Major Problem with my Samsung Galaxy Pocket GT-S5300 (Won't boot , bricked partition) - Android Q&A, Help & Troubleshooting

Hi i am newbie this forum i have an problem with an android gingerbread isn't booting and didn't vibrate show samsung logo or anything battery charging now show and when i connect to my windows it sounds device connected / disconnected and when on Device manager is "Unknown Device" It's one of seriously problems because maybe android plays with unmount system / partition 4025 MB or something from clockwork recovery now the system cannot be reinstalled , booting into recovery , download or anything and ODIN Didn't show ID / COM .Does this think happened to you press the button / plug in charger and nothing happened .I Also installed Android ADB Driver upon adb devices command it display error no device found I Try to find a way to repair myself without to take the old device to an repair shop to replace the android piece memory that i don't know where is located.If is an way to fix that i will say thanks.Sorry for bad post but my phone didn't do anything it have problems.What i will do , no one of the youtube tutorials helped much.It does not boot loop anything like a blank screen not flash nothing happened. It does not have bootloader / fastboot / recovery / download mode anyone it's very bricked i cannot undo anything.
Thanks for reading this threat

Bump for help
Sorry if i bump so i need help with this device GT-S5300 for 5 years i must take tomorrow to repair service device so i have 2 pictures of my device that cannot boot into recovery and download mode. :crying:
What i will say not booting into recovery and download and boot is dead without os it cannot vibrate the android and show samsung logo
Here is pictures of android and proof not booting a lot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This device must be fixed with all costs so i am Romanian maybe chance to survive or fix is 10
Tommorow i will take it to repair and i explain the situation maybe i replace the motherboard aswell with gingerbread os 2.3.6 I Hope there is a chance to repair so good luck to me

Fixed GT-S5300 Unbricked motherboard
I have good news my motherboard has been changed and had an low price so the repair was successfully
My samsung have the last chance i guess so must avoid forced upgrades and force format because maybe bricking again so i root an flash zip and worked and partition fine
Now that problem has been resolved i must ask someone to end this topic :good:
Carefull gingerbread i warned myself :fingers-crossed::victory:

When I was at Junior High in 9th grade I broke my Samsung GT-S5300 due to improperly install of incorrect custom rom (lollipop) to my phone that's why the device can't read my sd card even the gallery is empty. I broke it on last 2017. And now 2022 I tried to repair it via odin because our school allow us to borrow a laptop (which is I don't have) then repair my phone there and boom! I got my Samsung GT-S5300 back again to normal. It's now 5 years old. I love that phone because it's so hard to break it. I remember I throw my phone and then it's still alive. Until now it's still alive (but the home key don't work) but I can still use it. My favorite phone is this samsung gt-s5300. I'm planning to buy the same phone like this but I can't find it in the market (because it's phased out or not available). By christmas I will buy Samsung GT-S5360 (even if I have much money I don't like luxurious phones).

Related

I9100G Dead

Hi
I have a Samsung Galaxy S2 I9100G in dead condition when i connect to pc it ask OPAM4430 driver. and i have installed but i cannot active it to download mode even i cannot see anything on LCD screen.
any on please help me to flash this phone with any rom.
Regards.
First of all, what did you do first? What I can say is try do this when phone is off. Power, volume up and home button at same time. See if this works. If you get, try selecturing wipe and see if the full wipe solve the problem.
Sent from my Galaxy Tab 8.9 using Tapatalk HD
A phone wont just die like that.If you did something to it then give some details althought it sounds like a kernel problem.The wipe idea is a good one,probably your best bet as you wont be able to use odin.Do a full wipe.
Boot to recovery (power+home+vol up)
Wipe cache partitiion,go to advanced and wipe dalvik cache (go back)
go to Mounts and Storage and format System,Cache,Data(go back)
Factory reset and reboot.If you get a bootloop then pull the battery,put it back in and reboot.
If you cant get to recovery or download you could try fussdownloader but im not sure if it works with the G model.Anyway the drivers can usually be found seperatelly and installed if you google for them but may or may noy not help.Worth a shot.
actually i got this phone from my friend and he say some one try to Nuke it i don't know how.and i cannot go to recovery mode by pressing volume down home key and power key also it not detecting on Odin
Regards.
pmmali said:
actually i got this phone from my friend and he say some one try to Nuke it i don't know how.and i cannot go to recovery mode by pressing volume down home key and power key also it not detecting on Odin
Regards.
Click to expand...
Click to collapse
Sounds to me like someone made a mistake trying to flash it and put the wrong firmware,or worse,the wrong kernel in Odin.Most people brick their i9100G phones with i9100 firmware.they are not compatable.The only thing I can suggest is try and find out if there is a RiffBox JTag service available for the G-series.It is for most other models.What it does is wipes and repairs the motherboard and bootloader.Ive had one done on an i9000 for 35 euros so its not an expensive job.Just need to find out if its available for your device.Ill leave a link below,Its an old one,but its a list of places world wide where they do it.If you dont see one close to you then use the page and google to search for one closer to your location.since this page was released the JTag has become more available in more areas.so you should find one close to you.good luck.
http://www.jtagbox.com/riff-jtag-bo...-bricked-phone-riff-box-owners-list/#comments
thank you very much for your clear reply and ill try and inform you.
Any one can give the correct jtaf pinout for i9100g
same problem for me, friend gived me i9100g bad flashed with i9100,
now it is dead and ask for omap4330 drivers when connected to pc.
It not go in download mode and not go in recovery.
I'm triyng to flash boot with riff but riff not detect it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
here are pinouts for @pmmali
how did you solder it??? its very tiny....
Lol.....VERY steady hand, a fine pointed soldering iron and a magnifying glass are all necessities.
Word of caution.....don't jtag if you want to send the phone to Samsung (under warranty).....they'll see that some "unofficial rework" has taken place and deny liability for warranty repair on that basis. ....
Sent from my Rooted, De bloated Stock JB powered S2 via PhilZ kernel and Tapatalk 2....

[Q] i9100p Bricked while recovering previous save of rom

Hi
I will try and list everything i can i suspect i will not be able to fix this but thought someone might have some insight as to how it happened.
Whats Wrong:
No signs of life, no boot screen, no recovery mode and no download mode. I have held down the reverent buttons for over a min and i get no response from the phone. Have checked its not just a flat battery, its been charging for 2 hours and same response whether plugged into charger or not.
What I was doing:
The Phone was the stock Rom that I had rooted (I use the orange signal boost app at home, and didn't want to lose it.) I decided to change the menu icons for my apps to a matching set and was using APK editor to do that. Knowing that messing with the signal boost app could mess it up I created a backup of the Rom using CWM before starting and then tried changing the icon and re-installing signal boost. It failed and the app would not run when I tried to re-install the original. So I booted into recovery mode and told CWM to recover from the backup i had created. I left the phone and when i came back it was blank and has been ever since.
Phone details
Orange Uk branded i9100p
running android 4.0.4 stock (rooted)
As I said I doubt this is an easy fix but if anyone can give me a hand i would be eternally grateful. Failing that is someone can shed some light on what went wrong so i can avoid it in the future that would be great to.
Thanks
Tom0468 said:
Hi
I will try and list everything i can i suspect i will not be able to fix this but thought someone might have some insight as to how it happened.
Whats Wrong:
No signs of life, no boot screen, no recovery mode and no download mode. I have held down the reverent buttons for over a min and i get no response from the phone. Have checked its not just a flat battery, its been charging for 2 hours and same response whether plugged into charger or not.
What I was doing:
The Phone was the stock Rom that I had rooted (I use the orange signal boost app at home, and didn't want to lose it.) I decided to change the menu icons for my apps to a matching set and was using APK editor to do that. Knowing that messing with the signal boost app could mess it up I created a backup of the Rom using CWM before starting and then tried changing the icon and re-installing signal boost. It failed and the app would not run when I tried to re-install the original. So I booted into recovery mode and told CWM to recover from the backup i had created. I left the phone and when i came back it was blank and has been ever since.
Phone details
Orange Uk branded i9100p
running android 4.0.4 stock (rooted)
As I said I doubt this is an easy fix but if anyone can give me a hand i would be eternally grateful. Failing that is someone can shed some light on what went wrong so i can avoid it in the future that would be great to.
Thanks
Click to expand...
Click to collapse
is your phone in warranty ?
also does it show any display wen u plug it on charging
also wen u put it for chargin leave it from 30 to 60 mins and check if the area near the camera is getting hot , if its gettin hot then u have hard bricked ur phone
if ur phone is in warranty u can head to service center for replacement jus don tell them what u ver actually tryin to do
or if its not in warranty then u can try getting ur phone to ur nearest jtaq center
Brickbug??
"To err is human, to forgive is divine"
Sent from my SGS II
try a USB jig.. does it work??
Listen to neo there.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from the little guy

[Q] Help, Samsung Galaxy Player 4.2 Bricked.

Okay so i have let this sit for a while now becuase i just said forget about it i will get a new one later in time. well i changed my mind. A while back i tried to root my Samsung Galaxy Player 4.2 (Model: YP-Gl1CB/XAA) And (I believe this is what happened) I didn't pay attention to what i was doing and i believe i replaced the boot-loader with a WIFI backup? I know chances are i cannot fix this and its garbage now but i would like to give it one more shot. hopefully if i didn't explain something up here the pictures will help.
Note: I used these following threads to attempt the root - http://forum.xda-developers.com/showthread.php?t=1884071 (zebluk) - http://forum.xda-developers.com/showthread.php?t=1885374&nocache=1 (alice90)
Screen-Shots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I also cannot connect it to my laptop, nor can i access download mode anymore. that is the only screen i have been able to access.
I know i didn't go into much detail. but if someone can help it would be much appreciated. also if anyone needs more detail i will be glad to add more.
EDIT: I have been able to get to the download mode main screen (press up to go into download mode or down to cancel and reboot.) but pressing up locks it up again.
FluzzyWuzzy said:
Okay so i have let this sit for a while now becuase i just said forget about it i will get a new one later in time. well i changed my mind. A while back i tried to root my Samsung Galaxy Player 4.2 (Model: YP-Gl1CB/XAA) And (I believe this is what happened) I didn't pay attention to what i was doing and i believe i replaced the boot-loader with a WIFI backup? I know chances are i cannot fix this and its garbage now but i would like to give it one more shot. hopefully if i didn't explain something up here the pictures will help.
Note: I used these following threads to attempt the root - http://forum.xda-developers.com/showthread.php?t=1884071 (zebluk) - http://forum.xda-developers.com/showthread.php?t=1885374&nocache=1 (alice90)
Screen-Shots:
I also cannot connect it to my laptop, nor can i access download mode anymore. that is the only screen i have been able to access.
I know i didn't go into much detail. but if someone can help it would be much appreciated. also if anyone needs more detail i will be glad to add more.
EDIT: I have been able to get to the download mode main screen (press up to go into download mode or down to cancel and reboot.) but pressing up locks it up again.
Click to expand...
Click to collapse
Dude you if actually did that you replaced your bootloader files the core of download/odin mode so you cannot flash any rom or kernel to fix that but i have had a similar problem on my 4.2 use this guide http://forum.xda-developers.com/showthread.php?t=2308221 from an experienced gp dev to fix mine (read through the comments) (i never replaced my bootloader files so i cannot guarantee this fix just had the error screen )but if you actually replaced your bootloader files you may have a hard bricked player try a usb jig it may not do much but you never know
niklus101 said:
Dude you if actually did that you replaced your bootloader files the core of download/odin mode so you cannot flash any rom or kernel to fix that but i have had a similar problem on my 4.2 use this guide http://forum.xda-developers.com/showthread.php?t=2308221 from an experienced gp dev to fix mine (read through the comments) (i never replaced my bootloader files so i cannot guarantee this fix just had the error screen )but if you actually replaced your bootloader files you may have a hard bricked player try a usb jig it may not do much but you never know
Click to expand...
Click to collapse
Actually i fixed it o-o sorry i did not update the post or anything. i couldn't find it but yeah. its fixed the only "lol" part about it, is that it has a Samsung galaxy s2 load screen thing? i think but works 100% now
FluzzyWuzzy said:
Actually i fixed it o-o sorry i did not update the post or anything. i couldn't find it but yeah. its fixed the only "lol" part about it, is that it has a Samsung galaxy s2 load screen thing? i think but works 100% now
Click to expand...
Click to collapse
Oh......Okay good for you :good:

Help with fixing hard bricked MTK phone (PhonePad Duo S7/M-PPAS7)

Hello everyone, i have hard bricked my PhonePad Duo S7 / ppxs7 (MT6737) while installing firmware update by accidentally unhooking the cable. I am wondering if anyone can help me fix this issue. The phone hardware is all in good condition but the software seems to be completely wrecked, the phone doesn't start at all no matter what combination of buttons and how long i hold it. I tried to flash it again, to no avail because my PC doesn't recognize the phone anymore. I tried to charge it and it didn't do anything either. When i connect the phone to the PC i hear the connection sound and a warning pops up "device not recognized", you can see it in the image i attached below ( also image of what it looks like now in device manager ). I am confident there is a way to fix this, i just need to find a way to make it recognizable once more. Ive sent an email to the manufacturer as well but i hope i might in the meanwhile find a solution as they are not guaranteed to respond, i do not have warranty on this phone. I would be extremely super thankful to any input related to my case.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As long the the hardware is not damaged, it is recoverable. First, are you unchecking preloader when flashing? If still it doesn't work., then keep phone charging overnight to see if you get a response. Other than that, you might have to get your motherboard replaced. :good:
minute214 said:
Hello everyone, i have hard bricked my PhonePad Duo S7 / ppxs7 (MT6737) while installing firmware update by accidentally unhooking the cable. I am wondering if anyone can help me fix this issue. The phone hardware is all in good condition but the software seems to be completely wrecked, the phone doesn't start at all no matter what combination of buttons and how long i hold it. I tried to flash it again, to no avail because my PC doesn't recognize the phone anymore. I tried to charge it and it didn't do anything either. When i connect the phone to the PC i hear the connection sound and a warning pops up "device not recognized", you can see it in the image i attached below ( also image of what it looks like now in device manager ). I am confident there is a way to fix this, i just need to find a way to make it recognizable once more. Ive sent an email to the manufacturer as well but i hope i might in the meanwhile find a solution as they are not guaranteed to respond, i do not have warranty on this phone. I would be extremely super thankful to any input related to my case.
Click to expand...
Click to collapse
Hope I helped.
I was experimenting on an old device (lenovo tab 2 a7 30hc) and hard bricked it.
I've been trying to install the stock rom from SP Flash tool and installed the mtk vcom preloader drivers but the phone still won't get detected.
Someone please help me out here please.
rishabhrocks said:
I was experimenting on an old device (lenovo tab 2 a7 30hc) and hard bricked it.
I've been trying to install the stock rom from SP Flash tool and installed the mtk vcom preloader drivers but the phone still won't get detected.
Someone please help me out here please.
Click to expand...
Click to collapse
Install vcom and Lenovo drivers.
minute214 said:
my PC doesn't recognize the phone anymore. I tried to charge it and it didn't do anything either. When i connect the phone to the PC i hear the connection sound and a warning pops up "device not recognized",
Click to expand...
Click to collapse
I had similar soft brick problem with MTK tablet. Generally you need to remove battery (or unplug the battery connector) and install (plug) it back. If your battery has soldered wires you need to unsolder Vcc (usually red) wire and solder it back after a while (like a couple minutes after). If your battery is not able to remove/unsolder/unplug your only solution is discharge the battery and it can takes a long time.

Starting a cracked phone ??

Hi all ! Mods please move the thread if its wrong place, excuse my inexperience
I have an old phone made in 2014 , LG-P705 . Recently i have realized i had much much important files in it .
Whatever.. The problem is the phone's screen was cracked completely tried to fix it , bought a screen from chinese market then i gave up on it in 2014.
So we have a phone that LCD screen won't work at all. But the motherboard has not taken any damage. I charged the phone and it is alive. It vibrates when i turn it on and off .
i want to boot this phone and take the important files out. Is there any possible ways that we could start it guys ?
I have some ideas but not enough knowledge nor i am geeky about this stuffs. I think we could do a kind of a "mirror" between the Computer and the phone so that we will be able to see the files from the computer. Will it work ? Will we be able to see the files in it from the pc without using the screen ?
I am open to ideas. I need some geeks around here
.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do you have a custom recovery installed on it? There's a chance it has mtp enabled. If you're in luck, starting it in recovery mode will have your phone boot up in an USB connectable mode. So if you can hold volume down + power, give that a try, wait a minute for it to boot in recovery and try connecting it with a USB cable. It's worth a shot.
Wrapped with delicious Fajita [emoji896]
Timmmmaaahh said:
Do you have a custom recovery installed on it? There's a chance it has mtp enabled. If you're in luck, starting it in recovery mode will have your phone boot up in an USB connectable mode. So if you can hold volume down + power, give that a try, wait a minute for it to boot in recovery and try connecting it with a USB cable. It's worth a shot.
Wrapped with delicious Fajita [emoji896]
Click to expand...
Click to collapse
Thanks for your reply.
Yes i probably do have custom recovery installed . I poked up with it at the time it probably has custom Rom and that android interface which lets you to get into the othercustom roms. So yeah.
I am currently using an iPhone ever since, So the current android charger is partly broken i must hold it upwards until it function properly. I will update it when i get a new charger . I may order some touchscreen plus LCD if i could find .
sbnumara said:
Thanks for your reply.
Yes i probably do have custom recovery installed . I poked up with it at the time it probably has custom Rom and that android interface which lets you to get into the othercustom roms. So yeah.
I am currently using an iPhone ever since, So the current android charger is partly broken i must hold it upwards until it function properly. I will update it when i get a new charger . I may order some touchscreen plus LCD if i could find .
Click to expand...
Click to collapse
An iWhat? Never heard of it. Must be some fake knockoff [emoji16]
Oh and if it doesn't have mtp enabled but you can access ADB (check with 'adb devices'), this command should work:
Code:
adb shell svc usb setFunctions mtp
If not, you could probably pull files manually. I'm not sure if it works on folders but it would look like something like this:
Code:
adb pull /storage/emulated/0/DCIM
Path could be a lot of things like /sdcard, /mnt/0, /mnt/sdcard, etc.
Wrapped with delicious Fajita [emoji896]

Categories

Resources