[WIP] [ROM] [UNOFFICIAL] LineageOS 17.1 [DISCONTINUED] - Moto G7 Power ROMs, Kernels, Recoveries, & Other D

About:
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Introduction:
This is an unofficial WIP LineageOS thread for the Motorola G7 Power, codename ocean.
We support all the T-Mobile, International, and Project Fi variants, as their bootloaders are unlockable, while we can't support the Verizon and AT&T variants, as their bootloaders are permanently locked.
Changelog:
20200516 (download from Drive) (download from AFH):
Using audio configuration from @Grim truth , which is confirmed to be working
20200514 (build pulled)[/URL]:
Using @Rondeau79's audio stack, which is currently incompatible
20200511 (download):
Builds are now signed. Please wipe data if you're coming from the previous build.
The May security patch has been merged in.
Audio issues have now been eliminated.
Hotspot now works.
Issues:
VoLTE not working prior to May 6 build
[*]Hotspot issues
[*]Garbled call audio on some devices
Headset issues and no audio from local files on May 11 build
ROM:
My Google Drive folder
Android File Host
Make sure to only download the latest build.
Stock Firmware:
Official Firmware
Recovery:
Use whatever recovery you want, but I'm linking OrangeFox (courtesy of @electimon) here
Copy Partitions (To setup slot_b):
copypartitions.zip
(courtesy of @filipepferraz)
GApps:
https://opengapps.org
Pixel GApps (optimized for ocean, Open GApps can have issues)
Preparation for A/B Roms:
Download a custom recovery and the stock firmware for your variant from the links above.
Remove your Google account under Settings > Accounts then factory reset your device, as FRP is enforced.
Unlock your bootloader on Motorola's official site.
Flash your factory firmware image on slot_a.
Hold power + Volume down untill you reach bootloader (fastboot mode).
In your extracted firmware folder, open a terminal or command prompt and flash your firmware files with these commands.
NOTE: This last step installs vendor.img to slot_b as well.
ROM - Installation:
LineageOS 17.1 requires some extra steps to install properly. These instructions are brought to you by @Bernie_nix.
Boot phone into bootloader
From a PC, use one of these command to boot custom recovery (TWRP/oFox). In Linux, use the following command:
Code:
sudo fastboot boot recovery.img
In Windows or macOS, use the following:
Code:
fastboot boot recovery.img
Replace 'recovery.img' with the filename for your recovery image.
If you are coming from stock, install the copy partitions zip after your phone boots into recovery.
In TWRP/oFox go to Wipe - Dalvik/Art Cache, Data, Internal Storage and System.
In TWRP go to the Reboot menu > Switch slots OR in oFox go to the Reboot menu > Switch Slots (press the grey one)
Wipe - Dalvik/Art Cache, Data, Internal Storage and System again.
Reboot into bootloader.
Boot TWRP/oFox with the fastboot command in step 2 above.
Install LineageOS.
Reboot.
It will bootloop 2x, then take you to factory data reset screen. Select Yes. It will reboot into LineageOS. At this point, if you don't want to install anything else, you're done.
Once Lineage boots, if you want to set up GApps, Magisk or another recovery, reboot into recovery mode, install TWRP/oFox, GApps, and/or Magisk.
Reboot into the bootloader and input this.
Code:
fastboot -w
Reboot. You're done.
Updating (AKA 'dirty flash') {do not follow these steps when going from unsigned to signed builds}:
Download the updated ROM.
Reboot to recovery
Install ROM.zip + the recovery, if you're using something other than Lineage Recovery.
Reboot into recovery
Flash gapps + Magisk (if you want)
Reboot into system.
Notes:
Any time your internal storage aka "userdata" is from a stock install you must use 'fastboot -w' to erase it before using any ROM, otherwise it won't boot.
Contributing:
If you have any patches you want to make to the device-specific code, do it at my GitHub, which will be linked at the bottom. I've conveniently pinned all the repositories.
If you want to contribute to LineageOS itself, go to the LineageOS GitHub at https://github.com/LineageOS .
XDA:DevDB Information
LineageOS 17.1, ROM for the Moto G7 Power
Contributors
yagyaxt1068, electimon, erfanoabdi, The people who contributed to LineageOS and the device sources
Source Code: https://github.com/yagyaxt1068
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: No Longer Updated
Current Beta Version: 20200516
Beta Release Date: 2020-05-16
Created 2020-05-09
Last Updated 2020-07-05

Nice! I'm looking through the git repos now. What's all this with switching between LineageOS and RevengeOS? Never heard of RevengeOS before.
Edit: Is it possible to keep the stock software installed in slot A, and install this in slot B?

Greek2me said:
Nice! I'm looking through the git repos now. What's all this with switching between LineageOS and RevengeOS? Never heard of RevengeOS before.
Edit: Is it possible to keep the stock software installed in slot A, and install this in slot B?
Click to expand...
Click to collapse
I based my device tree off of @Electimon's Revenge OS device tree.
And, it is possible to keep stock installed in slot A, but slot A would be useless without a data wipe in fastboot.

I'll give it a try sometime soon. Is there anything you need help with? I'm new to Android work, but I can take a stab at it.
edit: Installed, and it's working well for the most part! I'm going to record issues here as I come across them:
moto gestures missing Actually, they are included. There are two menus: one called "Gestures" and one called "Moto Gestures". They're both under the "System" category in settings.
notification LED constantly on battery was fully charged...
Android Setup crashes after agreeing to TOS

Bug Confirmation
Greek2me said:
I'll give it a try sometime soon. Is there anything you need help with? I'm new to Android work, but I can take a stab at it.
edit: Installed, and it's working well for the most part! I'm going to record issues here as I come across them:
moto gestures missing
notification LED constantly on battery was fully charged...
Android Setup crashes after agreeing to TOS
Click to expand...
Click to collapse
I can confirm that Android Setup is crashing. This occurs with both Pico/Nano Gapps. Also, I'm not sure if this is just the nature of Lineage, but after adding a google account, the only sync toggle option is listed as "People details." I am attempting to sync my contacts from my google account but this doesn't seem to be available. This would be under settings > accounts > google > contacts. There are also some frame rate issues, particularly when switching between applications or home screens. There does not seem to be any frame rate issues within the apps themselves, however.

I just want to add that everything I need seems to be working well. I've placed several calls and the quality was as expected. This will probably be my daily driver - nice work!

Bug report....
Installed nicely in Xfinity (Comcast) Phone.
Bug report - Local music files do not play from speaker or plugin headphones. Doesn't matter if stock player or other. (But works with Bluetooth device).
However speaker and plugin headphones work from browser and apps like Spotify.

nomadman1 said:
Installed nicely in Xfinity (Comcast) Phone.
Bug report - Local music files do not play from speaker or plugin headphones. Doesn't matter if stock player or other. (But works with Bluetooth device).
However speaker and plugin headphones work from browser and apps like Spotify.
Click to expand...
Click to collapse
Try updating to the latest build. If the problem persists, let me know.

Hello all! Considering upgrading to the G7 Power and replacing my aging LG V20 and throwing LOS on it. One single question: Does your LOS support WiFi Calling, and do other ROMs? This is the single factor forcing me off my beloved old tank, I moved to the middle of nowhere and I don't have any signal, and my only option is VoLTE and WiFI Calling, neither of which is supported in LOS on the V20.
Thanks so much for your work!

vectorvitale said:
Hello all! Considering upgrading to the G7 Power and replacing my aging LG V20 and throwing LOS on it. One single question: Does your LOS support WiFi Calling, and do other ROMs? This is the single factor forcing me off my beloved old tank, I moved to the middle of nowhere and I don't have any signal, and my only option is VoLTE and WiFI Calling, neither of which is supported in LOS on the V20.
Thanks so much for your work!
Click to expand...
Click to collapse
Most ROMs (including this one) support WiFi calling. I've tested it myself.
Sent from my moto g(7) power using Tapatalk

I'm not sure if this is just me, but wired headphones/mic don't seem to work while on a call. The audio still comes through the phone speakers.
Please note that I'm still on the May 6th build.

Greek2me said:
I'm not sure if this is just me, but wired headphones/mic don't seem to work while on a call. The audio still comes through the phone speakers.
Please note that I'm still on the May 6th build.
Click to expand...
Click to collapse
It's an issue on the May 11 build as well.
Sent from my moto g(7) power using Tapatalk

Glad you can confirm. Location services also seem to be nonfunctional at the moment.

I installed the latest build (May 14th) on my device and all audio output is now broken (including calls). I have a XT1955-2.
edit: I flashed the May 11th build over the top and audio is working again.

My Moto_G7_XT1955-5_ ocean is mute completely with May 14th build.
bluetooth speakers work.

fastness said:
My Moto_G7_XT1955-5_ ocean is mute completely with May 14th build.
bluetooth speakers work.
Click to expand...
Click to collapse
That was part of a test to see if there were audio issues. It will be reverted eventually.

Greek2me said:
Glad you can confirm. Location services also seem to be nonfunctional at the moment.
Click to expand...
Click to collapse
I'm on the May 11 build and my GPS locks faster than it ever has and it's very accurate on my device. I'd even go so far as to say its faster than stock. I haven't used maps ever on my 1955-5 except on rare occasions when testing a rom but when I saw your location is off post I flipped on location tile opened Google maps and probably 2 seconds after that the dot showed just outside my bedroom window at my house. Going to run a few tests now and see what the outcome is just for kicks but seems good on my end on the May 11th build.

Yes, location is working now on the May 11th build.
I'm not sure if this is the fault of the OS, but my SMS messages are being received late and in batches. It seems that I sometimes don't receive SMS messages until I unlock the phone and open the Messages app. Is anyone else experiencing that?

Greek2me said:
Yes, location is working now on the May 11th build.
I'm not sure if this is the fault of the OS, but my SMS messages are being received late and in batches. It seems that I sometimes don't receive SMS messages until I unlock the phone and open the Messages app. Is anyone else experiencing that?
Click to expand...
Click to collapse
I get that now and I'm not rooted yet

The night light / blue light filter doesn't seem to work in the May 11th build.

Related

[Sony] Xperia Open Devices Project

Sony Mobile is committed to supporting the open developer community, and one way to show this is by publishing parts of our code as well as selected tools developed by our internal developers.
For some of the Xperia™ devices, we provide Android™ Open Source Project (AOSP) device configurations on GitHub. This means that the software will be open for you as a developer to use and contribute to. This is a way for us to support the open Android community, and it is also a tool for us to facilitate and verify contributions to AOSP.
If you want to build AOSP for your unlocked Xperia device, you find all the resources you need in the sections below.
http://developer.sonymobile.com/knowledge-base/open-source/open-devices/
Unified 3.10 kernel sources
https://github.com/sonyxperiadev/kernel
Project git
https://github.com/sonyxperiadev/
Thank You
I'm surprised to be the first user to say this, thank you.
Due to Sony's incredible hardware and open software I have not only converted many fans to Sony, but I have started a project to modify one of your phones.
This would note be possible without you and your teams corporation, so again, thank you.
Now you have the opportunity to win Sony devices every 2 months
http://developer.sonymobile.com/knowledge-base/open-source/open-devices/hero-open-source-developers/
Happy cooking
http://developer.sonymobile.com/201...-camera-available-for-experienced-developers/
enjoy
J
Hi all
We have published a new snapshot, zip v14, with camera update (improved quality and stability)
http://developer.sonymobile.com/knowledge-base/open-source/open-devices/
Enjoy
J
Hi all
I have some more exciting news
http://developer.sonymobile.com/kno...s/how-to-access-uart-ports-on-xperia-devices/
PS.if devices are not listed here they dont have the connector !
Br
J
New updates
http://developer.sonymobile.com/201...wider-range-of-unlocked-xperia-devices-video/
Enjoy
J
We have published new binaries
http://developer.sonymobile.com/downloads/tool/software-binaries-for-aosp-lollipop-android-5-1/
Br
J
Damn, just doing a repo sync... -> back to start
Do you know if that fixes the AOSP video and camera issues on the Z2 Tablet (SGP521)? Someone tested it on a Z Ultra (c6833)?
EDIT: The kernel instructions just vanished from http://developer.sonymobile.com/kno...ld-aosp-lollipop-for-unlocked-xperia-devices/ - I guess I should wait a little while till kernel is updated
Hi all
Blobs v17 are public
Happy easter
J
​
http://developer.sonymobile.com/knowledge-base/open-source/open-devices/
2016-04-22: AOSP Marshmallow binaries for Android 6.0 and AOSP Lollipop binaries for Android 5.1 updated with improved connectivity, stability and camera functionality. We’ve also added the second camera actuators for Xperia Z3 and Xperia Z4 tablet. In addition, we’ve added the camera actuator for the Xperia Z5 family for Android 6.0.
Hi all,
We have updated the build guide to support the latest features and security updates
http://developer.sonymobile.com/kno...aosp-marshmallow-for-unlocked-xperia-devices/
Enjoy
J
This talk probably belongs here instead of in the AICP thread.
Having flashed the: AOSP_M_160604_togari.zip
http://uploaded.net/file/lxsa2oqy/from/53n94q
The rom works by it self. I doubt anyone would run the rom this naked.
I have tried flashing various Gapps zip files before first boot and after first boot.
1a. Flashing rom in fastboot
1b.Reboot to twrp-3.0.2-0-togari
1c.Flash open_gapps-arm-6.0-pico-20160629.zip or open_gapps-arm-6.0-mini-20160629.zip
1d.reboot
Either gapps give the almost the same result. First try I used the mini gapps. I got to the setup wizard. When I came to the Wifi step.
The phone went black. I booted again and raced against the clock. Even if I finished the setup wizard half a second before the phone killed I always came back to the wizard on next boot.
Next try I erased all partition in fastboot and tried again with clean flash. Now flashed pico gapps. This time I came to "optimizing apps 1 of 68".
And the phone killed it self.
Flashing gapps after first boot and then rebooting to recovery does not work. It will give me a flood of force close on booting.
Same result with pico as mini.
Then I found a-gapps. A thread focusing on the issue when meeting the force close on setup wizard.
Also focusing on solving "google service stopped working".
http://forum.xda-developers.com/android/general/gapps-gapps-6-0-1-minimal-t3276606
This works.
But after flashing xposed-v85-sdk23-arm.zip in recovery. With a-gapps. The phone kills it self when booting again.
Right after the Android boot animation is finished.
Earlier this afternoon I ran a seperate test with a clean install.
I used the microG GmsCore project. Which did work flawless with google apps syncing fine!
I also had SuperSU Root BETA v2.67.zip installed along with xposed-v85-sdk23-arm.zip
http://forum.xda-developers.com/android/apps-games/app-microg-gmscore-floss-play-services-t3217616
What I am unsatisfied with is the fact that the phone turns off. Completely.
Without any warning. With a smooth transition to black like you lock the phone. And it is off.
I can't troubleshoot what is wrong when it just turns off. I need something to look at. A log.
edit1:
My issue is probably related to this
https://github.com/opengapps/opengapps/wiki/Notes-for-Android-6.0
Patch need to be included when compiling the rom.
Sources:
http://fxpblog.co/aosp/aosp-6-0/
http://forum.xda-developers.com/xperia-z-ultra/development/twrp-recovery-2-8-7-0-2016-02-03-t3307043
http://forum.xda-developers.com/android/general/gapps-gapps-6-0-1-minimal-t3276606
http://forum.xda-developers.com/showthread.php?t=3034811
http://forum.xda-developers.com/android/apps-games/app-microg-gmscore-floss-play-services-t3217616
http://www.supersuroot.com/download.html
https://github.com/opengapps/opengapps/wiki/Notes-for-Android-6.0
Other sources:
http://forum.xda-developers.com/cro...one-general/fix-setup-wizard-stopped-t3274219
I also had the force closing issue after installing open gapps pico. Just did a factory reset in TWRP and the issue was gone.
Loukiz said:
I also had the force closing issue after installing open gapps pico. Just did a factory reset in TWRP and the issue was gone.
Click to expand...
Click to collapse
It would be strange if the issue did not go away when you made a factory reset
yes but the Google Apps stayed and were fully functional after the factory reset.
Loukiz said:
yes but the Google Apps stayed and were fully functional after the factory reset.
Click to expand...
Click to collapse
Can you tell me the specific partitions you wiped in twrp?
in TWRP, if you press the wipe button, another button appears called "wipe data". On the next page there is some important information highlighted in red. That worked for me.
Loukiz said:
in TWRP, if you press the wipe button, another button appears called "wipe data". On the next page there is some important information highlighted in red. That worked for me.
Click to expand...
Click to collapse
looking at the download mirror there is a new build out. I will test tomorrow morning and see how things work
Loukiz said:
in TWRP, if you press the wipe button, another button appears called "wipe data". On the next page there is some important information highlighted in red. That worked for me.
Click to expand...
Click to collapse
An update: Flashed the AOSP_M_160717_togari.zip and open_gapps-arm-6.0-pico-20160731.zip
There is no force closes on boot. But the phone shuts down after a few seconds.
Edit2:
Wiped cache, dalvik cache, data. Still the rom shuts down.
Is your phone fully functional with gapps installed?

[ROM][Unofficial][7.1.2] LineageOS 14

LineageOS Android Distribution 14​
Lineage OS Android Distribution is the continuation of the now discontinued CyanogenMod.
Instructions​1. Make a Nandroid backup using TWRP or similar custom recovery if flashing from a different ROM.
2. Download the latest LineageOS ROM (uploading) and copy it to either the internal storage, an SD card, or an OTG usb drive.
3. Download a Nougat (7.1) Google Apps Package (GApps) for ARM devices if desired (OpenGApps recommended).
4. Boot into the custom recovery to flash the ROM and/or GApps .
5. Factory reset if flashing from a different ROM.
XDA:DevDB Information
Unofficial LineageOS, ROM for the Sprint HTC EVO 4G LTE
Contributors
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: HBOOT 2.10.0000 or 2.10.5555
Version Information
Status: Testing
Current Beta Version: lineage-14.1-20170302
Beta Release Date: 2017-03-02
Created 2017-01-22
Last Updated 2017-03-02
I'm going find this phone in one of the shoe box and install this thank you kind sir
Wow Los has finally arrived for the Jewel but my Jewel is no longer with me
I can't seems to use external sdcard as internal there's simply no option to do it while formatting. Other then this it's pretty snappy thanks again.
mecha2012 said:
I can't seems to use external sdcard as internal there's simply no option to do it while formatting. Other then this it's pretty snappy thanks again.
Click to expand...
Click to collapse
Thanks for testing! Try the new Nougat build—I wasn't able to move apps onto the SD card (that is a LineageOS bug), but I was able to format it as internal storage.
I couldn't install the latest build 14.1 well just keeps bootlooping at the HTC screen.
Wipe
Install latest build
Install Gapps 7.1 (tried without installing this also) still no go ?
mecha2012 said:
I couldn't install the latest build 14.1 well just keeps bootlooping at the HTC screen.
Wipe
Install latest build
Install Gapps 7.1 (tried without installing this also) still no go
Click to expand...
Click to collapse
There appears to be an error in the build. I will upload a new build within a day.
Edit: New build has been uploaded! Please report if it works.
Never thought my Jewel would ever see Nougat (let alone Lollipop or Marshmallow). Just flashed and all is working well so far. Awesome work!
God tier work here, I'm blown away. I misplaced my Moto G 3rd gen somewhere in my apartment, so I've given up and dusted off my Evo. I was set to just use the Viper 4.1.1 that was on there, but some apps weren't installing so I came on ol' XDA. This is much more than I expected, thank you.
With that said, any tips on getting this to activate on Sprint / Ting? It was working fine on the old rom, but not kicking in here.
I know this isn't totally related to this ROM, but maybe it can be. I'm having issue with this (and most other ROMs I try) where the per button works physically, but only the buttons light up. I have to press the power button several times to get the screen to wake. This isn't consistent though. Seems worse if the screen has been off for a while. Does anyone know of a fix, and if so, can it be incorporated into this ROM? I know there have other threads about this but it seems like they have been dropped.
idumych said:
God tier work here, I'm blown away. I misplaced my Moto G 3rd gen somewhere in my apartment, so I've given up and dusted off my Evo. I was set to just use the Viper 4.1.1 that was on there, but some apps weren't installing so I came on ol' XDA. This is much more than I expected, thank you.
With that said, any tips on getting this to activate on Sprint / Ting? It was working fine on the old rom, but not kicking in here.
Click to expand...
Click to collapse
I believe that the service must be activated on a stock ROM before flashing a custom ROM. Then, the correct APN has to be set according to the carrier under Settings > More > Cellular networks > Access Point Names.
Schiben said:
I know this isn't totally related to this ROM, but maybe it can be. I'm having issue with this (and most other ROMs I try) where the per button works physically, but only the buttons light up. I have to press the power button several times to get the screen to wake. This isn't consistent though. Seems worse if the screen has been off for a while. Does anyone know of a fix, and if so, can it be incorporated into this ROM? I know there have other threads about this but it seems like they have been dropped.
Click to expand...
Click to collapse
I am not sure of a fix, and I have not encountered this issue, but have you tried enabling Wake device using the Camera button under Settings > Buttons?
VitaTaf said:
I am not sure of a fix, and I have not encountered this issue, but have you tried enabling Wake device using the Camera button under Settings > Buttons?
Click to expand...
Click to collapse
I've tried that in the past. Forgot about it this time around. Tried it again and it seems to be about the same as the actual power button for getting the screen to come on correctly.
Good ol' Jewel. Is this rom working ok?
My wife is temporarily using my old Jewel because she dropped & broke her crappy samsung phone. can someone please tell me how this rom is working?
I appreciate your time!
King of the Couch said:
My wife is temporarily using my old Jewel because she dropped & broke her crappy samsung phone. can someone please tell me how this rom is working?
I appreciate your time!
Click to expand...
Click to collapse
The ROM is working fine for the most part. The battery is not great, but that may be due to the battery's age. Additionally, there is a bug with BoringSSL that sometimes prevents the Play Store or Gmail from working temporarily.
sounds good. yeah, I'm sure it's age. thanks man. take care-
Trouble with WiFi
Did a Full factory reset, installed rom, gapps, and supersu from TWRP, factory wipe again from TWRP; now the OS is installed and running but after connecting to my home network, says no internet access although the netork is up and running normally, all other devices connected. Any thoughts or suggestions. I have a backup of my previous state, so I can revert, but would like to keep this on 7.1 for consistency between this and my primary device. The primary use for this device is media streaming.
keysneptune said:
Did a Full factory reset, installed rom, gapps, and supersu from TWRP, factory wipe again from TWRP; now the OS is installed and running but after connecting to my home network, says no internet access although the netork is up and running normally, all other devices connected. Any thoughts or suggestions. I have a backup of my previous state, so I can revert, but would like to keep this on 7.1 for consistency between this and my primary device. The primary use for this device is media streaming.
Click to expand...
Click to collapse
I believe that the WiFi issue have been fixed in the latest build (20170522).
Thank you for this rom!
I had been using cyanogenmod 5.0 and dirtyunicorns 5.1 both were solid roms. Unfortunately the latest apps seem to run a bit slow on them. I thought it was the device but after installing this rom everything is snappy! It manages 1gig of ram better than any other rom and that 1.5ghz dualcore still runs strong. Snapchat is way more responsive on this rom, instagram and fb run without problems. GPS, 4g, sms, wifi, camera, sd storage, everything works! I've only noticed a few bugs. The wifi activity arrows don't show when something is downloading/uploading but wifi itself does work. Also, even tho I have working active cell service, it tries to activate itself again everytime I reboot and fails but calls-sms-data continue to work lol. The biggest bug is that auto-rotation stops working after 30-60 minutes and it stays stuck on portrait mode. Nothing but a full reboot will get it working again, a quick softboot won't fix it. I've tried changing the rotation settings and also added some lines to the build.prop but no solution thus far. I love this rom so much, if it's not fixed I might try some auto rotation apps. One last thing, it would be cool if the # in the status bar would go away after I close whatever app has root. The previous rom I had did that. Thank you so much to all the developers for bringing life to this phone!
familyjewels said:
I had been using cyanogenmod 5.0 and dirtyunicorns 5.1 both were solid roms. Unfortunately the latest apps seem to run a bit slow on them. I thought it was the device but after installing this rom everything is snappy! It manages 1gig of ram better than any other rom and that 1.5ghz dualcore still runs strong. Snapchat is way more responsive on this rom, instagram and fb run without problems. GPS, 4g, sms, wifi, camera, sd storage, everything works! I've only noticed a few bugs. The wifi activity arrows don't show when something is downloading/uploading but wifi itself does work. Also, even tho I have working active cell service, it tries to activate itself again everytime I reboot and fails but calls-sms-data continue to work lol. The biggest bug is that auto-rotation stops working after 30-60 minutes and it stays stuck on portrait mode. Nothing but a full reboot will get it working again, a quick softboot won't fix it. I've tried changing the rotation settings and also added some lines to the build.prop but no solution thus far. I love this rom so much, if it's not fixed I might try some auto rotation apps. One last thing, it would be cool if the # in the status bar would go away after I close whatever app has root. The previous rom I had did that. Thank you so much to all the developers for bringing life to this phone!
Click to expand...
Click to collapse
Thanks for trying out the ROM! The WiFi activity arrows are intentionally disable on LineageOS. I do not currently have an active cell service on this device, so I am unable to fix the activation bug for now. Could you flash the patch below in recovery and test if autorotation is working properly? It should also enable the option to hide the Superuser icon under "Status bar" > "System icons".

[ROM][UNOFFICIAL][7.1.1][TEST] OmniRom for Galaxy Tab A 7 LTE (SM-T285)

This is a port of OMNIRom 7.1.1 for the Samsung Galaxy Tab A 7.0 (2016) LTE SM-T285. OMNIRom aims to be a community based project and is a lot "lighter" than CyanogenMod/LineageOS.
5.1.1 is the best that you can get from samsung right now and it is not known if they plan to do any upgrades. I have absolutely no idea why samsung chose to stay with the outdated 5.1.1 mid 2016 when we already got 7.1 coming out. This custom rom is probably the best you can get if you want an upgrade from Lollipop. Performance on the latest build is also better, you be the judge.
Though this is stable enough that I use it currently as my daily driver, make sure you read the pending issues below and decide if this is acceptable to you before you flash this rom. This rom probably won't get much use out of some people until bluetooth is fixed.
Based off on OMNIRom 7.1.1 N4F260 sources which is based on Marshmallow.
For more information on OMNIRom and its features see their site here.
Device Tree:
=========
https://github.com/jedld/device_samsung_gtexslte.git
https://github.com/jedld/vendor_samsung_gtexslte.git
https://github.com/jedld/kernel_samsung_gtexslte.git
Omnirom Notes:
=============
- omnirom doesn't have ffmpeg libraries unlike the CM based roms, but no worries since I ported over CMs libraries here.
Works:
- Wifi/LTE/SMS (Some users report data intermittently not connecting, though toggling airplane mode on/off can fix it)
- Audio
- Graphics
- Bluetooth
- Wifi Hotspot
- MTP
Does not work:
- Calls (needs testing)
- Camera
- GPS (no fix)
- probably more (need testers)
Download
========
Remember flashing an unofficial ROM on your samsung device will probably void your warranty. Don't expect samsung to support you if you have any issues.
As always flash this at your own risk. Make sure you have a copy of the stock ROM so that you have something to fall back to, which is highly the case when using an experimental rom.
See DevDB download section for older releases. Or click below for the latest release:
https://forum.xda-developers.com/devdb/project/dl/?id=23245
Note that this rom is pure stock and does not come with the Play Store or any Gapps, I suggest you download a micro gapps package separately and install it via recovery.
There have been reports that recent versions of open gapps don't work properly, it is advised to use older versions instead (e.g. open_gapps-arm-6.0-nano-20161109.zip)
Installation Instructions
==================
Perform a backup of all of your important files. This ROM is experimental and I will not be responsible for your loss of data.
Download the zip file and extract the tar.
Use Odin/Heimdall to flash the tar file to your device. If you are coming from stock oranother rom make sure you wipe first using TWRP. Coming from a previous version of OMNIRom for SM-T285 may not require a wipe, however please perform a wipe if you encounter problems.
Root and customization
===================
This ROM is a purely based on source and is not rooted out of the box. However you can easily root it by using TWRP to install the latest version of SuperSU.
If you want to customize this ROM and repackage it you may use this guide as a reference.
XDA:DevDB Information
Omnirom 7.1.1 Galaxy Tab A 7 LTE SM-T285, ROM for the Samsung Galaxy Tab A series
Contributors
jedld
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: Omnirom
Version Information
Status: Testing
Created 2017-02-18
Last Updated 2017-02-20
Possible Hope?
Im Not A Developper But I'm The Closest Thing There Is To It. Il Be Running Some Tests To See If It Might Be Compatable With The Sm-t280 Model. Any Boot.Img I Should Install First?
thanks Jedid-did you have a link here for the ROM as I cannot see it (says status is testing so perhaps a placeholder?) as always great work!
mac231us said:
thanks Jedid-did you have a link here for the ROM as I cannot see it (says status is testing so perhaps a placeholder?) as always great work!
Click to expand...
Click to collapse
should be available now
Tinker101 said:
Im Not A Developper But I'm The Closest Thing There Is To It. Il Be Running Some Tests To See If It Might Be Compatable With The Sm-t280 Model. Any Boot.Img I Should Install First?
Click to expand...
Click to collapse
It will be a long shot, there are hardware differences, but nothing stopping you from trying it. Do note that the T280 has a padded boot.img see here, which means you need to get the boot.img from this rom and add an additional header in front of it before you flash it with heimdall or odin.
jedld said:
should be available now
Click to expand...
Click to collapse
thanks Jedid
will look in a couple of days when I the Tab back (gave it to a friend)
EDIT
tried the ROM today...calling is a problem (for me) tried multiple times of reboot and allowed rom to settle before making calls (4g and data in out activity was showing-could go to internet)
The call does not connect and sits in dialing mode forever...if you try to hang up it then sits in hanging up mode and will not terminate
(shows a call in progress as if it is still on)...sms works
With all credit to you and all due respect...I stopped there-
think your very FIRST Lineage 14.1 was the best in all the Nougat ROMs
(the next one had issues with the drives seen but not accessible even though the MTP thing was purported to have been solved in that one)-i.e no real files just drives with overall sizes shown and then the lockscreen issue made it unusable (the PIN and notification method was risky as swiping the notification accidentally would lead to an inaccessible phone or maybe demand a reboot)
Works for me
I don't use the Sim functionality at all, so can't comment on that. I had to try a few variations of GApps to get a working Google Play service, and finally managed with the Dynamic GApps 20170215 Minimal build. Once I got that going, everything worked well. I'm using this as my daily ROM on the tablet now, so will report any further issues I have. Just wanted to say a big thank you! This ROM is very fast and smooth.
home button to wake up device
hi, i just use this rom and its really fast..
just want to ask how to make home physical button to wake up device beside the power button ?
Original Link worked but the file i got
"omni-6.0-20161209-UNOFFICIAL-SMT285-BETA-3.tar"
did not flash, rejected by Odin.
The new one you have linked works
"omni-7.0-20170219-UNOFFICIAL-SMT285.tar"
Quick scan results:
Mem use 462mb of 1.4gb
Space use 2.71 of 7.28gb
Apps installed 17
Very Similar to Lineage "LINEAGE-OMS-14.1-20171209-UNOFFICIAL-SMT285.tar".
In fact almost exact other than a couple of megabytes and an app.
This is BEFORE SU And APP Remover has gone in to shred some files
Stock rom: Terrible
Mem use 5 TB of 1.4gb
Space use Smoke coming out of 7.28gb
Apps installed Still counting I was sure it would finish last week.
Stock rom: Terrible
Mem use 874mb of 1.4gb
Space use 3.7gb of 7.28gb
Apps installed 64
Vol Down Button
Home
Power
[DOWNLOAD SCREEN]
Vol Up to confirm
{Go to PC Odin}
Load AP Custom Rom (TWRP Required)
Press Start...
file explorer cannot read files in internal and external sd card, is it just me, or anyone else?
Download
thank
Can anyone send me other link this ones showing not found.
Link not found
thatha said:
Link not found
Click to expand...
Click to collapse
index - powered by h5ai v0.30.0 (https://larsjung.de/h5ai/)
index - powered by h5ai v0.30.0 (https://larsjung.de/h5ai/)
aol.zanoza.lv
Here is the link.
Reload 4 times if not loading.

Sourcebuilt Oreo ROM for Nexus 6

This ROM is Going to be Primary Based on LineageOS 15.0 source or ROM compiled with Base as LineagesOS 15.0
I am going to regularly compile it and going to share it with community over here
Features of This ROM Based on LineagesOs 15.0
Customizable Theme Engine (Blend with Substratum)
Picture in Picture Mode of Android Oreo
Notification Dots
New user interface in Settings
Split Screen
Improved battery life
Notification Snoozing
Android Oreo Navbar
New UI in Status Bar and Quick Tiles
New Emojis based on Android Oreo
And much more.
Download
For Nexus 6 Android file Host
Gapps For Oreo
Opengapps You can get that from Oppengapps.org
Gaapps For 8.1 Till Open gapps start official Build
The Build is from @Nezorflame And Gapps downlod from
Do NOT expect daily builds. I'll build when I'm free.
Do NOT use this unofficial build and ask for support at the official threads.
Do NOT be rude.
Respect all users
If you see a NOOB question and you don't feel like replying, DON'T, just ignore that post. If you do reply, good for you.....and be nice in your reply.
1st Time Installing
You Need To have Rooted and Custom Recovery Installed Phone To Use This ROM
If you are New Just Go To This Thread and Download Wug's Nexus Tool Kit And Follow Instructions.
Once Custom Recovery Installed. TWRP 3.1.x recommended
Download the zip
Download Gapps
WIPE DATA/FACTORY RESET
Install Modem/Firmware Update
Install the update zip from recovery
Install Gapps
flash Magisk14.1 or 14.0 .zip
Reboot
Already Using the Previous Version of Same ROM
Download the zip
Install latest zip from recovery
wipe Cache
Reflash Gapps
Flash Magisk
Reboot
Credits:
LineagesOs team
CRdroid Team
ScottHeart BTi
He][razor
Vortex 1969
neobuddy89
XDA Developers community
The users and all developer of XDA who has helped me direct or indirect way
Google for Android.
If I miss someone Here please point it out to me.
Source
https://github.com/LineageOS/
https://github.com/crdroidandroid
XDA:DevDB Information
SourceBuilt ROM for Nexus 6, ROM for the Nexus 6
Contributors
chineel, chineel
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Based On: LineageOs
Version Information
Status: Beta
Created 2017-10-28
Last Updated 2017-10-28​
Hi everyone The ROM Upload is still On
I have two build Ready One is LineagesOs unofficial and second One CrDroid4.0 which is also based on LineageOs 15.0
Both Got Uploaded
first is Crdroid
crDroidAndroid-8.0-20171028-shamu-v4.0.zip
Second One is LineagesOs-15.0
lineage-15.0-20171028-UNOFFICIAL-shamu.zip
Both Rom are unofficial nothing official about it.
For best error free opration you need to have it Clean Installed
means
Factory reset
wipe
System, Cache,
Flash ROM
Flash Gapps
Flash Magisk / Super Su for rooting
Wait for a while
let it get settled
Enjoy the New Oreo 8.0
11/07 Build Onwards forced encryption is removed so your data by default is not encrypted anymore.
For all those having trouble booting should follow below steps.
get ADB fastboot installer from here
Take back up of everything including DCIM and TWRP or TITANIUM or SMS contact backup or any other.
reboot to bootloader.
open command prompt.
fastboot format userdata (This will format everything on internal storage and will recreate data partition)
wait till success message.
reboot to recovery
wipe system cache data (if you like to but not needed this time)
flash ROM
Flash Gapps of your choice.
wipe dalvick and cache
Reboot
wait for a while
let your phone settle for some time.
reboot to recovery again
flash magisk
reboot
Enjoy your phone unencrypted and fresh as new. Connect to pc copy back your data
restore back whatever you want to restore enjoy.
3rd one
i may Need this one also
Great work! Had any issues with random reboots?
rebel1699 said:
Great work! Had any issues with random reboots?
Click to expand...
Click to collapse
No No reboot since yesterday on my phone
chineel said:
No No reboot since yesterday on my phone
Click to expand...
Click to collapse
Good deal. Will install in the morning and test it out. Again, great work to help keep shamu alive
Hey man thanks for the efforts, a little OT question tho, i saw you got a crDroid build on AFH, are you the new maintainer? edit: Oops, just read the 2nd post ^^ .
gr3ud said:
Hey man thanks for the efforts, a little OT question tho, i saw you got a crDroid build on AFH, are you the new maintainer? edit: Oops, just read the 2nd post ^^ .
Click to expand...
Click to collapse
I am going to request for that if I can continue compiling this ROM but till then Unofficial only
Downloading now. Pretty excited since I'm currently running crdroid.
Do you keep a changelog you're willing to share?
Schiben said:
Do you keep a changelog you're willing to share?
Click to expand...
Click to collapse
For CRdroid already in ROM About section attached here also
Lineageos changelog https://www.lineageoslog.com/15.0
Thank you very much for your great work ? I like this rom
I will try LOS version tonight. Any known bluetooth or Mobile data issues so far ?
Thanks for the effort and appreciate the continued update for Nexus 6.
Hi, I appreciate the effort. Mind telling us the differences between ROMs though? Does the CR one have more features than the stock based Lin one? Still going to test them both but was just wondering, thanks.
mobile data is ON by default, and even when you're connected with Wifi, it still uses your data. Blew thru my 200meg Free T-mobile trying to finish an install. Also, found that NFC is turned off. Might be a driver issue.
Battery life is OK. Sound is bad on my device. Playing some youtube videos, and the sound goes from very loud, to I can barely hear it, plus the only speaker working, is the top, the bottom one cuts in and out. (at least in youtube)
not a bug report, or any disrespect to the dev. but, its just what I've had happen while using this rom.
newsguy99 said:
mobile data is ON by default, and even when you're connected with Wifi, it still uses your data. Blew thru my 200meg Free T-mobile trying to finish an install. Also, found that NFC is turned off. Might be a driver issue.
Battery life is OK. Sound is bad on my device. Playing some youtube videos, and the sound goes from very loud, to I can barely hear it, plus the only speaker working, is the top, the bottom one cuts in and out. (at least in youtube)
not a bug report, or any disrespect to the dev. but, its just what I've had happen while using this rom.
Click to expand...
Click to collapse
Mobile data can be stopped from developer options and untick mobile data always on
steps
1 Open about Phone
2 Go to build number
3 Tap continuous till you got message you are now developer.
4 Tape on Back button
5 You will be seeing Developer options now
6 scroll down till you see mobile data always on toggle it off
Bluetooth issue was found for me when connected to my head unit in my truck. It connects, blurps sound out for half a second and then nothing the songs/videos(videos also go down to like 2 fps while paired) are still playing during but no audio. It's late I just got home will try to capture a log tomorrow. Other than that this rom is butter smooth, thanks for your hard work keeping our old whale swimming. Plz remove if it needs to be I won't be butthurt about it.
Xd great work!

[ROM][(Un)OFFICIAL] LineageOS 15.1 for Nexus 6 (shamu)

LineageOS is a free, community built, aftermarket firmware distribution of android, which is designed to increase performance and reliability over stock android for your device.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Wiki.
Important Info
DON'T USE TWRP 3.0.2-0 OR OLDER WITH LINEAGEOS. IT DOES NOT WORK CORRECTLY. USE VERSION 3.2.1.0 HERE
Current lineage 15.1 shamu nightlies are based on the N6F27M October 2017 update from google.
So you should be using the radio and bootloader img from that update.
If you already have those you don't need to flash them again.
They can be extracted from the factory image on google's site here.
Or you can use the ones linked below that I already extracted:
radio-shamu-d4.01-9625-05.45+fsg-9625-02.117.img
bootloader-shamu-moto-apq8084-72.04.img
IMPORTANT NOTE FOR VERIZON USERS: Google released a separate October 2017 security update (NGI77B) just for verizon users that has a different radio. So you'll want to flash it. I repeat, THIS RADIO IS JUST FOR VERIZON USERS.
radio-shamu-d4.01-9625-05.51+fsg-9625-02.118.img
You can use fastboot to flash the bootloader and radio.
More information and installation instructions can be found on the LineageOS wiki here.
Download Links
LineageOS OFFICIAL: https://download.lineageos.org/shamu
As you will see it is no longer available and there will be no new OFFICIAL builds as shamu has been promoted to LineageOS 18.1.
Seems an archive of the official 15.1 builds is here. To check official signature you can follow this guide
LineageOS UNOFFICIAL: lineage-15.1-20220301-UNOFFICIAL-shamu.zip
Includes the now (no longer official from now on as per comments here) non official February 2022 security bulletins.
Here is its md5sum.
Google apps: MindTheGapps or OpenGAPPS <= nano
HEADS UP:
When you initially install LineageOS, be sure you flash the gapps package with your ROM. If you boot your ROM, then go back and try to flash gapps after, you're gonna have a bad time.
If you are migrating from an OFFICIAL build to the UNOFFICIAL build you have 2 options:
Wipe data and do a clean install of UNOFFICIAL build
Dirty flash thanks to an intermediate MIGRATION build
First flash the MIGRATION build (lineage-15.1-20200501-MIGRATION-shamu.zip md5sum), boot to it and then flash the UNOFFICIAL build and boot to it.
SU addon zip: Addon Install zip / Addon Removal zip
NOTE: LineageOS does not come with root, so this is now provided for those that want it.
The install zip is a one time flash, like gapps.
Meaning, it persists when updating to a new LineageOS nightly.
Changelog
Builddate: 2018.07.17
Changes:
[new] Full featured, binderized power HAL with support for following power profiles:
- Power save => Maximum of 2 cores online, max. freq limited to 1,036 GHz
- Bias power => Up to 4 cores online, max. freq limited to 1,036 GHz
- Balanced => Up to 4 cores online, no freq limits
- Bias performance => Up to 4 cores online, min freq limited to 1,19 GHz
- Performance => 4 cores online always at 2,6 GHz
[new] Core hotplugging through new mpdecision
Known Issues:
[bug] Trusted voice is not working and probably never will
[bug] TWRP is not able do decrypt your data if you encrypted it with lineage-15.1
[bug] Not every app is compatible with the expanded desctop feature. If you have ranndom problems to turn on your device
disable expanded desktop for the app
Older Changelogs:
Builddate: 2018.06.19
Changes:
[new] Full RGB brightness support
Builddate: 2018.06.12
Changes:
[new] LineageOS's Trust
[new] Spectre V1 patches
[new] june security fixes
[fix unconfirmed] Camera app 'missing' on some devices
Builddate: 2018.05.28
Changes:
[new] Option to check proximity sensor before device is woken up with dt2w
[new] Stereo recording in all available formats
[fix] DRM is now L1
[fix] SU hiding is now working properly
Builddate: 2018.05.21
Changes:
[new] New BT power management driver with less wakelocks
Builddate: 2018.04.30
Changes:
[new] Stereo recording
[new] Ability to edit apn regardless of carrier
Builddate: 2018.04.23
Changes:
[fixed] DRM now working on L3
Builddate: 2018.04.16
Changes:
[fixed] Netflix not working: DRM issue
[fixed] Camcorder audio too low
[new] Get rid of forceencryption
[new] BCL not turning of core 2 and 3 at ~40 % battery anymore
We're limiting the max frequency instead
Builddate: 2018.04.12
Changes:
[fixed] Double touch to wake
[fixed] Power HAL loading
[fixed] Vendor image mismatch notification popping up every boot
[new] Optimized boot latemounting of data and cache
Known Issues:
[bug] Netflix not working: DRM issue
[bug] Camcorder audio too low
[bug] Trusted voice is not working and probably never will
Builddate: 2018.04.02
Known Issues:
[bug] Vendor image mismatch notification popping up every boot. Just ignore it
[bug] touch to wake is not working
[bug] Trusted voice is not working and probably never will
XDA:DevDB Information
LineageOS, ROM for the Nexus 6
Contributors
Elektroschmock, Elektroschmock, dwardo
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Version Information
Status: Nightly
Created 2018-04-04
Last Updated 2020-11-14
Thank you for your support...
I am getting this message on every reboot https://ibb.co/gUBVux
I have downloaded N6F27M from google but there is no vendor.img in the zip file
aqatramiz said:
Thank you for your support...
I am getting this message on every reboot https://ibb.co/gUBVux
I have downloaded N6F27M from google but there is no vendor.img in the zip file
Click to expand...
Click to collapse
It's nothing you should worry about...just ignore it.
It will be fixed with the next nightly.
You might want to add the info about "vendor image" + "counterfeit april fools joke" + "double tap 2 wake not working yet" + into the op under known issues or something. I see those questions posted over and over again in the old thread and other communities
People should use TWRP 3.2.1.0 with LOS 15.1
https://dl.twrp.me/shamu/
First of all, thank you very much. I'm using my Nexus 6 only as a secondary device but I'm happy to upgrade it to LineageOS 15.1 now
Does it support FBE or direct boot? I'm already running LOS 14.1 and not quite sure if encryption changes upon a data wipe
While on a phone call adding another call, then merging the two results in dropping both lines.
Install:
Wiped, lineage-15.1-20180402-nightly-shamu-signed.zip, opengapps super, magisk.
Logcat: https://drive.google.com/file/d/1XQbvCKna63HG1rPdNP3VoBXwznAxEaib/view?usp=drivesdk
never mind
mugendon said:
Yap, just what the op says in red letters
Click to expand...
Click to collapse
What I meant is advice people from beginning ro use 3.2.1.0 because there are in between version too.
Is the SU addon zip coming anytime soon?
You can get 'double tap to wake' working if you enable it via something like EX Kernel Manager.
Sent from my Nexus 6 using XDA Labs
---------- Post added at 01:44 PM ---------- Previous post was at 01:38 PM ----------
rodritoledo94 said:
Is the SU addon zip coming anytime soon?
Click to expand...
Click to collapse
https://forum.xda-developers.com/ne...om-cm14-1-nexus-6-shamu-t3514362/post76101587
Also, Magisk works great on this ROM.
Sent from my Nexus 6 using XDA Labs
someone is experiencing a problem with huge battery drain via Google Play Services?
i have clean install with full wipe (installed factory image -> twrp -> full wipe -> LOS 15.1 + OpenGapps)
and 2nd problem is strange "beep" after incoming/outgoing phone call
Running perfectly (using opengapps nano and magisk 16.1).
- Had one reboot 48hrs ago and nothing since.
- Some lag in a couple spots, but may still be settling in.
- Netflix, you have to roll back to v4.6.
- Battery drain is identical to 14.1 for me (edit: Meaning no bad drain at all...it's ideal)
- Had some minor signal issue with cell calls in spots that are normally good, but that could be weather/sunspots/aliens.
- Had no issue removing the LOScoins alert.
rodritoledo94 said:
Is the SU addon zip coming anytime soon?
Click to expand...
Click to collapse
It's better to use Magisk on Android 8+.
Lagarde said:
Running perfectly (using opengapps nano and magisk 16.1).
- Had one reboot 48hrs ago and nothing since.
- Some lag in a couple spots, but may still be settling in.
- Netflix, you have to roll back to v4.6.
- Battery drain is identical to 14.1 for me
- Had some minor signal issue with cell calls in spots that are normally good, but that could be weather/sunspots/aliens.
- Had no issue removing the LOScoins alert.
Click to expand...
Click to collapse
Using micro, everything is working great.
...
Another report for all good. I upgraded from the latest 14.1 nightly: Updated TWRP; Wiped system, dalvik, cache; flashed 15.1 nightly and then mind_the_gapps; boot once, then reboot to TWRP and flash Magisk. Apps all still work; all good! Thanks for the great build!
Been using this for 2 days now. A couple of issues:
Biggest issue is Netflix issue. Also heard YouTube TV isn't working, but I haven't had the opportunity to test it.
Stutters when unlocking. Also when switching between apps using the multitask button (or whatever it's called).
I haven't run into any other problems (outside the ones listed in OP).
ExpectedCrayon said:
Been using this for 2 days now. A couple of issues:
Biggest issue is Netflix issue. Also heard YouTube TV isn't working, but I haven't had the opportunity to test it.
Stutters when unlocking. Also when switching between apps using the multitask button (or whatever it's called).
I haven't run into any other problems (outside the ones listed in OP).
Click to expand...
Click to collapse
This is because DRM Widevine L1 or L3 hasn't been implemented yet. Other Oreo Roms have however. Netflix and YouTube check for this now.
Any suggested kernel for the Lineage 15.1?
My phone started stuttering (As per CPU-z it looked like two cores were offline when the battery was low) and I thought of trying PureZ Kernel 5.2, but with that my phone got stuck at the boot logo for hours. Reinstalled Lineage 15.1 to fix that and wanted to check with others before trying a new Kernel.
wavedashdoc said:
This is because DRM Widevine L1 or L3 hasn't been implemented yet. Other Oreo Roms have however. Netflix and YouTube check for this now.
Click to expand...
Click to collapse
Do you know if there are plans to implement it?
---------- Post added at 05:43 PM ---------- Previous post was at 05:41 PM ----------
manish_bhaumik said:
Any suggested kernel for the Lineage 15.1?
My phone started stuttering (As per CPU-z it looked like two cores were offline when the battery was low) and I thought of trying PureZ Kernel 5.2, but with that my phone got stuck at the boot logo for hours. Reinstalled Lineage 15.1 to fix that and wanted to check with others before trying a new Kernel.
Click to expand...
Click to collapse
I'm waiting for Franco Kernel. There isn't an Oreo version yet, but the dev said he intends to make a version for Lineage 15.1 Shamu on his Google + a few days ago.

Categories

Resources