Related
Here is the last version at the moment of the Maze alpha ROM (tested only in 4GB version)
It's a complete ROM, not an OTA update, it can be flashed using the provided TWRP 3.2.1 version, I ported from a Jemmini (many thanks) version for Bluboo S1.
Unfortunately, the TWRP cannot be flashed (issue with the touch panel), only launched by fastboot.
The ROM is the same as the v8 official one except that it is rooted using Magisk 15.2 and busybox 1.27.2 (thanks to osm0sis) is installed in /system/xbin
There is also a SPFlashTool clean version of this ROM, useful in case of troubles (as official: no root, no busybox)
1- Reboot you phone in fastboot mode : adb reboot bootloader
2- Flash the provided TWRP : fastboot flash recovery recovery_maze_alpha_4G_twrp-321.img
3- Reboot to TWRP recovery
4- copy in your SDCARD and install, in the running TWRP, the downloaded ROM V09 : Maze_Alpha_4GB_v09_TWRP.zip
The first boot take some minutes so be patient.
Here the SPFlashTool versions :
MAZE_Alpha_4GB_V09_SPFT.zip
Here, if needed, my V09 TWRP backup (new one from 21/04/2018) :
TWRP_BACKUP_MAZE_Alpha_A_V09.zip
Credits to Jemmini and Magisk team.
Can you make this for the 6 gb version?
many thanks gonna ty it soon
Nautilus99 said:
Can you make this for the 6 gb version?
Click to expand...
Click to collapse
I do not have the 6GB version
If I can download a stock ROM and a recent OTA update, I will do that.
Maze do not help us unfortunately
No complete stock ROM, No kernel source nothing !!!!!!!!!!
dreambo said:
I do note have the 6GB version
If I can download a stock ROM and a recent OTA update, I will do that.
Maze do not help us unfortunately
No complete stock ROM, No kernel source nothing !!!!!!!!!!
Click to expand...
Click to collapse
Yes i know its sad, i did a backup of mine and root it but it didnt work the backup i had to do clean flash, if we can manage to have a twrp and a source of the stock roms we could make a deabloat and put update apps ( menssages, calendar etc) and put mods for awsome features i dont see RR or lineage putting thier hands on this phone
Thanks for this Rom.
Is there any root for the maze alpha x?
here
WiddleyScudds said:
Is there any root for the maze alpha x?
Click to expand...
Click to collapse
read
The ROM is the same as the v8 official one except that it is rooted using Magisk 15.2 and busybox 1.27.2 (thanks to osm0sis) is installed in /system/xbin
Click to expand...
Click to collapse
thorfr said:
read
Click to expand...
Click to collapse
I have an alpha x, not alpha.
Thanks for ROM
When I install this ROM, from TWRP, i need install anything for root (Supersu)? Or when I install this ROM, I have root?
rzoli71 said:
Thanks for ROM
When I install this ROM, from TWRP, i need install anything for root (Supersu)? Or when I install this ROM, I have root?
Click to expand...
Click to collapse
No it is already rooted.
Reboot your phone to android, and then install MagsikManager.apk
I am editing my post to give you a 100% working TWRP 3.2.1 for our beloved Maze Alpha 4G :victory:
thank you
After I installed this rom, and freezed the hot knot, baidu_location FM Radio, etc, the BT connection did not break.
dreambo said:
No it is already rooted.
Reboot your phone to android, and then install MagsikManager.apk
I am editing my post to give you a 100% working TWRP 3.2.1 for our beloved Maze Alpha 4G :victory:
Click to expand...
Click to collapse
Hi dreambo,
do You know if there's a stock rom for download from maze alpha x? I think it's important for normal users and developers to get one. For normal users it's important to have an option to reinstall stock version and for developers I think it's the source for custom roms (e.g. Lineage Os).
If You know a source, can You please give us a link?
ahorntaler said:
Hi dreambo,
do You know if there's a stock rom for download from maze alpha x? I think it's important for normal users and developers to get one. For normal users it's important to have an option to reinstall stock version and for developers I think it's the source for custom roms (e.g. Lineage Os).
If You know a source, can You please give us a link?
Click to expand...
Click to collapse
No I not have any source, I am just a simple user like any other.
If I have any source or if I can make a ROM for MAZE Alpha X, I will do it and I will share it with every body, as I do until now for the MAZE Alpha 4/64
Hi
Sorry for stupid question, but is flashing with SP Flashtool an option to get root without wiping all data (unlike all other methods involving bootloader unlocking)?
iBolitN said:
Hi
Sorry for stupid question, but is flashing with SP Flashtool an option to get root without wiping all data (unlike all other methods involving bootloader unlocking)?
Click to expand...
Click to collapse
Unfortunatly no. As you will see repeated times in the forum, people have issue with phone not booting after changing from stock recovery to twrp. This is do (most likely from) to verified boot setting. And by unlocking bootloader we can bypass verified boot. So without unlock you might get a successfull load into twrp, but android will not boot.
Hello to all and please help if you can.
After unlocking the bootloader and flash the rom I'v got orange state with bootloop. Then after trying to fix it (wrong way) and relock bootloader and got red state with bootloop. I read that flahing back to stock fix the problem but I have no success with the rom provided in this post, the v5 from maze, the latest flash tool and the maze alpha flash tool... in all cases I get DA error(maze flash tool) or DA MISHMATCH (sp flash tool). I also tried different pc and cable with no result and finaly can't get fastboot. If that helps I've got the same flash tool error before the procedure. Every help will be appreciated.
stargazer78 said:
Hello to all and please help if you can.
After unlocking the bootloader and flash the rom I'v got orange state with bootloop. Then after trying to fix it (wrong way) and relock bootloader and got red state with bootloop. I read that flahing back to stock fix the problem but I have no success with the rom provided in this post, the v5 from maze, the latest flash tool and the maze alpha flash tool... in all cases I get DA error(maze flash tool) or DA MISHMATCH (sp flash tool). I also tried different pc and cable with no result and finaly can't get fastboot. If that helps I've got the same flash tool error before the procedure. Every help will be appreciated.
Click to expand...
Click to collapse
First unlock again your bootloader and use fastboot to flash boot, recovery and system partitions:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img.
Those partition images can be found in the ROM for SPFlashTool I have provide.
After that you can boot android normally.
If you any TWRP backup, you can restore it after flashing the TWRP.
Thanks a lot for your reply....
the problem is that i cant boot into fastboot to unlock bootloader....
the phone bootloops all the time, shows the red state alert and even with vol+ pressed the menu to choose recovery or fastboot doesn't apear... thanks again.
dreambo said:
First unlock again your bootloader and use fastboot to flash boot, recovery and system partitions:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img.
Those partition images can be found in the ROM for SPFlashTool I have provide.
After that you can boot android normally.
If you any TWRP backup, you can restore it after flashing the TWRP.
Click to expand...
Click to collapse
Is there any way to unlock the bootloader in my situation or/and enter the fastboot mode in order to follow your steps... thanks.
welcome ,
Moto One Power Stock Rom Twrp Flashable
with bootloop protection , Flashes are done inside fastboot environment
and you will experience a aroma based hyper shell user interface.
things You need
Full stock room zip download below
Twrp Installer zip v3.2.x : link Thanks to @lalitjoshi06
Motorola One Power , ofcourse
Steps to flash :
If you are in custom rom or stock rom steps are all same
boot to twrp
flash the zip
Do not wipe or erase anything all are automated , just reboot Twrp and flash the zip
PS: FULL STOCK ROM can take a little while to flash . have patience.
PSo not wipe or erase anything all are coded to be done automatically
just boot Twrp an flash the zip
Download Link : here
XDA:DevDB Information
Stock ROM and Firmware for TWRP, ROM for the Motorola One Power
Contributors
nageen9211, [email protected]
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2019-03-29
Last Updated 2019-08-19
Reserved
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
nageen9211 said:
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
Click to expand...
Click to collapse
Do you have a guide on how to make a stock flash zip file. I want make one for my device as well. Or if I give you the files can you help me out?:fingers-crossed:
xperia_bird said:
Do you have a guide on how to make a stock flash zip file. I want make one for my device as well. Or if I give you the files can you help me out?:fingers-crossed:
Click to expand...
Click to collapse
#OT
it might vary from device to device.. in this what i did is:
* extracted partition dump from device using adb shell(need root)
Code:
dd if=/path/to/partition/ of=/sdcard/or/anything
* then made the zip (You can use mine just replace the files with your device correct files.. and you are good to go.
* othe guy did more amazing hacks.. like he made some fastboot envoronment in twrp and directly made zip from fastboot images.. although those images are pretty much same as extracted from sdb but sparsed you can have look on them too
hope it helped
nageen9211 said:
#OT
it might vary from device to device.. in this what i did is:
* extracted partition dump from device using adb shell(need root)
* then made the zip (You can use mine just replace the files with your device correct files.. and you are good to go.
* othe guy did more amazing hacks.. like he made some fastboot envoronment in twrp and directly made zip from fastboot images.. although those images are pretty much same as extracted from sdb but sparsed you can have look on them too
hope it helped
Click to expand...
Click to collapse
Thankyou for Reply and I want to try it. Because it might help me to get back to stock. But only problem is I have a stock rom on my computer. In my device is a custom rom installed. And cant go back to stock, because my device gets in bootloop after flashing stock rom.
Do you think when I make a flash zip, that I can bypass bootloop?
Bootlooping
xperia_bird said:
Thankyou for Reply and I want to try it. Because it might help me to get back to stock. But only problem is I have a stock rom on my computer. In my device is a custom rom installed. And cant go back to stock, because my device gets in bootloop after flashing stock rom.
Do you think when I make a flash zip, that I can bypass bootloop?
Click to expand...
Click to collapse
First you need to find the reason for bootlooping then only making the stock zip is possible
Actually installing stock ROM from pc should not give bootlooping if bootloop occcrs you messed up with files check whether the files belonging to your device model reply with device model and other stuffs
[email protected] said:
First you need to find the reason for bootlooping then only making the stock zip is possible
Actually installing stock ROM from pc should not give bootlooping if bootloop occcrs you messed up with files check whether the files belonging to your device model reply with device model and other stuffs
Click to expand...
Click to collapse
But how to take a log if i cant enter system or connect adb for trying find the reason of bootloop.
Do you maybe know a way?
xperia_bird said:
But how to take a log if i cant enter system or connect adb for trying find the reason of bootloop.
Do you maybe know a way?
Click to expand...
Click to collapse
Your device and model
[email protected] said:
Your device and model
Click to expand...
Click to collapse
Lenovo Z5, L78011.
nageen9211 said:
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
Click to expand...
Click to collapse
I tried an AOSP Rom and found out that VoLTE is not working. So I flashed to stock using this method.
All is now working, but I am repeatedly getting this error message regarding Motorola update being unsuccessful, which is burning down my battery faster.
What can I do about it?.
Please help.
Plz make multirom twrp for moto one
anurag_xpert said:
I tried an AOSP Rom and found out that VoLTE is not working. So I flashed to stock using this method.
All is now working, but I am repeatedly getting this error message regarding Motorola update being unsuccessful, which is burning down my battery faster.
What can I do about it?.
Please help.
Click to expand...
Click to collapse
is there any update available.. update that with fastboot firmware.. becuase for som ereason it cannot update for you..
nageen9211 said:
is there any update available.. update that with fastboot firmware.. becuase for som ereason it cannot update for you..
Click to expand...
Click to collapse
Thanks for the reply. I have downladed april fastboot flashable rom from Mororola updates (link shared at telegram channel) but when i unpacked it, there was no flash script inside, so I could not flash that stock rom and I am still getting this error.
If you or somebody can share that flashall.bat script, i will be thankful.
edit: managed to flash the latest official firmware using youtube tutorial by andro guruji.
All my data was also safe.
Thanks again.
Will I get official updates after flashing this stock rom??
flashall.bat error
nageen9211 said:
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
Click to expand...
Click to collapse
i got factory rom ie .tar file for moto one power
i try to flash from fastboot and using flashall.bat in the stock rom folwer it show error
the system cannot find the path specification
how to get ride from this
Directory error
lbcsc.clx said:
i got factory rom ie .tar file for moto one power
i try to flash from fastboot and using flashall.bat in the stock rom folwer it show error
the system cannot find the path specification
how to get ride from this
Click to expand...
Click to collapse
Do not open cmd directly go to the folder where your Moto system files present and press shift and write click then press open command window here then type fastboot commands
[email protected] said:
Do not open cmd directly go to the folder where your Moto system files present and press shift and write click then press open command window here then type fastboot commands
Click to expand...
Click to collapse
See the cmd in screenshot below
nageen9211 said:
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
Click to expand...
Click to collapse
Can you please post the link for the july patch or if possible please provide the link for july full stock rom. I am not able to update via OTP. Tried everything.
nageen9211 said:
welcome ,
Moto One Power Stock Rom Twrp Flashable
with bootloop protection , Flashes are done inside fastboot environment
and you will experience a aroma based hyper shell user interface.
things You need
Full stock room zip download below
Twrp Installer zip v3.2.x : link Thanks to @lalitjoshi06
Motorola One Power , ofcourse
Steps to flash :
If you are in custom rom or stock rom steps are all same
boot to twrp
flash the zip
Do not wipe or erase anything all are automated , just reboot Twrp and flash the zip
PS: FULL STOCK ROM can take a little while to flash . have patience.
PSo not wipe or erase anything all are coded to be done automatically
just boot Twrp an flash the zip
Download Link : here
XDA:DevDB Information
Stock ROM and Firmware for TWRP, ROM for the Motorola One Power
Contributors
nageen9211, [email protected]
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2019-03-29
Last Updated 2019-08-19
Click to expand...
Click to collapse
hi i am bricked my moto
now i back to fast boot mod
how can i flash stock rom by twrp?
help me
i am horrified to brick my device again
My Poco sensors stoped working while o was flashing some ROM I don't remember but it was maybe an sGSI.
After flashing alot of vendors on miui or pixel e, iam still facing the same issue.
Any help would really be appreciated
Stock with miflash.....and always backup...lesson learned
seems like persist.img is corrupted!
if you have fastboot rom (miui10.3.7 (2.7gb) , extract it, and further extract it, i will come something 8 gb in total!
inside images folder there will be persist.img
flash that img file, in TWRP /persist PARTITION (BE CARE FUL !!!!!!!!!!!!!!!!)
or better use ORANGE FOX RECOVERY to flash PERSIST.img
then reboot device and check!
if it still doesnt work then use miflasher, and flash this FASTBOOT rom from image folder!
REMEMBER!!!!!!!! don't tick the box, "FLASH ALL AND LOCK" this will relock your bootloader! , simply select "FLASH ALL" button in miFLASHER (down-right)
YasuHamed said:
seems like persist.img is corrupted!
if you have fastboot rom (miui10.3.7 (2.7gb) , extract it, and further extract it, i will come something 8 gb in total!
inside images folder there will be persist.img
flash that img file, in TWRP /persist PARTITION (BE CARE FUL !!!!!!!!!!!!!!!!)
or better use ORANGE FOX RECOVERY to flash PERSIST.img
then reboot device and check!
if it still doesnt work then use miflasher, and flash this FASTBOOT rom from image folder!
REMEMBER!!!!!!!! don't tick the box, "FLASH ALL AND LOCK" this will relock your bootloader! , simply select "FLASH ALL" button in miFLASHER (down-right)
Click to expand...
Click to collapse
mi flash failed to do the job and came out with error. booted fine but sensors still broken.
twrp and orange fox have no persist.img chose when flashing.
anyways thx 4 help. i hope i can get out outta this:crying::crying:
iam using miui 9.6.18 bcz i want oreo
lokixd4x4 said:
mi flash failed to do the job and came out with error. booted fine but sensors still broken.
twrp and orange fox have no persist.img chose when flashing.
anyways thx 4 help. i hope i can get out outta this:crying::crying:
iam using miui 9.6.18 bcz i want oreo
Click to expand...
Click to collapse
according to this video https://youtu.be/JKShaUdpvQw?t=374 its platform file issue,
download latest version from
https://forum.xda-developers.com/android/software/tool-platform-tools-adb-fasbootdrivers-t3061441
extract platform folder, put FASTBOOT FILES of MIUI rom in Platform folder and then try flashing
also
put everything in root C:/ and only one folder "C:\images"
long paths are not recomended for MIflasher!
@YasuHamed bro I am facing the exact same issue with a window popup on screen says find device is corrupted your device is unsafe now. Did you find a solution . Please help .brother.
abhisheksh9999 said:
@YasuHamed bro I am facing the exact same issue with a window popup on screen says find device is corrupted your device is unsafe now. Did you find a solution . Please help .brother.
Click to expand...
Click to collapse
i gave up and started using custom roms! they are closer to Stock android and have amazing customizations!
Evolution / Havoc / AeX on android 10 is amazing!
Reloaded OS (android10) is CAF based rom and its faster than others but have no customizations!
CR droid has maximum customizations but its little laggy!
you may also use
Masik13.3 and XiaomiEu roms which are Modified MIUI versions! ( google MIUI ROM BUILDER) and you can predefine features!
these roms can them be flashed via Twrp!
lokixd4x4 said:
mi flash failed to do the job and came out with error. booted fine but sensors still broken.
twrp and orange fox have no persist.img chose when flashing.
anyways thx 4 help. i hope i can get out outta this:crying::crying:
iam using miui 9.6.18 bcz i want oreo
Click to expand...
Click to collapse
Did you find any way to fix the sensors?
I think i too made the same mistake some two months back after flashed peplus rom.. i noticed it only recently.
Hello ,
I need to receive the 10.3.8 Miui stable update ( yes still on 10.3.6 ) ,
I have TWRP and rooted using Magisk …
So Can I just download the full Rom ( 1.8 GB ) , then install it using TWRP recovery ?
I mean is it as simple as that ? or I have to flash or do anything else like lazyflasher in order nor to bootloop or brick my phone ?
You can download the entire ROM which is based on MIUI 11. Reboot to recovery, clean everything for smooth operation. Flash the new MIUI ROM and do not reboot to the system or you might lose TWRP recovery. Go back and flash TWRP recovery image again and then reboot to recovery once. Then reboot to system.
MIUI 10
Global
or
EU
MIUI 11 update
Global
or
EU Beta
Dirty flash if you stay on MIUI 10 (Format Dalvick/cache/System)
Clean Flash if you go on MIUI 11 (Format Dalvick/Cache/System/Data) (I prefer format internal storage to start with new OS)
I didnt loose TWRP with full wipe
VeerAmrit said:
You can download the entire ROM which is based on MIUI 11. Reboot to recovery, clean everything for smooth operation. Flash the new MIUI ROM and do not reboot to the system or you might lose TWRP recovery. Go back and flash TWRP recovery image again and then reboot to recovery once. Then reboot to system.
Click to expand...
Click to collapse
Thank you VeerAmrit for your reply .... I don't mind losing TWRP as I can Flash it again .
All what I am afraid of is that I read in another thread ( and other blog that I need to flash something called Lazy Flasher If I want to go with this method , otherwise I would go into boot loop ...
This part was written
(Now again go back, select Install and select the LazyFlasher .zip file. And the Swipe to confirm flash.
This step is very important, if you don’t do this, your device will be stuck in bootloop. The LazyFlasher .zip file skips the Android security check and allows the phone to boot, if you don’t do this, your phone won’t boot as it won’t be able to pass the security check.)
So I decided to ask before doing anything because this Lazy Flasher is not working anymore as per what I know .
Mastakony said:
MIUI 10
Global
or
EU
MIUI 11 update
Global
or
EU Beta
Dirty flash if you stay on MIUI 10 (Format Dalvick/cache/System)
Clean Flash if you go on MIUI 11 (Format Dalvick/Cache/System/Data) (I prefer format internal storage to start with new OS)
I didnt loose TWRP with full wipe
Click to expand...
Click to collapse
Thank you So much Mastakony for your help and links , I really appreciate .
As per Miui 11 I prefer to wait for the stable final version , as this version is called Stable Beta .
So I decided to go to 10.3.8 first , then to 11 when it is available final version .
( BTW can I go to 11 directly without 10.3.8 at all ? )
Also Mastakony please read my above reply to VeerAmrit and help my with this issue please .
Thank you in advance
AhmedPower said:
Thank you VeerAmrit for your reply .... I don't mind losing TWRP as I can Flash it again .
All what I am afraid of is that I read in another thread ( and other blog HERE ) that I need to flash something called Lazy Flasher If I want to go with this method , otherwise I would go into boot loop ...
This part was written
(Now again go back, select Install and select the LazyFlasher .zip file. And the Swipe to confirm flash.
This step is very important, if you don’t do this, your device will be stuck in bootloop. The LazyFlasher .zip file skips the Android security check and allows the phone to boot, if you don’t do this, your phone won’t boot as it won’t be able to pass the security check.)
So I decided to ask before doing anything because this Lazy Flasher is not working anymore as per what I know .
Thank you So much Mastakony for your help and links , I really appreciate .
As per Miui 11 I prefer to wait for the stable final version , as this version is called Stable Beta .
So I decided to go to 10.3.8 first , then to 11 when it is available final version .
( BTW can I go to 11 directly without 10.3.8 at all ? )
Also Mastakony please read my above reply to VeerAmrit and help my with this issue please .
Thank you in advance
Click to expand...
Click to collapse
For your satisfaction, you can flash 10.3.8 first and then flash miui 11. You can directly flash it as well which I did. No need to flash any lazy flasher or anything just directly flash the ROM from TWRP. That post is from 2017 and not for Poco.
VeerAmrit said:
For your satisfaction, you can flash 10.3.8 first and then flash miui 11. You can directly flash it as well which I did. No need to flash any lazy flasher or anything just directly flash the ROM from TWRP. That post is from 2017 and not for Poco.
Click to expand...
Click to collapse
Thanks so much for your help
Hi all and sorry for my bad english in first!!
i live in italy and i've buyed(but still not recieved) one oneplus 9r from china whit oxygenos rom on board..
When it comes i want to root & debloat it, but i've some queustion cause in last year i've used only device with custom rom!.
first of all i wan't to root the phone, but preserve the possibility to update the OS with ota. if i understand right it's possible with magisk, can please someone tell me the correct step to make?
after root i vant to uninstall not necessary app for my utilization (facebook/instagram/netflix, red cable and oneplus account, google app, gdrive, google photo and most of BigG apps cause i'm using only gmail/yt/maps/ an store!).
the question is.... if i uninstall this app it will be re installed in future ota?
Thanks in advice!
Step1 : unlock bootloader, this will wipe the storage, then setup the device once again then enable usb debugging in developer options.
You can use this
Tool to make (tool all in one) your life easier : https://sourceforge.net/projects/tool-all-in-one/files/TOOL_ALL_IN_ONE_1.0.6.1.zip/download
you should select 8t as 9r is not supported officially
at the moment.
Step2: update the phone to latest version , right now it's 11.2.5.5
Step 3: download the same version of the oxygen is ota wether from xda, OnePlus official site , oxygen updater ( make sure it is full version).
Step4: on pc now extract only the payload.bin file in the input of the payload extracter ,
Now use the payload extracter ,
Run .exe and get boot.img .
payload_dumper_tool_by_ius.zip
drive.google.com
(MAKE SURE THE PHONE OS VERSION AND BOOT IMG VERSION IS SAME)
Step 5: install magisk manager on phone, now patch the boot.img that you extracted earlier. Copy this patched boot.img in platforms tool folder(I hope that u have installed the platform tools and adb & fastboot ).
Step 6: open terminal there in platform tools , use the tool all in one to boot your phone in fast boot mode,then flash patched boot.img using.
Fastboot devices
Fastboot flash boot_a patched.img
Fastboot flash boot_b patched.img
Bingo got rooted.
Step 7( optional) : now properly restart the phone by opening magisk , then install universal safety net fix, debloat modules in magisk.
You can use lucky patcher to debloat unnecessary things (which don't exist as it is oxygen os)
Now in future if your phone gets ota make sure you disable all magisk modules then download the full version of ota from oxygen updater & update it locally & do not restart.
go to magisk ,
flash magisk to inactive slot.
restart now,
REnable the modules. (Tip don't enable the lucky patcher module this will put you in bootloop)
enjoy the ota .
@Rajveer chauhan
Do you have instructions to install TWRP?
I even tried to read the thread on the 8t forum, but I didn't understand it very well.
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Rajveer chauhan said:
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Click to expand...
Click to collapse
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
lvints said:
@Rajveer chauhan
Do you have instructions to install TWRP?
I even tried to read the thread on the 8t forum, but I didn't understand it very well.
Click to expand...
Click to collapse
lvints said:
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
Click to expand...
Click to collapse
Way better than twrp just follow the steps u won't lose anything
lvints said:
Is Orange Fox easy to use as TWRP?
Just flash via fastboot? Because I want to keep magisk/root.
Click to expand...
Click to collapse
So how did it go?
Rajveer chauhan said:
So how did it go?
Click to expand...
Click to collapse
I've already downloaded the files, but I haven't tested them yet.
I'll leave it for the weekend, if there's a problem I can solve it with peace of mind.
Sir have you tried changing the font of your 9R?
I've been looking on the magisk forums or some app but I haven't had success.
Yeah I actually use the Einstein font the font manager by androidacy seems to work for me.
Rajveer chauhan said:
Yeah I actually use the Einstein font the font manager by androidacy seems to work for me.
Click to expand...
Click to collapse
I tried this module too, only with Komika font, my favorite.
What version of the module do you use? I tried with the last one (5.5.6) and the font doesn't seem to have been applied.
I'm on OOS 11.2.7.7.
Same version
lvints said:
I tried this module too, only with Komika font, my favorite.
What version of the module do you use? I tried with the last one (5.5.6) and the font doesn't seem to have been applied.
I'm on OOS 11.2.7.7.
Click to expand...
Click to collapse
.
Rajveer chauhan said:
So, 1st of all make sure u are on oos , then simply boot in to bootloader then flash this ofox img file , using the command
fastboot flash recovery name.img then boot into recovery it will ask u your screen lock, then flash this ofox zip file .
this or any recovery are in beta phase , everything works but not 100/100 times.
unzip this and flash the img cuz the img could not be uploaded
this will only work on oos not on any custom rom, uwill not require to format data
& trust me i am not a hacker
Click to expand...
Click to collapse
I flashed the img file and it booted to OrangeFox but I cannot press anything as the screen does not react. What is the solution for it?
It's is compatible with oos 11
Not with oos 12, any custom roms
Rajveer chauhan said:
It's is compatible with oos 11
Not with oos 12, any custom roms
Click to expand...
Click to collapse
I was on OOS 11. The 11.2.8.8.LE28DA.
Flashed it, boot up but cannot press anything. How can I go back to the original boot?
U can unzip the payload.bin and extract the recovery file and flash it in the bootloader and everything goes normal
Rajveer chauhan said:
U can unzip the payload.bin and extract the recovery file and flash it in the bootloader and everything goes normal
Click to expand...
Click to collapse
Thanks I got back to the original boot, but now how can I root with Magisk?
@Rajveer chauhan
Hello sr
Have you updated your 9r for A12 ? If yes, how did you do it? Would it be possible to go from A11 (11.2.8.8) to A12 (C.33)?