google account on phone yet.
Thanks
jacky1241 said:
did you got it to work again? I got the exact same problem
Click to expand...
Click to collapse
Did you get your phone to work with this method? I have a brand new phone want to root it but don't want to F it up.
If you have problems with WiFi and mobile network after downloading to TWRP, install boot.img of stock firmware and then install TWRP-installer.
But there shouldn't actually be any such problems.
TWRP should fit all models.
TWRP isn't installed, it's loaded.
ilia3367 said:
If you have problems with WiFi and mobile network after downloading to TWRP, install boot.img of stock firmware and then install TWRP-installer.
But there shouldn't actually be any such problems.
TWRP should fit all models.
TWRP isn't installed, it's loaded.
Click to expand...
Click to collapse
Thanks. I'm going to give it a shot.
Sort of a noob. I've rooted 2 phones before but used a pre-made script on one and used TWRP on my Moto G4 with a custom ROM.
Where do I get stock boot.img if I need i?. I saw multiple posts on different forums about "extract the boot.img" but I don't know where to extract it from. Sorry to bother you. Thanks for your work on this.
FL-Guy said:
Where do I get stock boot.img if I need i?.
Click to expand...
Click to collapse
From the archive of the stock firmware. The same firmware version that is currently installed on your phone.
Worked!
Followed all the instructions as written and BAM! I have TWRP recovery and rooted phone.
You da man. Thanks!!!
Finally the TWRP website has an official Recovery Page for Motorola One Zoom! https://twrp.me/motorola/motorolaonezoom.html
Hopefully soon we will see TWRP itself.
There is an official TWRP !!!
Related
Hi everyone trying to install a new ROM (cm12 hopefully) to my phone, the phones boot loader in unlocked ive installed TWRP 2.8.5.0 every time i select the 2 rom and gapps zip files for flashing i get error message saying failed and back to the main menu.
Please can anybody help its driving me mad.
David Thompson.
dave0147 said:
Hi everyone trying to install a new ROM (cm12 hopefully) to my phone, the phones boot loader in unlocked ive installed TWRP 2.8.5.0 every time i select the 2 rom and gapps zip files for flashing i get error message saying failed and back to the main menu.
Please can anybody help its driving me mad.
David Thompson.
Click to expand...
Click to collapse
use cm-12.1 make sure you full wipe everything (except data/media you can still format data without nuking the internal sd partition)
Make sure you select the rom FIRST then gapps, also please for the love of jesus remember to flash the boot.img once you've finished flashing the rom + gapps.
If that still fails, give me the recovery.log file.
Getting knowhere just getting FAILED message in red as per your instructions ...
it fails after the rom and g apps install i dont even get to the boot.img
dave0147 said:
Getting knowhere just getting FAILED message in red as per your instructions ...
it fails after the rom and g apps install i dont even get to the boot.img
Click to expand...
Click to collapse
Per my instructions I also said get the recovery.log for me
go to ADVANCED > COPY LOG TO SD
once you have gotten the "fail" message.
then pull it off and upload it for me.
Recovery file see attached.
dave0147 said:
Recovery file see attached.
Click to expand...
Click to collapse
I see the problem, easy fix mate.
script aborted: This package is for device: endeavoru; this device is enrc2b.
Download the ENRC2B One which is the ONE X+ not the ONE X version
https://www.androidfilehost.com/?w=files&flid=28732
The latest one is at the bottom. I also suggest you read this : http://forum.xda-developers.com/htc-one-x2/help/wifi-data-cm-roms-read-posting-t3158955
Done as you stated above but my phone is now stuck on the CM12 loading screen the animation is running but it just stays this way (left the phone for over an hour and no change).
dave0147 said:
Done as you stated above but my phone is now stuck on the CM12 loading screen the animation is running but it just stays this way (left the phone for over an hour and no change).
Click to expand...
Click to collapse
Did you flash the bootimage?
Hi Lloir,
Not sure if i did this in the right order
1. added cm12 rom zip
2. added gapps file
3. swipped and installed the two files above no error message.
4. this is where it may have gone wrong i extracted theBOOT.ing file from the CM12.zip file and added that to TWRP recovery and installed.
5. Re Booted the phone and thats where it does nothing but run the animation.
David.
dave0147 said:
Hi Lloir,
Not sure if i did this in the right order
1. added cm12 rom zip
2. added gapps file
3. swipped and installed the two files above no error message.
4. this is where it may have gone wrong i extracted theBOOT.ing file from the CM12.zip file and added that to TWRP recovery and installed.
5. Re Booted the phone and thats where it does nothing but run the animation.
David.
Click to expand...
Click to collapse
You didn't read the link I gave you. Click the Here in my signature, and follow them step by step.
dave0147 said:
Hi Lloir,
Not sure if i did this in the right order
1. added cm12 rom zip
2. added gapps file
3. swipped and installed the two files above no error message.
4. this is where it may have gone wrong i extracted theBOOT.ing file from the CM12.zip file and added that to TWRP recovery and installed.
5. Re Booted the phone and thats where it does nothing but run the animation.
David.
Click to expand...
Click to collapse
The boot.img isn't supposed to be installed within TWRP. You have to manually flash it through fastboot
Holy crap GRRRRR
done what you said followed your instructions and flashed the boot.img from your link re started the phone and now im getting the white HTC quietly brilliant boot screen then nothing happens.
thanks for your help so far.
David
dave0147 said:
Holy crap GRRRRR
done what you said followed your instructions and flashed the boot.img from your link re started the phone and now im getting the white HTC quietly brilliant boot screen then nothing happens.
thanks for your help so far.
David
Click to expand...
Click to collapse
Ok lets go through this in easy steps.
0) open the ROM ZIP with winrar/7zip and pull out the boot.img
1) reboot into recovery and Wipe system/cache/data in recovery
2) Flash rom + gapps
3) make sure the phone is CONNECTED to the pc and assuming you read the instructions from the other post you have the android adb tools
4) reboot into fastboot it will show this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(random image off the internet)
5) open up the cmd on the pc and go cd to the folder where adb is, in that folder make sure the boot.img is in there and do the following :
fastboot flash boot boot.img
fastboot reboot
sorted.
I know the rom's all boot I test them before releasing.
All done thanks so much for the help one x plus is now update my accounts and apps.
is there a way of checking if theres new ROM updates for the phone?
thanks david thompson
dave0147 said:
All done thanks so much for the help one x plus is now update my accounts and apps.
is there a way of checking if theres new ROM updates for the phone?
thanks david thompson
Click to expand...
Click to collapse
Just check the forum dude. CM-12.1 is unofficial.
Glad your all sorted now, at least you learnt something from this
Can you help with this problem ... i can change my voice mail settings from 901 to 443 it say it wont change.
hello
I'm so confused.
Please help me how I'm going back to the stock (3.1.3) rom from Cm13 best way and safe.
Thank you
Download Oxygen OS 3.1.3 full ROM
Download MM based unofficial TWRP
Downloaded Modded SuperSU if you want root
You will require a PC with WinRAR & Notepad++, because as we are running custom ROMs the zipwill give an error 7 saying that The package is for OnePlus, this is an onyx, we need to remove that.
Don't worry, its super easy.
- Download the OOS3 zip, copy it to your PCs desktop
- Open it with winRAR, dont extract it, just open it
- There will be a META-INF folder, open it
- Then open com, then google, then android, there will be 2 files here, updater-binary & updater script
- Double click on updater-script
- It will ask which app to use to open the file, then select to open with Notepad++ (designate it from its installed directory if it isn't visible in the initial list)
- The file will look like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Delete the entire first line that starts with getprop
- Now it should look like this
- Now press Ctrl+S to save the file and close the window
- WinRAR will ask weather to update changes in the archive, say yes to that
- Let it finish its job
- Done !
Moving on the the flashing now...
Assuming you are using official TWRP with your CM13 now,
- Copy the modded OOS3 zip into your Device
- Boot into TWRP recovery
- Wipe system, data, cache & dalvik/art cache
- Flash the modified OOS3 zip
- Let it complete
- After it completes, press the wipe cache/dalvik button below
- Now reboot to system
- Complete the initial setup
- Goto settings, unlock developer options by tapping 7 times on build number in about phone
- Enable advanced reboot
- Then reboot to bootloader
- Flash the MM based unofficial TWRP via fastboot
- Remember to boot into this newly flash TWRP before booting into system so that it doesn't overwite it
- Done
Now you are on OOS 3.1.3, and have a working TWRP, you can proceed to flash SuperSU etc to gain root
thank you !
if I want to back to 2.2.1 and then Update ?
I not need ROOT / TWRP
meliko said:
if I want to back to 2.2.1 and then Update ?
I not need ROOT / TWRP
Click to expand...
Click to collapse
Actually, you want to update to 3.1.3, right ? Then you don't need to go back to OOS2 then again OOS3, the method i gave above will work as intended, its tried as tested by many users along with myself.
As for not requiring Root, just dont flash the SuperSU zip.
Keep the TWRP, its handy.
Also, press the thanks button on bottom left corner of my post, no necessary to say it in the reply.
I need to go back to stock rom for Exercise responsibility
thank you again
Hello,
I followed these instructions and It worked perfectly. (Note that I was coming from CM13)
Thanks a lot !
Thanks for the great description!
A question, just in case, I would go back again go to CM13 , can i then just import my old backup via the modified TWRP, or I have to note something again?
Thanks in advance!
Gustl6500 said:
Thanks for the great description!
A question, just in case, I would go back again go to CM13 , can i then just import my old backup via the modified TWRP, or I have to note something again?
Thanks in advance!
Click to expand...
Click to collapse
- Boot into recovery
- Wipe everything except SD Card
- Flash OOS2 zip
- Boot into it
- Goto settings, unlock dev options, enable advanced reboot
- Then reboot to bootloader
- Install official TWRP, Done
flash any rom you want now.
Both directons tested, go to original, go back to cm13, works perfectly!
Thank you for your help!!!
Gustl6500 said:
Both directons tested, go to original, go back to cm13, works perfectly!
Thank you for your help!!!
Click to expand...
Click to collapse
I'm glad.
Pass the info along.
But when i did the same process it again showing the error as"UPDATER PROCESS ENDED WITH ERROR:7
No one posted this here yet, so here it is.
The tools are from YouLinw233 on Weibo.
Download the tools:
https://mega.nz/#!yRQXFajL!1HLVZ6qOwVVyFXPmVvUHtkF_N3Tm_BgssbmW473uLuM
Download Magisk, Magisk Manager and Open GApps (ARM64, Android 8.1, I got an error when trying to flash the full package so get the stock one), install Magisk Manager and copy everything else on your phone.
Enable "OEM unlocking" and "USB debugging", connect the phone to your PC and run glass.bat, you should see a menu.
First press 1 to install the drivers, then press 2. The phone will reboot in fastboot mode and flash the recovery.
Now on your phone select "Reboot into recovery mode" with the volume buttons and press the power button to confirm.
TWRP should boot, from here you can flash Magisk and GApps.
If pressing 2 doesn't work try to unplug your phone, boot it in fastboot mode by pressing volume down while it turns on, connect it again and press 3 on the menu.
Another guide I found useful before this post:
https://www.chinahandys.net/en/nubia-z18-mini-install-google-playstore-not-reliable/
Nubia Z18 mini (NX611J) would deserve its own threat. The bootlocker is not locked (unlike many other Asian brands), and there is working TWRP 3.2.1 for it.
Updates are available:
http://ui.nubia.cn/rom/detail/52
It is a brilliant phone, with awesome camera. Installing google playstore, root are all easy and everything works well.
Nubia Z18 mini (NX611J) not unlocking. Any advice?
brenyoka said:
Another guide I found useful before this post:
https://www.chinahandys.net/en/nubia-z18-mini-install-google-playstore-not-reliable/
Nubia Z18 mini (NX611J) would deserve its own threat. The bootlocker is not locked (unlike many other Asian brands), and there is working TWRP 3.2.1 for it.
Updates are available:
http://ui.nubia.cn/rom/detail/52
It is a brilliant phone, with awesome camera. Installing google playstore, root are all easy and everything works well.
Click to expand...
Click to collapse
Hey guys,
I'm trying to unlock my nubia z18 mini (NX611J) but it just freezes every time.
The full description here: https://forum.xda-developers.com/general/general/nubia-z18-mini-nx611j-unlocking-please-t3849819
Ok so I found the Problem... I just had to reinstall the drivers from scratch one more time and then use the ./fastboot.exe from your download or this: https://www.androidbrick.com/download/nubia-z18-mini-nx611j-twrp-root/ and it finally worked
Fyde said:
No one posted this here yet, so here it is.
The tools are from YouLinw233 on Weibo.
Download the tools:
https://mega.nz/#!yRQXFajL!1HLVZ6qOwVVyFXPmVvUHtkF_N3Tm_BgssbmW473uLuM
Download Magisk, Magisk Manager and Open GApps (ARM64, Android 8.1, I got an error when trying to flash the full package so get the stock one), install Magisk Manager and copy everything else on your phone.
Enable "OEM unlocking" and "USB debugging", connect the phone to your PC and run glass.bat, you should see a menu.
First press 1 to install the drivers, then press 2. The phone will reboot in fastboot mode and flash the recovery.
Now on your phone select "Reboot into recovery mode" with the volume buttons and press the power button to confirm.
TWRP should boot, from here you can flash Magisk and GApps.
If pressing 2 doesn't work try to unplug your phone, boot it in fastboot mode by pressing volume down while it turns on, connect it again and press 3 on the menu.
Click to expand...
Click to collapse
Link of Mega ask for password to download tools, thanks for fix it.
diogoasisti said:
Link of Mega ask for password to download tools, thanks for fix it.
Click to expand...
Click to collapse
There's no password, maybe it's asking you for the Mega encryption key, but it's already in the URL, try to copy and paste it in the browser.
Hello, I try to unlock my Nubia Z18 mini for a long time, I will follow this guide and I hope that it works, thank you for sharing.
________________________________________________________________________________
https://downloader.vip/the-pirate-bay/ https://downloader.vip/yify-yts/ https://downloader.vip/rarbg/
This worked like a charm, thanks a bunch !
Official rom Z18 mini
Hi!
Can you confirm that these official roms from china have English language and work in Europe? Will Snapchat and so on work on this rom? I got a phone with preinstalled Gapps and Snapchat do not work and the rom is a bit slow. Maybe these updatet roms will work better? It is a nice phone but the firmware does a bad job.
Please any one can confirm is dual 4G works simultaneously? Please??
V 2.33 ROM, it can flashed with twrp and include English.
[email protected] said:
Hi!
Can you confirm that these official roms from china have English language and work in Europe? Will Snapchat and so on work on this rom? I got a phone with preinstalled Gapps and Snapchat do not work and the rom is a bit slow. Maybe these updatet roms will work better? It is a nice phone but the firmware does a bad job.
Click to expand...
Click to collapse
Reply :ROM V 2.33 it can flashed with twrp and include English.
Only I can't use gapps: on last stock fw v2.36 ?
Flashed TWRP recovery-TWRP-3.2.3-1009-NUBIA_Z18_MINI-CN-wzsx150.img
Flashed gapps open_gapps-arm64-8.1-pico-20190516.zip (or nano, doesn't matter).
When I running Google Play -> Sign In - infinite "Cheking info..." and circle loop:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pls try gapps 20190507 version.
Sent from my [device_name] using XDA-Developers Legacy app
Hello, recently software break my Xiaomi MI 9 SE, this because when triet to boot to recovery after flashing TWRP give this message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And when tried to reboot into recovery dosn't work, this post is because solved this problem took me almost two days so i'm trying to help someone needed
I upload all the files needed for restore your phone and install pixel clean room
Enter to this link: (Send me private to obtain, XDA doesn't let me post any link because i'm a new user... sorry for that)
Inside is necessary to download the file with name "MiFlash.zip", unzip the file and execute the MiFlash.exe
Reboot you phone in bootloader and connect to the pc
Download the file inside de google drive link, with name "grus_eea_global_images_V10.2.9.0.PFBEUXM" this is the factory system proporsionated by xioami, this case is the global flavor
Unzip the content, and in the "MiFlash" program configure the route to the folder previously unziped, with your phone connected proced to install run the program
In this moment, we have restore our phone with the stock room, not my ideal room but solve the principal problem
So, to go forward i install twrp (probed worked) and flash another room and rooting. It's not necesary follow this steps.
Reboot to bootloader the phone and connect to the pc
Download the file "recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img"
Enter inside the folder with the image dowloaded previously
Run the follow command "fastboot flash recovery recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img"
Run the command "fastboot boot recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img" or reboot and go to the recovery
With your phone connected, download the following files ("PixelExperience_Plus_grus-9.0-20190924-1959-OFFICIAL.zip", "Magisk-v20.0.zip" and "fw-vendor_grus_miui_GRUSGlobal_V10.3.4.0.PFBMIXM_1af3c0ea1e_9.0.zip"), copy this files inside the memory of your smartphone.
With TWRP, wipe everything except the internal storage of your phone
Go to flash and install "fw-vendor_grus_miui_GRUSGlobal_V10.3.4.0.PFBMIXM_1af3c0ea1e_9.0.zip"
Flash the following zip file "PixelExperience_Plus_grus-9.0-20190924-1959-OFFICIAL.zip"
Finnaly flash the "Magisk-v20.0.zip"
Reboot your phone and wait, the magic it's happened
Well, finnaly sorry for my bad english, hope this help someone, for me took me almost 2 days to repair my phone.
Bye
walberth said:
Hello, recently software break my Xiaomi MI 9 SE, this because when triet to boot to recovery after flashing TWRP give this message:
And when tried to reboot into recovery dosn't work, this post is because solved this problem took me almost two days so i'm trying to help someone needed
I upload all the files needed for restore your phone and install pixel clean room
Enter to this link: (Send me private to obtain, XDA doesn't let me post any link because i'm a new user... sorry for that)
Inside is necessary to download the file with name "MiFlash.zip", unzip the file and execute the MiFlash.exe
Reboot you phone in bootloader and connect to the pc
Download the file inside de google drive link, with name "grus_eea_global_images_V10.2.9.0.PFBEUXM" this is the factory system proporsionated by xioami, this case is the global flavor
Unzip the content, and in the "MiFlash" program configure the route to the folder previously unziped, with your phone connected proced to install run the program
In this moment, we have restore our phone with the stock room, not my ideal room but solve the principal problem
So, to go forward i install twrp (probed worked) and flash another room and rooting. It's not necesary follow this steps.
Reboot to bootloader the phone and connect to the pc
Download the file "recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img"
Enter inside the folder with the image dowloaded previously
Run the follow command "fastboot flash recovery recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img"
Run the command "fastboot boot recovery-TWRP-3.3.0-0421-XIAOMI9SE-CN-wzsx150.img" or reboot and go to the recovery
With your phone connected, download the following files ("PixelExperience_Plus_grus-9.0-20190924-1959-OFFICIAL.zip", "Magisk-v20.0.zip" and "fw-vendor_grus_miui_GRUSGlobal_V10.3.4.0.PFBMIXM_1af3c0ea1e_9.0.zip"), copy this files inside the memory of your smartphone.
With TWRP, wipe everything except the internal storage of your phone
Go to flash and install "fw-vendor_grus_miui_GRUSGlobal_V10.3.4.0.PFBMIXM_1af3c0ea1e_9.0.zip"
Flash the following zip file "PixelExperience_Plus_grus-9.0-20190924-1959-OFFICIAL.zip"
Finnaly flash the "Magisk-v20.0.zip"
Reboot your phone and wait, the magic it's happened
Well, finnaly sorry for my bad english, hope this help someone, for me took me almost 2 days to repair my phone.
Bye
Click to expand...
Click to collapse
can we use another rom instead of PixelExperience?
2 things:
1 - I seriously messed up my phone with that twrp. Although I was using a more recent version, I don't recommend it. Use redispade twrp instead
2 - You can and you should use another ROM. PE is dead. Just check vendor required and,if different from the one suggested by OP, flash it instead.
rzki03 said:
can we use another rom instead of PixelExperience?
Click to expand...
Click to collapse
Of course, in the example I use this room and in phome is working with some minor bugs, but @elpaablo say that it's nor longer getting support. I recommend you use another room with active development and support
elpaablo said:
2 things:
1 - I seriously messed up my phone with that twrp. Although I was using a more recent version, I don't recommend it. Use redispade twrp instead
2 - You can and you should use another ROM. PE is dead. Just check vendor required and,if different from the one suggested by OP, flash it instead.
Click to expand...
Click to collapse
Thanks, this twrp is the only that I test and work, but I don't tested the twrd indicated. And thanks for the info about the rom, I will be updated because in this time I experimented some bugs.
*************************************************************
———————— TWRP for K40 Pro + ——————————-
*************************************************************
WARNING : I do not know who made this TWRP and i am NOT taking credit for it. Someone in my group chat found it. It's apparently from China. If you are the creator , PM Me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INSTRUCTIONS
1) Download TWRP for K40 Pro + , and put it in your fastboot folder.
2) Put your phone into fastboot mode.
3) Do the following command : fastboot boot twrp-recovery-venus. It will automatically boot into TWRP.
4) Change language to English (press the 6th option).
5) Go to "Advanced" and select "Onekey inject TWRP".
6) Swipe to inject the TWRP. It might take a few minutes, so don't worry.
_____________________________________________________________________
Note: Don't change the boot slot (Slot A) or maybe will not boot at all.
Tested by @mslezak
______________________________________________________________________
Bugs: ADB Sideload is broken.
_______________________________________________________________
If you find any bug, feel free to report it down below.
Credits to @Cozzmy13 for decrypting the TWRP image! Here's the summary of events :
1) Chinese TWRP gets leaked onto my Telegram chat.
2) The recovery image is encoded and requires a dodgy chinese tool to decode it.
3) @Cozzmy13 finds a way to decode the image and make it bootable .
4) Me and Augustin El Metralleta try flashing the image, and we find out it works.
Does it suitable for K40 Pro? Did anyone try? Thanks!
K40 Pro has the same guts except the camera main and 12gb RAM so it should work
I verified a backup up image today restored worked although there wasn't much data on it. i always boot it. One time the injection made me have to use a fastboot ROM (always try deleting data first).
Have only one doubt can this twrp able to flash official china beta recovery rom for mi 11X pro?
#Update
I have flashed this twrp and it successfully booted without any issues and i have dirty flashed china beta recovery rom over chi a stable rom amd rom got flashed successfully without any issues.
But we need to flash the twrp every time when we reboot device.
cherri said:
How to make the twrp permanent then?
Click to expand...
Click to collapse
You can try to flash magisk after flashing the twrp, i'm still waiting the 7 days to unlock the bootloader so i can't try right now. If i remember correctly magisk has something that blocks "recovery-from-boot" and prevents twrp from being overwritten.
I think for now it is not possible are els he would have mentioned flashing process here instead of twrp temporary boot process, so we need to wait few more days unless someone does some miracle.
cherri said:
I think for now it is not possible are els he would have mentioned flashing process here instead of twrp temporary boot process, so we need to wait few more days unless someone does some miracle.
Click to expand...
Click to collapse
What do you mean. After flashing, TWRP was persistedm. I was also able to flash Magisk with this TWRP.
Go to "Advanced" and select "Onekey inject TWRP".
I wonder why there isn't any available tutorial on flashing twrp for this device on google, YouTube. What do you think guys?
thanks for the dev xinkid520 a chinese dev
It is indeed effective after testing, very good!
bouyhy01 said:
thanks for the dev xinkid520 a chinese dev
Click to expand...
Click to collapse
yeah he made it, but encrypted it and sold it for money.
so people from telegram decrypted it
zls8635878 said:
It is indeed effective after testing, very good!
Click to expand...
Click to collapse
So can we use this twrp permanently?
Can you tell me the steps if so?
DestroYerr said:
So can we use this twrp permanently?
Can you tell me the steps if so?
Click to expand...
Click to collapse
Go to "Advanced" and select "Onekey inject TWRP".
cherri said:
#Update
I have flashed this twrp and it successfully booted without any issues and i have dirty flashed china beta recovery rom over chi a stable rom amd rom got flashed successfully without any issues.
But we need to flash the twrp every time when we reboot device.
View attachment 5330171
Click to expand...
Click to collapse
I flashed this twrp into my phone. But when i try to install rom,recovery just flash and return to recovery again and ROM files got deleted. Could u tell me how u install this ROM?(PS my rom is (xiaomi.eu_multi_HMK40Pro_MI11i_V12.5.4.0.RKKCNXM_v12-11-fastboot)
Armstchi said:
I flashed this twrp into my phone. But when i try to install rom,recovery just flash and return to recovery again and ROM files got deleted. Could u tell me how u install this ROM?(PS my rom is (xiaomi.eu_multi_HMK40Pro_MI11i_V12.5.4.0.RKKCNXM_v12-11-fastboot)
Click to expand...
Click to collapse
Your rom version is for Fastboot, not Recovery.
k40 pro
majisk was installed.
I have a USB Memory Stick connected via an OTG cable, but I cannot mount it.
The usb format is FAT32. Please help someone.
cyaochai said:
k40 pro
majisk was installed.
I have a USB Memory Stick connected via an OTG cable, but I cannot mount it.
The usb format is FAT32. Please help someone.
Click to expand...
Click to collapse
Bro after flashing magisk, is safetynet okay?